I want to reboot menu to power menu Micromax A60.
I took this reference:http://forum.xda-developers.com/showthread.php?t=811532
I finished first step according to that REF.
Then step 2 is editing the ShutdownThread.smali
i decomplied ShutdownThread.smali
But Micromax is different from Samsung Vibrant.
Help me to add.
Related
Hi.
Please can developers provide a clean custom ROM for Alcatel OT-890D dual SIM phone..
I need it badly because i feel the phone became slow some how and the internal memory just about 20 MB free .. even when i moved all apps to the SD card the max. memory i got was 40 MB ... i tried everything to solve it and nothing happened...
I rooted it before and installed superuser on it...
I need to try a custom clean rom on it.. like i used to do with my HTC Touch 3G and its custom clean ROMs , they do a big difference for the device performance....
Thanks..
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Alcatel 890d ROM flashing using a PC...
Hi,
I had rooted my Alcatel 890D using Ginger Break and it was successful. But I had uninstalled the SuperUser App installed during the rooting process later. Now my phone is not able to start properly (restarting continuously after displaying the alcatel onetouch logo). I have the original ROM with me in .tar.xz format. Can any one help me to flash this ROM using a PC..
thanks a lot....
10 steps to flash ROM on your Alcatel Onetouch 890D
1. rename the .zip file of the ROM you have to "update.zip"
2. put the update.zip file to a microSD card.
3. put the microSD to the phone
4. press and hold the "Up Volume" button on the side of the phone
5. press the PowerON button to powerON Phone
6. release the UP Volume buttom
7. You will see the Warning Android logo
8. press the center button (between the green and red buttons for answering and hangup call)
9. On the menu select (using Up and Down Volume buttons) "apply sdcard: update.zip". To select the option press the touchscreen "Home" button (left of the "search" touch screen button)
10. Select "reboot system now"
ROM flashed!!!
Now can you upload the update.zip file, so we can have it as well?
regards,
Kinglyr
Alcatel OT-890D ROM
kinglyr said:
1. rename the .zip file of the ROM you have to "update.zip"
2. put the update.zip file to a microSD card.
3. put the microSD to the phone
4. press and hold the "Up Volume" button on the side of the phone
5. press the PowerON button to powerON Phone
6. release the UP Volume buttom
7. You will see the Warning Android logo
8. press the center button (between the green and red buttons for answering and hangup call)
9. On the menu select (using Up and Down Volume buttons) "apply sdcard: update.zip". To select the option press the touchscreen "Home" button (left of the "search" touch screen button)
10. Select "reboot system now"
ROM flashed!!!
Now can you upload the update.zip file, so we can have it as well?
regards,
Kinglyr
Click to expand...
Click to collapse
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Hi sir,
Thank you for your kind reply... But my problem's different i dont have valid zip file. I'm only having the original ROM in .tar.gz. can you please help me in this situation or is it possible to get a clean custom ROM for Alcatel OT-890D ? If itz possible, it will be so useful for me and the other users having the same problem.....
Thanking you in advance,
:crying::crying:
Shal I upload that Linux archive (.tar.gz) file ?? I had converted it into zip using 7Zip, but it didn't work...
I too have the same phone and am looking for a way to flash custom recovery. I tried via ROM manager but my phone shows up as htc vision and it says that I have to download the recovery from somewhere else!
I downloaded kernel manager only to find that there are no kernels for my phone! Somebody please help!!
thank you.
sent from my Alcatel OT-890D
Do you have the rom?
abhi.vilangad said:
Hi,
I had rooted my Alcatel 890D using Ginger Break and it was successful. But I had uninstalled the SuperUser App installed during the rooting process later. Now my phone is not able to start properly (restarting continuously after displaying the alcatel onetouch logo). I have the original ROM with me in .tar.xz format. Can any one help me to flash this ROM using a PC..
thanks a lot....
Click to expand...
Click to collapse
Please upload the ROM i need it!!!
I have a solution,but I don't have rom file.can you upload that?.I have the same problem...If I succeed I will tell you.
kinglyr said:
1. rename the .zip file of the ROM you have to "update.zip"
2. put the update.zip file to a microSD card.
3. put the microSD to the phone
4. press and hold the "Up Volume" button on the side of the phone
5. press the PowerON button to powerON Phone
6. release the UP Volume buttom
7. You will see the Warning Android logo
8. press the center button (between the green and red buttons for answering and hangup call)
9. On the menu select (using Up and Down Volume buttons) "apply sdcard: update.zip". To select the option press the touchscreen "Home" button (left of the "search" touch screen button)
10. Select "reboot system now"
ROM flashed!!!
Now can you upload the update.zip file, so we can have it as well?
regards,
Kinglyr
Click to expand...
Click to collapse
Hi, I just bought this Alcatel 890d phone a couple of weeks ago. Is it possible to upgrade its software to Gingerbread or higher Android version? Could you please help us.. Thanks
hey hii guyzzz..... i bought my samsung galaxy ace plus 6 days ago... i rooted it and also installed cwm(clockwork mod) from "http://forum.xda-developers.com/showthread.php?t=1618324"..
today i opened system update then it showed that an update of around 8 mb(maybe more i don't remember)so i updated it and i chose to update now for downloaded update.. my phone restarted and started in cwm-based recovery v5.0.2.8.. and since then whatever i do it starts in it again... i tried to remove battery and start it dint worked then removed my micro sd card nothing worked also tried to root again in download mode nothing worked...i am new to android and was too exited so did all rooting and other stuff.. now i am afraid what to do... i think i have bricked my phone plz help as soon as possible....
SOS
Quick question first - Where are you and what network are you on? Because the one below is for INS India so you may need a different firmware
OK try this.
Download this firmware - Samsung Galaxy Ace Plus GT-S7500 (get both parts)
And the flasher - Odin3 v1.83 GT-S7500
Extract everything to the same folder then do this -
1. Open Odin
2. Make sure phone is totally powered off (Remove battery for 30 seconds then reinsert)
3. Boot the phone into Download Mode. You can do this by pressing and holding down the Volume Down and Home buttons while pressing the Power button until you are welcomed by a green robot indicating you are in Download Mode.
4. Once the phone is in Download mode, connect your phone to your PC while keeping the Odin3 application running.
5. Within a few moments, the ID:COM section in the Odin3 application will turn yellow. This indicates that the necessary drivers for your device have been successfully installed on your computer.
6. In Odin3, click the PDA button. Browse for S7500DDLB1_S7500ODDLB1_S7500DDLB1_HOME.tar.md5 and select it.
7. In the Option section in Odin3, make sure only Auto Reboot and F. Reset Time are checked.
8. Hit the “Start” button in Odin3 to begin flashing the Gingerbread firmware to your phone. It may take 5-10 minutes for the installation process to finish. Your phone should automatically reboot itself.
9. As soon as you see the Samsung splash screen, disconnect your phone from your PC.
10. Switch off your phone completely.
11. Reboot the phone into Recovery Mode. You can do this by holding down the Volume Up and Home buttons, then pressing down the Power button.
12. Once inside recovery, perform a wipe:
Select “wipe data/factory reset”, then select “Yes” on the screen that follows to confirm data wipe.
Select “wipe cache partition”, then select “Yes” on the screen that follows to confirm wiping your phone’s cache partition.
13. Head back to the main menu, then select “Reboot system now” to reboot your device.
(If you have problems with the drivers get these and install - Samsung USB Drivers)
Original instructions from here
Hope this helps unbrick your phone. You may need to re-root after this though
I figured that earlier but thanks... I didn't checked xda-forums...... :thumbup:
Sent from Samsung galaxy ace plus using tapatallk....loxy
reboot system now error
same problem here help me out tooo
plz plz plz
lokeshsaini94 said:
hey hii guyzzz..... i bought my samsung galaxy ace plus 6 days ago... i rooted it and also installed cwm(clockwork mod) from "http://forum.xda-developers.com/showthread.php?t=1618324"..
today i opened system update then it showed that an update of around 8 mb(maybe more i don't remember)so i updated it and i chose to update now for downloaded update.. my phone restarted and started in cwm-based recovery v5.0.2.8.. and since then whatever i do it starts in it again... i tried to remove battery and start it dint worked then removed my micro sd card nothing worked also tried to root again in download mode nothing worked...i am new to android and was too exited so did all rooting and other stuff.. now i am afraid what to do... i think i have bricked my phone plz help as soon as possible....
Click to expand...
Click to collapse
can any one pls help me install cwm recovery and backup/restore the rom on my karbonn smart tab 3 blade. fyi, it comes pre-rooted.
thank you.
m0han said:
can any one pls help me install cwm recovery and backup/restore the rom on my karbonn smart tab 3 blade. fyi, it comes pre-rooted.
thank you.
Click to expand...
Click to collapse
Me too need help with this..
My Karbonn Smart Tab 3 is still not working..
If someone can guide me on how to flash the ROM.
1. I have downloaded the ROM from moulnisky dot com (Cant post links yet)
2. Found the Flasing tool and driver from gsmhosting dot com (just search for "Karbonn Smart Tab 3")
3. The Flashing tool is not in English and so if you just do next, next it should work.
The only problem that I am facing is my Tab is stuck at the boot-up animation screen, I am able to hold volume up + Power to go to recovery mode, but I don't know if this tab has any download mode because I have tried volume down + Power (nothing happens)
I have tried the flashing tool while the Tab is in recovery mode and also tried it when the tab is on the animation screen but nothing happens.
I don't have any where else to look for help.
Please help.
Thanks.
bediinderjit said:
Me too need help with this..
My Karbonn Smart Tab 3 is still not working..
If someone can guide me on how to flash the ROM.
1. I have downloaded the ROM from moulnisky dot com (Cant post links yet)
2. Found the Flasing tool and driver from gsmhosting dot com (just search for "Karbonn Smart Tab 3")
3. The Flashing tool is not in English and so if you just do next, next it should work.
The only problem that I am facing is my Tab is stuck at the boot-up animation screen, I am able to hold volume up + Power to go to recovery mode, but I don't know if this tab has any download mode because I have tried volume down + Power (nothing happens)
I have tried the flashing tool while the Tab is in recovery mode and also tried it when the tab is on the animation screen but nothing happens.
I don't have any where else to look for help.
Please help.
Thanks.
Click to expand...
Click to collapse
Only @SilverDragon24 can help u
Solution
It is because livesuit needs tab to be in download mode
Unlike samsung, we go to download mode by pressing vol- +menu + power,
In tab,
1 switch tab 3 off
2 press volume down (or up....I dont exactly remember..try both)
3 keep pressing and put the usb in
4 press power repeatedly untill Tab gets detected via LiveSuit
Also I would ask u not to update to jelly bean as I just updated and Its too buggy... lags too much and also root goes off
In case u get image of Stock ICS 4.0.4, Please put the link here!
Im in a bad need of it
Hit thanks
hello fellow earthlings here is the complete tutorial of ROOTING Samsung galaxy star pro GT-S7262 "TRUST ME ITS FIRST ON NET" other tutorials will give u a white screen of death ..
1) frist install samsung drivers from samsung website or if u have win8skip this step
2)enable usb debugging in ur phones deloper options its in settings at bottom
3)turn off ur mobile then press vol down+ power+ home
it will show a caution press vol up now ur in download mode
4)run odin as administrator select the recovery.tar.md5 file in AP and BOOT file in BL tick the both
5) connect ur phone via usb while in download mode see if odin shows added click start!
it will flash and then go recovery mode by home+vol up +power
or download adb to get in recovery mode if u want adb inbox me !
download superuser.zip from this link http://www23.zippyshare.com/v/54713367/file.html
requied files for flash link https://www.mediafire.com/?cojuwbjcxj6vtaw
put it in sdcard then go into recovery mode and select install from zip choose from sdcard and install and volls ! ur phone is rooted !!!
still confused INBOX ME dont follow any other instruction on net u will get white screen of death error THIS IS EXCLUSIVE !!! DEVELOPED BY ME have a nice day
TELL ME THE REVIEWS ABOUT HOW IT WORKED OUT FOR U
my gt7262 display is white i am try root from your method
Sir pleas give a idea for how to I am back in my
Colour full display
Because my gt7262 is white I am tryin g your root proces
Pleas sir give a idea how toi back I'm my gt7262
hello!
I have a reply of the note 3 specifications are in the picture, good in a procedure happened in the BRICK device now he only comes on the screen , pressing power and volume - nothing happens , power and volume + appear three options that do not work , using SP_Flash_Tool_v5.1348.00 program and only selecting the file RECOVERY time I log in CWM but I can not put any rom ,
someone with more experience could help me ?
Please! someone help me?