Related
Hello,
i just want to ask if maybe one of the admins could contact the developers of HSPL, because there are many who bricked their devices because of SPL 3.03. Or maybe one of the developers themselves will read this. HSPL is the last way out in most cases (or finding somebody with a ORT JTAG Tool).
I know that you better should not update a device without collecting information before it. Indeed!
My last phone was a iPhone, so I know what I´m talking ´bout, but sometimes it just happens that you might have skipped any important information or hint.
So please help :/
You bricked your device? wow!
May be you are just stick on the boot screen where it says SPL 3.03, because you tryed to flash a ROM from the SD card that is not for your operator?
Well, if this is the case just flash an older official ROM for your operator, again from the SD card. Than you can use the actual HSPL and flash a custom ROM. That fixed it for me.
idimdim said:
You bricked your device? wow!
May be you are just stick on the boot screen where it says SPL 3.03, because you tryed to flash a ROM from the SD card that is not for your operator?
Well, if this is the case just flash an older official ROM for your operator, again from the SD card. Than you can use the actual HSPL and flash a custom ROM. That fixed it for me.
Click to expand...
Click to collapse
of course i already tried that, does not work.
You are not clear.
Can you get your device to boot loader?
If yes, then you can try Gold card method from there.
yes that still works, but i tried goldcard method today (1 time with the rom which bricked my device und with a custom rom and the original orange rom [my hd2 has a orange branding]) and it was not the solution for my problem :/
edit: oh and if it´s of interest: when trying to flash with goldcard method the rom which bricked it, i get the white screen with "Loading..." in the middle and then it says "Not allow" also on a white screen and "0028002" written in red, then gets back to bootscreen.
well since u can get to ur bootloader consider urself lucky it aint bricked..
Do one thing, get the newest stock rom from htc (same spl 3.03) and make sure its the right one for your device(when you enter your serial no. it should accept and give u a download link).
then try flashing that rom..
It should get you up and running.
After that you can start worrying about getting back to the old spl and/or hardspl
New HSPL
I am stuck with the same thing.
If i could only geat a new HSPL for spl 3.03.0000
[email protected] said:
I am stuck with the same thing.
If i could only geat a new HSPL for spl 3.03.0000
Click to expand...
Click to collapse
Try flashing an older stock Rom one that is covered by hspl via SD card method. Then whenever you like to install that latest 3. 14 Rom do it via usb method.
jjblaster3 said:
Do one thing, get the newest stock rom from htc (same spl 3.03) and make sure its the right one for your device(when you enter your serial no. it should accept and give u a download link).
then try flashing that rom..
Click to expand...
Click to collapse
that´s exactly where my problem is...
my HD2 has a orange branding and is from france. i downloaded a rom from a link somewhere in xda threads, but it´s a really old rom version. the idiots of orange support posted me a link to the touch hd rom^^, so i even don´t know if there is a rom out there.
dunno if it would help posting my serial here...
i tried to decrypt it for finding information about my model, but the only information i can get is the day of production by the first few numbers and letters :/
OlDirty89 said:
that´s exactly where my problem is...
my HD2 has a orange branding and is from france. i downloaded a rom from a link somewhere in xda threads, but it´s a really old rom version. the idiots of orange support posted me a link to the touch hd rom^^, so i even don´t know if there is a rom out there.
dunno if it would help posting my serial here...
i tried to decrypt it for finding information about my model, but the only information i can get is the day of production by the first few numbers and letters :/
Click to expand...
Click to collapse
You might want to look into the download.. if it's an MFG SPL you're stuck with it
Can you provide the link please?
So from what I understand, OlDirty89 failed to read the fine print and is now in possession of an un-usable phone.
I remember when XDA was actually a community where users like this could actually get help when faced with a situation like this...
EX> I was a noob once. My first PPC was a WM5 HTC Wizard/aka/T-Mobile MDA. I actually stumbled across this forum by accident looking for cool new apps for my phone since lets face it.. WM5 is very bland. I saw what I thought was the coolest thing I'd ever seen - a complete OS replacement loaded with new features I'd never seen on a phone before and sure enough, without reading, I downloaded and attempted to flash the ROM. Naturally, it failed and I panicked. I had paid just over $300 for the phone after all.. I came back to this site, opened a new thread titled "PLEASE HELP ME!!" and within an hour, the more seasoned users on this site helped me restore my phone to the factory state and guided me in the right direction, teaching me everything I could have ever wanted to know about WM and how to customize it. I did eventually get that cool custom ROM on my Wizard and became an established member of the community.
^^^^ This is why I absolutely CANNOT STAND flamers... Flaming a user for being less knowledgeable than you is just plain pathetic... Shows what you're like on the other end of the keyboard too... You know it was really funny because I stumbled across a statistic once that stated that 60% of users who join these forums and flame other users are overweight virgins living with their parents... Just thought that was a funny statistic worth mentioning...
Now with all of that being said.. Let's help this guy. He clearly needs it else he wouldn't have posted this thread asking for it. I'm not saying that someone should write a step-by-step tutorial right here in this thread telling him exactly how to undo what he's done, just guide him in the right direction...
This speech really reminds me of a movie I saw not too long ago...
"Pay it forward..."
Just my 2 cents...
dharvey4651 said:
So from what I understand, OlDirty89 failed to read the fine print and is now in possession of an un-usable phone.
I remember when XDA was actually a community where users like this could actually get help when faced with a situation like this...
EX> I was a noob once. My first PPC was a WM5 HTC Wizard/aka/T-Mobile MDA. I actually stumbled across this forum by accident looking for cool new apps for my phone since lets face it.. WM5 is very bland. I saw what I thought was the coolest thing I'd ever seen - a complete OS replacement loaded with new features I'd never seen on a phone before and sure enough, without reading, I downloaded and attempted to flash the ROM. Naturally, it failed and I panicked. I had paid just over $300 for the phone after all.. I came back to this site, opened a new thread titled "PLEASE HELP ME!!" and within an hour, the more seasoned users on this site helped me restore my phone to the factory state and guided me in the right direction, teaching me everything I could have ever wanted to know about WM and how to customize it. I did eventually get that cool custom ROM on my Wizard and became an established member of the community.
^^^^ This is why I absolutely CANNOT STAND flamers... Flaming a user for being less knowledgeable than you is just plain pathetic... Shows what you're like on the other end of the keyboard too... You know it was really funny because I stumbled across a statistic once that stated that 60% of users who join these forums and flame other users are overweight virgins living with their parents... Just thought that was a funny statistic worth mentioning...
Now with all of that being said.. Let's help this guy. He clearly needs it else he wouldn't have posted this thread asking for it. I'm not saying that someone should write a step-by-step tutorial right here in this thread telling him exactly how to undo what he's done, just guide him in the right direction...
This speech really reminds me of a movie I saw not too long ago...
"Pay it forward..."
Just my 2 cents...
Click to expand...
Click to collapse
Great post
But I hate to say, unless we can get some powerful brainstorming goin on and figure out how to drop an engineering SPL (MFG) with mtty I don't think we can help..
I started a thread a little while back -- Stuck with SPL 2.02.0000 - Test ROM? that you might wanna read through to understand your situation a little better.
And just fyi, you can play/flash between 2.02 and 2.03 without problems, just DON'T try flashing 2.01 from those two.. left me with a lovely little brick.
(this is only if you flashed the 2.03 from this thread)
OlDirty89 said:
that´s exactly where my problem is...
my HD2 has a orange branding and is from france. i downloaded a rom from a link somewhere in xda threads, but it´s a really old rom version. the idiots of orange support posted me a link to the touch hd rom^^, so i even don´t know if there is a rom out there.
dunno if it would help posting my serial here...
i tried to decrypt it for finding information about my model, but the only information i can get is the day of production by the first few numbers and letters :/
Click to expand...
Click to collapse
Use SSPL and it will install your Custom or Stock ROM without any problem.
Download from here http://forum.xda-developers.com/attachment.php?attachmentid=260802&d=1261873816
OlDirty89 said:
of course i already tried that, does not work.
Click to expand...
Click to collapse
IT WORKS! I am also with Orange France and had no issue in reverting back by flashing the latest Orange FR original rom from the SD card.
You can get it here:
http://www.megaupload.com/?d=B9HDHTMW
Then open with winrar or other archiver and extract the ruu_signed.nbh. Rename it to LEOIMG.nbh, and flash it from the SD card.
Scabes24 said:
You might want to look into the download.. if it's an MFG SPL you're stuck with it
Can you provide the link please?
Click to expand...
Click to collapse
http://www.megaupload.com/?d=BC4FGYH4
it´s 1.43
dharvey4651 said:
So from what I understand, OlDirty89 failed to read the fine print and is now in possession of an un-usable phone.
I remember when XDA was actually a community where users like this could actually get help when faced with a situation like this...
EX> I was a noob once. My first PPC was a WM5 HTC Wizard/aka/T-Mobile MDA. I actually stumbled across this forum by accident looking for cool new apps for my phone since lets face it.. WM5 is very bland. I saw what I thought was the coolest thing I'd ever seen - a complete OS replacement loaded with new features I'd never seen on a phone before and sure enough, without reading, I downloaded and attempted to flash the ROM. Naturally, it failed and I panicked. I had paid just over $300 for the phone after all.. I came back to this site, opened a new thread titled "PLEASE HELP ME!!" and within an hour, the more seasoned users on this site helped me restore my phone to the factory state and guided me in the right direction, teaching me everything I could have ever wanted to know about WM and how to customize it. I did eventually get that cool custom ROM on my Wizard and became an established member of the community.
^^^^ This is why I absolutely CANNOT STAND flamers... Flaming a user for being less knowledgeable than you is just plain pathetic... Shows what you're like on the other end of the keyboard too... You know it was really funny because I stumbled across a statistic once that stated that 60% of users who join these forums and flame other users are overweight virgins living with their parents... Just thought that was a funny statistic worth mentioning...
Now with all of that being said.. Let's help this guy. He clearly needs it else he wouldn't have posted this thread asking for it. I'm not saying that someone should write a step-by-step tutorial right here in this thread telling him exactly how to undo what he's done, just guide him in the right direction...
This speech really reminds me of a movie I saw not too long ago...
"Pay it forward..."
Just my 2 cents...
Click to expand...
Click to collapse
thanks for that. we could not be a specialist in everything
netvpn7 said:
Use SSPL and it will install your Custom or Stock ROM without any problem.
Download from here http://forum.xda-developers.com/attachment.php?attachmentid=260802&d=1261873816
Click to expand...
Click to collapse
SSPL does not work on my device at the moment.
idimdim said:
IT WORKS! I am also with Orange France and had no issue in reverting back by flashing the latest Orange FR original rom from the SD card.
You can get it here:
http://www.megaupload.com/?d=B9HDHTMW
Then open with winrar or other archiver and extract the ruu_signed.nbh. Rename it to LEOIMG.nbh, and flash it from the SD card.
Click to expand...
Click to collapse
i´m trying that right now (download is active)
idimdim said:
IT WORKS! I am also with Orange France and had no issue in reverting back by flashing the latest Orange FR original rom from the SD card.
You can get it here:
http://www.megaupload.com/?d=B9HDHTMW
Then open with winrar or other archiver and extract the ruu_signed.nbh. Rename it to LEOIMG.nbh, and flash it from the SD card.
Click to expand...
Click to collapse
Downloading ...
looks like I am also stuck on bootloader with SPl 3.03,nothing I did helped so far,I had HSPL3,my stock Rom was 166.707.
any help is greatly appreciated.
OlDirty89 said:
Hello,
i just want to ask if maybe one of the admins could contact the developers of HSPL, because there are many who bricked their devices because of SPL 3.03. Or maybe one of the developers themselves will read this. HSPL is the last way out in most cases (or finding somebody with a ORT JTAG Tool).
I know that you better should not update a device without collecting information before it. Indeed!
My last phone was a iPhone, so I know what I´m talking ´bout, but sometimes it just happens that you might have skipped any important information or hint.
So please help :/
Click to expand...
Click to collapse
I experienced same things after return my phone for screen problem. Orange france gave me a new one and then my problem began. I made all the needed steps to flash a new radio and Artemis ROM and my phone became crazy. Radio failed at 99%, random soft reset etc... By chance there is a new version (1.72) on the website of orange. With HSPL2 i managed to downgrade the SPL to 1.66 version and flash with the last official orange ROM.
Frequently, my phone continue to soft reset itself and became crazy. Can't use it on a whole day, without soft reset 10 times. I decided to return it to Orange (SPL, ROM and Radio where the good ones). Received a new one, immediatly flash my phone with artemis V36 and radio 2.10.50_28 and all is ok with this last phone.
Probably problems come from the phone and not the way you try to revert back...
idimdim said:
IT WORKS! I am also with Orange France and had no issue in reverting back by flashing the latest Orange FR original rom from the SD card.
You can get it here:
http://www.megaupload.com/?d=B9HDHTMW
Then open with winrar or other archiver and extract the ruu_signed.nbh. Rename it to LEOIMG.nbh, and flash it from the SD card.
Click to expand...
Click to collapse
omg....great. it worked! i love u guys
i knew i will get help here
jovanoti
Hi, I've got the same problem with my Orange HD2.
I can not find any original older ROM to flash with HSPL.
No any chance to install any different rom than my "French language" ROM which is my exact problem I wanna WWE.
I installed android and it sucks, it reboots all the time, apps are useless, there are of course more things that made me want to switch but i dont want to go into details.
i almost turned my phone into brick when i installed android so i just want a step by step process on how to go back to windows mobile 6.5, and what version is recommended for best performance.
Ok I sugest going back to the stock ROM for your HD2 as you can flash it via SD card anx make everything stock with ome flash. But if you want to go with a custom ROM I suvedt any oc the Energy ROMs they are great. You can flash either of the ROMs via SD card or just put your HD2 into bootloader and wait for Serial to change to USB in the white bar of bootloader and then flash the ROM of your choice. If you flash via USB with official ROM it willnot revert your HSPL to SPL bit via SD card it will. Here is a link to tbe thread on how to flash via SD card.
http://forum.xda-developers.com/showthread.php?t=681317
ok, so i understand that i put the downloaded ROM to my HTC's SD card, hard reset the phone, and do the rest of the steps from the lik you sent.
What about radio? when do i flash it and do i need to flash it?
also, which of the hotfile files from the build available here
http://forum.xda-developers.com/showthread.php?t=591784
is the "energy" theme? (the first one from the list in post 2)
when i click on the link it sends me to cookie's home tab thread.
piotrek255 said:
ok, so i understand that i put the downloaded ROM to my HTC's SD card, hard reset the phone, and do the rest of the steps from the lik you sent.
What about radio? when do i flash it and do i need to flash it?
also, which of the hotfile files from the build available here
http://forum.xda-developers.com/showthread.php?t=591784
is the "energy" theme? (the first one from the list in post 2)
when i click on the link it sends me to cookie's home tab thread.
Click to expand...
Click to collapse
Fist off make sure not to confuss putting your HD2 into bootloader and preforming a manual hard reset. To hard reset you have to power on and hold both volume down and up buttons down and the tricolored bootloader will appear for a brief secound but then another screen with instructions will appear. To put it into bootloader just power on holding down the volume down button and you will get tbe bootloader.
Flash the radio you want either before or after you flash the ROM. It really does not matter wich it will still preform it's function the same. I suggest radio version 2.15.50.14 as it is the latest radio version. You don't just have to flash another radio though if you don't want to. I say if you are not having problems with your current reception then your current radio should do fine. You can flash the radio tbe exact same way as the ROM using your SD card. Just rename the .nbh file for the radio to leoimg.nbh and copy it to your SD card. Or you can flash it via USB cable and your computer by using bootloader.
I checked out the link you posted. To download the zip file for the ROM you have to lick on the appropriate download link with the flag that applies to you. Let the page fully load when you go to the first page of the thread and look for the download button links toward the bottom of post #2. You will have two zip files to choose from I would say go with the largest of the two files as it will probably be the one with the start button at the bottom of the screen. I can not be certain of this though as I have a TMOUS HD2 and can not flash the ROM to check.
thanks for the reply, but i turned my phone to a brick yesterday before i read your post, turned out i didnt install HSLP (or something like that) which you need for installing new roms... immediately i went to a shop to get it fixed and luckily they had software that erased everything and installed original software
Glad you got your HD2 up and running again. I was wondering though if you checked to see if you could still get the bootloader to come up by holding down the volume down button down while powering on? Reason why I ask is you said.
they had software that erased everything and installed original software
Click to expand...
Click to collapse
I think when you flashed the custom ROM with out HSPL it ran a task 28(it is some debate wich is bett3er task 28 or task 29) before trying to flash the ROM which removed the current ROM from your HD2 leaving it ROM less. If your HD2 was truly bricked the place you brought it to would have had to disassemble your HD2 to get the main board out so they could use a JTAG on it. For that is the only way to revive a truly bricked HD2. So you see I am afraid you paid someone for something you could have done yourself. But the whole point was to get your HD2 up and running again so it is probably worth it to you. Peace
i've read what needed to be done in my sitation, and i ran into a big guide with some info about a program i needed to have fo 30 euro, it was then when i decided to go with the shop.
i had a RGB screen with some info on it, but i dont remember what it was, i'm just glad i got it fixed.
what free procedure have you had in mind?
Get HSPL back on it, Follow Energy ROM recomendations regarding radio version & get 23699 ROM Dinik from ROM repository.
With a few aditional registry tweaks this is one of the best performing ROMs put together.
My HD2 runs supurb on this ROM with over 40 aditional softwares loaded & used daily for work & leasure.
Simply blows a stock ROM away & makes Android only a SD card loaded plaything.
piotrek255 said:
I installed android and it sucks, it reboots all the time, apps are useless, there are of course more things that made me want to switch but i dont want to go into details.
i almost turned my phone into brick when i installed android so i just want a step by step process on how to go back to windows mobile 6.5, and what version is recommended for best performance.
Click to expand...
Click to collapse
2 ways mate:
1. enter bootloader (press and hold volume down then briefly press power menu)
and flash a custom ROM
2. if you follow other peoples advice here of flashing a stock ROM via sdcard,
you will loose HSPL. or you can just flash a stock ROM via USB method and
keep HSPL on your device.
I personally recommend step 1.
piotrek255 said:
i've read what needed to be done in my sitation, and i ran into a big guide with some info about a program i needed to have fo 30 euro, it was then when i decided to go with the shop.
i had a RGB screen with some info on it, but i dont remember what it was, i'm just glad i got it fixed.
what free procedure have you had in mind?
Click to expand...
Click to collapse
What I was refering to in my other post is this. I feel like the shop probably just ran a task 29 (Google task 29 for HTC HD2) and then just flashed the stock ROM for your HD2 Wich can be downloaded for free from XDA, HTC.com, and probably your carriers website. These are all things you can do yourself. But like I said if the shop had to take your HD2 apart you did theright thing.
eh, i think they run the thing you said, so i am like 40$ lost on this... this solution should be easier to find, i searched google and xda for the problem i ran into, i typed different keywords, searched for an hour and found only some big guide with one of the steps requiring to buy a software for 20 euro. This forum should be better organized when it comes to HTC errors. Some screens and direct links to solutions.
piotrek255 said:
eh, i think they run the thing you said, so i am like 40$ lost on this... this solution should be easier to find, i searched google and xda for the problem i ran into, i typed different keywords, searched for an hour and found only some big guide with one of the steps requiring to buy a software for 20 euro. This forum should be better organized when it comes to HTC errors. Some screens and direct links to solutions.
Click to expand...
Click to collapse
Just an humble suggestion, users should read "stickies" before they do something to their device.
Almost all of guides, video, tutorial or references links are stickied at the beginning of the the forum/subforums
cheers
I had Magloader and WP7 in it. As time went by I upgraded to HD7 and never looked back. It's been a while since I have touched XDA and WM6.5.
My assumption is that even with Magloader, you only have to flash your stock ROM and it'll revert back to WM.
Mine won't go on and I suspect that I flashed a Non-Tmobile compatible ROM. Can someone confirm that this is the case? Here's the ROM string: RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.0 7U_2.04.50_22_2_Ship.exe
I understand completely that if I messed it up then it's messed up. I just wanna make sure there might be other solutions or something I am missing out.
-Thanks in advance!
----------------------------------
Is this a final answer? I need to know if it's bricked and nothing else can be done.
Anyone thinks a shop may be able to recover it back? It won't go on at all..
tictac0566 said:
Sometimes, it´s easier than you think.
You´ve got 2 options to get rid of HSPL. One of those options would be simply described in the original thread of HSPL.exe software. If you would have checked this program a little bit, you would have noticed the very fact that you can select what SPL or HSPL you want to install.
Second, you can flash your stock ROM via SD card method, this will replace HSLP and everything else - this does not work using RUU.exe via USB.
Click to expand...
Click to collapse
By the looks of the radio installed (2.04.50_22_2), I would say that you did brick your T-mobile phone. Take a look at the following thread for a possible solution to unbrick your phone:
http://forum.xda-developers.com/showthread.php?t=668347
Hi thanks for the response Lavell. Would MTTY be able to do anything?
The phone doesn't turn on at all, or it seems.
I've never bricked one before so Idk if this is the way it happens.
its gone. dead. it will need JTAGging or a new mainboard.
that thread wont help, the phone wont power on, and that thread requires you can get into bootloader.
that's a really early rom you used, the tmous didnt even exist when that rom shipped.
If you want to get rid of it let me know please!!!
Hey guys, don't mean to hijack the thread but I got the same problem here.
Had WP7 but could not use 2g so I went back to MAGLDR113 and installed the file below:
RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship
It went all the way to 100% but now the phone is dead. Computer makes a sound when I plug in usb but I have tried changing batteries and all but it doesn't work.
Does anyone know in Dallas or areas around how to do that JTAG thing?
There is no proper documentation on how to go back to stock 6.5 Windows or at least I could not find one
S2K_MoZo said:
There is no proper documentation on how to go back to stock 6.5 Windows or at least I could not find one
Click to expand...
Click to collapse
At its most basic, its the same for ALL hd2's, ,
1 get the correct stock rom for your region&vendor
2 flash it
thats it.
Sadly lots of times this is shortened to
1 get stock rom
2 flash it
and people just assume they can use any stock rom, and since they usually already have HSPL installed, it allows the flash to start, and tmous phones die.
Yeh think the HSPL installer should of had a TMOUS version either blocking known bricking radio & ROMs or just an on screen message warrning & advising on checking before comencing with flash.
At end of the day it is the users fault for not researching or using a TMOUS rom to be 100% safer !
http://dl.htc.com/ruudownload/t-mobileUS/Filedownload.aspx?pid=leo
Hi guys and girls, I have just purchased a HD2 and would like to install android gingerbread (or whatever is easiest and best)... i have read through the how-to threads on here made by tytung - http://forum.xda-developers.com/showthread.php?t=905060 - (including the apparent 'beginners' guide for installing ROMs etc) a million times and being the worlds most useless person with a mobile i just dont have the courage to do it as i dont understand none of the terminology or how to install any of the links etc... could somebody please point me in the direction of a full step-by-step guide for dummies lol
i am currently running on:
flash size: 512mb
OS version: 5.2.21864 (21864.5.0.81)
ROM version: 1.43.405.1 (70124) WWE
ROM date: 10/26/09
Radio version: 2.04.50.22_2
(i believe these are the ones most mentioned in the threads... but mean nothing to me )
i could literally do with the dummies guide with pictures the lot if possible lol.. BUT any help for a so called 'newb' would be very much appreciated.
thanks in advance
Tbh the easiest thing to do is flash hard spl then boot your desired build via SD. Unfortunately I'm on my phone so I can't link but if search the hd2 thread its all there. Also if you Google hd2 android Roms there all in one place and also tell u what type they are nand, SD ect. If I get to my PC later I'll link all the info.
Hope this helps.
Ok here u go all the info u need should be here. May have to paste the URL as im still on my phone.
http://forum.xda-developers.com/showthread.php?t=732380
Sent from my HTC EVO 3D using XDA App
thanks for that... i would like to install the gingerbread android from this thread http://forum.xda-developers.com/showthread.php?t=905060 as this one looks like the newest/most stable version that has everything working..but because my phone has been factory reset and i think i need the correct radio i am not sure where to get that and how to install it onto the phone to even begin...
i am sorry, i know i am a complete hassle but ya know, the phone is expensive and im a newb, dont want to break it ....
(i held the down vol button and switched it on the other day to see what happens and then the phone didnt switch back on for like 5 mins after, it **** me right up lol, need to be totally sure im doing the right things from now on before i give myself a mental breakdown lol)
i do like the layout of that thread thought where its a step-by-step so id know if i were doing the right things
since the phone is stocked what i have downloaded so far is:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe ... can somebody please confirm that this is the correct thing that i need to install first by going to ROMupdateutility.exe!! .. and anything else i need to do for this...
then i have ''DFT_LEO_MAGLDR113_DAF.rar'' downloaded
aswell as ''MAGLDR_CWM_Recovery_v3.2.0.0_for_NexusHD2_135M.zip'' and the ''NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7).zip''
but which HSPL is best to install to do this? and where to download it from? ... on some threads here they say that HSPL4 is the best, but others say that its not fully safe to use? ...
are these the only things that i have to have to install this? and could somebody please put up a quick step-by-step to install it all pleeeeeeeeeeease, i would be eternally grateful lol
Found this mate
The first thing to do is this
After that then follow step 2 and 3 of Installation Guide for MAGLDR 1.13 in the thread you have posted this will give you CWM and the actual ROM.
The first step is the trickiest but you only have to do it the once and then you can get most ROMs flashed. The most important thing is not to interupt any of the processes or you will brick the device. Btw have a look here too
i followed the steps from the first link you sent and installed recovery, magldr etc... but now on the last step when installing the nand android roms i am stuck...the steps are not clear and there are no roms links to download... the phone is in magldr mode now and i dont know what to do from here.... please help
kezman11 said:
i followed the steps from the first link you sent and installed recovery, magldr etc... but now on the last step when installing the nand android roms i am stuck...the steps are not clear and there are no roms links to download... the phone is in magldr mode now and i dont know what to do from here.... please help
Click to expand...
Click to collapse
View the "Detailed guide" section here: http://forum.xda-developers.com/showthread.php?t=893620 (it instructs you on how to flash roms via magldr; ignore the version of magldr mentioned in step 1).
whats happened is that i have put the gingerbread version from the link i posted into the sd root, but there are 3 files (boot, meta and system) but no files to run?????
i forgot to install the ''NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7).zip'' at the beginning to i installed it afterwards as another thread said i could do if i went into the USB mass stg ... but now, with the 3 files, i dont know what to run on my computer to install android :/
kezman11 said:
whats happened is that i have put the gingerbread version from the link i posted into the sd root, but there are 3 files (boot, meta and system) but no files to run?????
Click to expand...
Click to collapse
So follow the instructions given in that rom's post (See "Installation Guide for MAGLDR 1.13" in it's thread: http://forum.xda-developers.com/showthread.php?t=905060).
in the post it says ''Enter ClockworkMod Recovery when you're on MAGLDR 1.13 (hold "Power" button during boot) and select "AD Recovery" or "Boot AD SD" (if ever copied CWM's initrd.gz and zImage to SD).''
when i go to AD Recovery it says ''no boot sources''
when i go to Boot AS SD it says
''andoid load at 11800000
from microSD
load zimage
k: /zimage
SD KERNEL OPEN FAILED''
kezman11 said:
whats happened is that i have put the gingerbread version from the link i posted into the sd root, but there are 3 files (boot, meta and system) but no files to run?????
Click to expand...
Click to collapse
Have you unzipped the file because I believe you place the zip onto your SD still zipped up the flash it using CWM.
Somebody correct me i'm wrong please last thing I booted on my HD2 was via SD and was many months ago.
awww i am beginning to wish i hadnt started ... how do i do that now? i am at the main maglrd screen, when i go to USB mass storage and plug in my usb nothing comes up now either?
if nobody knows please just tell me how to cancel and put it back as it was with windows 6.5 ... thats better than nothing
OK go here and download the file. Unzip it to your desktop boot your handset normally copy the unzipped file to to the root of your SD card then open the folder with your phone and click CLRCAD nothing will happen dont worry then click haret. It should boot be patient as far as I can see it's the same ROM but just in SD format.
how do you run the handset normally now? i am at the magldr screen now and everytime i turn the phone it this screen comes up ...??
kezman11 said:
how do you run the handset normally now? i am at the magldr screen now and everytime i turn the phone it this screen comes up ...??
Click to expand...
Click to collapse
Installing magldr erases your OS, so basically it's the only thing on your device at this point.
RESOLVED !!
Massive thank you to Bebida for helping me to get this working .... the man is a legend !!!
the only issues i have found is that i cant add a new contact.. it goes to sync with email address (for some reason) but then after i fill in the details it still doesnt add ??? dont know whether im doing something wrong or whether theres an issue there !!!
and also every now and again, when i press the apps button it flickers but doesnt come on, but if i leave it a few minutes and then try again, or go into the settings screen it seems to work fine !!!
...
oh and also that the battery seems to be getting eaten rather quickly...whether thats because there alot more going on with the screen now with apps etc i dont know, but im having to order a back up battery i think because i dont have the time to charge up during the day
kezman11 said:
the only issues i have found is that i cant add a new contact.. it goes to sync with email address (for some reason) but then after i fill in the details it still doesnt add ??? dont know whether im doing something wrong or whether theres an issue there !!!
and also every now and again, when i press the apps button it flickers but doesnt come on, but if i leave it a few minutes and then try again, or go into the settings screen it seems to work fine !!!
...
oh and also that the battery seems to be getting eaten rather quickly...whether thats because there alot more going on with the screen now with apps etc i dont know, but im having to order a back up battery i think because i dont have the time to charge up during the day
Click to expand...
Click to collapse
It may be worth going to settings>accounts&sync>google to see if you have auto sync contacts checked if so uncheck and try and add a contact again to see if it is related to that.
My best advise would be to look through the thread where you got the ROM as 9 outa 10 times the issues have been raised and a fix posted.
As for battery it's more than likely you have been hammering the usage and data downloading apps and stuff, I know I do when I flash a new ROM but again check the thread my man.
Which is the best rom to go with?
I've downloaded _n0p_'s DSC v0.7 and Tenorntex's Longhorn 2.1 v2, seeing as these 2 were the newest and latest and had Android 2.3.3
Are there any other better rom's or has anyone tried the 2 I listed, if so whats the difference?
Thanks
Better is very vague when it comes to ROM's it all depends on what you want in a Rom. I have old Simple Streak 1.2. Yes there is newer ROM's out but this one works perfect for what I need. In my Case Stability.
DSC is the most actively developed/supported. Plenty stable for me. I don't think any of the earlier Froyo based ROMs are being developed further.
I meant as far as Stability, Performance and up to date, I don't care about the Stage UI and was gunna theme it myself or use SPB Shell 3D.
Could someone point me in the direction to an easy install rom?
I don't wanna install "these update pkg's" after renaming and then plug my phone into the pc and open cmd and then type this in on the pc. et cetera et cetera
I just wanna download a zip drag it to the card, bootup in safemode and install from sd card.
I'd consider doing all that work if I weren't testing out the device.
I won it off ebay, the guy replaced the screen and said it's been randomly rebooting ever since. But he never did a factory reset or new rom install ever since fixing the screen, so I just wanna simply install a rom and see if it works then go on from there.
Any help would be greatly appreciated.
n1nj4Lo said:
Could someone point me in the direction to an easy install rom?
I don't wanna install "these update pkg's" after renaming and then plug my phone into the pc and open cmd and then type this in on the pc. et cetera et cetera
I just wanna download a zip drag it to the card, bootup in safemode and install from sd card.
I'd consider doing all that work if I weren't testing out the device.
I won it off ebay, the guy replaced the screen and said it's been randomly rebooting ever since. But he never did a factory reset or new rom install ever since fixing the screen, so I just wanna simply install a rom and see if it works then go on from there.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Unfortunately I do not believe that anyone can change the way that the Streak works just so it is more convenient for you or so that you don't have to learn anything.
In the time you took to navigate to XDA and make your post you could have flashed a ROM onto your Streak - plugging it in and everything.
The only ROM you can install by just putting it on the SD Card is the same one that is currently on the Streak, if you don't mind holding down a couple of buttons and using recovery mode.
n1nj4Lo said:
Could someone point me in the direction to an easy install rom?
I don't wanna install "these update pkg's" after renaming and then plug my phone into the pc and open cmd and then type this in on the pc. et cetera et cetera
I just wanna download a zip drag it to the card, bootup in safemode and install from sd card.
I'd consider doing all that work if I weren't testing out the device.
I won it off ebay, the guy replaced the screen and said it's been randomly rebooting ever since. But he never did a factory reset or new rom install ever since fixing the screen, so I just wanna simply install a rom and see if it works then go on from there.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
If anyone is wondering why developers leave and give the site a bad reputation look no further. Someone with over 600 posts under his username should not be making noob posts like this one. With so many posts he knows how to use the search engine and the wiki, but I guess when it comes to our device using the search engine and the wiki is an inconvenience, along with renaming a file "update.pkg".
marvin02 said:
Unfortunately I do not believe that anyone can change the way that the Streak works just so it is more convenient for you or so that you don't have to learn anything.
In the time you took to navigate to XDA and make your post you could have flashed a ROM onto your Streak - plugging it in and everything.
The only ROM you can install by just putting it on the SD Card is the same one that is currently on the Streak, if you don't mind holding down a couple of buttons and using recovery mode.
Click to expand...
Click to collapse
So would that be this: Streak_407_20707_14.pkg ? According to the first post above me do I rename it?
Strephon Alkhalikoi said:
If anyone is wondering why developers leave and give the site a bad reputation look no further. Someone with over 600 posts under his username should not be making noob posts like this one. With so many posts he knows how to use the search engine and the wiki, but I guess when it comes to our device using the search engine and the wiki is an inconvenience, along with renaming a file "update.pkg".
Click to expand...
Click to collapse
Some people learn better through interaction where they can actually ask questions... I don't have over 600 posts so who are you talking about? Furthermore if you are talking about first thing I'd do is learn how to read mr wise guy, secondly!! You tell me how one is supposed to learn which rom is the best based on user reviews and opinions, where do I go to find that out and wheres the wiki on that, unless you expect people to read 200 and 300 page threads also? I have barely 150 posts and rarely post at all unless it is to ask questions or make requests. It's not like I have 600 posts and every single one of them are questions.
This is only my second time dealing with android and second time flashing android first time it was simply moving a zip to the sdcard and booting up into safe mode and selecting update through sdcard, so certainly I'd be baffled and have questions when one time it was so easy and the second time I've gotta jump through hoops and everything.
Lastly since WHEN Is asking a Question SOOOO wrong in the Dell Streak 5 Q&A Category???? It's not like I posted it in the wrong area or something, but ohhh no'es how dare n00b be confused and need a lil help/guidance of some experienced users, ohh mercy me the drama in that!!
Last time I checked that is what XDA is here for, for people to learn, not to be attacked by asshat trolls like you.
If anyone is wondering why XDA has a multitude more lurkers than posters look no further than to the hardass that is Strephon Alkhalikoi View Postwho can't stand to see a n00b in need of help!
Like this
Flashing/Updating
Installing a recovery
Download appropriate recovery to flash from Stock Recoveries or Custom recoveries
Enter fastboot mode on your phone
Flash recovery with fastboot: fastboot flash recovery <path to recovery.img>
After flashing is complete: fastboot reboot to reboot
Finished
If you are using a custom recovery see Disabling recovery overwrite in stock roms and follow the steps there to prevent the Streak from over writing the recovery. Re-install your custom recovery after following those steps.
Click to expand...
Click to collapse
BUT THE VERY FIRST THING THE WIKI SAYS IS To Stay AWAY From Fastboot, but this tells you to use Fastboot... So what gives and which is it? LoL
n1nj4Lo said:
. . . .
Like thisBUT THE VERY FIRST THING THE WIKI SAYS IS To Stay AWAY From Fastboot, but this tells you to use Fastboot... So what gives and which is it? LoL
Click to expand...
Click to collapse
I hope that you can actually read better than that. The wiki does not say to stay away from fastboot. It clearly states two commands that should not be used on the Streak. It goes onto give a number of examples of using fastboot.
I hope that you other 157 posts (as I wtite this) on XDA were not as tiresome or ill-informed as the ones you have posted here.
The information you need is here in the forums, available at the links in my signature, and on other forums. Please exercise some patience and read the info.
marvin02 said:
I hope that you can actually read better than that. The wiki does not say to stay away from fastboot. It clearly states two commands that should not be used on the Streak. It goes onto give a number of examples of using fastboot.
I hope that you other 157 posts (as I wtite this) on XDA were not as tiresome or ill-informed as the ones you have posted here.
The information you need is here in the forums, available at the links in my signature, and on other forums. Please exercise some patience and read the info.
Click to expand...
Click to collapse
Uhh yea sory... I forgot about the 2 options to stay away from, just the dangerous part stayed with me. LoL
Do I need to be at a certain android version or can I make a semi-major update leap?
Also it says
Installing a stock rom
Reinstalling a stock rom will wipe all data!
1. Download stock rom pkg and recovery to install
2. Copy pkg to sdcard and rename to update.pkg
3. Install matching stock recovery
4. Enter recovery mode
5. After recovery loads press Camera to begin process
6. Finished
Click to expand...
Click to collapse
Do I need the recovery.img as well? It said nothing about a img file or anything just said "matching stock recovery" so yea, is that the right thing?
_
First I'm gunna try factory reset and see if that fixes the random reboot problem, hopefully it does the seller said he just installed the new screen and never did anything except for just trying to powering it up, use normally and it would reboot suddenly.
WELL NO DUH, you need to restore everything back to default settings with a factory/hard reset. Thats like trying to install a video card or webcam and expecting it to work right away without installing the dirvers. - Hopefully!
Well it's only getting as far as the dell logo screen/splash screen. I've tried the entering safe mode but nothing yet, once it's powered on it just sits at that screen.
dsc is great and very stable if you dont mind the few following quirks.
1. google maps will always run in the background unless you freeze it. This will drain your battery quite quickly
2. Wifi might or might not be broken, if it is broken use wifi analyzer if not profit
the benefits of dsc?
fast
running GB instead of froyo
dpi change is awesome.
screen default orientation is awesome
stable other than those few bugs
Battery life was decent.
-------------
Im however just running 2.2 froyo on a stock rogers. The battery life is amazing on stock 2.2 (a whole day, and still have about 30% with heavy usage and constant 3g) and the wifi works fine. For me this is the most stable rom however it is a bit slow compared to DSC. This phone is used for work so it has to just.. work.
---------------
Havent really tried the other roms yet, but depending on what you want out of the phone you can try the DSC and see if you can live with these little quirks.
Yea I was leaning more towards DSC than Longhorn, it looks like it's updated more frequently too.
Bad & Good News
Turns out when the guy replaced the screen he fried the mobo... Me and a friend at a small local pc store tried everything from rooting with new rom to factory resets. Always had the same problem.
But the guy at the pc store sells phones also and said he'd give me $100.00 credit to a new factory refirbed, rooted and unlocked dell streak mini if I gave him the one we tried to repair.