I had installed TNT Lite v 4.3.0 a couple of weeks ago and it was working pretty good. But today my tablet has gone into a bad state. Every app that I run results in FC. Even the ADW launcher EX that I had selected default is crashing. It then gives me the options: ADW Laucher, ADW Launcher EX, and the regular Launcher. The plain ADW Launcher also fails, but fortunately the regular Launcher still works so I can access the apps.
But unfortunately almost every app that I am trying fails. The only one that doesn't fail is the Web browser. The Settings starts and I can access Applications menu but once I choose say System Applications, after that if I try to choose some other option such as Installed Application, it crashes as well.
Last night however when I started the tablet the battery was probably down and while it was powering it up, it turned off and then restarted by itself and then turned off, without reaching the lock screen. I don't know if it has something to do with all this.
What do I do now? Any help will be appreciated.
Thanks.
A well known issue.
http://forum.xda-developers.com/showthread.php?t=896395
This is why I'm an advocate of people doing the partitioning right before they flash their first custom rom. This way, they won't have to wipe everything later on.
I could only wonder why people aren't mentioning this in every custom rom thread.
Thank you so much. Will try it out tonight.
Unfortunately it seems I have run into a worse issue (without even doing anything yet). Now when I power it on, it starts and shuts off within a few seconds, just shows the birds for like 5 secs and bang, black screen.
The tablet is fully charged (if I put it on charge the light turns green in no time). Looks like the battery is dead.
You might be dropping into APX mode. Do you know how to use nvflash?
Thanks for the reply. You are absolutely right. After multiple tries it did boot up and I was able to install clockworkmod and it all worked great. It wiped off everything but I could live with that. And I turned it off and back on and it was working fine.
But then it went back into the same mode - shutting off immediately after turning on. I decided to return this tablet thinking that it is bad. But before I would do that I thought to restore it or else Viewsonic won't honor the warranty. So I started reading the thread about restoring the tablet to stock using nvram flash. In that procedure it requires me to put the tablet in APX mode and that's when I thought that maybe it is going into APX without pressing the volume - button.
Anyway I was successfully able to flash nvram. Or so it said. I still have the output from the batch file. But now my tablet is totally bricked. It does not boot at all. No pretty birds for me.
I hope there is some way out of it. Please help.
Edit: After re-flashing and using a different file, it seems to have made it a little better. At least I am seeing the birds again. But the original problem of shutting off, or going into the APX mode without pressing Volume button, has returned. All I am getting is the birds for a few seconds and then black screen. I will continue to retry, and if I see it booting up successfully to the stock, this thing is going back to the factory.
1) What image did you use to nvflash?
2) What happened when the flash was finished? Did it boot normally at least once?
3) Does the screen just stay dark all the time now?
1) First time nvflash_gtablet_46_2010112600.zip and after that it did not boot at all. Only black screen. I flashed it couple of times, no avail. Later I flashed nvflash_gtablet_2010110500.zip. This at least recovered it enough that it shows the birds, but soon after the screen turns black. I have confirmed that it is going in APX mode. If I have USB cable connected to my PC, the PC reports discovering the NVIDEA APX device.
2) It hasn't booted normally since I flashed nvram.
3) No I get the birds, but after that it turns dark.
Ok. Using Bekit's 1105 image...
1) Replace part9.img with the recovery.img out of the clockworkmod installation zip.
2) Put the tablet into APX mode.
3) Type in the command to start nvflash but before you hit the enter key hold down the Volume Up key and continue to hold it down until the flash finishes.
4) The tablet should boot into clockworkmod recovery.
5) Repartition 2048 and 0
6) Clear everything (cache, data and dalvik)
7) You might need to re-nvflash at this point.
Thanks for your response. I tried it. Did not work. When you say Replace part9.img with the recovery.img, does it mean copy recovery.img into the NVFlash directory and rename it to part9.img or leave it as recevery.img. I renamed it to part9.img and backed up the original part9.img to part9.img.tmp. The size of recovery.img and the original part9.img are very different. I am confused. Please help.
K J Rad said:
Ok. Using Bekit's 1105 image...
1) Replace part9.img with the recovery.img out of the clockworkmod installation zip.
2) Put the tablet into APX mode.
3) Type in the command to start nvflash but before you hit the enter key hold down the Volume Up key and continue to hold it down until the flash finishes.
4) The tablet should boot into clockworkmod recovery.
5) Repartition 2048 and 0
6) Clear everything (cache, data and dalvik)
7) You might need to re-nvflash at this point.
Click to expand...
Click to collapse
Yes, that is exactly what I meant.
Are you sure you're holding the volume UP key? Birds and then black screen is APX mode which is normally entered by holding volume DOWN.
Well it goes into APX mode even if I don't press any Volume button at all. That is the problem I am trying to fix. When I press power button (without touching the volume button) the birds come and then black screen. And this is APX mode because if I am connected to the PC it brings up an NVIDIA APX device on the PC.
Now if I press the Volume UP button along with the power button, nothing happens, not even the birds come up.
So the fact that the recovery.img (3.7k) is much smaller than part9.img (16k) is ok? Or I am doing something wrong.
Any ideas?
I was thinking about formatting the gtablet. Please let me know if this is the right move, or there is something else I could try first.
shah123 said:
Well it goes into APX mode even if I don't press any Volume button at all. That is the problem I am trying to fix. When I press power button (without touching the volume button) the birds come and then black screen. And this is APX mode because if I am connected to the PC it brings up an NVIDIA APX device on the PC.
Now if I press the Volume UP button along with the power button, nothing happens, not even the birds come up.
So the fact that the recovery.img (3.7k) is much smaller than part9.img (16k) is ok? Or I am doing something wrong.
Click to expand...
Click to collapse
A little more than "It did not work" would be helpful.
What step failed? Please tell me what happened after each step.
Did you get into CWM and repartition?
Did you get everything cleared?
What happened when it rebooted?
What was the original filename of the image you tried to flash?
What version of clockworkmod do you have installed?
Have you ever used ROM Manager?
All of this is important and no one can help you if you don't provide enough information.
Oh, I am sorry. Here are the answers to the questions you asked:
What step failed? Please tell me what happened after each step.
Ans: Out of the 7 steps you provided, the steps 1, 2 and 3 worked fine. It is the step 4 that failed (and of course I can't proceed with the steps anymore). In other words I cannot go into clockworkmod recovery.
Did you get into CWM and repartition?
Ans: No I was not able to do so. If I press power and Volume Up key at the same time, nothing happens, screen remains black, not even birds come up.
Did you get everything cleared?
Ans: I believe you are referring to step 6. No, I could not get to that step.
What happened when it rebooted?
Ans: Nothing showed up. Because when Volume Up is pressed while it is powered on, nothing shows up on the screen.
What was the original filename of the image you tried to flash?
Ans: Actually first time nvflash_gtablet_46_2010112600.zip (and this is before you provided the 7-step recipe - see post #6, 7, 8 of this thread) and after that it did not boot at all. Only black screen. I flashed it couple of times, no avail. Maybe that was my mistake. I chose a wrong file. Later I flashed nvflash_gtablet_2010110500.zip. This recovered it enough that it shows the birds now, but soon after the screen turns black (goes into APX mode).
What version of clockworkmod do you have installed?
Ans: v08
Have you ever used ROM Manager?
Ans: No. What is it?
I really appreciate your help.
What happened at the end of step 3?
Did you start holding the volume UP before you pressed the return key for the nvflash? If not... go back and do it again.
Did you continue to hold it until the flash was happening? You must continue to hold it down for at least 5 - 10 seconds after the flash starts.
When the flash was done did it say "Recovery Key detected" on the screen? If it didn't say this that is an indication that you didn't hold the volume UP key long enough.
If all of the above was done correctly and did happen but you didn't get to clockworkmod then what did you get? Did it look like stock recovery?
It sounds to me like you did the nvflash then tried to reboot into recovery.
Its unbelievable. Tonight when I powered it on it started booting up normal instead of going into the APX mode. I was glad. The stock UI came up, but some of my apps like Quadrant, File Expert etc were still there. It also notified me of the Update 3588. So I downloaded it and started installing it. Pretty soon it rebooted itself (sooner than I thought - I don't know if the remaining installation was supposed to happen after the reboot).
But instead of booting up into 3588 it is unfortunately gone back to the same old issue - the birds followed by black screen - aka APX mode. It never booted up after that. No matter how many times I tried to reboot, it goes into APX mode just like before. I don't know what caused it to complete bootup. One thing I noticed was that the battery was totally drained when I started tonight. I don't know if the drained battery somehow took it out of the APX mode. But now it has a little bit of charge because of hooking up to power supply. I have disconnected the power supply and will leave it in APX mode over night and try it again tomorrow when the battery would be totally drained and see if it boots up fully.
To answer your questions though:
What happened at the end of step 3?
The screen went black and after that it stayed black. No CWM.
Did you start holding the volume UP before you pressed the return key for the nvflash? If not... go back and do it again.
Yes, I did.
Did you continue to hold it until the flash was happening? You must continue to hold it down for at least 5 - 10 secondsafter the flash starts.
Yes, I continued to hold it all the way until the flash completed and the screen went black and quite some time after that.
When the flash was done did it say "Recovery Key detected" on the screen?
I don't think it did.
If it didn't say this that is an indication that you didn't hold the volume UP key long enough.
So I guess I need to give it another try. Tomorrow I will try to reboot the tablet again and if it continued to go into APX I will do the nvflash one more time.
If all of the above was done correctly and did happen but you didn't get to clockworkmod then what did you get? Did it look like stock recovery?
A black dark screen. No CWM or stock recovery.
It sounds to me like you did the nvflash then tried to reboot into recovery.
No at the time of nvflash I held the Volume UP button and nothing happened. Since then I have been trying to bootup or put it in CWM Recovery but only thing the tablet wants to do is go into APX mode.
So I guess my theory of "drained battery takes it out of the APX mode" is correct. I tried to reboot the tablet several times but it just kept on going into the APX mode until the battery was completely drained. And then it started booting up normally but it went into some installation (probably the stock 3588 that I had downloaded in the previous successful bootup). And then the green android with the exclamation sign came and the exclamation sign was rotating for a second or two and then stopped. And it looked like it was hung. I waited for a minute or two but nothing happened, so I pressed one of the buttons, I don't know if it was Menu or Back button, and all of a sudden clockworkmod recovery screen came up.
I have attached the picture of the screen. It still shows the green android with the exclamation sign in the middle of the screen, along with the CWM Recovery.
One other thing I noticed and I am not sure if it is normal is that if I choose say Reboot System Now from CWM menu and it shows like 10 entries with many No's and only one Yes. I can only use the volume Up + button to go down, if I try to go up using volume Down - button it does not go up. Is that normal? Is the only way to go is go down using Voume Up button in CWM menus? I have a feeling that my Volume Down button has gone crazy and it is not functioning properly and that is what is causing it to go into APX mode at the startup as well.
Anyway I first attempted "Apply SDCARD:update.zip" hoping that it might continue with the stock 3588 installation, but that failed. You can see the messages in the picture. Then I tried the Factory Reset and it was successful. I then rebooted the tablet. But now again it keeps on going up into APX mode. I will have to wait until tomorrow for it to completely drain battery again and then try to reboot again.
Any ideas? I know it is overwhelming and the behavior is very weird. At this point I am trying to bring it back to the stock firmware so that I can get this tablet replaced under warranty.
There are quite a few things that are not acting normal from what I see here.
Did you try to repartition 2048 and 0? If not, I would start with that then I would format everything and re-nvflash a stock ROM onto it. That might clear things up. If not you could be looking at a hardware reset.
Hello everyone ... I think I dun goofed, but perhaps someone knows something that I don't :\
So today I wanted to switch to a new Custom ROM... standard procedure I guess. Without doing anything, btw, apart from using my phone, I got several random reboots into bootloop today, especially while texting, which I didn't get at all, but didn't mind because they ceased after several times.
So I get home and get cracking ... backup my Contacts, try to make a NANDROID backup, which gets stuck while backing up /data ... which I didn't get, but unfortunately CWM didn't wanna react after this, so I had to hard reset, and lookie lookie, it rebooted into Android. Now, however, nothing works.
I put in the battery, the bootloop begins, not even a press of the Power Button is needed, I press the combination for Download Mode, actually SEE THE WARNING SCREEN, can't however proceed because the reboot begins immediately after, and CWM won't load either
Does this mean I'm pretty much f'd in the a?
EDIT: Welp, seems like removing the battery right when the loop starts makes it so that I have to press the power button again which makes me able to access both Android and CWM, I literally have no clue how this could have come.
I have a Tmobile HTC One M7 that I paid $300 for. It was awesome! However, I wanted to root it. So I successfully unlocked the bootloader, installed TWRP and then proceeded to attempt to root. Something went wrong and now this thing is useless! I cannot tell you where it went wrong because when the first sign of trouble appeared I started doing all kinds of **** to try and fix it, none of which worked and I have lost track of what I did in the process of trying to root and then subsequently trying to fix. I know there were some wipe cache, wipe dalvik cache, install zip from SD, I may have even tried to flash a custom ROM without the thing being rooted. I have been reading for days, trying this, trying that to no avail. The phone is brand new, without a scratch. It will power up like normal, but when it gets to the lock screen where you swipe the little lock in the bottom tray to use the phone it will not respond at all! It recognizes the network because it is displayed in the notifications bar up top, it can see the signal strength, it knows what time it is, it knows what the date is, but it will not get past the damn lock screen. ADB sideload works. I was able to push a zip and flashed it, even said android is upgrading when I rebooted, but it did not solve my problem. It will not power off, but when I hold the power button down, to turn it off the back arrow < and home symbol flash and after about 10 seconds a dialog box pops up that says to restart your phone continue to press and hold the power button and starts a countdown. Once the countdown gets to zero it restarts. If I hold the volume down button while doing this it will go into the boatloader and I can get into recovery. Apparently there is no backup to restore because when I try a restore I get the same exact same thing. I thought I had done one, I must have erased it somehow. I have been trying to resolve this for weeks now and am at my wits end. Any suggestions please !?!? Will anyone on this forum take it if I ship to them and fix for a fee? Otherwise this things going in the trash.
Well, I installed a few 4.3 roms to check them out, and I had some problems.
One of the roms corrupted my EFS (had a backup). But now I got signal back and everything
Thing is when I long-press power button, it just shuts down, I cant access power menu anymore.
What could the issue be?
EDIT: Thing is, before flashing these roms, the button worked perfectly fine. I just pressed it to recovery mode. Now it just shuts down.
EDIT 2: Fixed it. The culprit was Factory Mode. Hahaha, hopes this helps people.
Im having this problem again, and Factory Mode didnt solve it. Anyone happened this before?
I was using a 4.3 rom fully working, and then I just restored a nandroid. Then I dont know how I lost my EFS folder. I restored it but Im still having the power menu problem.
I tried using the factory mode line change and it didnt work. Now I long press my power button and it justs shuts down.
Hello and thank you for anyone bothering to read this.
I got a CAT S50 and was experiencing a bit of instability lately.
I've run LTE_S0201121.0_S50_0.023.00 without a hitch for a while, then it decided to crash several applications, from google play to any other app open.
That's when I decided to do a factory reset and see if it would help. Performed the rest without a hitch, but the errors kept coming back. At one point, the screen went black. I knew the phone was on because the backlit was working. I hard-reseted it (hold the power button for 30 seconds or more) and rebooted. The phone froze on the CAT splash logo screen and that's when I hard-reset it again. But when I tried to turn it on, the phone simply refused to work. No vibrate, sounds or anything. It's dead.
When I plug it on the computer's USB, the PC makes a sound as if it detected the device, but when I go to the device manager, I get this QHSUSB_BULK with the yellow exclamation mark
I want to know if it is possible to unbrick this phone and if so, if there is a tutorial or if someone can direct me to the correct procedure. I looked everywhere for the ftf file for this phone to attempt this with flashtool, but I simply can't find it.
ANY help of any form is greatly appreciated.
Sadly I had the same thing happen to me, just a black screen. It decided to delete recovery mode or I just cant get to it.
Power Off the Phone,
While pressing Press Vol Down + Cam Button insert a Powersource -- hold down Vol Down + Cam
Recoverymenu should start
Then flash the original rom via ADB Sideload or SD Card.
btw. i have flashed the LTE_S0201121.0_S50_0.023.00 but i want test older ROMs!
can anyone link or upload an older ROM ?
Guy i have the same issue, can you please help me
I got the same problem I search lots place but still nothing then normal update rom anyone can help?