Ok well, after succesfully installing the original 2.2.2 rom through KDZ in emergency mod, i decided to roll back to 2.2, so i opened KDZ again and started flashing it.. well, at a point it just crashes.. I said "no worries, let's start over again".
I tried to flash again but i was getting multiple errors or crashes, so i decided to turn the phone off and unplug it from the USB.
After replugging, KDZ stopped recognising it and now im stuck at a forced emergency screen unable to flash the original rom back... any chance to fix it or it's definitely dead?
EDIT: By turning off the battery, disabling modem device on pc and connecting usb i could manage to start KDZ update. During the installation I got an error so I couldn't finish it. Tried many times without results. I was stuck in emergency mode. After doing the same steps, phone doesn't even turn on.. i guess it's a bye bye now :/
enriquez90 said:
Ok well, after succesfully installing the original 2.2.2 rom through KDZ in emergency mod, i decided to roll back to 2.2, so i opened KDZ again and started flashing it.. well, at a point it just crashes.. I said "no worries, let's start over again".
I tried to flash again but i was getting multiple errors or crashes, so i decided to turn the phone off and unplug it from the USB.
After replugging, KDZ stopped recognising it and now im stuck at a forced emergency screen unable to flash the original rom back... any chance to fix it or it's definitely dead?
EDIT: By turning off the battery, disabling modem device on pc and connecting usb i could manage to start KDZ update. During the installation I got an error so I couldn't finish it. Tried many times without results. I was stuck in emergency mode. After doing the same steps, phone doesn't even turn on.. i guess it's a bye bye now :/
Click to expand...
Click to collapse
follow error guide http://forum.xda-developers.com/showthread.php?t=883314
just follow some instruction for downgrading http://forum.xda-developers.com/showthread.php?t=1038338 like disabling modem,phone charge screen time out,lg pc suite ,removing sd card etc and then use the error guide
I Recommend do not switch phone off. There was some people, which done it and after they was not be able to turn it on again.
Click to expand...
Click to collapse
I guess this is enough
Will send it to LG tomorrow
I just wonder, will it be on warranty? There was no superadmin installed before it got bricked, and there was the official 2.2.2 rom on it. Can they know if before that I installed custom roms? If so, does anyone know how much I would have to pay to get it back working?
thanks in advance
enriquez90 said:
I guess this is enough
Will send it to LG tomorrow
I just wonder, will it be on warranty? There was no superadmin installed before it got bricked, and there was the official 2.2.2 rom on it. Can they know if before that I installed custom roms? If so, does anyone know how much I would have to pay to get it back working?
thanks in advance
Click to expand...
Click to collapse
Why were u downgrading when root for froyo 2.2.2 and 2.2.1 is available ?
You must try again by reading all the tutorials to bring back the dead phone. Its true that once you disconnected the phone, its not easy to bring back but try on other machine/pc. People has recover it even when they disconnect the phone.
Or
If you are taking it to LG service center, tell them you were updating the phone, but it crashed and didnt bootup. If they ask you anything about custom rom, tell them you dont know anything about that and this is your first android phone and they would repair it in warranty.
From my opinion, they will repair the phone as you haven't installed any recovery, rom yet.
If they are not repairing it in warranty, the charges could cost as much as you can buy a new phone.
Good luck.
Well the phone is not responding at all, tried to pull off the battery for many hours and then pull it back in to try charging it and next turn it on, but I didn't get the expected results..
"Good" new is that phone completely on stock settings as I just did the original 2.2.2 update and didn't have root and custom recovery aswell... they shouldn't be able to check if i had custom roms/recovery as mainboard should be completely gone :/
I will definitely take it to LG service next week in the spare time..
Related
ok. i;ve done it.
i tried to install v10c europe unbranded and kdz updater gave me a param error and now my phone is completly dead. it doesnt start at all.
can i recover it somehow?
kdz updater doesn't see it any longer.
Does it show anything at all. Does the screen display the LG or android logo?
Try the hard reset. Press Vol down+Home+PowerButton till you see the LG logo come up. If things are fine then the phone should reset itself to original state.
Best of Luck.
BTW, did you again flash in CDMA and DIAG mode?
it doesnt start at all.
i dont know how to enter emergency mode.
it doesnt hard reset or anything. it looks dead.
i flash in 3g and diag.
Pretty strange that nothing comes up.
Just to experiment, when you plug in the charger (AC) does the phone begin to charge (do you seen the battery indicator come up).
And hopefully someone more experience will turn up and help you. I really don't have much idea...
I think you will find this useful http://android.modaco.com/content/lg-gt540-optimus-gt540-modaco-com/321895/faq-gt540-reference-thread/
Remove battery and leave it few hours without it. After that run KDZ_UPD, configure (i think 3gs, diag, select FW - look on some how-to) without battery plug USB and press vol down+home and power on and still hold untill recovery appear. Then still try connect via KDZ.
I hope, that it will wokrs.
i will try to keep the battery out for a few hours.
i've tried to connect without battery and keep the buttons to start but with no luck.
the phone looks dead!
how can i enter emergency mode?
Is it start? Or if you press power button, is something happened or dipslay of phone is just black? If so, then probably nothing will help and you will have to send it to warranty service.
absolutly nothing happens. no power at all. not even when i plug in the charger.
will lg fix it for me? it was bought on 15 december this year, it has 3 days.
can they see that i have tried to flash another rom?
well that is why I don't play around with the kdz updater.
everyone ends up with their phone bricked at some point.
Try to get in emergency mode back+up volume+power.
Tell me if it works.
it doesnt get in emergency mode.
I had same problem with mine P500.I was tried to update to v10d something went wrong I got some errors and after few more tries my phone was completely dead.I was lucky and my phone was changed by operator.
I did some research before carrying it back to operator and it seems that the only way to resurrect phone is JTAG.But how to do it i have no idea if it can be done at all.
You can find some info here wiki.cyanogenmod.com/index.php?title=JTAG_for_Dream/Magic[/url
If emergency mode doesn't work....(wait for someone with more exp to post :/ )
Kdz updater working fine. I try 3 different fw and have no problem.
Sent from my LG-P500 using Tapatalk
Same as me. I flashed 2-tikes without any problema.
Sent from my LG-P500 using XDA App
tell me please. if the phone is dead like i say, can they see that i have flashed another rom?
or should i take it to warranty with no worries?
gangstar said:
tell me please. if the phone is dead like i say, can they see that i have flashed another rom?
or should i take it to warranty with no worries?
Click to expand...
Click to collapse
Hi i have got the same problem, you have solved? next week I go for assistance, we hope .. even if I pay ..
gangstar said:
tell me please. if the phone is dead like i say, can they see that i have flashed another rom?
or should i take it to warranty with no worries?
Click to expand...
Click to collapse
Since you were flashing with original LG firmware, they shouldn't raise much issue. Just don't tell them that you used the KDZ updater....
BTW did you try the CS_Emergency under Phone Mode in the KDZ updater.
also dont give them the guilty look
the phone is completly dead, not detected by computer, even when i plug it in without battery holding vol up+back. NOTHING.
i think i will not have a problem at warranty because i think that the mb is surged, they dont have how to see that i have flashed, an official rom after all.
now, shoul i take it to lg? or to the retail store?
First, please, I tried tons of different things. I'm a linux kernel hacker too, although I never hacked android related stuff yet.
When I try to turn the phone on, it just quickly blinks the green line, vibrate and nothing else happens.
It was running firmware version 1.6 fine until I tried to upgrade the phone using a windows xp running in a vmware VM. I tried companion, SEUS and FlashTools. All left the phone running with the yellow exclamation mark after.
I continue trying to flash it until suddenly even the exclamation mark stopped showing up.
After that I moved to a native windows installation and SEUS went all the way through updating the phone, but the phone never turned on again. It just happened what I described above.
I already tried everything I came across with in the forums: flashing versions 2.1 and 1.6 from different places, with different versions of the FlashTool, and SEUS, and the companion .... it always goes all the way through, saying all ok, but when I turn on the phone: same-o. just quickly blinks, vibrate and dies.
Any idea? had I really hard broken my phone?
Please, any direction would do.
Interestingly - I have excatly the same situation with my partners phone. Attempted to downgrade to 1.6 using a couple of methods - editing build.prop and then SEUS and flashing this firmware.
Problem I have now is SEUS says I have the latest firmware and doesn't offer an update - I guess this is because the version of the software that is installed is higher than what is currently avaiable to the CDA I have put in the build.prop
Next I tried putting 2.1 back on from this thread.
The phone will not boot still it does excatly what you have said - blinks, vibrates and then turns off!
Thank you for the reply. It is good to know Im not alone
In my case SEUS always says there is a newer version and flashes the phone. It goes all the way to the end and says the upgrading was successful.
Would it be possible that although the phone "accepts" being flashed, it is not actually writting anything to a persistent state?
Is there a way to verify if what I flashed is really there? Otherwise SEUS should way nothing to upgrade, since it already did it all the way through successful.
easy question:
are you sure you have battery remaining to start it up and flash? if not, try to charge the battery on another phone.
I guess so.
I'm using a multimeter to measure the power of the battery, which varies from 3.6 to 4.1 volts, depending on how long I leave it on the charger.
So although the phone gives no indication of being charged, I guess that measure is enough to say it is being charged, right?
I've even just tried Omnius Server, which flashed perfectly fine, but still the phone won't boot Its completely dead now
Yep. I also tried that. Wasted money..
So far no change.. the thing is still a brick.
.. well, a brick is at least heavy enough to actually deal some damage when thrown..
Hah Just getting it exchanged now - tried everything - given up!
well, just in case you have it on warranty, go ahead
take it to the shop
repair
stop wasting time and money... go to a GSM SERVICE... you need service tool to revive your phone if it's deadboot...
i use setool to flash sony-ericsson phones and it's the best flash tool...
if it's bootfcked, then you need jtag's...
@sanyyous
setool will flash the phone just like SEUS or FlashTool will, right? or it will do some other kind of flashing witchery?
and jtag you mean hardware debug and service, right?
the issue is: I bought the phone in London and I'm in Brazil now. So either I fix or I see a trash bin in this little x10's fate.
setool flashes the same way than my tool,but it has more tricks afterwards for some other things.
For me it sounds like :
1.) False USB-Port or Cable
2.) False nand
Please try to following:
Go into your car with a laptop and flashtool on it -> Start the engine and pull down the AC to the coldest state it can do.
hold your phone DIRECTLY with the battery in Front of the cold airstream.
Flash it now
I have recovered a few dead phones so, the problem is that they get too hot and the nand shows errors while temporary placing the flashimages -> If so the loader rejects the image because of checksum fail.
-> Give it a try, if it don't work you have to send it to service.
Regards
Bin4ry
Man.. I will try as soon as I get home... and if it works.. expect a good donation.
Out of curiosity - did it work?
Sent from my X10i using Tapatalk
I still couldnt try.
In Italy now. I'm going back to Brazil only Feb 3rd.
Meanwhile I'm trying to convince my gf that she couldnt break the phone even further for trying. Hopefully I'll lure her into doing it until this weekend.
Firgers crossed.
Bin4ry said:
setool flashes the same way than my tool,but it has more tricks afterwards for some other things.
For me it sounds like :
1.) False USB-Port or Cable
2.) False nand
Please try to following:
Go into your car with a laptop and flashtool on it -> Start the engine and pull down the AC to the coldest state it can do.
hold your phone DIRECTLY with the battery in Front of the cold airstream.
Flash it now
I have recovered a few dead phones so, the problem is that they get too hot and the nand shows errors while temporary placing the flashimages -> If so the loader rejects the image because of checksum fail.
-> Give it a try, if it don't work you have to send it to service.
Regards
Bin4ry
Click to expand...
Click to collapse
If this works, it's a miracle.
Maybe trying the fridge would have the same result, but all that ice could damage the phone .
Good luck and I really want to know if it works.
Yeah, on the fridge the moisture would probably ruin the phone even further. .. if thats at all possible.
And believe me, no one would wanna see if it works more than me.
<girlfriend-apeal>
you see, everyone wants to know if that works. please, you wont ruin the phone further just by trying it )
</girlfriend-apeal>
My wife's x10 is OK, so it would just be out of curiosity for me .
Good luck.
I got my gf to try but it didnt work
I'll try it myself when I get home next week, but I dont think thats gonna work..
Anyway, I drop by next week to comment on the final status.
Thanks for the replies so far.
fabioroger said:
First, please, I tried tons of different things. I'm a linux kernel hacker too, although I never hacked android related stuff yet.
When I try to turn the phone on, it just quickly blinks the green line, vibrate and nothing else happens.
It was running firmware version 1.6 fine until I tried to upgrade the phone using a windows xp running in a vmware VM. I tried companion, SEUS and FlashTools. All left the phone running with the yellow exclamation mark after.
I continue trying to flash it until suddenly even the exclamation mark stopped showing up.
After that I moved to a native windows installation and SEUS went all the way through updating the phone, but the phone never turned on again. It just happened what I described above.
I already tried everything I came across with in the forums: flashing versions 2.1 and 1.6 from different places, with different versions of the FlashTool, and SEUS, and the companion .... it always goes all the way through, saying all ok, but when I turn on the phone: same-o. just quickly blinks, vibrate and dies.
Any idea? had I really hard broken my phone?
Please, any direction would do.
Click to expand...
Click to collapse
i tried to install the gingerbread theme but after i moved the framework file into system/framework folder my phone rebooted by itself and blocked to SE logo screen.... i wanna flash the phone but i'm unable to switch usb debugging mode on..... any suggestions to turn the usb debugging on or flash the phone witout it....???? tnx in advance 4 any suggestion
Hi Guys,
I'm guessing that there's nothing that can be done but last hope!
Last night i was trying to update my Gf's Optimus One with little success using KDZ, got to the point where it wouldnt boot, so flashed the original ROM back to it, during the process after a few minutes it gave an error code and the Flash was unsuccessful. Thought' id' reboot the phone into Emergency and try the flash again - it errored pretty much straight away - Pulled battery from phone - reinserted it and now nothing!
The phone will not respond to power on, USB insert, etc Just completely dead..
Im guessing i know the answer already - but is there anything that can bring this back from the dead.... Seriously in the Doghouse!
Cheers
Paul
This is Dev section , please post in general section !!
Sent from my LG-P500
Sorry - Can a mod please move this to the correct place.
Don't u have warranty???
Sent from my LG-P500 using Tapatalk
I bricked my phone the same way.
I was trying to flash the original russian Gingerbread with LGMDP and there was a cable connection problem... I chose to erase all data before flashing (EFS Erase ALL). If only mobile devices had BIOS...
No hope, unfortunately. You have to connect your chipset to a computer and manually write all data... Or send to LG Service Center. Just hope they'll fix it for free... (They can't detect how you wiped device's boot loader if all the flash memory is empty)
paulrgod said:
Hi Guys,
I'm guessing that there's nothing that can be done but last hope!
Last night i was trying to update my Gf's Optimus One with little success using KDZ, got to the point where it wouldnt boot, so flashed the original ROM back to it, during the process after a few minutes it gave an error code and the Flash was unsuccessful. Thought' id' reboot the phone into Emergency and try the flash again - it errored pretty much straight away - Pulled battery from phone - reinserted it and now nothing!
The phone will not respond to power on, USB insert, etc Just completely dead..
Im guessing i know the answer already - but is there anything that can bring this back from the dead.... Seriously in the Doghouse!
Cheers
Paul
Click to expand...
Click to collapse
read downgrading details along with error thread it will definately come back to life http://forum.xda-developers.com/showthread.php?t=1038338
http://forum.xda-developers.com/showthread.php?t=883314
shhbz said:
read downgrading details along with error thread it will definately come back to life http://forum.xda-developers.com/showthread.php?t=1038338
http://forum.xda-developers.com/showthread.php?t=883314
Click to expand...
Click to collapse
Thanks for the links - i was working my way through the second one at 3am this morning.. Yes - i've even tried Shaking it
The P500 community has produced some wonderful guides and looking at it seems like the device is almost impossible to Brick completely, just how this happened i havn't a clue, seems ive managed the almost impossible..
I'd more than likely be able to ressurect it if it responded to anything at all - but no power, and nothing when the USB is inserted, no vibration, no lights, no signs of life...
the phone may be under warranty, but ive got to dig out the reciept - and i cant even begin to think where that is..
Well anyway i've had to buy her a replacement today - ended up with a Samsung Galaxy Mini as they dont stock the Optimus one anymore. Closest thing i could find.
Cheers for the help guys - i guess next effort will be warranty repair.
dude pls try uninstallin all the lg drivers usb etc etc and then try it again...it happend to me but ive still managed to ressurect it so try this and after send it to warranty
My optimus just got bricked very badly.
I flashed v10a through kdz to downgrade to old baseband.it all went well. Then i restarted the phone and it was stuck at bootloop. So i pulled out the battery and again it was stuck at bootloop. I thought i did something wrong while flashing . So i tried to reflash v10a through kdz. But then a dialog box came with an error. Then i tried to to flash v20b but the same error came again. My phone was still in emergency mode.
Nothing was working so i pulled out the battery and now its not responding at all.
Not switching on, my pc doesn't detect it , it doesn't charge when i connect it to a charger.
Please help me as you are my last hope.
royal.tarun said:
My optimus just got bricked very badly.
I flashed v10a through kdz to downgrade to old baseband.it all went well. Then i restarted the phone and it was stuck at bootloop. So i pulled out the battery and again it was stuck at bootloop. I thought i did something wrong while flashing . So i tried to reflash v10a through kdz. But then a dialog box came with an error. Then i tried to to flash v20b but the same error came again. My phone was still in emergency mode.
Nothing was working so i pulled out the battery and now its not responding at all.
Not switching on, my pc doesn't detect it , it doesn't charge when i connect it to a charger.
Please help me as you are my last hope.
Click to expand...
Click to collapse
Try reinstalling the LG drivers and try KDZ again. If success, and if it keeps loading the "android" animation, hard reset.
If all fails, LG is your only hope I guess
Its not meant sad, but i wonder why users are hopping every day/week from one rom to another only to try every unstable rom.
And no: i dont say it because i'm a developer - its pure logic i think.
andy572 said:
Its not meant sad, but i wonder why users are hopping every day/week from one rom to another only to try every unstable rom.
And no: i dont say it because i'm a developer - its pure logic i think.
Click to expand...
Click to collapse
I agree with Andy
andy572 said:
Its not meant sad, but i wonder why users are hopping every day/week from one rom to another only to try every unstable rom.
And no: i dont say it because i'm a developer - its pure logic i think.
Click to expand...
Click to collapse
Some developers just releases stuff fast...like fserve..no offence though.
here is what you should do:
1. download again the kdz file from the net (possibly you have a broken file)
2. close all LG icons from taskbar (lg updater, lg **** near of the clock) !!!
3. turn off firewall
4. plugin the phone via usb
5. start kdz
6. flash again kdz file
7. it should complete the update normally without problems
royal.tarun said:
My optimus just got bricked very badly.
I flashed v10a through kdz to downgrade to old baseband.it all went well. Then i restarted the phone and it was stuck at bootloop. So i pulled out the battery and again it was stuck at bootloop. I thought i did something wrong while flashing . So i tried to reflash v10a through kdz. But then a dialog box came with an error. Then i tried to to flash v20b but the same error came again. My phone was still in emergency mode.
Nothing was working so i pulled out the battery and now its not responding at all.
Not switching on, my pc doesn't detect it , it doesn't charge when i connect it to a charger.
Please help me as you are my last hope.
Click to expand...
Click to collapse
---------- Post added at 10:55 AM ---------- Previous post was at 10:53 AM ----------
by the way, i flashed like 10 times from 2.3.3 back to 2.2 via KDZ,
one time i had problems, i forgot to close LG updater or whatever it called, but after i closed it worked fine
i have flashed 2 times with kdz and both time i never went after lg logo i had to hard reset it and it did work after that, u shouldnt have flashed it again , if u had hard reset it would have worked.
royal.tarun said:
My optimus just got bricked very badly.
I flashed v10a through kdz to downgrade to old baseband.it all went well. Then i restarted the phone and it was stuck at bootloop. So i pulled out the battery and again it was stuck at bootloop. I thought i did something wrong while flashing . So i tried to reflash v10a through kdz. But then a dialog box came with an error. Then i tried to to flash v20b but the same error came again. My phone was still in emergency mode.
Nothing was working so i pulled out the battery and now its not responding at all.
Not switching on, my pc doesn't detect it , it doesn't charge when i connect it to a charger.
Please help me as you are my last hope.
Click to expand...
Click to collapse
Dude!! If you ever get bootlooped after flashing kdz, always hardreset your phone!!
Sent from my LG-P500 using xda premium
i had the same problem by flashing an other rom
i repaired it by flashing with LGMDP-v1.5
try this:
http://forum.xda-developers.com/showthread.php?t=1149530&highlight=baseband
Hi there,
I updated my o1 to the gingerbread version 2.3.3 V20G with KDZ update.
It stuck at the Emergency mode screen for very long time so I took the battery out . When i tried to turn on my o1, it won't turn on.
I tried to hard reset, change another battery but nothing happenned.
Now, my o1 seems to be dead.
Can anyone help me?
Sorry for my bad english.
danielthuy said:
Hi there,
I updated my o1 to the gingerbread version 2.3.3 V20G with KDZ update.
It stuck at the Emergency mode screen for very long time so I took the battery out . When i tried to turn on my o1, it won't turn on.
I tried to hard reset, change another battery but nothing happenned.
Now, my o1 seems to be dead.
Can anyone help me?
Sorry for my bad english.
Click to expand...
Click to collapse
Go to the LG Service and say that you was playing game and it freezed , you was scare and pull the battery out ... and if LG service ask you about rom upgrading or rooting , or KDZ , you have to say to them that you don't know everything.... why you have to go to LG , because you was use KDZ to upgrade and that's stupid... KDZ is very dangerous...it broke your phone mainboard ( all thing inside your phone is mainboard ).....
Sent from my LG-P500 using XDA App
Last week, I got in touch with root, recovery, custom ROMs and stuff aaaaand... then I got an error in KDZ and bricked my phone (stuck at emergency mode). For about 3 hours I had an expensive paper-weight. I just stayed calm (well, not THAT calm, but...) and after almost 3 hours of searching and trying all the possibilities of 'unbrick methods', I succeded.
Give us more details and you may not need specialized service to fix your phone.
- When you plugged your phone showing 'emergency mode', did your computer recognized it in some way?
(with 'recognized' I mean if Windows make a sound of 'device connected' and/or some lg modem appears on the device manager of Windows)
To me, it was recognized only after I removed the battery (thus making my phone in emergency mode turn off) and connecting the phone trough USB without battery. From this point, I just flashed a stock ROM with KDZ but, instead of selecting DIAG, I selected EMERGENCY.
If your phone gets recognized, remember to have the LG modem disabled like in any normal usage of KDZ
Now my phone is OK and I used KDZ many other times successfully.
(If you haven't seen already, it's very easy to find guides to unbrick the P500 - search this forum or google it).
If you're not sure you will be able to fix your phone anytime soon, keep it powered off to save the battery and give us more details about your problem, until you have in mind a possible solution.
You have a big chance of fixing your phone if it's only a software problem.
yuripg1 said:
Last week, I got in touch with root, recovery, custom ROMs and stuff aaaaand... then I got an error in KDZ and bricked my phone (stuck at emergency mode). For about 3 hours I had an expensive paper-weight. I just stayed calm (well, not THAT calm, but...) and after almost 3 hours of searching and trying all the possibilities of 'unbrick methods', I succeded.
Give us more details and you may not need specialized service to fix your phone.
- When you plugged your phone showing 'emergency mode', did your computer recognized it in some way?
(with 'recognized' I mean if Windows make a sound of 'device connected' and/or some lg modem appears on the device manager of Windows)
To me, it was recognized only after I removed the battery (thus making my phone in emergency mode turn off) and connecting the phone trough USB without battery. From this point, I just flashed a stock ROM with KDZ but, instead of selecting DIAG, I selected EMERGENCY.
If your phone gets recognized, remember to have the LG modem disabled like in any normal usage of KDZ
Now my phone is OK and I used KDZ many other times successfully.
(If you haven't seen already, it's very easy to find guides to unbrick the P500 - search this forum or google it).
If you're not sure you will be able to fix your phone anytime soon, keep it powered off to save the battery and give us more details about your problem, until you have in mind a possible solution.
You have a big chance of fixing your phone if it's only a software problem.
Click to expand...
Click to collapse
sadly, my phone is not recognized, it's nearly dead. Nothing happened when i touch every button.
It's very strange cause my last LG android phone, GW620, i used KDZ and LG utils to flash firmware almost every day but with P500, i just "update" and it turned to be a brick
So my o1 died? Can i do anything else before going to LG service center?
danielthuy said:
sadly, my phone is not recognized, it's nearly dead. Nothing happened when i touch every button.
It's very strange cause my last LG android phone, GW620, i used KDZ and LG utils to flash firmware almost every day but with P500, i just "update" and it turned to be a brick
So my o1 died? Can i do anything else before going to LG service center?
Click to expand...
Click to collapse
Nothing you can do now
Sent from my LG-P500 using xda premium