Related
Is there anyway to unbrick the x10?
It is showing up an exclaimation mark with picture of x10 when the phone starts up
It just stops there and the phone won't boot.
I have tried using SEUS version 2.10.5.11 and PC companion 2.00.134.
For SE update service, when I clicked on X10 and did the instructions given, it says that I have already installed the latest firmware and the only option was to exit. There is no reinstall option.
For PC companion, when I click repair and followed the instructions, it told me to check my internet connection as it wasn't able to connect. I tried disabling my firewall but to no avail. I'm just stalled at Step 3. I have also pressed both pictures of X10 and both gave me the same error.
From other websites, one person was able to unbrick his phone by using davinciteam's debranding service from their x10 blog. I don't know whether it will work and I do not have an account to purchase their service.
So does anyone have any ideas on how to unbrick the X10?
EDIT: Seems that we can only use Davinciteam debranding to unbrick the phone but it costs 10 euros - I personally did not try it
And I have sent my phone to Sony Ericsson service to get it unbricked.
So next time guys, after you debrand your phone, remember to rebrand it to original before debranding it to another firmware. That was my mistake. After I get my phone back, I'm going to try it again
EDIT: 22/5/10
My phone is unbricked and seriously, how do they do it?
Wonder if they can like share their methods with us
I will try to debrand once again tomorrow, and hopefully I do not need to pay them another visit at their service center
Sony Ericsson service. I was yesterday and 15 - 20 minute to unbricked my phone ;-)
slezi said:
Sony Ericsson service. I was yesterday and 15 - 20 minute to unbricked my phone ;-)
Click to expand...
Click to collapse
Hey can you explain to me your steps?
I tried to unbrand my phone, the first firmware upgrade succes. The third firmware (nordic 16) SEUS said succes, but when i turn on my phone i gace sam nic picture on my phone. I called my place nearest SE service and i get may car, and drive the service...
Oh, so you went to their services..
How did you tell them to fix your phone?
They are special update software.
Aztriltus - my friend happened the same thing to you, he use this Davinci Flashing / Debranding service and his X10 works well again. But it costs 10euro.
Search google for "davinciteam".
Hmm so I guess there isn't any manual way to unbrick x10..
Nevermind, I have already sent my phone to servicing
Wonder how do they unbrick them lol.
just use the debranding service davinciteam is offering. You download the program off their website and purchase credits, then just login with your user details on the program and follow the instructions (much like seus). You can choose from the list what firmware you want and it'll be up and running.
davinci
I was so happy when I read about DaVinci. My phone hung quite down as described above. But with the software I got him running again. Approximately 15 minutes and he is back again. I have already rooted him again.
Root your phone & it's unbricked
Have you tried the flash unbrick tool? It fixes it nomatter what. No need to spend any money for something available here for free
what is that called?
omarr50 said:
what is that called?
Click to expand...
Click to collapse
XIOFUB.rar is the flash tool.
a_WWE_R1FA014_DEK is the Rogers file (select the one that you need for your region)
http://forum.xda-developers.com/showthread.php?t=683793
Posts 2 and 3
My phone wasn't Bricked like yours in the sense that it didn't show the exclamation point when you attempted to turn it on, mine just stayed at the "Sony Ericsson" screen and wouldn't not move on.
This video is what got me back to 1.6:
http://www.youtube.com/watch?v=4AZ_10cvd9k
I did a lot of theme changes, I think that's why I screwed my phone up. Lesson learned.
Moved to Correct Forum
Hi, everyone I just joined this forum. I have X10i with firmware 2.1. While searching the thread i came acrosss terms like root, xrecovery, flashing, MT, generic etc. Can someone help me out what these terms mean. I wanted to upgrade my phone to gingerbread. Previously I am an iphone user So i am total noob to this OS and the phone
Thanks in advance
good get away from iphone
root--same thing as jailbreak
xrecovery-- a badass tool that lets you flash roms onto your phone.
flashing-- umm... it is like installing a modified version of even the legit version on the device
generic-- A product having no brand name or registered trademark
example= for device there is branded or non branded
branded means that a company like ATT or Rogers approves that firmware or OS version. So when you turn your phone on, you will usually see something related to them. like an animation of the att world
generic--- clean install. no company restrictions. just regular
ok links for all that crap above
2.3.3 firmware (does not matter if you download x10a or x10i)
Generic-----
http://forum.xda-developers.com/showthread.php?t=936733
do yourself a favor and read
http://forum.xda-developers.com/showthread.php?t=936733 before and download the program WINDOWS only
Thanks for your help. I am going to upgrade my phone soon so is their any problem in doing so and by the way should i just use the SEUS or flash tool
angel eyes said:
Thanks for your help. I am going to upgrade my phone soon so is their any problem in doing so and by the way should i just use the SEUS or flash tool
Click to expand...
Click to collapse
Either will do.
ok thanks for the advice going for the upgrade now lets hope everything goes smoothly will post the results
Now this is the end result of upgrading my phone I used SEUS to upgrade my X10i the phone went into flash mode and the SEUS detect that new software is available soit downloads it but when it comes to installing it stopped at about 15% and said that updATE cannot continue check battary is fully charged and than again try. As far is i remember phone was fully charged when i put it for update now what should i do. The phone doesnt restarts now and when I power up my phone only th egreen led blinks and it vibrates for split second than nothing I waited for it but the phone is not responding what should i do now
HELP NEEDED
to tell you the truth i dont know what SEUS is
i think it is for drivers or something but you should use PC comapanion for drivers
ok
use flashtool in the first link i gave you and download one of the 2.3.3 files
or use a 2.3.3 rom
and flash the sucker on
it should work
Try flashtool if doesn't work let your phone on charge for 1 hour and take it off try again whit seus should be good to go
Sent from my X10i using xda premium
Thanks for the help guys now i have downlaoded flashtool 0.2.8, 2.9,3.0 i also downloaded the firmware and did all the steps according to the toturiol but that what happens it detect the phone in flash mode the flashing starts but at fato1.sin it gives as error message "error flashing abort". I also tried other firmwares but the same error.
Now guys I think I am great trouble so need help
What to do next
And I used the desktop charger to charge the battery for whole two houra but SEUS gives the same error plus pc companion gives error as well i am stuck
Go to pc application manager, close seus and pc companion. Try flashtool tool once again http://forum.xda-developers.com/showthread.php?t=928343. I hope this work for you.
Sent from my SO-01C using Tapatalk
Ok i will try that one too thanks alot lets see wat happens
ok tried that too nu luck
What should i Do now One thing more i was goignaround the threads looking for solution So in one thread it said that firmware can ber installed through flash tool 0.2.5
I tried that too and amazingly the flashing goes all the way to the end on 0.2.5 in the end i get the msg that flashing complete and remove the phone but when i remove the phone and turn it on it just vibrates and small blip of green flash led than nothing
What could be the problem
1. Download Flashtool from
http://doomlord.sylvester20007.com/x10/x10_gb/FlashTool_0.2.9.1-GBready_root_xRec.exe
2. Download the generic 2.3 ROM of your choice
http://forum.xda-developers.com/showpost.php?p=11038646&postcount=1
Personally I would get the Global version unless you can find your country specific one.
Global version download - http://www.multiupload.com/JEXUAHAZTL
3.
a) connect your phone to your PC, make sure it installs the drivers (if your Sony software is working it is fine)
b) Extract Flashtool into a directory you know
c) Extract the firmware file you downloaded. And move the ftf file into the "firmware" directory of Flashtool
d) Make sure your phone is not connected to the PC and is off.
e) Run Flashtool, click on Flash and select the firmware you have just downloaded.
f) It will give you the same instruction - holding the "back" key, (phone still off) connect it to the PC. If you did this correctly, the light will be green and it will start flashing your phone.
g) After it is completed, reboot your phone once or twice and check that it is working.
4. Installing xrecovery and rooting refer to instructions (you already have all the files from when you download in step 1)
http://forum.xda-developers.com/showthread.php?t=1196808
Let me know when you have completed the steps above.
Thanks for advice downloading it now and going to try and will let now about the results
sasukewa said:
1. Download Flashtool from
http://doomlord.sylvester20007.com/x10/x10_gb/FlashTool_0.2.9.1-GBready_root_xRec.exe
2. Download the generic 2.3 ROM of your choice
http://forum.xda-developers.com/showpost.php?p=11038646&postcount=1
Personally I would get the Global version unless you can find your country specific one.
Global version download - http://www.multiupload.com/JEXUAHAZTL
3.
a) connect your phone to your PC, make sure it installs the drivers (if your Sony software is working it is fine)
b) Extract Flashtool into a directory you know
c) Extract the firmware file you downloaded. And move the ftf file into the "firmware" directory of Flashtool
d) Make sure your phone is not connected to the PC and is off.
e) Run Flashtool, click on Flash and select the firmware you have just downloaded.
f) It will give you the same instruction - holding the "back" key, (phone still off) connect it to the PC. If you did this correctly, the light will be green and it will start flashing your phone.
g) After it is completed, reboot your phone once or twice and check that it is working.
4. Installing xrecovery and rooting refer to instructions (you already have all the files from when you download in step 1)
http://forum.xda-developers.com/showthread.php?t=1196808
Let me know when you have completed the steps above.
Click to expand...
Click to collapse
I have done it as adviced but no luck flashing aborts in the middle and giving error message now wehat should i do
Do you have the new flash tool?
angel eyes said:
I have done it as adviced but no luck flashing aborts in the middle and giving error message now wehat should i do
Click to expand...
Click to collapse
Can u do a screen shot or tell us what the error message is?
Thx.
Dark Nightmare said:
Do you have the new flash tool?
Click to expand...
Click to collapse
I have flash tool 0.2.5,0.2.8,0.2.9,0.3.0
Have tried them all only 0.2.5 goes all the way to the end but when i turn on the phone it only virbrates and green led flashes for sec than nothing
When you reboot is there anything showing on the screen? Sony logo...anything? If yes, wait it can take a long time for a new rom to install. If no, I think you need to revert back to the 2.1 rom, root and install busybox, superuser, and xrecovery. once thats done you can backup your rom and data so you don't get stuck updating or if you have trouble with a custom rom etc. Also I think your battery stats should be wiped using xrecovery, it sounds like SEUS checked this and the file said your battery was too low to continue the update. Here is a good place to start.
http://forum.xda-developers.com/showthread.php?t=928343&highlight=flashtool+for+noobs
Here is a video on youtube that may help too:http://www.youtube.com/watch?v=HmX-IYNYqL8
Hope this helps you, Good Luck.
angel eyes said:
I have flash tool 0.2.5,0.2.8,0.2.9,0.3.0
Have tried them all only 0.2.5 goes all the way to the end but when i turn on the phone it only virbrates and green led flashes for sec than nothing
Click to expand...
Click to collapse
Try taking the battery out and then try flashing again. Which ftf file are you flashing or selecting in the flash program. You need to use at least a 0.2.9 version of the flashtool.... if you use 0.2.5 start with the 2.1.54 ROM first.
Here is something to repair your bootloader after a FOTA update and phone iIn the package you have flash tool and the files you need.
Just unzip to a folder and then use flash tools.
The needed files are in the right folders.
After this you should have your phone fully back for a fresh rom install.
Use wotanserver to flash a full custom rom of your choice.
http://www.mediafire.com/?h2dwrz18mujx765
it exactly for these files
is compatible with other firmware?
file (Xperia_2011_Range_FreeXperia_ALL.ftf) that function does?, I think that fixes an error
for all xperia range
Please can you explain better for neophytes, as I understand many do not
There´s not much to explain, this .sin and ftf files repair the damage bootloader and the trim area.
If you ´re unable to start phone after a fota update with unlocked bootloader.
Just plug the phone and connect it pressing back button in your xperia neo and press flash on the flashtool. And voila you have you phone live again.
Thanks, now if I understand it, since I have opened the bootloader release your contribution if you ever need it
regards
TNX
It works!!! TY!!!
It´s good to be helpfull man, fota brick is a serious issue. I´m glad to share this. Don´t forget to click on thanks buttom.
Thank you very much for this. It helped me to restore my brothers Neo that got screw-up after unsuccessful FOTA update.
Tried it on my MT15i NEO that got bricked after FOTA yesterday, but doesn't work for me.
I managed to get the 2 files flashed, after, i use wotan to restore latest firmware.
When I try to turn the phone on after this process, only red led flashes 3 times.
SEUS and SE Companion tells me I have software that isn't updatable.
Any other idea's to get my phone back alive?
arn01805 said:
Tried it on my MT15i NEO that got bricked after FOTA yesterday, but doesn't work for me.
I managed to get the 2 files flashed, after, i use wotan to restore latest firmware.
When I try to turn the phone on after this process, only red led flashes 3 times.
SEUS and SE Companion tells me I have software that isn't updatable.
Any other idea's to get my phone back alive?
Click to expand...
Click to collapse
If you flash the files and wotan recognises your phone and flash´t then your phone is ok.
Try to flash´t first with any 2.3.2 stock rom.
Just used wotan to flash 2.3.2 - 3.0.A.2.181 ROM, but problem stays the same.
After pressing the power button, only the led flashes red 3 times and nothing else happens.
Starting in flash programming mode is difficult too(the back button while connecting the USB). I guess 1 time in 50 tries I get a green led and flashing begins, other times it's just a quick red blink and unrecognised USB device.
I can't access the fastboot blue led mode anymore too (holding menu while connecting USB)
Are there some other options that I can try?
Edit:
Finally got it working after leaving the phone alone to the laptop for half an hour.. Phone just started to boot out of itself.. Very slowly.. it stayed on the SE boot logo for about 5 minutes. After restart and upgrade to latest stock with companion; it works okay again.
Thanks for helping me out!
I´m glad your phone is back, try to update it normally now to 2.3.4 and see if the blue lite is back.
Give us here in forum your feedback because this may be helpfull to other users.
I updated to 2.3.4 with SE companion software already and all seems to work okay!
Just tested the blue led/fast boot mode and it works again too.
This is the first and last time i'll do a FOTA upgrade without reading the forum!
Thanks again
testadeferro said:
Here is something to repair your bootloader after a FOTA update and phone iIn the package you have flash tool and the files you need.
Just unzip to a folder and then use flash tools.
The needed files are in the right folders.
After this you should have your phone fully back for a fresh rom install.
Use wotanserver to flash a full custom rom of your choice.
http://www.mediafire.com/?h2dwrz18mujx765
Click to expand...
Click to collapse
works for me...
This is by far the best tool for all of us.
Great job and THANK YOU for this
My phone is back
P.S.after i use the first tool (loader.sin in my case) i made upgrade on wotanserver with 4.0.2.A.0.42 kernel 2.6.32.9 generic german 2.3.4 (it is only version woking for us)
DO NOT TRY UPDATE WITH PC COMPANION it will brick your phone again (only if you have unlockbootloader)
Thank you for this post! It saved my Neo after I tried the ICS rom...
It worked for me, thanks.
this just recovered a supposedly faulty xperia play off ebay http://www.ebay.co.uk/itm/160753314044?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
cheers
hello
i bricked my neo v by flashing a wrong kernel
i downloaded fota unbrick and opened flash tool. it says i should hold the back button while connecting the usb but when i do so the led becomes green. nothing else happens! the phone doesn't turn on, flashtool doesn't recognize it, and the screen doesn't turn on. the led just stays green!
help plz
Hi
To start with, I'm a complete noob so sorry about that.
I got an x10 mini pro last year for my birthday. I don't remember the android version it came with but somewhere during the beginning of this year, I updated my phone to android 2.3.4 running on firmware was .62
Anyway, the phone comes with pre installed bloatware and the new update stuff like the 3d camera (which I never use and don't want)
So, I set about the scary task of rooting my phone. I tried z4root and superoneclick. They didn't work so I used Flash Tool 0.7.1.0.
I did a lot of reading and spend a lot of time going through tutorials before starting.
First, I flashed .42 firmware on the phone.
The log said that it was flashed successfully. I tried rebooting the phone but it gets stuck. The screen shows "Sony Ericsson" (the text) and it dissolves into blue color. Then it loops again. So I guess it's bricked?
PC companion doesn't read the phone so I can't use that.
I tried using SE update but it gives me an error message (I'm on Windows 8 so it could be the Java)
Flash Tool doesn't recognize the phone anyway.
I can't enter flashmode or fastboot mode.
Half of me wants to throw this phone against the wall but the other half of me just wants to fix this.
HELP?????
Edit: OK, now it won't even go to the boot screen. Its completely dead. When I press the power button, it vibrates but the screen is black. No LED light either.
Well i had bricked my phone too.
It was sawing sony and sony again and again.
It wasnt recognized by seus or PCC either but flashtool could detect it at least.
And Just a question your phone stopped working out of nowhere? i mean not even the led would light?
You did something. didnt you?
edit:
After i research i found this
http://forum.xda-developers.com/showthread.php?t=826455
Let me remind you a thing.
You have to keep holding back and then connect your phone with the PC.
EDIT AGAIN:
try uninstalling every single app wich interacts with your mobile also uninstall all the drivers in your computer for your phone and then reinstall flashtool and install all the drivers (for me it worked once... i dont know why but th drivers where not working correctly) from flashtool
Gentlemen, I couldn't find a section for Xperia Pro, please excuse me if this is misplaced.
I rooted my MK16i from ICS 4.0. according to a guide here on XDA forum, with no problems (from 4.1.a.435 .. i think).*
Then I installed system tuner and backed up the bloatware and what I believed was obviously named as packages that support them. Things were working great and the phone gained some performance improvements.
UNTIL, I installed Viber and Skype, and niether were working. I thought I would fix it by restoring all the backed up services and apps. Once I did that and rebooted the phone, it became useless
THe phone keeps rebooting. I get to the XPERIA loading screen and then it restarts again
I tried to connect it to the PC to flash another ROM with the Flashtool, but it is not recognized. All I get is in the computer screen a removable disk drive, that is not accessible.
Note: I didnt update the firmware after I rooted.
Can anybody help?
have you worked with flashtool before ? because there hardly could be any wrong with flashtool. use the latest version with proper drivers.
and since you have rooted phone, have you unlocked your bootloader ? if yes, then flash any custom kernel, go to CWM, then place rom zip on sdcard and stright flash rom via CWM.
flashtool should work though. you can try on different computer.
If flashing a kernel or installing custom ROM sounds a bit out-of-reach, you can always go for the repair option in PC Companion. It worked for me when I had soft-bricked my Neo V (it wouldn't go past the SONY logo). However, be advised that this repair option will erase your phone's internal memory. Also, your phone will be brought on the latest stock ROM, so you will need to root your phone again.
Good Luck!!! :good:
acemccloud1 said:
If flashing a kernel or installing custom ROM sounds a bit out-of-reach, you can always go for the repair option in PC Companion. It worked for me when I had soft-bricked my Neo V (it wouldn't go past the SONY logo). However, be advised that this repair option will erase your phone's internal memory. Good Luck!!! :good:
Click to expand...
Click to collapse
I tried to do somethingn like this but sony companion itself cannot detect the phone either.
My question is, is there a brick that cannot be fixed? I took it to a shop today and still they cannot fix it.
Have you tried to use sony update service?
How are you connecting your phone to flashtool?
Can you show us log from flashtool?
New development:
Now I tried to flash the phone with flashtool 32bit rather than 64-bit and it detected the phone! I could even flash the only firmware in Aeonworld's post Here.
Now I can see the phone connected in my computer.
However, the phone still won't boot but when I power on it gives black screen and after a short while, the led on the side becomes green.
For some reason though, I cannot continue with the rooting steps in his guide.
So anyways, after the second reboot, not the first for some reason, the phone gets detected in PC Companion, and I installed the update and now it is working again :victory:
Thank you all for your support.
moeness86 said:
New development:
Now I tried to flash the phone with flashtool 32bit rather than 64-bit and it detected the phone! I could even flash the only firmware in Aeonworld's post Here.
Now I can see the phone connected in my computer.
However, the phone still won't boot but when I power on it gives black screen and after a short while, the led on the side becomes green.
For some reason though, I cannot continue with the rooting steps in his guide.
So anyways, after the second reboot, not the first for some reason, the phone gets detected in PC Companion, and I installed the update and now it is working again :victory:
Thank you all for your support.
Click to expand...
Click to collapse
Good to hear that bro!!! R&D always makes a man better