My g tab has no sound after flashed cm7.03. Also, netflix freeze on the load screen. Has anyone had the same problem?
mlanberg said:
My g tab has no sound after flashed cm7.03. Also, netflix freeze on the load screen. Has anyone had the same problem?
Click to expand...
Click to collapse
while playing some video/audio, just insert a headphone sound will come in headphones and then remove the headphones the sound will be fine from speakers.
Same Issue - DSPManager Stop
I have the same issue with CM7.03. The work around seems to work, but then after a while I get the DSPManager stopped responding error and lose the audio again. Is there a nightly that will fix this or setting I can tweak?
mbents said:
I have the same issue with CM7.03. The work around seems to work, but then after a while I get the DSPManager stopped responding error and lose the audio again. Is there a nightly that will fix this or setting I can tweak?
Click to expand...
Click to collapse
Best not to use the DSPManager for now--its known to have problems.
Related
jonno92 said:
Hi everyone,
I've been running CheckROM v6 since its release and loving it. However, I'm having some issues currently with sound.
Everything was working until I changed my kernel and modem in the Kitchen. I changed to NEAK kernel and XXKI4 modem, and my sound started to play up. It didn't seem as loud as normal, and sometimes my alarm would go off but no sound would play (Alarm Clock Xtreme Paid version and free version). Also, when I open Zedge ringtones, when I am 'previewing' the ringtones no sound plays at all. I tried changing my modem and kernel (changed to Redpill + XXKI1) and there's no change.
My phone still rings and my message and Facebook notification tones work, as does my bootanimation sounds. Seems like the System sounds aren't working or something?
Any ideas?
Cheers!
UPDATE: I've downloaded Volume Control app and turned up the system and alarm volumes - and it's still not working!
Click to expand...
Click to collapse
ozzyita said:
Make a call with speaker phone on that should sort it out
Click to expand...
Click to collapse
This definitely fixed my problem instantly! However, I keep getting the issue sometimes, which is annoying because sound in some apps don't work, and my alarm doesn't go off some mornings!
I've tried different kernels and different modems and I keep running into the problem sometimes. Also, my phone lags ALOT when I'm switching between phone/speakerphone/bluetooth headset. I miss out on about 10 seconds of the conversation when I get out of my car and change from bluetooth to speaker. I'm guessing this is a related problem so was wondering if you had suggestions on how to fix it permanently?
I use my phone for business purposes so I don't want to lost 10 seconds of conversation when switching from bluetooth to speakerphone
Any help would be much appreciated!
Cheers
I think it would be better if you do Factory reset but before doing that just don't forget to BACKUP your Contacts and other valuable apps...
Hope This helps..
Hmmm I'd prefer not to if there's an easy fix for the bluetooth issue. I can switch between phone and speakerphone easily, but when I turn bluetooth on then it always stuffs up.
I think it's ever since I flashed the 'Fully Modded Phone' mod, which I've now flashed over with a different Phone mod but the issue is there still...
Anyone else have any ideas? I've reinstalled the Phone apk from the original CheckROM v6 install and I'm still getting the same issues.
Noone else is having this problem?
I'm having a similar issue...
Upgraded from checkrom v4 to v6 previously and had various issues so went back.
This time though I did a full wipe first and now v6 works fine.... except when using it in the car with my Parrot MKI9200 bluetooth car kit.
Now whenever I answer a call there's about a 2-3 second lag before the sound cuts in. Making calls works ok but there's still a lag between dialing and the phone display/audio catching up.
I'm sure if I go back to v4 again it'll be fine as that was one of the issues I had before.
I've deleted / readded the pairing etc but no effect.
Any ideas?
hmm anyone found a fix for this yet?
??
I use the CM10 from Droid Basement and I have the following problems with audio:
1- When using headphones, minimum volume is too loud. When I increase the volume, it goes up only a few steps, and then stays on the same level until maximum volume on the slider.
2- When recording videos with the camera, only left channel of audio is recorded. It probably should merge both left and right since it's mono.
Anyone else having those problems? I work with audio and video a lot and this is a very annoying problem present since the first version I installed of this CM10.
I use P7500.
The first problem is an all around JB bug I think. I had it on AOSP, AOKP, and CM on my s2.
Sent from my GT-P7510 using xda app-developers app
Shawn said:
The first problem is an all around JB bug I think. I had it on AOSP, AOKP, and CM on my s2.
Sent from my GT-P7510 using xda app-developers app
Click to expand...
Click to collapse
The first problem is indeed a known issue, i also have this problem if i use the hazrd keys, use the volume slider on yoiur screen.
I have never heard about the other issues? i will check it out
yes it is trueeeeeeee
Marco Mugnatto said:
I use the CM10 from Droid Basement and I have the following problems with audio:
1- When using headphones, minimum volume is too loud. When I increase the volume, it goes up only a few steps, and then stays on the same level until maximum volume on the slider.
2- When recording videos with the camera, only left channel of audio is recorded. It probably should merge both left and right since it's mono.
Anyone else having those problems? I work with audio and video a lot and this is a very annoying problem present since the first version I installed of this CM10.
I use P7500.
Click to expand...
Click to collapse
same issue here.... except my headphone volume is too low... the volume from speakers is actually great but when on headphones... harware keys dont work all the time and i have to use the on screen sliders. when i do thevolumes steps up once from really low to mediumand thats all i get...
as for recording, i havent experienced it.
******POTENTIAL WORKAROUND*******
you might want to try the A1 kernel as it includes VooDoo sound. that might work..
1. make sure you get the cm version. it works well for most but i cant get it work.... it freezes me up as soon as my homescreen loads. if you wanna try it.......
2.make sure you have pershoots 11/19 kernel on your sd card so you can flash back if you run into the same problem...
A1 Kernel READ CAREFULLY---- http://forum.xda-developers.com/showthread.php?t=1833136
Pershoots 3.1.10 (11/19) Kernel ---- http://droidbasement.com/db-blog/?p=2906
good luck...report back =)
I am having the same issue. I tried installing beats audio, but it didn't change the volume problem, it did make the sound a little better though. I am hoping this issue is fixed in a later version of cm10.
Also, I am having an issue (i posted it in the forum with no response) of my lockscreen being stuck in landscape mode, even when auto rotate is on. Does anyone else have this same issue?
Prashramani12 said:
Also, I am having an issue (i posted it in the forum with no response) of my lockscreen being stuck in landscape mode, even when auto rotate is on. Does anyone else have this same issue?
Click to expand...
Click to collapse
chk my last post for fix....
and lock screen in pershoots build has portrait disabled. will only display in landscape mode...i dont know if othere cm 10 ports...PA, TEAM D.I.R.T, AOKP, etc.... allow rotate of lockscreen...
audio
Marco Mugnatto said:
2- When recording videos with the camera, only left channel of audio is recorded. It probably should merge both left and right since it's mono.
.
Click to expand...
Click to collapse
anyone else having this issue?
I am seeing this on my p970. (ht..tp://get.cm/?device=p970)
only one audio channel gets recorded in my vidoes (not both left and right).
frugalman said:
anyone else having this issue?
I am seeing this on my p970. (ht..tp://get.cm/?device=p970)
only one audio channel gets recorded in my vidoes (not both left and right).
Click to expand...
Click to collapse
This has already been fixed in cm10.1 for tab 10.1 and is included in the nightlies.
My problem isn't the same as the OP, but title is the same: CM10 audio problems.
I would absolutely LOVE to use this ROM. I've tried cyanogen on many occasions and been very impressed. My only downfall with CM9 and CM10 was the audio. On CM9, my headphone volume would always reset to a low volume when a new song played. The only way I could find to fix this was via the DSP manager wm989 tab (or something similar) and changing the amplifier level, then changing it back. I never followed up to see if others were having the same problems, so I'm sure it is an issue that was already resolved. I eventually dumped the ROM for another because of the problem, BUT....I digress.
My current problem is on CM10. I love the clean look, I love the speed, the customization....EVERYTHING.....except the audio. I just noticed it a bit earlier while trying to play Youtube videos; the speaker volume was extremely low. I don't see any amplifier settings on the speaker tab of DSP manager. I have audio manager / Hide it pro installed, but all those volumes are at max. I went so far as to remove DSP manager from the system/app folder....but that did nothing useful that I can tell (aside from giving trebuchet a forced close). I installed Beats Audio, but that didn't help. I'm at a loss, and freely admit that I'm struggling to figure out how to resolve this. Would someone please assist? I'll gladly post logs if necessary.....just tell me how to post them. I really want this ROM to work, because it is almost perfect aside from this problem.
Hey everyone. I'm in desperate need of help. I'm wondering whether my earphone jack in my phone is just broken or this is some sort of software issue. I either can't find anything about this problem anywhere else or I'm just searching the wrong keywords.
My international SGS3 with the latest nightly version of CM11 recently started having this weird problem where I would start music playing in Apollo, PlayerPro or Rocket Player (does it in all of them) and there was no sound coming through the earphones at all. I then discovered that when I pressed my home button and minimised the app, the music started playing. However, if I touch anything (status bar, open another app) the music stops immediately until I put it back to the home screen. Music works fine when playing music through the loudspeaker, and I've tried many different pairs of earphones.
I've seen strange stuff where the music can't play in the background but never that it can't play in anything but the background. Will I buy a replacement earphone jack or is there something I can do to fix it without taking my phone to bits?
MattyB151 said:
Hey everyone. I'm in desperate need of help. I'm wondering whether my earphone jack in my phone is just broken or this is some sort of software issue. I either can't find anything about this problem anywhere else or I'm just searching the wrong keywords.
My international SGS3 with the latest nightly version of CM11 recently started having this weird problem where I would start music playing in Apollo, PlayerPro or Rocket Player (does it in all of them) and there was no sound coming through the earphones at all. I then discovered that when I pressed my home button and minimised the app, the music started playing. However, if I touch anything (status bar, open another app) the music stops immediately until I put it back to the home screen. Music works fine when playing music through the loudspeaker, and I've tried many different pairs of earphones.
I've seen strange stuff where the music can't play in the background but never that it can't play in anything but the background. Will I buy a replacement earphone jack or is there something I can do to fix it without taking my phone to bits?
Click to expand...
Click to collapse
It seems to be something to do with the newest CM11 build...
Make a nandroid backup, flash another AOSP/Sammy's rom (i recommend this one: http://forum.xda-developers.com/showthread.php?t=2603155 )
and see if the problem continues
amirTor said:
It seems to be something to do with the newest CM11 build...
Make a nandroid backup, flash another AOSP/Sammy's rom (i recommend this one: http://forum.xda-developers.com/showthread.php?t=2603155 )
and see if the problem continues
Click to expand...
Click to collapse
It wasn't working before I updated it and it still isn't working. Why is no one else having this problem with CM11?
MattyB151 said:
It wasn't working before I updated it and it still isn't working. Why is no one else having this problem with CM11?
Click to expand...
Click to collapse
Yes i have the same problem, also i had it with stock ROM 4.1.2 but i managed to fix it with the balance between L and R. But the option is not available anymore. So i think there is the problem somehow
tacx said:
Yes i have the same problem, also i had it with stock ROM 4.1.2 but i managed to fix it with the balance between L and R. But the option is not available anymore. So i think there is the problem somehow
Click to expand...
Click to collapse
So do you think it will be fixed? I think I'm going to flash my phone back to stock . Not liking this problem.
Since I got the upgrade to 9.1, my music audio and google assistant sounds very tinny and echoey when playing over bluetooth. Anyone had similar issues?
Hi!
Try to put normal headphones first then go and change sounds fx to normal over phone settings... I have also that problem, but I need to test it again when I get to work where's my Bluetooth headset is
apelamod said:
Hi!
Try to put normal headphones first then go and change sounds fx to normal over phone settings... I have also that problem, but I need to test it again when I get to work where's my Bluetooth headset is
Click to expand...
Click to collapse
Thanks, thats fixed it.
Hi guys,
I am facing a awful problem with bluetooth handset (Plantronics Blackbeat) and stock ROM
When connected in bluetooth, music plays fine, but I cannot get the music paused through Bluetooth headset. However, changing tracks works fine. Clearing bluetooth data and reboot the phone makes things to works, but only one time !!
How can I get this issue fixed ? Does someone else 's facing this issue ?
I am using Poweramp and YouTube Vanced if it may help.
No problems with IconX (2018), the pause button works fine, maybe it's a problem from the bluetooth headset, have you tried with other phones/devices?
No problem here with Redmi airpods.
N1ck474 said:
No problems with IconX (2018), the pause button works fine, maybe it's a problem from the bluetooth headset, have you tried with other phones/devices?
Click to expand...
Click to collapse
Yes I tried with my old phone and it perfectly works. Only on this Mi A3 it won't work properly, so awful
the problem im facing is with my Lypertek Tevi
frankee207 said:
Hi guys,
I am facing a awful problem with bluetooth handset (Plantronics Blackbeat) and stock ROM
When connected in bluetooth, music plays fine, but I cannot get the music paused through Bluetooth headset. However, changing tracks works fine. Clearing bluetooth data and reboot the phone makes things to works, but only one time !!
How can I get this issue fixed ? Does someone else 's facing this issue ?
I am using Poweramp and YouTube Vanced if it may help.
Click to expand...
Click to collapse
When im listening tu music and recieve a call or make one, it fails and need to reset bluetooth configuration, help please
jsrueda said:
When im listening tu music and recieve a call or make one, it fails and need to reset bluetooth configuration, help please
Click to expand...
Click to collapse
This has already been discussed, no solution for now. Let's hope Android 10 solves the problem.