I am sorry if this was answered before, but I have tried to search and couldnt find anything..
I have a Samsung Vibrant, of course, and had flashed Trigger 3.2. It was working great until applications started to fail such as the web browser. The applications will start but never actually run. So I tried to restore my nandroid backup, but after doing that, everytime I try to reboot my phone it stays stuck on the lock screen with "Searching" on the top right corner. Im assuming it is searching for the network, but it wont let me unlock the phone. I flashed Trigger again and it worked fine. I try restoring and Im stuck again. I also tried to factory reset and it still does the same thing.
has anyone else encountered this and know how to fix it?
Just odin back to stock with dl mode
Sent from my SGH-T959 using XDA Premium App
Factory reset from Recovery and re-flash Trigger again this time wiping cache, dalvik and fixing permissions after the flash. Now when restoring make sure to check APPS ONLY.
Abu-7abash said:
Factory reset from Recovery and re-flash Trigger again this time wiping cache, dalvik and fixing permissions after the flash. Now when restoring make sure to check APPS ONLY.
Click to expand...
Click to collapse
This is all correct. It is likely when restoring you are restoring old system data
thanks for the help! If I did this, would I still be able to flash back to stock or will I have to use Odin for that?
Abu-7abash said:
Factory reset from Recovery and re-flash Trigger again this time wiping cache, dalvik and fixing permissions after the flash. Now when restoring make sure to check APPS ONLY.
Click to expand...
Click to collapse
You have to remember when you Nandroid it doesnt flash the kernel back so you either need a flashable rom that has a stock kernel or odin back.
the above is correct make sure you do that!
Related
I completely bricked my phone. i was rolling on fr008 and it was working fine. i nandroid packuped, then tried cyanogenmods 6.1.1... it's now bricked and whenever i do a nandroid backup it stays on the loading screen... help anyone?
Can you get into clockwork mod? If so, do a data wipe/factory reset, then clear cache, then on advanced menu clear dalvik cache. Then reinstall latest FR008ddx
tripstermcgee said:
I completely bricked my phone. i was rolling on fr008 and it was working fine. i nandroid packuped, then tried cyanogenmods 6.1.1... it's now bricked and whenever i do a nandroid backup it stays on the loading screen... help anyone?
Click to expand...
Click to collapse
So I am assuming you are able to get into recovery? If so please try to get into the advanced menu and do a "wipe dalvik cache". Next, backup 1 menu and wipe your cache partition and user data, then try and boot your phone. When switching from the FR series to CM or vice versa you need to wipe dalvik and regular cache plus user data. Also when you try and flash roms make sure your phone is not plugged in, clockwork recovery does not work the same when your phone is plugged in. If you flashed CM while your phone was plugged in then you need to attempt to flash again with your phone unplugged.
Thanks guys, that really helped, ill try it know
Thanks for the help guys, but do you know how to get my nandroid backup to work? because its factory reset, and everytime i try to do a nandroid backup i have to repeat this process... help again?
tripstermcgee said:
Thanks for the help guys, but do you know how to get my nandroid backup to work? because its factory reset, and everytime i try to do a nandroid backup i have to repeat this process... help again?
Click to expand...
Click to collapse
Forget the nandroid backup its corrupt
Sent from my Liberty using XDA App
What do you mean it's factory reset? If you restored your phone back to stock I don't believe you can use nandroid. You should be in clockwork recovery to use nandroid. The factory reset/data wipe from recovery does not bother nandroid in any way that I am aware of. Are you trying to restore a nandroid backup?
Sent from my HTC Liberty using XDA App
Eh, oh well, thanks for the help guys, ill start moving everything back....
Dont use clockwork recovery when plugged into your computer, thats the only conclusion i can come up with for why your nanodroid backup is corrupt...
Signatures are fancy.
Yeah... make sure you're unplugged while you're doing this and be sure to wipe the cache as mentioned above. You can then put a rom on your SD and flash again, then go back and flash your favorite rom or go back to factory.
cant stress it enough, read the install instructions and ALWAYS wipe before flashing(or is that flushing? j/k)
anyway, you should be able to Nandroid Restore. and the previous posters were right, the only way to enter recovery properly is with the phone unplugged, then power on holding the volume down key, select recovery and Bingo!!
let us know how you made out
Thanks guys, got everything up and running again, and thanks for the instructions
Sent from my HTC Liberty using XDA App
Hello guys,
My question is what the usefull solution for backup and restore the rom? CWM backup / restore seems not really working well. Xda and custom rom's dev always remind to make a backup, but when u face a problem after flashing rom, you cannot access CWM if you got bootloop, then how to restore? And if you dont like the custom rom that you just flashed for some reason, you might want to restore back to your 'fav' rom.. but unfortunately it's not work as you thought. Sometimes restore failed. Im looking the solution for this..
-restore / backup anywhere without using pc.
-not reflash the rom, this will need to customize it again.. Hassle.
-any android app or android system ability to handle this. If CWM can handle this, then tell me how to restore when u got bootloop and cannot access the recovery mod.
-if there's any other app or method, please suggest them to me.
Any help or idea will be appreciated. Thanks.
Sent from my GT-I9100 using xda premium
When ever Ive made a backup Ive always booted to recovery,"backup and restore" and then "backup".That gives me a full Nandroid backup.As far as the bootloop goes Ive never had a problem to boot to recovery with the 3 button combo.If the 3 button combo works,and its never failed for me then select "backup and restore","restore".Ive also read that reflashing your kernel can solve the problem.I know a simple factory reset can,but not always.
nandroid backup is the best
You can always restore the rom when you can access the recovery mod. If you are a flasholic, you cant escape from bootloop and no recovery mod. My odin binary counter now up to 539.. Nandroid backup sometimes got problem.. Let say i made a backup a checkrom, the i flashed miui, suddenly miui got problem, and i get into recoverymod to restore back my checkrom.. When u done restoring, you will be in checkrom but this time its got many problems. Flashing compatible kernel will not solve the problem. The only solution fot me is to reflash it again.
Im not looking for this way, reflash the rom is hassle, sometimes u got bootloop and cant access recovery, then u need to get back home to use computer with odin to flash only kernel.
What else backup method other than nandroid backup.
Sent from my GT-I9100 using xda premium
cooza said:
When ever Ive made a backup Ive always booted to recovery,"backup and restore" and then "backup".That gives me a full Nandroid backup.As far as the bootloop goes Ive never had a problem to boot to recovery with the 3 button combo.If the 3 button combo works,and its never failed for me then select "backup and restore","restore".Ive also read that reflashing your kernel can solve the problem.I know a simple factory reset can,but not always.
Click to expand...
Click to collapse
How if 3button combo no longer work as it always? When theres no recovery mod for you, what will you do then?
Sent from my GT-I9100 using xda premium
neobirdrio said:
How if 3button combo no longer work as it always? When theres no recovery mod for you, what will you do then?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Normally when I flash a ROM over top of another and I know,from other threads,that they are not compatable in terms of insalation and basic use(FCs)then I always do a full wipe (format system/data/cache,battery stats and fact. reset) prior to instalation.With Titanium it only takes a few minutes to reinstall my apps and during instalation there is no conflicting data between the old and new ROM which would cause a major failer to occur.Thats why if something happens the 3 button combo always works cos nothing major has happened.A factory reset and Im done,althought very rare and the nandroid backup is still in the SD if needed.The problem is when there is to many ROMs cluttering the devices system.Ive read that flashing over top of CM7,Lightning and Miui can sometimes be problamatic.
cooza said:
Normally when I flash a ROM over top of another and I know,from other threads,that they are not compatable in terms of insalation and basic use(FCs)then I always do a full wipe (format system/data/cache,battery stats and fact. reset) prior to instalation.With Titanium it only takes a few minutes to reinstall my apps and during instalation there is no conflicting data between the old and new ROM which would cause a major failer to occur.Thats why if something happens the 3 button combo always works cos nothing major has happened.A factory reset and Im done,althought very rare and the nandroid backup is still in the SD if needed.The problem is when there is to many ROMs cluttering the devices system.Ive read that flashing over top of CM7,Lightning and Miui can sometimes be problamatic.
Click to expand...
Click to collapse
Ahaaa! Your description attract me, i think you're right, base on the way you explained about full wipe does make sense to me. The real interpretation of 'full wipe' is including formatting the system?
Maybe I'm doing it wrong here, flashing another rom on top of another. What usually i did is 'full wipe'... This is my step :
1 - clear data/factory reset
2 - clear cache
3 - advance > clear dalvik cache
4 - flash new rom
This is what i did, i didn't format anything as you mentioned above. Is your full wipe method lead to 'fresh install'? Well buddy, could you please note down your full wipe method step by step including format the system? Which step should i do 1st and what step next? Could you?
Thanks, highly appreciated.
Sent from my GT-I9100 using xda premium
Cool.The thing is not all ROMs are compatablie and therefore can cause problems between each other.Your phone holds data from the previous ROM and also your battery collects info and data from each ROM.All this data and info if not cleaned up (and if from various non-compatablie ROMs) will most likely always result in problems.A full wipe,that I will write below is like installing your ROM on a completely clean devive.First of all a nandroid and titanium backup which i explained ealier,I think?
1.Pass the new ROM to internal-SD
2.boot to recovery and wipe cache partition,dalvik cache,battery stats(go back)
3.select "mounts and storage"
4.format cache,system and data (go back)
5.now wipe data/factory reset and your phone is now completely clean
6.now just install your ROM from the internal-SD as normal and I also do another factory reset to avoid possible bootloops and reboot device but if you get one pull the battery or use the 3 button combo to do one.
this full wipe will clean up all system data but will not touch your SD card so your titanium and nandroid backups will not be touched if you should choose to use them.Once I reinstall all my apps again with titanium its a good idea to reboot to recovery and wipe cache partition and dalvik cache then reboot phone.This will help avoid market connetion problems.
cooza said:
Cool.The thing is not all ROMs are compatablie and therefore can cause problems between each other.Your phone holds data from the previous ROM and also your battery collects info and data from each ROM.All this data and info if not cleaned up (and if from various non-compatablie ROMs) will most likely always result in problems.A full wipe,that I will write below is like installing your ROM on a completely clean devive.First of all a nandroid and titanium backup which i explained ealier,I think?
1.Pass the new ROM to internal-SD
2.boot to recovery and wipe cache partition,dalvik cache,battery stats(go back)
3.select "mounts and storage"
4.format cache,system and data (go back)
5.now wipe data/factory reset and your phone is now completely clean
6.now just install your ROM from the internal-SD as normal and I also do another factory reset to avoid possible bootloops and reboot device but if you get one pull the battery or use the 3 button combo to do one.
this full wipe will clean up all system data but will not touch your SD card so your titanium and nandroid backups will not be touched if you should choose to use them.Once I reinstall all my apps again with titanium its a good idea to reboot to recovery and wipe cache partition and dalvik cache then reboot phone.This will help avoid market connetion problems.
Click to expand...
Click to collapse
Omg! I thought you not gonna reply me anymore. Dude, i even copy and paste the whole texts in my note app as my reference on the future. I highly appreciated for your efforts into this. Thanks for those details.
Check your PM.
Sent from my GT-I9100 using xda premium
Wasnt going to leave out in the cold mate,was just a bit busy.Thanks for the PM.Glad I could help
Hey guys,
I was just wondering what the general consensus is on which recovery is the most preferred.
I was using TWRP 2.6, but that gave me problems (being stuck on samsung logo everytime my phone rebooted). Reverted back to 2.5.0.2 and it seems to work fine so far. I did try CWM in the past but for some reason my boot loader would get locked and I would have to ODIN back to stock.
So what's your preferred recovery and why?
Thanks.
Exodus885 said:
Hey guys,
I was just wondering what the general consensus is on which recovery is the most preferred.
I was using TWRP 2.6, but that gave me problems (being stuck on samsung logo everytime my phone rebooted). Reverted back to 2.5.0.2 and it seems to work fine so far. I did try CWM in the past but for some reason my boot loader would get locked and I would have to ODIN back to stock.
So what's your preferred recovery and why?
Thanks.
Click to expand...
Click to collapse
I like TWRP. It works well with the new phone and Roms that are coming out plus it is so easy to use. Never liked CWM very much. You did right by reverting to an older version of TWRP I had to do that once.
TWRP... i don't even consider anything else.
Do you guys know why my phone gets stuck on the samsung logo everytime i restart my phone?
Doesn't matter what ROM i use it always happens....
Did you do a factory reset, system wipe, preload wipe, cache wipe, and dalvik wipe? Or try fix permissions from recovery?
If not, go do all of those.
If that doesn't work, something is missing from the system partition that is keeping it from booting. Which means you deleted it. :good:
Dubbsy said:
Did you do a factory reset, system wipe, preload wipe, cache wipe, and dalvik wipe? Or try fix permissions from recovery?
If not, go do all of those.
If that doesn't work, something is missing from the system partition that is keeping it from booting. Which means you deleted it. :good:
Click to expand...
Click to collapse
I did ALL of those, still have the problem.
So.... I just ODIN-ed back to stock and going to root and basically re-do everything -_-
Hi all,
I'm having a very strange issue with my i9300 today. I left it charging switched off overnight, and when I tried to switch it back on, it hangs on the Samsung bootscreen. I thought it was odd, but solvable. I went into recovery to try and reflash with the backup I have stored on my sdcard, however when it tried to wipe /Data, it rebooted and hung on the bootscreen again.
I initally had CWM 6.0.4.4 recovery installed, however I have tried PhilZ and TWRP to no avail. All three reboot on flashing /Data.
Anyone have any ideas?
For information, I was running 4.4 KitKat Unofficial. If you need any more information (preferably what can be pulled in Recovery/Download), I'll be happy to post it.
I need my phone running back normally ASAP!
Hi just a little confused..When you say all three reboot on flashing data do you mean data from your backup? If so your backup might be corrupt have you tried doing a clean flash with another rom or tried returning to stock?..Also if you don't want to lose data stored on your backup you can try flashing the original rom that you where on when you made the backup then using philz recovery in advanced settings/ restore you can then just restore data from your backup not the whole rom...And try formatting data system and cache but don't forget this will leave you without a rom so have one ready to install on your sd card....Hope all that makes sense
tallman43 said:
Hi just a little confused..When you say all three reboot on flashing data do you mean data from your backup? If so your backup might be corrupt have you tried doing a clean flash with another rom or tried returning to stock?..Also if you don't want to lose data stored on your backup you can try flashing the original rom that you where on when you made the backup then using philz recovery in advanced settings/ restore you can then just restore data from your backup not the whole rom...And try formatting data system and cache but don't forget this will leave you without a rom so have one ready to install on your sd card....Hope all that makes sense
Click to expand...
Click to collapse
Sorry, I should have been clearer. I was trying to Format the /Data partition in recovery in preparation to restore the backup, and every time a Recovery attempts to Format the partition the phone reboots.
I understand now thanks..Mmm..If you can't format data I would probably just flash stock again with Odin get your phone stable, then try to restore your backup...
tallman43 said:
I understand now thanks..Mmm..If you can't format data I would probably just flash stock again with Odin get your phone stable, then try to restore your backup...
Click to expand...
Click to collapse
Bleh. Returning to stock didn't work. It went past the bootscreen to the green android loading bar screen, went part way then rebooted, and stuck on boot again. >.>
Stickied faqs and guides .
But first what does Product Code say in download mode .
Originally Posted by tallman43<br />
I understand now thanks..Mmm..If you can't format data I would probably just flash stock again with Odin get your phone stable, then try to restore your backup...
Click to expand...
Click to collapse
<br />
<br />
Bleh. Returning to stock didn't work. It went past the bootscreen to the green android loading bar screen, went part way then rebooted, and stuck on boot again. >.>
Click to expand...
Click to collapse
You now have to go to recovery and wipe data/factory reset, wipe cache and reboot. It'll most probably work.
Sent from my silky smooth Samsung GALAXY S3
Rayan28 said:
You now have to go to recovery and wipe data/factory reset, wipe cache and reboot. It'll most probably work.
Sent from my silky smooth Samsung GALAXY S3
Click to expand...
Click to collapse
Ah, that would make sense. I'll give that a try now.
Nope. It's still hanging on the Samsung Bootscreen. Sigh.
I think I'm resigned to the fact I'm going to have to replace this. Most likely with a Nexus 5. Oh well. That sets back some of my luxury spending for the month again.
TermyJW said:
I think I'm resigned to the fact I'm going to have to replace this. Most likely with a Nexus 5. Oh well. That sets back some of my luxury spending for the month again.
Click to expand...
Click to collapse
Are you even flashing the correct ROM for your device with the correct model number? If yes, redownload the ROM. It could be a bad download. This time try the latest 4.3 Jelly Bean.
Hi my data/cell services completely stopped working all of a sudden and I need to get the phone to complete stock.
I have tried flashing a restore through odin but it is not working. Any thoughts or help?
Something has been going around where CM10.2 has borked a lot of Note2s...
Flash a touchwiz based rom, stock if you got it.
in settings go to backup & recovery and factory reset from there.
when it boots again it should work.
if you get into a boot loop wipe data/factory reset in cwm.
DaPoets said:
Something has been going around where CM10.2 has borked a lot of Note2s...
Flash a touchwiz based rom, stock if you got it.
in settings go to backup & recovery and factory reset from there.
when it boots again it should work.
if you get into a boot loop wipe data/factory reset in cwm.
Click to expand...
Click to collapse
I tried that and it didn't fix it so I odin'd back to stock but even that hasn't worked
Hope you used pit file along with stock rom in odin
Sent from my SCH-I605 using XDA Premium 4 mobile app
jbeastafer said:
I tried that and it didn't fix it so I odin'd back to stock but even that hasn't worked
Click to expand...
Click to collapse
If after you are true stock and unrooted, did the factory reset in backup & recovery, and it's still borked, I would go ahead and run CASUAL and see what that does then if it doesn't work then pull the battery and sim, turn phone back on while pressing up volume, home, and power to get into CWM and do a data wipe factory reset there.
Be sure you are using the correct stock rom though... if you are unsure just flash different ones...