Hi everyone
I got a problem with my folio 100.
The touchscreen sometimes not response suddenly for seconds when I playing a full screen game such as Friut Ninja, and then it get right again.
I tried many ROMs, include Dexter's v1.1 n v1.4 n blur1.0, Notion2.0, and even the original TOSHIBA foliostock. The issue always exists. Especially, I found that, when I use multi-touch, the problem is more likely to appear.
I'm sure that's not a hardware problem, because the screen mostly works well.
I always has that problem, in games and normal use. Problem is in bad made parts for Folio-Toshiba fault.
Sent from my GT-I5700 using Tapatalk
I´ll tell you what worked for me.
Take of back cover and tight every screw, then use an A4 paper and fold it in two.
Then put the paper on top of the battery, there´s a gap between the battery and cover, then close the folio and try it if it helped.
Mine is working great since then, and even better with cyanogen mod 7.
thanks, maybe i'll have a try.
but that seems solves the influence from the battery? I think mine can be a software problem...because i found that the touch screen stoped only when the system seems stucked
Try it , you´ll never know .
And try cyanogen mod also.
Unfortunately with our folio´s it´s a case of trial and error
Oh Gosh it works!!!!!!!!!!!!
thank u a lot!!!
i put in a paperboard rather than a thin paper and then it works!!!
thanks!!! you r so kind!!!!!
hey! try that Portuguese guy's method, just below your reply...it works on my device!! yes !!
and i forgot to say that i've tried the CM before, it's true that it is not very completed yet. and it even may cause some strange problems when you flash a elder system.
new question~
as i said before i used a thick paper. but the problems still appeared several times(much better than before)
however a too thin paper also doesn' work.
did you just used a folded A4 paper??
I had the same problem, but I brought my Folio to service, they gave me a new device, and it works perfectly! If you have a guarantee, it worth a try.
yeah that's true
i gonna have a try, though i've solved that problem by putting a little piece of sponge into the device
nightmarept said:
I´ll tell you what worked for me.
Take of back cover and tight every screw, then use an A4 paper and fold it in two.
Then put the paper on top of the battery, there´s a gap between the battery and cover, then close the folio and try it if it helped.
Mine is working great since then, and even better with cyanogen mod 7.
Click to expand...
Click to collapse
hy!
I dont understand.
Please illustration a picture, or video
Please
Thanks a lot.
Hawer
hi.
anyone can upload photo?
thanks.
I also had this problem with my Folio.
Putting something in the back between battery and casing helps for a while. But the problem just comes back, only to be solved by placing a thicker piece of paper until it breaks again. It is also not consistent to reproduce (sometimes it works perfect all day, and the next day it is a pain to use)
I had the issue when the Folio was 2 months old. After the 3rd month, I have send it back to Toshiba as I still had warranty.
It is still working now (it must be + 1 year since repair).
thanks, spicy.
i will try this night.
my folio worked perfect until last week.
i flashed android 4.1.2 but no luck.
thanks again.
spicyalan said:
I also had this problem with my Folio.
Putting something in the back between battery and casing helps for a while. But the problem just comes back, only to be solved by placing a thicker piece of paper until it breaks again. It is also not consistent to reproduce (sometimes it works perfect all day, and the next day it is a pain to use)
I had the issue when the Folio was 2 months old. After the 3rd month, I have send it back to Toshiba as I still had warranty.
It is still working now (it must be + 1 year since repair).
Click to expand...
Click to collapse
Related
ok so i have a tmobile tp2 and been having it since the first week it was released.
for the pass couple of days the call, home, and back buttons wont function like they need to.
also when i slide my keyboard up the screen goes completely black even when i close my keyboard, the only way to fix it somewhat is to keep pushing the sleep/wake button untill it turns back on.
my guess is that maybe something like a cable became loose and is causing it to have these problems, and i just wanted to hear what you guys have to say about it, or what you think the problem is and what you would recommend to fix it because i cant afford to buy a new phone for quite awhile.
Posting in the Accessories forum might not be your best shot at an answer.
lilchicano said:
also when i slide my keyboard up the screen goes completely black even when i close my keyboard, the only way to fix it somewhat is to keep pushing the sleep/wake button untill it turns back on.
Click to expand...
Click to collapse
Sounds like an app running to me. Even File Explorer (when searching the Windows folder) can cause my phone to hang for a long time. I would check in task manager to see if something is running. You can also try and app called "Clean Ram", it works great. The other option is a hard reset, to ruke out software issues. It could be harware, but I doubt it.
Miami_Son said:
Posting in the Accessories forum might not be your best shot at an answer.
Click to expand...
Click to collapse
Very true.
It's likely a loose cable as you presumed. Hopefully you still have time left on your warranty.
I hate to be the oen to say it, but it sounds like your ribbon cable is going.... My son had the same thing happen on his Kaiser/Tilt (Grandpa to this Phone)... It started like you said... then got worse over the matter of a few weeks... His screen woudl only work when it was closed... the buttongs on the screen housign stopped working properly... then his memorycard reader (it was in teh screen part on that phone) went nuts... got to the point where that phoen was basically useless... I hope that isn;t your problem, but it sounds like it..
Teej53214 said:
I hate to be the oen to say it, but it sounds like your ribbon cable is going.... My son had the same thing happen on his Kaiser/Tilt (Grandpa to this Phone)... It started like you said... then got worse over the matter of a few weeks... His screen woudl only work when it was closed... the buttongs on the screen housign stopped working properly... then his memorycard reader (it was in teh screen part on that phone) went nuts... got to the point where that phoen was basically useless... I hope that isn;t your problem, but it sounds like it..
Click to expand...
Click to collapse
yeah i can pretty much say that it is the cable since i could still slide my keyboard but the screen just looks fuzzy like and when i close it, it takes time to adjust back to normal. so basically now its just an all touch screen phone to me now... sort of sucks since i miss using the keyboard so much.
and yeah the buttons got worst now to a point where none of them worked but somehow the back button started working again so thats the only button that does work now.
and a new problem started occuring in the last few days, the screen would turn on by itself with even a slight bump around where the battery is located, it really sucks for me cause it kills my battery faster and it just starts opening up random apps while its in my pocket.
I would like to hear what finally happened. People don't forget we are using WM phones. So no matter what the problem, hard reset before deciding!
schumifer1 said:
I would like to hear what finally happened. People don't forget we are using WM phones. So no matter what the problem, hard reset before deciding!
Click to expand...
Click to collapse
wow super late response to this.
but my final verdict is that it was the flex ribbon cable that is the issue.
my TP2 doesnt even show anything no more, its still functional but you just cant see whats goin on with the screen because its like its turned off.
it stopped working on me on dec 25,2010 (what a great present from the phone, huh?) to how i described it.
so now im using my sisters old HTC dream, but even this one is starting to have an issue with the ribbon cable too! i just get bad luck with these phones now i guess.
edit: oh yeah i still have my Rhod210 just sitting on my desk till i get it fixed... oh how i miss my TP2!
Another late response then
Fixed it yet, have you?
this occasionally happens to my phone too, that it, the screen blanks out sometimes. the cause in my case is pocket lint. since it's hayfever season, i carry tissues in my pocket which kind of disintegrate to confetti after a while. while my tp2 is in my pocket, these tissue particles tend to get in behind the ribbon cable and cause some kind of blockage. by just blowing in around the ribbon cable area, it tends to clear out those fluffy bits and the screen is working again. so don't carry tissues in your pocket with your tp2
schumifer1 said:
Another late response then
Fixed it yet, have you?
Click to expand...
Click to collapse
i actually took the time to open up the touch pro2 all the way today for a full diagnosis on it, and i was right. it was the cable. where the cable is exposed when it tilts, it looks like it sort of got stripped around that area. im not sure how but it left part of the cable exposed which im guessing is whats causing it to have the issue. i was taking a couple of pictures as i was disassembling it, but i forgot to take a picture of the cable itself to show you what i mean. maybe ill disassemble it again tomorrow so i can take a pic! =)
but yeah im still using the g1, and i finally fixed it! (ended up bricking a g1 so i used the other as replacement parts on it) but hopefully not for long cause graduation is tomorrow for me, and i MIGHT end up getting a new HTC phone as a graduation present from the family. so i hope that does happen!
ok so i reopened the touch pro 2 and took a pic of the cable to show you what i ment.
well i have an odd problem, one one section of my screen doesn't pick up touches, only the area where the "C" is on the keyboard...its annoying due to thats where the OK buttons are...
i can still navigate sense i can use the track ball..
anyone else have this issue, or something similar?
Try wiping back to factory if stock or reflash the rom if rooted?
I had a weird issue with the touch screen on condemned 18.3 where on the lockscreen trying to drawdown the slider and then draw the pattern, it would freak out and glitch and not follow my finger at all and take several tries to get the pattern correct.
I then wiped and flashed the latest 4.0 GSB and haven't had any issues since.
That's not quite a touch screen failure as yours is, but I thought it would help as an example as something gone wrong and how I was able to remedy it.
i've tried flashing a few different roms, went from cs18.3 to a 2.1 sense rom, back to the latest gsb. it appears its must be a problem with the digitizer...
really sucks, i have to wait to april to upgrade this phone...
might be on craigslist looking for a cheap droid 1...
Ah man, that's unfortunate. Probably wouldn't be worth it to try to replace the screen/digitizer either. Yeah, that's probably your best bet, looking to get another phone. That's how I got my Eris, from craigslist. Great way to go about doing so.
Good luck to ya.
I actually have the same problem and something leads me to believe that an update is causing this. I had it bad a few weeks ago (can't press C, V or X - though I can swipe to the keys sometimes) and then I got a few market updates for Handcent, SuperUser, and something else which then cleared it up for a few days. Then I got more updates and it's back to the failing keyboard!
I really don't know how to pin point it and I haven't done any resetting or testing yet, but I have like gut feeling something is wrong with the software, not the touchscreen since someone else is having this problem.
Mine has been failing little by little. Im now down to the top right corner, bottom left, and bottom middle not responding. It hard to even get the apps drawer to open. It all started with the letter C with me too. Just gets worse.
****, my whole qwerty row doesn't work, neither does the trackball. Upgraded to a SGS2, but I still tinker with the ol' eris.
mine moved, it started working fine for a few days, then just a smaller section to the left of C doesn't work, only really effects when i have an "OK" to press...but track ball still works and typing is so much easier now.
my wife thinks its because i dropped my phone that it started working again
I know this thread is a couple of months old, but...
There's an area on mine at the top right below the notification pull-down that appears to be dead. I'm thinking it's because I've dropped it about 10 times, but nothing looks wrong with the screen otherwise. I've thought about buying a replacement screen for about 15 bucks, but I'll be able to upgrade at the end of March, so I'm really just thinking about holding off (though if the new screen/digitizer worked, it'd make for a good mp3 player with the wifi script).
Digitizer is going bad. Same exact problem happened to mine. I replaced it myself and it works perfect. I found how to videos on youtube and bought a digitizer for about $37 online. Only took a half hour to tear apart and replace. On the difficulty level, I'd give it a 6 or 7.
MBL85 said:
Digitizer is going bad. Same exact problem happened to mine. I replaced it myself and it works perfect. I found how to videos on youtube and bought a digitizer for about $37 online. Only took a half hour to tear apart and replace. On the difficulty level, I'd give it a 6 or 7.
Click to expand...
Click to collapse
YMMV.
Someone gave me an Eris that had digitizer problems along the lower left side of the screen (in portrait orientation). I bought a replacement digitizer ($22 iirc), installed it, and it worked perfectly - for about the first 30 minutes. Then, the problem re-appeared in exactly the same location with the new digitizer.
Same behavior for a variety of stock or developer ROMs, so highly doubtful that it was a "software problem". Very very odd - the chip that does the capacitive sensing is on the flex circuit attached to the digitizer, so it gets replaced when you replace the digitizer; I suppose that the signals that come off the mini-connector between the digitizer assembly and the phone's mobo are only power, ground, and I2C signals.
But there you go; taken all those observations together, I'd suspect that I had a problem on the phone's motherboard which was thermally dependent.
Despite my (negative) experience, the odds are still in favor that a digitizer replacement will fix the problem; but there is an outside chance that it won't.
just sayin',
bftb0
So my bro's had an Atrix for a little over a year.
Some time back, it started exhibiting this behaviour where the whole screen would just become totally unresponsive.
Searching around, I see issues where people lose responsiveness with a fraction of their touch screen, or the entire screen starts spazzing out with all these presses and swipe actions the user did not enter...
...but his just seems to have these periods. He'll be stuck at the lock screen from anywhere between 1 minute and a whole day... I can usually get it to work with random rapidfire hardware commands... and when it works, it works completely for a certain amount of time.
Thing is, that's only temporary, and the touch-screen ends up going back to an unresponsive state.
Any clue what's going on, or how to resolve it?
What's the software is he currently on? Is the phone bootloader unlocked and/or rooted?
Sent from my ATRIX using the Premium XDA App
You know what's (not so) funny about this? All of the things that you think are causing this sound really complicated. Is my phone corrupt? hardware defective?? etc etc.
You know what I found it caused this behavior after numerous factory resets and weeks of research and tweaks to my phone?
The f-ing goddam screen protector.
Yep, that's right. The over-priced, highly (over)rated $20 iShields brand one. I know for a fact that was the cause, after I figured it out and started talking to other atrix owners (minus the liar fanboys that lurk in every forum saying "works fine for me derp!" whenever someone dares to suggest a product has flaws).
Problem immediately went away, forever. I've gone naked since May /11 without a single scratch. IMO screen protectors on gorilla glass is for people who wear a seat belt in a car wash. I'm not sure, but I suspect the problem happens when the screen protector starts to age, and/or when it gets really warm. I also suspect it's a problem with certain phones and the types of touchscreens on those phones not playing nice with screen protectors. Started happening on mine after just one month.
omnius1 said:
You know what's (not so) funny about this? All of the things that you think are causing this sound really complicated. Is my phone corrupt? hardware defective?? etc etc.
You know what I found it caused this behavior after numerous factory resets and weeks of research and tweaks to my phone?
The f-ing goddam screen protector.
Click to expand...
Click to collapse
That rant's nice and all, and I'mma let you finish... but there's no screen protector. He's been going bare gorilla all since he got it...
Voelker45 said:
What's the software is he currently on? Is the phone bootloader unlocked and/or rooted?
Click to expand...
Click to collapse
Just to offer some backstory, this started a couple months ago back when he just had the stock AT&T rom (2.3.X or 2.2.X I think? I can't recall clearly) During one of it's "working" periods (last week), I unlocked his bootloader and flashed it with CM9...
Probably won't mean much since the problem existed before I unlocked+CM9'ed it, but while it's not freaking out, I can give you some numbers:
• Model Number: MB860
• Android Version: 4.0.3
• Baseband Version: N_01.77.15P
• Kernel Version: [email protected] #47
• CyanogenMod Version: 9.0.0-RC0-olympus-KANG
omnius1 said:
The f-ing goddam screen protector.
Click to expand...
Click to collapse
Yeh, I have had this problem with screen protectors interfering with capacitive screens before, I am now using some really cheap protectors (5 for £3) and have had no such problems since and have a good bit of pocket money left .
TLRtheory said:
That rant's nice and all, and I'mma let you finish... but there's no screen protector. He's been going bare gorilla all since he got it...
Click to expand...
Click to collapse
ah ok in that case, I have nothing else, I'm only good for ranting. GL!
My touchscreen randomly does these freak outs and stops working:
Usually for me it is caused when the phone is really warm (like on the charger in the car) or when my hands are sweaty (also could just be the the phone is warm in this case as well)
Once it's done with its freak out, I turn off the screen (my power button still works) and clean off the screen with my shirt, wipe the sweat off my hands and turn it back on...everything is then fine.
Also, with my old phone (dell streak) if I kept the phone in my pocket with the screen facing towards my leg it would exhibit this behavior (probably again a case of the screen becoming really warm) but if I kept it screen out it was fine.
I have the same exact problem and have gone back to my Captivate because I couldn't figure it out.
Sent from my Touchpad using XDA
News on this? Here's my experience.
Any news on this, guys? I'm going insane. Here's my experience: I used to get these touchscreen-stops now and then but then they started getting more and more often. What I do to make them stop for a while is a clean restore, that is wiping boot, system, preinstall, cache, userdata with fastboot before installing a new ROM or restoring from backup. Whenever I do that, it comes back to life. If I flash a new ROM without all those wipes, it doesn't work. What sucks so bad is that, even though that fixes the problem, it's only temporary. It starts again after a few weeks. There is NO way this is hardware, and there's also NO way we can't find a solution for this!!!! Come on, guys!!! HELP US OUT, PLEASE!!!!!!!
Have you tried the raindrop fix? I was having similar problems and it worked for me.
Sent from my MB860 using xda premium
My screen has ghost fingers if my hands are even the slightest damp.
A buddy of mine had really bad touch screen issues and had to send back for warranty.
Sent from my MB860 using xda app-developers app
I'm having the same issue
I'm having the exact same issue. It sometimes works, sometimes doesn't. Anywhere from one minute to a whole day, everything you described exactly. No screen protector. I wiped it once and it worked temporarily, but it's back to the old sporadic unresponsiveness again.
I'm still not convinced that it isn't a hardware issue. I'm going to buy a T5 Torx Screwdriver and open her up and see if one of the connections is loose. Has anyone else done this?
I'll post tomorrow night with my results.
Here is a handy trick to determine if your digitizer it going out.
1. Find an appliance like a cable set top box, AV receiver or computer for example
2. Lay your phone face down in the warm air that emits from devices like this.
3. Leave it alone for about 10 to 15 minutes.
4.Pick your phone up and perform some finger swipe heavy tasks.
If you notice its a lot more sensitive like you remember when you first got it then you have a digitizer that is going bad. If nothing changes then its most likely software related.
Okay so I took it apart (removed the motherboard, disconnected the radio and 3 cables, then put everything back together. It's not fixed 100% but it's a lot more consistent than it was. youtube dot com/watch?v=kxuF_73YIIY
cjmillisock said:
Okay so I took it apart (removed the motherboard, disconnected the radio and 3 cables, then put everything back together. It's not fixed 100% but it's a lot more consistent than it was. youtube dot com/watch?v=kxuF_73YIIY
Click to expand...
Click to collapse
Could be the ribbon behind the digitizer, if its loose or moves it can kill all response to touch. You may have to replace your digitizer to fix this.
Sent from my MB860 using xda premium
I'm dying here
I opened it up like the video explained. Everything looked OK. I used a heat gun at 50 C to eliminate any trace of humidity and put back everything in its place. Then, I did a full wipe and a new ROM flash. STILL NOTHING!!! This phone is a little over a year old! This is not possible :crying: Any new ideas???? THANKS!!!!
pichualvarez said:
I opened it up like the video explained. Everything looked OK. I used a heat gun at 50 C to eliminate any trace of humidity and put back everything in its place. Then, I did a full wipe and a new ROM flash. STILL NOTHING!!! This phone is a little over a year old! This is not possible :crying: Any new ideas???? THANKS!!!!
Click to expand...
Click to collapse
I would also suspect the digitizer. I replaced mine for $45 (frame pre attached attached highly recommended).
The connections are very small, so there is much that can go wrong while doing this kind of brain surgery and the ribbons will rip easily.
Sent from my MB860 using Tapatalk 2
Same problem here. It is like some Ghost is operating it without my permission
Sometimes feels like is should hit the phone on the wall.
I know its not gonna help.
Anybody there who has solution for this
Hello all
This is my first post here so let's hope I do everything correctly here
I have a Sony xperia Live with walkman (wt19i) which I dropped unfortunately and decided to replace it after a while because I was annoyed by all the cracks and was up for an experiment.
After a long search, I came up with this:
amazon.com/gp/product/B006MQFFZQ/ref=cm_cr_ryp_prd_ttl_hst_1
I also posted my findings there already to help other people who might want or need to replace their digitizer as well.
But the bottomline is that the screen sometimes just locks up or starts acting weird... then I have to lock/unlock and it is all OK again for a while.
At least once a day I have to take out the battery because the trick I explained above doesn't work anymore at all.
The hardware buttons do.
I have the idea that when I keep playing a game for too long; it locks up faster, so the device warms up.
I guess I already know the answer but I was hoping that someone had any idea's how to fix this as I already did the installment of the digitizer over again without much luck.
Thnx in advance!
Jelle
Hello! I was facing the same trouble with my Xperia Mini Pro which unfortunately expired yesterday.
I had to replace the digitizer+Lcd whichI bought off eBay (money wasted). One thing that you should see is what you use for sticking the screen unit to the phone (I am assuming that it was stuch to the phone using some kind of adhesive as this is the case in Xperias and maybe others too).
When I replaced mine, it was working fine until I used (very carefully) quick drying adhesive on the edges. My guess is that some of that got between the digitizer and the lcd by seeping in because after that, I started to experience the SAME issues as you. For me sometimes, rebooting would be the only thing to make it work again.
I hope it gets fixed for you soon. It only went downhill for me though
navneetkhare said:
Hello! I was facing the same trouble with my Xperia Mini Pro which unfortunately expired yesterday.
I had to replace the digitizer+Lcd whichI bought off eBay (money wasted). One thing that you should see is what you use for sticking the screen unit to the phone (I am assuming that it was stuch to the phone using some kind of adhesive as this is the case in Xperias and maybe others too).
When I replaced mine, it was working fine until I used (very carefully) quick drying adhesive on the edges. My guess is that some of that got between the digitizer and the lcd by seeping in because after that, I started to experience the SAME issues as you. For me sometimes, rebooting would be the only thing to make it work again.
I hope it gets fixed for you soon. It only went downhill for me though
Click to expand...
Click to collapse
Hi there and thx for your reply.
Sorry to hear that you are experiencing the same kind of problems.
Unfortunately I've had this problem from the beginning, when I unpacked it, I could already see that it wasn't an original part under bright light.
I've used 1mm Wide Double Sided Layer Adhesive Sticky Tape Sticker for Mobile Phone, which I also bought on Amazon, despite of how hard it was to apply, it the replacement went fine with it.
The second time I took apart my phone just to see if I did connect everything well, I also re-applied the sticky dual sided tape.
But that did't really help.
But so i've someone has some knowledge or knows some tricks I can experiment with, that would be nice
I read something about heating up the phone like this thread here for example: http://forum.xda-developers.com/showthread.php?t=1041943
I'm willing to try that if there is really no other option
But as I said, it's probably just a badly constructed digitizer I got from China.
Jelpot said:
Hello all
This is my first post here so let's hope I do everything correctly here
I have a Sony xperia Live with walkman (wt19i) which I dropped unfortunately and decided to replace it after a while because I was annoyed by all the cracks and was up for an experiment.
After a long search, I came up with this:
amazon.com/gp/product/B006MQFFZQ/ref=cm_cr_ryp_prd_ttl_hst_1
I also posted my findings there already to help other people who might want or need to replace their digitizer as well.
But the bottomline is that the screen sometimes just locks up or starts acting weird... then I have to lock/unlock and it is all OK again for a while.
At least once a day I have to take out the battery because the trick I explained above doesn't work anymore at all.
The hardware buttons do.
I have the idea that when I keep playing a game for too long; it locks up faster, so the device warms up.
I guess I already know the answer but I was hoping that someone had any idea's how to fix this as I already did the installment of the digitizer over again without much luck.
Thx in advance!
Jelle
Click to expand...
Click to collapse
You changed the screen?! Fire! even though I can do nothing helpful....sorry...
Linnunium said:
You changed the screen?! Fire! even though I can do nothing helpful....sorry...
Click to expand...
Click to collapse
No, I only replaced the digitizer.
The screen was still fine and they weren't really stuck together
Jelpot said:
No, I only replaced the digitizer.
The screen was still fine and they weren't really stuck together
Click to expand...
Click to collapse
But digitizer and screen are one unit and not intended to be separated. Maybe that's the problem!
Sent from my Nexus 4 running Android 4.3
mihahn said:
But digitizer and screen are one unit and not intended to be separated. Maybe that's the problem!
Sent from my Nexus 4 running Android 4.3
Click to expand...
Click to collapse
Yes, I've read that here before, but my mind cannot really get around the why... ?
It wasn't like they were stuck together that I could damage the other when replacing it.
Neither were the parts sold together.
The screen still works and the digitizer as well, it's not like it's not working at all.
The digitizer just stops working after a while and when I lock/unlock again it works fine again.
As far as I remember I also had do connect the digitizer to the mainboard, not the display itself.
It isn't an easy issue, that's for sure
Hello to everyone, a few days ago my watch started shutting down after a while, sometimes write after boot and sometimes after 5 or 10 minutes or so. I tried reverting to stock settings (factory reset) also sync it with a new account from other phone, I even installed Everest Rom and still it shuts down after a few minutes. Also sometimes it gets very hot, all over the watch not only at the bottom or the front glass.
The watch is in my possession for around 1,5 year and it is the international version.
Same behavior, is the result of water geting in...
How is that possible , it is water resistant!?
Did you open it easily?
psillos said:
How is that possible , it is water resistant!?
Did you open it easily?
Click to expand...
Click to collapse
It was used a year, never taken off the hand unless charging., so it got into sea swiming, hot showers/baths, everything, and i did not kept it in clean water for 10 min, or what the manual says... . So all that chemicals and salt afected the seals ...
It was opened by the service guys, i sent it for waranty, which they ofcourse void it (apparantely no device is covered by waranty if liquides get inside them ... ?!?)
I will try to test if is fixable by my self.... with no water resistance...
Thank you my friend for your time and answers, I will try to open it and see if this is wrong with my watch too. Last year after every swim I did clean it up but this year I never did so maybe this is what happened to mine also.
My problem was not from getting water in
psillos said:
My problem was not from getting water in
Click to expand...
Click to collapse
Can't really tell from the image, but it looks like there is some corosion/oxidation on the capacitors near the sensor ? (seems like some green/blue colored contacts). If so, maybe try to gentaly clean it, it could make electrical contact between components that should not be in contact.
Also look at the battery and see if there is any visible damage to it
... my battery is 0 volts, and a little puffy, i will try to see if it takes charge.
If yours got extremely hot as mine did, pls consider the safty issues of the situation
Cisf said:
Can't really tell from the image, but it looks like there is some corosion/oxidation on the capacitors near the sensor ? (seems like some green/blue colored contacts). If so, maybe try to gentaly clean it, it could make electrical contact between components that should not be in contact.
Also look at the battery and see if there is any visible damage to it
Click to expand...
Click to collapse
I think you are wright my friend, I 'll get back home and see it more closely and try to clean it up and see if that helps.
Well you were wright about sensor
I tried to clean as good as I could but with no luck , I also checked the battery and it seemed ok to me.
Then I decided to cut the sensor power by cutting the cable that connects to it and then booted up the watch and everything is working fine ,no shutdowns, no overheating problems and no battery consumption at all. I guess that the sensor is no longer working at all and it isn't anymore waterproof but at least I have a fully functional watch until i decide what to do. Thanks again for pointing out the corrosion-oxidation of the sensor. The only thing I cannot comprehend is how did that happen to the sensor capacitors, since there where no moisture inside the watch!?!?
Thanks again my friend!