Hi,
A few months ago Ive been forced to uninstall sony ericson app from my comp and also the x10 driver from device manager(they started to give bsods)
I have now installed CM6 by WB but I want to install se rom again by using seus. Would I have any problems with that? Once I download and install SE software,will I have problems to reflash it? because as far as I know my pc doesnt have its drivers,or does it?
It will have the drivers in SEUS. Run repair software.
Thanks, thats what I was thinking, but I was not too sure because how I uninstalled it from DM. It just because im going to a music event and I want full working camera,with zoom.then Ill get it back on
'will try that.
Related
Hey guys, in need of urgent help.
Last night i went and installed xrecovery onto my x10. This was to allow me getting free x10 2.2.1 which i did, and i got the hotfix's and they also where fine
But heres the problem...
Didnt know if Darkys Gingerbread 2.3.1 would work for me, but i thought it would b as simple as just reinstalling/unzip the freex10 2.2.1 via xrecovery if my phone wouldnt boot. I was wrong!!!
My phones current state is sitting at the main Sony Ericsson Logo on start up. I have tried to put the phone into safe mode. Connected to the PC and no light appears. The PC sees there is a phone connected but the SD card is not seen. i have a dongle which my SD card plugs into, but i just need help...
Question - What can i do to resolve this stupidity and get my phone working properly again?
Cheers,
Jonny
I havent installed what you have but i have that happen to me before where it just hangs on the se logo
was very frustrating
all i done was use se update service software to basically reinstall the se 2.1
version...
so if everything else failed, give that a shot. it worked for me
Sl1ver said:
all i done was use se update service software to basically reinstall the se 2.1
version...
so if everything else failed, give that a shot. it worked for me
Click to expand...
Click to collapse
Sorry, i should have said that my PC sees the phone but i cant connect to the pc because i need to use the notification bar/connect USB...which i can't get to.. am i doing something wrong?
make sure you download Sony Ericson Update Service for your pc
to connect to that, you should switch your phone off, then hold in the back button while you plug the usb into ur phone...
the software shows you how to do this.
My phone didn't go past the se logo, and didnt want to connect either... but it connected to the update service which let me reinstall the original 2.1
This worked thanks a bunch!!
As per my understanding, we cannot brick the phone till the boot loader is cracked. You mess anything with the phone when flashing or when using xRecovery incorrectly, all you need to do is connect the phone in flash mode to your PC and update using Sony Ericsson Update Service or PC Companion and you will get the stock SE Rom back, and you will be ready to mess it up again
So i was running Tripnmiui and on baseband .54 and firmware 435?
and I wanted to update to the new SE Gingerbread, So i connected my phone to my computer and ran the update through the SEUS (PC companion). And it installed the update. But when i turned on my phone it kept boot looping the Sony ericsson logo..
I think i bricked my phone..
Anyone know how to unbrick it or fix it from here? with a possible tutorial?
By the way my battery is pretty low on my phone so i only have one shot.
Thanks you guys!!
Yea, Use the SEUS/PC Suite tool. Go to Update phone and search for the repair link. Connect the phone in flash mode and it ll get you back to stock.
Edit:
I would charge the phone first though, for at least like an hour.
U ran update through seus or pc companion??
Btw,try repairing it with seus again.
Sent from my X10 TripNMiUI-Iris using Tapatalk
Cant mount the phone therefore i can't Connect to SEUS
Okay follow these specific instructions (I went through the same thing yesterday when I tried to update to the new Iris ROM)
Connect the phone to your comp and start PC Companion
At the PC Companion Home Screen click on the Start button in the Support Zone Tab
Click start again under the Phone Software Update section
A message that the PC companion could not find the phone will pop up.
Click on the repair phone link there and wait.
It took almost 20 mins but my phone unbricked to Stock 2.1
After trying the azzuzu root method for fw2.3.3, I have royaly efed my phone up.
My phone is not recognized by the computer. After being on 2.3.3 it reverted me back to 2.1. Everytime I plug it up it tries to install drivers but then it says unrecognized device. It has done this on my PC and my girlfriends PC. I have tried PC companion, and flash tool and niether one of them recognize my phone! So I'm stuck with an unrooted x10i .435. Please someone help me!
vpllover said:
After trying the azzuzu root method for fw2.3.3, I have royaly efed my phone up.
My phone is not recognized by the computer. After being on 2.3.3 it reverted me back to 2.1. Everytime I plug it up it tries to install drivers but then it says unrecognized device. It has done this on my PC and my girlfriends PC. I have tried PC companion, and flash tool and niether one of them recognize my phone! So I'm stuck with an unrooted x10i .435. Please someone help me!
Click to expand...
Click to collapse
Reinstall the sony software?
Install latest SE adb driver for x10.
Sent from my X10i using XDA App
OP is a murderer.
sent from my stock gb not rooted and no add ons.
I've uninstalled, pc companion, seus, anything related 2 the phone, drivers u name it! I uninstall, restart pc, reinstall, and get the same unrecognized device error! Seems like the drivers that the phone is installing is ever up
Sent from my X10i using XDA Premium App
@OP
in short u are f****d.!
try rooting it with super one click or zroot(somethinng like that).
Yo.. let me explain something.
When i rooted and downgraded the kernel it used the old ADB drivers.
When i upgraded it required the new ADB drivers.
Maybe that is your issue.
flash the generic SE firmware with flashTool. It should work...
turn off phone - take out battery - press back key - insert usb - insert battery.
That should do the trick. Then Flashtool to stock
I probably have used this method 50 times the past 2 days trying to upgrade to GB. Always flashes ok but phone wont boot. Finally gave up and stayed with 2.1 and upgraded to MIUI. So it aint dead yet, just injured LOL
2 different computers won't recognize the phone, I can't flash with flashtool! It goes into flag mode but flashtooldoesnt recognize the phone. Somebody know how to manually install drivers?
Sent from my X10i using XDA Premium App
similar issue
i have a somewhat similar problem...i used azzuzu's method to downgrade the kernel for rooting..as it was said the phone got stuck on the sony ericsson logo and i tried to connect it according to the steps..but flashtool isnt recognising my phone anymore and busybox isnt being installed..now my phone never starts up and is always stuck at the sony ericsson logo..plz someone help sorry for posting this in your thread , feeling pretty helpless right now
Upload some pictures.
hi, I have an x10 mini pro, i've been used to flash custom roms on it and if something goes wrong i was always capable of moving back to froyo using pc companion's repair option, but i've been trying today to go back to froyo because a friend of mine bought the cell to me but she doesn't like Cyanogen mod cause it has bugs, so i plugged the phone to pc companion but it doesn't connect my phone, when i press support zone it doens't recognize the device, if i press how to connect a popup comes out, i follow instructions but the "final" option is to update pc companion, but i have the latest version. and that's it, how can i go back to froyo? im currently on gingerDx v021b.
does anyone has the files for flashtool or guide me on how to go back? thanks
plotinus said:
hi, I have an x10 mini pro, i've been used to flash custom roms on it and if something goes wrong i was always capable of moving back to froyo using pc companion's repair option, but i've been trying today to go back to froyo because a friend of mine bought the cell to me but she doesn't like Cyanogen mod cause it has bugs, so i plugged the phone to pc companion but it doesn't connect my phone, when i press support zone it doens't recognize the device, if i press how to connect a popup comes out, i follow instructions but the "final" option is to update pc companion, but i have the latest version. and that's it, how can i go back to froyo? im currently on gingerDx v021b.
does anyone has the files for flashtool or guide me on how to go back? thanks
Click to expand...
Click to collapse
You mean eclair, not froyo
I think you have to go into update phone or something in pc companion then do it from there, it doesn't matter if it recognizes the phone.
If that fails you'll have to use SEUS or flashtool, I'll try finding the files for you
I haven't used PC Companion in a while so I can't give you much advice
x10man
x10man said:
You mean eclair, not froyo
I think you have to go into update phone or something in pc companion then do it from there, it doesn't matter if it recognizes the phone.
If that fails you'll have to use SEUS or flashtool, I'll try finding the files for you
I haven't used PC Companion in a while so I can't give you much advice
x10man
Click to expand...
Click to collapse
Oh yeah. Eclair my bad!
Thanks you I'm gonna try it. If you find the files please let me know
SGS2
plotinus said:
Oh yeah. Eclair my bad!
Thanks you I'm gonna try it. If you find the files please let me know
SGS2
Click to expand...
Click to collapse
No luck in finding the files so far but you could follow the guide here and make your own ftf file specific to your operator and country - that will work best aside from PC Companion
x10man
x10man said:
No luck in finding the files so far but you could follow the guide here and make your own ftf file specific to your operator and country - that will work best aside from PC Companion
x10man
Click to expand...
Click to collapse
i'm gonna try, i think latest pc companio (2.1) doesn't have the repair option, cause i remember with older ones i was able to choose repair even with my phone unplugged...
something else, when i open seus, a loading bar apears "checking for updates", but it never gets to the end, just half way and a popup appears: "AN ERROR OCURRED, APPLICATION WILL CLOSE". and it closes... can you help?
plotinus said:
i'm gonna try, i think latest pc companio (2.1) doesn't have the repair option, cause i remember with older ones i was able to choose repair even with my phone unplugged...
something else, when i open seus, a loading bar apears "checking for updates", but it never gets to the end, just half way and a popup appears: "AN ERROR OCURRED, APPLICATION WILL CLOSE". and it closes... can you help?
Click to expand...
Click to collapse
Hmm, no I can't seem to. try running it with admin privileges and maybe XP compatibility mode if you're on vista or 7
x10man
I've manage to do it. Had to use flashtool. Thanks for the help. Thread can be closed
SGS2
Currently my phone is running Wolfbreak rom with Doomkernel and it's still fine but I am planning on flashing a new rom like Feralab or ThGo.
My problem now is that I don't have an available internet connection at home so Seus or Pc companion won't work.
Can I still fix it with flashtool or something if it ever hangs?
Use flashtool, it doesn't need Internet access
Sent from note, a phone like never before