I just tried updating to ED04 with OTA and now my fascinate just gets stuck in a restart loop (Samsung Logo Comes up then goes away and comes back up again and dosent move on) I am going to try to odin back to DL09 tonight but any ideas.
Sounds like you might just need to reinstall the ROM.
When I messed up my ED04 update last night I was getting a phone-!-computer image on the screen, not a boot loop.
Were your running a voodoo kernel before? I have messed up a kernel and gotten the boot loop before
Flashed back to dl09 and trying to update to ea28 and the last 5 times it has failed
Hi All. My phone is not showing on my computer now. I did OTA update a couple of hours ago and my phone isn't being recognized. It says that the drivers aren't installed even though they are. Not sure what to do now. I can't even get into ODIN because it won't go into download mode. Thanks to anyone who responds. Oh it's rooted, but bloated.
mstrina81 said:
Hi All. My phone is not showing on my computer now. I did OTA update a couple of hours ago and my phone isn't being recognized. It says that the drivers aren't installed even though they are. Not sure what to do now. I can't even get into ODIN because it won't go into download mode. Thanks to anyone who responds. Oh it's rooted, but bloated.
Click to expand...
Click to collapse
Did you try plugging usb cord into outlet like charging it and then trying to put it in download mode? From what i hear sometimes that is a solution to getting back download mode. There are also download jigs that you can buy on ebay or amazon that can get you into download mode.
pull battery on phone.....plug usb into PC. Open Odin.....then hold down the volume down button and plug in the usb into phone.....continue to hold volume down button until it goes into download mode
Jd and Vinnie,
I havent tried plugging into the wall to attempt download mode. Will this allow the computer to recognize my phone? Ive been reading several different fassys doing this. Ill give it a shot. Each time I plug in comp it says device malfunction not recognized. Thankd for your suggestions
Update. I did the plug in wall and it didnt work..:-(...im stuck. Cant get back to stock because odin ans computer wont recognize my phone.....
Sent from my SCH-I500 using Tapatalk
for some strange reason people have reported that the opposite volume button will work sometimes.. idk why it would switch, but did you try holding volume up and plugging into odin?
tapatalked from my stock VZ Fascinate
Anoninja, ill try anything at this point now.
Sent from my SCH-I500 using Tapatalk
edit- it didn't work.
Just for the hell of it can you plug your phone into another computer to see if your phone shows there. Maybe you have to download the samnsung drivers again.
hey fitti,
i tried that already... :-(
hmm geez what havent you tried. I am lost for thoughts then. have you asked this question in IRC? maybe someone in there has idea
I will ask there i am in the rooms now
When I plug it in. It says "one of the usb devices attatched to this computer has malfunctioned and windows does not recognize it". And I have 3 comps. two laptops and a desktop all the drivers are on there. It seems like my problem came about after I OTA'd to be back on stock and then upgrade to new radio. I'm only instock recovery and I can't get my comps to recognize my phone. I don't know what to do.
yea tell me about it. I'm not too good accessing IRC. With some guidance I'm sure I'll manage. Thanks for checking. I appreciate it.
Landshark says to try this - reboot phone while it is connected and usb debugging is enabled
fitti28 said:
Landshark says to try this - reboot phone while it is connected and usb debugging is enabled
Click to expand...
Click to collapse
Hey it didn't work. a box keeps popping up about the usb device attatched malfunctioned and windows does not recognize it. :-(.
Have you rebooted this machine? have you uninstalled the drivers and reinstall? did you try other usb ports on this machine?
Try uninstalling the drivers and installing these:
http://www.megaupload.com/?d=NZS8BF7E
fitti28 said:
Have you rebooted this machine? have you uninstalled the drivers and reinstall? did you try other usb ports on this machine?
Click to expand...
Click to collapse
Hey fitti,
I just plugged into another port. The comp has been rebooted 3 or 4 times. Let me try the drivers again. I believe I did that already.
landshark68 said:
Try uninstalling the drivers and installing these:
http://www.megaupload.com/?d=NZS8BF7E
Click to expand...
Click to collapse
Thank you so much for walking me through this. I really appreciate it. . I'm downloading drivers now.
Related
ODIN or my laptop wont recognize my vibrantttt...i already downloaded the rite drivers... and KIES and KIES mini ... i tried evryting switching USB ports opening and closing ODIN rebooting my phone clearing cache and data and nothing... and i no its noy hardware lockd kuz i kan easily go to recovery and download mode... i even tried it in a diffrent PC and nothing... it chages and evryting .. the only problem is .. wen i turn it on.. it stays in the smasung vibrant boot up screen..... n no i cant put debbugin USB because it wont load up the phone... any helppp plzzz
how exactly are you doing it? kindly post your procedures you might doing something wrong.
kush815 said:
i already downloaded the rite drivers...
Click to expand...
Click to collapse
Are you SURE that you download the RIGHT drivers?
lol
try this:
Open Odin (As admin, if on vista/win7)
Get your phone into DL mode.
Plug it in, watch for a COM port. If none show up within the minute unplug & replug (And DON'T close Odin this time)
iynfynity said:
how exactly are you doing it? kindly post your procedures you might doing something wrong.
Click to expand...
Click to collapse
Yeah, I'm with master... you sure you got the right drivers??
check out my thread here.. I had troubles with odin at first and as I figured out what i was doing wrong I updated the post. It pretty much walks you through what to do and directs you to different threads that deal with odin, the files needed, and what to do to make it all work.
If usb debugging was not enabled and you can't boot up the phone, you are screwed. I had the same thing happen to me. Sorry.
You shouldn't need USB Debugging if you are getting into download mode... I had the OTA JI6 update freeze my phone at the Vibrant screen. I was stock, unrooted, no debugging, and my phone is less than 2 months old.
I was able to get into Download mode by pulling battery (since power off didn't work), put battery back in, hold down volume up + volume down buttons, plug USB into computer, plug USB into phone and download mode came right up...
I then unplugged the USB from the computer and opened ODIN.
Plugged the USB back into the computer and ODIN recognized it... ran the JI6 ODIN update and it soft bricked with the computer ! phone logo... simply ran through the same procedure to get back into download mode and re-flashed with ODIN and it worked fine after that!! No data loss or anything!!
You just have to keep trying... you may think you've tried everything, but try it all again because doing it a second time, you may get lucky and it works.
Good luck!!
i picked it up used with stock rom, no mods. i rooted, then installed nero v3 with voodoo and then v5 with voodoo.... then i tried a custom battery mod and it screwed my phone up... cant get past the vibrant start screen, cant read the ext sd and the phone drivers will not work... computer detects it, but no drivers are installed. i have used the 32 bit driver 64 bit drivers, kies, kies mini, odin v1 and v1.7, still nothing... i can get into cwm recovery, but only with voodoo enabled, and can get into download mode, but i cant seem to get the computer to read it. have used 4 different computer, win 7 and 32 bit xp....also have tried drivers with pdanet and easy tether, but still no luck... can you offer any help to me??? thanks in advance.
as of u have done so much and nothing helped i would cry , and for not readin on how to unbrick your phone right on top of the forum you should cry too .
and if look good enough every 3rd thread that is made is how to unbrick the phone
@bartek
OK...OMG dude... you had like 5 posts 3 days ago...how are you helping this individual out other then giving him all your illegible ramblings that you are posting and ridiculing individuals as you go .. I'm sry, I don't mean to rant but damn...
Anyway OP, your just soft bricked. If you can get into d/l mode then I would either go ahead and ODIN back or if you can get into CWM recovery and you still have Nero 5 in your root, I would just reflash it and it should take care of it...enable voodoo when you flash Nero 5 ..you should be ok.
First off, I have been searching the forums for almost two weeks now and cannot find a solution....I have tried everything......the first problem is that no matter what drivers I use, the computer still says usb device not recognized, so I cannot get odin or heimdall to communicate, neither kies or kies mini.....
Well, now I turned it on this morning and I cannot get into cwm or dload mode.....just keeps bootlooping and linda talks and says riskful operation, then reboots......I am lost, don't know what else to do, I'm gonna throw this phone out the window
Sent from my HTC Vision using XDA App
bouzouki said:
First off, I have been searching the forums for almost two weeks now and cannot find a solution....I have tried everything......the first problem is that no matter what drivers I use, the computer still says usb device not recognized, so I cannot get odin or heimdall to communicate, neither kies or kies mini.....
Well, now I turned it on this morning and I cannot get into cwm or dload mode.....just keeps bootlooping and linda talks and says riskful operation, then reboots......I am lost, don't know what else to do, I'm gonna throw this phone out the window
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
I would say Odin is your friend. go back to stock and start over Here is a start
http://www.youtube.com/watch?v=KyAIUOYufrU
Part 2: http://www.youtube.com/watch?v=33I-aNCypVM
hope this helps you
no dont throw the phoine out give it to mee ! or u can just remove your battery while phone is hooked up to computer with usb push volume up and volume down hold it put battery in , yellow android showed up ? u good to odin if he didnt redo repeat those steps until u will see him
how can i get odin to communicate when the computer wont read it?? it says usb device not recognized and no matter which drivers i install, it wont communicate.... and plus odin wont connect, i have tried multiple times.....heimdall drivers wont install either, it gives me a failed result.... i have used the 32 bit drivers, 64 bit drivers, kies, kies mini for vibrant, odin, heimdall, everything.... i have a g2 and have done so much to it with no problems, this phone has got me confused...
u need damn download mode for odin to see your phone damn could you just do those steps that i told you ? and btw open up odin so u can see when u phone is detected it will light up i nyellow
onc3 again
1. phone connected to computer
2.odin open
3.take out battery (out of your phone)
4.hold volume up volume down (allthe time)
5.put battery back in
6. put files in odin flash back
bouzouki said:
how can i get odin to communicate when the computer wont read it?? it says usb device not recognized and no matter which drivers i install, it wont communicate.... and plus odin wont connect, i have tried multiple times.....heimdall drivers wont install either, it gives me a failed result.... i have used the 32 bit drivers, 64 bit drivers, kies, kies mini for vibrant, odin, heimdall, everything.... i have a g2 and have done so much to it with no problems, this phone has got me confused...
Click to expand...
Click to collapse
I gotcha.... not to sound like an idiot but have you tried a different usb port? If your using one on the front, try ones in the back if your on a desktop.. if that doesnt work try running ODIN in XP SP3 compatibility mode
bartek25 said:
u need damn download mode for odin to see your phone damn could you just do those steps that i told you ? and btw open up odin so u can see when u phone is detected it will light up i nyellow
Click to expand...
Click to collapse
I think he's saying that odin doesn't detect his phone and therefore doesn't light up yellow. Happened to me too. I'm on the epic. I tried everything. But odin finally found my device. Try different usb ports, a different wire, reboot both phone and pc. Switch between usb debugging on and off. Try it with sideloading enabled and not. I eventually found a combimation that worked. These phones are fickle. It'll work eventually.
Sent from my SPH-D700 using XDA App
+1 on what he said above try connectin and disconection your phone lots of times 2 forgot it happend to me too once .sorry it was a while ago
i have used front usb ports, and the back ones, have even used 3 different computers. but same result. will odin connect even if the driver are not installed correctly and the computer doesnt recognize the usb device? and also, now i have the problem where i cannot get the phone into dload mode, it keep bootlooping to the samsung vibrant start screen and linda says riskful operation.
bouzouki said:
i have used front usb ports, and the back ones, have even used 3 different computers. but same result. will odin connect even if the driver are not installed correctly and the computer doesnt recognize the usb device? and also, now i have the problem where i cannot get the phone into dload mode, it keep bootlooping to the samsung vibrant start screen and linda says riskful operation.
Click to expand...
Click to collapse
As far as I know, ODIN wont recognize your phone without being in download mode and drivers installed on your computer.
bouzouki said:
i have used front usb ports, and the back ones, have even used 3 different computers. but same result. will odin connect even if the driver are not installed correctly and the computer doesnt recognize the usb device? and also, now i have the problem where i cannot get the phone into dload mode, it keep bootlooping to the samsung vibrant start screen and linda says riskful operation.
Click to expand...
Click to collapse
No I believe you need the correct drivers installed. At this point either your missing something or don't have the correct driver to install. Maybe someone can point out where all the proper drives are for you to download
speachless ....if u wont follow what i wrote im helpless.goodbye. and why u turning your phone on dude download mode is battery out phone connected to ANY usb port hold vol up vol down hold all time and puit battery in
if that doesent help your phones usb is **** or the cable is ****
btw, i have tried installing all the proper driver from the proper threads... 32 bit, 64 bit, ive tried kies and kies mini for vibrant, heimdall drivers also.... NOTHING WORKS...
i appreciate everones help... thank you.
This is what I do to get it working. I open odin first and load all the needed files.
I then plug the usb cord into the usb first before plugging it into the phone.
with odin open and the phone completely off. I hold down the volume rocker and plug in the usb. I get download mode to work almost everytime.
For me the stock cable I got with mine doesnt work. I have to use a different cord or it acts like it doesnt see my phone.
As the title says.... I am currently running ZenDroid 2.0.1. Before flashing this as always I start off fresh by Odining back to stock then proceed with whatever rom is to my pleasing that week... I have tried using different cables. I have also tried a PC and a MAC running Parallels(VM). I also tried Hiemdall on both. All still no luck. I have googled and all I find is the suggested above. I also tried getting into download mode in all ways I know possible to see if Odin might possibly recognize it. (Holding volume buttons while plugging into PC, Up+Power button, AIO reboot into DL mode, selecting Download from power menu and even using a JIG.
If anyone else has any other suggestions or if I missed something, please LMK??
Thanks in advance for taking the time to help
Sent from my SGH-T959 using XDA App
I think what you need is:
Latest odin v1.85
Latest Samsung drivers
And another usb cable to try.
the method you use to get in download mode should not make a difference - if you're in download mode - you're in download mode.
Does your computer recognize your phone when the phone is booted up? Can you connect and transfer files, etc.? If so - your USB cable and connectors are good, and your problem is likely related to not having the drivers installed.
if you're trying this on a new computer - one you haven't ODIN'd your phone from before, make sure you have the samsung drivers installed.
If you can't even transfer files, etc. - try a new USB cable - and NOT one that came with a charger (some of those are not actually USB cables - they can only charge your phone). You can get usb-to-microusb cables for like a buck online - places like monoprice or many others.
If you REALLY did try new USB cables, make sure the USB ports are clean - both on the phone and on the computer you're trying to hook to.
Thanks for your responses.
I found the solution to my problem. I decided to start from scratch. I deleted the drivers, AIO and Heimdall. Then I plugged in the phone just to see if Windows 7 sees it as an unknown device still. It was recognized but it was asking for drivers this time. So I proceeded to install JUST the driver and magically everything was working NORMAL again!!
Im not sure what may have caused this to happen. I flash my phone every other week so I found it kind of odd when this did occur.
Oh well.. ITS FIXED!! AND I CAN FLASH AGAIN!!
Sent from my SGH-T959 using XDA App
odin doesnt detect my phone
I dont know what to do! Odin doesn't detect my phone. i have tried different usb cable , different computer. no matter what i did odin doesnt recognize my phone in download mode. what should i do? Please somebody help. What driver should i install?
I have been posting (and have had some nice people try to help) in the How to Recover Fascinate from any Brick thread for about a week and can't seem to find a solution. I have also searched the internet high and low looking for a solution with no success. Hopefully someone here has had the same issues and can point me in the right direction.
I rooted the Fascinate using a one click method and was able to get a Titanium backup but could not get into the proper recovery to do a system image. Stupidly, I flashed SP Recovery from within ROM Manager. From that moment on I when the phone is turned on it gets to the "Samsung" screen and locks.
I did my research and found out all I needed to do to fix is install ODIN and reflash the stock ROM again. The problem is that ODIN will not recognize the phone. I start ODIN, pull the phone battery, plug the phone into USB cable, push volume down to get the phone into download mode (Yellow Triangle). I keep getting USB Device Not Recognized errors from Win 7 (64-bit).
I tried installing Heimdall to load the correct drivers but it doesn't see the device either. I can connect my Droid or Droid 2 and Heimdall sees immediately so I know it is not a problem with the software or cable.
I have tried to install the correct USB drivers (even the ones listed on this site). I tried installing Kies and it doesn't see the phone either.
Since the phone is looping at the "Samsung" screen I can't change any settings in the phone as some have suggested. I really do not have any more ideas other that to use this phone as a very expensive door stop. Hopefully, someone here can help. Thanks in advance!!!
pscpa said:
I have been posting (and have had some nice people try to help) in the How to Recover Fascinate from any Brick thread for about a week and can't seem to find a solution. I have also searched the internet high and low looking for a solution with no success. Hopefully someone here has had the same issues and can point me in the right direction.
I rooted the Fascinate using a one click method and was able to get a Titanium backup but could not get into the proper recovery to do a system image. Stupidly, I flashed SP Recovery from within ROM Manager. From that moment on I when the phone is turned on it gets to the "Samsung" screen and locks.
I did my research and found out all I needed to do to fix is install ODIN and reflash the stock ROM again. The problem is that ODIN will not recognize the phone. I start ODIN, pull the phone battery, plug the phone into USB cable, push volume down to get the phone into download mode (Yellow Triangle). I keep getting USB Device Not Recognized errors from Win 7 (64-bit).
I tried installing Heimdall to load the correct drivers but it doesn't see the device either. I can connect my Droid or Droid 2 and Heimdall sees immediately so I know it is not a problem with the software or cable.
I have tried to install the correct USB drivers (even the ones listed on this site). I tried installing Kies and it doesn't see the phone either.
Since the phone is looping at the "Samsung" screen I can't change any settings in the phone as some have suggested. I really do not have any more ideas other that to use this phone as a very expensive door stop. Hopefully, someone here can help. Thanks in advance!!!
Click to expand...
Click to collapse
Control Panel/ User Account/ User Account Control settings- set to- Never notify- restart computer.
Should recognize phone. Reset to default when done and restart. Windows crap!
Thanks but this setting has always been set to "Never Notify"......any other ideas...please
I don't know nothing about it but the guy said " reset to default and restart (again)??
Sent from my SCH-I500 using xda premium
Followed the directions exactly. I think the OP wanted me to reset to default after I was done flashing. This is so strange....I figure if the people on XDA can't figure this out the phone is doomed.
Have you tried a different USB plug on the computer? Or a different USB cord? Or a different computer?
Sent from my SCH-I500 using XDA App
schu9120 said:
Have you tried a different USB plug on the computer? Or a different USB cord? Or a different computer?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I had to use a laptop to access my Fascinate because my desktop wouldnt even show it as unrecognized hardware, it was like it didnt even exist... I went in device manager and uninstalled all my usb devices, rebooted with everything but mouse/kb unplugged, installed SDK drivers for Nexus S, rebooted again (probably not needed but better safe than sorry) and I can now Odin into my phone... Hope this helps ya man... sucks bricking a phone
The Heimdall drivers won't work. Kies won't recognize it if it won't boot. There should be an option in Kies to install the driver. Drop down box in the top left corner. Did you try to install your driver that way?
have you installed the driver yet? samsung driver?
ok guys, first things first. YES i did search, i read threads for hours. So if your just gonna come to bash on me... get off it.
So i had a bad flash, oh no. Phone was stuck in a bootloop, got it to download mode and put it thru odin. Well odin said FAILED. now i can still get into DL mode but its no longer a bootloop, now its a lil picture of a phone linked to a computer when i turn it on.
SO heres the prob, i can get into DL mode, but odin refuses to recognize my phone. Ive tried other usb ports, other cords, unistalled and reinstalled odin and the drivers. USB debugging is off says aio toolbox. So what do i do now? any suggestions im not thinking of?
Any help is greatly appreciated and will b thanked. =)
Phone to PC screen still should be able to flash through.
Have you tried a different computer? One that your phone has never been in contact with?
What was the FAILED error when you tried to ODIN initially?
Can you get into recovery by chance?
i have tried a different computer, but not one it has never been on b4.
And toast, i actually dont know if i can get into recovery. Im about to look up how and try that
WhiteBoyAwesome said:
i have tried a different computer, but not one it has never been on b4.
And toast, i actually dont know if i can get into recovery. Im about to look up how and try that
Click to expand...
Click to collapse
Gingerbread bootloader uses this combo:
For Recovery - Lower Volume Key + Power Button
For Download - Upper Volume Key + Power Button
If you have Froyo bootloader:
For Recovery - Both Volume Keys + Power Button
For Download - Both Volume Keys and Connect USB Cable
alright, i can use the hardware buttons to get into download just fine. But when i try to get into recovery it only gives me the Phone -- ! -- Computer icon. ITs getting annoying lol
Ok. I didn't figure that would work, but it wasn't going to hurt anything to try do you have any friends with Macs? You could try it on one of them with Heimdall. That would be another option to try.
Also, check out this thread: http://forum.xda-developers.com/showthread.php?p=8149503
Read all the posts, there is some good stuff in there.
+1 on recommended thread. It sounds just like your issue. Definitely try the Heimdall AIO one click t959 for Windows.
sent from the depths of helly bean
nothin yet :/
Google eugenes froyo that does not brick, read the op carefully, because after you odin the tar file, you will have an error message, thats ok, odin eclair and you should pass.
Read it 10 times, you'll reboot in cwm with an error message, ok, reboot, download, eclair.
stupid question sorry, but do you have sdk platform tools installed?
im not sure. i downloaded something called sdk manager, but it closes the moment u open it.
SDK platform tools is a large program, But if your computer has recognized your phone up till now, you probly have the right drivers, by the way have you cleaned your usb port? toothbrush and an electronics cleaner or alcohol very lightly, never know.
ok guys. heres the update. I tried all the links you guys have kindly tossed my way. nothin. Im on a different computer even and downloaded the drivers, odin, toolbox, etc. The phone still isnt recognized. I Have no clue why, is the reason cause usb debugging is off? the only 2 screens i can get to r download and phone ! computer. Am i bricked for good??? =(
WhiteBoyAwesome said:
ok guys. heres the update. I tried all the links you guys have kindly tossed my way. nothin. Im on a different computer even and downloaded the drivers, odin, toolbox, etc. The phone still isnt recognized. I Have no clue why, is the reason cause usb debugging is off? the only 2 screens i can get to r download and phone ! computer. Am i bricked for good??? =(
Click to expand...
Click to collapse
You are putting your phone into download mode before using odin right? You must have your phone in download mode for odin to recognize it. I'm guessing you have done this but I wasn't sure after reading through this thread, hope you get up and running again.
Sent from my SGH-T959 using Tapatalk 2
iTz KeeFy said:
You are putting your phone into download mode before using odin right? You must have your phone in download mode for odin to recognize it. I'm guessing you have done this but I wasn't sure after reading through this thread, hope you get up and running again.
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
yep. tried multiple combos as well
Hey I think you should follow this..
1. Connect your phone with computer without battery
2. Press volume down and power button simantaniously for getting download mod
3. After 30 or 60 second pull back battery into phon with holding buttons
4. Odin ditect your device almost surely...
Thanks..
Sent from my GT-I5510 using xda premium
Ok, I just went through this over the past weekend with a spare Vibe that I have. Odin would not recognize it at all for my. I would here the Ding and then nothing. No yellow COM box, no driver installation, nothing.
Here is what I did:
First I went into Device Manager and with the phone plugged in (needs to be plugged in so you can see the yellow!), I uninstalled everything with Samsung's name tagged to it (including my SGS3 and SGS2 drivers).
Then I went here and downloaded and installed Heimdall (take note that you have to make sure that libusb-1.0 is correctly installed). There is an exe file in there (might be in the Heimdall thread here in the Vibe section), that allows you to update the drivers. That is where you would replace the Windows with libusb-1.0.
Then I plugged in my USB to PC and to phone and put it in Download mode. Nothing. So I left it plugged into the phone still but unplugged from PC and move ports. I have 3 ports and believe it or not, the one farthest from the power source/MB was the one that work. As soon as I plugged it in, I heard the Ding and saw the box pull up auto-installing the drivers.
After that, I went to Utilities in Heimdall to make sure detected. It was and I flashed Mr_Psycho's package (no pun intended ) via the normal Heimdall instructions.
Believe me, I have spent a ton of time on this and troubleshooted everything from dead USB to dead motherboard. It was a real PITA.
Edit:: If you need any of the files, Heimdall version or Drivers, just PM me and I will send them to you. You are not Bricked, just your PC's vision is clouded a bit.
woodrube i greatly appreciate the mass amount of help. i will try all the above as soon as im home and report back to u
alright, i deleted everything, reinstalled, tried heimdall still nothing. I am in download mode but laptop wont recognize anything. it says the correct drivers are installed but then says usb device not recognized, this is killing me as i need my phone imma post a video tonight of what im doing, hopefully someone sees im doing something wrong