Think I bricked my phone somehow. To the story, I had phone in download mode to flash the leodroid rom which didn't flash at all, as I waited for 10mins to see if it would flash, but to no avail. Anyway, after that I disconnected the phone from pc, removed the battery, inserted the battery again then BOOM! Nothing, no download mode, no recovery, no boot screen, just a blank screen, a brick.
Dunno, if anyone else has had this problem, but if you managed to somehow get yours working again please tell me! And if you can't, guess I'll have to send it back. Anyone know how to deal with online shops, when returning phones?
Cheers in advance.
Zeelz
I`m assuming you`re unable to use volume down + Home + Power buttons together and keep holding them until a menu appears on the screen?
ZeeL;14713285
BOOM! Nothing said:
http://forum.xda-developers.com/showthread.php?t=1068522[/url]
And if you can't, guess I'll have to send it back. Anyone know how to deal with online shops, when returning phones?
Flash original rom remove root reset binary counter first .
jje
Click to expand...
Click to collapse
I'm no expert when it comes to things like this
but if you can't access download mode via the button combos
have you tried using one of these 'usb jigs'?
http://www.youtube.com/watch?v=9YRPWU4waa4
it should force your phone into download mode
i think you can either purchase them from a member of this site, forgotten his name :\, or there are plenty of options on ebay
ZeeL said:
Think I bricked my phone somehow. To the story, I had phone in download mode to flash the leodroid rom which didn't flash at all, as I waited for 10mins to see if it would flash, but to no avail. Anyway, after that I disconnected the phone from pc, removed the battery, inserted the battery again then BOOM! Nothing, no download mode, no recovery, no boot screen, just a blank screen, a brick.
Dunno, if anyone else has had this problem, but if you managed to somehow get yours working again please tell me! And if you can't, guess I'll have to send it back. Anyone know how to deal with online shops, when returning phones?
Cheers in advance.
Zeelz
Click to expand...
Click to collapse
Leodroid, I am guessing this is not a SGS2 rom ?
Well hopefully a JIG works, I have ordered one from ebay earlier this week, hope it comes soon. And yeh the 3 button combos doesn't work. Although I thought the jig won't work if you're unable to power on your phone. Guess I'll give it a go regardless. It wouldn't hurt to try.
Cheers the the help guys
godutch said:
Leodroid, I am guessing this is not a SGS2 rom ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1119622
it is, although its under investigation right now.
i had this issue but i was able to go back using 3 button procedure.
i would suggest you take battery out and pop it in and immediately hold the 3 buttons and don't let go until you see something on the screen.
Also, i made my usb jig the other day .. it literally took 10 minutes cutting thru the usb. Just go to any electronics shop and get 300K ohms transistor. put the usb you made in your phone and connect the transistor with your hand on the correct pins .. no need to even solder anything .. just make them touch for few seconds.
My brother held the phone and i held the transistor ... poped the battery in and i was at download mode.
best of luck.
Hi,
I have exactly the same problem here with my phone, a brand new Samsung Galaxy S II.
After trying to flash a new firmware I rebooted my phone into "Downloading mode" and starting (i think) a veery earli version of Odin3 software. But when I didnt know what to do I just shut down my phone and closed the applikation.
And then: Totally stone dead, as a brick. I have ordered a USB-thing from ebay, but I'm pretty sure it aint going to work. No response on either powerbuttons, combos or anything else. Just a black screen. Is the only solution to send it in to Samsung service center or is it any else more possibilty? (Excuse me for bad grammar.)
JJEgan said:
Flash original rom remove root reset binary counter first .
jje
Click to expand...
Click to collapse
Why would he need to do that? He can't even see the Download mode screen. How is anyone at Samsung Service center going to see a counter that won't even come on.
Samsung Service Center is going to just jtag flash it, then send it back. Which also wipes the counter, and even if there is a hidden counter, it's erases that as well.
Anyways, I don't think the USB Jig would work. USB Jig will only work if the bootloader is still intact. The USB JIG uses a 300k or 301k resistor, not transistor.
The reason the thread is closed is because it was based off someone else's work, and not giving any credit.
Related
I was flashing my Vibrant back to the stock ROM using ODIN, and I had the re-partition checked off... and I think this is what killed my vibrant. If I click the power button it doesn't do anything. It has a full battery and even with it on the charger... still nothing. I can't see anything on the screen. What are my options to fix my Vibrant?
Timz917 said:
I was flashing my Vibrant back to the stock ROM using ODIN, and I had the re-partition checked off... and I think this is what killed my vibrant. If I click the power button it doesn't do anything. It has a full battery and even with it on the charger... still nothing. I can't see anything on the screen. What are my options to fix my Vibrant?
Click to expand...
Click to collapse
What were you flashing to stock from?
Can you enter download mode?
Sent from my GT-I9000 using Tapatalk
HELP IM SO WORRY HAS SAME PROBLEM OR WORSE
I upgraded to froyo 2.2 using Kies mini, and follow each step, till it finish of donwloading the oficial download from their server, in the tutorial says to wait for it to reboot but never did. what could happend? now im not able to power on, put in download mode, etc cause its acting like its dead, not even the usb im so scared caus ei just bought it on ebay HELLPPPPP PLEASE.
letor69 said:
HELP IM SO WORRY HAS SAME PROBLEM OR WORSE
I upgraded to froyo 2.2 using Kies mini, and follow each step, till it finish of donwloading the oficial download from their server, in the tutorial says to wait for it to reboot but never did. what could happend? now im not able to power on, put in download mode, etc cause its acting like its dead, not even the usb im so scared caus ei just bought it on ebay HELLPPPPP PLEASE.
Click to expand...
Click to collapse
Following these guide: http://forums.t-mobile.com/t5/Samsu...-upgrade-to-Android-2-2-Froyo-now/td-p/678871
Here are a couple of things to try. There are videos out there on utube also.
http://forum.xda-developers.com/showthread.php?t=954509
http://forum.xda-developers.com/showthread.php?t=819551
No I can't enter Download mode. I have no power at all.
nomadrider123 said:
Here are a couple of things to try. There are videos out there on utube also.
http://forum.xda-developers.com/showthread.php?t=954509
http://forum.xda-developers.com/showthread.php?t=819551
Click to expand...
Click to collapse
Have you tried a simple
pull the battery
put the battery back after a few second
start ODIN
connect USB to PC, but not to phone
hold the volume +/- key
connect USB to phone while holding vol +/- keys
http://www.youtube.com/watch?v=E9LYLoK1Qog
http://www.youtube.com/watch?v=qNts11IBZ8Y
I click the power button nothing happens. I plug in the usb, nothing happens.
Timz917 said:
I click the power button nothing happens. I plug in the usb, nothing happens.
Click to expand...
Click to collapse
Have you tried both at the same time?
pull the battery
put the battery back after a few seconds
start ODIN
connect USB to PC, but not to phone
hold the volume +/- key
connect USB to phone while holding vol +/- keys
nomadrider123 said:
Have you tried both at the same time?
pull the battery
put the battery back after a few seconds
start ODIN
connect USB to PC, but not to phone
hold the volume +/- key
connect USB to phone while holding vol +/- keys
Click to expand...
Click to collapse
SAME AS ME heeeeeeelllpppp
not a single button is working, either JIG i have it, what can i do?
Sorry to disappoint you; it seems that you are out of luck. I was flashing my Vibrant in the similar situation like yours and my phone has never turned on again since then (6 weeks). I live in Thailand and have been searching both English and Thai version for a solution. None comes up so far. The only way the USB jig will help is your phone can be powered up. I have tried that myself. You can look for the confirmation elsewhere in this forum. Any way if you can find a diy solution, please let me know and I will post it here if I can find one myself. Thanks!
http://forum.xda-developers.com/showthread.php?t=848737
I am wait on this line here on your link.
More methods coming soon
do you have insurance with tmobile?
i bricked mine before i had a good understanding of the whole rom flashing concept and i could get a downloading screen but i didnt know what to do so they replaced it with no problem.
call and ask all they can do is say no.
nomadrider123 said:
http://forum.xda-developers.com/showthread.php?t=848737
Click to expand...
Click to collapse
they bro, i appreciate that your trying to help the guy but read.
the title states its a "HARD BRICK" meaning it will not turn on. If the OP has enough sense to name the thread its a HARD brick, then i'm sure he knows what a hard brick is. All solutions your leading to cannot be done AT ALL. The phone is a paperweight, you cant do anything but 2 things:
@OP
Do one of these 2 things:
1) build a JIG costs around 10$ a bit more or a bit less. but no over than 15$
(search JIG for vibrant on youtube by mobiletechvideos)
2) Send it to tmobile.
I hard bricked my phone 4 days ago.
I called them, and their sending in a replacement, and i send them mine and im done.
It cost me 10$ for shipping and handling but thats it.
Timz917 said:
I was flashing my Vibrant back to the stock ROM using ODIN, and I had the re-partition checked off... and I think this is what killed my vibrant. If I click the power button it doesn't do anything. It has a full battery and even with it on the charger... still nothing. I can't see anything on the screen. What are my options to fix my Vibrant?
Click to expand...
Click to collapse
HOW ABOIUT LEAVE PHONE CHARGING FOR 10 GO IN TO DARK ROOM SHUT OFF LIGHT PRESS POWER BUTTON AND SEE IF BACK LIGHT OF SCREEN LIGHTS UP, IF SO I TOLD YOU SO I HAD THE SAME BUT MY VIBRANT WORKS AGAIN UNLIKE YOURS p
xriderx66 said:
they bro, i appreciate that your trying to help the guy but read.
the title states its a "HARD BRICK" meaning it will not turn on. If the OP has enough sense to name the thread its a HARD brick, then i'm sure he knows what a hard brick is. All solutions your leading to cannot be done AT ALL. The phone is a paperweight, you cant do anything but 2 things:
@OP
Do one of these 2 things:
1) build a JIG costs around 10$ a bit more or a bit less. but no over than 15$
(search JIG for vibrant on youtube by mobiletechvideos)
2) Send it to tmobile.
I hard bricked my phone 4 days ago.
I called them, and their sending in a replacement, and i send them mine and im done.
It cost me 10$ for shipping and handling but thats it.
Click to expand...
Click to collapse
Your first option is out because I have tried that. The only option left is the second one. since I live in Thailand, I have to ship the phone to my friend in Los Angeles to have him replace it for me. It is costly, but at least I will get a phone to work.
It seems to me that this issue is a special case that doesn't happen very often. Only the chosen ones will get into trouble like this when making an error here and there while flashing rom.
I had an IPhone 3G before and, of course, I made mistakes while updating it with all kinds of firmware, but the hardware never fails on me no matter what I did.
Thanks all who try to help.
xriderx66 said:
they bro, i appreciate that your trying to help the guy but read.
the title states its a "HARD BRICK" meaning it will not turn on. If the OP has enough sense to name the thread its a HARD brick, then i'm sure he knows what a hard brick is. All solutions your leading to cannot be done AT ALL. The phone is a paperweight, you cant do anything but 2 things:
@OP
Do one of these 2 things:
1) build a JIG costs around 10$ a bit more or a bit less. but no over than 15$
(search JIG for vibrant on youtube by mobiletechvideos)
2) Send it to tmobile.
I hard bricked my phone 4 days ago.
I called them, and their sending in a replacement, and i send them mine and im done.
It cost me 10$ for shipping and handling but thats it.
Click to expand...
Click to collapse
Just because he put hard bricked in the title means little. It was his first post. He very well could be a aviid user. All I could go by is he said he hit power and nothing happend thats about all he said over and over. No battery pull 3 button try. So what I did was try to help thats it. I did not suggest anything to make matters worse. A lot of ppl thought their phones were "hard bricked" but they got it to come out of it. Just because your more of a wiz then most ppl here. I would appreciate if you would get off my back a bit for I was just trying to help.
nomadrider123 said:
Just because he put hard bricked in the title means little. It was his first post. He very well could be a aviid user. All I could go by is he said he hit power and nothing happend thats about all he said over and over. No battery pull 3 button try. So what I did was try to help thats it. I did not suggest anything to make matters worse. A lot of ppl thought their phones were "hard bricked" but they got it to come out of it. Just because your more of a wiz then most ppl here. I would appreciate if you would get off my back a bit for I was just trying to help.
Click to expand...
Click to collapse
I'm not getting on your back, why is it you think so?
Most of the users as i've encountered don't have the sense to name their threads appropriately, the OP on this one specifically named it HARD BRICKED, so instead of telling him to do all these instructions, you could've asked 1 thing "when you plug your usb, or wall charger, does it show any lights? or Are there any symbols on the screen? any lights glowing?"
Those 2 questions could've saved him, and you time.
Trust me i'm a beginner as well, i just know how to get out of these because i've been with this problem a few times. Alot of people here know more than me, specifically s15.. idk his full name.
Hi,
Yesterday I tried to do a ROOT but I had a problem with the "Odin" software so I hade to turn off the galaxy manually...
But when I tried to turn it again' he wont turn on!
What can I do?
Thank you
Same problem...
I have the same problem, will not turn on. was adviced to but (UNBrick Samsung Galaxy S2 i9100 Download Mode USB Jig) from ebay but did not work.. Can anyone help... Phone makes a good door stop at the minute.. lol
Might find an answer faster in the gs2 forum.
Sent from my GT-I9000 using XDA App
Same issue....
did anyone mange to solve this issue?
Thanxs
Hard unbricking
yes look at mobile tech videos on youtube
Help
Thanx , can you provide any link for that.....
Cheers
Unbricking
Sorry i cant leave a link here as im new maybe you or someone else can but type in youtube search mobile tech videos unbrick and the s2 is the second on the list they do ship worldwide and are based in the US.
Well done
Thanx mate, well done ....
Cheers
Send it in for repair but say nothing about odin or root
I have sent for repair
Already sent for repair. I said it would not switch on or charge. To be honest I feel that samsung need to address this issue as if the operating system fails on a pc you can reload and away you go. The same should be said for a phone. There should be a fail safe that always puts the phone back to download mode. I thought the jig was the answer but not always so BE CAREFUL.
I sent my phone to tmobile they repaired it free
Repair Description
- Calibration
- Software update
- Replacement - A/S ASSY-PBA MAIN(COMM)GT_I9100
- Screening
same issue
my computer crashd in the middle of the odin update. and my phone is allso dead now...
the only solution was to send it to service?
depends, if the process was interrupted during the flash the bootloader, the phone is dead
sykokidd said:
my computer crashd in the middle of the odin update. and my phone is allso dead now...
the only solution was to send it to service?
Click to expand...
Click to collapse
Was is ???
Nope a USB recovery jig may enable download mode or even a JTag repair would be cheaper than paid for Samsung service .
jje
I had the same issue flasg siyahs kernel after flashing the rom and ur phone should start xD
Sent from my GT-I9100 using xda premium
yeh, thats what happened, no buttons work, jig dont work. nothing... sending it to service tomorrow.... aaaaaaaah damn rental phones hehe
my sgs2 is dead too....same issues... no reaction to anything possible to do: charger, usb gig, hardware buttons, etc.
JIG?
Has anyone had any success with the USB JIG and a 'hard' bricked phone?
H00pyFr00d said:
Has anyone had any success with the USB JIG and a 'hard' bricked phone?
Click to expand...
Click to collapse
Same wonder
My SGS2 is hard bricked, no question about it. Nothing happens no matter what button press, usb connection etc. Dead as a doornail.
From what I've read the JIG will only help if you have, at bare minimum, backlights or a vibration when you hit the power button. As I have literally nothing this means I'm 'hard' bricked in which case the JIG shouldn't work.
I've a JIG on order and should arrive tomorrow. I'll try every which way with it, button combos, plugging in USB, removing and replacing battery etc. If i get any response or any success I'll report back. If not, I've found a few places that can JTAG so I'll go that route and again report back.
My friends just bought s2 for 5 days and didnt do any mods on it. So can say his phone is still a virgin. And suddenly this morning his phone can not turn on. Cant get into download/recovery mode. Hold down power button for 10seconds also no use. Is it using Jig is the only way to save his phone beside using warranty?
Obvious one first - sure the battery is charged?
Sounds daft, but seen it happen (and done it myself )
B3311 said:
Obvious one first - sure the battery is charged?
Sounds daft, but seen it happen (and done it myself )
Click to expand...
Click to collapse
Yes the battery is fully charged
You say "no mods" so why would you think about using a jig?
idi0t said:
My friends just bought s2 for 5 days and didnt do any mods on it. So can say his phone is still a virgin. And suddenly this morning his phone can not turn on. Cant get into download/recovery mode. Hold down power button for 10seconds also no use. Is it using Jig is the only way to save his phone beside using warranty?
Jig will only boot to download mode once in download mode its a question of flashing a stock Samsung rom.
5 days old no contest return to seller .
jje
Click to expand...
Click to collapse
Maybe a jig will work, but there's no backup to reflash.. I'm still jigless, there are many better qualified here than me, but I'm pretty sure a jig won't help if the phone is 100% hardbricked.
Anything at all happen when connected via USB to pc? Again, doubtful it will work, but worth a try
Sounds like a major hardware failure - I'd send it back pronto.
Edit - jj beat me too it. Is the phone new or second hand?
What i mean no mod is everything still running stock firmware original from factory. No roots etc. Nothing happened when attached to computer/laptop using cable data. I also guess its a hardware failure.
Anyways thank you all very much for all the infos. Guess my friend have to use his warranty. Never used my warranty although my phone counter already reached 70 hehehe
what i did when this hapened to me was charged it for couple hours plugged it into pc left it a few mins unplugged re-tried the same thing over and over and eventually pc gave me the connection sound which put a smile on my face which then booted into download mode and flashed stock rom through odin, if that fails to work then get it sent back to seller if it hasnt been flashed modded then a return and exchange/repair wont be a problem at all
idi0t said:
What i mean no mod is everything still running stock firmware original from factory. No roots etc. Nothing happened when attached to computer/laptop using cable data. I also guess its a hardware failure.
Anyways thank you all very much for all the infos. Guess my friend have to use his warranty. Never used my warranty although my phone counter already reached 70 hehehe
Click to expand...
Click to collapse
Just a question: How is the phone going to get bricked if you didn't do absolutely anything flashing related? Just give it back to the shop and get a new one if it's faulty, before it's too late. Also, maybe the battery was faulty and died; have you tried with another battery?
iamsloany said:
what i did when this hapened to me was charged it for couple hours plugged it into pc left it a few mins unplugged re-tried the same thing over and over and eventually pc gave me the connection sound which put a smile on my face which then booted into download mode and flashed stock rom through odin, if that fails to work then get it sent back to seller if it hasnt been flashed modded then a return and exchange/repair wont be a problem at all
Click to expand...
Click to collapse
Thx alot for your info. Will ask my friend to try it.
Astrofrigo said:
Just a question: How is the phone going to get bricked if you didn't do absolutely anything flashing related? Just give it back to the shop and get a new one if it's faulty, before it's too late. Also, maybe the battery was faulty and died; have you tried with another battery?
Click to expand...
Click to collapse
Its my friend's phone. Not mine. So i really dunno what happened. Not yet try with other battery.
Easy fix.....send it back!
Assuming it has warranty.
Sent from my GT-I9100T
I dropped my phone a few days ago and the power button stopped working. Reboot ed into recovery from Rom Manager and realized that I couldn't select anything because I need the power button (tried every other button as well; nothing works). Took the battery out and put it back in (the only way to turn it off now) and it instantly booted into recovery. I can't send it to AT&T because I have at least 10 counts and they'll instantly see that CWM is on there.
Please help me!
kancheek1995 said:
I dropped my phone a few days ago and the power button stopped working. Reboot ed into recovery from Rom Manager and realized that I couldn't select anything because I need the power button (tried every other button as well; nothing works). Took the battery out and put it back in (the only way to turn it off now) and it instantly booted into recovery. I can't send it to AT&T because I have at least 10 counts and they'll instantly see that CWM is on there.
Please help me!
Click to expand...
Click to collapse
You dropped your phone. Samsung/AT&T warranty doesn't cover accidents, so there's no sense in worrying about your flash count. You're SOL. But you are free to try of course. Reverting to stock is very easy. What would you even do in recovery mode to revert to stock? Did you bother to look around the forum? There is a guide in the general forum on how to do that.
Out of curiosity, I did a google search to see what the repair options were for a broken power button. Saw that Mobile Tech Videos does it for $35 + shipping. Might be one of the better options at this point. As for the counter, just buy or make a jig to reset it.
mzaur said:
You dropped your phone. Samsung/AT&T warranty doesn't cover accidents, so there's no sense in worrying about your flash count. You're SOL. But you are free to try of course. Reverting to stock is very easy. What would you even do in recovery mode to revert to stock? Did you bother to look around the forum? There is a guide in the general forum on how to do that.
Click to expand...
Click to collapse
They wouldn't know that I dropped it unless I told them that, so as of right now the button stopped working by itself. I reverted to stock a while ago when I thought I bricked it, but I need to get it into download mode which can't be done without the power button.
kancheek1995 said:
They wouldn't know that I dropped it unless I told them that, so as of right now the button stopped working by itself. I reverted to stock a while ago when I thought I bricked it, but I need to get it into download mode which can't be done without the power button.
Click to expand...
Click to collapse
Recovery mode requires the power button. Download mode only requires the two volume buttons. With the phone off, while holding down vol- & vol+ plug in USB cable.
Lawrence of a Labia said:
Out of curiosity, I did a google search to see what the repair options were for a broken power button. Saw that Mobile Tech Videos does it for $35 + shipping. Might be one of the better options at this point. As for the counter, just buy or make a jig to reset it.
Click to expand...
Click to collapse
Good info if I ever need this
Has anybody used mobile tech videos to get their power button fixed? Mine stopped working out of the blue today, my phone is long out of warranty, and it refuses to connect to my computer at all so I can't revert to stock (I'm running AOKP 6.27.12 Build right now). I don't want to just send my phone off to some place that isn't reputable.
elementlaxer said:
Has anybody used mobile tech videos to get their power button fixed? Mine stopped working out of the blue today, my phone is long out of warranty, and it refuses to connect to my computer at all so I can't revert to stock (I'm running AOKP 6.27.12 Build right now). I don't want to just send my phone off to some place that isn't reputable.
Click to expand...
Click to collapse
It's still got to be in warranty with Samsung. The first units were shipped just under 9 months ago.
Mobile tech videos is considered to be quite reputable. I have only seen good reports about them, and the owner posts actively on the XDA-Developers boards.
You should be able to enter download mode. You don't need the power button for that.
Darn I didn't realize how long Samsung's warranties were. I made the switch back in October from Apple products so I'm used to crappy warranties.
I've already shipped to mobile tech videos because I searched around the forums a bit and found out that he is in fact reputable.
And I know how to get into download mode, I can do that no problem. My computer always pops up saying there is some problem with the device and I'm not sure how to fix it. I have the drivers installed correctly and it has worked in the past, but not recently. I would try to replicate it now but I don't have the phone in my possession, and at the moment it isn't really causing me an issue.
If you can't get Odin to recognize the phone once connected to the computer in download mode, then it is most likely a driver problem, or less likely a problem with the USB cable or ports. Once you get the phone back, if you still have the problem, that is where to look first.
I just wanted to point out that the broken power button would not prevent you from returning the phone to stock, although it can be a bit of a problem that you can't use recovery.
Yeah I was a bit worried that if I tried to go through Odin and something got messed up I wouldn't be able to get back into recovery to restore from a backup.
Thanks for all the help! I feel like a total noob and I appreciate your patience haha
In case you haven't already tried, in some versions of CWM (even non-touch) the search button (softkey) works like enter. Try all of the softkeys, one of them might work for you.
Yes, but if you Odin back to stock with a broken power button, that leaves you with stock 3e recovery. Even if you use adb reboot recovery to get into 3e recovery, you can't select anything without the power button.
Basically during jailbreaking I unplugged the phone from the computer accidently. After that it just stopped working... doesnt turn on, no lights, no recovery mode or download mode. It just gets warm when I connect it to the computer to charge it. I tried the vol up / down + home button + power button but nothing has worked for me. I also took out the battery and tried it again. Will using a jig help me get into download mode?
Thank you so much!!! I am new here so I appreciate everyone who replies
use a jig or send to service centre.
aaronx88 said:
use a jig or send to service centre.
Click to expand...
Click to collapse
Ok I will try the jig then. Do you have experience with it? I will post my results.
(btw I cant send it to a service center)
The JIG may work. If not, a JTAG might save it, if not, Samsung Repair Centre is your only hope. If your lucky, the phone wasn't actually rooted during the process, so they shouldn't deny you servicing.
Sent from my GT-I9100 using xda app-developers app
Ineedajig said:
Basically during jailbreaking I unplugged the phone from the computer accidently. After that it just stopped working... doesnt turn on, no lights, no recovery mode or download mode. It just gets warm when I connect it to the computer to charge it. I tried the vol up / down + home button + power button but nothing has worked for me. I also took out the battery and tried it again. Will using a jig help me get into download mode?
Thank you so much!!! I am new here so I appreciate everyone who replies
Click to expand...
Click to collapse
Hi there,
Sorry to hear about your phone, the only way to recover from this sort of hard brick is JTAG or Samsung service centre repair.
Good luck!
Hope you get it fixed
Had the same problem a while back.
I'd downloaded the ROM, but stupidly did not check the MD5. Turns out that I'd gotten a corrupt ROM.
I flashed away. All went well until near the end (factoryfs.img) where Odin said FAIL. I was still in Download Mode.
Tried another flash, but Odin wouldn't see the device anymore. Worryingly, I pulled the device from USB and took out the battery.
Put it in again and turned it on. Well, I tried to turn it on. That was it. The phone was dead.
I had warranty, so I called Samsung and fooled them into thinking that my phone had died itself whilst I was charging it.
They charged me a small charge (£50 or something like that) and it came back, good as new.
From this day I always compare MD5s.
I'm sorry but there really is no way to fix a hard brick without the help of Samsung Repair Centers or JTAG.
Oh, well I am going to try using a jig first. I hope it works, you installed odin once you got into DL mode but it failed, correct? If that does not work... will the JTAG work? Is it really expensive? Thank you all for your help!
USB jig may work.
USB jig will defiantly work that i think.
if not, then after you should go to service center.
JTAG is the best option but its costly somewhat.
please click thankx if you find it helpful.
thank you.