I brick my phone x10 mini and it's now stuck in SE white written name. I searched in forum and I found few solutions. I try flash tool and we succeeded to re-flash , but still not working. There has been no change, the phone remains stuck . (sorry for my english , but I don't speak very good english)
TNX in advanced !
Install SEUS on your PC/Laptop.
Switch off your phone and hold the back key whilst you insert your usb cable, the SEUS should reckognise your phone after you have accepted their T&C's and ready to reflash... It should work..
Warning: You will lose all your data what is stored on your phone memory.
tnx very much. work perfect !
awpboss said:
tnx very much. work perfect !
Click to expand...
Click to collapse
A pleasure to have helped you out!
There needs to be someway this is reinforced to everyone - Brick = SEUS.
Praise the internets for giving us this community.
Seus lol so easy but asked so much SEUS lol
TimmyHate said:
There needs to be someway this is reinforced to everyone - Brick = SEUS.
Praise the internets for giving us this community.
Click to expand...
Click to collapse
sent from this midget x10 mini pro using cm7.2.3.3 14.5
Can you give me the link for downloading SEUS that support X10 mini
Hi im have the same problem
But when im follow the steps to flash mode SEUS tellme its the latest version already in your Phone, and continue stuck in SE white logo
Please helpme to reflash if its posible im can go directly for gingerbread? 2.3.5 CM?
Thanks
sectorzero said:
Hi im have the same problem
But when im follow the steps to flash mode SEUS tellme its the latest version already in your Phone, and continue stuck in SE white logo
Please helpme to reflash if its posible im can go directly for gingerbread? 2.3.5 CM?
Thanks
Click to expand...
Click to collapse
Even with "ur phone is up to date" you r able to click on Repair button, that solves all your problems.
NOOB question!
albanezi said:
Install SEUS on your PC/Laptop.
Switch off your phone and hold the back key whilst you insert your usb cable, the SEUS should reckognise your phone after you have accepted their T&C's and ready to reflash... It should work..
Warning: You will lose all your data what is stored on your phone memory.
Click to expand...
Click to collapse
I guess I'm a total noob here, but how do you turn the phone off when it's stuck on the SE logo screen? I mean pressing and holding the power button doesn't do anything....
velo25 said:
I guess I'm a total noob here, but how do you turn the phone off when it's stuck on the SE logo screen? I mean pressing and holding the power button doesn't do anything....
Click to expand...
Click to collapse
Taking out the battery will put it off
In defense of the noobs around here i can't find the repair button n'or does SEUS give me the Install Anyway option. Have the latest SEUS and now i'm trying an older one hope it works, but for precaution can anybody post a link to an alternative flashing tool ? Much appreciated.
Related
Dear board members after searching this great forum i like to ask you all for help!
Yesterday i did some update with SEUS on my X10MP,after i started SEUS i only could select reinstall,because i allready had newest version!
So i did reinstall!
Forgive me,but that sucks!
after downloading it started to send to my X10MP,after 10 seconds it displayed :error no connection!
I tried to turn my X10MP on,but,nothing!
the only thing that happend,blinking green led,and some vibration!
Non of the programs seems to connect with the device!(SEUS,Pc Companion,X10 Flasher)
So,any help!
I want to bring it back alive again as soon as possible
hope someone could help me out!
WbR
Fzrfan
fzrfan said:
Dear board members after searching this great forum i like to ask you all for help!
Yesterday i did some update with SEUS on my X10MP,after i started SEUS i only could select reinstall,because i allready had newest version!
So i did reinstall!
Forgive me,but that sucks!
after downloading it started to send to my X10MP,after 10 seconds it displayed :error no connection!
I tried to turn my X10MP on,but,nothing!
the only thing that happend,blinking green led,and some vibration!
Non of the programs seems to connect with the device!(SEUS,Pc Companion,X10 Flasher)
So,any help!
I want to bring it back alive again as soon as possible
hope someone could help me out!
WbR
Fzrfan
Click to expand...
Click to collapse
remove battery,
connect usb cable
start seus
hold back button
put battery back in
witch moment do i have to put in battery?
sorry i`m a noob with android,always had siemens and did know all about this brand!
Tried it any moment!
untill now,no succes
no connection or update failed!
Make sure your using sony erricson update not pc companion
fzrfan said:
Tried it any moment!
untill now,no succes
no connection or update failed!
Click to expand...
Click to collapse
sent from this midget x10 mini pro using cm7.2.3.3 14.5
This can't fail it tells you what to do on screen
fzrfan said:
Tried it any moment!
untill now,no succes
no connection or update failed!
Click to expand...
Click to collapse
sent from this midget x10 mini pro using cm7.2.3.3 14.5
I think you have a very loose charging plug on your phone, your main aim is to keep the phone as steady as possible whilst you hold the back key. Make sure you are using SEUS as stated by another member of this forum. It should take you back to its original form which then you will have to root your phone and install xrec again and hopefully you will have had backed up your data to some point.
Hi guys!
I think I killed my phone. I upgraded to the GingerDx - V13 ROM, the first day it was working fine. Then the next day the screen is getting messed up until it won't start anymore. I tried using PC companion to hopefully factory reset it but (which it manages to finish the restoration) but now it is really not booting. It just lights up and then turns off. No SE logo or anything. Now I'm stuck as I don't know what to do next.
Thanks in advance to anyone that can help.
pabling19 said:
Hi guys!
I think I killed my phone. I upgraded to the GingerDx - V13 ROM, the first day it was working fine. Then the next day the screen is getting messed up until it won't start anymore. I tried using PC companion to hopefully factory reset it but (which it manages to finish the restoration) but now it is really not booting. It just lights up and then turns off. No SE logo or anything. Now I'm stuck as I don't know what to do next.
Thanks in advance to anyone that can help.
Click to expand...
Click to collapse
PC companion is not good.. try flash with SEUS..!! Google it..u may find a download..
In order to restore a bricked mini pro:
-Launch SEUS (NOT PC Companion)
-When asked to plug the phone, press Home+Back (and keep them pressed) and then plug the phone on usb.
-Release Home and only keep the "back" button pressed.
If you followed the sequence properly, you will see the green led on and flashing process will start. If not, try it again.
faiyyaz said:
PC companion is not good.. try flash with SEUS..!! Google it..u may find a download..
In order to restore a bricked mini pro:
-Launch SEUS (NOT PC Companion)
-When asked to plug the phone, press Home+Back (and keep them pressed) and then plug the phone on usb.
-Release Home and only keep the "back" button pressed.
If you followed the sequence properly, you will see the green led on and flashing process will start. If not, try it again.
Click to expand...
Click to collapse
I forgot to say that my LED is not working anymore (dunno why) I am trying to find SEUS installer. It seemed like you can't download it through SE's website.
EDIT:
WTF?! I dunno there's another XPERIA Mini Pro which is NOT X10 Mini Pro. I flashed my X10 Mini Pro with the Xperia Mini Pro ROM Maybe that's why it's not booting anymore.
I tried reflashing it with the correct X10 Mini Pro (via PC Companion) ROM but still no effect. Maybe I messed up the phone big time? I will try SEUS if I can find one. I hope it works.
pabling19 said:
I forgot to say that my LED is not working anymore (dunno why) I am trying to find SEUS installer. It seemed like you can't download it through SE's website.
EDIT:
WTF?! I dunno there's another XPERIA Mini Pro which is NOT X10 Mini Pro. I flashed my X10 Mini Pro with the Xperia Mini Pro ROM Maybe that's why it's not booting anymore.
I tried reflashing it with the correct X10 Mini Pro (via PC Companion) ROM but still no effect. Maybe I messed up the phone big time? I will try SEUS if I can find one. I hope it works.
Click to expand...
Click to collapse
Looks like a hard brick in my opinion if you flashed the wrong phone's firmware I suggest you send the phone back to SE for repair.
pabling19 said:
I forgot to say that my LED is not working anymore (dunno why) I am trying to find SEUS installer. It seemed like you can't download it through SE's website.
EDIT:
WTF?! I dunno there's another XPERIA Mini Pro which is NOT X10 Mini Pro. I flashed my X10 Mini Pro with the Xperia Mini Pro ROM Maybe that's why it's not booting anymore.
I tried reflashing it with the correct X10 Mini Pro (via PC Companion) ROM but still no effect. Maybe I messed up the phone big time? I will try SEUS if I can find one. I hope it works.
Click to expand...
Click to collapse
You can get SEUS here
http://dl-www.sonyericsson.com/cws/download/1/110/61/1309763183/Update_Service_Setup-2.11.7.13.exe just see if it works
faiyyaz;17405774[QUOTE said:
]You can get SEUS here
http://dl-www.sonyericsson.com/cws/download/1/110/61/1309763183/Update_Service_Setup-2.11.7.13.exe just see if it works
Click to expand...
Click to collapse
Hi,
Thanks a lot for the link. I tried using it, still not working. I have a feeling that it really is hard bricked now. My next try will be using flashtool this time.
Edit:
Tried FlashTool, still dead. My phone needs an overhaul Too bad it's not under warranty anymore
try to unplug your batterie, wait ... plug the batterie, start into recovery ( clockmod ) and reflash with a new rom .
If your bootloader is lock, you cant brick your phone
How to rescue our bricked phone for x8 http://forum.xda-developers.com/showthread.php?t=1011071
PS: Are you sure you have the good firmware ?
In the post of doixant ( x8 ), you can see : Latest kernel and latest baseband xxx015
Another exemple : MiniCM7 for X10 mini ( not pro ) : Latest 2.1.1.A.0.6/2.1.1.C.0.0 SE firmware / Baseband: M76XX-TSNCJOLYM-53404015 due to kernel dependencies. This is automatically tested during the installation.
I guess, it's same for all custom rom
Sorry for my bad English
faiyyaz said:
PC companion is not good.. try flash with SEUS..!! Google it..u may find a download..
In order to restore a bricked mini pro:
-Launch SEUS (NOT PC Companion)
-When asked to plug the phone, press Home+Back (and keep them pressed) and then plug the phone on usb.
-Release Home and only keep the "back" button pressed.
If you followed the sequence properly, you will see the green led on and flashing process will start. If not, try it again.
Click to expand...
Click to collapse
I ve never press Home+Back , only back.
Sorry for double post
Edit :
pabling19 said:
Hi,
Thanks a lot for the link. I tried using it, still not working. I have a feeling that it really is hard bricked now. My next try will be using flashtool this time.
Edit:
Tried FlashTool, still dead. My phone needs an overhaul Too bad it's not under warranty anymore
Click to expand...
Click to collapse
Do you have already use Flashtool ?
If your are under Vista or Win 7, you must disable the UAC ( User Account Control ) for flashtool works. Search in google, I m french and i've found lots of pages, but in french.
Sorry if is useless, and for my bad English
pabling19 said:
faiyyaz;17405774
Hi said:
How is that the flash tool isnt workin?? Are u followin the steps properly..??
Well follow the 1st two instruction's here for flashtool of steps for installinng any ROM..
http://forum.xda-developers.com/showthread.php?p=16412835
Download flashtool n stock files.. See if it works.. N if on vista see wat spliff said..
Gintonic.SE by slade..
Click to expand...
Click to collapse
Click to expand...
Click to collapse
I don 't know if you must put your phone into debugg USB for flashtool works. Try
@OP
I'm sorry, but I really think your phone IS a hard brick now . I remember reading about a user that flashed a Galaxy S firmware onto his Galaxy S2, in the end he had to send his phone to the repair shop.
The same is probably true of your phone. I think you had better send it to the repair shop .
ok so i was trying to unlock my bootloader and i didnt see that my netbooks battery was just about dead so half way through my laptop died and now my mini pro wont power up charge turn on but its not being seen by seus or flash tool just hoping that someone out there had this problem and could have a fix
So seus doesnt see your phone in flash mode?
Now your in some **** man.. :/
My phone is getting no juice like its hard bricked but its charge but no led during charging and doesn't turn on
the inspired 4g
hold power button, back button and connect it to pc nd try to flash with seus. see that all the drivers are installed.
ive tried power button thing but still nothing when i plug it i get no led no screen light up but here is a few pictures i even watch the video read the post for flash tool but i cant it to power on at all
is led working??
siddardha21 said:
is led working??
Click to expand...
Click to collapse
No led doesn't turn on I just bought the phone last week
the inspired 4g
it might sound foolish, but if u r still goin thro the same problem, try to flash stock rom using flashtool.
jst dnt connect ur phone..bt start flashtool n start flashing..it will ask u to remove device,hold back button n insert it again..
try doing it,bcz once i was goin thro same problem n it worked for me!!
nowseewhatudid said:
ok so i was trying to unlock my bootloader and i didnt see that my netbooks battery was just about dead so half way through my laptop died and now my mini pro wont power up charge turn on but its not being seen by seus or flash tool just hoping that someone out there had this problem and could have a fix
Click to expand...
Click to collapse
Hey i have this same problem, i used SE_tweaker tool v4.0, and followed ALL THE INSTRUCTIONS, the program was unlocked suscefully the bootloader, but i turned off and, btw, dont load NOTHING. THE FLASH LED DONT TURNS ON WHILE CHARGING OR CONNECTING TO THE PC, Please, give me an answer, really, i donthave money to buy a phone or send to maintenance, and the Sony Ericsson guarantee has avoid. I am cryiing, REAALLYY!!
PLEEEEEEEEEEAAASEE!!!
X10 mini pro
Can the device enters flash mode ? If yes, try to flash stock kernel using flashtool, or using SEUS...
If it can't enter flash mode, I'm sorry, the I/0 maybe ruined....
Sent from my U20i using XDA
Please.. HEEELLLLPPP!!!
StardustGeass said:
Can the device enters flash mode ? If yes, try to flash stock kernel using flashtool, or using SEUS...
If it can't enter flash mode, I'm sorry, the I/0 maybe ruined....
Sent from my U20i using XDA
Click to expand...
Click to collapse
And... if not........ ???? I tried the flashmode, (i enter quickly in this because i have the combination, anytime i try, everytime green led) but the green led doesn´t turn on not responses, nothing works, my cellphone is a beautiful lego bricked phone.
Any other way? adb, circuit shock, other????
D,: D,: D,:
Pleeeaseee!!!!
Same situation... I heard that
Serial Cable + Setool2 is the only way, but requires activated dongle...
If I succed I'll post about it.
skirhir said:
Same situation... I heard that
Serial Cable + Setool2 is the only way, but requires activated dongle...
If I succed I'll post about it.
Click to expand...
Click to collapse
But is possible... =D =D =D, i dont want to loose my phone, if is possible i search for money and send to the technician to repair the phone =D
sorry for my bad english, and thanks fot help
---------- Post added at 10:22 AM ---------- Previous post was at 09:51 AM ----------
Darcond said:
But is possible... =D =D =D, i dont want to loose my phone, if is possible i search for money and send to the technician to repair the phone =D
sorry for my bad english, and thanks fot help
Click to expand...
Click to collapse
How i do the serial cable? P_P and how to flash the bootloader? anyone knows? =D, im very thankful to give me attention, sorry for the noober questions
Listen tu me...
read this=> http://forum.xda-developers.com/showthread.php?t=1408380
Thanks if i helped jou
SeeZaar said:
read this=> http://forum.xda-developers.com/showthread.php?t=1408380
Thanks if i helped jou
Click to expand...
Click to collapse
=D a loop, but thanks for helping
could be the battery. removing it for a couple of seconds or a minute if you like. do some initial charging like 5 to 10 mins or so then try it again. ive seen a couple of post that it worked that way.
demoniacs said:
could be the battery. removing it for a couple of seconds or a minute if you like. do some initial charging like 5 to 10 mins or so then try it again. ive seen a couple of post that it worked that way.
Click to expand...
Click to collapse
no burn risk?
Try this...
nowseewhatudid said:
ok so i was trying to unlock my bootloader and i didnt see that my netbooks battery was just about dead so half way through my laptop died and now my mini pro wont power up charge turn on but its not being seen by seus or flash tool just hoping that someone out there had this problem and could have a fix
Click to expand...
Click to collapse
Here you go: http://forum.xda-developers.com/showthread.php?t=1268064
Just hit Thanks...
kiki6639 said:
Here you go: http://forum.xda-developers.com/showthread.php?t=1268064
Just hit Thanks...
Click to expand...
Click to collapse
Hey one problem, THE PHONE DOESN´T TURN ON, THE FLASH LED DONT WORKS,
HM.... i listened about riff, any way to flash without the box?
Pleeaseee, if you want to help, please, read all the posted before comment, but, , thanks
Darcond said:
Hey one problem, THE PHONE DOESN´T TURN ON, THE FLASH LED DONT WORKS,
HM.... i listened about riff, any way to flash without the box?
Pleeaseee, if you want to help, please, read all the posted before comment, but, , thanks
Click to expand...
Click to collapse
Sorry, i have lazy eyes.
Try this:
calangoni said:
I had the same problem. I tried some key combinations like "Power + Back" or "Power + Menu" and it didn't work, but when I tried "Power + Home" the phone came back alive!
Click to expand...
Click to collapse
kkkhattak said:
with speaker there is cover remove it and there is a place.place the needle in it for 1minute and then reply me
Click to expand...
Click to collapse
Its from thread : [Q] Sony Ericsson Xperia x10 mini pro DEAD by gustavo.momente
[Q] [Really Need Help] Xperia Neo would not start, only shows "sony ericsson" :(
Hi guys, I am new to this forum and a new smartphone user.
Last night I was updating my phone through PC companion, but the software dies half way for some unknown reason. Since then I could not turn on my phone.. It will only vibrates, shows "Sony Ericsson", and then an image of yellow triangle with an exclamation mark shows up, then it is turned off again. I tried charging, restarting my pc companion software to try to update my phone, but none of them work.
I saw some threads here and it seems that there are possible solutions, but because the terminology is quite strange to me I could not fully understand what I have to do What is a flashtool and SEUS? I tried to search them up on the net but the downloads seem to be unavailable?? I must be missing something here.
If anyone can help me with simple terminology I will really really appreciate it.. Thanks a lot!
Your phone's boot loader unlocked or not & if yes what method?(s1tool,official SE or setool2 paid) ? Here's a good tutorial about flashtool.
lilbunnyf said:
Hi guys, I am new to this forum and a new smartphone user.
Last night I was updating my phone through PC companion, but the software dies half way for some unknown reason. Since then I could not turn on my phone.. It will only vibrates, shows "Sony Ericsson", and then an image of yellow triangle with an exclamation mark shows up, then it is turned off again. I tried charging, restarting my pc companion software to try to update my phone, but none of them work.
I saw some threads here and it seems that there are possible solutions, but because the terminology is quite strange to me I could not fully understand what I have to do What is a flashtool and SEUS? I tried to search them up on the net but the downloads seem to be unavailable?? I must be missing something here.
If anyone can help me with simple terminology I will really really appreciate it.. Thanks a lot!
Click to expand...
Click to collapse
Hi,
This is my suggestion:
first download FlashTool_0.2.9.1_FOTAUnbrick
http://forum.xda-developers.com/showthread.php?t=1126358
Follow instructions (if u familiar with updating with sony ericsson pc companion, this u can do)
Simple, start FlashTool_0.2.9.1_FOTAUnbrick, click flash. Choose loader.sin on the right. Then click OK,
Turn of phone, hold in back button while connect phone with usb cable.
See its flashing, wait til its done, unplug phone,. try to boot up phone.
I am also a newbie, but this worked for me
pls give me a link to download SEUS, for xperia neo pls. pls help I am having the same problem pls help,
emailprashanthvg said:
pls give me a link to download SEUS, for xperia neo pls. pls help I am having the same problem pls help,
Click to expand...
Click to collapse
Try: http://dl-www.sonyericsson.com/cws/download/1/110/61/1323075336/Update_Service_Setup-2.11.12.5.exe
Guys dont panic if you bricked your phone go through the Xperia neo Forums and im sure you can unbrick your phone i have bricked my phone 2 times and i was able to unbrick !
http://forum.xda-developers.com/show....php?t=1126358 ...even i suggest this page because this is were i was able to unbrick my phone successfully !
Thank you guys! My phone is finally working again!
lilbunnyf said:
Thank you guys! My phone is finally working again!
Click to expand...
Click to collapse
Good! Enjoy your neo!
abhinav333 said:
Guys dont panic if you bricked your phone go through the Xperia neo Forums and im sure you can unbrick your phone i have bricked my phone 2 times and i was able to unbrick !
http://forum.xda-developers.com/show....php?t=1126358 ...even i suggest this page because this is were i was able to unbrick my phone successfully !
Click to expand...
Click to collapse
I don't think link is right mate, 404 page not found
Anyway @lilbunnyf if your phones boot loader is unlocked using s1tool method do not use seus or pc companion.As I read in forum this can brick your phone.Try flashtool.If you got a locked boot loader or patched one with setool2 then you can use pc companion(this thing saved my phone like 5-6 times now after kinda bricking it with roms kudos se for this xD)
lilbunnyf said:
Thank you guys! My phone is finally working again!
Click to expand...
Click to collapse
oh xD didn't saw this,Good
lilbunnyf said:
Thank you guys! My phone is finally working again!
Click to expand...
Click to collapse
Tell us how did you unbrick it, maybe in future someone will have the same problem as you
dioggo92 said:
Tell us how did you unbrick it, maybe in future someone will have the same problem as you
Click to expand...
Click to collapse
LOL so your are ready to brick your phone !
dioggo92 said:
Tell us how did you unbrick it, maybe in future someone will have the same problem as you
Click to expand...
Click to collapse
Most likely the post #3. That should help.
I have the same problem...
but mine already unlock using s1tool, rooted using zergexploit and using cwm...
i wanted to install se tweak so i use cwm the installation is complete after rebooting my phone is bricked... so please... im begging help me...
i've tried using flashtool to reflash to stock but i cant get my phone connected... it seems i cant go to fastboot mode...
I managed to get stuck in a boot loop today. I have a locked bootloader and SEUS did the job, so I guess that is the best solution for the problem mentioned by OP.
JOeYJAcX said:
I have the same problem...
but mine already unlock using s1tool, rooted using zergexploit and using cwm...
i wanted to install se tweak so i use cwm the installation is complete after rebooting my phone is bricked... so please... im begging help me...
i've tried using flashtool to reflash to stock but i cant get my phone connected... it seems i cant go to fastboot mode...
Click to expand...
Click to collapse
Since you unlock it via s1tool, you should still be able to use SEUS.
Anw, why fastboot mode? Have you tried to connect it in flashmode?
I need to flash my X10 Mini, but I can't find the firmware for It anywhere with a working link. Anyone that still have the file and willing to share?
There are only plenty of links to sites that are down
I tried to install MiniCM7-2.1.9-robyn on the phone and then afterwards it just won't start anymore, so i need to flash it and then use SEUS to restore it.
UPDATE!
I found everything and fixed everything I needed by just flashing It with a stock kernel.
Just use the Repair option in Pc Companion.
Here
leajian said:
Just use the Repair option in Pc Companion.
Click to expand...
Click to collapse
wont work because I can't even get into the menus, I turn it on and It gets stuck on a screen with little backlight, but no SE logo
TrissyGE said:
Here
Click to expand...
Click to collapse
I'm not looking for how to do It..... Read the question before you post. I appreciate you trying to help, but at least understand what the question Is first.
I'm looking for the firmware for the flashtool so I can flash my device (.ftf file)
They guides that teaches you how to fix a bricked phone got links to megaupload (that got shutdown not long ago) and multiupload (also got shutdown) for the firmware I'm looking for.
If you can't turn the phone on, then flashtool won't help you. You have to able to turn the phone on to get to download mode for flashtool, or Pc Companion, or SEUS to do their thing.
If your phone doesn't turn on, you've got a hard brick. Which is bad.
Sent from my U20i using xda premium
Ticklefish said:
If you can't turn the phone on, then flashtool won't help you. You have to able to turn the phone on to get to download mode for flashtool, or Pc Companion, or SEUS to do their thing.
If your phone doesn't turn on, you've got a hard brick. Which is bad.
Sent from my U20i using xda premium
Click to expand...
Click to collapse
No, it can be a hard brick, he didn't do anything to put his device in danger (from what he claims).
He just needs a stock .ftf file for mini, which I was planning to do in the past, but did only for the pro... I am sorry my friend... There is only one solution -to make the ftf file yourself, which is something very confusing and you are going to need another mini to do this. But don't get your hopes down, it is possible, at least...
leajian said:
No, it can be a hard brick, he didn't do anything to put his device in danger (from what he claims).
He just needs a stock .ftf file for mini, which I was planning to do in the past, but did only for the pro... I am sorry my friend... There is only one solution -to make the ftf file yourself, which is something very confusing and you are going to need another mini to do this. But don't get your hopes down, it is possible, at least...
Click to expand...
Click to collapse
The phone it self comes to a point where there is some light on the screen, but i can't see the SE Logo anymore. I can charge the phone without problem from what it looks.
If I can get hold of another mini how can I make the ftf?
What did I do to achive this problem??
I tried to install MiniCM7-2.1.9-robyn and it ended with a phone that got stuck during boot. Then I got to a guide where someone said "Hardreset the device and use SEUS", but SEUS always says that my phone has the latest software.
TazBaz said:
The phone it self comes to a point where there is some light on the screen, but i can't see the SE Logo anymore. I can charge the phone without problem from what it looks.
If I can get hold of another mini how can I make the ftf?
What did I do to achive this problem??
I tried to install MiniCM7-2.1.9-robyn and it ended with a phone that got stuck during boot. Then I got to a guide where someone said "Hardreset the device and use SEUS", but SEUS always says that my phone has the latest software.
Click to expand...
Click to collapse
As far as SEUS is concerned, you DO have the latest software. It just doesn't realise that what you have doesn't work. Select the option to reinstall the software.
Sent from my U20i using xda premium
Ticklefish said:
As far as SEUS is concerned, you DO have the latest software. It just doesn't realise that what you have doesn't work. Select the option to reinstall the software.
Sent from my U20i using xda premium
Click to expand...
Click to collapse
Only one problem here, I don't have the option to reinstall the software at all after it says that I already have the latest software.
Can it be that the option is no longer there depending on SEUS version?
TazBaz said:
Only one problem here, I don't have the option to reinstall the software at all after it says that I already have the latest software.
Can it be that the option is no longer there depending on SEUS version?
Click to expand...
Click to collapse
There is a repair option in PC Companion, see it, please! The repair option on PC Companion is Support Zone --> Update --> Repair.
BTW, to hard reset :
1. Turn the phone off
2. Press the POWER button
3. Press and hold home key aprox 3 seconds
4. The hard reset is starting.
Hello there!!! I had the same problem just yesterday and I was about to get crazy in order to solve it...and then I found this post which was definately useful!!!! Just follow every single step and it will get back to work...btw I still can't flash the nAa-11 kernel with flashtool...it keeps on saying error and the flashing doesn't work
http://forum.xda-developers.com/showpost.php?p=20251565&postcount=8
leajian said:
There is a repair option in PC Companion, see it, please! The repair option on PC Companion is Support Zone --> Update --> Repair.
BTW, to hard reset :
1. Turn the phone off
2. Press the POWER button
3. Press and hold home key aprox 3 seconds
4. The hard reset is starting.
Click to expand...
Click to collapse
I will try that thanks, but you need to hard reset before the repair with PC Companion?
I managed to find the stock kernel so now I'm starting the device, but I get a SE logo and then It shuts off.
One problem when I try to repair on step 2 (prepare step) I get a error unable to start or phone update update components. (the pc companions is installed with the newest version)