Why is it there is some contacts.apk has a decent high volume and there is some other contacts.apk has a very low volume such as Xperia Arc dialer.
Is there any way to increase the in-call volume for any contacts.apk ?
please help !!!
thanks in advance
hm wrong section?
machhho said:
Why is it there is some contacts.apk has a decent high volume and there is some other contacts.apk has a very low volume such as Xperia Arc dialer.
Is there any way to increase the in-call volume for any contacts.apk ?
please help !!!
thanks in advance
Click to expand...
Click to collapse
which contact have decent volume?
Before this thread gets moved to the proper forum...(The Q&A forum)
Try downloading dsp manager
gregbradley said:
Before this thread gets moved to the proper forum...(The Q&A forum)
Try downloading dsp manager
Click to expand...
Click to collapse
LO, did you read the comments on that app in the market? Waste.
highaltitude said:
LO, did you read the comments on that app in the market? Waste.
Click to expand...
Click to collapse
works for me...i have louder sounds when i use it.....
Moved to proper forum.
hmmmmmm.. did the manager really work??
is there is any tweak to increase the volume without apps
More and more speaker volume
If you want to increase your speaker volume, you can try:
1) Look at your screen. Is the plastic screen protector closing the speaker hole (above the logo "Sony Ericsson")?
2) Look at your sound settings. The hardware buttons aren't always good enough for this. You can use some app like "Volume Control +" or "Quick Settings" (both free at the Market), or "AudioManager", or any other solution that lets you see all your volume options.
3) You can also install the free attached equalizer DSPmanager.apk. After activate it (checking the proper box), you need to raise up the bars that corresponds to the frequencies you want to boost. Some people say it doesn't work, some people say that it helps a lot.
4) As a last option you can install the free attached AudioHack.apk. In my case, it worked with "V2" + "Push". See which button (V1, V2 or V3) plus "Push" can increase your volume.
5) If none of the above works for you, maybe you just have to put up with using the earphone all the time. Some people find the earphone cool.
Related
I was hoping we could start a new thread about the increase of sound volume for the Xperia mini models.
How can we override the default sound volume when using headphones, or even better, increase the volume at the front speaker during call?
PowerAmp, a music player available on the Market does have the functionality of increasing the volume while listening to music with headphones, so what can be done at the development side and level of tweaking the sound settings without having to escape to third party software?
As a former owner of Sony Ericsson P1i, we used to adjust the fairxxxx something settings, even thou only a Symbian phone. But now I looked into the root sound settings of the SE mini pro, and it has similar structure and arguments somehow?
Please use this thread to discuss volume increase level of our beloved phones.
-
Install Owain's Cm6 or CM7 goto menu -> DSP settings -> you are done with separate settings for speaker and headphones
Sp4rrow said:
Install Owain's Cm6 or CM7 goto menu -> DSP settings -> you are done with separate settings for speaker and headphones
Click to expand...
Click to collapse
Thank you for your answer, but my thread is about hacking the original SE ROM.
Can the DSP setting of Owain´s mods be applied to Android original 2.1 somehow, then we start talking?
Try to install this and check if it works.
Sp4rrow said:
Try to install this and check if it works.
Click to expand...
Click to collapse
Nope, did not work. Only compatibel with 2.2 and 2.3 as far as I can tell and tried
But if PowerAmp can manage it on 2.1, we can too, right? Come on, it is in the instructions of the root somewhere. Please help!
Hi all
I am back again.
You guys must be thinking how creep i am posting new problems daily
But hey!
it just cant be helped.
Well...
moving to the problem...
I just installed THIS sound mode.
I downloaded the zip archive named "63_sound_mod - max vol = 63" from HERE
It works perfectly fine!!!
Indeed the sound boost is awesome.
But i have one problem with this....
The mod disables key touch sounds (like when we click any icon/app or click on any button like the HOME button) and camera sounds.
Please, i want to enable these sounds.
Is there any way?
I already replaced Original Volume.db. Still no change. It seems its XML file.
But i also need the loud volume.
So can anyone please tell me way with which i can use the louder sound mod without disabling camera and key press sounds?
Jaskaran498 said:
Hi all
I am back again.
You guys must be thinking how creep i am posting new problems daily
But hey!
it just cant be helped.
Well...
moving to the problem...
I just installed THIS sound mode.
I downloaded the zip archive named "63_sound_mod - max vol = 63" from HERE
It works perfectly fine!!!
Indeed the sound boost is awesome.
But i have one problem with this....
The mod disables key touch sounds (like when we click any icon/app or click on any button like the HOME button) and camera sounds.
Please, i want to enable these sounds.
Is there any way?
I already replaced Original Volume.db. Still no change. It seems its XML file.
But i also need the loud volume.
So can anyone please tell me way with which i can use the louder sound mod without disabling camera and key press sounds?
Click to expand...
Click to collapse
Any answers please
Cmon guys!
Someone please reply.
I dont think tht its so much complex problem that no-one knows answer
Hey!! frndss.. i m here with a application called volume + . this application helps to fixing the low headphone volume bug in cm7
Requirment :-
Only ur SGY with cm7 :silly:
steps :-
1. install apk
link :- is removed
1. open volume + go to Headset settings
2. then click on Audio modifications + set ur baas bood mode ( i set it to + 8 )
3. then set ur echo/delay ( optional)
4. then click on use custom eQ settings + set ur equalizer :silly:
all bands shoud be more then 80 to get best sound and important set ur volume level high :good: in eq setting.
how to use :- play any song u want then go to volume + and increase volume level and see d diffrence :good:
This is on d basis of my experince and i m sharing this only for helping members who r suffrng from low volume bug. if anybody dnt like or dnt get any diffrnce sorry for that and if u feel any difference in ur volume bug after installing please press thanx :good: :laugh:
Note :- some times volume + may b not work so go again in setting just drag volume level and its work again
Fc !!!
sent from my dream using cm10.1
rmp07 said:
Fc !!!
sent from my dream using cm10.1
Click to expand...
Click to collapse
noooo
remove the link for app!its an paid app /warez! no offence
percy215 said:
remove the link for app!its an paid app /warez! no offence
Click to expand...
Click to collapse
k..percy :good:
Fc on hyperion:sly:
sent from my dream using cm10.1
where is link?
where is link for app yarr?
Rakesh251 said:
where is link for app yarr?
Click to expand...
Click to collapse
link is paid app /warez! so maybe removed
Just info
the dev of volume hack give the app for free at androidaudiohacks.com
rmp07 said:
Fc on hyperion:sly:
sent from my dream using cm10.1
Click to expand...
Click to collapse
hyperoin is cm7???
Rakesh251 said:
where is link for app yarr?
Click to expand...
Click to collapse
sorry bro... percy said this is paid app so i remove link... N yess this is paid app on google play . jst use google search button to find dis app.. may b u will get free
name of the app ?
anubhavrev said:
name of the app ?
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=com.TEST.android.lvh&feature=search_result
this originally cmes installed in infinity rom by hacker.
but there are some issues in silent mode too
is it work??
:cyclops:is it surely work bro??? i want to port my rom to cm7
Rakesh251 said:
:cyclops:is it surely work bro??? i want to port my rom to cm7
Click to expand...
Click to collapse
yess !!! try N feel d diffrence
press thanx if i hlp U
If volume+ is a paid app....
Get volume - then
Trololololololol
么 动态 看浓雾 哇哈他 团伙 么按时
it does work tested and its works more than fine
in 2 minutes i upload the free version2,i have account there a long time.
VOLUME+
Volume+ is an application for Android Devices running Gingerbread (2.3) or higher which allows you to boost the maximum volume for Ringtones, Alarms, Message tones, etc. It is essentially a heavily modified DSP Manager which has been completely rewritten from scratch. Because of this it is strongly recommended that you remove one of them to install the other.
It does this by exploiting the EQ settings (AudioEffect.api) included in Gingerbread, and because of this, it may be unstable on some devices.
Please note that this application will not work to its full potential on phones running Stock (unmodified) software. I strongly suggest that if you are going to ‘root’ your phone that you flash CyanogenMod7 or higher and remove the built-in DSP Manager.
I also will not be held responsible for anything that may happen to your device as a result of running this app. Please see my disclaimer for more information.
Features
Phone Speaker / Headset / Bluetooth:
* On/Off toggle
* Volume Boost
* EQ pre-sets
* Bass Enhancer
* Stereo Widener (only for Headset/Bluetooth Headset)
* Virtual Room Effect (VRE – Echo)
In-Call:
* Volume Step Changer (The number of volume steps between 0 and full) ROOT ACCESS REQUIRED
Requirements
* An Android device running Gingerbread (Android 2.3) or higher
* Custom ROM (Not fully required but is HIGHLY RECOMMENDED)
* Root Access (Required for In-Call settings, NOT for anything else but is HIGHLY RECOMMENDED)
Instructions
This mini guide will help you to get the most out of Volume+!
If you are running this on a device which has ICS, you may need to enable Volume+ in the “Media Effects” menu. Don’t worry if your device doesn’t have this option, it shouldn’t be necessary.
Once Volume+ has asked you to do this, you should end up at the main menu, which has 4 options:
Speaker Settings
Headset Settings
Bluetooth Settings
In-Call Settings
Speaker Settings will allow you to modify the EQ of the external speaker and will allow you to boost the volume considerably. To do this, get some music playing in the background and open the Speaker Settings menu. Enable the “Audio Modifications” check box and then set the “Volume Level” to about +10. You should notice a boost in volume. You can then start raising the Volume Level until you notice either the volume getting quieter or the volume doesn’t change. You’ve now found your current device’s volume limit (this limit is not device dependant and instead depends on your current firmware. Flashing a CyanogenMod ROM will allow you to push the volume much higher.
Once you have found your device’s limit, you can start changing the other values (such as EQ preset and Bass Boost) until you find a combination that works for you!
Headset and Bluetooth settings are identical to the speaker settings but apply to the wired headset and Bluetooth headset respectively.
The In-Call settings are different; they don’t allow you to boost the In-Call volume but instead give you much more control over the volume. You WILL need Root Access to alter these settings as they modify your phone’s build.prop (system/build.prop). With this tool, you can increase the number of volume steps (how many times you have to press volume up/down to get from one end of the scale to the other) to whatever value you want between 6 and 100. Whilst the value is completely down to personal preference, setting it to 100 is certainly not recommended.
Its version 2beta.
Hi guys, today I just bought a used Sony Z2, and unfortunately the bottom speaker makes some cracking and popping noises when the music is loud.
Can I change something like a balance in the phone settings so when I listen something (YouTube, music, ringtone) on the speakers the bottom speaker recives lower decibels, so I won't hear those cracking noises, while the upper speaker works at full potential?
Help would be much appreciated.
PS: for headphones I would like the balance to remain untouched.
THANKS.
jok3r4u said:
Hi guys, today I just bought a used Sony Z2, and unfortunately the bottom speaker makes some cracking and popping noises when the music is loud.
Can I change something like a balance in the phone settings so when I listen something (YouTube, music, ringtone) on the speakers the bottom speaker recives lower decibels, so I won't hear those cracking noises, while the upper speaker works at full potential?
Help would be much appreciated.
PS: for headphones I would like the balance to remain untouched.
THANKS.
Click to expand...
Click to collapse
hello test this http://forum.xda-developers.com/xpe...xxx-lolli-pop-sound-mod-v2-boom-mode-t3114000
xrenoix said:
hello test this http://forum.xda-developers.com/xpe...xxx-lolli-pop-sound-mod-v2-boom-mode-t3114000
Click to expand...
Click to collapse
I'm flashing it as we speak.
LE: nope, still that cracking noise. If i let the volume around 60% everything is fine, if I rise it higher, that sound comes from the bottom speaker. I need to find a way to reduce just the bottom speaker volume, while using the full capacity of the top one.
jok3r4u said:
I'm flashing it as we speak.
LE: nope, still that cracking noise. If i let the volume around 60% everything is fine, if I rise it higher, that sound comes from the bottom speaker. I need to find a way to reduce just the bottom speaker volume, while using the full capacity of the top one.
Click to expand...
Click to collapse
modify mixer_paths.xml in system/etc/ or ask help @zohaib0001 http://forum.xda-developers.com/xperia-z2/themes-apps/sound-mod-xperia-z2-android-4-4-4167-t2929709
thanks. tried to look on that file myself, but couldn't figure what to change..??
I'll ask @zohaib0001 if he can help me.
jok3r4u said:
thanks. tried to look on that file myself, but couldn't figure what to change..
I'll ask @zohaib0001 if he can help me.
Click to expand...
Click to collapse
@jok3r4u
Ok i will make file for you but it need some time......
Right now i am working on my sound mod then i will start making this mod for you, its also need lot of testing so give me five to ten days
i will report you when i make it
zohaib0001 said:
@jok3r4u
Ok i will make file for you but it need some time......
Right now i am working on my sound mod then i will start making this mod for you, its also need lot of testing so give me five to ten days
i will report you when i make it
Click to expand...
Click to collapse
If you could just tell me which values should be moddified in mixer_paths.xml for volume I would do it myself, especially because I don't know how much I should decrease the bottoms speaker volume to sound good.
jok3r4u said:
If you could just tell me which values should be moddified in mixer_paths.xml for volume I would do it myself, especially because I don't know how much I should decrease the bottoms speaker volume to sound good.
Click to expand...
Click to collapse
Its need to change in these four files.
go to system / etc / tfa98xx
and find these four files
1- HiFiSpeakerRing_btm.eq
2- HiFiSpeakerRing_btm.preset
3- HiFiSpeakerRing_top.eq
4- HiFiSpeakerRing_top.preset
And you also need to change so much values in mixer_paths.xml can't tell right now i did not test them.
Or
In xperia Z2 forum there is one great developer name niaboc79 He is master in this field. you can ask him also.
zohaib0001 said:
Its need to change in these four files.
go to system / etc / tfa98xx
and find these four files
1- HiFiSpeakerRing_btm.eq
2- HiFiSpeakerRing_btm.preset
3- HiFiSpeakerRing_top.eq
4- HiFiSpeakerRing_top.preset
And you also need to change so much values in mixer_paths.xml can't tell right now i did not test them.
Or
In xperia Z2 forum there is one great developer name niaboc79 He is master in this field. you can ask him also.
Click to expand...
Click to collapse
what can I use to open and edit the .eq and .preset files?
@zohaib0001
hei, I tried to play with various values from the mixer_pathx.xml, but nothing seems to work.
I changed my mind and I thought that if its possible to rise up the volume, it should be possible to lower it down right?
so, could you point me which lines from mixer_paths.xml determine the volume for the external speakers in all situations (ringtone, playback, speakerphone) so I could lower thrm down, so I won't have any problem at high volume.
Thank you!
Fixed!
https://forum.xda-developers.com/mi...ume-stable-t4070111/post82070029#post82070029
Same here, max volume on this phone is really low. Volume booster apps are able to increase it, but it's not a convenient way to do it and sound is bad, and I have absolutely no trust in this kind of app.
Tried modding mixer path like OP with no success so far.
gunmoule said:
Same here, max volume on this phone is really low. Volume booster apps are able to increase it, but it's not a convenient way to do it and sound is bad, and I have absolutely no trust in this kind of app.
Tried modding mixer path like OP with no success so far.
Click to expand...
Click to collapse
Ok
No luck either. Tried Viper4Android, maxing Gain in the Speaker tab, no effect. Something is wrong, there must be somewhere a setting that overrides the standard Android volume control...
Yea.. Seems like no one will help us with this problem..any way i will made a thread.. That will work for sure..
https://forum.xda-developers.com/mi...ume-stable-t4070111/post82070029#post82070029
I made this thread today.. I think îs the only way to increase the speaker. ? Must see and tell me your opinion
I teste it for a month.. And I posted this question to see if anyone got something.. So if no one got something.. I made my own thread about it
try to use kernel support sound control. maybe can help to increase volume
1cecreamm said:
try to use kernel support sound control. maybe can help to increase volume
Click to expand...
Click to collapse
It s hard to find one, due to compatibility with android 10.. And stock rom miui.. I made a thread that is more simple and no kernel required. I installed some kernels result in boot loop ? so there is no way to try again ?