Related
If your phone was bricked in any way, but still shows something on the screen when powered on or plugged in, try this.
1. Take out battery, put it back in. (to turn the phone fully off)
2. Don't turn it the phone on!
3. Plug the phone into your PC, do not hit the power button!
4. See if the phone shows anything on the screen
IF the phone screen does show the battery charger or something else on the screen after being plugged in without you hitting the power button, so far so good.
5. Now while it's on like this, hold the volume up and volume down buttons.
6. Hold the power button as well as the volume buttons until the screen goes black.
7. As soon as the screen goes black, let go of the power button! But DON'T let go of the volume buttons!
When done properly, this will always get you into Download mode. After that you should be able to use Odin to revert to stock, tar and instructions here:
http://forum.xda-developers.com/showthread.php?t=734475
This fixed my 'odd' bricks. Over and over again.
I'd say it's impossible to truly brick this phone.
I have been researching this most of the day, due to some testing I was doing, and the one thing I have come to realize is that this phone recovers well from "brick" it's not a true brick it's just scary. One of the posts I read, here on xda, said that unless the blue progress bar started advancing while using Odin, you can unplug, pull battery fairly safely.
davbran said:
I have been researching this most of the day, due to some testing I was doing, and the one thing I have come to realize is that this phone recovers well from "brick" it's not a true brick it's just scary. One of the posts I read, here on xda, said that unless the blue progress bar started advancing while using Odin, you can unplug, pull battery fairly safely.
Click to expand...
Click to collapse
Haha well that's exactly what happened to me. I flashed wrong with Odin and it failed halfway through, and I had no choice but to reboot the phone.
And when I did I got a truly odd screen. All I could see was a picture of a phone connected to an exclamation point connected to a laptop. That's it. Lol.
And I fixed it by doing this.
omg, i love you This totally fixed my problem XD
Everyone kept saying go to download mode, but no one ever said to "7. As soon as the screen goes black, let go of the power button! But DON'T let go of the volume buttons!"
super life saver... thanks alot
I actually did find someone else say to do that but it was out of luck as it was deeply buried. Don't remember where it was here lol
Its nice to have people who help us newbies
andershizzle said:
Haha well that's exactly what happened to me. I flashed wrong with Odin and it failed halfway through, and I had no choice but to reboot the phone.
And when I did I got a truly odd screen. All I could see was a picture of a phone connected to an exclamation point connected to a laptop. That's it. Lol.
And I fixed it by doing this.
Click to expand...
Click to collapse
Yea, last night I was messing around with the latest lag fix, but it ending up causing a lot of FC's, so I had to revert to stock a few times. I tried to make it work using ext2 and ext3, but it still wasn't stable enough. I didn't enjoy the noticeable speed increase, but it wasn't worth it since launcher pro was one of the programs that was FCing.
Anyways, so after I gave up for the 3rd time, I flashed stock using ODIN and it got stuck. I left it there for awhile with no progress and the phone's screen actually just went completely black. I pulled the battery and got the weird cell phone pointing to computer icon. I almost crapped my pants at that point. Very scary moment since I had not seen that screen before.
A quick google search for "bricked Vibrant" led me to this thread and voila! My Vibrant is alive and well again.
Thanks a bunch.
PS: After reflashing stock that many times, I still find it strange that after a fresh flash, I still get a noticeable speed boost by wiping the phone through the privacy setting. Not sure if it's a placebo effect, but I swear it makes a noticeable difference every time.
Maverick777 said:
Yea, last night I was messing around with the latest lag fix, but it ending up causing a lot of FC's, so I had to revert to stock a few times. I tried to make it work using ext2 and ext3, but it still wasn't stable enough. I didn't enjoy the noticeable speed increase, but it wasn't worth it since launcher pro was one of the programs that was FCing.
Anyways, so after I gave up for the 3rd time, I flashed stock using ODIN and it got stuck. I left it there for awhile with no progress and the phone's screen actually just went completely black. I pulled the battery and got the weird cell phone pointing to computer icon. I almost crapped my pants at that point. Very scary moment since I had not seen that screen before.
A quick google search for "bricked Vibrant" led me to this thread and voila! My Vibrant is alive and well again.
Thanks a bunch.
PS: After reflashing stock that many times, I still find it strange that after a fresh flash, I still get a noticeable speed boost by wiping the phone through the privacy setting. Not sure if it's a placebo effect, but I swear it makes a noticeable difference every time.
Click to expand...
Click to collapse
Glad I could help!
And that's intersting. I'll make sure to wipe the privacy settings. I actually haven't ever wiped them yet.
No go for me.
I used the stupid partition tool in rom manager. partitioned the internal memory not the sd card.
Saw a few others did this, and this worked for them, either right away or after flashing eugene's froyo rom then reverting back, but that rom just hangs on cache.fsd or something like that.
Trying to repartition through odin, with no download files selected right now. It does not appear to be doing anything, just set pit file, then do not turn off target in odin.
Will leave it for a bit, maybe try to flash this again, i think the issue might be deeper for me though. need kernel and everything else.
I did that but my phone locked up and now all I get is a picture of a yellow cation sign next to a little phone and pc pic.. anything I can do at this point or??
tried going into recovery and download mode but it wont let me past that screen.
Thank you so much for this, I received a replacement set 2 days ago and was playing around the the phone and I bricked it, it thought it was frozen so I pulled the batter and it bricked.
I followed your instructions and it works like a charm. What I did find though is that i can't seem you use odin on a mac even with a virtual machine. I had to use an actual PC.
tweezit said:
I did that but my phone locked up and now all I get is a picture of a yellow cation sign next to a little phone and pc pic.. anything I can do at this point or??
tried going into recovery and download mode but it wont let me past that screen.
Click to expand...
Click to collapse
This is exactly the screen I had. Follow my instructions exactly and you'll get into download mode (at least i did)
This should be made a sticky.
thank you thank you thank you
Sticky this thread.
Sent from my SGH-T959 using XDA App
Great find for all.
has anyone found a way to unbrick a flashed EU rom then the person flashed to US rom? and then the power wont come on? But the unit does get hot when plugged in?
Im trying to see if i need to jtag this thing. or if anyone had success?
Thanks
ok so my vibrant gave me the cell phone and computer screen i got it back in download mode. started odin to get it back to stock but no matter how long i let odin go nothing happens i got the files that i need for odin out of a thread on these forums and i have followed the directions to the letter and still nothing. any help some one can give would be great. thank you for your time.
How do I know if my phone is being picked up by Odin or being flashed?
did the same thing the clockwork partition wiped my internal memory
F**k!
woop guess im going to tmobile in the a.m. and playin the whole
idk what happened it wont turn on
thank god for the 14 day return policy!
I ran into "brick mode" myself 2 nights ago and could not get my phone into download mode. Any possible combo of volume key up/down and power had no effect. Just that phone exclamation point pc icon slowly blinking in the center of the screen. I did finally get it into download mode but it wasn't using any of the previously mentioned methods, so I'll add one more to the growing list to try. This one worked for me after almost 4 hours of experimenting.
BTW....my phone would never display the battery charging image when powered off and plugged in. Just this same annoying image.
Pull the battery. Put it back in. Hold the just the volume down button. Do not hold the power button. Plug in either a wall charger or USB cable. The cable will power up the phone and voila. I was in the download screen.
I also highly recommend the stock ROM from the thread
"[ROM] OFFICIAL T-Mo Vibrant JFD ODIN/Nandroid Backup Images 7/29/10 (Tested/Working)" In Vibrant > Vibrant Android Development
I tried another ROM found out on the internet and ended up with a shell that crashed and restarted every 60 seconds.
For those running into Odin stuck on a message about verifying the file system, I had no luck when the phone used COM3. I suggest moving your USB cable into different ports on your PC. Each new port will "install" a new instance of the phone using different COM ports. COM5 and COM6 both worked as I was reflashing the day away yesterday.
I tried to upgrade to froyo using the odin method from this thread http://forum.xda-developers.com/showthread.php?t=853950. After everything was successfully done my phone shut off and now it won't turn on. I don't get a battery charge screen or anything. The phone's just blank.....
First, Get the Shipping rom (pit and tar files) so you can ODIN back to stock
Be sure you have the newest version of ODIN
Then remove the battery, plug the USB to the PC.
Now put the battery back.
Press both vol keys (up and down) and hold.
That should get you in Download Mode.
If it does not work, take battery out, unmplug USB.
Put battery back and try again to go into download mode.
Now you put the wrong version of froyo, if your keys maps are changed you may be screwed
If so, good luck! You are gonna need a lot of research to see if you can save it
i think i'm screwed.....nothing is working
If anyone else could help me with this, it would be great. I'm in between a rock and a wall right now with my phone.
you flashed the wrong rom. You didn't know that, did you?
iynfynity said:
you flashed the wrong rom. You didn't know that, did you?
Click to expand...
Click to collapse
No I didn't know that sadly. Is there anyway I can save my phone?
Hehehehe...I bricked mine yesterday. I disabled voodoo via Voodoo Toggle and waited for Linda to convert. I loaded up Odin and put in my pit & tar for JFD, which I always use, and hit start. I was on Nero v3 going to flash Nero v4 when it came out. I got a Fail part of the way through. The phone won't power on at all.....A popup says Windows can't recognize the device plugged into usb...
I think people are confusing things here and there...if your phone won't power on at all, you can't get help...you can't get into download mode to odin or recover it.
Like mine, for instance, there is no amount of times taking the battery out or doing this or that is gonna fix it..We need to read the post before we try to offer help...IF IT WON'T POWER ON how can people post ways to ODIN or RECOVER...
I'm just sayin....
jmcghee1973 said:
Hehehehe...I bricked mine yesterday. I disabled voodoo via Voodoo Toggle and waited for Linda to convert. I loaded up Odin and put in my pit & tar for JFD, which I always use, and hit start. I was on Nero v3 going to flash Nero v4 when it came out. I got a Fail part of the way through. The phone won't power on at all.....A popup says Windows can't recognize the device plugged into usb...
I think people are confusing things here and there...if your phone won't power on at all, you can't get help...you can't get into download mode to odin or recover it.
Like mine, for instance, there is no amount of times taking the battery out or doing this or that is gonna fix it..We need to read the post before we try to offer help...IF IT WON'T POWER ON how can people post ways to ODIN or RECOVER...
I'm just sayin....
Click to expand...
Click to collapse
Well right now I'm simply trying to get the phone to turn on which it won't, I was not asking for help to odin or recover. I was trying to ask if anyone else had this problem and if my phone is totally killed or if there's a possibility that i can save it. But thanks for your 2 cents.
Me too
I had ordered Samsung Vibrant Unlocked from T-Mobile USA around a month back. I am well past the 30 day replacement now.
I Rooted it updated to Axura 2.2.5.9
After all the procedure got completed, I rebooted the phone and now it just won't start at all.
My piece is Hardware Locked wherein I can't get into the Recovery Mode, but can get into the Download Mode. But I am not even able to get into the Download mode now.
It just won't freaking turn on.
If I send it over for repair, as the phone is a rooted one, will I void the warranty ?
Please reply quickly. I am starting to freak out.
OK... I want to be the first to eat my words here!!!!!
I tried one last time...just now
I took everything out and only held the volume keys. I plugged in the USB cable to the PC and then to the phone & put the battery in and BAM!!!!! it came on in Download mode
This way has NEVER worked for me without holding the power button. This phone was in all senses of the word "DEAD". I figured I would give it a try with just the volume keys.
jmcghee1973 said:
OK... I want to be the first to eat my words here!!!!!
I tried one last time...just now
I took everything out and only held the volume keys. I plugged in the USB cable to the PC and then to the phone & put the battery in and BAM!!!!! it came on in Download mode
This way has NEVER worked for me without holding the power button. This phone was in all senses of the word "DEAD". I figured I would give it a try with just the volume keys.
Click to expand...
Click to collapse
lol you must be very happy after that, good to great that.
Sent from my SGH-T959 using XDA App
jmcghee1973 said:
OK... I want to be the first to eat my words here!!!!!
I tried one last time...just now
I took everything out and only held the volume keys. I plugged in the USB cable to the PC and then to the phone & put the battery in and BAM!!!!! it came on in Download mode
This way has NEVER worked for me without holding the power button. This phone was in all senses of the word "DEAD". I figured I would give it a try with just the volume keys.
Click to expand...
Click to collapse
I got the same issue and this isn't working for me.
are there any other ideas?
it is completely dead. I am using a new battery and a known good usb cable to the computer.
I have tried holding all three buttons...just the vol up and down...vol up and power...etc... and nothing.
I even created that little JTAG thingy that I found on YouTube...that did nothing also
Different Situation
I have a similar problem with my Vibrant.
I reset my battery stats and also disabled VooDoo lagfix, and after i tried to reboot the phone, it froze on the vibrant screen.
I tried using soome of the methods that you guys posted before me, but then after i turn it on it shows an icon that there is a connection problem between the phone and PC.
I CAN turn on the phone, is there a way to just like reset everything? and if so how?
Thanks!
IClassStriker said:
I have a similar problem with my Vibrant.
I reset my battery stats and also disabled VooDoo lagfix, and after i tried to reboot the phone, it froze on the vibrant screen.
I tried using soome of the methods that you guys posted before me, but then after i turn it on it shows an icon that there is a connection problem between the phone and PC.
I CAN turn on the phone, is there a way to just like reset everything? and if so how?
Thanks!
Click to expand...
Click to collapse
If your phone powers on at all, you should be able to get into DL mode. Follow the instructions on how to revert to stock via ODIN.
In reply to the OP, if you tried the download mode method:
connect phone to usb
pull out battery
hold both volume sticks
put in batttery
and the phone still does not turn on even after multiple tries , well you're a bit screwed. But, Samsung cannot detect if the phone has been rooted if it cannot even turn on. Just tell them the Kies Mini update bricked the phone.
omg leave ur phone on charger for 10 min, pull battery out when hooked up to charger put battery back in , let sit for few min pull battery out hook up phone to computer hold vol up vol down pop battery in , helped ? np this has been answered gazilion times in other threads
btw it takes few try this way to get it back up running so dont stop on first , hey .
If you have the phone!pc problem..connect to odin & see if your showing a COM port .... just flash pit & tar if you do. Without download mode
Sent from Bionix V powered Vibrant
my phone shut off and now it won't turn on. I don't get a battery charge screen or anything. The phone's just blank.....
If you have the phone!pc problem..connect to odin & see if your showing a COM port .... just flash pit & tar if you do. Without download mode
yes u do that it makes sense lol
gmoney007 said:
I got the same issue and this isn't working for me.
are there any other ideas?
it is completely dead. I am using a new battery and a known good usb cable to the computer.
I have tried holding all three buttons...just the vol up and down...vol up and power...etc... and nothing.
I even created that little JTAG thingy that I found on YouTube...that did nothing also
Click to expand...
Click to collapse
You're talking about a DIY Jig. A JTAG is completely different. They cost $150-300. You can pay to have a local repair shop jtag it for around $50 or send it to Samsung to repair/replace. I'm still trying to find out how much Samsung would charge for the repair if it's deemed out of warranty.
If your phone refuses to turn on no matter what you do and it gets warm or hot if you leave the battery in it, read on:
I hope my suggestion is not too late. I was in the situation before. I tried everything everyone said here and somewhere else. None of them works.
The reason that those methods don't work because you cannot get to download or recovery mode or even the pc-phone screen since your phone won't turn on. The reason that your phone doesn't turn on because the bootloader has been messed up. A jig will work only if your phone can be turned on somehow.
Three possible solutions:
1. Repair or replace it with T-mobile, or
2. Get someone to repair it with a riff box or other similar tool, or
3. Get the box and fix it yourself (not recommended if you are not familiar with electronic stuff.)
This is the link for the same problem you have; this guy bought the box and has his phone fixed himself. If you live in US, he may do it for you if you have no place to go. It does hurt to ask.
http://forum.xda-developers.com/showthread.php?t=974862&page=6
Hi all, i am running the latest version of Bionix i went to hit the reboot option and accidentally selected the download mode button. I pulled the battery out before it fully shutdown, me being impatient. When i put the battery back in the phone immodestly turned on and tried to boot, and stays on the vibrant screen for about 2-3 seconds then shuts off and try's to boot back up again on its own. Also when plugged in it continues to boot loop, it never shows that it is charging, only the battery with the loading circle, then ****s off and repeats.
I am not new to modding, and i am not new to getting my phone into recovery or download mode. The problem is the phone does not respond to the hardware keys, and i am positive that it used to be able to reach download mode via keys, i do not have a hardware locked vibrant.
I guess my question lies in the realm of another way to reset the phone, maybe via shorting pins or something? Does anyone know of an alternate method that does not rely on keys or software to reset the phone?
Thanks in advanced!
A jig
Sent from my SGH-T959 using XDA App
I have been in similar circumstance. Have you tried the battery methods to get into dl mode?
Remove battery and connection to computer.
plug phone back into computer
Hold volume up and down
Insert battery while holding buttons
That should work because it will put you in dl mode before it has a chance to boot loop
You might have to have odin up and running before you do the battery pull
nomadrider123 said:
You might have to have odin up and running before you do the battery pull
Click to expand...
Click to collapse
Good point !!!
daddysays said:
I have been in similar circumstance. Have you tried the battery methods to get into dl mode?
Remove battery and connection to computer.
plug phone back into computer
Hold volume up and down
Insert battery while holding buttons
That should work because it will put you in dl mode before it has a chance to boot loop
Click to expand...
Click to collapse
nomadrider123 said:
You might have to have odin up and running before you do the battery pull
Click to expand...
Click to collapse
Thanks for the responses i haven't heard of this method. I will defiantly try when i get home in about 2 hours and report back.
duboi97 said:
A jig
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Please explain.
A jig is a mod'ed usb device that will basically force your vibrant into download mode. Just use the method mentioned earlier....ie
Have odin up and running.
Pull battery
plug in cable
hold vol up and down
put battery in
should get you into download mode. Sometimes it took a few tries with Odin already loaded to successfully do it, but you shouldn't have any issues.
almyz125 said:
Thanks for the responses i haven't heard of this method. I will defiantly try when i get home in about 2 hours and report back.
Click to expand...
Click to collapse
Keep us posted, I follow your twitter so send a post if it works or doesnt, and Ill come on here and try to help you out if it doesnt. I have had similar soft brick issues so many times now it gets to a point where you just play with it till you recover.
Point being there is lots of ways to overcome this.
Hey man Ive been in a similiar situation as well.... this has been the ONLY way that has worked, not even the above mentioned methods.
Phone not plugged in at all yet. Battery pull for 10 seconds, put back in, BEFORE plugging in phone, hold volume up button (if this doesnt work try both volume buttons, sorry been out of the Vibrant for a while for my NS) while plugging phone in (still holding volume up button), hold till it throws into DL mode.
Hope that helps man!
dougstoner said:
A jig is a mod'ed usb device that will basically force your vibrant into download mode. Just use the method mentioned earlier....ie
Have odin up and running.
Pull battery
plug in cable
hold vol up and down
put battery in
should get you into download mode. Sometimes it took a few tries with Odin already loaded to successfully do it, but you shouldn't have any issues.
Click to expand...
Click to collapse
Thanks for the info, i may look into getting/making a jig. I would be nice to have around.
daddysays said:
Keep us posted, I follow your twitter so send a post if it works or doesnt, and Ill come on here and try to help you out if it doesnt. I have had similar soft brick issues so many times now it gets to a point where you just play with it till you recover.
Point being there is lots of ways to overcome this.
Click to expand...
Click to collapse
Thanks again.
LovellKid said:
Hey man Ive been in a similiar situation as well.... this has been the ONLY way that has worked, not even the above mentioned methods.
Phone not plugged in at all yet. Battery pull for 10 seconds, put back in, BEFORE plugging in phone, hold volume up button (if this doesnt work try both volume buttons, sorry been out of the Vibrant for a while for my NS) while plugging phone in (still holding volume up button), hold till it throws into DL mode.
Hope that helps man!
Click to expand...
Click to collapse
I've tried that method, it used to work for me. This soft brick is different than any other I've encountered. The phone has never automatically tried to boot when i put the battery into it, it makes things harder. But thanks and ill give it ago again.
No such luck with the battery method, it still just boot loops. I tried at least 2 dozen times.Anyone want to tell me how to get my hands on a jig?
almyz125 said:
No such luck with the battery method, it still just boot loops. I tried at least 2 dozen times.Anyone want to tell me how to get my hands on a jig?
Click to expand...
Click to collapse
I think that method with the battery is just referred to as a jig by some people.
I would try the battery method with odin ready to go and without, and sometimes it takes a couple tries.
Also just try holding all the buttons while unplugged, for a long time, then on one of the boot loops as soon as you see anything flicker in the screen release the power button, then try all buttons, then just volume buttons. Sometimes playing with it like that just kinda forces it.
Does odin see it in com port? Do you have correct drivers installed to use odin? Sdk installed as well?
Sent from my SGH-T959 using XDA App
Also try different combos of being plugged in and not. And recovery or download mode. Recovery will be just as useful as dl mode.
Sent from my SGH-T959 using XDA App
daddysays said:
I think that method with the battery is just referred to as a jig by some people.
I would try the battery method with odin ready to go and without, and sometimes it takes a couple tries.
Also just try holding all the buttons while unplugged, for a long time, then on one of the boot loops as soon as you see anything flicker in the screen release the power button, then try all buttons, then just volume buttons. Sometimes playing with it like that just kinda forces it.
Does odin see it in com port? Do you have correct drivers installed to use odin? Sdk installed as well?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
A jig is THIS, it shorts out pins in the micro usb port forcing it to download mode. I am positive i have the correct drivers and the sdk installed right. This isn't the first time I've been soft bricked and i am very familiar with DL mode and Recovery, and how to reach them traditionally. This soft brick is different though for what ever reason. I am going to have to try this jig, and if that doesn't work, i think ill have to read up about the jtag pins on it, if anyone has more information on jtaging a Galaxy S please post!
Did you ever end up trying the jig? I'm having the exact same problem you were. Thanks
I hard bricked a vibrant by trying to flash a rom on a low battery. Battery died in the middle of rebooting thus killing my vibrant with no way of recovery (seriously, charged the battery and the phone still wouldn't turn on... at all). Anyway, while trying to fix it, I actually made a jig. It's a lot easier than it sounds. You basically cut the plug that goes into your phone off of the cord down to where you can see all of the wires. Once you do that you break off the plastic shell that covers the plug. You then use a 301k resistor (I couldn't find that exact one so I bought 3 x 100k resistors and a 1k resistor then twisted them together).. plug the usb side into your phone then touch the opposing ends of the resistor onto wires 4 and 5 and it should go into download mode. You don't necessarily have to solder the resistor to the wires but you can. It makes it a bit easier considering you can't touch the wire part of the resistor or the static will mess up the voltage. Otherwise, Amazon sells jigs for a few bucks.
I wanted to post the url for the site that I found useful in making a jig but because I'm a "junior user" I can't. So if you search for "usb jig" on amazon there are a few; if you want to make one google "how to unbrick samsung vibrant" there is an article on factoidz called "How to unbrick your samsung vibrant/galaxy s" which I found to be the most useful.
Hope this helps!
I bought a jig off ebay and it worked like a charm! Worth its weight in gold! I now have a working phone again after being phoneless for 5 days.
Failed to replace stock recovery now get only there.
Hi, similar situation please help.
From stock 2.1 I rooted with King root Chinese zip then to go for a new ROM I renamed a cwm zip in update.zip and I read replacing stock recovery..... and saw this cwm just a couples of times, as it revert to stock recovery and doesn't switch on anymore, show grey battery logo fixed when charging, and now after removing the battery for long it goes in stock recovery se2 , cleaned cache and data but nothing change.
Is there please a solution without PC?
Thanks
My phone is a Telus t959D
I am stuck at the phone--!--PC screen. 3 button combo does not work, please do not give me other 3 button combos because it will not work. I think i need to fix this battery problem first and the download mode will come itself.
Plugging it in to the usb gives me a screen with an empty grey battery, with the progress circle in the middle frozen.
I cannot go into download mode because when i connect the usb, the grey battery pops up.
If i turn the phone on with no usb, i get the phone--!--pc screen.
http://www.youtube.com/watch?v=8ZxCzxb5RT8
so even with the battery pulled you still get the battery icon?
pspjunior said:
My phone is a Telus t959D
I am stuck at the phone--!--PC screen. 3 button combo does not work, please do not give me other 3 button combos because it will not work. I think i need to fix this battery problem first and the download mode will come itself.
Plugging it in to the usb gives me a screen with an empty grey battery, with the progress circle in the middle frozen.
I cannot go into download mode because when i connect the usb, the grey battery pops up.
If i turn the phone on with no usb, i get the phone--!--pc screen.
Click to expand...
Click to collapse
Uninstall your current installation of Kies and any samsung drivers, restart your computer, reinstall Keis from http://www.samsung.com/ca/consumer/...TLS/index.idx?pagetype=prd_detail&tab=support and download the drivers via that, restart again and check the results.
hey sendan thanks a lot. Before i do what you said i should do, how will the computer recognize my phone if it is only on the phone!PC screen because kies cant even recognize it right now?
droidstyle said:
so even with the battery pulled you still get the battery icon?
Click to expand...
Click to collapse
No, without the battery the screen is just blank because it is off if that is what you meant. If you meant if i pull it out and put it back in, then it goes to the Phone!PC screen without a USB connected. If i reinstall the batter again WITH a usb, then it freezes at a grey battery.
pspjunior said:
No, without the battery the screen is just blank because it is off if that is what you meant. If you meant if i pull it out and put it back in, then it goes to the Phone!PC screen without a USB connected. If i reinstall the batter again WITH a usb, then it freezes at a grey battery.
Click to expand...
Click to collapse
you suppose to get into download mode without the battery in.
power off and pull battery
plug usb cable in
hold vol down until the yellow triangle appears
I took out the battery, plugged in the usb, and held the volume down button. Screen stays black (left the battery out)
pspjunior said:
I took out the battery, plugged in the usb, and held the volume down button. Screen stays black (left the battery out)
Click to expand...
Click to collapse
ok.. Are you using the factory usb cable? If so, then unfortunately you may need to do one of the two things:
http://forum.xda-developers.com/showthread.php?t=1288093
or get a "Jig" and jumper the usb pins.
alright i'll try those out. And i recorded myself doing the methods and the screens i get.
http://www.youtube.com/watch?v=8ZxCzxb5RT8
Okay I watched your video...instead just take the battery out and DON'T put it back in, your computer will supply the power. Now make sure your holding the volume down button BEFORE you plug it in, and continue holding.
Or plug it in the wall adapter if you don't have powered USB Ports.
Sent from my GT-P7510 using xda premium
Alright, the screen just stays black when i do that. when i plug it into the wall or into the computer same thing
pspjunior said:
Alright, the screen just stays black when i do that. when i plug it into the wall or into the computer same thing
Click to expand...
Click to collapse
I figured, was just making sure you went through all the options before you start messing with the more advanced stuff, good luck.
sendan said:
I figured, was just making sure you went through all the options before you start messing with the more advanced stuff, good luck.
Click to expand...
Click to collapse
i bought the phone from a really good friend at a steal price of 40 bucks. I'll just give it back to him because he got it for free. It's just going to make me feel bad because anybody else in the future who has the same combination of problems might not be able to find a solution , but thanks a lot everybody! i'll just try and find a captivate or something
pspjunior said:
i bought the phone from a really good friend at a steal price of 40 bucks. I'll just give it back to him because he got it for free. It's just going to make me feel bad because anybody else in the future who has the same combination of problems might not be able to find a solution , but thanks a lot everybody! i'll just try and find a captivate or something
Click to expand...
Click to collapse
Actually I did a bit of reading, since I got stuck at that screen a long time ago, and I remember connecting to Odin at the Phone ! PC screen. You should be able to connect to Odin because it's still considered download mode. If it doesn't work you should re-install the drivers that I posted before.
I can almost guarantee it will work unless something else is really broken.
Edit: Here's some reassurance to motivate you - http://forums.androidcentral.com/t-...s-hacks/79287-odin-works-phone-pc-screen.html
there's a feature in heimdall to try and kick it out of that screen.
Sent from my Incredible 2 using XDA App
Hello,
Don't know if this has been asked but I have been looking for it for a while. Cant seem to fine a solution.
I flashed my phone wrong with hemdall now my phone wont turn on. Screen completely black i reboot pulled out the battery everything I can think of can you give me a suggestion. I was thinking about buying a USB Jig.
I'm in the same boat and I bought the Jig. However I think Josh just acts as a middle man on this one and shipping is actually from overseas. But you can find it here. http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-download-mode-jig/ I suggest a little extra shipping cost.
However the other suggestion if that is not working (I think I killed my phone) is to have Josh do a Jtag on the phone. You can find that at http://mobiletechvideos.mybigcommerce.com/samsung-vibrant-jtag-brick-repair/
Can you get into download mode? Remove battery, plug usb, press up+down vol buttons and insert battery.
hey i having same problem but i could see the vibrant samsung screen but my phone won't pass that and like you say about the usb cable and then plugging the battery i can do that as well but how can i get my phone back and running another rom!!!
Monster809 said:
hey i having same problem but i could see the vibrant samsung screen but my phone won't pass that and like you say about the usb cable and then plugging the battery i can do that as well but how can i get my phone back and running another rom!!!
Click to expand...
Click to collapse
If you can see the Vibrant Samsung screen just use Odin to flash back to stock
Kabiigon said:
Hello,
Don't know if this has been asked but I have been looking for it for a while. Cant seem to fine a solution.
I flashed my phone wrong with heimdall now my phone wont turn on. Screen completely black i reboot pulled out the battery everything I can think of can you give me a suggestion. I was thinking about buying a USB Jig.
Click to expand...
Click to collapse
The real solution here i doing a JTAG to your phone or make the Unbrickable MOD (It's very dangerous, a person with Welding and electronic skills must do this).
Another thing you can do is buy a broken Screen phone from Ebay (it more cheaply) and change the motherboard!!
My suggestion would be to continue to try to get into Download mode on the phone. My phone was DEAD no life at all plugged into the wall or PC. I kept trying to get it into download mode and magically after hours of failures, ODIN recognized the device! The phone was still DEAD no life at all on the screen but ODIN had recognized that my device WAS indeed connected. So I continued to flash back to stock and as always with a little patience ODIN was there to save me. The phone automatically rebooted after ODIN was done and BOOM! Good2Go
Goodluck!
^^I'm gonna try that and hopefully with some patience it will work. Otherwise I'm also gonna be ordering a jig, they're not that expensive. My problem is the same as the OP's. My vibrant will just not give any signs of life. I was trying to odin to stock from one cosmics ics RC3.1. Wanted to start on a fresh install for AOKP build 25. But then odin decided to fail on modem.bin. then it just hung and phone turned off, haven't been able to turn it on since. I've spent the last two hours trying to put in different combinations and keys and usb attachments to bring any hints of life, but so far nothing. Bootloader update was not checked on odin so I'm pretty confident that its not due to bootloader mismatch but someone correct me if I'm wrong. Sending it back to samsung or tmobile is very far of an option since I've modified the phone to add FFC. If anyone has any advice or hints it would be greatly appreciated. I'm kind of hating myself and flashing now since I was very happy with the rom that I had and how everything was setup. I just wanted to try something new for fun and this went and blew everything up.
^^I literally held down the buttons > plugged in the cord > put in the battery > and counted in my head the amount of seconds it took the phone to "normally" boot to where I would "normally" let go of the power button to get into Download mode, lol I know it sounds ridiculous but that's how I did it. It helped that I had my sisters working Vibrant right there, I used her phone to get into download mode and timed the process and used that as a baseline for the timing of trying to get the "DEAD" Vibrant into download mode.
If all else fails a JTAG as mentioned should fix your problem fosho!
Goodluck!
Ye I fixed it. One day I did what I had been doing the whole time and it just decided to work. Got into download mode then went back to stock. Our phone is so freaking weird yet I love the damn thing. It really is unbrickable. To anyone in this situation just never give up.
Sent from my SGH-T959 using XDA App