Hi, im using foliomod 1.4 and sometimes my tablet jst freeze up and i cant do anything. Just remove baterry and give it back, its kinda F***ed up, and its making absolutely non-usable, do you havy any tips or solution on this ?...
Try to press Power for about 5 secs, works most of the time to switch it off without opening the device.
yeah i also got this problem sometimes
but mostly it happens right after started up
your right that's kinda fxxxed up
you may try another version such as TNT 1.0 or Notion 2.0
When I want to shut off my folio, I press the ON button and I slide my finger up and down the soft buttons many times very fast . It works
Related
It says only ipl 2.25.0001 and spl 2.25.0001
I try a hard reset, but when it asks me to confirm by pressing SEND, I press SEND and nothing happens.. press any key and nothing happens, just sits there saying press SEND to confirm...
I tried flashing Cingular/AT&T's rom on to it, it was successful on the screen, but after rebooting, just went back into the 3 color screen...
Does anyone have any suggestions?
Additional info
I just wanted to add, I have searched threads here on xda-dev and other sites, and have found similar issues - normally the other issues have been resolved in one way or another involving a hard reset, which my phone will not complete. When it asks me to press send, the phone freezes at that point and does not accept any key entries (except reset). I would really appreciate any input. I also have a theory-that I may attempt this evening-If you hold the camera button down and reset, it brings up the boot loader screen (if my information is correct)... could my problem be caused by a faulty camera button? Maybe internally the button is remaining closed, which could prevent it from doing anything on a reset outside of the boot screen? Any engineers around that may know this? I am going to attempt (hopefully with low heat) to remove the button this evening... possibly even repair or replace it if the phone works with the button removed...(these thoughts are based on my phone being dropped in the sand at the beach...maybe a grain of sand worked it's way into the camera's button housing and is holding the contact closed)
problem's almost fixed
well thanks for no advice... i desoldered and removed the camera button (button 3). powered it on and the phone works. I reprogrammed the camera to button 5. (i also loaded a new WM6 rom and some other stuff) The last time I opened up the phone, I broke the itsy bitsy super micro tiny lock on the keyboard ribbon cable socket... so now my slide out keyboard doesn't work. I installed a full screen keyboard and set it to the messaging button (button 1) - the messaging button still brings up messaging with just a touch, but a long hold brings up a full screen touch keyboard that works fantastically!!! I am going to dismantle the very tiny micro switch and repair it, then resolder it back on the mainboard to make my camera work like it should again...and find a way to get the keyboard ribbon cable to lock into the socket...then my phone will be as good as new!
umm... thanks???
well congratulations on getting it working again.
tiny switch
I have taken the tiny little switch apart without breaking anything... one tiny grain of sand stuck under the button pressing on the switch plate... now i have to find a way to put the little switch back together... then attempt to solder it back onto the board without over heating nearby components. I have been playing around with Byka's cube... took a bit of tweaking to get it to work well.... not sure if I want to keep it or not... I have been trying to find htc cube, but no luck outside of a rom... which I may consider...but I just spent the past week reinstalling all of the software I use... Would like to just design my own windows for my phone if I had the time... Been working on an ion motor for an electric car...
I would like to thank everyone here at xda-dev. for all the information. Could not have learned so much, so quickly, if it weren't for this site.
oh... and I am using an 8125 (G4) with Faria Crossbow
Have the same problem...
Hi!
I have the same problem (but I don't have much tech know how).
It all started when phone got wet (inc. in battery compartment).
My phone would not soft reset beyond the Bootloader, unless I leave the battery out for a few hours. Then once it loads up, after a short amount of usage 2 things happen: 1) every time I would turn it on (or get a call) it starts in Camera (you didn't report it but you must have had the same experience). 2) the buttons don't work properly.
It finally dawned on me the camera button might be stuck, I set the button to "none", and no more more automatic camera. I still need to free the button altogether as still causing button freezeup and also allow soft resets.
I don't know much about soldering.
Any ideas?
Thanks
hope anyone knows the answer!!
my phone (TMOUSA) is not unlocking after it goes on standby.
i had try 3 different ROMs and it still doing the same, task 29 on every flash,
one of them the 3.14 TMOUS stock ROM tried 2.15 and 2.14 radios and nothing
if i do a soft reset it will boot up ok and i can play with the phone an do calls and all but when it goes on standby and and try to unlock (seeing the actual unlock screen and slider) it do nothing, like the screen isn't working or unresponsive to touch
*battery pins ok
*powered phone without sim and without storage card but still doing the same thing
any ideas???
The same problem .. over and over with no solution :
http://forum.xda-developers.com/showthread.php?t=830562&highlight=Screen+Unresponsive
And
http://forum.xda-developers.com/showthread.php?t=822777&highlight=Screen+Unresponsive
kawazaki said:
The same problem .. over and over with no solution :
http://forum.xda-developers.com/showthread.php?t=830562&highlight=Screen+Unresponsive
And
http://forum.xda-developers.com/showthread.php?t=822777&highlight=Screen+Unresponsive
Click to expand...
Click to collapse
the firs link is the only one with the same problems im having, touch screen works but not after it goes on standby or if the phone go on standby by it self and i press any other bottom (not the end bottom) it will still works
everyone thinks is a hardware thing but how is the touch screen actually working for me? not like second link where the touch don't work at all
mine works but if i press the end key to make it go standby and press it again it become unresponsive, but if it goes to stand by by itself and i press any other key it will still works
well.... i guess we'll never know
probably my hd2 will go to the broken i might use it to fix any other thing drawer
Aaah.. FML
I just woke up, and ive got the same problem...
Can some1 help me where i can find the stock rom for vodaphone??
im gonna bring it back
hey everybody, i hope someone can help me, the thing is that my girlfriend have this phone right, and it came with android 2.0, i updated the phone to android 2.1 official and everything was normal, until a few days that it start to have problem with the touch screen. the problem is that sometimes she just put her finger close to the screen, she doesn't even touch it and the phone goes crazy and start to select things without touching the screen :S, another problem similar to that one, its that sometimes the screen freeze or something, you try to move betwen screens but it doesn't move propertly :S and an example is if you try to reset the phone (she have root and xrecovery) using the option that appears on the menu when press the power botton, you can press it, it doesn't do anything :S..so i change the rom for minicm7 (the last one that came out thins week) and apparently that problems is gone, the phone works fine, until today (i change it the rom yesterday) that the problem i mention before start to show up again :S, the only difference is that it doesn't happens so sudden as before, but we still want to know why than happens and how to fix it..please someone!
P.S: sorry for the speech xD
this is dev thread plz move it to q/a
Hi there to everyone, I broke only the glass on my screen couple of weeks ago (it felt face down from about half a meter, thats stupid) and I change only the glass my self but since then i have a problem with the screen like: if I press a bit harder anywhere on the screen for about 2 sec the screen became irresponsible and also the back and menu buttons, home and power button work normal. If I press the home button it react as it should, it goes to home screen, so it's just the screen frozen on touch and I have to lock and unlock the phone to go to normal. On daily use it's not such a big problem as i don't press the screen too hard, the problem mostly occurs when playing games.
I would try a hard reset but I not rooted as I use some apps that don't work if I'm rooted and I can't save all my settings, saves and apps and personally I hate to reinstall everything back again.
I'm thinking this is a hardware problem but why it goes to normal only after lock/unlock procedure and i also find on a forum that this can be from the screen protector. It's something similar with the phone in this video the difference being that mine it freezing and that it moving by itself. youtube.com/watch?v=isBDKgxB5vs
Did anyone also experience this?
PS. I sorry for my english as it's not my own language but I'm trying to make my self clear as best as i can, Thank you
My Home Button sometimes works sometimes doesnt .I have tried switching roms between 4.3/4.4 and 4.1.2 stock ones. For now i am using LMT launcher, but it might take me sometime to get a hang of it ! .
I have heard getting to the home button is problematic and is somehow related to the touchscreen/display.
Can someone please guide me how to go about it.
It works sometimes like say after seven presses. sometimes it just works like normal. Its cold here in new delhi. Maybe thats what got to my phone.
Search for the service manuals, there's a run through with pics.