hello! i installed greyblur on my atrix and after the first boot up when i tried to unlock it the screen doesn't work!!! i tried to open it with the fingerprint scanner but it doesn't work alsoo!! the power button doesn't work!!! please help me !!!
*sorry for my english i'm from greece...
I would sbf.
what does tha mean?
komakos96 said:
what does tha mean?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=991072
Try this. Make sure you read it well to make sure out applies to your device. I'm assuming you doing have am At&t atrix. This is for must of the international versions.
http://forum.xda-developers.com/showthread.php?t=1070076
[GUIDE] – Flash SBF/Root/Recovery/DeOdex -> A to Z - SBF 2.1.1 + 1080p + P.ROMS!
Sent from my MB860 using XDA Premium App
defnow said:
http://forum.xda-developers.com/showthread.php?t=991072
Click to expand...
Click to collapse
How do I always reply one minute late???
:/
Sent from my MB860 using XDA Premium App
my phone is at&t branded but it has been unlocked if i flash sbf it will b locked again on at&t?
komakos96 said:
my phone is at&t branded but it has been unlocked if i flash sbf it will b locked again on at&t?
Click to expand...
Click to collapse
I'm not sure about the lock. Sorry.
Sent from my MB860 using XDA Premium App
is there any hope?
komakos96 said:
is there any hope?
Click to expand...
Click to collapse
Hold off for a few minutes before you SBF and risk losing your unlock. Other phones I have had, doing a similar process as sbf, has killed unlocks.
Unlock is Safe
Once unlocked its always unlocked
ChongoDroid said:
Once unlocked its always unlocked
Click to expand...
Click to collapse
Theres your answer now SBF
im downloading the sbf now it is 1.4 gb !!!
compressed it should only be about 700mb
first i downloaded the first file 1.2.6 but when i tried to extract winrar i had an error "no archives found"
yeeeeeaahhhh!!! my phone is working again thank you very much guys !!!!
now can i try reflash the rom???
Related
system version: 4.1.83 att us
baseband version 01.77.15p
android version 2.2.2
i bricked my old atrix trying to install gingerblur on it. since i don't want to mess up again, can someone please help me with this? i'm pretty noobish on android (wnt form iphone 4 to atrix) and don't want to mess up again
thanks!
How do you hardbrick flashing gingerblur?
Sent from my MB860 using XDA App
Javi97100 said:
How do you hardbrick flashing gingerblur?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
lol dunno
i bought my atrix off of ebay, rooted and unlocked the bootloader, then messed up with gingerblur. maybe it was because i had the lastest updates installed on the atrix?
fdotorres said:
lol dunno
i bought my atrix off of ebay, rooted and unlocked the bootloader, then messed up with gingerblur. maybe it was because i had the lastest updates installed on the atrix?
Click to expand...
Click to collapse
With what recovery did you flash gingerblur
Sent from my MB860 using XDA App
Javi97100 said:
With what recovery did you flash gingerblur
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
tenfar's CWM
fdotorres said:
tenfar's CWM
Click to expand...
Click to collapse
You were supposed to flash through the system recovery app's recovery, but anyways back to your question. If you follow directions on how to do things im sure you'll be fine off, as of now the only way to hardbrick is to sbf back when you have the ota installed,
Sent from my MB860 using XDA App
Are you sure that your old atrix is hardbricked? Sounds like it would be more of a softbrick unless your old atrix had Gingerbread. Eitherway, it sounds fixable.
Javi97100 said:
You were supposed to flash through the system recovery app's recovery, but anyways back to your question. If you follow directions on how to do things im sure you'll be fine off, as of now the only way to hardbrick is to sbf back when you have the ota installed,
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
i'm unable to root it for some reason. tried cmd method as well as superoneclick... don't know what else to do
1. How do I unlock the bootloader?
2. Does it have to be rooted before unlocking the bootloader?
3. How do I know if my bootloader is already unlocked? Is that a possibility?
4. I need to find a rom that supports arabic.
http://forum.xda-developers.com/showthread.php?t=1154600
xploited said:
http://forum.xda-developers.com/showthread.php?t=1154600
Click to expand...
Click to collapse
Thank you for replying so quickly. How do I know if my bootloader is already unlocked?
ahmada said:
Thank you for replying so quickly. How do I know if my bootloader is already unlocked?
Click to expand...
Click to collapse
It will have the "Unlocked" text in the top left corner when you boot it.
What's the easiest method to do the unlock?
ahmada said:
What's the easiest method to do the unlock?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=15930466
Hopefully the link worked.
Sent from my ATRIX 4G XDA Premium App
Voelker45 said:
http://forum.xda-developers.com/showthread.php?p=15930466
Hopefully the link worked.
Sent from my ATRIX 4G XDA Premium App
Click to expand...
Click to collapse
I unlocked the bootloader thanx for your help
Now which rom supports arabic? I have 2.3.4 build 4.5.91
ahmada said:
I unlocked the bootloader thanx for your help
Now which rom supports arabic? I have 2.3.4 build 4.5.91
Click to expand...
Click to collapse
Did you root too? Cause rooting is must for using ROMS.
Voelker45 said:
Did you root too? Cause rooting is must for using ROMS.
Click to expand...
Click to collapse
Yes I did. I unlocked the bootloader and rooted.
I personally don't know what ROMS have that support. You can experiment or ask around. The best performance ROM right know is Alien.
Sent from my ATRIX 4G XDA Premium App
Ok I finally figured out the right rom and I managed to get the arabic fonts to work properly. I am using this rom http://forum.xda-developers.com/showthread.php?t=1239129 and was wondering if there is a way to change the theme that is being used. I tried installing aHome but that kept crashing. Any suggestions? Any Good Themes?
im using the honeyglow theme. I like it a lot. Will have to install RomRacer's CWM Recovery to flash it.
RomRacer's CWM Recovery + Instructions
HoneyGlow Theme
Is it possible without hard bricking the phone? The upgrade is causing WAY more trouble than it's worth and a lot happier running roms. Thanks.
Sent from my SAMSUNG-SGH-I727 using XDA App
Got another question but not gonna make a new post, can you use the auto boot unlocker to unlock/root 4.5.141? It's only updated to .91
Sent from my SAMSUNG-SGH-I727 using XDA App
Was your bootloader previously unlocked?
Gfrt94yn said:
Got another question but not gonna make a new post, can you use the auto boot unlocker to unlock/root 4.5.141? It's only updated to .91
Sent from my SAMSUNG-SGH-I727 using XDA App
Click to expand...
Click to collapse
live4nyy said:
Was your bootloader previously unlocked?
Click to expand...
Click to collapse
I can at least keep this alive and going. Mine was previously unlocked, and, once the update applied, which did it overnight without my permission (HNNNGH), I lost it. What do I do now?
Gfrt94yn said:
Got another question but not gonna make a new post, can you use the auto boot unlocker to unlock/root 4.5.141? It's only updated to .91
Sent from my SAMSUNG-SGH-I727 using XDA App
Click to expand...
Click to collapse
Yes /10 char
I think you will find that you just lost the unlock graphic; unlocking involves burning out one of the eFuses, so you can't relock.
Hi everone
Im using a rooted, BT UL Atrix 4G with 2.3.6 4.5.191. and Im wondering if this is possible to perform this downgrade or/to 2.3.4
I want to do that becouse my GPS takes a lot to get a fix and I had no luck with other methods like: changing gpsconfig, recalibrating compass, using different radios
Thanks
Downgrading to 2.3.4 IS POSSIBLE provided you have previously unlocked your bootloader AND you have a backup of 2.3.4 through CWM.
This is treacherous territory, and I'm not sure if there's been resolution on whether or not it's safe.
Your safest bet? Fruit cake it back to 4.5.91.
Is it possible to downgrade using RSD if the bootloader was never unlocked?
bloodhawk said:
Is it possible to downgrade using RSD if the bootloader was never unlocked?
Click to expand...
Click to collapse
Don't do it. You will get failed to boot 2.
MB860, CM7.2.0, Faux 026b1 1Ghz
bloodhawk said:
Is it possible to downgrade using RSD if the bootloader was never unlocked?
Click to expand...
Click to collapse
No that would brick it and you would be screwed. We already saw this issue when people tried to go backwards from GB to Froyo...
Sent from my GT-I9100 using xda premium
I have used the automatic bootloader unlock for 4.5.141 but I may be just lucky
Sent from my MB860 using xda app-developers app
Yeah it is working fine on 4.5.141 ... Unlocked and Rooted, running Neutrino 2.8 GT
But the phone is heating up even @ 1 GHz. (no undervolt)
So was curious if flashing the ROM over 4.5.91 will help or not.
- Is it not possible to downgrade even using Nottach's method? Flashing the 4.5.91 images directly from fastboot and not bothering with RSD ?
NVM...
Sent from my GT-I9100 using xda premium
So is it feasible?
Downgraded successfully by flashing the separate partition using moto-fastboot.
Got the 4.5.91 images from here : http://forum.xda-developers.com/showthread.php?t=1163342
wifi error.....
bloodhawk said:
Downgraded successfully by flashing the separate partition using moto-fastboot.
Got the 4.5.91 images from here : http://forum.xda-developers.com/showthread.php?t=1163342
Click to expand...
Click to collapse
4.5.91 resolves wifi error?
the link is down.
I bricked my photon when I was trying to install a custom rom..
I get the error failed to boot 2.
When I try to follow the steps mentioned here...http://forum.xda-developers.com/showthread.php?t=1540349
In the first step itself when I want my phone to be back to stock I not able to do it...When im trying to transfer the sbf file I get "Failed flashing process. Unable to retrieve interface handle. (0x7027)"
Please guide me what to do.
which version? 2.3.4 or 2.3.5
if 2.3.5 http://forum.xda-developers.com/showthread.php?p=29366503
Sent from my Slim Photon using Tapatalk 2
jrebo said:
which version? 2.3.4 or 2.3.5
if 2.3.5 http://forum.xda-developers.com/showthread.php?p=29366503
Sent from my Slim Photon using Tapatalk 2
Click to expand...
Click to collapse
I dint understand ur question...
Before installation a custom rom my phone was in 2.3.5
I tried to install the latest MIUI rom for photon.
srikarchinna said:
I dint understand ur question...
Before installation a custom rom my phone was in 2.3.5
I tried to install the latest MIUI rom for photon.
Click to expand...
Click to collapse
Bootloader is locked or unlocked???
Sent from my MB855 using xda app-developers app
Cooldevil1989 said:
Bootloader is locked or unlocked???
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
It is locked...
I did not unlock the bootloader..
Thats what the problem was your bootloader was locked so you cant flash roms that only work when unlocked
Sent from my MB855 using xda app-developers app
MarcquisDale said:
Thats what the problem was your bootloader was locked so you cant flash roms that only work when unlocked
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
Omg! Now what are the steps to be followed...?
Use it as a pretty paperweight
Sent from my MB855 using Tapatalk 2
onarbuithe
Productzer01 said:
Use it as a pretty paperweight
Sent from my MB855 using Tapatalk 2
Click to expand...
Click to collapse
not very funny..
I'm not joking unfortunately.
Look for electrify unlock I think that's your only option
Sent from my MB855 using Tapatalk 2
Productzer01 said:
I'm not joking unfortunately.
Look for electrify unlock I think that's your only option
Sent from my MB855 using Tapatalk 2
Click to expand...
Click to collapse
Yea thats only option and then you can flash stock zip back
Sent from my MB855 using xda app-developers app
1st if you haven't tried it yet go to recovery and do a wipe and reset.
If that don't work...
Find the Electrify 2.3.5 USC_19 sbf file you can install to get back up and running. But its not sprint. You have to install a couple of other files to get the sprint radio and wi-fi to work. It's all here, google is your friend.
Good Luck.
The 1st reply you got has the info to get you back to sprint.
Screwed by Google. Canceled ICS upgrade on my Moto Photon. No Wow for us.
rbeavers said:
1st if you haven't tried it yet go to recovery and do a wipe and reset.
If that don't work...
Find the Electrify 2.3.5 USC_19 sbf file you can install to get back up and running. But its not sprint. You have to install a couple of other files to get the sprint radio and wi-fi to work. It's all here, google is your friend.
Good Luck.
The 1st reply you got has the info to get you back to sprint.
Screwed by Google. Canceled ICS upgrade on my Moto Photon. No Wow for us.
Click to expand...
Click to collapse
im not able to enter the recovery mode....
Is there no other way????
I need little more explanation plz.
Could you please explain all the steps I need to follow..Coz I'm a little new to all these stuff...
I did see the this thread http://forum.xda-developers.com/showthread.php?t=1798145 but i dint understand from it..
So I want you to enlist the steps to be followed
When I tried to flash with Electrify 2.3.5 USC_19 sbf file..I finished but in the end I got this error "Error switching phone to BP pass through mode (0x70BE)".
Is this expected??
There is an error don't remember what it is.
Pull battery put back in did it boot up?
Screwed by Google. Canceled ICS upgrade on my Moto Photon. No Wow for us.
The error is actually ok just pull battery out and put it back in and turn on the phone, us cellular boot screen should come up and also it may take a little time to boot up completely to home screen.
Sent from my MB855 using xda app-developers app
Yes , It worked ! It has reached the home screen..Now what is the next step????
From the other thread.
Full
After flashing this, you need to flash locked custom rom, "2.3.5_254_13 sv2 boot, recovery and cdrom image" and some sv2 sbf radio, for working Sprint services, including 4G.
Screwed by Google. Canceled ICS upgrade on my Moto Photon. No Wow for us.
Lol i like that signature
Sent from my MB855 using xda app-developers app
ok so I found this thread and step by step http://forum.xda-developers.com/showthread.php?t=2058665
when i flash the new rom Peetr’s Hybrid Locked 2.3.5 ROM. it wont boot the new rom someone please help
max98059 said:
ok so I found this thread and step by step http://forum.xda-developers.com/showthread.php?t=2058665
when i flash the new rom Peetr’s Hybrid Locked 2.3.5 ROM. it wont boot the new rom someone please help
Click to expand...
Click to collapse
Did you wipe the data?
MarcquisDale said:
Did you wipe the data?
Click to expand...
Click to collapse
yes i did all the wipes and ever which way. i have tried it abt 20times on two phones all ends in the same way "fail to boot 2"
do u by chance have a step by step? and i will try it that way! thanks for ur help!!!!
MarcquisDale said:
Did you wipe the data?
Click to expand...
Click to collapse
Try flashing the electrify 2.3.5 sbf
MarcquisDale said:
Try flashing the electrify 2.3.5 sbf
Click to expand...
Click to collapse
i did i used 1FF-sunfire-user-2.3.5-4.5.1A_SUN_USC_19.0-19-release-keys-signed-USC-US.sbf
MarcquisDale said:
Try flashing the electrify 2.3.5 sbf
Click to expand...
Click to collapse
What about the unbrick file
MarcquisDale said:
What about the unbrick file
Click to expand...
Click to collapse
yes i did step by step. i have two phones both do the same thing when flashing HybridGBv20locked.zip. but if i just flash the radio in bootstrap it works ok. i think i am flashing HybridGBv20locked.zip wrong in bootstrap. can u give me a step by step to flash HybridGBv20locked.zip thank you so much!!!!!
MarcquisDale said:
What about the unbrick file
Click to expand...
Click to collapse
After flashing sbf and unbrick files you should root your phone and install bootstrap. Once bootstrap is installed flash kddi, 2.3.5 radio, hybridlocked20 and then kddi again. There's a chance you may get boot loops if you do then clear your data.
Thats how i did it and it comes back as fail to boot 2. It works ok with just the us cell rom loaded
Sent from my Motorola Electrify using xda app-developers app
max98059 said:
Thats how i did it and it comes back as fail to boot 2. It works ok with just the us cell rom loaded
Sent from my Motorola Electrify using xda app-developers app
Click to expand...
Click to collapse
Might be just something with your phone then
I have two of them both do the same thing
Sent from my Motorola Electrify using xda app-developers app
I don't know what's wrong then I've never had that problem
Could it be a bad file i tried down loading it 3 times
Sent from my Motorola Electrify using xda app-developers app
max98059 said:
Could it be a bad file i tried down loading it 3 times
Sent from my Motorola Electrify using xda app-developers app
Click to expand...
Click to collapse
Post the link I'll try it