Hello everybody
when i try to flash the zip file via Xrec 1.0.0 ist says:
Amend scripting (update-script) is no longer supported.
Please switch to Edify scripting to create working update zip packages.
Installing aborted.
Any ideas how to solve that?
Thanks in advance!
Razorblade81 said:
Hello everybody
when i try to flash the zip file via Xrec 1.0.0 ist says:
Amend scripting (update-script) is no longer supported.
Please switch to Edify scripting to create working update zip packages.
Installing aborted.
Any ideas how to solve that?
Thanks in advance!
Click to expand...
Click to collapse
Roll back to Xrecovery 0.3 with flashtool.
Thanks mate ;-)
I solved it few minutes ago..
Sadly ich wiped everything before i tried ti install via Xrec 1.0.0
After that i reinstall Stock firmware via SEUS an install the old Xrec via Flashtool
Related
When i do the update it goes and fails and gives me this message.
"
installing update...
Amend scripting (update-script) is no longer supported.
Amend scripting was deprecated by google in Andriod 1.5.
It was necessary to remove it when upgrading to the clockwork mod 3.0 gingerbread based recovery. Please switch to Edify scripting (updater-script and update-binary) to create working update zip packages.
Installation aborted.
"
What do i do? help me out here peoplez.
ydmitriv said:
When i do the update it goes and fails and gives me this message.
"
installing update...
Amend scripting (update-script) is no longer supported.
Amend scripting was deprecated by google in Andriod 1.5.
It was necessary to remove it when upgrading to the clockwork mod 3.0 gingerbread based recovery. Please switch to Edify scripting (updater-script and update-binary) to create working update zip packages.
Installation aborted.
"
What do i do? help me out here peoplez.
Click to expand...
Click to collapse
well first of all nero 3 is old, secondly your running clockwork 3.0 for some reason so flash some stock kernel and that should give you a recovery that you can use to flash nero 3 or any rom
Hey there fellow XDA'ers im looking to change my current ROM but due to being stuck on the FXP50 kernel (broken usb) im not sure what i can run? im stuck with CWM5 and most of my previous ROMs will not install via CWM5 i get a error as follows when i try to install my previous RevolutionHD ROM
Finding update package...
Opening update package...
Installing update...
Amend scripting (update-script) is no longer supported.
Amend scripting was deprecated by Google and Android 1.5.
It was necessary to remove it when upgrading to the ClockworkMod 3.0 Gingerbread based recovery.
Please switch to Edify scripting (updater-script and update binary) to create working update zip packages
Installation aborted.
can anyone give me a reason for this error/a method to install xRecovery alongside CWM5 on the FXP50 kernel or a ROM that will run on an unlocked bootloader, FXP50 kernel and will install via CWM5, all help will be appreciated, thanks in advance
You can install xrecovery by placing the appropriate files in system folders. There are download links and instructions in the xrecovery thread in the Dev section.
Sent from my Inspire 4G using XDA App
thanks for your reply, still having problems getting it to work tho, i install all files into correct folders and when im pushing the back button it still goes into CWM5 volume down does the same
You also fix permissions?
Sent from my Inspire 4G using XDA App
Guys can anyone help me?
Im gonna install ROM T.E.A.M from my stock ROM. . but after i pressed it use CWM v5, many word show like this
--Installing: /sdcard/TEAM_ROM_v3.8.zip
Finding update package. .
Opening update package. .
Installing update. .
Amend scripting (update-script) is no longer supported
Amend scripting was deprecated by Google in Android 1.5.
It was neccessary to remobe it when upgrading to the ClockWorkMod 3.0 Gingerbread based recovery,
Please switch to Edify scripting (updater-script and update-binary) to create working update zip package.
Installation aborted.
and
i was trying to install xRecovery-0.3_GBready.zip on CWM v5. . and show word like that again
I think the problem is "script" but how to resolve it?
Sorry mystery has been resolved by mine
##Thread Closed##
How?
how? I have the same problem :/
hello,
i have doomkernel V6, and stock 2.3.3, while i am trying to install custom ROM ( ZIP) i got the follow:
Signature verification faild
installation aborted.
Please help
hafezs said:
hello,
i have doomkernel V6, and stock 2.3.3, while i trying to install custom ROM ( ZIP) i got the follow:
Signature verification faild
installation aborted.
Please help
Click to expand...
Click to collapse
which rom you are trying to flash?
techdevilisnowmonster said:
which rom you are trying to flash?
Click to expand...
Click to collapse
this ROM:
http://forum.xda-developers.com/showthread.php?t=1661242
but i think the problem is not in the ROM,
here i am writting what i got:
installing: /sdcard/myfirstrom_v1.0.zip
finding update package...
opening update package...
installing update...
amend scriting (update-script) is no longer supported.
amend scripting was deprecated by google in android 1.5.
it was necessary to remove it when upgrading to clockworkmod 3.0 gingerbread based recovery.
please switch to edify scripting (update-script and update-binary) to create working update zip packages.
installing aborted.
then i press on : toggle signature verification & toggle script asserts:
signature check: enabled
script asserts: enabled
and try again to install the ROM:
installing: /sdcard/myfirstrom_v1.0.zip
finding update package...
opening update package...
verifying update package...
E:signature verification faild
Installation aborted
i hope now it is clear, waiting your help.
i found the reason here:
http://forum.xda-developers.com/showthread.php?t=897026
it is because of CWM, i have CWM 5, it seems it should be CWM 2 to work with this custom ROM, i will try to flash other ROM.
hafezs said:
i found the reason here:
http://forum.xda-developers.com/showthread.php?t=897026
it is because of CWM, i have CWM 5, it seems it should be CWM 2 to work with this custom ROM, i will try to flash other ROM.
Click to expand...
Click to collapse
doomkernel v6 does not have cwm 5 ,i guess you have installed cwm auto installer,so you are getting error,doomkernel v6 has already recovery compiled,just try hitting back button when blue light turns on
techdevilisnowmonster said:
doomkernel v6 does not have cwm 5 ,i guess you have installed cwm auto installer,so you are getting error,doomkernel v6 has already recovery compiled,just try hitting back button when blue light turns on
Click to expand...
Click to collapse
thank you too much i did not know that i should hit the back button, i was hitting the volume up button and i was going to CWM recover.
by the way i installed CWM 5 via flashtool, but it seems it is useless.
I succeeded in installing the custom ROM.
thanks for your help.
hafezs said:
thank you too much i did not know that i should hit the back button, i was hitting the volume up button and i was going to CWM recover.
by the way i installed CWM 5 via flashtool, but it seems it is useless.
I succeeded in installing the custom ROM.
thanks for your help.
Click to expand...
Click to collapse
cwm 5 is not useless,the thing is that you are trying to install a rom based on old scripting(amend) to new cwm so you were getting error coz for cwm 5 you need to flash a rom with edify script..
cheers:laugh:
I have updated Feralab from working v29 to 30 FINAL.
After installing v30, I can't turn on my WiFi, it says "Error". I have tried to update kernel to 12.1. (LB)
But everytime I want to install it from xrecovery it says:
"Amend scripting (update-script) is no longer suppported.
Amend scripting was deprecated by google in Android 1.5.
It was necessary to remove it when upgrading to the ClockworkMod 3.0 Gingerbread based recovery.
Please switch to Edify scripting (updater-script and update-binary) to create working update zip packages.
INSTALLATION ABORTED".
Please somebody will you help me?
niltonro said:
I have updated Feralab from working v29 to 30 FINAL.
After installing v30, I can't turn on my WiFi, it says "Error". I have tried to update kernel to 12.1. (LB)
But everytime I want to install it from xrecovery it says:
"Amend scripting (update-script) is no longer suppported.
Amend scripting was deprecated by google in Android 1.5.
It was necessary to remove it when upgrading to the ClockworkMod 3.0 Gingerbread based recovery.
Please switch to Edify scripting (updater-script and update-binary) to create working update zip packages.
INSTALLATION ABORTED".
Please somebody will you help me?
Click to expand...
Click to collapse
The Same with me My Friend ... Let's Try Android 4.3 !
please help me to resolve x10 flashing issue
--> Xperia x10, flashed with 2.3.3
--> Rooted , installed xrecovery
--> Locked boot loader
Steps followed to install FeraLab v29
-------------------------------------------
1. Booted into xRecovery
2. Install custom ROM
3. Chosen FeraKernel.zip
Failed on certification issue
then Installed CMW recovery, Could not flash ferakernel
Tried to flash Feravolt v29 ROM it works, but stays in SE logo in 1st reboot..
Please help me...
Drivers?
niltonro said:
I have updated Feralab from working v29 to 30 FINAL.
After installing v30, I can't turn on my WiFi, it says "Error". I have tried to update kernel to 12.1. (LB)
But everytime I want to install it from xrecovery it says:
"Amend scripting (update-script) is no longer suppported.
Amend scripting was deprecated by google in Android 1.5.
It was necessary to remove it when upgrading to the ClockworkMod 3.0 Gingerbread based recovery.
Please switch to Edify scripting (updater-script and update-binary) to create working update zip packages.
INSTALLATION ABORTED".
Please somebody will you help me?
Click to expand...
Click to collapse
Ronald G V A said:
The Same with me My Friend ... Let's Try Android 4.3 !
Click to expand...
Click to collapse
If you're on an unlocked bootloader install the wifi drivers, the file is available on his website.
Good Luck...