i downloaded S5830JPKC2 from samfirmware but i found 1 file only called S5830DXKC1-S5830DXKC1-S5830OLBKC1_HOME.tar
any help????
soudy1994 said:
i downloaded S5830JPKC2 from samfirmware but i found 1 file only called S5830DXKC1-S5830DXKC1-S5830OLBKC1_HOME.tar
Click to expand...
Click to collapse
In there is TAR file in side. If you open it with WINRAR(you first package what you downloade), then click to the TAR file two times, it ask you PASSSWORD(in samfirmware, where you downloaded it).
PHP:
## Password is samfirmware.com
# Password is samsung-firmwares.com
You must install it with ODIN like ONE PACKAGE. Check the ONE PACKAGE box and use in ONE PACKAGE button this .TAR file what you extracted from that(S5830JPKC2_OJPKC1_JXKC1) ZIP file!
CHEERS!
casiocas said:
In there is TAR file in side. If you open it with WINRAR(you first package what you downloade), then click to the TAR file two times, it ask you PASSSWORD(in samfirmware, where you downloaded it).
PHP:
## Password is samfirmware.com
# Password is samsung-firmwares.com
You must install it with ODIN like ONE PACKAGE. Check the ONE PACKAGE box and use in ONE PACKAGE button this .TAR file what you extracted from that(S5830JPKC2_OJPKC1_JXKC1) ZIP file!
CHEERS!
Click to expand...
Click to collapse
thanks mate <3
Related
I'm new to rooting,
Android Version= 2.3.3
Baseband Version= I9100NEKF2
Kernel version= 2.6.35.7-I9100XWKF4-CL280512
Build Number= GINGERBREAD.XWKF4
Firstly am i looking for KF2 or KF4?
I downloaded the zip file for KF2 from chainfire afew posts down where he writes "yet more downloads" but i get a zImage file being extracted instead of the .tar file i expected.
what am I doing wrong? where is the right root kernel for me? I want to use Chainfire's as he provides everything in one.
Thanks.
You need to know your PDA version, not baseband. *#1234# in keypad and see it. Then download the same XXX.zip from CF thread. If you download that .zip file then you will get .tar after extraction, then to get the zImage you have to extract that .tar file again.
Regards.
ithehappy said:
You need to know your PDA version, not baseband. *#1234# in keypad and see it. Then download the same XXX.zip from CF thread. If you download that .zip file then you will get .tar after extraction, then to get the zImage you have to extract that .tar file again.
Regards.
Click to expand...
Click to collapse
Thnks, my PDA is XWKF4 so I just downloaded CF-Root-SGS2_ZS_OZS_KF4-v4.0-CWM4. The same thing happens when I extract though. the zImage is for when you already have root to flash from SDcard isnt it? I havent got root.
Smousers said:
Thnks, my PDA is XWKF4 so I just downloaded CF-Root-SGS2_ZS_OZS_KF4-v4.0-CWM4. The same thing happens when I extract though. the zImage is for when you already have root to flash from SDcard isnt it? I havent got root.
Click to expand...
Click to collapse
That's the right file you downloaded. I just checked for you again, and I do get .tar file if I extract that downloaded zip with 7Zip/WinRar. Don't know why aren't you getting it!!!
ithehappy said:
That's the right file you downloaded. I just checked for you again, and I do get .tar file if I extract that downloaded zip with 7Zip/WinRar. Don;t know why aren't you getting it!!!
Click to expand...
Click to collapse
I just tried it with 7zip aswell. I dont understand this
Is there anything else you can recommend?
Cheers
Are you downloading a kernel instead of the cwm and root file .
As said 6mb file zipped unzip that file open the folder and inside is a tar file . Flash the tar file do not open it .
You are opening the tar file is your problem .
jje
What's the size of the zip you downloaded, is it ~6 MB?
Make sure you are downloading this one,
http://forum.xda-developers.com/attachment.php?attachmentid=630778&d=1308560606
Thanks guys. Got Root now, what do i do with the superuser/CWM apps, also installed ROm manager and titanium backup but dont want to mess about before i know exactly what im doing.
I know i want to freeze/remove all the bull**** i dont need, what else can i do with root now and how?
Hi,
I downloaded a ROM from sammobile.com for my galaxy tab 10.1, and all I want is system.img which is located in a tar.md5 file .
if I extract is with 7zip I get a message "there is no correct record at the end of archive"
and dsixda kitchen don't seem to recognize it .
any ideas please .
thanks.
Well its simple just rename it to .tar and use winrar to extract it. the md5 extension makes odin calculate a hash to check if the firmware you're flashing is not corrupted.
hi,
I did that and I got a message "there is no correct record at the end of archive"
the files are extracted but I think it is corrupted because dsixda kitchen can't read it.
just extract it by 7-Zip and don't care about message
I have this problem too, my 7-zpi say that can´t open file format unknowed or damage.
your download maybe interupted, try download it again and do md5 checksum
Ace Duos Kernel
how to get s6802 custom kernel??
jeckyvanz said:
how to get s6802 custom kernel??
Click to expand...
Click to collapse
You can find a beta release custom kernel for the Samsung Galaxy Ace Duos from here.
kernel
thanks. but the download link doesnt work again.
MD5
I've problem with restoring through CWM.
it said "md5 sums mismatch. how to troble it?
logic5 said:
Hi,
I downloaded a ROM from sammobile.com for my galaxy tab 10.1, and all I want is system.img which is located in a tar.md5 file .
if I extract is with 7zip I get a message "there is no correct record at the end of archive"
and dsixda kitchen don't seem to recognize it .
any ideas please .
thanks.
Click to expand...
Click to collapse
You might be opening the wrong file.
You have to download 2 files:
xxxx.tar
xxxx.tar.md5
the first one is the one you have to open.
the second one is the one that only have the MD5 result of the first.
( http://en.wikipedia.org/wiki/MD5 )
jeckyvanz said:
I've problem with restoring through CWM.
it said "md5 sums mismatch. how to troble it?
Click to expand...
Click to collapse
Redownlaod and try to unzip again. Kitchen should open it, make sure u have kitchen scripts for your phone or edit from flashable zip. Afaik
best idea
dont use 7zip but use unoversal extractor. it will extract everything.
I have the same issue for 5301. I have to get either the recovery or system img for creating a custom rom. Usually samsung firmware files can be extracted using izarc, 7zip or universal extract tool. some can be opened with ultraISO or similar tool. I tried dsixdas kitchen as well. That does not even acknowledge this ROM. These firmwares come as a single tar file with md5 sum attached. There is something different about this ROM file that wont even let let the regular tools see what is inside the file. I tried to open it with a hex editor and it looks similar what a regular tar.md5 file would look. Looking at the log file from universal extractor:
TrID/32 - File Identifier v2.02 - (C) 2003-06 By M.Pontello
Definitions found: 2641
Analyzing...
Collecting data from file: C:\Technical\S5301XXALJ7_S5301OXXALJ8_S5301XXLJ7_HOME.tar.md5
99.3% (.TAR) TAR archive (149/5)
0.6% (.LZMA) LZMA compressed file (1/1)
7-Zip Tar archive extractions cannot be logged.
If Odin can flash these files using the same boot, recovery and system... images then there must be a way to extract these img files. wonder if odin extracts to a temp location?
Here is a link to the file http://hotfile.com/dl/198648982/cfb...5301_EUR_1_20130214151121_61bveu8l1b.zip.html
logic5 said:
Hi,
I downloaded a ROM from sammobile.com for my galaxy tab 10.1, and all I want is system.img which is located in a tar.md5 file .
if I extract is with 7zip I get a message "there is no correct record at the end of archive"
and dsixda kitchen don't seem to recognize it .
any ideas please .
thanks.
Click to expand...
Click to collapse
Use odinatrix to extrat system.img n modem files..
Its the easiest tool do so...
U may also use splitfus2 bt its way trickier to use than odinatrix.
masum73 said:
I have the same issue for 5301. I have to get either the recovery or system img for creating a custom rom. Usually samsung firmware files can be extracted using izarc, 7zip or universal extract tool. some can be opened with ultraISO or similar tool. I tried dsixdas kitchen as well. That does not even acknowledge this ROM. These firmwares come as a single tar file with md5 sum attached. There is something different about this ROM file that wont even let let the regular tools see what is inside the file. I tried to open it with a hex editor and it looks similar what a regular tar.md5 file would look. Looking at the log file from universal extractor:
TrID/32 - File Identifier v2.02 - (C) 2003-06 By M.Pontello
Definitions found: 2641
Analyzing...
Collecting data from file: C:\Technical\S5301XXALJ7_S5301OXXALJ8_S5301XXLJ7_HOME.tar.md5
99.3% (.TAR) TAR archive (149/5)
0.6% (.LZMA) LZMA compressed file (1/1)
7-Zip Tar archive extractions cannot be logged.
If Odin can flash these files using the same boot, recovery and system... images then there must be a way to extract these img files. wonder if odin extracts to a temp location?
Here is a link to the file http://hotfile.com/dl/198648982/cfb...5301_EUR_1_20130214151121_61bveu8l1b.zip.html
Click to expand...
Click to collapse
Don't be lazy.
Lift your hand n press the Thanxxx Button.=)
---------- Post added at 10:02 AM ---------- Previous post was at 10:00 AM ----------
frankito777 said:
You might be opening the wrong file.
You have to download 2 files:
xxxx.tar
xxxx.tar.md5
the first one is the one you have to open.
the second one is the one that only have the MD5 result of the first.
( http://en.wikipedia.org/wiki/MD5 )
Click to expand...
Click to collapse
Now there is only one xxx_home.tar.md5 file..
That was old days.
Be a part of new world.
N now u cnt extract through an archve manager.
U need espicial tools like splitfus2 n odinatrix to extract files.
Don't be lazy.
Lift your hand n press the Thanxxx Button.=)
Thanks SArnab! so finally I am able to split the files using odinatrix. Now for this type of turbo ROMs how do I create odin flashable file???
I created a regular odin tar file with md5 sum but that does not go past 'NAND Write Start'. Please advise.
masum73 said:
Thanks SArnab! so finally I am able to split the files using odinatrix. Now for this type of turbo ROMs how do I create odin flashable file???
I created a regular odin tar file with md5 sum but that does not go past 'NAND Write Start'. Please advise.
Click to expand...
Click to collapse
Your pc shud b superfast so that odintrix can work witout lag.
My HP G6 lapi took around 10 mins to extrqct the one .tar.md5 file..
The tool will automatically extract diffrnt .tar files such as modem_xxx.tar pda_xxx.tar n csc_xxx.tar
Now u can use these to flash through odin witout any prb.
U can use pda.tar in kitchen to get boot.img n system.img.
Kitchen will also help u extract sysmtem foldr from system.img.
U can also flash through odin the single .tar.md5....
Choose that in pda field...
Odin is smart enough to do rest of the part.
Don't be lazy.
Lift your hand n press the Thanxxx Button.=)
Appreciate the quick response. I guess my question was not clear enough. I extracted the recovery and created a clockwork recovery named recovery.img. Now I want to flash this recovery back on the device. I created the tar file using:
tar -H ustar -c recovery.img > CWMrecovery.tar
md5sum -t CWMrecovery.tar >> CWMrecovery.tar
mv CWMrecovery.tar CWMrecovery.tar.md5
When I flash this using odin3_v3.07 md5 is verified but he flash does not go through and stops at NAND write start. Is there a special way to create a odin flashable tar.md5 file foe these turbo firmwares?
masum73 said:
Appreciate the quick response. I guess my question was not clear enough. I extracted the recovery and created a clockwork recovery named recovery.img. Now I want to flash this recovery back on the device. I created the tar file using:
tar -H ustar -c recovery.img > CWMrecovery.tar
md5sum -t CWMrecovery.tar >> CWMrecovery.tar
mv CWMrecovery.tar CWMrecovery.tar.md5
When I flash this using odin3_v3.07 md5 is verified but he flash does not go through and stops at NAND write start. Is there a special way to create a odin flashable tar.md5 file foe these turbo firmwares?
Click to expand...
Click to collapse
Sorry, I have no idea bout wat u r talkin.
I never did this so cant help u in tis part.
Oh ya where did u put the tar file in odin??
In pda fieled or csc or modem??
I think its need to be in pda field.
I cnt help more on this.
But ya I wnt leave it here.
A user named Deadly can help u.
He is great in converting odin to cwm n cwm to odin.
Hope u understan wat I mean.
Don't be lazy.
Lift your hand n press the Thanxxx Button.=)
System App
how to install custom system ui/android status bar on system. my device gt-s6802. what's compatible with mine??
I just flashed UHLB2 from Intratech's thread.
My phone downloaded the file fine, and Odin had a green 'PASS!' in the top left corner. I think it installed OK as well as I saw the word 'Sucessfully (something)' just before it rebooted.
But now trying to turn it on, the phone is in a perpetual state of starting up. It just replays the starting animation over and over again.
What is wrong?
Also, I noticed the file I downloaded was ~286MB, as opposed to ~333MB in the file from sammobile. Intratech's file was .7zip, and sammobile's was just .zip.
aaronsclee said:
I just flashed UHLB2 from Intratech's thread.
My phone downloaded the file fine, and Odin had a green 'PASS!' in the top left corner. I think it installed OK as well as I saw the word 'Sucessfully (something)' just before it rebooted.
But now trying to turn it on, the phone is in a perpetual state of starting up. It just replays the starting animation over and over again.
What is wrong?
Also, I noticed the file I downloaded was ~286MB, as opposed to ~333MB in the file from sammobile. Intratech's file was .7zip, and sammobile's was just .zip.
Click to expand...
Click to collapse
I'm just speculating... I don't think 7zip files are compatible with Odin. That's probably your problem. The 7zip file from Intratech will contain compatible zip files. You can extract it using the program 7zip(freeware) which I'd highly recommend for general use anyway.
ibm9001 said:
I'm just speculating... I don't think 7zip files are compatible with Odin. That's probably your problem. The 7zip file from Intratech will contain compatible zip files. You can extract it using the program 7zip(freeware) which I'd highly recommend for general use anyway.
Click to expand...
Click to collapse
Yeah I do unzip the files with 7zip, after which it is a .md5 file.
And I've flashed many times before using that method so I don't think it's that. Thanks anyway.
.7zip file is not supported by Odin.
You need to extract that .7zip file, you will get .zip file that supported by Odin.
I think the downloaded file you used is incomplete. Most of the file sizes downloaded are around 350MB or higher. Recommend you re-download the file again or even an older release and re-flash the phone.
aaronsclee said:
Yeah I do unzip the files with 7zip, after which it is a .md5 file.
And I've flashed many times before using that method so I don't think it's that. Thanks anyway.
Click to expand...
Click to collapse
Just rename .md5 to .zip file.
JasMiL said:
Just rename .md5 to .zip file.
Click to expand...
Click to collapse
No. Odin can flash .md5 so you should leave it. md5 files actually help because Odin can check the md5 hash and stop if the file is corrupt/incomplete.
But you have to extract it from 7z because it can't flash that.
Sounds like you've got an incomplete file if the file size is less than what you'd expect. Re-download and try flash again.
Also, to those saying extract the 7zip file; I'm pretty sure OP said he had done that before flashing and had used the .md5 file. Unless I'm reading his posts wrong, in which case, yes unzip the 7zip file and flash the .md5.
BJ van Beethoven said:
Sounds like you've got an incomplete file if the file size is less than what you'd expect. Re-download and try flash again.
Click to expand...
Click to collapse
Hm..
I've downloaded and flashed again, but I have the same problem. The new file was bigger than the original one, so the original was probably incomplete. But the file has been at about 274MB for about 6 hours now on Intratech's post. I guess I'll just have to stick to LA4 for now then.
Hey everyone
I have a question which I coudn't find anywhere on the forum for an answer...
I have a firmware for my galaxy ace named S5830XWKTM_S5830OXXKT3_S5830XWKT7_HOME.tar.md5
and I wanted to edit the baseband so I could make it work in my S5830L by just changing "amss" file...
But I can't change it if they are in .md5 and if I change the file to .zip and transfer amss, I can't change it back to .md5
How can I turn S5830XWKTM_S5830OXXKT3_S5830XWKT7_HOME.tar.zip into S5830XWKTM_S5830OXXKT3_S5830XWKT7_HOME.tar.md5
I don't know if you understand my question...
so here is what i understood you want to extract the. tar file change a file and repack it right. ... how different is the l version different from the Normal one
speed_bot said:
so here is what i understood you want to extract the. tar file change a file and repack it right. ... how different is the l version different from the Normal one
Click to expand...
Click to collapse
yes
The only difference is the frequency for 3G
S5830 uses for HSDPA 900 /2100
and S5830L 850 / 1900
By deafult odin has checksum md5 verification thats why there is a .md5 extension even if you manage to repack it the file wont get flashed through odin......
i have a workaround for you
flash the file directly there is a tutorial to extract and flash only baseband use that after flashing that zip .......
speed_bot said:
By deafult odin has checksum md5 verification thats why there is a .md5 extension even if you manage to repack it the file wont get flashed through odin......
i have a workaround for you
flash the file directly there is a tutorial to extract and flash only baseband use that after flashing that zip .......
Click to expand...
Click to collapse
I think I found it
I just created my .tar file to flash it through Odin.
But I have a question
Can I create a .tar file with the complete firmware and flash it through Odin?
followed this guide http://forum.xda-developers.com/showthread.php?t=1558715
I just added everything that was in the .md5 , replaced baseband file and put it back again in a .tar file
you can but need the change the checksum to the new value its better if you flash it seperately
speed_bot said:
you can but need the change the checksum to the new value its better if you flash it seperately
Click to expand...
Click to collapse
Oh, but what do you mean with changing the checksum
the checksum is only to check if the file is corrupt or not or if it has been modified...
well checksum adds up all the files finds it's size and store's it when yoy change a file they may be of different: sizes so the checksum verification fails
speed_bot said:
well checksum adds up all the files finds it's size and store's it when yoy change a file they may be of different: sizes so the checksum verification fails
Click to expand...
Click to collapse
Its not like im using the same .md5 file.
All I did was extract all the files from the .md5
Repacked them into a .tar file and it should be flashable through Odin...
Since its not .md5 it won't do a checksum
I added the .tar file into Odin - "One Package" and doesn't give me any error or anything... So I guess it should work the same as changing baseband does.
EDIT:
Thanks alot for your help
I managed to repack all the files to make a firmware flashable through Odin
All I did was this
$ tar -H ustar -c (all unpacked files in here) > firmware.tar
$ md5sum -t firmware.tar >> firmware.tar
$ mv firmware.tar firmware.tar.md5
I just flashed it through Odin and no problems at all
i thought that you were using the base ace rom by changing the file so said that checksum would vary btw your problem is solved right edit the title thread to solved it will say others time.....
Hello,
Sorry for a noob question, I tried to search for solution, but couldn'f find anything.
I downloaded last update from sammobile.com, and would like to update my phone, but downloaded zip file does not contains md5 or tar, but folders like META-inf, patch, preload, recovery system and sboot.bin file.
Could you please advice me how to update this firmware to my phone?
Tonza said:
Hello,
Sorry for a noob question, I tried to search for solution, but couldn'f find anything.
I downloaded last update from sammobile.com, and would like to update my phone, but downloaded zip file does not contains md5 or tar, but folders like META-inf, patch, preload, recovery system and sboot.bin file.
Could you please advice me how to update this firmware to my phone?
Click to expand...
Click to collapse
You have unzipped the tar file it wont work unzipped .
jje
JJEgan said:
You have unzipped the tar file it wont work unzipped .
jje
Click to expand...
Click to collapse
i didn't unzp anything. I said that zip file that I downloaded from sammobile web site does not contain tar or MD5 file, but the folder structure.
No idea then what you actually downloaded .
Requirement is a tar file not a zip.
Try the sammobile forum for answers .
Or use CHECKFUS
jje