hi hello frnz plz help me out...i am not much used to flashig....i managed to install CM6.1.3 on my xperia...i want to try TripNMiUI froyo,...my bb is 54.....i jus want to knw how..to run trips rom without rmoving wofbrks rom.....i mean not backing up..bt can i get an option like boot frm any of the two
Nope dual boot is not possible for now, the only way is backing up that you yourself mentioned
Just backup both roms with xrecovery and you can easily switch between roms by restoring in less than 5 min.
That WOULD be an awesome feature to have. But yes unfortunately, as mentioned, your going to have to back up and restore. Which shouldn't be too complicated.
DooMLorD is working on something of this sort of stuff.
basically dual boot manager.
Definetly cant wait for this feature
k thnk u guys fo ya reply.....so lets wait n c...if some devs come up with tat awesome feature......n tat will make our xperia..a BOMB....xperia roXXX...:-D
Hi, if i backup wolfbreaks rom when my x10 is on baseband .54 but after that i flash my baseband to .52 and then trips rom, when i restore wolfbreak's rom, do i need to reflash the baseband to .54 again?
darkvalance said:
Hi, if i backup wolfbreaks rom when my x10 is on baseband .54 but after that i flash my baseband to .52 and then trips rom, when i restore wolfbreak's rom, do i need to reflash the baseband to .54 again?
Click to expand...
Click to collapse
yes.......
To avoid flashing each time you should just install trips rom and then use the bbpatch to fix it... or wait a few days as trips rom is almost on unified baseband... which means it can be installed on any.... hope this helps
Sent from my X10i TripNMiUI-IRIS
Related
I have no problem with using the flashtool, downloading the sin file, etc. But the step that says DO NOT let it boot and immediately go into xrecovery is what worries me. I love trying all the new ROMs, but am still always go back to a custom 2.1 because of the cam/videocam, plus no stereo bluetooth dropouts.
My question is, after I do this to update the baseband and flash 2.2 Beta 4 via xrecovery. Can I go back to my old custom 2.1 with older baseband via xrecovery and then switch back and forth via xrecovery afterward? I just don't feel like flashing the entire firmware, rooting, adding JIT v2, then removing all of the SE apps AGAIN for like the 10th time.
u can install any rom on .435 firmware..
u cant install beta 4 on any lower firmware(.24,etc)..
so update to .435 and stay..
happy flashing
sumeshd said:
u can install any rom on .435 firmware..
u cant install beta 4 on any lower firmware(.24,etc)..
so update to .435 and stay..
happy flashing
Click to expand...
Click to collapse
Im not entirely sure thats true because it seemed that those with the newer baseband seemed to be having issues with other roms prior to z's beta 4... can someone confirm?
Sent from my X10i using XDA App
its mentioned clearly in z's post about using the latest base band. as for Steve's recommendation of not letting it boot, i guess i must have missed it when i upgraded the base band while on 2.1 customised, but the only worst thing that happened was i didn't got any signal on my phone, everything else worked fine, it didn't mattered coz i was to install free x10 v4. and its a fine job done by z. the ROM is great. add green glow theme on it, and nothing's like it.
about xrecovery backup able to change your base band back with restore, i haven't tried it myself, i guess xrecovery devs will be the best guys to check if you're not sure.
Sent from my X10i using Tapatalk
hi,
ok here's the deal i hav an xperia runnin on this:
http://forum.xda-developers.com/showthread.php?t=900441
and and on bb 52...
but i hav been looking around all over xda and cannot seem to find a general method of bootin custom kernels... i really want to use the lastest custom kernel for my xperia to use droidwall...
i hav managed to do most of it.. that a custom rom and flash a bb (52) no probs.. but this doesnt seem to work pleezz help..
http://forum.xda-developers.com/showthread.php?t=1055930
Sent from my X10 TripNMiUI using XDA Premium App
joseph_pires said:
hi,
ok here's the deal i hav an xperia runnin on this:
http://forum.xda-developers.com/showthread.php?t=900441
and and on bb 52...
but i hav been looking around all over xda and cannot seem to find a general method of bootin custom kernels... i really want to use the lastest custom kernel for my xperia to use droidwall...
i hav managed to do most of it.. that a custom rom and flash a bb (52) no probs.. but this doesnt seem to work pleezz help..
Click to expand...
Click to collapse
Droidwall is not yet possible on our x10 due to kernel issue, booting a custom kernel is easy, flash the older miniloader on the page mentioned before, and boot custom kernel. I personally will not use custom kernels as it drains battery and makes not much difference compared to stock kernel which would be more stable.
I just updated my X10i by sending it to SE Service centre they have installed
Android Version
2.3.3
Baseband
2.1.71
Kernel Version
2.6.29-00054-g5f01537
[email protected]#1
Build number
3.0.1.g.0.75
However this rom is not getting rooted
i tried x10 flash tool
2.9.1
3.0.0
superoneclick 1.5.5/1.9.1/2.1.1
nuthing work and this sounds so challengin
guys need yur help
You can't root 2.3.3 bt superone click or flashtool.
usethis guide
http://forum.xda-developers.com/showthread.php?t=1196421
read whole guide first.
ya.. just follow the whole guide. i've been tried it out for at least 4 times. everything goes well at the moment. btw, u want root ur phone for wat purpose?
wello168 said:
ya.. just follow the whole guide. i've been tried it out for at least 4 times. everything goes well at the moment. btw, u want root ur phone for wat purpose?
Click to expand...
Click to collapse
dude m bored wid the stock rom..im looking out for is nice stable rom wid loads of performance and good batt life
YRUZ89 said:
dude m bored wid the stock rom..im looking out for is nice stable rom wid loads of performance and good batt life
Click to expand...
Click to collapse
well, there are plenty of roms out there.go find in development section.
i personally like WolfBreak's v6 stock 2.3.3 rom.good batt life.
Did you downgrade the kernal when you tried to root with flashtool? you have to downgrade the kernal then root with flashtool the upgrade the kernal after you root.
Hi. I have some doubts about this, I wanna try the last rom by nAa, and it ask for a unlock bootloader and nAa Kernel, my quiestion is: After doing that is there any way for getting back to the original kernel, I mean PC companion will work? and restore it like factory?
Thx!
Don't worry, you can flash anytime back to stock kernel, witch is here http://forum.xda-developers.com/showthread.php?t=1403808
Thnx, but I meant Mini pro u20...
Btw, if I have a Backup with Minicm7 by paul in cwm with stock kernel, if then I flash Naa kernel, if I restore the backup I had, it comes with the stock kernel??
No. CMW backups the ROM and its data. To revert back to stock kernel you just have to DL a stock kernel file from the site and flash it.
And the bootloader re-lock?
What are the benefits for having an unlocked bootloader, using a rom in stock kernel...
If you're using stock kernel and dont plan on using a custom kernel, there's no benefit.
The whole purpose of unlocking BL is to be able to flash a custom kernel. there are pretty whack custom kernels around which, naturally, are better than stock.
So, what are the benefits of using Custom Kernel?
My x10 mini pro is running paul-xxx's miniCM7pro version 17, and the result I got from S1tool were: SEMC SIMLOCK CERTIFICATE (that means I can unlock it right?). My question is can I continue the unlocking process, or do I need to downgrade my phone first to stock firmware?
I'm doing this for my brother so I haven't been much on this sub-forum.
Thanks
I was like you, in the cm7 by paul, I flashed normally with no downgrading....
Just do it...!!
icerebro said:
I was like you, in the cm7 by paul, I flashed normally with no downgrading....
Just do it...!!
Click to expand...
Click to collapse
Thank you, it worked very well! Installed the last kernel and rom by nAa and the phone is way faster than before. I bet my brother is more happy with his phone now!
Sent from my u8800 using XDA App
Yeah, the rom is very fast, and no mor se logo in thee boot...hahaha nice job.
Sent from my U20i using XDA App
icerebro said:
So, what are the benefits of using Custom Kernel?
Click to expand...
Click to collapse
Depends on the kernel you're using. NAa's is the best one out there. Zombie panic is at par with it. Tonnes of features with outstanding speed and stability.
But i guess you're aware of it now
Hi everyone!
I'm tired using custom roms for their instability and fc's everywhere for over a year I didnt found Rom that works perfect all the time with many apps installed so I just want to my phone work, dont want to flash new system every month again.
I was running stock with deleted apps, Set Cpu (tnx to gregbradley (edit: that was neoxx3m very good advidce, sorry my bad) and z-kernel for about 4 months and I was happy, that was one and only Rom that i've used so long. Yes it wasnt so fast but it was very stable and everything works so nice not even one fc. (kindda wierd couse ive installed z-kerner on my Unlocked BL x10 and now I can't and dont wanna to play and relock)
So i wanna repair my phone and get back to stock, root it, delete all uneeded apps and flash the most stable kernel so will it be failsafe from doom right?
And the question is will my plan work? I know that phone will not be so fast but will everything work and this is all I need or maybe someone has better idea?
Also have some questions about the newest fw for this Doom UB kernel. Where do i get this newest se fw?
Any help will be very appriciated.
Restore the phone back to stock using SEUS. That should do the trick
Sent from my X10i using xda premium
Last few ROMS Ive installed from scratch. So repair, root, etc I've even format sd card everythime i flash new rom. The question is:
Will doomkernel work on stock rom repaired in pc companion?
Will it be stable?
DoomKernel is stable on stock unlocked BL, but u have few version. X, S and one more i think. Look at his thread an try it.
Sent from my "z10i"
Have to try but Doom writes thet this kernel is for NEWEST SE FIRMWARE, will it work on stock just repaired in pc companion?
Someone made the topic that He was tring to flash this newest firmware (3.x.x.x) and ended with no boot and anything could help him
I was running stock with deleted apps, Set Cpu (tnx to gregbradley advidce) (...) and I was happy,
Click to expand...
Click to collapse
Of course that was your your advice neoxx3m sorry
netox187 said:
Have to try but Doom writes thet this kernel is for NEWEST SE FIRMWARE, will it work on stock just repaired in pc companion?
Click to expand...
Click to collapse
It will work because when u repair ur phone via PCC u get latest firmware (2.3.3/3.x.x.x.x.x), but my advice is to try relock BL and use zKernel, i did that yesterday and i'm happy again!
Sent from my "z10i"
I told you that dont wanna play with bootloader no more, maybe for some time i would like to try some kernel or rom (if im not happy for using stock and doom) and will have to unlock again so im patience (tring to) and will not to this for a while.
Anyway strange is that i flash zKernel even if i had unlocked Bootloader and it work fine but when i tried to do this again ( didnt know that this kernel is fo Locked only) it didnt work