Xperia x10a and it says I have to use xrecovery any can help thanks I'm running android 2.1 update. How do I change my baseband
Sent from my X10a using XDA App
U have to use flashtool from the x10 android developement section. Its there. All the directions are in that link of flashtool. I use the .54 baseband. It works with most 2.2 roms and the gingerbread in my signature. Ask more if u have trouble and u can add themes
Sent from XDA Premium from my X10a rooted running 2.3.2 gingerbread rom from rdannar
I'm on wolfbreak's CM 6.1.3 rom n i want to try TripNMiUI 0.0.6 Gingerbread which works on bb .52......so wat should i do first,change the bb to .52 n then install the rom or vice versa???
Flash baseband, install new ROM.
can't me more simple then that.
if you have any trouble flashIng any part, just pm me
Sent from my X10 using XDA Premium App
To update wolfbreak 4.0 to 4.1 do i just flash 4.1? and which kernel would be better to use? zKernel or tkymgrkernel?
thanks in advance
You can just install the zip file in x-recovery over the top. I haven't played around with the custom kernels yet so I can't comment on that...
Sent from my X10i using XDA App
fcb1 said:
To update wolfbreak 4.0 to 4.1 do i just flash 4.1? and which kernel would be better to use? zKernel or tkymgrkernel?
thanks in advance
Click to expand...
Click to collapse
Just flash it over the top, no need to wipe anything.
If you dont need OC and UV better use stock kernel. Stable, no issues, fps uncapped.
But if you need a stable OC/UV i recommended freekernel 4.0 by tkymgr, but custom kernel still need a time to develop to be more benefits than stock.
So far i prefer stock kernel since custom kernel still give us little benefits.
Sent from my X10i using XDA App
Where can I download the Wolfbreak 4.0 ?!?!?!?!
You can find it under the android development section. Its a custom ROM so you need to have rooted your phone to use. All the instructions on what to do are there... enjoy.
Sent from my X10i using XDA App
Hi guys....
M running on Miui 1.10.21 cobrato using goro's kernel....
Now since the tool to unlock bootloader wid the big button is released ;-) wanted to unlock the bootloader ....
But had a query ...once I dwngrade kernel using azuzu's kernel downgrade, unlock the bootloader using the tool, now hw shall I flash the goro kernel back using the flashtool?? As the kernel download provided wid the Tom thread is not a ftf bundle .... m confused on this issue... plz help...
Else can anyone plz suggest me a kernel suitable for the Tom (miui. 1.10.21 cobrato) ....after bootloader unlock ....
I must say this miui from cobrato is just awesome! Love ur work dude!
Sent from my X10i using XDA App
Sent from my X10i using XDA App
This is stock kernel and baseband collection.
Hope this will help you who need to flash baseband or revert back to stock kernel, so you dont have to download full ftf firmware.
Instructions:
1. Flash it from flashtool. if you don't have or don't know about flashtool here the thread
2. Put the ftf file you've downloaded to firmware folder under flashtool folder.
3. open flashtool, click flash/electricity image and choose the ftf then flash, put your phone to flash mode (follow instructions on flashtool).
Use it with your own risk, I am not responsible if you brick your device
This is for locked and unlocked bootloader
Link:
3.0.1.A.0.145 Kernel : http://www.mediafire.com/?9ct405pudyxs0x2
3.0.1.A.0.145 Baseband : http://www.mediafire.com/?5njws7b40khh1u3
4.0.1.A.0.283 Kernel : http://www.mediafire.com/download.php?tmc18mtizc298ny
4.0.1.A.0.283 Baseband : http://www.mediafire.com/download.php?a4m08an7ns9vb96
4.0.2.A.0.42 Kernel : http://www.mediafire.com/download.php?6oy03v67ablz875
4.0.2.A.0.42 Baseband (56) : http://www.mediafire.com/download.php?spdxdn6j99fsa3z
4.0.2.A.0.62 Kernel : http://www.mediafire.com/download.php?rp4v14001fj4y4v
Baseband 70 : http://www.mediafire.com/?vonxfycede3doto
Baseband 72 with latest stock Kernel : http://www.mediafire.com/download.php?co62xnqegcclp9s
4.0.2.A.0.62 Baseband (64) : http://www.mediafire.com/download.php?tfd8bdbdrcd4bpq
4.1.B.0.587 kernel [MT11i] : http://www.mediafire.com/?i65i9fkpir4al14
4.1.B.0.587 baseband (77) : http://www.mediafire.com/?f6x66pgbwxw3j8y
4.1.B.0.587 kernel [MT15i] : http://www.mediafire.com/?g4gmfrg0dq9hn7k, thanks to madfysh for the link
If you need anything just tell me on this thread or PM.
Don't forget to press thanks.
All the files here are for MT15i .....
Can you please upload files for MT11i .....
As i know that there is not much diff in both of them in case of kernel or baseband but still if you can upload them seperatly then it will help us a lot .....
Thanks
piku2008 said:
All the files here are for MT15i .....
Can you please upload files for MT11i .....
As i know that there is not much diff in both of them in case of kernel or baseband but still if you can upload them seperatly then it will help us a lot .....
Thanks
Click to expand...
Click to collapse
I dont think there is any different baseband and kernel between neo amd neo v, so you can flash it on neo v as well.
Sent from my MT15i using XDA App
Nice job AIM! I will mark this thread my near future need.
BTW a bit off topic: from your own experience, what baseband/kernel you think the best for signal?
Tks
BlackRatVN said:
Nice job AIM! I will mark this thread my near future need.
BTW a bit off topic: from your own experience, what baseband/kernel you think the best for signal?
Tks
Click to expand...
Click to collapse
Thanks mate
Baseband 56 from fw .42 is good for me in term of battery life but baseband 64 from fw .62 good in term of signal quality and overall quality.
And my best combination is bb 56 and stock .283 kernel.
Fyi, baseband is related to your region, what is good for me doesnt mean its good for you too.
Just give it a try.
Sent from my MT15i using XDA App
Tks, Iwill test kernel 283 with .62 baseband
Sent from my Xperia Neo using Forum Runner
Best combination is .42 baseband + .283 kernel. Epic battery life.
Can i use .283 kernel and then still install a custom Kernel ?
How can you check the version /firmware of your kernel ?
Will the version still be .283 then ?
Im new at this ^^
SleejR123 said:
Can i use .283 kernel and then still install a custom Kernel ?
How can you check the version /firmware of your kernel ?
Will the version still be .283 then ?
Im new at this ^^
Click to expand...
Click to collapse
You can use different baseband and kernel, not same time 2 different kernel.
Ask simply what you want to do and we help.
Etc you can use .283 baseband and .62 kernel
Sent from my MT15i using Tapatalk
Please can you add kernel and baseband of 3.0.1.A.145 ??
It is the only one without the famous gps bug without data traffic.
Please please please
aimcr7 said:
I dont think there is any different baseband and kernel between neo amd neo v, so you can flash it on neo v as well.
Sent from my MT15i using XDA App
Click to expand...
Click to collapse
The hardware on the Neo and Neo V isn't completely the same, Neo and Neo V have a different camera, so I think the kernel could be different for Neo and Neo V as well.
maRRRco89 said:
Please can you add kernel and baseband of 3.0.1.A.145 ??
It is the only one without the famous gps bug without data traffic.
Please please please
Click to expand...
Click to collapse
Okay mate, will be add it.
But give me some time since my PC have been broken.
Sent from my MT15i using XDA App
krabappel2548 said:
The hardware on the Neo and Neo V isn't completely the same, Neo and Neo V have a different camera, so I think the kernel could be different for Neo and Neo V as well.
Click to expand...
Click to collapse
Okay mate, will try to upload it when i have a time. My HDD was broken, i try to regenerate it using HDD regenerator today, i hope it will solve my problem.
Sent from my MT15i using XDA App
taaviu said:
You can use different baseband and kernel, not same time 2 different kernel.
Ask simply what you want to do and we help.
Etc you can use .283 baseband and .62 kernel
Sent from my MT15i using Tapatalk
Click to expand...
Click to collapse
Well I am using nightElf v9 + v0.85 Tweaked ROM + .64 baseband.
I live in europe and when I enable my data connection I have battery drains.
Ive read in other topics (around here) that going to .283 kernel solves the battery drain issue ?
thanks already !
SleejR123 said:
Well I am using nightElf v9 + v0.85 Tweaked ROM + .64 baseband.
I live in europe and when I enable my data connection I have battery drains.
Ive read in other topics (around here) that going to .283 kernel solves the battery drain issue ?
thanks already !
Click to expand...
Click to collapse
You can try combination BB 56 and .283 kernel. Ive got best battery life with those combination. Let me know if it works for you too.
Sent from my MT15i using XDA App
Today i flashed the 3.0.xxx baseband in my 2.3.4 with 4.0.2.a.0.62 firmware
with bad results, the boot stucks in Sony Ericsson logo, and i had to repair software with seus update .
So, don't flash old 2.3.3 baseband in new 2.3.4 firmwares !!!
maRRRco89 said:
Today i flashed the 3.0.xxx baseband in my 2.3.4 with 4.0.2.a.0.62 firmware
with bad results, the boot stucks in Sony Ericsson logo, and i had to repair software with seus update .
So, don't flash old 2.3.3 baseband in new 2.3.4 firmwares !!!
Click to expand...
Click to collapse
Thanks for the report mate.
Why dont you just flash back to newer bb instead?
Sent from my MT15i using XDA App
Yes, could have been a nice idea
i didn't think to it
Oh my god
perhaps i discovered why the flash has gone bad
i had not debug checked !!!
is it a possible cause?
maRRRco89 said:
Oh my god
perhaps i discovered why the flash has gone bad
i had not debug checked !!!
is it a possible cause?
Click to expand...
Click to collapse
You can't flash it if you not checked USB debugging mode, flashtool will refuse it.