Related
XMIUI Play V2_B
Disclaimer
I AM NOT TO BE HELD RESPONSIBLE IF U DAMAGE UR PHONE OR BRICK IT IN ANY WAY SHAPE OR FORM. I HAVE TESTED THESE UPDATES AND CONFIRM THEY WORK ON THE XPERIA PLAY R800I GSM MODEL. IF YOU HAVE ANY ISSUES OR QUESTIONS PLEASE POST AND WE CAN HELP YOU RECTIFY THEM!
What doesn't work?
Bluetooth - Doesnt Start
Hardware Buttons
Touchpads
Torch - Crashes when switching on. (Coming in next build!)
Screenshots - Doesn't capture! (Coming in next build!)
What works?
Boots successfully.
Hardware Accelleration
WiFi
Camera
Data
GSM Calls
Text Messages/MMS
VERY Fast and Smooth
Lockscreen
Themes, Music Player (very loud)
Market
Thanks to....
DoomLord - General kernel issues, help and support
Bin4ry - General help.etc
bheremans - Succesfully getting it to boot on the Ray, help and guidance! Wouldnt be possible without bheremans. Also porting it and fixing everything.
FreeXperiaTeam - Kernel sources!
How to Install
1. Extract this zip to a folder.
2. Copy the MIUIPlayV2_b.zip to your sdcard. (Via USB Storage)
3. Switch off your phone, and hold down search whilst plugging in the USB to enter fastboot mode. (Blue Power Light)
4. Open a command prompt/terminal and enter the following commands:
fastboot flash boot boot.img
fastboot boot recoveryPLAY.img
5. Format Data, Dalvik Cache and Factory Settings:
6. Install zip from SDCard, select MIUIPlayV2_b.zip.
7. Once that has completed, reboot your phone. (But keep connected to usb)
8. Once your phone has been installed you then need to open a terminal/command prompt (in the folder where you extracted the zip) and enter the following commands:
adb install softkeys.apk
9. Now unplug your phone, and slide across to the app Button Savior.
10. Then select "Kill/Start Button Savior Service". You should then see a little arrow at the side.
11. Press that little arrow.
12. There you have your hardware buttons for now. Press the x to hide them.
13. Enjoy your rom!
Download!
http://www.filesavr.com/853HS5A9BXUXZ8H
Screenshots
Coming Soon...
Finally MIUI!
Now all that is needed for me is to contact Alejadrissimo and get my fastboot enabled! :')
Well,congratualations on getting it to work!
However,it would be nice to have a small introduction to what is MIUI...i personally have no idea what it is ??_??
Cat_On_Droid said:
Well,congratualations on getting it to work!
However,it would be nice to have a small introduction to what is MIUI...i personally have no idea what it is ??_??
Click to expand...
Click to collapse
MIUI is a customized themed version of Android which is in the look of iOS.
Which version of MIUI is it?
DeanBoro said:
MIUI is a customized themed version of Android which is in the look of iOS.
Click to expand...
Click to collapse
I thought looking like iOS was one of the many possibilities, and not what MIUI was?
It is the latest version of MiUI (US Build but GSM only). I think it is 1.8.5
XperiaPlayer said:
It is the latest version of MiUI (US Build but GSM only). I think it is 1.8.5
Click to expand...
Click to collapse
newest MiUI is 1.10.x or something... atleast thats the one post in x10 section
Congratulations on making it work!
It seemed like you wouldn't get too much support but devs finally stepped up and helped make it happen. Good luck on improving it and vanish all those "what doesn't work" lines.
netorino said:
Congratulations on making it work!
It seemed like you wouldn't get too much support but devs finally stepped up and helped make it happen. Good luck on improving it and vanish all those "what doesn't work" lines.
Click to expand...
Click to collapse
After Camera and wifi works for me i cant wait to use it
congratulations in getting it to boot
we finally have a real alternative rom, no disrespect to the guys making striped/customized stock roms but i have been waiting for this since day one of purchasing my play, now if the sense rom can get ported too.......
all i need is for data to work and i will gladly flash this
Thanks to....
.....
* Me - For porting it! And sticking with it for a few days
Click to expand...
Click to collapse
Classic
I said that, regardless of how it came up, you deserved credit fit being gutsy and getting to work on it. Now that it appears to work (can't try it ATM) you deserve more credit for delivering. Kudos to you!
Current Progress:
Now onto fixing the WiFi, torch and screenshot capture. I dont know what data is but I also have no data with CM7 FXP41 either, this could be releated because we are using the same kernel (edited a bit) and ramdisk.
Coming in next build:
WiFi
Torch
Screenshot Capture
Custom Bootscreen
UK Version of MIUI (Not the US one, the uk one is more like the real miui and the one you see on most phones.)
Xperia Wallpapers
Data is 3g coverage. It's a deal breaker for many people, so once it's fixed you can safely say you have a stable miui running.
Yeh, I know what data is and this would be like one of the only things left to fix (Most stuff is regarding kernel changes with the code provided.etc). But i also have no APN's or data in CM7 either, so....
Good to hear
I'll just wait till it gets a bit more stable before trying it
Sent from my R800i using XDA Premium App
Any ideas on how are you going to fix the camera?Camera is very important u kno.
I don't know but they are working on it over in the Ray thread. It is something to do with the fact that because we cant get the source code for MIUI, we have to sort of hack the precompiled camera libary to link it with the kernel we have compiled...
Cat_On_Droid said:
Any ideas on how are you going to fix the camera?Camera is very important u kno.
Click to expand...
Click to collapse
oh boy... you should been on the X10 community...
This is MIUI for the Droid 2 Global. You will need to be on Gingerbread .606 or .607 before installing any build after 1.9.16!
Currently everything is working except the alt lock key. Bluetooth should be working now too (please let me know if it is/isnt)
It is highly advised to have your phone activated before installing this rom
Get the update from MIUI.US' download page
http://roms..miui.us
(Mirror)
http://roms.miui.us/...e=cdma_droid2we This is a direct link to the rom on MIUI
Droid 2 Global 1.10.21
http://www.multiupload.com/GUZ75UEDX8 (Test rom with Bluetooth working and updated init (less sticky settings))
Changelog:
Updated to 1.10.21
FINALLY Switched to Defy Base
Updated to Android 2.3.7
Included governors and scripts from Droid X Chat
Included Bootmenu
Brought in changes over 1.9.16.1 (Any GSM tweaks you guys were using before should still work)
Includes MIUI Control now
Speed increase
Included smartass governor and others
Note: The 2 usb icon's is not an issue, it is due to the new usb toggle
Notes2: Over the next few releases I will be doing a freeze on adding new features and trying to get Bluetooth to work and fix some other small issues
Notes 3: You will most likely need to wipe data and cache for this update due to our base switch! (should be the last switch in a long time!)
Notes4: The phone is underclocked to 1 Ghz by default! Go into the boot menu and set the voltage and cpu speeds you desire. you can also set the governor to use here too!
To get to the boot menu press volume down when you see a blue light come on at boot!
http://www.multiupload.com/CO1B24CE4U (1.10.21 GB)
http://www.mediafire...7xkg88bx99wod1y MIUI4D2G V 5.0 (froyo)
http://www.mediafire...aexgk9sercps8qn Overlay I am using incase I ever quit (for reference) (5.0 Froyo overlay, DO NOT USE FOR NORMAL INSTALLS OF MIUI, THIS IS FOR DEVELOPERS ONLY)
Note: If you try to switch network versions you will need to erase /system/ /data/ and /cache/ and then install whatever version you want. It caches whatever mode you are in and that will cause problems if you do not follow the method listed above.
You can use recovery! Go to the rom manager and in there install droid x (2nd init) and then it should work! That is apparently the only way to get there.
Dont forget to clear data and cache after installing or else you WILL have a bootloop
Donations are MUCH appreciated!
http://forum.xda-dev...e.php?u=1894713 ( I simply copied my XDA donate link)
Thanks go out to CVPS,Framework43, Revnumbers, Gasai Yuno, Asphyx, x13thangelx, Bikerdude and the rest of the CM4D2G team!
Thanks also go out to the person who made the MIUI honeycomb theme that is used in V5 as default!
HUGE thanks to Droid X Chat for the work I borrowed from him! (bootmenu, user init's, etc.)
Reserved
Also, please donate if you think my ports have made your phone a better device! Not asking out of greed but because I have spent so much time on this rom (quite literally if I quantified it, I would have almost a months worth of workdays in it)
i have been meaning to try this rom out. how well does it work.
i am on a .608 update would it still work with my phone?
awesome rom. i like it way better then other ones i have had on my phone.
Works pretty well. Only bugs are BT, a couple sticky settings and alt lock key. The BT and a few more sticky settings will be fixed this upcoming update (likely around sunday or monday). I hit the same performance of around CM. Slightly lower because MIUI is a heavier rom but it is faster than Blur. It gets slightly less battery than blur but better than CM.
Despite repeated efforts .. when I flash rom it boots to white motorolla
icon and never goes past. Sbf. 607. Wiped cache factory reset before and after flash
Sent from my DROIDX using XDA App
MrRedPants said:
Despite repeated efforts .. when I flash rom it boots to white motorolla
icon and never goes past. Sbf. 607. Wiped cache factory reset before and after flash
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
If you boot to a white moto screen, then you never updated to GB. Most GB updates on Moto devices have a red logo.
krazyazy said:
If you boot to a white moto screen, then you never updated to GB. Most GB updates on Moto devices have a red logo.
Click to expand...
Click to collapse
You hit the nail on the head! You need to be on gingerbread at first. With the updated band unlock that exists on rootzwiki you don't need to be on froyo for anything at all anymore. Also I updated the OP with an updated 1.10.21 with working Bluetooth and fewer sticky settings
ALT lock dosnt work on. it isnt big problem but its a bug .
Everything else work well for now.
I like MIUI, but I have GPRS and bluetooth problems on this rom, so I keep waiting for the new release.
eddyzenl said:
I like MIUI, but I have GPRS and bluetooth problems on this rom, so I keep waiting for the new release.
Click to expand...
Click to collapse
forced when trying d GSM fix (airplane mode method)
This is a MIUI GB 2.3.xx rom ported from stock ZCPK9(China version) rom with miui patchrom.
---FLASH AT YOUR OWN RISK---
I'm now busy preparing for college entrance exam so I won't (perhaps) continue develop before I get into college
Not working:
GPS(Don't know why)
Not perfect:
Theme
DownloadProviderUI
SideKick
ClockPackage
Default language is Chinese.
App2SD(Cause reboot every time when you switch an App between SD and internal memory but actually it has operated successfully)
Ugly statusbar transparent.
Not proted now(All using stock one):
MIUI Settings
MIUI Camera
MIUI SoundRecorder
MIUI SuperUser
MIUI FileManager
MIUI Browser
MIUI Gallery3D
(And some other MIUI apps)
Features:
All MIUI features except that mentioned above (plus that I forgot and not find).
GUI installer by Aroma.
Optional Ad-hoc patch, Gapps, no keyboard light patch, USA keyboard patch.
Something wonderful:
Press home at lock screen to turn on torch.
Press home + back at same time to take screenshot.
Press menu + volum up to turn background light max(temporary).
Thanks to:
Myself , MIUI team and friends at XDA and Sdapk.
How to install:
1. Make sure you have rj's or Entropy512's installed. This rom does not contain kernel.
2. Download rom and place in your sdcard.
3. Reboot into recovery.
4. Wipe /data as well as anything else if you are first install this rom.IMPORTANT!
5. Choose install zip and this will start Aroma Installer.
6. Choose any patch you like in Aroma Installer and finish install it.
7. You will reboot automatically.
8. Be patient while first boot up.
9. Congratulations!
Screenshots:
Change log:
Code:
MIUI.2.3.xx.Noisyfox.01b
Fixed FC when headset plug in
Add USA keyboard patch
MIUI.2.3.xx.Noisyfox.01a
Fixed Settings Fail After Wipe /data
MIUI.2.3.xx.Noisyfox.01
Initial Release
Download:
https://github.com/Noisyfox/patchrom_GalaxyPlayer5.0/downloads
Develop:
If you are interested in this project, you can get fully source code from here:
https://github.com/Noisyfox/patchrom_GalaxyPlayer5.0
Hey how do we change it back to English in this ROM? And what do you mean by "Theme" is not working perfect? It is working partly or are there any bugs!
Thanks
Rom is perfect for me , but slow .
I have INTL device , which kernel is better for me Rumirand's or your patched kernel?
anil_kilic said:
Rom is perfect for me , but slow .
I have INTL device , which kernel is better for me Rumirand's or your patched kernel?
Click to expand...
Click to collapse
rj's is better.
pmdisawesome said:
Hey how do we change it back to English in this ROM? And what do you mean by "Theme" is not working perfect? It is working partly or are there any bugs!
Thanks
Click to expand...
Click to collapse
It works partly.
This is sweet, good job!!
I followed instructions to the letter. Seemed to flash fine but it is now sitting at the black Samsung screen screen for about 20 minutes. How long has it taken for 1st boot? Tried re-flashing, clearing cache, etc.
change your kernel to rj's kernel and flash again.
rj's kernel says it is for International SGP not US. My SGP is US so I am not sure if this kernel will work.
tsg2513 said:
rj's kernel says it is for International SGP not US. My SGP is US so I am not sure if this kernel will work.
Click to expand...
Click to collapse
Dont install . rj's kernel is for only INTL devices . Sorry i think your device is INTL and replied.
could you make a port for the 4 inch sgp?
I have the same problem as tsg2513, it sits at the Samsung logo and does nothing. I have a USA SGP5.0 and I flashed entropy's kernel right before I flashed the MIUI.
mrjaredbeta said:
I have the same problem as tsg2513, it sits at the Samsung logo and does nothing. I have a USA SGP5.0 and I flashed entropy's kernel right before I flashed the MIUI.
Click to expand...
Click to collapse
figured it out. i have a USA device as well and had the same issue. It was also strange as to why the flashing process only took like 5 seconds....
i flashed rj's kernel (so my buttons stopped working) then i restarted recovery just so the changes get applied. then i proceeded to flash miui. just make sure in the install options you selection USA keyboard patch and the install process should take much longer (that means its working) and bam.
EDIT: ok so the buttons light up but they still don't work. after booting to miui and sat at the homescreen for a minute or two, reboot and flash entropy's kernel.
raishiro said:
figured it out. i have a USA device as well and had the same issue. It was also strange as to why the flashing process only took like 5 seconds....
i flashed rj's kernel (so my buttons stopped working) then i restarted recovery just so the changes get applied. then i proceeded to flash miui. just make sure in the install options you selection USA keyboard patch and the install process should take much longer (that means its working) and bam.
EDIT: ok so the buttons light up but they still don't work. after booting to miui and sat at the homescreen for a minute or two, reboot and flash entropy's kernel.
Click to expand...
Click to collapse
Are you saying that after you re-flashed entropy's kernel the buttons work? Also, have you checked to see if the GPS works?
i flashed entropy's kernel after miui successfully boot up in order to get my buttons to work again, so yes
raishiro said:
i flashed entropy's kernel after miui successfully boot up in order to get my buttons to work again, so yes
Click to expand...
Click to collapse
Great! Can you please check if GPS works?
Google Maps works, just cant get a lock on Navigation. also, just discovered that the launcher restarts whenever you try to turn on usb storage with your cable plugged in...preventing you from accessing your files on your computer
raishiro said:
Google Maps works, just cant get a lock on Navigation. also, just discovered that the launcher restarts whenever you try to turn on usb storage with your cable plugged in...preventing you from accessing your files on your computer
Click to expand...
Click to collapse
Yeah, I just flashed it a little while ago. Everything looks really good expect for a few small problems (as you mention) which I can live with but I really need the GPS to work to consider this my dailer driver. Here's to hoping someone can get it fixed.
tsg2513 said:
Yeah, I just flashed it a little while ago. Everything looks really good expect for a few small problems (as you mention) which I can live with but I really need the GPS to work to consider this my dailer driver. Here's to hoping someone can get it fixed.
Click to expand...
Click to collapse
Anyone know how to get the GPS working?
So after a couple of hours searching the web, it may be that the GPS problem is inherent in MIUI 2.3.
I recently reverted back to stock Bell Atrix firmware (rooted) . I cannot find a setting to stop the volume keys from waking the screen up. Is this not part of the stock firmware? Is there a. MOD that I could use? Everything I search for shows me enabling mods, but not disabling.
Thanks
To my knowledge no stock firmware has the wake-on-volume feature by default. You must've either flashed a mod or flashed a ROM that has the mod included. Try looking for an unmodded fruitcake.
ravilov said:
To my knowledge no stock firmware has the wake-on-volume feature by default. You must've either flashed a mod or flashed a ROM that has the mod included. Try looking for an unmodded fruitcake.
Click to expand...
Click to collapse
I didnt flash any mods. Just flashed the stock atrix firmware and rooted. Then i noticed that the volume keys wake the screen up.Thanks
You are right. I did install "no lock" from the market. That is waking up the phone with volume key. So I guess this is only possible on a custom rom?
HI
SINCE NOONE WORKS ON MODIFICATIONS OF ROMS FOR OUR DEVICES, HERE IS ONE FROM MY TREASURY.
I HOPE THAT THIS MOVE WILL ENCOURAGE PEOPLE TO DO THE SAME.
GOAL IS TO CHANGE LOOK, FEEL, AND APP FUNCTIONALTY OF OUR DEVICES.
STOP TALKING, LET'S SEE:
Features:
Rooted out of the box
deodexed
init.d support
busybox
removed bloatware
changed boot/shutdown animation
modded (light) systemui,framework,contact etc.
with built in
potato gradient
quicklaunch
3minit battery
added some useful apk's like
appolo
quick boot
battery bar
and Airidosas252 kernel V0,3
And minimal other changes, to make space for mods.
How to install:
Make CWM backup
Copy maxx05.zip to your sd card (external_SD)
option 1. CLEAN INSTALL:
Make factory reset, clean dalvik cache
Install ROM
Reboot
Dont scare, first boot take up to 10 min...
option 2.INSTALL WITHOUT FACTORY RESET (TO PRESERVE APPS AND DATA)
(I can't guarantee stability)
Clean cache, clean dalvik cache
Install ROM
Reboot
After bootup, make changes in Potato gradient, to avoid black background of statusbar (make it transparent if you wish).
HAPPY FLASHING, AND GO ON, MAKE YOUR OWN MODS (AND SHARE)
Thanks to creators of:
Archie kitchen: http://forum.xda-developers.com/showthread.php?t=2597220
SuperSU: http://forum.xda-developers.com/showthread.php?t=1538053
potato gradient: http://forum.xda-developers.com/showthread.php?p=52126045#post52126045
3minit battery mod: http://forum.xda-developers.com/showthread.php?t=2799958
3minit quick launch: http://forum.xda-developers.com/showthread.php?t=2650117
Airidosas kernel: http://forum.xda-developers.com/optimus-l3-l5-l7-l9-ii/general/p710-p713-p714-kitkat-kernel-lg-optimus-t2889120
DOWNLOAD:
https://drive.google.com/file/d/0B-hQuq22T56SeG5SNDRVNFEtMGM/view?usp=sharing
OR:
https://www.dropbox.com/s/54l08qmjhae1n1w/maxx05.zip?dl=0
Screenshots:
Reserved
link:https://yadi.sk/d/d6hiVX3EcehtC
Awesome work Maxx
Not bad
Amiga500 said:
Awesome work Maxx
Click to expand...
Click to collapse
the_vanya1 said:
Not bad
Click to expand...
Click to collapse
the_vanya1, your work is holy bible for modding L7II, so...
BIG THANKS
Is it possible to use your rom but with unmodified systemui, framework etc? If so, what should I replace? I want to check it out, especially the LED function.
SoulrainFalls said:
Is it possible to use your rom but with unmodified systemui, framework etc? If so, what should I replace? I want to check it out, especially the LED function.
Click to expand...
Click to collapse
Yes, just rewrite my LGSystemUI, framework-res, and lge-res, with stock and deodexed versions of them, change prmissions to -rw-r--r-- (like other files in folders).
And delete 3minit/potato gradient from system/app (com.three.minitbatterysetting, and com.potatogradientapp).
Please, post result here.
Unfortunately
I flashed your rom as it is, without changing anything. Just to prevent making any mistake from my part. I can confirm that the LED still doesn't work as it's supposed to, at least on my device. The only difference I noticed was that with your rom the LED notifications worked every time I unlocked and then locked the screen without dismissing them while with Amiga's they sometimes did and sometimes did not. The fact is that the LED is supposed to flash by default when the screen is off and the phone is untouched but it doesn't with both roms. So I guess it is a KK bug.
SoulrainFalls said:
I flashed your rom as it is, without changing anything. Just to prevent making any mistake from my part. I can confirm that the LED still doesn't work as it's supposed to, at least on my device. The only difference I noticed was that with your rom the LED notifications worked every time I unlocked and then locked the screen without dismissing them while with Amiga's they sometimes did and sometimes did not. The fact is that the LED is supposed to flash by default when the screen is off and the phone is untouched but it doesn't with both roms. So I guess it is a KK bug.
Click to expand...
Click to collapse
Really dont know what to say, because, on my device, LED notification works normaly, eg, in the morning (loooong screen off) I allways see happy flashes on it. You have P710?
maxx_hr said:
Really dont know what to say, because, on my device, LED notification works normaly, eg, in the morning (loooong screen off) I allways see happy flashes on it. You have P710?
Click to expand...
Click to collapse
Might be kernel related or system related. Why? How is the led turned on? It has a driver that turns red blue or green at an intensity. So kernel might be buggy or system might use it just bad. Try with stock kernel if you are using a modded one if you want to debug it. If it doesn't work it's OS related something is messing up the notification usage.
maxx_hr said:
Really dont know what to say, because, on my device, LED notification works normaly, eg, in the morning (loooong screen off) I allways see happy flashes on it. You have P710?
Click to expand...
Click to collapse
Yes, I do have a P710. It would be nice if there were many more checking your rom, so there would be more results. Could there possibly be minor hardware differences between bunches of the same model? I don't know what to think. It's a shame because you people create roms with hard work and we can't use them properly.
SoulrainFalls said:
Yes, I do have a P710. It would be nice if there were many more checking your rom, so there would be more results. Could there possibly be minor hardware differences between bunches of the same model? I don't know what to think. It's a shame because you people create roms with hard work and we can't use them properly.
Click to expand...
Click to collapse
@SoulrainFalls I honestly doubt there is any hardware difference. Hmmm what kernel do you have? Also an app or anything can basically mess up the usage of LED.
christi9503 said:
@SoulrainFalls I honestly doubt there is any hardware difference. Hmmm what kernel do you have? Also an app or anything can basically mess up the usage of LED.
Click to expand...
Click to collapse
Both this rom and Amiga's use Airidosas252 kernel. I know about apps, that's why I didn't install anything more than K9-Mail and BBM to check. But it seems strange that with JB I had all sorts of apps installed and the LED was fine. And how come the notifications don't work by default but do when I unlock and then lock the screen again? What I can see is that people are having LED problems even with stock KK .kdz. I think LG screwed the update(?) and that's bad for these guys that make the roms.
SoulrainFalls said:
Both this rom and Amiga's use Airidosas252 kernel. I know about apps, that's why I didn't install anything more than K9-Mail and BBM to check. But it seems strange that with JB I had all sorts of apps installed and the LED was fine. And how come the notifications don't work by default but do when I unlock and then lock the screen again? What I can see is that people are having LED problems even with stock KK .kdz. I think LG screwed the update(?) and that's bad for these guys that make the roms.
Click to expand...
Click to collapse
Might be bad update by lg or a glitch in kernel or an app interfering. Anyway this kind of glitches are very very very very hard to trace and debug.
christi9503 said:
Might be bad update by lg or a glitch in kernel or an app interfering. Anyway this kind of glitches are very very very very hard to trace and debug.
Click to expand...
Click to collapse
I agree, hard to trace bug, but, just for to be shure, it will be smart to flash stock KK kernel from SoulrainFalls's country/provider KDZ. No matter wich rom is installed on device.
HELP
Hi i need help.
I upgrade my LG L7 II firmware from 4.1 to 4.4.2 and i'm not satisfied i want to downgrade back to 4.1
how can i do that if it is possible?
maxx_hr said:
I agree, hard to trace bug, but, just for to be shure, it will be smart to flash stock KK kernel from SoulrainFalls's country/provider KDZ. No matter wich rom is installed on device.
Click to expand...
Click to collapse
My P710 came with V10J EUROPE OPEN by default. I'm willing to try what you suggest because it can help others have an answer too but I don't know how to flash just the kernel. Any help would be much appreciated.
Dino971 said:
Hi i need help.
I upgrade my LG L7 II firmware from 4.1 to 4.4.2 and i'm not satisfied i want to downgrade back to 4.1
how can i do that if it is possible?
Click to expand...
Click to collapse
Just flash your original firmware from this page: http://lg-phone-firmware.com/index.php?id_mod=21. Choose one from your country/region/provider, and must be version 10 (JB), NOT 20a (KK).
After flashing you MUST perform factory reset.
SoulrainFalls said:
My P710 came with V10J EUROPE OPEN by default. I'm willing to try what you suggest because it can help others have an answer too but I don't know how to flash just the kernel. Any help would be much appreciated.
Click to expand...
Click to collapse
If you is on v10j, that is JB firmware...
When You flash KK, procedure for stock kernel is:
From the page: http://lg-phone-firmware.com/index.php?id_mod=21, download your country/region/provider firmware 20a kdz.
From tutorial on: http://forum.xda-developers.com/optimus-l3-l5-l7-l9-ii/development/lg-l7-ii-how-to-unpack-kdz-img-t2815176, perform steps from 1. to 10.
Between extracted images, is APPS.
Rename it to boot.img , that is stock kernel.
Place it to your external_SD.
Open terminal (on the phone) and type:
su (after that press enter)
dd if=/storage/external_SD/boot.img of=/dev/block/mmcblk0p9 (and press enter)
If you're not familiar with terminal, download airidosas kernel from: http://forum.xda-developers.com/optimus-l3-l5-l7-l9-ii/general/p710-p713-p714-kitkat-kernel-lg-optimus-t2889120
and replace boot.img in his .zip with your extracted from your .kdz.
Flash zip from recovery
maxx_hr said:
If you is on v10j, that is JB firmware...
When You flash KK, procedure for stock kernel is:
From the page: http://lg-phone-firmware.com/index.php?id_mod=21, download your country/region/provider firmware 20a kdz.
From tutorial on: http://forum.xda-developers.com/optimus-l3-l5-l7-l9-ii/development/lg-l7-ii-how-to-unpack-kdz-img-t2815176, perform steps from 1. to 10.
Between extracted images, is APPS.
Rename it to boot.img , that is stock kernel.
Place it to your external_SD.
Open terminal (on the phone) and type:
su (after that press enter)
dd if=/storage/external_SD/boot.img of=/dev/block/mmcblk0p9 (and press enter)
If you're not familiar with terminal, download airidosas kernel from: http://forum.xda-developers.com/optimus-l3-l5-l7-l9-ii/general/p710-p713-p714-kitkat-kernel-lg-optimus-t2889120
and replace boot.img in his .zip with your extracted from your .kdz.
Flash zip from recovery
Click to expand...
Click to collapse
Unfortunately these steps won't work because I'm on Linux. If anyone knows another way, I'd be happy to check it. Meanwhile, I flashed a couple of different versions of Airidosas kernel and noticed a tiny improvement. First of, with both v0.2 and v0.2.1, in the Home button LED settings the preview worked fine while before it was cut off immediately and second, every time I received a notification, when I unlocked and then locked the screen without even opening the app that sent the notification and without dissmissing it, the LED flashed happily. I checked with both the lockscreen in Amiga's rom and with WidgetLocker.
In conclusion:
1) The LED preview works in the Home button LED settings.
2) The LED notification works when unlocking and then locking the screen without dismissing the notification.
3) The LED stays off when a notification is received and the screen is off, unless 2) happens.
4) The LED works on boot time and while charging.
These are the findings on my device. I don't know if anything makes any sense. Just a thought. I think I read somewhere (correct me if I'm mistaken) that in KK the LED function has been changed and while in JB one would only see the LED flash when the screen was off, in KK the LED notifications work even while the screen is on. Could there be a bug somewhere in this?