Curious as to what are your undervoltage settings.
I'm running cm7, Neo 6 kernel.
10000 -75
8000 - 75
4000 - 125
2000 - 150
1000 - 150
Sent from My CM7 Monster
Related
Can anyone post their Voltage settings for Nemesis2all OTB OC kernal? Like posting ALL of them? Thankss.
You could skim through the thread starting at page 20 or so and look for lists of voltages and/or thumbnails.
I've been using this kernel recently. Here's my settings so far, although the overclocked settings have only been in place for a few hours, and I'm cautious about overvolting right now (this is my second fascinate ).
For reference, I had used comavolt before with no issues, but apparently barely (these settings aren't much of an improvement, other than overclocking of course).
I/O scheduler is set to cfq (sio gave me lockups in the market with comavolt settings). Enabled steps are 200, 400, 800, 1000, 1120, and 1200 MHz. I'm not bothering with 600 or 900 steps as I couldn't get any better voltage than with the 800 and 1000 steps. 1300 (and maybe even 1400) should be doable with overvolting, but doesn't stand a chance without it.
100-200 MHz: 850 mV
400 MHz: 975 mV
600-800 MHz: 1125 mV
900-1000 MHz: 1225 mV
1120 MHz: 1275 mV
1200 MHz: 1300 mV
I'm using the following 4 steps. You can swap in the last step for a 1500/~1400mV but I personally have yet to get that 1500 stable. At 1.4ghz I'm seeing 2000 in Quadrant, 20 mflops in Linpack. I'm also getting insanely efficient battery usage. Thank you Nemesis.
200 - 875mV
600 - 1150mV
1000 - 1250mV
1400 - 1350mV
*CFQ scheduler has kept 1400 crash free.
Love the evil fascinate! I am trying to optimize the voltage settings using the Voltage control. I am not sure what to do. I want to optimize battery life mostly. I have it set on base setting for bfq at the moment. Do these need to be tweaked. FYI I have SetCpu set to reduce my clock speed as the battery % drops as follows
Battery < 20% 200 max 100 min
Battery < 40% 400 max 200 min
Battery < 60% 600 max 200 min
Battery < 80% 800 max 200 min
Battery < 99% 1000 max 200 min
I corrected this post title a few times cause I kept putting in wrong information. Sorry
Does anyone have any oc/uv suggestions for us newbies who keep getting freezes? I could use the advice myself?
iwasblown said:
Does anyone have any oc/uv suggestions for us newbies who keep getting freezes? I could use the advice myself?
Click to expand...
Click to collapse
well, like always every phone is different....do you try to go too low or too high when your phone freezes?
my phone doesnt handle OC very well at all, which is fine cuz id rather preserve my battery over performance anyways.
my uv settings are as follows:
100 mhz: -100 = 850mv
200 mhz: -75 = 875mv
400 mhz: -75 = 975mv
800 mhz: -50 = 1150mv
1000mhz: -25 = 1225mv
the rest ive left alone. i think its a pretty standard uv setting. i prob could go a little lower but havent messed with it for a while.
with this setting i can get up to 30 hours on my phone...but thats also during work while i dont barley use my phone
These settings worked pretty good, the only thing my phone couldn't do wa 850 on the 100mhz setting, i had to dtoo it to 900, and now my phone is conservatively running off of a battery. Great job bro thx
Sent from my SGH-T959 using XDA Premium App
what are good setcpu settings? currently i have my main profile at 200-1000 ondemand, and i have 2 profiles: 200-200 conservative screen off, and 200-200 conservative temp>50c
as for the voltages i followed this
1600 MHz - 1425 mV
1400 MHz - 1250 mV
1200 MHz - 1150 mV
1000 MHz - 1050 mV
800 MHz - 950 mV
500 MHz - 850 mV
200 MHz - 800 mV
is there anything i should change for my profiles etc? my aim is to have the battery last as long as possible.
Not another thread for the same thing,
http://forum.xda-developers.com/showthread.php?t=1158102
Regards.
seems like you got a good CPU, cause mine cannot even set 200MHz voltage to 825mV
Kernel: Siyah Kernel v6 beta 4
Rom: Omega Rom v18
Highest Quadrant score: 5177 (Omega Rom v16.2)
Power Saving:
300 MHz - 400 MHz (both 925 mV)
powersave
Normal Use:
300 MHz - 1400 MHz (default voltages)
ondemand
Benchmarking:
1500 MHz (default voltage) - 1600 MHz (1600 mV or it your phone will crash)
lulzactiveq
WARNING:
Setting 1500 MHz to 1600 MHz may cause your phone to crash.
Do not tick "set on boot" option just to be safe.
You have been warned.
I think we can post our own values of that kernel values, for finding a good measure for the best stability and less battery drain.
I think it's better to post only UV on stock frequencies; for making easier the comparison.
"Stable" means you have no reboots ever, you have to try for a long time and making an intense use of your CPU (there's an app called Stability Test, running it for 30 min is a very good measure of stability I think)
So, mine are:
300 - 830
600 - 900
800 - 1000
1000 - 1150
1200 - 1250
Mine are currently:
300 - 830
600 - 950
800 - 1050
1000 - 1100
1200 - 1200