this is regarding this thread http://forum.xda-developers.com/showthread.php?t=1064558
can sumone please give me a very detailed instructions how to do this...its really confusing for me since im a newbie..i really want the multitouch feature on my phone...pleaseeeeeeeee..i dont get when the say "goto any shell.the so on so forth....i really dont know wat to nxt. can sumone be so kind to explain it step by step...please......
"Also edit your build.prop and add the lines below:
ro.product.multi_touch_enabled=true
ro.product.max_num_touch=2 "
^what does this mean????really cluless
I rooted my phone already...downloaded the driver the extracted it then im stuck...
thanks a bunch!!!
Bump...sumone please help!!!
More info, rom, baseband ??
still has the original Sony Ericcsson OS...never changer ...changes ive done was just by rooting it...thanks so much..my concern were just ignored by others
You need to do this:
http://forum.xda-developers.com/showpost.php?p=13497850&postcount=49
attached here
http://forum.xda-developers.com/showpost.php?p=13498312&postcount=53
Please thanks to teapea
D4rKn3sSyS said:
You need to do this:
http://forum.xda-developers.com/showpost.php?p=13497850&postcount=49
attached here
http://forum.xda-developers.com/showpost.php?p=13498312&postcount=53
Please thanks to teapea
Click to expand...
Click to collapse
I followed your advice, ive downloaded the file but it wont let me paste it to the given directory (/system/etc/permissions...).I dont get it...what should i do so it'll allow me...help... also, once it transferred,should it work immediately after that???
HELPPPP!!!! Thanks!!!
wilger_18 said:
I followed your advice, ive downloaded the file but it wont let me paste it to the given directory (/system/etc/permissions...).I dont get it...what should i do so it'll allow me...help... also, once it transferred,should it work immediately after that???
HELPPPP!!!! Thanks!!!
Click to expand...
Click to collapse
Have you mount rw?
In rootexplorer theres a button in the right corner. Press the button once n test again
Ro=read only
Rw=read,write
Sent from my U20i using Tapatalk
X10_minipro said:
Have you mount rw?
In rootexplorer theres a button in the right corner. Press the button once n test again
Ro=read only
Rw=read,write
Sent from my U20i using Tapatalk
Click to expand...
Click to collapse
ive transferred the file "android.hardware.touchscreen.multitouch.xml" to /syste/etc/permissions already...rebooted and still nothing...what am i missing....???HELP!!!
Instructions:
Copy .ko
Edit hw_config
Copy permissions
Enjoy ?
D4rKn3sSyS said:
Instructions:
Copy .ko
Edit hw_config
Copy permissions
Enjoy ?
Click to expand...
Click to collapse
Sorry if im berng stupid....i didnt understand everything u posted above....if you dont mind telling it step by step....coz i really dont speak ur language (technically, i meant)...pardon me from getting on ur nerves...and thanks for the patience...
i rooted my phone (still in original SE OS)...downloaded ES file/root explorer...copied the .xml file to the said directory....thats all what ive done...sorry...if im bering really slow...
bump!!! Bump!!!
well now do that.
1.copy cy8ctma300_ser.ko to system/lib/modules and set permisions
x-x
x
x
2.edit hw_cofing.sh in system/etc
add line: insmod /system/lib/modules/cy8ctma300_ser.ko
and save it.
3.edit build.prop in system/
add lines: ro.product.multi_touch_enabled=true
ro.product.max_num_touch=2
reboot phone and enjoy
1. copy cy8ctma300_ser.ko to /system/lib/modules/
2. go to hw_config.sh in the /system/etc/hw_config.sh
3. open it with a text editor
4. add this code in the beginning of the file:
"insmod /system/lib/modules/cy8ctma300_ser.ko"
"sleep 1"
5.save the changes u have made to hw_config.sh
6. also edit the build,prop in the system folder:
ro.product.multi_touch_enabled=true
ro.product.max_num_touch=2
7. reboot the phone and u r good to go.
can someone pls send me "hw_config.sh" for mini pro, i accidently deleted it
twingley said:
can someone pls send me "hw_config.sh" for mini pro, i accidently deleted it
Click to expand...
Click to collapse
You got it in rom zip and copy it to your phone
Sent from my U20i using XDA Premium App
samanvai said:
1. copy cy8ctma300_ser.ko to /system/lib/modules/
2. go to hw_config.sh in the /system/etc/hw_config.sh
3. open it with a text editor
4. add this code in the beginning of the file:
"insmod /system/lib/modules/cy8ctma300_ser.ko"
"sleep 1"
5.save the changes u have made to hw_config.sh
6. also edit the build,prop in the system folder:
ro.product.multi_touch_enabled=true
ro.product.max_num_touch=2
7. reboot the phone and u r good to go.
Click to expand...
Click to collapse
i did everything u said still nothing....my phone still has the original os just to let you know.... not sure where exactly i should type those lines....i mean beginning or end...plsss...help!!!
wouldn't it be easier for you to just flash a rom which already has a multitouch in itself? you already rooted your phone, there's not much you can do wrong, and you can always restore if you do your backups on time
edit: plus, custom roms are in many cases much better than stock
thanks....its already working...thank you for all the walkthroughs you have posted....!!!!!
Related
since I can not post directly in the discussion, I have to open a separate thread.
I used the file for dual touch using insmod and it worked.
Now I wanted to make sure that it is fixed with the phone, I read the procedure and tried to follow her, but I do not find any files bulid.prop ....
Where is it?
Please help me.
build.prop is in
root, system folder
tell me if it works for you, I tried this and I couldn't get it to work.
Ray_jai said:
build.prop is in
root, system folder
tell me if it works for you, I tried this and I couldn't get it to work.
Click to expand...
Click to collapse
using it without changing the files, it works QuickPic, Copilot.
In google maps does not work. Not even in browsers like Opera or Ninesky.
But I thought that by modifying these files, worked in the rest.
Thanks! I found the file "build.prop",
Where is the other file "hw_config.sh"? Because what I found I had no voice "insmod" ...
DomusX10 said:
using it without changing the files, it works QuickPic, Copilot.
In google maps does not work. Not even in browsers like Opera or Ninesky.
But I thought that by modifying these files, worked in the rest.
Thanks! I found the file "build.prop",
Where is the other file "hw_config.sh"? Because what I found I had no voice "insmod" ...
Click to expand...
Click to collapse
hw_config.sh is in ur "etc" folder... are you using root explorer???
You do know you can use the search function OF the root editor too...
DomusX10 said:
using it without changing the files, it works QuickPic, Copilot.
In google maps does not work. Not even in browsers like Opera or Ninesky.
But I thought that by modifying these files, worked in the rest.
Click to expand...
Click to collapse
Not sure what ROM you're using, but you may need this file to get the other apps using dualtouch:
http://forum.xda-developers.com/showpost.php?p=13497850&postcount=49
teapea said:
Not sure what ROM you're using, but you may need this file to get the other apps using dualtouch:
http://forum.xda-developers.com/showpost.php?p=13497850&postcount=49
Click to expand...
Click to collapse
this is the problem?? I've Stock ROM 2.1update1 with firmware 2.1.1.A.06
then, I have to create that file and copy it into /system/etc/permissions with rootexplorer...
now I try this...and you know I do!
EDIT: NOT WORKING...I have create that file (copy and paste the code in the frame in a txt file, and renamed android.hardware.touchscreen.multitouch.xml) then I've paste it into /system/etc/permissions and associated it permission rw-r-r
rebooted and not working...single touch.
yet launched from the console does the dual touch working in some applications ... why?
EDIT 2: Please do not send me to hell, but by creating the file and rebooting, if I launch "insmod" from the console, dual touch works in all apps!
How is it possible, however, that the changes to make it start with phone not work?
I want to work "even" when I restart the phone!
Did you try this version?
http://forum.xda-developers.com/showpost.php?p=13498769&postcount=56
I couldn't get it to work when doing it manually. but when I load it from the SD card through adb it works.
I ended up using the AAIS script and replacing the module in the AAIS with the one in the link.
Ray_jai said:
I ended up using the AAIS script and replacing the module in the AAIS with the one in the link.
Click to expand...
Click to collapse
I use that on the first post dedicated at my firmware 2.1.0.A.06
http://forum.xda-developers.com/showthread.php?t=1064558
manually loaded by terminal emulator work in every app. But, the procedure to autorun this module with telephone when start, don't work.
I do not know which is doing a script AAIS, because I'm not well prepared ... I do not know how to do it ...
use this.
http://forum.xda-developers.com/showthread.php?t=951274
Ray_jai said:
use this.
http://forum.xda-developers.com/showthread.php?t=951274
Click to expand...
Click to collapse
thanks!
With this script you can enable and disable a lot of things ... I can just see if it works ...and let you know ...
I wanted to ask, but what is JIT? what does it do?
thank you in advance for availability ..
EDIT: Works!!! without launching the script, I went just to see how the command was written in the file "hw_config.sh" ...
I corrected, and after restarting, it works!
I was wrong because we put the quotes, but no need to write.
The correct lines of code to be included in the file "hw_config.sh" (at bottom) are:
# load multi touch driver
insmod /system/lib/modules/cy8ctma300_ser.ko
sleep 1
After you have copied into system/lib/modules "cy8ctma300_ser.ko" , mounted it as rw-rr , and edit the file "build.prop" as indicated in the post.
works!!!
thanks!!!!
check t out guys forum.xda-developers.com/showthread.php?t=1275329
T's working in mine!!!
INSTRUCTIONS
1.Download the zip from the original thread
2.Open the zip using winrar and delete framework-res.apk and build.prop from it
3.Reboot into recovery and flash the zip
4.Using root explorer navigate to systen and add the following lines at the end of your build.prop
ro.drm.active.num=4
ro.drm.active.0=semc,1
ro.drm.active.1=cmla,0
ro.drm.active.2=viaccess,0
ro.drm.active.3=marlin,1
#ro.semc.product.name=robyn
#ro.semc.product.device=robyn
#ro.semc.product.model=robyn
ro.semc.sols.product-code=83
ro.semc.sols.company-code=5
persist.ro.ril.sms_sync_sending=1
# Disable strict mode checking
persist.android.strictmode=0
ro.service.swiqi.supported=true
persist.service.swiqi.enable=1
# fix for screen redraw
ro.HOME_APP_ADJ=1
For timescape add the following lines
# Timescape Mode
ro.semc.timescape_keys=Sony_Ericsson_Xperia
#ro.semc.timescape_keys=Sony_Ericsson_Xperia_PLAY
If you are using mini pro change 'robyn' to 'mimmi' while adding the text to build.prop
5.Save the file and reboot
PERSONALLY TESTED BY ME ON THE X10 MINI!!!!
Can you tell us what to do exactly
Sent from my E10i using XDA App
drsughosh2000 said:
Can you tell us what to do exactly
Sent from my E10i using XDA App
Click to expand...
Click to collapse
copy text in this file to your build.prop
http://db.tt/PsaGy9bM
and the permissions for all content is 644?
because .. i got freeze when reboot and system wont start ..
seevik said:
and the permissions for all content is 644?
because .. i got freeze when reboot and system wont start ..
Click to expand...
Click to collapse
x10 mini pro users copy text from this file
http://db.tt/B8uqnwUm
let me know if it works
widget doesn't work.. and in TS app the letters are not readable..
please re-activate download link for xperia x10 mini . thanks
There are several files inside the zip. Do we have to copy files to corresponding system folders and set permission individually or can we flash the zip through recovery after removing the build.prop?
Sent from my E10i using XDA App
drsughosh2000 said:
There are several files inside the zip. Do we have to copy files to corresponding system folders and set permission individually or can we flash the zip through recovery after removing the build.prop?
Sent from my E10i using XDA App
Click to expand...
Click to collapse
you can flash it.. after that edit your build.prop
doomhammer07 said:
check t out guys forum.xda-developers.com/showthread.php?t=1275329
T's fully working in mine!!!
Don flash the update directly... extract the contents of the zip file and delete build.prop from it... then using root explorer go to system/build.prop and add the lines from attachment file in post 3 to it... copy the other files to their appropriate locations, set proper permissions and reboot
Click to expand...
Click to collapse
We must have to flash it through cwm and then edit the build.prob.
If we move all the files to their respective location then while moving files to system/framework the framework.apk will be replaced and then it will start force close the rootexplorer and we wont be able to set its permission to 644!! Thus framework will get changed and we will be unable to change its permission and also we cant open setting and many other things that are framework dependent!!! finally we need to factory reset or reinstall the rom!
It happened with me so I'm warning you!!!
So just flash the file then after edit the build.prob using cwm as this app integration needs to replace the framework!!
—---—---—-—----—
Press thanks!!! :thumbup::thumbup::thumbup::thumbup::thumbup:
Sender : Amazing XPERIA X10 SuperMINI!
jodhaniohm97 said:
We must have to flash it through cwm and then edit the build.prob.
If we move all the files to their respective location then while moving files to system/framework the framework.apk will be replaced and then it will start force close the rootexplorer and we wont be able to set its permission to 644!! Thus framework will get changed and we will be unable to change its permission and also we cant open setting and many other things that are framework dependent!!! finally we need to factory reset or reinstall the rom!
It happened with me so I'm warning you!!!
So just flash the file then after edit the build.prob using cwm as this app integration needs to replace the framework!!
—---—---—-—----—
Press thanks!!! :thumbup::thumbup::thumbup::thumbup::thumbup:
Sender : Amazing XPERIA X10 SuperMINI!
Click to expand...
Click to collapse
hey. wht should we edit in build.prop ?? can u clearly explain it please?? step by step??
It's framework dependable? I mean, it need moded framework to work? Because I have ICS Status Bar layout + TN Transition + ICS Lockscreen, and I don't want to lose it.
Sent using Mini CM7 Pro by Paul
siddardha21 said:
hey. wht should we edit in build.prop ?? can u clearly explain it please?? step by step??
Click to expand...
Click to collapse
whic rom are you using??
jodhaniohm97 said:
We must have to flash it through cwm and then edit the build.prob.
If we move all the files to their respective location then while moving files to system/framework the framework.apk will be replaced and then it will start force close the rootexplorer and we wont be able to set its permission to 644!! Thus framework will get changed and we will be unable to change its permission and also we cant open setting and many other things that are framework dependent!!! finally we need to factory reset or reinstall the rom!
It happened with me so I'm warning you!!!
So just flash the file then after edit the build.prob using cwm as this app integration needs to replace the framework!!
—---—---—-—----—
Press thanks!!! :thumbup::thumbup::thumbup::thumbup::thumbup:
Sender : Amazing XPERIA X10 SuperMINI!
Click to expand...
Click to collapse
oops!!! forget about the framework.. delete both build.prop and framework-res.apk and then flash!!!! don flash it with the framework-res.apk.. you will get a bootloop
Felimenta97 said:
It's framework dependable? I mean, it need moded framework to work? Because I have ICS Status Bar layout + TN Transition + ICS Lockscreen, and I don't want to lose it.
Sent using Mini CM7 Pro by Paul
Click to expand...
Click to collapse
no it is not framework dependable... delete build.prop and framework-res.apk and then flash
i'm on gintonic nd slade's kernel!
siddardha21 said:
i'm on gintonic nd slade's kernel!
Click to expand...
Click to collapse
Instructions updated.. and since you are using x10 mini pro, wherever necessary change 'robyn' to 'mimmi' while editing your build.prop
I am on xperia x10 mini pro.. N I am gettin force close for timescape when I got to its settings..cant proceed..
N people do not delete the framework.apk or build.prop from ur system folder using rootexplorer .. Ur phone will be behave. Wierd n get stuck later wont boot.. u need to flash the ROM again n ur user data will be lost..!! There is a proper way of replaiing the framework.apk ..
Gintonic.SE + zombie-pack kernel by slade ..
Thanks
Work fine on x10 mini miniCM 2.1.5 with naA 06 kernel.
Working on mini pro Stronmix rom. Timescape and photo widget works only with xperia launcher
How to change the status-bar background?
i want to change the transparent black background with the image in attachment so that it match my theme.
So which files i have to replace with this background?
Using xPeria Mini with stock ICS ROM
So no help?:crying:
piousheart said:
So no help?:crying:
Click to expand...
Click to collapse
Try to post in Themes and Apps section.
Publiuss said:
Try to post in Themes and Apps section.
Click to expand...
Click to collapse
What is this thread?
mobilephone01 said:
What is this thread?
Click to expand...
Click to collapse
Actually this thread was in general but i moved it
And guys will you all please stick to the topic..any help?
maybe this ??
http://forum.xda-developers.com/showthread.php?t=1786889
iiandskater said:
maybe this ??
http://forum.xda-developers.com/showthread.php?t=1786889
Click to expand...
Click to collapse
See here is my systemUI.apk please add the image at OP (opaque)
piousheart said:
See here is my systemUI.apk please add the image at OP (opaque)
Click to expand...
Click to collapse
Why not do it yourself? There is plenty of TUT's around that help you decompile and recompile apks.
evilbarcode said:
Why not do it yourself? There is plenty of TUT's around that help you decompile and recompile apks.
Click to expand...
Click to collapse
I tried but when i recompile it & push it in system\app with proper permission, after rebooting phone it stuck bootlogo..
The same happens when i tried to decompile DefaultThemes.apk & MusicWidget.apk they both were not installed...
then i searched & found that we have to compress the resources.arc blablablaaa... & signing with recompiling system apk..
Still after giving a lot of tries i dont understand how to use signing & compress resources.arc blablaballl idk..
If you know than may be you can teach
Rebooted my phone 100z of time to check every method i found but no success
Now i dont wana harm my phone, rebooting it again & again for the things that isn't working for me...
See this thread, i asked on xda but people aren't explaining properly, they just stop answering after certain question:crying:
piousheart said:
See this thread, i asked on xda but people aren't explaining properly, they just stop answering after certain question:crying:
Click to expand...
Click to collapse
Well, I am a bit on the busy side.... I assume you didn't try my tool then?
To do this manually, you need to first recompile your apk after you've done all your changes. You already know this bit.
Then:
Make a copy of the old apk
Use 7zip to open both the copy and the recompiled apk
Drag the 'res' folder from the recompiled apk to the copy
Close the copy
Extract 'resources.arsc' from the recompiled apk
Add 'resources.arsc' to the copy, selecting 'STORE' compression
Close the recompiled apk
Open the copy and check that resources.arsc has the same size and packed size
Reboot the phone and go into recovery
Mount the /system partition
Push the apk straight to the right folder
Unmount the /system partition
Reboot the phone
Wait for it all to load
Wait a bit longer
Wait a bit longer still
And you're done.
If you've pulled the app from the phone to a Windows PC then you don't need to worry about permissions. That's only when you copy the app to your sdcard or pull the app using Linux.
Going into recovery might not be needed. Pushing system apps while the phone is running can cause some nasty bugs so I always use recovery just to play it safe. You'll need to reboot most of the time anyway to see the changes you've made.
Instead of pushing, you could make a flashable zip. As an amazing coincidence, Tickle My Android can do that too.
Ticklefish said:
Well, I am a bit on the busy side.... I assume you didn't try my tool then?
To do this manually, you need to first recompile your apk after you've done all your changes. You already know this bit.
Then:
Make a copy of the old apk
Use 7zip to open both the copy and the recompiled apk
Drag the 'res' folder from the recompiled apk to the copy
Close the copy
Extract 'resources.arsc' from the recompiled apk
Add 'resources.arsc' to the copy, selecting 'STORE' compression
Close the recompiled apk
Open the copy and check that resources.arsc has the same size and packed size
Reboot the phone and go into recovery
Mount the /system partition
Push the apk straight to the right folder
Unmount the /system partition
Reboot the phone
Wait for it all to load
Wait a bit longer
Wait a bit longer still
And you're done.
If you've pulled the app from the phone to a Windows PC then you don't need to worry about permissions. That's only when you copy the app to your sdcard or pull the app using Linux.
Going into recovery might not be needed. Pushing system apps while the phone is running can cause some nasty bugs so I always use recovery just to play it safe. You'll need to reboot most of the time anyway to see the changes you've made.
Instead of pushing, you could make a flashable zip. As an amazing coincidence, Tickle My Android can do that too.
Click to expand...
Click to collapse
Thank you brother i will try it
and yes i have your tool too, it helped me to restore system fonts when i messed with it & had a bootloop:victory:
Great tool:good:
BTW can i use winrar instead of 7zip?
Where is 'STORE' compression can be found in winrar?
How to check that resources.arsc has the same size ( same size compared to with file? ) and packed size?
piousheart said:
Thank you brother i will try it
and yes i have your tool too, it helped me to restore system fonts when i messed with it & had a bootloop:victory:
Great tool:good:
BTW can i use winrar instead of 7zip?
Click to expand...
Click to collapse
Excellent. I'm glad it helped.
Technically, you could use any archival program but it has to be one that lets you add files to an archive without compressing them. I find 7zip to be fairly quick and user-friendly. Plus, it's free which is always a good thing.
Ticklefish said:
Excellent. I'm glad it helped.
Technically, you could use any archival program but it has to be one that lets you add files to an archive without compressing them. I find 7zip to be fairly quick and user-friendly. Plus, it's free which is always a good thing.
Click to expand...
Click to collapse
Where is 'STORE' compression can be found in winrar?
How to check that resources.arsc has the same size ( same size compared to with file? ) and packed size?
piousheart said:
Where is 'STORE' compression can be found in winrar?
How to check that resources.arsc has the same size ( same size compared to with file? ) and packed size?
Click to expand...
Click to collapse
I don't know. I don't even know if winrar can do it. That's why I suggested using 7zip instead.
To check sizes, just open the app (again, this is using 7zip) and look at the numbers to the right of resources.arsc. One is the original size of the file, the other is the size it's been compressed to. These need to be the same.
Ticklefish said:
I don't know. I don't even know if winrar can do it. That's why I suggested using 7zip instead.
To check sizes, just open the app (again, this is using 7zip) and look at the numbers to the right of resources.arsc. One is the original size of the file, the other is the size it's been compressed to. These need to be the same.
Click to expand...
Click to collapse
Leme have my hands on some app..
Edit : I tried this but when ever i put it back to sdcard and look at it the app loses its icon ( just a green android logo ) and when i put it in syste\app with proper permission & then restart it doesn't install and even i tried to install as normal apk then it says parse problem..
What i am doing wrong i followed the same procedure above & also the size of resources is same.
piousheart said:
Leme have my hands on some app..
Edit : I tried this but when ever i put it back to sdcard and look at it the app loses its icon ( just a green android logo ) and when i put it in syste\app with proper permission & then restart it doesn't install and even i tried to install as normal apk then it says parse problem..
What i am doing wrong i followed the same procedure above & also the size of resources is same.
Click to expand...
Click to collapse
I got your pm asking me to reply to this. I do most of my android modding stuff during spare moments at work because I don't have the time at home so I'd have gotten round to answering this in time.
I'm not sure what you're doing wrong here. Since you're got my tool installed, try using that first. If that works, then we know that there's something going wrong with the manual procedure and we can fix it.
If it doesn't work, then there's something wrong with the mod you're doing and we need to fix that instead.
Ticklefish said:
I got your pm asking me to reply to this. I do most of my android modding stuff during spare moments at work because I don't have the time at home so I'd have gotten round to answering this in time.
I'm not sure what you're doing wrong here. Since you're got my tool installed, try using that first. If that works, then we know that there's something going wrong with the manual procedure and we can fix it.
If it doesn't work, then there's something wrong with the mod you're doing and we need to fix that instead.
Click to expand...
Click to collapse
Okay thanks..
So i tried to mod even after knowing that it wont work as before..
So what i did in DefaultThemes.apk is edited the Androidmanifest & string files to change the name & nothing else
is i am doing it editing wrong file and yes how can i use your tool for this?
Originally Posted by Ticklefish<br />
I got your pm asking me to reply to this. I do most of my android modding stuff during spare moments at work because I don't have the time at home so I'd have gotten round to answering this in time.<br />
<br />
I'm not sure what you're doing wrong here. Since you're got my tool installed, try using that first. If that works, then we know that there's something going wrong with the manual procedure and we can fix it.<br />
If it doesn't work, then there's something wrong with the mod you're doing and we need to fix that instead.
Click to expand...
Click to collapse
<br />
<br />
Okay thanks..<br />
So i tried to mod even after knowing that it wont work as before..<br />
So what i did in DefaultThemes.apk is edited the Androidmanifest & string files to change the name & nothing else<br />
is i am doing it editing wrong file and yes how can i use your tool for this?
Click to expand...
Click to collapse
To be honest, I don't know how to change the name of an app. It's something I've never done before.
I suspect that you've gotten the mod wrong somewhere but unfortunately I can't advise on where that could be.
Sorry, mate.
Optimus L9 APK Push Tool!!
First, all credit goes to kevev for putting this all together, and saving me from pulling my hair out
Instructions via kevev readme!
This script will automatically push apk files along with a shell script to your device
under /mnt/sdcard/external_sd/APKs. It will then run the shell script which will copy
the apk files to /system/app/ and change the file permissions to 644.
No warranty included!!
Use at your own risk!!
1.) Place all apk files in the "APKs" folder that you want installed in the /system/app/ folder on your rooted device.
2.) Connect device to your computer after installing the correct adb drivers.
3.) Enable "USB Debugging" on the device and wait for the driver to install.
4.) Run "PushAPKs.bat" and reboot your device when it finishes only if there are "NO" errors.
Click to expand...
Click to collapse
Now go thank kevev
CLICK
"I am not responsible if your phone does the following" ..
bricks - blows up - runs away to france
DOWNLOAD
CLICK
iB4STiD said:
1. if you own a 769BK click here to download 10e system apps backup
(if you own a p760 etc.. ask some nice person on this forum for that missing apk!)
2. next click here to download the optimusl9 zip and unzip this on your desktop!
3. take out your removable sdcard from your phone
4. place missing apk into the root of your removable sdcard and replace sdcard back into phone
5. get your usb cable and plug your phone into pc
6. on your computer open command prompt and type this
** type the following, one line at a time, followed by hitting the enter key! **
Code:
cd desktop
cd optimusl9
7. next adb time! fun huh?
** type the following, one line at a time, followed by hitting the enter key! **
Code:
adb shell
su
mount -o remount,rw /system
cat /sdcard/external_sd/LGHome3.apk > /system/app/LGHome3.apk
chmod 644 /system/app/LGHome3.apk
reboot
"I am not responsible if your phone does the following" ..
bricks - blows up - runs away to france - leaves you for another owner
:highfive:Donations are Welcome!!:highfive:
- DONATE
Click to expand...
Click to collapse
Good tutorial, though not required by me as yet. :good: Even easy for noobs. Liked the last warning too. :laugh:
cmahendra said:
Good tutorial, though not required by me as yet. :good: Even easy for noobs. Liked the last warning too. :laugh:
Click to expand...
Click to collapse
thanks .. lol
Great...it works with framework-res too
I changed dafault green smiles with smiles from SE Xperia...and everything works...when I tried it with file manager, everything was fine, but I can't set permissions, because I had always popup with errors And I had reinstall system...but this works super Thanks
Will this work on P765 too? Someone tried yet?
wlado93 said:
Great...it works with framework-res too
I changed dafault green smiles with smiles from SE Xperia...and everything works...when I tried it with file manager, everything was fine, but I can't set permissions, because I had always popup with errors And I had reinstall system...but this works super Thanks
Click to expand...
Click to collapse
Glad it helped!
cmahendra said:
Will this work on P765 too? Someone tried yet?
Click to expand...
Click to collapse
yup this will
working on an even easier way to do this
i have a questions..
how about deleting everything from system/app folder for example? what should i type?
i already deodex system/app and system/framework...so i want to replace all with deodex apk and remove the odex file..
hope that you can guide me..
bramprasetyo said:
i have a questions..
how about deleting everything from system/app folder for example? what should i type?
i already deodex system/app and system/framework...so i want to replace all and remove the odex file..
hope that you can guide me..
Click to expand...
Click to collapse
thats what im working on, make a batch file in a dir along with a folder that you can place all apks in, click the bat and it does the rest, i asked around just waiting, i have it working for my themes in the theme section, i just want an easy way not to have to type out all that code
for every apk an odex file. a couple of lines is one thing but being able to drag anything into a folder no mater what the name, would be easy for us all!!
iB4STiD said:
thats what im working on, make a batch file in a dir along with a folder that you can place all apks in, click the bat and it does the rest, i asked around just waiting, i have it working for my themes in the theme section, i just want an easy way not to have to type out all that code
for every apk an odex file. a couple of lines is one thing but being able to drag anything into a folder no mater what the name would be easy for us all!!
Click to expand...
Click to collapse
sorry for my english.. sometime it hard for me to understand.
you are working on a project that can make us easy to do that right?
so.. as for my question, do you mean that i should type for all that apk and odex? cant do with for example "*.apk" ?
bramprasetyo said:
sorry for my english.. sometime it hard for me to understand.
you are working on a project that can make us easy to do that right?
so.. as for my question, do you mean that i should type for all that apk and odex? cant do with for example "*.apk" ?
Click to expand...
Click to collapse
ya, hoping i can get help to figure it out, and yes for every .apk and odex file you would have to type it out, if your deodex a rom then it would be just .apks for the system, apks and jar files for the framework
iB4STiD said:
ya, hoping i can get help to figure it out, and yes for every .apk and odex file you would have to type it out, if your deodex a rom then it would be just .apks for the system, apks and jar files for the framework
Click to expand...
Click to collapse
ok than...
good luck with your project..
thanks
bramprasetyo said:
ok than...
good luck with your project..
thanks
Click to expand...
Click to collapse
no prob!
Update coming
working on a easier way to do this, almost done..
HOwdy!
I hope I didn't steal your thunder.
Here is an automated way to push APKs to /system/app/ .
https://www.dropbox.com/s/x264413ck099yv4/optimusl9 APK Push.zip
kevev said:
I hope I didn't steal your thunder.
Here is an automated way to push APKs to /system/app/ .
https://www.dropbox.com/s/x264413ck099yv4/optimusl9 APK Push.zip
Click to expand...
Click to collapse
lol, very nice... now heres my question what you did in the sh script could that be done in just a bat file?
iB4STiD said:
lol, very nice... now heres my question what you did in the sh script could that be done in just a bat file?
Click to expand...
Click to collapse
I guess everything could have been done from the batch script. It was just starting to look messy and I am more comfortable with shell.
To tell the truth, I am very rusty with batch scripting. I haven't messed with DOS in ages. Unix all the way!
kevev said:
I guess everything could have been done from the batch script. It was just starting to look messy and I am more comfortable with shell.
To tell the truth, I am very rusty with batch scripting. I haven't messed with DOS in ages. Unix all the way!
Click to expand...
Click to collapse
well, you did a great job... want me to post this is main op of this thread?
and btw talk about messy you should see what i was making lol
also b4 i forget if you do want me to post this is it ok its tied to your dropbox?, you could throw it up on dev host or if you want i could, up to you
iB4STiD said:
well, you did a great job... want me to post this is main op of this thread?
and btw talk about messy you should see what i was making lol
Click to expand...
Click to collapse
haha! If you could see some of my other scripts I think your eyes would cross and never go back to normal.
Sure, go ahead and post it. It is free code. No license necessary.
kevev said:
haha! If you could see some of my other scripts I think your eyes would cross and never go back to normal.
Sure, go ahead and post it. It is free code. No license necessary.
Click to expand...
Click to collapse
K, thanks again ! brb
i was making some changes to build.prop than replaced the build.prop file using es file explorer.after reboot phone is going into bootloop. can someone please help me create a flashable cwm build.prop file .i searched and tried to create my own but doesnt work and for adb i dont have computer at hand so my only option is flashable zip.please someone help
i have a attached the required build.prop file
GaganPla said:
i was making some changes to build.prop than replaced the build.prop file using es file explorer.after reboot phone is going into bootloop. can someone please help me create a flashable cwm build.prop file .i searched and tried to create my own but doesnt work and for adb i dont have computer at hand so my only option is flashable zip.please someone help
i have a attached the required build.prop file
Click to expand...
Click to collapse
I would do that for you, only, I don't see an attachment.
neo.ank said:
I would do that for you, only, I don't see an attachment.
Click to expand...
Click to collapse
thnx for ur concern and help neo ....but i already formated my phone ....
Okay. But if you try to edit it again, make sure the settings doesn't make it unstable.
DROID RAZR with Tapatalk 4