Hi, I want to connect my Mozart to my cars auxiliary input but I've no idea what lead to get, I got a lead today that only plays sound through the right hand speakers. I've looked at sites like Maplins and see there's various numbers of poles, the lead I got has 2 poles, any ideas which one I need?
Thanks in advance
Hi.
I just use a standard 3.5mm to 3.5mm lead to connect from headphone socket on Mozart to cars 3.5mm aux input. Works fine.
Point to note tho, if I keep my case on when I connect it, it doesn't connect properly and only plays music out 1 speaker.
Sent from my 7 Mozart T8698 using XDA Windows Phone 7 App
Problem sort of solved, appears the problem lies within the circuit board of connector box of the car, would be so much easier if I could just use the empty usb socket but hey ho
Related
Hi all, I seem to recall reading a post from someone who was suffering the same problem quite some time ago now, but I'll be damned if I can find it.
Basically my official HTC headphones worked well for a while, then I butchered them to solder on a 3.5mm female adapter. These worked correctly for some time then suddenly the headphone adapter miniUSB connection became a bit dodgy. One minute I'd be in work sneaking a quick episode of Kyle XY in, then suddenly the minutest touch of the mini-USB plug and sound is blaring out of the phone's internal speaker... not good! It would appear the connection of the miniUSB plug has become a little bit dodgy.
I've now bought a new miniUSB > 3.5mm female adapter from Expansys, and although better initially, the connection via the miniUSB jack is progressively getting worse. The slightest touch of the jack and sound is blaring out of the speaker. I'm assuming the contacts between the miniUSB jack and the phones' femail miniUSB connector are a little flaky for some reason.
Anyone have any experience of this, and any ideas how to resolve it?
open it up and learn how to solder..
if the contacts to the board are broken, solder them back. problem solved
if the jack itself is damaged, buy a broken 8525 or just the board, and switch the jacks. problem solved
help me out guys
i have just ran into a problem when i downloaded the new jfupdater update cupcake and now the headphone adapter doesnt work anymore can anyone help me out with this and let me know if they have ran into the same problem or if you have any ideas
Guys,
I bought a cradle from ebay (leeonline) because I cannot get a 4 in 1 adaptor from HTC. I tried using the vga-out (17 inch CRT Monitor), rca video out (our Television Set), Brandless USB hub, Generic/standard USB Keyboard and Generic/standard USB Mouse on it all at the same time. Everything works.
Now, I really no longer bring my laptop to work. My athena is all I need for Word Processing, Spreadsheets etc. There are quirks though. Sometimes, the mouse stops working or the athena hangs. (It may be the amount of programs installed.) Then again, It is still faster to boot than my laptop. The other downside is that even with the cradle plugged to the adaptor, It will still consume energy from the battery of the unit.
What I have done to my athena may not be new to most people but I would like to hear from other people what attachments or modifications they have done to make their athena more useful and powerful. In this way, we can all benefit from these ideas. Thanks!
Thanks!
yetdy said:
Guys,
I bought a cradle from ebay (leeonline) because I cannot get a 4 in 1 adaptor from HTC. I tried using the vga-out (17 inch CRT Monitor), rca video out (our Television Set), Brandless USB hub, Generic/standard USB Keyboard and Generic/standard USB Mouse on it all at the same time. Everything works.
Now, I really no longer bring my laptop to work. My athena is all I need for Word Processing, Spreadsheets etc. There are quirks though. Sometimes, the mouse stops working or the athena hangs. (It may be the amount of programs installed.) Then again, It is still faster to boot than my laptop. The other downside is that even with the cradle plugged to the adaptor, It will still consume energy from the battery of the unit.
What I have done to my athena may not be new to most people but I would like to hear from other people what attachments or modifications they have done to make their athena more useful and powerful. In this way, we can all benefit from these ideas. Thanks!
Thanks!
Click to expand...
Click to collapse
I used to do that, but the novelty wore off eventually. Now i just bring in a mini notebook. It's easier than carrying loads of bits about and connecting things to monitors (though that option is still there if necessary).
Pretty cool though if you like your gadgets.
Leoni is correct, however he can always leave the other stuff connected to the cradle and use it sorta like a docking station, but you would need a second cradle for the home TV. I'm glad this thread started because I myself was considering getting one for my TV. However, what should I do about the audio coming from my device (will I still be able to connect audio to my AV receiver)? As far as the 4 in 1 cable I would be able to get to the audio jack on the Athena however the down side is that not all USB flash drives would be supported with the 4 in 1 cable. Yetdy can you tell me how you work around getting audio streamed?
I think there are a few ways to stream audio.
#1 S-Video if I'm not mistaken is supposed to stream audio to your TV.
#2 Audio Jack to RCA Audio converters connected directly to the TV or amplifier would also help assumming you are using the 4-in 1 adaptor. Cradle cannot help you out with this option.
#3 Of course there is bluetooth connection which is what I am going to use. Got a bluetooth transmitter and receiver from ebay but is currently busted (bad seller). Another is to get a BT that has a changeable earphone/buds. Change the earphone to an audio jack to RCA Audio jack and follow #2.
Hope this helps.
yes and no
yetdy said:
I think there are a few ways to stream audio.
#1 S-Video if I'm not mistaken is supposed to stream audio to your TV.
****You are mistaken, S-video is video only (the pins are luminance, chroma, ground and something else I can't remember off the top of my head) ****
#2 Audio Jack to RCA Audio converters connected directly to the TV or amplifier would also help assumming you are using the 4-in 1 adaptor. Cradle cannot help you out with this option.
****if it is anything like the one I got from ebay then no, as it covers up the headphones out port from the athena but does not replicate it on the back ! the athena also carries audio out from the same USB connector that you charge it from (this is why the socket on the athena is an unusual/different shape compared to your plug on USB charger) if they had replicated this port propely on the dock then you could have got audio out that way, but the dock connector for that is also wrong (standard USB shaped socket, not the odd one from the athena) ****
#3 Of course there is bluetooth connection which is what I am going to use. Got a bluetooth transmitter and receiver from ebay but is currently busted (bad seller). Another is to get a BT that has a changeable earphone/buds. Change the earphone to an audio jack to RCA Audio jack and follow #2.
****it is feasible to have the athena transmit stereo bluetooth to a nearby device !****
Hope this helps.
Click to expand...
Click to collapse
just my 2 pence worth
If you want to play audio on your home theatre speaker, you could also consider the option of plugging an FM transmitterinto the headphone jack, then use your FM receiver to play through your theatre speaker.
That was how I used to play my music in the car, through the car's srereo speakers.
eaglesteve said:
If you want to play audio on your home theatre speaker, you could also consider the option of plugging an FM transmitterinto the headphone jack, then use your FM receiver to play through your theatre speaker.
That was how I used to play my music in the car, through the car's srereo speakers.
Click to expand...
Click to collapse
wont work if the Athena is in the ebay dock/cradle, as it covers up the audio out port, but does not replicate it.
Ice coffee,
Maybe you can share some other options here. You may have other ideas that may be useful to us. I just got my athena last month and cradle last week so I cannot really say with authority what it can and what it cannot do. If you can help us out in maximizing the athena with its cradle, many will appreciate it.
None of the video outputs from the 4-in-1 carry audio, the only options are BT a2dp or the headphones jack. Seems a bit long-winded to me though - I'm sure there are less fiddly mods out there. I just used to use the magnetic keyboard as a stand, slipped a BT keyboard over the top of it and the 4-in-1 for usb hub etc. This left a free audio jack to use as I wished. Seems like the docking station is more of a hindrance than a help.
HTC Advantage
Docking station
Keyboard
Mouse
Hifi Bluetooth A2DP adaptor
USB Hub....
I think my EEE pc is a more convenient device on the whole than the above setup would've been if i'd carried all that with me I wouldn't have had any space to fit my work stuff!
I came accross another docking station for $119.00 USD that has the audio option on the side along with 2 standard USB ports instead of 1. I think it's a bit too pricey, due to the fact that on flebay they do have a2dp stereo bluetooth adapters for like $50 USD. Besides with that and your bluetooth headsets it might still be possible to answer a incoming phone call on your bt headset without having to hear the audio coming from your A/V receiver (considering you left the phone on). Leoni, both options have their own drawback (no powering source with the 4 in 1 cable for all USB storage devices and the inaccessable headphone jack when using the docking station). But anyway I'm going to order the 4 in 1 cable too and see which one works best for me on a day to day use.
as I said the only simple option is to use bluetooth and as tootalk2000 pointed out you can get adaptors on ebay for £25 ish, I suppose the other more complicated option would be to, take your cradle apart and replace the USB connector into the phone with this,
http://cgi.ebay.co.uk/2in1-Audio-US...oryZ3728QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
and then take the other end of this apart and make it fit in your cradle, it would actually be quite easy to do as there is a lot of space in the cradle.
ice_coffee said:
as I said the only simple option is to use bluetooth and as tootalk2000 pointed out you can get adaptors on ebay for £25 ish, I suppose the other more complicated option would be to, take your cradle apart and replace the USB connector into the phone with this,
http://cgi.ebay.co.uk/2in1-Audio-US...oryZ3728QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
and then take the other end of this apart and make it fit in your cradle, it would actually be quite easy to do as there is a lot of space in the cradle.
Click to expand...
Click to collapse
Awwwww shux, someone just gave me some experimenting to go do. I'm ordering one of those jacks today, and hopefully it will come around the same time as cradle. I'll just super glue it to the back portion of the cradle and plug it in externally. Due to the fact that the USB port is still on there you would still be able to sync even when the ear phone jack is still in use.
tootallk2000 said:
Awwwww shux, someone just gave me some experimenting to go do. I'm ordering one of those jacks today, and hopefully it will come around the same time as cradle. I'll just super glue it to the back portion of the cradle and plug it in externally. Due to the fact that the USB port is still on there you would still be able to sync even when the ear phone jack is still in use.
Click to expand...
Click to collapse
lol my thoughts exactly.
I've got a USB charging cradle in my car which works fine.
I use a 3.5mm cable to connect my mp3 player to the car stereo which works fine.
I tried playing music from my HD to the stereo whilst charging and I get awful white noise and a constant pinging noise. If I take the phone off the charger it works fine. I can't find anything in the wiki or forums and I've seen some people on other forums with the same problem.
Anyone know what is wrong with this setup or I need a different spec cable (I guess its a standard stereo 3.5mm cable, so 3 contacts and I think the HTC one has 4 coz of the mic, but it works fine when I stop charging it. I guess it could also be a problem with the pins on the USB charger, but I thought the HD didn't have the extUSB connection.
I'm off to the USA on Sunday with a hire car so it would be really handy to be able to charge and play music!
Hello,
I've bought Touch HD without headset and after few days I've bought headset too. But unfortunately I recognise that it is headset for Diamond (via usb, not mini jack) and my phone shows that I can't use this headset.
Is there any possibility to break that blockade and use that headset?
Thanks for help!!!
Ah, I just gave my Tytn Headset a go, and it gives the same warning message telling me its not supported and i have to remove it.
The hardware may not actually be capable of using the socket for audio, you're probably better off getting another actual 3.5ml Jack headset.
But in ported android for blackstone you can chose, which headset you want to use, so hardware is O.K.
I think that it is matter of changing registry but it's only my prediction
interesting. Did you actually get an ext-usb headset working with Android?
i've tryed the htc cable extusb-rca , to use the blackstone like an mp3 player in my car, with the aux-in of the original radio...but it doesn't work :-(
i must use just the 3,5mm jack....
does someone have news about this?
Hey
I've just tested my micro USB headset that i have from O2 XDA Zest and it doesn't work on HTC Touch HD (Windows Mobile 6.5)
if the touch hd's extusb connector does not support tv out or audio out, what is the point of giving it an extusb connector at all, a normal mini-usb would have done.
i would love to get a docking station like this: http://cgi.ebay.de/System-S-USB-Cradle-Dock-HTC-Touch-HD-Pianolack-/350303026359?pt=Handy_Zubehör but that would require the extusb actually working and being able to be split up into 3.5mm audio and normal mini usb.
I was at work the other week and had a slight problem.. how the hell do i get music from a TG01 into a sound desk.. I tried to use the micro USB to 3.5mm adapter with a 3.5 to 3.5mm cable into the desk AUX input, we also tried using a 3.5 to RCA cable... the final thing we tried to make sure it wasnt a problem with the desk was to go straight into the DJ mixer using a 3.5mm cable. nothing worked. but Iphones, Ipod, other MP3 players all work using this method...
any ideas folks?
Have you tested the supplied USB to 3.5mm with a normal earbud? do you get sound out of it?
The USB to 3.5mm cable is just a simple Analog Left/Right/Ground port and so it should work with any Stereo plug regardless of the destination
I suspect that the USB to 3.5mm you used is busted
you can also use a bluetooth adapter with 3,5mm plug, the one i use was 32,- euros and works perfect
Wandy_1974 said:
Have you tested the supplied USB to 3.5mm with a normal earbud? do you get sound out of it?
The USB to 3.5mm cable is just a simple Analog Left/Right/Ground port and so it should work with any Stereo plug regardless of the destination
I suspect that the USB to 3.5mm you used is busted
Click to expand...
Click to collapse
Not at all.
The TG01 does require a certain resistance to be presented to the device and it is this which it interprets as to how to respond.
If the two data lines D- and D+ are shorted, it will go into Charge mode. If it sees a resistance of around 20 Ohms or more it will switch the audio output to the micro USB port. Typical earphones will have an impedance of around 30 Ohms, while the input to many battery powered external speakers is 4 or perhaps 8 Ohms (ever lower on amplifiers). This is why your TG01 worked fine into the earphones but not your external feed.
This texts it's not mine (just the blue one). It was written for the great kevinpwhite, on MODACO some time ago. And it's true (I've made the resistor modification in a set of stereo amplified speakers than failed as Tomsutton said and now they work perfectly.)
You can read the full explanation here: (I'm xdalover on Modaco )
http://www.modaco.com/content/toshiba-tg01-tg01-modaco-com/298887/headphone-amplified-sound-output/
(from post #7)
Have a nice day
Pere said:
Not at all.
The TG01 does require a certain resistance to be presented to the device and it is this which it interprets as to how to respond.
If the two data lines D- and D+ are shorted, it will go into Charge mode. If it sees a resistance of around 20 Ohms or more it will switch the audio output to the micro USB port. Typical earphones will have an impedance of around 30 Ohms, while the input to many battery powered external speakers is 4 or perhaps 8 Ohms (ever lower on amplifiers). This is why your TG01 worked fine into the earphones but not your external feed.
This texts it's not mine (just the blue one). It was written for the great kevinpwhite, on MODACO some time ago. And it's true (I've made the resistor modification in a set of stereo amplified speakers than failed as Tomsutton said and now they work perfectly.)
You can read the full explanation here: (I'm xdalover on Modaco )
http://www.modaco.com/content/toshiba-tg01-tg01-modaco-com/298887/headphone-amplified-sound-output/
(from post #7)
Have a nice day
Click to expand...
Click to collapse
Cheers pete, Il dig out the specs of the desk and see what the resistance is, I dont remember it going into charging mode though..
Why would an Ipod work but the TG01 wont?
tomsutton529 said:
Cheers pete, Il dig out the specs of the desk and see what the resistance is, I dont remember it going into charging mode though..
Click to expand...
Click to collapse
If standard headphones works and aux IN don't work, no doubt. This is the origin of your problem
tomsutton529 said:
Why would an Ipod work but the TG01 wont?
Click to expand...
Click to collapse
Easy, an Ipod has a dedicated analogic output. Instead TG01 has a shared USB port with different uses...
Noticed this on mine when I wanted to play music from the phone on my stereo. VERY annoying, and a bit daft of them to do this, even though it's a shared port.
There should be a software option to enable the usb port for purely sound to allow it to pass it across. I see the hardware resistive work as a workaround not the solution (although well done on getting it working!!)
no way. toshiba support:
"There are no settings available on the phone in order to set up the electrical resistance."
tomsutton529 said:
I was at work the other week and had a slight problem.. how the hell do i get music from a TG01 into a sound desk.. I tried to use the micro USB to 3.5mm adapter with a 3.5 to 3.5mm cable into the desk AUX input, we also tried using a 3.5 to RCA cable... the final thing we tried to make sure it wasnt a problem with the desk was to go straight into the DJ mixer using a 3.5mm cable. nothing worked. but Iphones, Ipod, other MP3 players all work using this method...
any ideas folks?
Click to expand...
Click to collapse
With thanks to Pere for the kind words above re. my earlier explanations on this subject on MoDaCo....
....in addition, please note that all of these charactaristics are an intentional part of the micro USB AB 'On The Go' port design and will become increasingly the norm as more devices adopt uUSB.
There is at least one chip being manufactured, but as yet not available to individual purchasers, which will support an external plug in device capable of providing intelligent charging combined with concurrent audio out. Sort of configuration applicable to eg. a car hands free scenario. I imagine that such add-ons will start to become available in due course - this is one of the drawbacks of choosing what is still a leading edge device well over a year after it first appeared !
For the mixing desk input, I'd suggest using an isolating transformer (eg. these here) as the ideal means of coupling - this will provide the necessary impedance (typically >10kOhms) to make the TG01 respond with an audio output while also ensuring electrical separation and maintaining as high quality audio signal as possible.