Hi I want to ask for help. I bought my htc touch pro 2 T 7373 from ebey but only phone with no charger.I bought HTC Power Supply model: TC P300 output: 5V-1A LPS Pin 1+ , Pin 4- .When I put it to charge , phone indicates to charge ,but battery does not charge.Battery is new and I dont think the problem is it.I want to ask you if this charger is compatible with HTC TOUCH PRO 2 T7373.
russslannn said:
Hi I want to ask for help. I bought my htc touch pro 2 T 7373 from ebey but only phone with no charger.I bought HTC Power Supply model: TC P300 output: 5V-1A LPS Pin 1+ , Pin 4- .When I put it to charge , phone indicates to charge ,but battery does not charge.Battery is new and I dont think the problem is it.I want to ask you if this charger is compatible with HTC TOUCH PRO 2 T7373.
Click to expand...
Click to collapse
Just use a miniUSB cable and plug it into your computer. Any USB wall charger should work. I've used iPhone USB chragers with a miniUSB cable, Nikon camera chargers, as well as a Motorola one. You just need to plug it into any USB port either on a wall or on your computer. Leave the device off while it charges overnight.
Problem with charged
I use both ways but no result , phone indicates to charged but battery not charging.Charger is original and consists of two parts: the charger and mini usb cable .When i run it sometimes on the displays show this message : The charging current is not enough for device power consumption.Please shut down unused applications , or switch to AC adapter. And I do not use any applications. I tried to load phone in the off position , indicates that the charger is ON but the battery is not charging .Please help if someone has the same problem
russslannn said:
I use both ways but no result , phone indicates to charged but battery not charging.Charger is original and consists of two parts: the charger and mini usb cable .When i run it sometimes on the displays show this message : The charging current is not enough for device power consumption.Please shut down unused applications , or switch to AC adapter. And I do not use any applications. I tried to load phone in the off position , indicates that the charger is ON but the battery is not charging .Please help if someone has the same problem
Click to expand...
Click to collapse
Try it with a different miniUSB cable. If you don't have one handy, miniUSB cables go for pennies on Amazon or eBay. You can find them in retail stores for about 10 dollars or so as well. If the cable isn't the problem, then it is either a problem with the charge port on the device, or the battery. It's far cheaper to trouble shoot the cable, so let's just start with that.
Sound like the charger is insufficient power, even though it says 1A. Try charging from a computer USB port and see if it charges. HTC don't list TP2 as suitable for this charger.
I am also facing same problem. LED shows charging but phone does not charge. And when I insert charger "USB TO PC" page shows up, Like I have connected the phone to PC.
Please Help...
I just had an issue charging which turned out to be an easy fix.
The led would come on and the icon would show charging but it wasn't increasing the battery %. Then I would get a message about the power not being enough and to plug it into a charger. I tried several chargers and was getting the same thing happening. I blew a few puffs into the charging port which looked clean and it was still happening. I wiggled the cable/plug in the port and occassionally the charging light would go on and off. The charging led even started to go on and off with the phone just sitting still on my table. I feared that my charging port had gone bad so I ordered 2 spare batteries and battery charger from ebay for $10 (works well and battery life good).
While waiting for the ebay purchase to arrive I did some reading up and saw that pins could be bent etc. In my fustration I used a pair of tweezers to gently scrape the charging port pins/contacts (in a straight direction). Then I used an old toothbrush and firmly brushed out the usb port - a whole bunch of lint and stuff come out of the port even though it had previously looked clean.
I plugged in my charger and bingo! My charging issue was gone.
ukexport said:
I just had an issue charging which turned out to be an easy fix.
The led would come on and the icon would show charging but it wasn't increasing the battery %. Then I would get a message about the power not being enough and to plug it into a charger. I tried several chargers and was getting the same thing happening. I blew a few puffs into the charging port which looked clean and it was still happening. I wiggled the cable/plug in the port and occassionally the charging light would go on and off. The charging led even started to go on and off with the phone just sitting still on my table. I feared that my charging port had gone bad so I ordered 2 spare batteries and battery charger from ebay for $10 (works well and battery life good).
While waiting for the ebay purchase to arrive I did some reading up and saw that pins could be bent etc. In my fustration I used a pair of tweezers to gently scrape the charging port pins/contacts (in a straight direction). Then I used an old toothbrush and firmly brushed out the usb port - a whole bunch of lint and stuff come out of the port even though it had previously looked clean.
I plugged in my charger and bingo! My charging issue was gone.
Click to expand...
Click to collapse
That was the biggest problem with MiniUSB was the width and height of those ports. It's a haven for stray dust and dirt. They need to be brushed out every so often, especially when you just drop it in you pocket.
hi buy and it schould work
buy a new charging cable
ukexport said:
I just had an issue charging which turned out to be an easy fix.
The led would come on and the icon would show charging but it wasn't increasing the battery %. Then I would get a message about the power not being enough and to plug it into a charger. I tried several chargers and was getting the same thing happening. I blew a few puffs into the charging port which looked clean and it was still happening. I wiggled the cable/plug in the port and occassionally the charging light would go on and off. The charging led even started to go on and off with the phone just sitting still on my table. I feared that my charging port had gone bad so I ordered 2 spare batteries and battery charger from ebay for $10 (works well and battery life good).
While waiting for the ebay purchase to arrive I did some reading up and saw that pins could be bent etc. In my fustration I used a pair of tweezers to gently scrape the charging port pins/contacts (in a straight direction). Then I used an old toothbrush and firmly brushed out the usb port - a whole bunch of lint and stuff come out of the port even though it had previously looked clean.
I plugged in my charger and bingo! My charging issue was gone.
Click to expand...
Click to collapse
I was facing the same charging problem and was looking for a solution. And i found this forum and read it and did the same thing and my problem is fix.. I can charge my mobile now. Thanks a lot for the great help.
Sarchy Minimum
All of these dumb charges, ie bricks in the wall, use the unused USB pins to communicate how much power they can provide. There are some resistors they put on the D-/D+ to say this is a 700ma charger or whatever. Trouble is that there are limited standards on these resistors so it's more than possible that a phone will charge but not enter high current charging when attached to a new brick in the wall. The cables however are more universal.
Related
Strange as idea but i try to post here hoping that someone can help me.
Basically i buyed times ago this desktop charger http://cgi.ebay.com/Battery-Desktop...ewItem&pt=PDA_Accessories&hash=item414fc27090
Unfortunatly yesterday i don't know what happen but it get burned.
Is it possible to connect somehow the usb cable directly on the 2 tooth where allocate the battery?
I tryed to open it and seems that only the part with Ac alimentation get burned, via usb is working as well the only problem is that opening it accidentally i removed als o the 2 small cables that go from the internal board to the thooths.
I wouldn't connect the usb cable directly to the terminals to charge the battery since USB is 5V and the battery is 3.7V without an overcharge protection circuit.
Doing without could result in damage to the USB on the computer or adapter which you are charging from. It will damage the battery and could cause a fire.
I use that exact same charger... can you explain the "burn" part? I am slightly concerned now as I leave this to charge over night while I am asleep.
SolemnWishing said:
I use that exact same charger... can you explain the "burn" part? I am slightly concerned now as I leave this to charge over night while I am asleep.
Click to expand...
Click to collapse
well i simple plugged in and started to feel a burned smell. Is not working anymore.
Desktop Charger
This will give you a dock and spare battery charger. I was bored and browsing last night and saw it. I haven't used it. I may get one myself. Deal Extreme
Here is just the charger for a little less $$ Best Offer Buy
C series serial number prime worked for three days now won't take a charge. Device will connect to pc or mac via cable, just won't take a charge. Any ideas for me?
askmattrix said:
C series serial number prime worked for three days now won't take a charge. Device will connect to pc or mac via cable, just won't take a charge. Any ideas for me?
Click to expand...
Click to collapse
there have been other threads about this. usually its the charger overheating and putting it in a ziplock in the freezer, resets it.
Mine did that too, just leave the charger and everything unplugged from the wall for a day. That fixed mine.
Sent from my ADR6425LVW using XDA Premium.
The other issue I've seen is poor contact in the USB socket on the wall adapter. I had to unplug the usb cable from the wall adapter. Then, look at the usb socket on the power adapter. The gold pins are the usb contacts. Directly opposite of them, there should be two silver prongs. I had to use a small flat blade screwdriver to pry both of them out a little further to ensure they did their job of firmly pushing the usb cable against the socket's usb contacts. Once I did, my TF201 was able to get charge from it, again.
If you decide to replace the wall charger, I believe Fry's and Office Depot stock the asus charger.
Same thing for me.. PC recognizes it as a media device, but will not charge with wall charger. Wall charger works with my HTC Phone, so it works.
I don't think it has anything to do with the latest update, since the Dock wont charge either, and there's no OS in that, right?
Just experienced this today. I have had it unplugged for about 10 hours now, we'll see if it charges.
I had the same issue few days after I got my prime. I connected my sgs to the charger and it worked. Then connected the prime and voila-works.
askmattrix said:
C series serial number prime worked for three days now won't take a charge. Device will connect to pc or mac via cable, just won't take a charge. Any ideas for me?
Click to expand...
Click to collapse
Which C model do you have? C1,2,3? Just asking.
Johnny0906 said:
Which C model do you have? C1,2,3? Just asking.
Click to expand...
Click to collapse
C1. There are some good suggestions here I need to try.
Wrap it in a towel and bang it against a table. That will fix it usually. Then get some pc heatsinks and some arctic silver adhesive and you can attach them to the charger to keep it from happening again.
The plug has two options, 5V (standard for USB?) and 15V. I used the plug on my old HTC phone (Ozone) and then plugged it back into my Prime and it worked. Thanks for the great tips guys.
Since the charger works in two modes, I wonder if some charges became confused and started dishing out 5V when they should be dishing out 15V. Thoughts?
G37 said:
The plug has two options, 5V (standard for USB?) and 15V. I used the plug on my old HTC phone (Ozone) and then plugged it back into my Prime and it worked. Thanks for the great tips guys.
Since the charger works in two modes, I wonder if some charges became confused and started dishing out 5V when they should be dishing out 15V. Thoughts?
Click to expand...
Click to collapse
Hi, I got the same problem. The charger indeed seems to be stuck in the 5V mode, since, when plugged in the tablet does get charged, even though it is not indicated, but very slowly. It is charging as if it is plugged in to a pc.
I tried plugging it into (old) phones, but I still can't seem to get it to switch back to the 15V mode.
The freezer didn't help either.
Any other suggestions?
I waited about 4-5 hours before plugging into my old phone. My other suggestion is to allow the phone to charge for a short bit (30 minutes) unplug and wait, then plug into your Prime.
I have a feeling that its a transistor toggle that isn't flipping at the correct voltage.
I've had the same problem yesterday. In my case the problem was with the charge socket on the keyboard itself. Some copper pins were deformed and that stopped the device charging. I took a magnifying glass(also for checking if any of the copper pins are bend) and a small tool to bend them back. After this it charged again. Hope this helps.
My charger suddenly stopped working from today. The Prime is detecting the connection as the screen turns ON but it is not charging. I charged my sensation using the same adapter and USB cable and it is working fine. Why can I not charge Prime via PC like phone? Is it possible? I am in India and not sure if the power adapter is easily available as Prime is not yet launched in India.
Kindly suggest.
Thanks in advance.
Hi,
I've started to have this problem today, plug it in and it does come up with the charge icon but it doesn't charge - or doesn't seem to.
However I left it connected last night from midnight until 8am this morning and it went from 13% to 17% so it is charging VERY VERY slowly although the unit doesn't actual seem to think it is.
I have it plugged in to my phone right now and its working perfectly, I borrowed the charger to my g/f last night to charge her iphone and i'm thinking this might have done something to flip the voltage as since then it isn't working.
Anyone have any ideas on this??
Kevin
thornd7 said:
The other issue I've seen is poor contact in the USB socket on the wall adapter. I had to unplug the usb cable from the wall adapter. Then, look at the usb socket on the power adapter. The gold pins are the usb contacts. Directly opposite of them, there should be two silver prongs. I had to use a small flat blade screwdriver to pry both of them out a little further to ensure they did their job of firmly pushing the usb cable against the socket's usb contacts. Once I did, my TF201 was able to get charge from it, again.
If you decide to replace the wall charger, I believe Fry's and Office Depot stock the asus charger.
Click to expand...
Click to collapse
I had this problem a couple of weeks ago and completed the same as above works well
Gilbo12 said:
I had this problem a couple of weeks ago and completed the same as above works well
Click to expand...
Click to collapse
But if the charger works fine when charging a phone it cant be the connection at fault..
It does seem to me that the power it is outputting has dropped especially the I managed to gain 5% over the course of a night where WIFI was off and screen was off even though the charge icon doesn't come up.
Is there a way of forcing the charger back in to 12v mode??
damnit... I had the same problems a few days ago and I thought it was in the cable instead of the charger... not realising the charger has to put out 15v instead of 5v.
Does this mean the Transformer won't charge with for example, my HTC charger?
I totally messed up my cable, because I thought it was broken... when I opened up the USB plug, I noticed the yellow wire was not connected anymore, but this didn't solve anything. Eventually I messed up the cable that bad, that I've ordered a new one from ebay... but when I read this... I should have just banged the charger a few times... shait.
funfair said:
damnit... I had the same problems a few days ago and I thought it was in the cable instead of the charger... not realising the charger has to put out 15v instead of 5v.
Does this mean the Transformer won't charge with for example, my HTC charger?
I totally messed up my cable, because I thought it was broken... when I opened up the USB plug, I noticed the yellow wire was not connected anymore, but this didn't solve anything. Eventually I messed up the cable that bad, that I've ordered a new one from ebay... but when I read this... I should have just banged the charger a few times... shait.
Click to expand...
Click to collapse
Has anyone actually ever managed to fix this problem? I've just contacted ASUS about it to see what they say - hopefully they'll ship me out a new charger plug or something, what a useless charger!!
I've been having a charging issue for a month or so, I'm not sure what to think about it.
Let me explain quickly, that I don't like to fill my pockets with micro usb cables or AC chargers whenever I go out. As such, I usually just acquire a few extra chargers or usb cables and just leave them where I am most likely to need them. I'm sure this is common.
Charger 1 : Samsung AC charger, came with phone. Lives by my bed.
Charger 2 : Blackberry AC charger, acquired from work. Lives in kitchen.
USB 1 : $1 cable from Amazon. Lives in the car, plugged into 12vDC lighter to USB adapter.
USB 2 : $1 cable from Amazon. Lives on my desk at home. Plugged into PC.
USB 3: Blackberry cable. Found at work. Lives at office.
On to the problem.
Somehow, Charger 1, USB 1, USB 2 seem to drain my phone. If I plug in to charge overnight and power is at 45%, when I wake up, I'm at 12% or some other number. Battery App indicates that it has been "charging" I could unplug and replug the charger a few times and then monitor the charge level, if it drops, I unplug and replug again, reboot phone perhaps, it may or may not fix the problem. Problem has gotten worse and these no longer seem to charge phone.
Charger 2 seems to have worked more consistently, but not always. Seems to have gotten worse.
USB 3 is the only cable that consistently charges without problem. It is a blackberry branded cable, much lower gauge wires (read: thicker) than the cheap $1 cables from Amazon or the Samsung OEM charger.
I've tried charging with phone off, does not seem to make a difference.
I'm running Doc Masters v6, problem was also present in v5. Since issue is same with power off, I don't believe this is a ROM issue and have not tried Odin to stock.
Is this sign of the USB port going out? Anyone tried to replace/repair microUSB or have similar experience?
About the part about replacing a microUSB port, I had to do this because my connection was getting flaky, then I messed it up altogether. I sent my phone to MobileTechVideos and they sent it back to me with the port replaced.
I may try sending it to repair. Sounds like a pretty reasonable price and quick turnaround. Dunno if I can take going back to my G1 for a week while I wait though.
Provided I don't misplace the only USB cable that will charge my phone, I should be ok for a while.
so got tired of not finding a fast charge mod so I mod the cable.
took a realy thin cheap USB cable and cut it in two. on the phone side chortsircut the data cables (white and grean) then connected the vcc+ and ground- normal.
the only reason I cut it in two was to be able to tread a shrink tube on the cable.
now I get fast charge from car and power pack and. and it works perfect.
now stop saying u need a special or expensive cable.
u need a knife and shrink tube and a heat gun (a cigaret lighter works)
and no u can't use this cable for datacynk only charge
maydayind said:
so got tired of not finding a fast charge mod so I mod the cable.
took a realy thin cheap USB cable and cut it in two. on the phone side chortsircut the data cables (white and grean) then connected the vcc+ and ground- normal.
the only reason I cut it in two was to be able to tread a shrink tube on the cable.
now I get fast charge from car and power pack and. and it works perfect.
now stop saying u need a special or expensive cable.
u need a knife and shrink tube and a heat gun (a cigaret lighter works)
and no u can't use this cable for datacynk only charge
Click to expand...
Click to collapse
Cool, thanks man, I'm gonna do that.
Why blow data when you can just get a cheap 4$ cable from newegg with 22 awg power leads. I linked it in confirmed usb cable thread. You destroyed a cable and made it special, hence using a special one instead of standard. The base is pre shorted. You increased AWG technically. Get it? You made a charge only cable, when these are special and can be had cheap anywhere. Buy a nice 4$ standard one with the right power lead awg and you can use it for anything.
...or.. Crazy idea here. Get an Android charger?
Cutting up USB cables is a bad idea, especially shorting them out. The data pins are not supposed to be shorted, generally 200Ohms is expected.
They are suppose to be shorted with fast charge... the base normally does this on plug in on AC switch. A USB3 port also does this... all he did was make a charge only cable. With fast charge 2 though, you won't make it much past 1A this way, just like USB3. Why our stock cable has thick power lead AWG and the phone can reach 1.8A.
Steamer86 said:
They are suppose to be shorted with fast charge... the base normally does this on plug in on AC switch. A USB3 port also does this... all he did was make a charge only cable. With fast charge 2 though, you won't make it much past 1A this way, just like USB3. Why our stock cable has thick power lead AWG and the phone can reach 1.8A.
Click to expand...
Click to collapse
As I said, 200ohm, not shorted... Anyway.
unless the plugg that u connect the USB cable in i sent chortcircut it won't fast charge whatever cable u use. this is for making a charge cable to use with carcharger ore power packs. of u use a wallcharger it's 99% certain it is already chotend and u don't need this. but if u use the original cable (fastcharge) it won't fast charge in a power pack or car charger.
and I charge att same speed with this cable then original charger cable that came with the phone. measured 1.8a with this cable that's all my Powerpack can output. can probably go higher depending on how mutch the phone can use.
it's li-po so should be able to charge 0-100% in 20min but whill shorten battery life and don't think oer phones can handle it
I fast charge with 3 different cables. Again, it's the AWG. Facts don't lie. My power pack and car charger are pre shorted, so all good. If not pre shorted though, you are correct sir.
my wasn't that's why I made this. so no matter what cable used it won't fast charge. Som people also say u have to by a expensive cable with is bull####
if someone can provide a link with a preshortens cable... well then show it. unable to find any
It is legit. I did this with a car USB cable when I had my One X. It would only charge at USB rate (500ma) even though it was a 1A charger. Using navigation the battery would discharge faster than it charged. Tried various cables, and only got it to work by shorting the data pair. After that it charged AC at full 1A.
maydayind said:
my wasn't that's why I made this. so no matter what cable used it won't fast charge. Som people also say u have to by a expensive cable with is bull####
if someone can provide a link with a preshortens cable... well then show it. unable to find any
Click to expand...
Click to collapse
Several available on Amazon:
http://www.amazon.com/s/?ie=UTF8&keywords=usb+charging+only+cable
Not always. My car cigarette adapter is modded to short data pins. It fast charges all my other devices and even my tablets, but doesn't even charge my G2. It says its charging, no slow charging messages, but still depletes battery. Only way toncharge in my car is to use the second USB port that is unmodded, which slow charges. Annoying.
I still think there is a software bug limiting the charging speeds because you can get different speeds by plugging in the same cable mulitple times.
-sent from my LG G2 using XDA Premium 4
We aren't saying you are wrong, you are just doing something different. It's not about expensive, its about thickness for the combo usb cable. Just the awg. What your solution does is increase awg. They are called charge only cables (pre-post short). What people were searching for are COMBO cables. You are using/doing something different. Why titles are called "working USB" cables, not charge only. We already knew this. There is bugs. That was apparent in the voltage testing. Something in the kernel isn't playing right at all times. I have seen this on my car charger. With no change in conditions, I can sometimes charge 200mA's higher with a replug.
player911 said:
Not always. My car cigarette adapter is modded to short data pins. It fast charges all my other devices and even my tablets, but doesn't even charge my G2. It says its charging, no slow charging messages, but still depletes battery. Only way toncharge in my car is to use the second USB port that is unmodded, which slow charges. Annoying.
I still think there is a software bug limiting the charging speeds because you can get different speeds by plugging in the same cable mulitple times.
Click to expand...
Click to collapse
The included home charger for the G2 is rated at 1.8A -- use anything smaller, and you'll see the pop up warning on the phone that charging will be slow and that you should use the "official" charger.
My guess -- if you can find a car charger that actually will put out as much as the phone wants to draw (e.g., 1.8A), and THEN use your shorted data lines, you'll see fast charging of the G2 in your car.
jonstrong said:
The included home charger for the G2 is rated at 1.8A -- use anything smaller, and you'll see the pop up warning on the phone that charging will be slow and that you should use the "official" charger.
My guess -- if you can find a car charger that actually will put out as much as the phone wants to draw (e.g., 1.8A), and THEN use your shorted data lines, you'll see fast charging of the G2 in your car.
Click to expand...
Click to collapse
The 3SIXT micro USB charger I have is rated to 1A not modded, just bog standard. When charging I checked the battery stats and it says AC charging. Now I don't know if it has the data pins pre-shorted, but it managed to boost my battery by 10% in under 20 minutes. The phone was idle, but that's not bad going for a 1A $10 charger.
seems like the moderators did a god job deleting som posts.
just want to say I'm a sorry for my bad manur/attitude/language.
keep the input comming
here is another thread about the topic on another device
* *http://forum.xda-developers.com/showthread.php?t=2292373
maydayind said:
so got tired of not finding a fast charge mod so I mod the cable.
took a realy thin cheap USB cable and cut it in two. on the phone side chortsircut the data cables (white and grean) then connected the vcc+ and ground- normal.
the only reason I cut it in two was to be able to tread a shrink tube on the cable.
now I get fast charge from car and power pack and. and it works perfect.
now stop saying u need a special or expensive cable.
u need a knife and shrink tube and a heat gun (a cigaret lighter works)
and no u can't use this cable for datacynk only charge
Click to expand...
Click to collapse
Cool, thanks man
jonstrong said:
The included home charger for the G2 is rated at 1.8A -- use anything smaller, and you'll see the pop up warning on the phone that charging will be slow and that you should use the "official" charger.
My guess -- if you can find a car charger that actually will put out as much as the phone wants to draw (e.g., 1.8A), and THEN use your shorted data lines, you'll see fast charging of the G2 in your car.
Click to expand...
Click to collapse
not true have tried 3 other chargers 1.2 1.0 and 0.8 all say fastcharge (ac) with my modes cable. as long as it's over 500ma and with a cable with data pins shortend the slow charge warning is removed an the phone thinks it's charging from ac
charging my phone now with a Powerpack with 1a output and it says fastcharge (ac)
if I use the original cable it goes to slowcharging 500ma iv meshurd befor I put on the shrinking tube for isolation
and a car charger can output in theory 5-20a depending on your fuse in the car
the charging current is controlled by kernels in so phone. my old sensation u culd mod with a fastcharge Kernel so it never limited to 500ma always use max.
Samsung even has the ability to do a full charge in 30min but disabled in Kernel.
lg - g2 uses lipo battery's and culd actually be charged in less then 20min but if we do that u have to replace the battery every 6month at the best.
and lipo are extremely sensitive to over charge and the cells have to be charged with precision balans not to explode or swell.
Hi,
So I've got a brand new phone very recently: less than 7days ago.:
I'm overall very satisfied, the battery holds charge for 3 days of normal use etc, but I'm having an issue with the charging;
I'm using Oukitel's OEM Cable and wall adapter and get approx 25% with 8-9h of charging. It's worth noting that the "flash charge" worked the first time, getting me from 30% all the way up to 60 in maybe 2h (supposed to be a ........9V2A/12V 1.5A charger), I then unplugged it to get to work. Data pins do work well, I'm able to transfer files and the phone recognises if it's plugged over AC or USB. I'm having the exact same speeds as my 5V 2.3A wall adapter, so i'm thinking the flash charging doesnt work at all anymore.
I have factory reset the phone 3 times now and unplugged the wall adapter for exended period of times to empty capacitors.
I'm really out of ideas and don't really want to send it back because of the cost and time (almost took a month to get there!)
I've sent a message to the support a couple days ago but no answer yet, I think it's hopeless. Anyone having better ideas than me?
I'd really appreciate ANY feedback, even if 20% get me through the day easily.
Thanks for your time.
PS: The phone doesnt heat up AT ALL while "charging" with any of my adapters, including OEM, and i'm having no other type C cable to test with.
I guess the Charger's data pins could be the issue, I have taped data pins of my usb cord and the phone thinks it's charging over AC everywhere, I don't know what to do to verify this though.
(edit) By touching the USB cord, i've noticed window's disconnect sound, I think the cable could be not stable enough and "disconnect/reconnect" with the charger often enough that the flash charge doesnt kick in, I'll try different positions tonight and keep this updated.
OUKITEL K10000 max
That was the cable, bought a fast charge adapter and cable and it now works. Using new cable on old charger works. To anyone having the same issue, just buy a new cable. z