Related
Hey guys, I've been searching around the forum and on google the whole night, but haven't managed to solve this problem I'm having.. I'm using Energy rom aug 10th version Cookie gtx.. I'm trying to use my laptop to browse the net using phone as a wireless router. Managed to connect, but it always shows "Limited Connectivity" on my laptop.. Meaning to say, I can't browse the net... I've gone through what some others have suggested eg. turning off "N" mode in bsb tweaks, making sure that the 2 adapters are one "Use server-assigned IP address", making sure that connection is to "The Internet" instead of "Work", updating the drivers for the wireless adaptor on my laptop ... but still, no joy for me... It's been a long time of searching, and I'm pretty worn out, so thought I'd post this question here before I hit the sack.... Anyone knows how I can solve this issue?? Sometimes my home network can be pretty buggy, so I thought that if I could use my HD2 as my router instead, I should at least face lesser problems, but turns out, I can't even connect properly! Help guys... Thanks!
*EDIT* Solved! Peeps who are having issues with using your Leo as a wireless router, follow the steps below!
Note: Credits go to DN41 as he was the one who walked me through it. Please thank him.. =) I'm just posting this as I'm sure that there are others who are also looking for a fix to this.. This may not be the best method, but in my opinion, it's better than no method at all... This should be the last resort if after trying out everthing else, and you still can't get it to work..
First step - On your Leo go to "Settings ---> Wireless Controls ---> Wi-Fi ---> Advanced ---> Adaptor and networks ---> Network Adapters"
You should see the Broadcom 802.11 Network Adapter and also the Broadcom 802.11 DHD Network Adapter...
Tap on them and change both these IP addresses to "Use specific IP address" and punch in 192.168.1.1
When you're done, go out of that screen and it should be saved...
Second step - On your notebook, go to "Network and sharing centre ---> Manage wireless networks ---> Adapter Properties"
Untick the "Internet Protocol Version 6 (TCP/IPv6)"
Click on "Internet Protocol Version 4 (TCP/IPv4) ---> Properties" and click "Use the following IP Address"
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
Preferred DNS Server: 192.168.1.1
Click ok, and then close the box. *NOTE: Do not use alternate IP's etc. It won't work.*
Start your Wireless router on your Leo and wait for it to start up, and from here you should be able to
connect to your Leo using it as a wireless router! Hope this has managed to help you guys! Thanks once
again to DN41!
bump, anyone knows how to solve this issue? =( desperately need help!
ahgao said:
bump, anyone knows how to solve this issue? =( desperately need help!
Click to expand...
Click to collapse
not sure, but seems more of a PC problem,
what system are you running - I vaguely recall, that in Vista you could define the Home/Public connection type or sth like that
I'm not sure but I guess PC problem might also be the issue... I'm using Vista Home Edition... Do you know how to define the Home/public connection type and what kind of connection type should be set? Thanks a million!
I use Vista only sporadically, but the last time I tried to use my HD2 as a router for Vista laptop, I only succeeded after several attempts, what helped for the final and successful one was deleting the "Wi Fi router" from network list on PC, soft reset of HD2 (just in case) and start from the scratch
hmm.. so you deleted all the wireless routers?
no, only the HD2 one, which accidentally is named "Wi Fi router"
ok, will try and update here.. =)
=( Still no joy... Sigh...
The Wireless Router I used last week asked which provider to use at the bottom of the main screen. Vista will tel you that you have limited connectivity if you are associated to the WAP but don't have internet access. This implies that you have the wrong provider selected at the bottom of the main screen.
so you are using dhcp?
its worth to try static ip's, or not?
for example: LEO has IP 192.168.1.1 and your pc 192.168.1.2. make sure, that the gateway entered on your pc is LEO's IP..in this case 192.168.1.1
also make sure, that you have disabled IPv6 on your notebook.
that should really work...i dont like dhcp configurations and so i always use static ones...that ever worked!
DN41
okok.. this is getting a little confusing... Can you elaborate a little on what steps to take?
i think you should first check the advice one post before
The Wireless Router I used last week asked which provider to use at the bottom of the main screen. Vista will tel you that you have limited connectivity if you are associated to the WAP but don't have internet access. This implies that you have the wrong provider selected at the bottom of the main screen.
Click to expand...
Click to collapse
DN41
Ok, which means to say, when you set up your wireless router on your Leo, you are given a choice to choose which provider am I right to say? Let me check and update you guys again.. =)
I've tried changing the settings on my wireless router on my leo to the one's which my provider uses for internet, but still, no internet access on my pc.. =( Going mad trying to configure this... anyone else knows how to fix it?? =(
now you could try static ip's.
i'm not sure, if wm asks you which ip to take while configuring the wifi router.
if yes, then you can give your leo the ip 192.168.1.1 - that should be everything for your leo.
on your pc, go to the settings of your wireless lan adapter. disable ipv6. then go to ipv4 configuration. set ip to 192.168.1.2, subnetmask (is this right translated?) is automatically 255.255.255.0 - finally set as gateway 192.168.1.1
that should work...
DN41
Ok, slow down a little here.. =) So on my Leo, the only place which I can see my IP is under the Settings ---> Wireless Controls ---> Wi-Fi ---> Advanced ---> Adaptor and networks ---> Network Adapters
and I see the Broadcom 802.11 Network Adapter and also the Broadcom 802.11 DHD Network Adapter... So I'm to change both these IP addresses to "Use specific IP address" and punch in 192.168.1.1 ??
Next would be for my notebook, where I follow as above to configure the Ip address is that right? I'll update again after I try.. =)
ALRIGHT!! You're da man!! =) Managed to connect and I'm now typing this using the connection from my Leo as the router! Great! Thanks a million DN41! =)
it's a pleasure =) have fun
DN41
Hi guys,
Since I flashed Energy Nov13 on my HD2 I've had the same problem. Previously, I would just switch on the wifi router and connect automatically from my laptop, as if with DHCP, but now DHCP isn't working.
I followed the instructions above and I CAN connect to my phone now, except I can't access the internet through it. I changed the two adapter IPs to 192.168.1.1, my laptop is 192.168.1.2 using gateway 192.168.1.1 and the connection is eastablished. However when I try to load a web page I get an "Error 105 (net::ERR_NAME_NOT_RESOLVED): The server could not be found." in Chrome.
This sounds like a DNS misconfiguration on my HD2, but nothing about DNSes was mentioned above. I can access the internet (with Opera) from my phone while the wifi router is active, but it doesn't seem to be routing that connection,
Any thoughts? This is kind of important, though I don't think I'm going to get it working today...
Hello,
I am searching for apps who can wake on LAN my wireless PC by using my HTC Legend device (through internet connection). Is this possible? What apps are currently the best in the market? Thanks a lot for your advise.
Rgds, Marvon
I'm normally using this one:
https://market.android.com/details?id=net.mafro.android.wakeonlan
and sometimes this one:
https://market.android.com/details?id=com.benfinnigan.wol
But you have to check, that you can open UDP Port 9 on your Router on the Broadcast IP (x.x.x.255) and add a DynDNS Domain if you dont have a static IP.
If you have a FritzBox you cannot open that port that easily but there is a nice App for that:
https://market.android.com/details?id=de.sifl.fritzdroid
Hi Fabi280,
thanks a lot for your reply. I am completely new to this. WOL is enabled in the bios but i cannot find the wol settings in my wireless WMP600N network card). Do you have a manual available how to set this up and let it work?
tchuss,
Marvon
The Solution is pretty simple.
There is no WOL with WLAN, actually there is but there aren't much devices that support that Technology. So lets say it just works with a LAN Cable plugged in.
A Device that has Wake On Lan enabled doesnt shut off the Network card, so its always connected, even if it is off (and its connected to power).
LAN doesnt consume that much power, as there is always power on the LAN Cable.
WLAN consumes much more power than LAN and is often used on Mobile Devices which are using Batteries
Hy, can anyone help me with this:
I have made my pc to wake and everything is working great, but after some time it stops working and I cannot wake my pc anymore... Anyone knows what is the problem? I tried to set up lease and everything and I do not know what is the problem...
In my android app I have:
ip address: 86.xx.xx.xx
mac addres: CB:xx:xx:xx:xx:xx (from my pc)
and port: 9
in router I have pre-assigned DHCP IP Address (192.xxx.x.xx) to MAC address.
If I turn off my pc, I can turn on my pc with the app, but after some time it stops working...
any help please...
hi,
I've linksys wi-fi router model WRT54GH in my home & it has a good amount of signal strength to cover entire area.
My recently bought galaxy S2 is able to identify linksys wi-fi access point & connects too with the IP assigned to it, also at wi-fi settings connected being displayed.
Now when I try to access Internet (any url google/FB), it doesn't connect at all.
I tried almost everything about router configuration, restart etc. but with no success
can someone plz help on this ?
shantanu_d said:
hi,
I've linksys wi-fi router model WRT54GH in my home & it has a good amount of signal strength to cover entire area.
My recently bought galaxy S2 is able to identify linksys wi-fi access point & connects too with the IP assigned to it, also at wi-fi settings connected being displayed.
Now when I try to access Internet (any url google/FB), it doesn't connect at all.
I tried almost everything about router configuration, restart etc. but with no success
can someone plz help on this ?
Click to expand...
Click to collapse
In my case the problem was with frozen "WiFi sharing" in combination with juicy defenders "Location" fearure. It seems such combination is dangerous. Solutin (in my case):
1. defroze
2. remove all wifi networks
3. reboot (for "clean" frozing)
4. make WiFi sharing frozen
5. reboot again just for fun
Try to check your router's MAC address restrictions. In my router, as security, I have to add MAC addresses of each device to share internet. They take IP's, connects etc. but does not have accesses to internet
as above, check that there is no MAC filtering set up.
one other thing it may be is the security settings, if you have a WEP Key to access the router it may need the Hex conversion of your key depending on what level of security you have (64bit or 128bit for example)
shantanu_d said:
hi,
I've linksys wi-fi router model WRT54GH in my home & it has a good amount of signal strength to cover entire area.
My recently bought galaxy S2 is able to identify linksys wi-fi access point & connects too with the IP assigned to it, also at wi-fi settings connected being displayed.
Now when I try to access Internet (any url google/FB), it doesn't connect at all.
I tried almost everything about router configuration, restart etc. but with no success
can someone plz help on this ?
Click to expand...
Click to collapse
Try setting up a static IP address for your phone, I presume your network is a 192.168.1.0, go into router settings and LAN setup, give your phone the address in a static DHCP assignment of 192.168.1.5, or any other address in the same subnet your in. Some SGSII's have problems with dynamic DHCP for some reason, some NS had the same problem too,
Sent from my Sammy Galactic S2 Beastly Device
I have a similar problem and I fix mine temporarily by turning my wifi off, then in wifi settings > advanced, I change wifi sleep policy from 'never' to 'only when the screen is off'. However I have to do this every time I want to use wifi so it can become quite annoying sometimes.
So I can get through however only for a short period of time as it seems as long my Galaxy S2 keeps turning off my wifi even though it's on :/
I had exactly the same issue on Linksys E4200 with my laptop, could connect to network, even to router's attached storage, but not to internet. Restart helped
On SGS2, I couldn't connect to the router at all at first, but fixed this by switching from WPA2/WPA mixed mode access protocol to WPA2 private. But I guess this is not exactly your issue.
SiSL said:
Try to check your router's MAC address restrictions. In my router, as security, I have to add MAC addresses of each device to share internet. They take IP's, connects etc. but does not have accesses to internet
Click to expand...
Click to collapse
Thanks for the suggestion but MAC restriction is already disabled at router
Robsso said:
I had exactly the same issue on Linksys E4200 with my laptop, could connect to network, even to router's attached storage, but not to internet. Restart helped
On SGS2, I couldn't connect to the router at all at first, but fixed this by switching from WPA2/WPA mixed mode access protocol to WPA2 private. But I guess this is not exactly your issue.
Click to expand...
Click to collapse
Yes, you are right this is not an issue for me.
In fact my SG2 being assigned with an IP address from 192.168.1.xx subnet.
Also at a same time my laptop connected with an IP from same subnet able to ping SG2.
OccasionalDroid said:
Try setting up a static IP address for your phone, I presume your network is a 192.168.1.0, go into router settings and LAN setup, give your phone the address in a static DHCP assignment of 192.168.1.5, or any other address in the same subnet your in. Some SGSII's have problems with dynamic DHCP for some reason, some NS had the same problem too,
Sent from my Sammy Galactic S2 Beastly Device
Click to expand...
Click to collapse
My SG2 being assigned with an IP address from 192.168.1.xx subnet.
So I think IP addressing may not be an issue.
Also another thing I tried was, at a same time my laptop connected with an IP from same subnet able to ping SG2.
So wi-fi router may not be an issue here, whats say ???
Even I am facing the same issue at my office network. I am able to connect to the wireless network but if I try to access any app I cannot browse. This is really frustrating looks like some issue with the modem drivers.
I was able to browse on another wifi created virtually by mobile tethering. This looks like a major bug with the current firmware. Another interesting thing to note is that the Wifi network has a hidden SSID and uses WPA2 auth scheme.
I have seen a Galaxy S able to connect to the same n/w without any issues.
Has anyone figured out a solution to this one ?
Hi, thanks for your reply.
I am yet to figure out a solution for this
Even I am also agree on the probable issue with modem driver.
I've D-link modem.
Are you aware of anything about this modem that can be reconfigured to get this worked ... ?? pl let me know
The wifi router at my office is Cisco Aironet 1200 Series, anyone else facing this issue ?
I'm having the same problem at work connecting my SGS2 with v2.3.3 Official Firmware (customized for Orange service provider) to a Cisco Aironet 1130 AP. I can see that the Galaxy authenticates with the AP correctly and gets IP from the DHCP server, but it cannot send or receive any traffic, although the phone stays connected and authenticated. At home, I use an Atheros based Fonera with DD-WRT without any problem.
As I'm the company's network administrator, I will try to further investigate this problem, but it seems like some kind of incompatibility between the devices or misconfiguration ....
Basuk said:
The wifi router at my office is Cisco Aironet 1200 Series, anyone else facing this issue ?
Click to expand...
Click to collapse
try turn off the wifi, turn off the mobile data and turn on the wifi again
It seems the SGS2 sometimes has problems with DNS.
Try a static IP and use 8.8.8.8 as second DNS server, which is a free Google DNS server.
This fixed MY problems
I rooted my SGS2 and voila wifi worked at my office finally I have been able to find a solution.. love my SGS2 the Beast...
I'm having this same problem..
I think I've tried all the solutions above, but one (Sorry - noob question):
Rooted?
is there a firmware patch or something that I should know about?
Anyone got any other ideas?
ETA:
I can connect to hotspots (DHCP) and at home (Have to set it to static tho)
No internet
AP works - Laptop and i8910 (had to set static and advanced settigs etc). I've rebooted it a few times, set DHCP on and off. DHCP seems to be running on the router
viqles said:
I'm having this same problem..
I think I've tried all the solutions above, but one (Sorry - noob question):
Rooted?
is there a firmware patch or something that I should know about?
Anyone got any other ideas?
Click to expand...
Click to collapse
This is an issue with SGS2 with wifi server using authentication protocol TPIK, if you use AES as encryption then it will work without any issues.
That should be a setting in my AP? I can't see it...
If I get a new non-crappy AP is that likely to solve my problem?
ETA:
Ah - that's a WPA thing? Mine only seems to do WEP - is that right?
Posted here, since I believe this is a general and not device specific issue.
So, I have set up a VPN server on OSX Lion Server edition.
It is using l2tp with preshared key and username/password for login.
i(beep) works fine and connects. Laptop works fine and can connect.
But...
1. When Iam on local network (same IP segment) I can connect using Android native l2tp VPN connection setup with PSK and user/pass.
2. When I try to connect from external (3G or other WiFi net) I am unable to connect.
3. When I enabe native tether on Android device, and connect i(beep) to the Android AP, I still am able to connect from i(beep).
These three steps tells me it is not a carrier issue, and possibly an Android issue.
Did anyone experience this (and even better.....did you find a solution)?
Kinda like the l2tp connection for security, and also Lion natively does not supply pptp connection.
/Niel
I am trying to do the same thing, I havent got the VPN to function yet though but I think its a router issue among other things. I bought a domain name and I am using that with dyndns to help simplify the ip change issues... I am getting a new router to test here next week so hopefully I'll have a better idea.
However now I am worried I'll run into the same issue as you!! lol... Its been a while since you posted, have you found a solution yet?
No. Didn't find a solution, but you might be correct in assuming its a router issue. Have a Netgear myself, and those have had quite a few issues.
Sent from my GT-I9100 using xda premium
I ended up getting a new Airport and it has pretty cool setup integration with the Server / Airport Utility, however I still cannot connect with the VPN connection.
My initial reason to set this up was to use PLEX... AND this actually works very well if I setup my connection through the PLEX connection settings.. but I still can't get it to work with the Android VPN setup.... (tested 3G and WiFi)
..also I cannot get the VPN to work with a Windows PC... tested a Mac (hackintosh) and it worked instantly...
so I think its a Mac thing maybe... Since PLEX is working... I am happy but would still like to get the VPN connection working properly. I suspect I'll need to call Apple about it though
I am also have a similar issue.
OSX Server running 10.6.8
L2TP VPN and PPTP services running
My iPhone and laptop can connect just fine. My HTC One X and HP Touchpad (CM9) can not. Both say the address can not be resolved. The server is sitting in the DMZ and if I enable the web server both devices can resolve to the default welcome page just fine.
1. It isn't a DNS issues since they can connect via the web
2. It isn't a port issue since other clients can connect
Is there some dumb setting i am missing in the VPN setup?
Thanks
Will
OSX Lion Server L2TP VPN and ICS not working
Hey guys.. I got PPTP to work to OSX Lion Server by making sure PPTP, L2TP, and IPSec forwarding were enabled through my router.
Also, make sure to check the VPN logs in /var/log/ppp/vpnd.log to see why it's not connecting..
Hello everybody.
Since last saturday i'm testing a Galaxy S3.
I want to test if everything works properly before buying it.
I have some problems deling with the WIFI stuff.
I gave him a static IP (192.168.1.15), configured the gateway as the ip of my router (192.168.1.1),
the network class is 255.255.255.0 (network prefix = 24), the DNS points to the IP of the Router (192.168.1.1)
It connects without problems. form the S3 i can ping any device in my network and from other devices i can ping the S3.
I can connect to the configuration site of the router and from the page of connected devices i can see that the S3 is connected
with the correct ip and also the MAC adress is correct.
And for now everything is fine.
Problems raise up when i try to surf internet. The answer is always "Page not found"
If i open the browser and try to navigate to google] the answer is "Page not found". Same for any other site i try to connect with.
I cannot ping external adresses from the S3. Only the ones inside my LAN.
On the same LAN there are 3 laptops, 1 IPhone, 1 TV, NAS NETGEAR , home automation screen, all connected in WIFI.
All of them configured in the same way. (static ip, gateway=ip router, dns = ip router, network class 255.255.255.0),
And they all access internet without any problem.
The network is protected with WPA2/PSKey, encryption AES.
I tried to configure channel with WPA, WEP, without protection, but no changes.
The S3 connects to router but does not connect to internet,
I also tried to make it point to a public DNS 8.8.8.8. No WAY!
Works for other devices.
I tried to reset S3 to factory parameters, same thing i did for the router.
I reconfigured everything from scratch but no result.
I do not have any filtering based on IP or MAC adress on my Router.
I tried with DHCP, with reservation of IP adresses or without reservation. No change.
Other devices can access internet. S3 does not.
I have to say i'm quite desperate.
If you guys have some good ideas to solve or diagnostic the problem i would be grateful.
Cheers,
Fabio
I get that around my office as I walk around, I find that when I change AP in range my internet connection drops. I have to constantly disable/re-enable WiFi.
Even around my house, I have the handset to WiFi always on, yet when I wake up in the morning the internet connection is not working yet there is an IP. I couldn't be bothered to telnet to port 80 etc., but I hear that the Jellybean update will resolve this issue.
Same problem
nickzap said:
Hello everybody.
Since last saturday i'm testing a Galaxy S3.
I want to test if everything works properly before buying it.
I have some problems deling with the WIFI stuff.
I gave him a static IP (192.168.1.15), configured the gateway as the ip of my router (192.168.1.1),
the network class is 255.255.255.0 (network prefix = 24), the DNS points to the IP of the Router (192.168.1.1)
It connects without problems. form the S3 i can ping any device in my network and from other devices i can ping the S3.
I can connect to the configuration site of the router and from the page of connected devices i can see that the S3 is connected
with the correct ip and also the MAC adress is correct.
And for now everything is fine.
Problems raise up when i try to surf internet. The answer is always "Page not found"
If i open the browser and try to navigate to google] the answer is "Page not found". Same for any other site i try to connect with.
I cannot ping external adresses from the S3. Only the ones inside my LAN.
On the same LAN there are 3 laptops, 1 IPhone, 1 TV, NAS NETGEAR , home automation screen, all connected in WIFI.
All of them configured in the same way. (static ip, gateway=ip router, dns = ip router, network class 255.255.255.0),
And they all access internet without any problem.
The network is protected with WPA2/PSKey, encryption AES.
I tried to configure channel with WPA, WEP, without protection, but no changes.
The S3 connects to router but does not connect to internet,
I also tried to make it point to a public DNS 8.8.8.8. No WAY!
Works for other devices.
I tried to reset S3 to factory parameters, same thing i did for the router.
I reconfigured everything from scratch but no result.
I do not have any filtering based on IP or MAC adress on my Router.
I tried with DHCP, with reservation of IP adresses or without reservation. No change.
Other devices can access internet. S3 does not.
I have to say i'm quite desperate.
If you guys have some good ideas to solve or diagnostic the problem i would be grateful.
Cheers,
Fabio
Click to expand...
Click to collapse
I'm having the exact same problem, I'd really like to know if you were able to solve the problem.
Phoenix_Dean said:
I'm having the exact same problem, I'd really like to know if you were able to solve the problem.
Click to expand...
Click to collapse
Me too... Is anybody has solution for this issue?
Oh poor fellows ....try to add DNS manually according to your ISP...not add public DNS
Try forgetting the network and connecting again and make sure all the other devices are using different ip address
Sent from my GT-I9300 using xda app-developers app