Related
Hi,
After changing my phone's date into the future, my G2 Touch told me there was an update available, so I told it to go ahead and apply it. When the phone rebooted it came up with this message:
E:No signature (218 files)
E:Verification failed
Installation aborted
I have nandroid installed on the phone. At least I think that's what's installed - I haven't played with any ROM stuff since November I think, when I changed the bootloader (I think - if that's what's giving me the option to do a nandroid backup now) and installed the newest T-Mobile G2 ROM.
Should the phone be able to install the OTA update, or will I have to replace the bootloader in order to get the OTA update on there? If I do have to replace the bootloader, will that require a full wipe?
James
Completely the same problem with HTC Hero after European OTA update. It has been rooted while ago (by following instructions from this forum) and now after setting up date in the future and confirming update, phone reboot and I get "Android System recovery" screen with menu and this message bellow it:
Build: CyaanogenMod v1.4 + JF
Finding update package ...
Opening update package ...
Veryfing update package ...
E: No signature (218 files)
E: Verification failed
Installation aborted.
Click to expand...
Click to collapse
I have the same problem (I did not write down the message, so I'm not sure which "Build:" was listed) .
The update fails, the phone reboots and then works under the old build. Under "settings/about phone" there is also no info about the update. Can one force the phone to download the update a second time? Would this help?
Bye
Nick
P.S. I'm running the phone in Germany over e-plus as network provider. The updates was done over a WiFi connection. The phone is not branded - was from the free market and not from a provider.
Hey,
got the same problem. At least I could extract the official OTA-update-zip to publish it here (see attachment)
There also is a "recovery.img" in the update zip, so I guess usually the OTA update will kill custom recovery bootloaders. We could replace the "recovery.img" in the zip with a hacked one before applying the update.
However first we should fix the verification error...
P.S.: Also Germany, not branded, Vodafone Network
Does anyone know if I will lose all my data if I reflash the original recovery.img onto my phone?
As I used flashrec to flash ra-recovery.img I keept all my data. So I don't belive you will lost any of your data except of your actual recovery image.
At last, we can try to flash origianl RUU, but with this we lost all our personal data.
----
I tried it. I installed flasrec.apk using ASTRO and used this app to flash the recovery.img from here mentioned/linked OTA update zip. Afterwards I changed date again and was able to install OTA Update without errors and loosing personal data. Now I'm without nandroid because of changing recovery image. Keep cool at this procedure installing these flashes takes long time in boot process - I was really near an hard reset ...
Flashing the original recovery.img should not be a problem.
However, I don't want to lose root access, and thus I will wait for the official HTC 2.1-update (hoping someone publishes it online) and then flash it by myself..
I don't mind losing root access at this moment (the reason I rooted my phone was to get wifi tethering but never got it working with a mac).
Since I am total noob with android stuff, I would highly appreciate some step by step instructions or link where I can find what to do. Thanks guys.
Hi, I've been trying to install the recovery.img from the update but I get this message with flashrec 1.1.3:
Code:
"Flash FAILED: Could not run command."
I'm using WWE 405.66 flashed with ra-recovery img 1.6.2... and the rom is rooted.
What am I doing wrong?
I can't even install ra-recovery with flashrec now and I have installed ra-recovery 1.6.2 this morning (I was using 1.5)
And yes, I know I'm going to lose ra-recovery.
rseffner said:
As I used flashrec to flash ra-recovery.img I keept all my data. So I don't belive you will lost any of your data except of your actual recovery image.
At last, we can try to flash origianl RUU, but with this we lost all our personal data.
----
I tried it. I installed flasrec.apk using ASTRO and used this app to flash the recovery.img from here mentioned/linked OTA update zip. Afterwards I changed date again and was able to install OTA Update without errors and loosing personal data. Now I'm without nandroid because of changing recovery image. Keep cool at this procedure installing these flashes takes long time in boot process - I was really near an hard reset ...
Click to expand...
Click to collapse
What was the rom you were using when you flashed the official recovery?
alvaritolalala said:
Hi, I've been trying to install the recovery.img from the update but I get this message with flashrec 1.1.3:
Code:
"Flash FAILED: Could not run command."
I'm using WWE 405.66 flashed with ra-recovery img 1.6.2... and the rom is rooted.
What am I doing wrong?
I can't even install ra-recovery with flashrec now and I have installed ra-recovery 1.6.2 this morning (I was using 1.5)
And yes, I know I'm going to lose ra-recovery.
Click to expand...
Click to collapse
Try the following:
- Copy the recovery.img to your SD card
- Turn off the phone, turn it on with Buttons "HOME"+"ONOFF" pressed such that the ra-recovery which you already have starts
- connect to your phone by cable using "adb shell"
- Then with root access you can flash the image by typing "flash_image recovery /sdcard/recovery.img"
This should do it
jamesots said:
Hi,
After changing my phone's date into the future, my G2 Touch told me there was an update available, so I told it to go ahead and apply it. When the phone rebooted it came up with this message:
E:No signature (218 files)
E:Verification failed
Installation aborted
I have nandroid installed on the phone. At least I think that's what's installed - I haven't played with any ROM stuff since November I think, when I changed the bootloader (I think - if that's what's giving me the option to do a nandroid backup now) and installed the newest T-Mobile G2 ROM.
Should the phone be able to install the OTA update, or will I have to replace the bootloader in order to get the OTA update on there? If I do have to replace the bootloader, will that require a full wipe?
James
Click to expand...
Click to collapse
hey,
I had same problem
go to All programs--> Recovery Flasher--> Restore backup
then restart and update OTA
Greetings from Zagreb, Croatia
Hey guys.
So, for those of you, who do NOT care about root for now, here's what worked for me:
1.: Download the zip-file with the OTA Update, mentioned on the first page and extract it.
2.: Connect your Hero to your PC and copy the recovery.img from the OTA onto your sdcard. Disconnect from computer.
3.: Boot your phone into the bootloader (Home + PWR).
EDIT: Now connect the phone to the pc again!
4.: open the command prompt of your pc, navigate to your Android SDK folder. (If it is not installed, download it and make sure you've got the needed drivers. Otherwise: Download them, using the Setup.exe from Android SDK)
5.: Here are the needed commands:
Code:
adb shell
$su
mount -a
flash_image recovery /sdcard/recovery.img
6.: reboot your phone after exitting the command prompt.
7.: Factory reset, reboot again
8.: And well, wait for the update-window again and be happy, now it should work
EDIT 2:
Any questions? Just leave a reply
@Revoluzifer
OK I did exactly as you explained, but having problem with su command:
Code:
C:\sdk\tools>adb shell
adb server is out of date. killing...
* daemon started successfully *
/ # su
su
/sbin/sh: su: not found
I know I know, you're going to say my phone is not rooted at all But believe me it was and some apps that require root access are there (screenshot, wifi tether etc.).
I even tried to find su cmd with find:
Code:
C:\sdk\tools>adb shell
adb server is out of date. killing...
* daemon started successfully *
/ # su
su
/sbin/sh: su: not found
But got nothing as you can see.
Ideas?
@dinke:
Which bootloader / recovery console is installed?
Means, what do you see, after booting with Home + PWR?
Also try to input $su instead of just su.
But first tell me your "hack" if any
@Revoluzifer
Thanks for quick reply
I see Android system recovery screen, not sure if this is nandroid or what but have this text on the screen with following options:
Android system recovery <2>
Use trackball to highlight;
click to select.
[Home+Back] reboot system now
[Alt+S] apply sdcard:update.zip
[Alt+W] wipe data/factory reset
[Alt+B] nandroid v2.2 backup
[Alt+R] restore latest backup
[Alt+F] repair ext filesystems
-------------------------------
Click to expand...
Click to collapse
And bellow menu there is build ID:
Build: CyanogenMod v1.4 + JF
I don't remember exact procedure that I applied for rooting hero, but I followed instructions from this forum (I can try by searching for exact thread if that may help you).
Edit: I applied root procedure by following instructions on these two links:
http://forum.xda-developers.com/showpost.php?p=4257045
http://forum.xda-developers.com/showthread.php?t=559613
That sounds just perfect
CyanogenMod 1.4 is exactly the same recovery console i have had before.
(Btw, Hero is not officially supported by CM anymore, had a nice discussion yesterday in cyanogen IRC )
So, try to use $su instead of su, that's what I typed and it all worked just great.
But you definitely first booted into bootload and then connected the phone to your pc again?
Tell me if this worked for you, please...
Greetz,
Sven
dinke said:
Code:
C:\sdk\tools>adb shell
adb server is out of date. killing...
* daemon started successfully *
/ # su
su
/sbin/sh: su: not found
Click to expand...
Click to collapse
Forget about the "su". You are already root.
(You can see this, as there's a '#' in front)
Just do the mounting and flashing
Oh... You're right, nerdture... didn't see the #
I *think* I've tried mount no matter of missing 'su' cmd and it didn't work either but will try again as soon as I manage to find some cable to connect hero with macbook (no longer nearby windows machine but have sdk installed on mac so should be working as well)
Revoluzifer said:
But you definitely first booted into bootload and then connected the phone to your pc again?
Click to expand...
Click to collapse
Yes
I installed Rom Manager and then downloaded the recovery for Samsung galaxy s2. When hit reboot into recovery. I am unable to perform any operations in CWM. I had to connect the phone via usb and issue a "adb reboot" command to get back.
How do we make cwm work.
http://forum.xda-developers.com/showpost.php?p=18160002&postcount=26
ptulluri said:
I installed Rom Manager and then downloaded the recovery for Samsung galaxy s2. When hit reboot into recovery. I am unable to perform any operations in CWM. I had to connect the phone via usb and issue a "adb reboot" command to get back.
How do we make cwm work.
Click to expand...
Click to collapse
Also must people are having issues flashing in cwm after using ROM manager. If you try installing from cwm and get verification error you needed to flash again then kernel and don't use ROM manager
Flashed CWM and nothing is happening
I flashed CWM Recovery 5.0.2.3 using the instructions here http://forum.xda-developers.com/showthread.php?t=1285823. However, when i go into CWM and select something the only thing that happens is the logo for CWM shows up with a black screen. When I push the power button again it will go back to the list.I am using the stock rom and it hasn't even been rooted yet. When I try to root using super one click, it gets stuck at step #5. Please Advise.
NDN
Dont use Rom Manager. It is known to have issues with the S2
I use CWM Manager and have no problems.....
noobdeeznutz said:
I flashed CWM Recovery 5.0.2.3 using the instructions here http://forum.xda-developers.com/showthread.php?t=1285823. However, when i go into CWM and select something the only thing that happens is the logo for CWM shows up with a black screen. When I push the power button again it will go back to the list.I am using the stock rom and it hasn't even been rooted yet. When I try to root using super one click, it gets stuck at step #5. Please Advise.
NDN
Click to expand...
Click to collapse
The key mapping is different. I had the same issue. Try the home key to select in place of the power button and the back key for back
Also if not rooted I do not think CWM will work...
Use this by Entropy512 it is flawless.
http://forum.xda-developers.com/showthread.php?t=1286432
SNadler said:
The key mapping is different. I had the same issue. Try the home key to select in place of the power button and the back key for back
That was it... THANKS!!!
Click to expand...
Click to collapse
SNadler said:
Also if not rooted I do not think CWM will work...
Click to expand...
Click to collapse
Root is having access to root account in os. It has nothing to do with cwm since cwm is loaded before the os loads.
They are irrelevant
Sent from my SAMSUNG-SGH-I777
Pirateghost said:
Root is having access to root account in os. It has nothing to do with cwm since cwm is loaded before the os loads.
They are irrelevant
Sent from my SAMSUNG-SGH-I777
Click to expand...
Click to collapse
In addition, all of our CWM-enabled kernels are "insecure" kernels - They give root at all times to ADB sessions, this is why SuperOneClick works after flashing them.
But only ADB sessions get root, so you use the "rooted" ADB shell to root the system partition. After that you've got perma-root until you nuke su and Superuser.apk from /system
Entropy512 said:
In addition, all of our CWM-enabled kernels are "insecure" kernels - They give root at all times to ADB sessions, this is why SuperOneClick works after flashing them.
But only ADB sessions get root, so you use the "rooted" ADB shell to root the system partition. After that you've got perma-root until you nuke su and Superuser.apk from /system
Click to expand...
Click to collapse
I think I am confused again?
When I flash a kernel, I have root. I have never used super one click. Just flashed your kernel. I thought that is what gave me root? Are you saying I still do not have root for /system files? Or does your kernel push su and superuser when it is flashed?
SNadler said:
I think I am confused again?
When I flash a kernel, I have root. I have never used super one click. Just flashed your kernel. I thought that is what gave me root? Are you saying I still do not have root for /system files? Or does your kernel push su and superuser when it is flashed?
Click to expand...
Click to collapse
Mine does, codeworkx's doesn't.
Setting a kernel to be insecure is a lot easier and takes less time than putting in a robust root-inject script.
SNadler said:
I think I am confused again?
When I flash a kernel, I have root. I have never used super one click. Just flashed your kernel. I thought that is what gave me root? Are you saying I still do not have root for /system files? Or does your kernel push su and superuser when it is flashed?
Click to expand...
Click to collapse
Entropy512 said:
Mine does, codeworkx's doesn't.
Setting a kernel to be insecure is a lot easier and takes less time than putting in a robust root-inject script.
Click to expand...
Click to collapse
Entropy512: Does this mean that codeworkx's kernel must be flashed with SuperOneClick in order to have complete root (to /system)... but with your kernels we don't need to flash SuperOneClick? If so, in order to unroot (without SuperOneClick) I suspect one would have to flash the non-root stock kernel? Thx
DoctorQMM said:
Entropy512: Does this mean that codeworkx's kernel must be flashed with SuperOneClick in order to have complete root (to /system)... but with your kernels we don't need to flash SuperOneClick? If so, in order to unroot (without SuperOneClick) I suspect one would have to flash the non-root stock kernel? Thx
Click to expand...
Click to collapse
Yes. (Unless you flash an su package with CWM instead of SuperOneClick)
Really, all SuperOneClick is doing are the following commands, assuming you've got a proper su binary and Superuser.apk:
Code:
adb remount
adb push su /system/xbin/su
adb shell chmod 6755 /system/xbin/su
adb push Superuser.apk /system/app/Superuser.apk
adb shell chmod 644 /system/app/Superuser.apk
Entropy512 said:
Yes. (Unless you flash an su package with CWM instead of SuperOneClick)
Really, all SuperOneClick is doing are the following commands, assuming you've got a proper su binary and Superuser.apk:
Code:
adb remount
adb push su /system/xbin/su
adb shell chmod 6755 /system/xbin/su
adb push Superuser.apk /system/app/Superuser.apk
adb shell chmod 644 /system/app/Superuser.apk
Click to expand...
Click to collapse
I understand (I think) that chmod 644 is to set the permission but what is chmod 6755?
SNadler said:
Dont use Rom Manager. It is known to have issues with the S2
I use CWM Manager and have no problems.....
Click to expand...
Click to collapse
I have downloaded CWM Manager and I have tried to install it but it has failed. Is there a different type of process to doing this other than opening it through root explorer?
what are you trying to do? just use the 3 button combo or extended power option to boot into recovery and flash away?
Ok, I am having a huge issue with trying to flash a custom rom. I will try to explain this the best way I can. I have had the same problem as above when trying to use CWM in recovery. Here is what I did:
- I unrooted my phone
- flash CWM with "SGH-I777_ClockworkMod-Recovery_5.0.2.3.tar"
- then it boots into CMW recovery and I can't do jack. When I try to select anything I just get a blank screen with the clock workz logo. If I hit the volume up and down buttons again the list of options comes back, but I will be stuck with the same situation if I try to select any options.
I was able to successfully root my phone in another instance using galaxys2root.com's method, however when I tried to use cwm I also ran into the same problem. I have yet to be able to use anything in cwm recovery. Please help me. I have flashed my phone multiple times and probably bricked it also. Luckily i haven't done any damage yet, but i would like to be able to flash roms. I am still kinda new to flashing roms, but i was able to flash my old infuse like a champ without any of these problems.
ducksauce88 said:
Ok, I am having a huge issue with trying to flash a custom rom. I will try to explain this the best way I can. I have had the same problem as above when trying to use CWM in recovery. Here is what I did:
- I unrooted my phone
- flash CWM with "SGH-I777_ClockworkMod-Recovery_5.0.2.3.tar"
- then it boots into CMW recovery and I can't do jack. When I try to select anything I just get a blank screen with the clock workz logo. If I hit the volume up and down buttons again the list of options comes back, but I will be stuck with the same situation if I try to select any options.
I was able to successfully root my phone in another instance using galaxys2root.com's method, however when I tried to use cwm I also ran into the same problem. I have yet to be able to use anything in cwm recovery. Please help me. I have flashed my phone multiple times and probably bricked it also. Luckily i haven't done any damage yet, but i would like to be able to flash roms. I am still kinda new to flashing roms, but i was able to flash my old infuse like a champ without any of these problems.
Click to expand...
Click to collapse
Use the home soft key to select stuff in CWR, not the power button.
Sent from my SGH-I777 using XDA App
i didnt read all of the posts until after i posted. thanks for not slashing me. so it looks like i use the home button to select then the back button still goes back. got it.
On a side not, I do not remember reading about that within the posts for rooting and flashing clockworkz. I tend to skip over things when reading, but I think someone should put that in big fat red letters "USE HOME BUTTON TO SELECT".
Hi, Guys today I m going to show you how to root/ unlock bootloader/ Install CMW recovery / Install cm 10/11/AOKP/ Packman roms on your Lg l9 p765 , This tutorial is for complete noob, nothing to worry about, just follow the process, you will find it very easy, so lets get start
Before going to start remember
Lg P760= Lg p765- Nfc chip ( So dont get confuse in nos)
Lg L9 kit
https://drive.google.com/file/d/0B62BCAo0zJcASk1xWkhCTnFhUUk/edit?usp=sharing
Above zip file contains all necessary files
1) Vroot application
2) Root files
3) CMW 6.0.4.5
4) Fastboot driver
5) Lg L9 Drivers
So Download it & Extract on Drive
Before going to do anything, You must install driver first, So just double click on Lg Driver.exe in extracted folder, Follow the process n ur done
Now lets root our Device
1) Now go to extracted, Double click on v root.exe, Install it,
2) Open Vroot Application
3) Now enable USB Debugging on your Handset, Go to developers options Enable debugging
4) Now connect your phone via Usb cable
5) V root will automatically detect your phone
6) Now hit on green root button,
7) Application will show you root succesfull n your phone will reboot ( or may be not)
8) After reboot you will find couple of chinese application installed, just ignore that, install super su from google play & unistall
those applications,
9 )Done, Now you have rooted phone
Next step is unlocking Bootloader
1) Now go to extracted folder, Find root files folder, copy folder & paste it in your system drive ( In my Case c Drive)
2) Now connect you phone with usb debugging on
3) Now double click on open commant prompt
4) Now u have to enter following command ( type or paste ur call)
adb reboot oem-unlock
hit enter, ur phone will reboot into botloader mode,
now press volume up to unlock boot loader, after pressing vol + u will enter in fastboot mode
means ur bootloader is unlocked, done
at this time ur pc will detect ur phone as androide device, it will install driver automatically, if dont, then go to device manager, select androde
device, right click, update driver first select search automatically, if this process failed then u have to select brows my computer option, then
navigate to fasboot folder in extracted folder, this will install fasboot driver on ur device, now ur ready to install recovery
Now its time to Install CMW recovery
1) when ur in fastboot mode dont power off
2) Now u have to enter following command to install CMW recovery
fastboot flash recovery recovery-clockwork-touch-6.0.3.1-p760.img
hit enter & Done, congrats now u succesfully Install cmw on ur phone
3) now enter fastboot reboot to restart ur phone
4) at this stage ur phone will be factory reset, so let the process complete
5) Now u can install CM 10 varients on ur device with this recovery
6) To install cm 11 varients u need to update recovery, for dat install super su & Goomanager on ur device
7) then copy cmw 6.0.4.5 zip on ur ext sd
8) then open Goomanger press reboot recovery, u r phone will be reboot into CMW recovery
9) now go to install zip/ install zip from ext sd/ find zip file/ & install its (use vol + & Vol - to navigate, power button to select )
10) reboot ur phone & Done, Now u have CMW 6.0.4.5 touch installed on ur device, u can check by rebooting ur device in recovery by
Goomanager
For latest recovery
http://forum.xda-developers.com/show....php?t=2733471
Now lets Flash Custom Roms on ur Device
Rom links:
http://forum.xda-developers.com/showthread.php?t=2712249
1) Download both files rom and gapps
2) Copy to ext sd
3) reboot into recovery ( goomanager method)
4) then select
wipe data/ factory reset then select yes wipe all user data, then go back
5) then select wipe cache partition, then select yes wipe, then go back
6) then select advance, select wipe dalvik cache, then yes wipe dalvik cache, go back
7) then select install zip choose zip from ext sd, select ur rom zip,then select yes install,
8) done, let the process complete, it will take some time, after installation complete, reboot ur phone,
9) after intial setup, reboot to recovery, this time dont wipe or factory reset anything, just install gapps zip, then reboot
10) Finally done donnna done done, u have custom rom on ur device, do whatever u want
Enjoy.....!!!!!!
Disclaimer: All material provided in this tutorial belongs to their origional owners, all credit goes them, like artas, dhiru, mateo1111,pedja, nx...etc, i m just explaining the process as per my experience,
Does P765 India V20C work with the method to unlock bootloader???
yupp, it works, i m also on same baseband
Sent from my LG-P760 using XDA Free mobile app
What sw you had before unlocking?
Droideking said:
yupp, it works, i m also on same baseband
Sent from my LG-P760 using XDA Free mobile app
Click to expand...
Click to collapse
Hi what sw version you had installed before trying to unlock bootloader? I have the same problem and I have V20i. Thanks
dr.David said:
Hi what sw version you had installed before trying to unlock bootloader? I have the same problem and I have V20i. Thanks
Click to expand...
Click to collapse
Sorry for late reply, I didnt install any new build, i was on stock jb build with V20c baseband, thats it,
n u need to be on latest stock jb build for unlocking bootloader,
above method works on almost any baseband
there are lots of different methods for unlocking bl for l9,
simple one is, (on device)
if u r rooted,
then install teminal emulater
open that
type "sudo"
hit enter
then type " adb reboot oem-unlock "
device will boot into bootloader mode,
press volume up, done
then follow rest of process, as above.......
I got this message
Droideking said:
Sorry for late reply, I didnt install any new build, i was on stock jb build with V20c baseband, thats it,
n u need to be on latest stock jb build for unlocking bootloader,
above method works on almost any baseband
there is lots of different methods for unlocing bl for l9,
simple one is, (on device)
if u r rooted,
then install teminal emulater
open that
type "sudo"
hit enter
then type " adb reboot oem-unlock "
device will boot into bootloader mode,
press volume up, done
then follow rest of process, as above.......
Click to expand...
Click to collapse
This is the message I got:
:/ $ sudo
/system/bin/sh: sudo: not found
127|[email protected]:/ $ su
[email protected]:/ # adb reboot oem-unlock
* daemon not running. starting it now on port 5038 *
* daemon started successfully *
error: device not found
and nothing happens !!!
dr.David said:
This is the message I got:
:/ $ sudo
/system/bin/sh: sudo: not found
127|[email protected]:/ $ su
[email protected]:/ # adb reboot oem-unlock
* daemon not running. starting it now on port 5038 *
* daemon started successfully *
error: device not found
and nothing happens !!!
Click to expand...
Click to collapse
sure u have rooted phone & super su & busybox installed
if yes then
again open terminal
type "su"
hit enter
accept su permission
then type
adb reboot oem-unlock
thats it
hope this time it will work.....
sorry for above post, sudo command can not use in this method
still no succes
dr.David said:
This is the message I got:
:/ $ sudo
/system/bin/sh: sudo: not found
127|[email protected]:/ $ su
[email protected]:/ # adb reboot oem-unlock
* daemon not running. starting it now on port 5038 *
* daemon started successfully *
error: device not found
and nothing happens !!!
Click to expand...
Click to collapse
It doesn't work !
Maybe my bootloader it's encrypted. Donno...If you have any other ideas...I am open to sugestions. Thank you !
dr.David said:
It doesn't work !
Maybe my bootloader it's encrypted. Donno...If you have any other ideas...I am open to sugestions. Thank you !
Click to expand...
Click to collapse
ok,
try last time
this time dont use adb
just
reboot oem-unlock
try this, if dont work, will try another method
which l9 varient u have?
variant
Droideking said:
ok,
try last time
this time dont use adb
just
reboot oem-unlock
try this, if dont work, will try another method
which l9 varient u have?
Click to expand...
Click to collapse
LG L9 P760 aug/2013
sw: V20i-eur-xx
hidden menu boot-loader state: lock
I tried your last suggestion, the phone turned of and nothing happened
Thanks for your help so far
Updated P765 -v20C(Indian Version) to CM11 -Kang by Dhiru
Hi All,
First of all Thank you Droideking for the detailed guide for a noob like me. :good::good:
I have updated my L9 p765 Indian version with baseband version 20c (latest JB Update India) to CM11. I have used the ROM - UnOfficial CyanogenMod 11 [KANG] 11 by dhiru1602. The experience is awesome. The GUI is liquid smooth no lags unlike the stock ROM.:victory:
About the guide I would like to confirm that it worked absolutely fine for my Indian Version p765 with v20c baseband. There were no restarts encountered in fastboot mode. Only thing which happened was that when i was running adb command in the command prompt i got the error on command prompt saying adb is outdated please update. The error was gone when i ran the command prompt with run as admin option in windows. Also i used RomManager instead of GooManager as it was not available on playstore.
One more observation - Droideking, in the guide you have mentioned that install gapps after installing ROM and restarting the phone after completing setup. I followed the same but then i realised that RomManager was done as i did a reset and wiped the cache and done a reset. So had to download the RomManager apk on the sdcard and install to boot into recovery to install the Gapps. So i guess its better to install the Gapps soon after you have installed the rom in the recovery before restart.
Here are some of the screenshots of my p765..
Error during installation
When I choose install update from ext sd card and after that there is a error occur
The error is shown in picture...
Please help...
and when i use my stock rom unfortunately the process com.android.phone has stopped. is occurred.
Niket Saini said:
When I choose install update from ext sd card and after that there is a error occur
The error is shown in picture...
Please help...
and when i use my stock rom unfortunately the process com.android.phone has stopped. is occurred.
Click to expand...
Click to collapse
God saves you buddy, this problem occurs due to wrong recovery, recovery stops itself from installing rom, n saves you from bricking device,
install latest recovery, 6.0.4.8 or twrp latest release, below is the link
recommend twrp
http://forum.xda-developers.com/showthread.php?t=2733471
dont install 2nd int
by the way if u r flashing artas cm 11 build its not going to work, go for nameless by dhiru or mokee open by nx
cheers
shirodkar8 said:
Hi All,
First of all Thank you Droideking for the detailed guide for a noob like me. :good::good:
I have updated my L9 p765 Indian version with baseband version 20c (latest JB Update India) to CM11. I have used the ROM - UnOfficial CyanogenMod 11 [KANG] 11 by dhiru1602. The experience is awesome. The GUI is liquid smooth no lags unlike the stock ROM.:victory:
About the guide I would like to confirm that it worked absolutely fine for my Indian Version p765 with v20c baseband. There were no restarts encountered in fastboot mode. Only thing which happened was that when i was running adb command in the command prompt i got the error on command prompt saying adb is outdated please update. The error was gone when i ran the command prompt with run as admin option in windows. Also i used RomManager instead of GooManager as it was not available on playstore.
One more observation - Droideking, in the guide you have mentioned that install gapps after installing ROM and restarting the phone after completing setup. I followed the same but then i realised that RomManager was done as i did a reset and wiped the cache and done a reset. So had to download the RomManager apk on the sdcard and install to boot into recovery to install the Gapps. So i guess its better to install the
Gapps soon after you have installed the rom in the recovery before restart.
Here are some of the screenshots of my p765..
Click to expand...
Click to collapse
Glad to hear that dis tut help u to get in custom rom world, the major reason behind it was just rooting n unlocking bootloader safely, rest procedures can varies person to person as per experience
Droideking said:
God saves you buddy, this problem occurs due to wrong recovery, recovery stops itself from installing rom, n saves you from bricking device,
install latest recovery, 6.0.4.8 or twrp latest release, below is the link
recommend twrp
http://forum.xda-developers.com/showthread.php?t=2733471
dont install 2nd int
by the way if u r flashing artas cm 11 build its not going to work, go for nameless by dhiru or mokee open by nx
cheers
Click to expand...
Click to collapse
Thank you for your reply.
And i solve it that day it is due to cwm recovery and atras rom need twrp recovery.
now i am using [AOSP]ParanoidAndroid4.42-FINAL.
Is nameless and mokee is better than paranoidandroid rom?
please give me suggestion
Niket Saini said:
Thank you for your reply.
And i solve it that day it is due to cwm recovery and atras rom need twrp recovery.
now i am using [AOSP]ParanoidAndroid4.42-FINAL.
Is nameless and mokee is better than paranoidandroid rom?
please give me suggestion
Click to expand...
Click to collapse
nameless, much stable, n support, i almost tried every rom on this forum and end up at this, grt rom...
Hotspot
Droideking said:
nameless, much stable, n support, i almost tried every rom on this forum and end up at this, grt rom...
Click to expand...
Click to collapse
Hey i want to know in nameless rom's hotspot is working properly and is there any problem regarding wifi Bluetooth or other fuctions...
please give me suggestion..
because in panandroid rom hotspot is not working
yupp, it works flawlessly
Sent from my LG-P765 using XDA Premium 4 mobile app
Hiw to move an app to sd
Droideking said:
yupp, it works flawlessly
Sent from my LG-P765 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hey, sorry to disturb u but i have an issue in nameless rom i know ur not a developer or senior member but i think u hv the solution of my problem.
My problem is I'm not able to move my apps from phone memory to sd card in nameless rom i used other apps to move but when i open the app and click on move it goes to apps info and there is no button to move to sd...
please help....
Hey guys,
Can you help me please? Can't find a way to unlock the bl for my frickin L9.
Device is already rooted.
P760 v20i-eur-xx
Thanks
Sent from my LG-P760 using XDA Free mobile app
Hi, i was using CM12.1, however I accepted an update and didn't figured out it was a CM13 Release, so when i dirty flashed the CM13 ROM over the CM 12.1 one, i got suspicious about something was wrong (due to the loading apps getting forever to configure)...the problem is that i tried then to patch gapps 6.0 and the recommended firmware to avoid problems but got many errors, then i tried to downgrade, however my TRWP just get stuck on the initial blue screen and just doesn't load, so i read what to do and did a downgrade using ToT back to Stock Verizone Firmware, and then tried to reinstall TWRP, i used ioroot to root my G3, then tried to reinstall TWRP but it always get an error, when the phone reboots to enter download mode it gets stuck in the LG Screen, and just stays there...i tried to enter TWRP like usual but the problem with the initial screen getting frozen is still there. I wanna get back to CM 12.1 but i have no idea how to make my TWRP work again
Hope you can help me out guys. Thanks
ezugaru said:
Hi, i was using CM12.1, however I accepted an update and didn't figured out it was a CM13 Release, so when i dirty flashed the CM13 ROM over the CM 12.1 one, i got suspicious about something was wrong (due to the loading apps getting forever to configure)...the problem is that i tried then to patch gapps 6.0 and the recommended firmware to avoid problems but got many errors, then i tried to downgrade, however my TRWP just get stuck on the initial blue screen and just doesn't load, so i read what to do and did a downgrade using ToT back to Stock Verizone Firmware, and then tried to reinstall TWRP, i used ioroot to root my G3, then tried to reinstall TWRP but it always get an error, when the phone reboots to enter download mode it gets stuck in the LG Screen, and just stays there...i tried to enter TWRP like usual but the problem with the initial screen getting frozen is still there. I wanna get back to CM 12.1 but i have no idea how to make my TWRP work again
Hope you can help me out guys. Thanks
Click to expand...
Click to collapse
I have the exact same problem, except I cannot downgrade at all. I get to the Download mode and nothing happens. The TWRP only gets to the initial TeamWin screen so I can't do anything through that route. I have no GAPPS and it really sucks. Any help would be appreciated
gypsydanger said:
I have the exact same problem, except I cannot downgrade at all. I get to the Download mode and nothing happens. The TWRP only gets to the initial TeamWin screen so I can't do anything through that route. I have no GAPPS and it really sucks. Any help would be appreciated
Click to expand...
Click to collapse
Hi, this is what i used to downgrade : http://forum.xda-developers.com/verizon-lg-g3/general/guide-flash-to-stock-10b-kdz-method-t2928140
Hope it helps, i'm at the office now, so when i get home I'll check where i got the resources to downgrade since i used my personal computer to do it.
Hey, i got it working now, i accessed the root files froma explorer in my G3, thn looked for the old recovery.img that were there and deleted them, then tried to reinstall it using adb, it shows 0+0 packages send to the phone, but it actually unblock the TWRP.
ezugaru said:
Hey, i got it working now, i accessed the root files froma explorer in my G3, thn looked for the old recovery.img that were there and deleted them, then tried to reinstall it using adb, it shows 0+0 packages send to the phone, but it actually unblock the TWRP.
Click to expand...
Click to collapse
what file explorer did you use and where was it located...I used es file explorer but cannot find that file
gypsydanger said:
what file explorer did you use and where was it located...I used es file explorer but cannot find that file
Click to expand...
Click to collapse
Try with Root Browser, then look for the Root / sdcard path and delete the recovery.img files, in my case there were 3 of them.
ezugaru said:
Try with Root Browser, then look for the Root / sdcard path and delete the recovery.img files, in my case there were 3 of them.
Click to expand...
Click to collapse
I don't have any of those .img files I tried following that guide as well and nothing happened it got to like 4% then said update failed due to an error. any ideas? I just need to get TWRP working again so I can do a clean flash, is there anyway I can reinstall TWRP it was originally installed through goomanager. tried updating there and it just reboots recovery to get stuck on the teamwin splash screen.
gypsydanger said:
I don't have any of those .img files I tried following that guide as well and nothing happened it got to like 4% then said update failed due to an error. any ideas? I just need to get TWRP working again so I can do a clean flash, is there anyway I can reinstall TWRP it was originally installed through goomanager. tried updating there and it just reboots recovery to get stuck on the teamwin splash screen.
Click to expand...
Click to collapse
I did it using the adb minimal tool, just placed the trwp 2.8.6.0 file into the root of sdcard folder, then using adb (phone must be connected to the laptop/pc in ethernet mode to be recognized) i ran
Code:
adb shell
command, after successfull initialize i used
Code:
su
(phone must be rooted to get a working su), and then i just ran the
Code:
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/recovery
command and the
Code:
dd if=/sdcard/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
command, during install it says 0+0 files sent, so i think it detects the trwp is already installed but still do something that fix the brick. Hope you can get it working.
ezugaru said:
I did it using the adb minimal tool, just placed the trwp 2.8.6.0 file into the root of sdcard folder, then using adb (phone must be connected to the laptop/pc in ethernet mode to be recognized) i ran
Code:
adb shell
command, after successfull initialize i used
Code:
su
(phone must be rooted to get a working su), and then i just ran the
Code:
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/recovery
command and the
Code:
dd if=/sdcard/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
command, during install it says 0+0 files sent, so i think it detects the trwp is already installed but still do something that fix the brick. Hope you can get it working.
Click to expand...
Click to collapse
when I run
Code:
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/recovery
I get permission denied
any thoughts on that? I still cannot figure this out ugh so much has changed since I have rooted my last phone
gypsydanger said:
when I run
Code:
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/recovery
I get permission denied
any thoughts on that? I still cannot figure this out ugh so much has changed since I have rooted my last phone
Click to expand...
Click to collapse
Did you give terminal root permissions by issuing the SU command and then granting the permissions on the phone?
[VK810.4G] [altev] [ViKtory810ROM] official LG G Pad 8.3 Lollipop 36B_00 5.0.2
[VK810.4G] [altev] official LG G Pad 8.3 Lollipop 36B_00 5.0.2 DEBLOAT SCRIPTS and copies of all the files they remove
[VK810.4G] [altev] OTAs, .IMGs and KDZs, oh my
I don't recall it asking me after entering the su command...it has asked me on the phone at some point tho, anyway to reset that? Ill be trying again on my lunch break. Thanks for the help so far ill keep updating my status.
gypsydanger said:
I don't recall it asking me after entering the su command...it has asked me on the phone at some point tho, anyway to reset that? Ill be trying again on my lunch break. Thanks for the help so far ill keep updating my status.
Click to expand...
Click to collapse
If you're using SuperSU, launch the app and look at the list of apps with both permanantly granted or denied superuser permissions. You can click on an app there to change it. Are you using a local Terminal emulator app? If so, that's what would request SU access when you enter the command, but if you've done SU in Terminal on this ROM installation before and you granted permanent SU permissions for it, it would give it again automatically when you enter the SU command.
If you're using ADB via USB from a PC, and you authorized USB Debugging on the phone prompt when you connected from the PC, and you then enter the SU command through the PC, I'm not sure what app shows up in the SuperSU app.
You're welcome, good luck!
---------- Post added at 08:39 AM ---------- Previous post was at 08:36 AM ----------
gypsydanger said:
I have the exact same problem, except I cannot downgrade at all. I get to the Download mode and nothing happens. The TWRP only gets to the initial TeamWin screen so I can't do anything through that route. I have no GAPPS and it really sucks. Any help would be appreciated
Click to expand...
Click to collapse
By the way, when using Download mode, what tool are you using with it? LG Flash Tool 2014? Did you previously install the Verizon specific LG drivers, reboot the PC, then connect the phone to the PC in Download mode to a USB 2.0 port with the original cable? Check in Device Manager to see if your phone is listed under Modems when your phone is in Download mode? It can take up to 5-10 minutes for the PC to load the driver you previously installed, each time you connect the phone to a different USB 2.0 port.
Sorry if any of this is repeating anything that's already been asked or suggested.
If you can get it to, I'd suggest flashing the 10B KDZ for the easiest to root with the Stump app in brute force mode, and put TWRP on with TWRP Manager.
roirraW "edor" ehT said:
If you're using SuperSU, launch the app and look at the list of apps with both permanantly granted or denied superuser permissions. You can click on an app there to change it. Are you using a local Terminal emulator app? If so, that's what would request SU access when you enter the command, but if you've done SU in Terminal on this ROM installation before and you granted permanent SU permissions for it, it would give it again automatically when you enter the SU command.
If you're using ADB via USB from a PC, and you authorized USB Debugging on the phone prompt when you connected from the PC, and you then enter the SU command through the PC, I'm not sure what app shows up in the SuperSU app.
You're welcome, good luck!
---------- Post added at 08:39 AM ---------- Previous post was at 08:36 AM ----------
By the way, when using Download mode, what tool are you using with it? LG Flash Tool 2014? Did you previously install the Verizon specific LG drivers, reboot the PC, then connect the phone to the PC in Download mode to a USB 2.0 port with the original cable? Check in Device Manager to see if your phone is listed under Modems when your phone is in Download mode? It can take up to 5-10 minutes for the PC to load the driver you previously installed, each time you connect the phone to a different USB 2.0 port.
Sorry if any of this is repeating anything that's already been asked or suggested.
If you can get it to, I'd suggest flashing the 10B KDZ for the easiest to root with the Stump app in brute force mode, and put TWRP on with TWRP Manager.
Click to expand...
Click to collapse
ok so I figured out the permission denied...somehow my root access in dev options got to off I changed it to adb and got this one to work
Code:
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/recovery
but this one says /sdcard not found...I created the folder and it still says not found.
Code:
dd if=/sdcard/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
where exactly does the recovery.img need to be located.
I am using LG Flash Tool 2014 and I have installed the specific drivers from lg and I can see my phone correctly in Device Manager. I just keep getting it stopped due to an error, but if I can get recovery working then I should be able to flash a stable CM for now.
gypsydanger said:
ok so I figured out the permission denied...somehow my root access in dev options got to off I changed it to adb and got this one to work
Code:
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/recovery
but this one says /sdcard not found...I created the folder and it still says not found.
Code:
dd if=/sdcard/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
where exactly does the recovery.img need to be located.
I am using LG Flash Tool 2014 and I have installed the specific drivers from lg and I can see my phone correctly in Device Manager. I just keep getting it stopped due to an error, but if I can get recovery working then I should be able to flash a stable CM for now.
Click to expand...
Click to collapse
the file goes in the root of storage, not in a folder, as shown in th pic.
if it says sdcard not found, you either entered the command wrong, or there is something wrong with your file system.
fyi, because the first command worked, you literally have no recovery now. thats what it does, empty the partition.
bweN diorD said:
the file goes in the root of storage, not in a folder, as shown in th pic.
if it says sdcard not found, you either entered the command wrong, or there is something wrong with your file system.
fyi, because the first command worked, you literally have no recovery now. thats what it does, empty the partition.
Click to expand...
Click to collapse
ok yes I have no recovery, that is correct...I put the recovery.img in /root and run the 2nd command again and it still says dd: /sdcard/recovery.img: No such file or directory
when I open up ES File Explorer it opens by default to /sdcard and immediately says /sdcard/ not found...if my file directory is messed up how do I go about getting it corrected?
edit: I used flashify and got TWRP back on successfully but it still won't go past teamwin splash screen....am I missing something I'm on cm 13.020151124-nightly-vs985.
is there a specific version of twrp I need for that nightly?
gypsydanger said:
ok yes I have no recovery, that is correct...I put the recovery.img in /root and run the 2nd command again and it still says dd: /sdcard/recovery.img: No such file or directory
when I open up ES File Explorer it opens by default to /sdcard and immediately says /sdcard/ not found...if my file directory is messed up how do I go about getting it corrected?
edit: I used flashify and got TWRP back on successfully but it still won't go past teamwin splash screen....am I missing something I'm on cm 13.020151124-nightly-vs985.
I'm attempting to wipe recovery again and try CWM to see if that will work.
Click to expand...
Click to collapse
unfortunately, i dont know how to fix it.
im betting stock wont flash because of whatever is damaged on your internal card.
i just looked back and noticed this all started with cm13. i have to wonder, how many phones are they going to break before they pull this update until a fix is found.
your is the first that i have come across that broke the internal card, but i have seen quite a few that broke the external.
im not suggesting you try this, as i really dont know what will happen.
as a last resort, you could try to zero out the data partition with dd code.
given the unknown damage to your card, i cant stress enough, this is a last resort, and may brick your phone.
normally, it should react like a factory reset, but if its still unable to use the internal properly afterwards, it very possibly may not boot fully or at all any more.
edit, as far as i know, the newest version is what they are using, but i dont know what that is specifically.
bweN diorD said:
unfortunately, i dont know how to fix it.
im betting stock wont flash because of whatever is damaged on your internal card.
i just looked back and noticed this all started with cm13. i have to wonder, how many phones are they going to break before they pull this update until a fix is found.
your is the first that i have come across that broke the internal card, but i have seen quite a few that broke the external.
im not suggesting you try this, as i really dont know what will happen.
as a last resort, you could try to zero out the data partition with dd code.
given the unknown damage to your card, i cant stress enough, this is a last resort, and may brick your phone.
normally, it should react like a factory reset, but if its still unable to use the internal properly afterwards, it very possibly may not boot fully or at all any more.
edit, as far as i know, the newest version is what they are using, but i dont know what that is specifically.
Click to expand...
Click to collapse
yea that scares me...now that I have made a little progress I'll try reverting to stock again the two ways I have found. I'll keep updating my progress.
gypsydanger said:
yea that scares me...now that I have made a little progress I'll try reverting to stock again the two ways I have found. I'll keep updating my progress.
Click to expand...
Click to collapse
so I have recovery back on my phone but it won't go past splash screen, I can remove recovery to where I have no recovery at all, everytime I put recovery back on from an app like Flashify it is successful but I can't get past the Splash screen of twrp...if i can get twrp or any other recovery on my phone i should be fine that is what is hanging me up...is there another recovery I can use with CM13 other than TWRP so I can try that and if so how do I get it onto my phone, I can't seem to get fastboot to work so help on that might be useful.
when I try the kdz method to revert to stock it fails due to an error...when I try the dll version to revert to stock it sits on waiting for connection, if I unplug the phone it errors out
gypsydanger said:
so I have recovery back on my phone but it won't go past splash screen, I can remove recovery to where I have no recovery at all, everytime I put recovery back on from an app like Flashify it is successful but I can't get past the Splash screen of twrp...if i can get twrp or any other recovery on my phone i should be fine that is what is hanging me up...is there another recovery I can use with CM13 other than TWRP so I can try that and if so how do I get it onto my phone, I can't seem to get fastboot to work so help on that might be useful.
when I try the kdz method to revert to stock it fails due to an error...when I try the dll version to revert to stock it sits on waiting for connection, if I unplug the phone it errors out
Click to expand...
Click to collapse
What error when flashing the KDZ? Most errors in LG Flash Tool 2014 should be totally ignored, just drag the dialog out of your way and don't press any buttons.
roirraW "edor" ehT said:
What error when flashing the KDZ? Most errors in LG Flash Tool 2014 should be totally ignored, just drag the dialog out of your way and don't press any buttons.
Click to expand...
Click to collapse
it says update failed due to an error and you have to hit retry or it does nothing...unless I need to just do nothing.
edit: IT WORKS YAY...all I did was retry and retry (definition of insanity) and the /sdcard just appeared then the dd command worked and I'm in recovery now yayayayayay
edit: edit: I did take out my eternal SD card so I am going to guess and say that that was the problem from the get go...anybody have any thoughts on that??
every rom i try to install suddenly give me error 7 even tho i used to install them like linageos and miracledroid
when i connected the device through twrp's adb sideload and put the command adb devices -l it gave me the lines
"List of devices attached
* daemon not running; starting now at tcp:5037
* daemon started successfully
2ea5e04b0504 sideload productmni_mido model:Redmi_Note_4 device:mido transport_id:1"
the the product supposed to be omni_mido and not mido?
and if so how can i change it?
Update TWRP: https://androidfilehost.com/?fid=890278863836285248
k3lcior said:
Update TWRP: https://androidfilehost.com/?fid=890278863836285248
Click to expand...
Click to collapse
tried that already... is there another solution?
Elad Huttner said:
tried that already... is there another solution?
Click to expand...
Click to collapse
Wipe System/Data/Dalvik/Cache before flashing ROM, if you still have error it means you have old TWRP.