Hi guys;
I have several question about this magnificent phone:
1) Right now I have GingerBlur version 2 Installed (with root +recovery mod). What do I need to do in order to install version 3.5?
2) Is there IGO for android users?
Have a nice weekend
(1) You should restore to original SBF 4.1.26 then update and follow 3.5 version update instruction
(2) I'm not yet trying it, pls wait others
Thank you man
What about the second question?
There's a great version of IGo for Android. It hasn't been skinned for the Atrix, though
Related
Hi all
I'm a complete newbie to the Android, but in the four weeks I've had the HTC Hero, I've set up email, downloaded loads of apps etc, but I've started to notice some problems.
I was advised to upgrade from Android 1.5 to Android 1.6 ahead of the upcoming release of 2.1, but I want to backup all my apps, email settings, messages, etc. so I don't have to start again after the upgrade.
I've been reading through the forums for a few days, and can't find a simple guide. I've found a lot about "root" but nothing about what root is! (As I said, I'm a complete newbie)
Any chance someone could post an idiots guide?
Many thanks
You know...The problem doesn't even exist!! Are you happier than before huh? ...Why? What? Didn't you know? F***ing HTC won't release ANY 2.1 update for our Heroes until 26th of April! Oh sure, you could upgrade to 1.6 but....NO! You can't! Because HTC has decided that 1.6 upgrade will never be released! Oooorrr...You could read some guide about "rooting" your Hero and installing a custom rom This is the best and quickest way to get 2.1 features without waiting for official HTC upgrade. Even because when the new firmware will be released maybe there won't be the possibility of rooting again the phone! So you're forced to use stock rom! And if you don't like it...Well...go to hell! XD (By HTC, not by me obviously...). I can only suggest you some "short" readings and a particular 2.1 rom:
http://en.wikipedia.org/wiki/Superuser (aka root user)
http://forum.xda-developers.com/showthread.php?t=654030 (The most stable and fastest 2.1 rom at the moment)
http://forum.xda-developers.com/showthread.php?t=561124 (The most powerful and friendly modded recovery)
So read, read and read! Then, when you think you're ready, try to root your Hero, if you're not able to do it maybe you've got a perfect SPL...But this is another story...
Oh..and (google)search, (google)search, (google)search //A sort of casting....
+1 MARDURHACK.
A few more things here,...
Have a read of What Can I Do With Root - INFO
Then check out [Guide] Newbie Guide to Install a Custom Rom
....Then when you get to the bit about installing your custom ROM, use the link that MARDURHACK provided if you want to try out a 2.1 ROM. Or you can have a look at the other ROMs available in the development section here at XDA.
I had my Hero for about 3 weeks but wanted a 100% stable ROM, so have opted for the MODACO 3.2 ROM. It is Android 1.5, not 2.1. You can get that from HTC Hero section @ MoDaCo.com
.... I can confirm, its the dogs bollocks!
Hi all
I have recently bought myself a HTC Hero / T-Mobile G2 which I have been wanting to get for ages, I bought it from Ebay and it came with Firmware version 2.1-update 1 which I understand is Froyo?
Anyhow I was wondering if someone might be kind enough to point me in the right direction of how to root my phone, I have tried searching but the amount of entries are overwhelming and to be honest I am not sure where to start. My ultimate goal is to have it rooted and then have the ability to have apps installed to the memory card...
Also once rooted what is the best 2.1 rom to flash the phone with?
Thanks for any help in advance, it is very much appreciated!
Kris
Android 2.1 isn't Froyo - Froyo is android 2.2.
Check out this software universal androot and use that. Though there isn't a documented guide (that i know of).
My sig has a newbie guide which might work on 2.1 (unconfirmed) which you could try. If not you need to wait for http://villainrom.co.uk/ to bring back their 2.1 root guide and use that.
Thank you for your help
I am now on VillainROM 12 and am loving it!
Thanks once again...
Just so you (and others) know. I've now updated my guide to be super quick and it uses Universal Androot now too. Finally a documented method to root which uses this program.
Despite all the excellent work by Steve & the other boffins here in this forum, I continued to experience instability (a few random resets & freezes daily) on 1.5.x
I guess stability is more important than flexibility for me atm, so I'm thinking to install the official Dell 2.2 as I hope it will put an end to my woes.
Grateful if somebody could please advise me the procedure to go about the downgrade and where to find the official 2.2 package I will need. Do I have to downgrade my BB too? If so to what version?
(I originally went from stock O2 1.6 to 2.1 then to 1.5.1)
Thanks for your input.
Current status: O2 unlocked Streak running DJ_Steves V 1.5.3, baseband GAUSB1A131800-EU
Flash stock recovery then upadte stock 318
Sent from the Iphone Killer
Just to ensure I understand correctly, borijess, you saying I should flash this first: http://forum.xda-developers.com/showthread.php?t=840326
.....which will then enable me to go straight from where I am now to 318 ?
Edit: Nevermind, after some intense googling I found a step-by-step guide of exactly what I'm after right here: http://forum.pocketables.net/showthread.php?t=8285.
Thanks again borijess for having pointed me in the right direction - I wouldn't have known what to search for.
Not Android Development
Moving to General
I've been playing around a lot with the gtablet today. It came with the stock firmware and then I updated it to 3588 OTA. Afterwards I tried several roms, and ended up with a brick (magic value mismatch error), and used NVFlash to go back to stock rom.
Once I had the stock rom on I wasn't able to upgrade to 3588 OTA because I kept getting an error once it would try installing it. I tried to manually put 3588 on, and it partially worked, but I got some sort of error about installing the bootloader, but 3588 still loaded up and worked fine. So then I went ahead and installed one of the custom roms.
So my question is... how do I find out what bootloader version I have installed right now? I played around quite a bit with trying lots of stuff out, so I want to make sure I have the most recent version running.
Thanks!
finally found it
From roebeet on another forum
to check which branch you are on: Go to Settings -- About Tablet -- Tapu UI Version. If your firmware starts with "1.1", then you are on the 1.1 (old) branch. If your firmware starts with "1.2", then you are on the 1.2 (new) branch. Also an obvious difference between the two is that the 1.2 branch adds a lockscreen to the tablet.
the only way to be on 1.2 is to flash to it intentionally. 4349 was an OTA that did it automatically, but that update has been pulled. So, unless you've flashed to 4349 stock, you are on 1.1.
Newbe - want to try different Roms
qgirene said:
From roebeet on another forum
to check which branch you are on: Go to Settings -- About Tablet -- Tapu UI Version. If your firmware starts with "1.1", then you are on the 1.1 (old) branch. If your firmware starts with "1.2", then you are on the 1.2 (new) branch. Also an obvious difference between the two is that the 1.2 branch adds a lockscreen to the tablet.
Click to expand...
Click to collapse
I'm a very new user to GTab and android, I've been learning so I'm sorry if my question(s) have been answer elsewhere.
1. Thanks for the info on where to find out which bootloader. This really help, I had the same question as I'm trying to try other custom ROMS.
2. When I first got my GTab (by the way, I love it) I try to install TnT Lite 4.2.4 with no luck, so I install Vegan Tab Gingerbread edition and I had to reflash while trying to install TnT Lite again and got the Harmony edition of Gingerbread (not even sure if it is the same one, Newbe for you ). Now I have lock screen on it. According to your post that should be 1.2. bootloader. So, installing Vegan Tab 7 Harmony updated my bootloader I guess.. is that true??
3. Now I want to try CM7 with overclock Kernel, can someone give some feedback?? or should I just want for Beta of Honeycomb "Bottle of Smoke"??
Thanks all
SkyDragon8 said:
2. When I first got my GTab (by the way, I love it) I try to install TnT Lite 4.2.4 with no luck, so I install Vegan Tab Gingerbread edition and I had to reflash while trying to install TnT Lite again and got the Harmony edition of Gingerbread (not even sure if it is the same one, Newbe for you ). Now I have lock screen on it. According to your post that should be 1.2. bootloader. So, installing Vegan Tab 7 Harmony updated my bootloader I guess.. is that true??
Click to expand...
Click to collapse
I believe there is a lock screen on most ROMs whether they're 1.1 or 1.2. The obvious way to determine which version of *stock* you're on is whether or not it has a lock screen. 1.1 doesn't but 1.2 does.
The only 1.2 ROMs I'm aware of are:
Stock 4349
Brilliant Corners (what I use)
Century Eyes
Mountain Laurel
Beasty
Honeycomb (alpha build)
Thanks
Thanks for the information. I will check my G Tab when I get home tonight and look for it in the "About Tablet" in Setting..
Hallo to everyone.
I have Samsung i7500 and I want to update android version from 1.5 to 2.2,but I don't know how to do it and what I need to do that.Please,can someone help me where to find good tutorial and all what I need to update OS.
You will need to root your device, http://www.drakaz.com/forum/viewtopic.php?id=344
install recovery http://www.drakaz.com/forum/viewtopic.php?id=680
And choose the best rom for you .
And install it http://code.google.com/p/gaosp/wiki/PublicBeta
If you want froyo build use gaosp 2 beta 3.
If you want gingerbread use gingerbread nightly build.
Thanks
Thanks. Just installed it. (gingerbread)
It was a hassle though: SDCard wasn't accessible on Windows 7 machine. Worked on XP.
Now googling how to get my market to work.