Hi,
I had an australian optus branded phone. I have installed
intratechs Ke2 rooted kernel,
ke7 stock rom,
intratechs Ke7 rooted kernel,
ke7 stock kernel
Everything is fine. However Kies still recognised it with the CFM optus phone and displays the this device cannot be updated message.
Without doing a factory reset and losing all my data (i assume this would be the case) is it possible to get Kies to recognise the device as a KE7 stock euro rom?
I assume this would let me apply any updates via kies, as they become available. I would have to reroot but this is not a problem.
Any help appreciated
Cheers
Paul
Kies reads the product code and other stuff from the registry .
Dont know if deleting reg entries may be the answer as per .
http://forum.xda-developers.com/showthread.php?t=1089874
jje
JJEgan said:
Kies reads the product code and other stuff from the registry .
Dont know if deleting reg entries may be the answer as per .
jje
Click to expand...
Click to collapse
Thanks, when i delete the key it recreates it as
I9100XWKE7/I9100XEUKD1/I9100XXKE4/I9100XWKE7
Kies reports current firmware version
: PDA:KE7 / PHONE:KE4 / CSC:KD1 (OPS)
and i believe (OPS) stands for Optus
I installed the firmware from intratechs thread
PDA:XWKE7
PHONE: XXKE4
CSC:XEUKD1 (XEU)
which was XEU. So for some reason it still thinks it is optus and says device cannot be updated?
even if i delete the whole device db subtree from the registry it just recreates it.
Any other ideas?
thanks in advance for any help
I just found the information in this thread
[ROM][GUIDE] Flash the latest rom for I9100 using Odin or Kies!
This allows me to set the correct product code and now KIES tells me i have the latest firmware, so i should be able to upgrade if i want.
Cheers
Yeah I should probably do a FAQ for the thread but time is against me so I'll see if I can do it at some point.
Related
Hi Guys,
My Galaxy S2 came with KE7 I bought it in the UK and it's not branded to any network, I flashed CF-Root-SGS2_XW_XEU_KE7-v4.0-CWM4 and then the stock kernel and all was good.
A while later I tried to flash the clockworkmod from http://forum.xda-developers.com/showthread.php?t=1118693 ... that flashed OK but I couldn't get into the CWM recovery so I flashed the CF-Root back.
The recovery menu now works, but I still have the warning triangle on boot (I have tried reflashing the stock kernel again). This in itself doesn't bother me too much - I did this a month or 2 ago.
I've been told by someone that there is an upgrade available via Kies, however when connecting the phone Kies on Windows just tries to connect for ages and then gives up. (I have disabled USB debugging). Not that it should be relevant but I have previously removed Kies.apk, KiesAir.apk and kieswifi.apk using g-script but I put these back before trying to do this.
My phone currently reports:
Android: 2.3.3
Baseband: I9100XXKE4
Kernel: 2.6.35.7-I9100XWKE7-CL215725 [email protected] #2
Build: GINGERBREAD.XWKE7
Looking at these values, is the mix of XX and XW correct? (It's possible that I might have downloaded the wrong CF-root version the second time)
All I would really like to do is get the official version Samsung version and then root the phone. I believe that the Kies upgrade would still keep all applications.
Any help would be much appreciated.
You can find official, stock roms in the development threads
Sent from my GT-I9100
Thanks.
I've seen the thread http://forum.xda-developers.com/showthread.php?t=1075278 but I'm not sure which is the correct stock firmware for me.
Given the other issues I've described above I'm a bit 'concerned' that I've already done something wrong :S
EDIT:Re-editting my post cos Im blind and cant read good
Sorry dude I got all screwed-up there I have ta apolagize.Anyway you can download the one i told you and all will be cool as its a UK+Europe generic as stated and its XWKF3 but you are indeed on KE7 and you will find it here
http://forum.xda-developers.com/showthread.php?t=1075278
its XWKE7 ,Build Date 18/05/2011 generic XEU
.TO root go to this link.
http://forum.xda-developers.com/showthread.php?t=1103399
its a kernel flash via odin that takes,from hitting the start button,about 10 seconds to complete.It roots and puts CWM on your phone.The kernel you want is one of the first ones (xx-xeu-ke7).You Cant go wrong its all explained.
EDIT: You can also check to see if it really is unbranded by checking your product code by typing this number and checking the last 3 letters of your code *2767*4387264636#
Thanks very much. The PCode I have is GT-I9100LKAXEU.
I'm going to try the latest KI3 and see how that goes, failing that I'll reflash the I9100XWKE7_I9100XXKE4_I9100XEUKD1 I've just got (I note that this lists KE4 and KE7 in the filename, which does match the version I currently have).
The important part about your code is the XEU which is your local CSC.this is recognized by kies when you connect.The first thing Kies does when you connect is rcognize this code to identify the phone and look for the appropriate firmware update.When you flash a new firmware if its not official obviously kies wont understand it cos it doesnt register.Your Product Code says your phone is a UK model (XEU) so for example if you flash an official firmware and by default the phone sets KOR then kies has 2 conflicting CSCs and thus might decide not to connect.If you want your phone to work properly on kies then when you flash an official FW make sure you have XEU selected as your CSC marking *#272*(IMEI)# this will then reboot your phone although its always good to do a factory rest too.Do this anyway although not on an official FW as it might not always set the CSC to your area so it pays to check.
This is what Kies looks at for an upgrade .
http://forum.xda-developers.com/showthread.php?t=1089874
Spoof FW Check Fus may be worth a search also.
jje
I have rooted my phone then flashed the firmware with XEU (Generic UK+Europe) : http://www.multiupload.com/ZZYM5ZAFA0
From my understanding i can change the csc from tmu to xeu.This i am unable to do,also when i plug phone into kies ,I get the message this version cannot be updated.
What is going on? i have read posts that the above can be done?
Can someone please advise me?
update to this, when i do *#272 to change the csc i am unable, just one choice, of tmu.However *#1234# i have csc i9100xeukd1.
What about kies not giving updates ? I wish i left it as it was .
In recovery mode i see cant access to system csc tmu system
Successfully applied multi csc , What does this mean ?
version is a frankenstein version with several different files used not stock, which means that kies will not recognize it.
to change csc do the following type in the following code *#272*your IMEI# in phone dialer and the pick the csc you want.
where can i find a proper rom that will upgrade on kies??
also i have tried to change the csc, it does not work as i already stated.
crazydiamond1970 said:
where can i find a proper rom that will upgrade on kies??
also i have tried to change the csc, it does not work as i already stated.
Click to expand...
Click to collapse
Look for intratechs original firmware thread in original development section.
Download the latest carrier specific firmware for your carrier and flash via Odin. Should have one for yours with the correct csc.
Probably will need to clear caches etc when downgrading.
Sent from my GT-I9100 using XDA App
Does this mean that i will forever be stuck with Tmu in the csc?
I dont really want to go back or downgrade its my phone on pay as you go.
Edit: you will only be able to upgrade with kies if you flash your regions stock firmware like I said before.
You have other options to update though.
Odin
Checkfus
CWM for Custom firmware.
Can download any csc and flash via Odin or use multi csc and set it like the previous post.
Sent from my GT-I9100 using XDA App
Maybe i have read to much into flashing/rooting and confused myself
I was under the impression that even if the phone was upgraded via oden that kies would still possibly give an, this is the most up to date firmware. and not what i see that is this version cannot be updated.
I took the firmware that gave or so i think csc for xeu ,but phone still gives csc as tmu with *#272 imei on dail pad.
I have cym and superuser on phone , but have no idea how to use it
I did a factory reset plugged into kies , and now have an update...
old pda kf3 phone ke7 csc kd1 (xeu)
new pda ki4 phone ki1 csc kh2 (xeu)
Hi.. I'm very new to this and just got an unlocked Crazy Johns GS2:
- GT-I9100T, version 2.3.3
- PDA DU-KH1
- Phone DU-KF4
- CSC VAU-KG2, 11 Aug '11
Is it possible to get Kies to see my phone as unbranded and for a region (eg. Poland?) where Samsung has officially released version 2.3.5, so I can update via Kies (rather than risking Odin, flashing and maybe voiding warranty) - for example by changing the CSC?
To do that, would I first back-up (Kies and Google sync), then key in *#272*<my phone's IMEI># and then select a region code (?Poland) and click Install? Any help would be greatly applreciated.
Use intratechs original stock Samsung firmware and Odin to flash not kies.
Find his thread in the development section.
If you want root access usr chainfires cfroot option. His thread is in same section.
Throw kies disk over the back fence
Edit:
Firmware
http://forum.xda-developers.com/showthread.php?t=1075278
Cfroot
http://forum.xda-developers.com/showthread.php?t=1103399
Sent from my GT-I9100 using XDA App
(I thought I'd posted a reply.. sorry if it posts twice)
Thanks for your fast reply and advice. I'd read about Odin but was worried I couldn't revert properly for warranty. Can I first take an "image" (like on a PC) to restore if needed? Would the exact setup (firmware, CJ/Voda apps, carrier settings) be available for restoring (there'd be so many variations worldwide how could they all be available)?
I'll take your advice, thank you, but for the record is what I initially asked viable - to "trick" the OTA process or Kies into seeing my phone as unbranded Polish and providing an official update (and for warranty, change the CSC back, re-update)?
OK, I've downloaded Odin v1.85 and XWKJ2 (pda XWKJ2, phone XXKI4, ver 2.3.5, 21 Oct 11, XEF/France) and the related XWKJ2 Stock Kernel.
However what would be the right "restore" firmware, in case I need a warranty repair? My phone is an unlocked Crazy Johns GS2, GT-I9100T, originally:
pda DU-KF4
phone DU-KF4
csc VAU-KF4 (ver 2.3.3, 29 Jun 11)
..and Kies "properly" updated it to:
pda DU-KH1
phone DU-KF4
csc VAU-KG2 (ver 2.3.3, 11 Aug 11)
..so either official version would be OK, but can anyone suggest where I could get one? Otherwise I guess I'll have to wait for an official update
Please ignore my previous post, it was at http://forum.xda-developers.com/showthread.php?t=1113928
Cool glad you spotted it.
You don't need the stock kernel really. Once you're rooted with a cfroot kernel you're good to go.
If you want to send in for repair, flash back to original firmware, root will be gone, then grab a USB jig to reset the flash counter.
Jig will also get rid of the yellow triangle if it annoys you
Good luck.
Sent from my GT-I9100 using XDA App
I'm now on version 2.3.5, pda xw-kj2, phone xx-ki4, csc xef-kj1 and all looks good - except when I have a weak GPS signal (eg. inside) Google Maps shows me as being in China! Walk outside (good GPS signal) and it swings back to by actual location (Adelaide, Australia).
It wasn't doing this with the original firmware. Maybe the 2.3.5 firmware from XDA (pda XWKJ2, phone XXKI4, XEF/France) that I flashed has a Chinese GPS.conf file? If that's the issue then is there an additional file for an Odin flash to revert the GPS.conf?
I think fasterfix is what you need. App from market I think.
Sent from my GT-I9100 using XDA App
Hi,
Maybe a bad mistake, but just bought a S2 on ebay. It has/had a CSC which I didnt recognise and wanted to debrand it. All ok so far, can flash via Odin a debranded firmware.
However, when trying 272 and imei to change the CSC code, none are listed. I've tried installing a multi and XEU CSC via Odin and I notice the error unable to access CSC area, but then states CSC update applied.
When I then go through KIES it changes my CSC from KD1 to KH2 (the original). I've no idea what the KH2 CSC is, from what I've seen KD1 seems to be the norm?
Thanks for any help.
bellang said:
Hi,
Maybe a bad mistake, but just bought a S2 on ebay. It has/had a CSC which I didnt recognise and wanted to debrand it. All ok so far, can flash via Odin a debranded firmware.
However, when trying 272 and imei to change the CSC code, none are listed. I've tried installing a multi and XEU CSC via Odin and I notice the error unable to access CSC area, but then states CSC update applied.
When I then go through KIES it changes my CSC from KD1 to KH2 (the original). I've no idea what the KH2 CSC is, from what I've seen KD1 seems to be the norm?
Thanks for any help.
Click to expand...
Click to collapse
CSC is country specific .
CSC is rarely updated a KI firmware may have a much older CSC .
You do not actually need a CSC for the phone to work set APN network manually .
jje
The problem is that for this CSC the latest update through KIES is 2.3.4. I'd like to go up from here, but believe I need to get my CSC to a non-brand one. Any ideas?
bellang said:
The problem is that for this CSC the latest update through KIES is 2.3.4. I'd like to go up from here, but believe I need to get my CSC to a non-brand one. Any ideas?
Click to expand...
Click to collapse
REPEAT
CSC has nothing to do with updates via KIES .
Its product codes etc that determine if their is a matching firmware and not CSC .
You have changed something and codes don't match firmware .
I dont understand where you are going Odin Kies . If you want to update you have two routes one official Samsung update supplied by the phones vendor to KIES server if the vendor has updated ..
Or flash Samsung stock rom via ODIN .
jje
The idea was to use Odin to get a non-branded firmware and then use KIES from there on in, or OTA. Used this method with the i9000 without problem. I notice the OTA works fine but seems to stop me at 2.3.4 even though its a standard non-branded product code I believe. Is this normal?
Sellout SMS - Off
PCode - GT-I9100LKAXEU
Mode: Test
how about going to intra thread and download official rom + csc u want and flash it via odin?
Slow N Stupid said:
how about going to intra thread and download official rom + csc u want and flash it via odin?
Click to expand...
Click to collapse
Was sort of hoping to use the OTA updates as don't always have access to a PC. Any idea how to turn Test Mode off on the S2? Wondered if this was causing an issue?
Hi, guys!
I've been searching for a while now but can't find the answers I need.
Recently, I upgraded my S2 via Odin from:
PDA: I9100XWKI4
PHONE: I9100XXKI1
CSC: I9100OXFKE1
(2.3.4, Croatia)
file: I9100XWKI4_I9100OXFKE1_TRA.zip
to:
PDA: I9100BUKJ3
PHONE: I9100BUKI1
CSC: I9100VIPKI2
(2.3.5, Croatia - VIPNET)
file: I9100BUKJ3_I9100VIPKI2_VIP.zip
You might ask why did I flash the branded firmware - I did it because I was tired of waiting for updates that would come who knows when and Vipnet already had them.
Now, here's my problem description:
On the 2.3.4 firmware, after typing in this code: *#272*IMEI#, I could see lots of sales codes including the "TRA" code that works with Kies in my country. Kies also sees the firmware correctly (.../.../...) - no problems here.
On the 2.3.5 firmware I can see only one code and that's the one in the text field, there are no codes to select and change. Kies says that my current firmware version is: I9100BUKJ3/I9100VIPKI2/I9100BUKI1/I9100BUKJ3 (TRA)
and that my device does not support software upgrading via Kies.
Something happened here that got the software version confused, I believe it should be: BUKJ3/BUKI1/VIPKI2 (TRA)
So, finally my questions are:
How can I correct this software version/csc thing in order to get Kies willing to update my phone again?
Is there a croatian 2.3.5 firmware that installs correctly or csc I can flash to fix this?
Thank you!
Ivan
Edit:I just wanted to tell you that I've found the way to fix Kies after flashing the update with Odin. The answer is quite simple - just format your computer and reinstall windows. If you're not able to do that, use some tools that will clean your registry and your disk of all the junk that Kies put in it.
Kies now sees my software version as it should from the beginning
from reading what you have written it seems that you have flashed a leaked firmware..
if thats the case then kies would respond the way it is till the official update rolls out..!
its nothimg to worry about because you can always change firmwares via odin!
hit the thanks button if i helped you..
Sent from my GT-I9100 using xda premium
playlet said:
Hi, guys!
and that my device does not support software upgrading via Kies.
Unless the codes match firmware uploaded to Kies then it cannot update .
Once you start altering the firmware you may no longer have matching codes .
Or their is no update for those codes .So, finally my questions are:How can I correct this software version/csc thing in order to get Kies willing to update my phone again?
Flash the original firmware or the same vendors firmware .
Remove Kies and Kies registry settings reinstall and try .
Or flash stock rom via Odin from the stock rom thread or search for the CheckFUS page may help .
jje
Click to expand...
Click to collapse
pls visit the thread..it may be helpful to get your CSC....and instructions...
http://forum.xda-developers.com/showthread.php?t=1075278
hit thanks if helped.......
Kies works with the original firmware that was installed on the phone (after flashing again). I just wanted to flash the newer firmware but on the other service provider since there is no update for my provider. The phone is not locked...
Would it be safe to flash ONLY the CSC (CSC_I9100VIPKI2.tar.md5) file from Odin (after the 2.3.5 firmware from the first post)?
Would that fix the wrong software version I've been getting from Kies?
playlet said:
Would it be safe to flash ONLY the CSC (CSC_I9100VIPKI2.tar.md5) file from Odin (after the 2.3.5 firmware from the first post)?
Modems kernels or CSC can be swapped around
Would that fix the wrong software version I've been getting from Kies?
Unlikely as CSC is just a list of the local area networks settings thats not actually needed for the phone to work .
jje
Click to expand...
Click to collapse
Okay then, I'll stick to this 2.3.5 firmware until there is official ICS for Croatia.
Thank you!
I just remembered something - I flashed the .tar.md5 file under the PDA section in Odin. Is that maybe the cause of this? Would 3 separate files for PDA, PHONE and CSC make a difference?
playlet said:
I just remembered something - I flashed the .tar.md5 file under the PDA section in Odin. Is that maybe the cause of this? Would 3 separate files for PDA, PHONE and CSC make a difference?
Click to expand...
Click to collapse
No if the tar has the modem and csc in it its all flashed as one through PDA
But their are some firmwares around that are in three parts
Flash via PDA rom Plus Modem In Phone and CSC in CSC .
They can always be flashed again /or separate .
jje
Is there some procedure for splitting the .tar or are those 3 parts something different than files in the .tar?
playlet said:
Is there some procedure for splitting the .tar or are those 3 parts something different than files in the .tar?
Click to expand...
Click to collapse
No the usual on XDA is single file with all in .
On samfirmware it can be three separate files PDA Modem and CSC .
jje
OK, thanks again
Hi, guys!
I just wanted to tell you that I've found the way to fix Kies after flashing the update with Odin. The answer is quite simple - just format your computer and reinstall windows. If you're not able to do that, use some tools that will clean your registry and your disk of all the junk that Kies put in it.
Kies now sees my software version as it should from the beginning
Could you please share with us, what registry files need to be cleaned. A step by step instuction " if available" would be heaven sent
playlet said:
Hi, guys!
I just wanted to tell you that I've found the way to fix Kies after flashing the update with Odin. The answer is quite simple - just format your computer and reinstall windows. If you're not able to do that, use some tools that will clean your registry and your disk of all the junk that Kies put in it.
Kies now sees my software version as it should from the beginning
Click to expand...
Click to collapse
I really don't know. I formatted my hard drive and reinstalled a fresh copy of windows so I don't have any info that would be useful to you
playlet said:
I really don't know. I formatted my hard drive and reinstalled a fresh copy of windows so I don't have any info that would be useful to you
Click to expand...
Click to collapse
Wow, just for Kies
Anyway, I think you could just : unninstal kies, download ccleaner or something like that, everything 2x, restart pc, reinstall kies.
I don't mind doing that as long as the result is good
Hi! Where I can download 2.3.5 for SGS2.
Link?
Thanks!
Davor
Search Samfirmware.com for the firmware you need.
Yes, type i9100 in the site's search box and them look for firmwares for Croatia. It's there...