I might have missed the perfect advice in searching here and there, but I couldn't find it, so I'm asking here.
I tried applying a nightly build for Cyanogen for Vibrant and now the phone is basically bricked.
It starts up, shows the Vibrant logo, brightens a bit, then shows a screen that in a second or two fills with random color noise, then restarts. This cycle repeats until I pop out the battery.
My model apparently won't respond to vol/power keypress combos to activate recovery or download mode so that was out.
I bought a microUSB jig and was able to get in download mode but ODIN doesn't ever recognize it.
I tried the adbtool to send it into recovery but it doesn't see the phone either.
I tried the AIO Vibrant Toolbox to reinstall drivers/odin/etc and it didn't help.
Finally just watching device manager seems to indicate that plugging it in and out doesn't absolutely nothing. Windows XP never sees a connection. I tried on a Windows 7 machine with similar results.
Any suggestions? Out of warranty so that means no replacement.
Thanks.
Kermit Woodall
Since you flashed cm7 you will need to install the Nexus S drivers. The regular Vibrant drivers will not work so that is likely why ODIN wont recognize the device. If you can get into download mode you shouldn't be hard bricked. Here is a link to download the Nexus S drivers (I believe this is the one I used)
http://dl.dropbox.com/u/8116690/Nexus S drivers.zip you might have to manually install this.
jordanjf86 said:
Since you flashed cm7 you will need to install the Nexus S drivers. The regular Vibrant drivers will not work so that is likely why ODIN wont recognize the device. If you can get into download mode you shouldn't be hard bricked. Here is a link to download the Nexus S drivers (I believe this is the one I used)
http://dl.dropbox.com/u/8116690/Nexus S drivers.zip you might have to manually install this.
Click to expand...
Click to collapse
This. If you are able to enter into Download Mode, you aren't bricked (unless you have a really really really bad luck).
This was extracted from the CM7 Q&A Thread on the Q&A section:
atinm said:
Q: Where can I get the Nexus S drivers?
A: Download and install the Android SDK here then download "Google USB Driver package, revision 4"
Once downloaded, right click on "Computer", "Manage", "Device Manager", "Nexus S", "Update Driver Software", and point it to wherever you isntalled the SDK
Click to expand...
Click to collapse
Also, if the above fails, the member connexion2005 offers unbrick services, and he seems to be good at it, he have a website and everything, just shot me a PM if you need the link to the website.
djluis48 said:
This. If you are able to enter into Download Mode, you aren't bricked (unless you have a really really really bad luck).
This was extracted from the CM7 Q&A Thread on the Q&A section:
Also, if the above fails, the member connexion2005 offers unbrick services, and he seems to be good at it, he have a website and everything, just shot me a PM if you need the link to the website.
Click to expand...
Click to collapse
Djluis, Good write up and assist...........
Thanks - I did try the above but when my phone is connected via USB the computer doesn't react at all. It's like I haven't plugged anything in. My other phone, a Nexus One, is recognized though.
Any ideas on how to force the install of these drivers before I have to pay connexion2005 for his services?
Thanks.
Kermit Woodall
Uninstall Samsung drivers, reboot PC, install drivers from aio box found in sticky thread or from samsung website. It should work. Also try heimdall if odin still doesn't work.
Sent from samsung vibrant
Tried the uninstall - no luck.
One issue... I'm not sure that USB Debugging Mode was selected before this all started. Could that be my problem?
Kermit Woodall
Hi,
try a different usb port and different usb cable
No luck. I suspect that this unit has a slightly bad USB port as well. Fortunately unbricking is affordable so that's what I'll have to do.
Thanks everyone for your advice.
K
kwoodall said:
No luck. I suspect that this unit has a slightly bad USB port as well. Fortunately unbricking is affordable so that's what I'll have to do.
Thanks everyone for your advice.
K
Click to expand...
Click to collapse
go to best buy, get a blackberry or HTC usb cord. most if the "bad" usb ports are the sh*T%y korean cords ( not knocking the people, just the company )
Thanks - I actually tried several USB cables - including some HTC and a Motorola one. None worked w/the phone - but worked fine with any other phone.
K
Related
Hey guys just wanted to say thanks for all the help you provide on a daily basis, for all the people trying to unlock the potential in their phones. However with that being said I might have tried too hard and messed up my phones. I have a Samsung Vibrant SGH-T595 with 2.1 (update 1) updated officially by Samsung.
I rooted the phone, used clock work recovery mod and then downloaded and installed cyanogenmod 7.1 RC. However in the end I did not like so I tried to go back using my backed up copy created by clockwork mod. Doing this has now what you would call "soft bricked" my phone.
The phone is currently stuck on the Samsung boot screen when trying to power on the device. I am unable to put it into download mode via the three button setup, but I bought a USB jig and it sets it into download mode.
Everything seems great at this point but the Odin program is unable to recognize my phone. I have downloaded the official Samsung Kies, and 64 bit drivers as well for my windows 7 system but it is unable to detect my phone. I believe it maybe a defective USB issue with this phone but not sure since it can be charged through USB but I can't remember the last time I was able to connect it to the PC and transfer files via the USB cable.
My question is what else can I do other then sell it for scrap?
Try another USB cable and different ports. It will recognize it eventually.
As you have a windows 7 x64 bit version i guess Odin may need to be opened by giving Administrator permissions.
Try right clicking odin and click Run as administrator. I guess this should work.
Ran into this issue last night with my wife's Nook Color and moving some file and driver issues. Guess what? It was a bad cord. Actually used my Vibrant cord and it was instantly recognized. Yes sometimes it IS actually THAT simple.
I also suggest you go to the Dev section and download the AIO Toolbox (links are live again and don't forget the .Net files too). Uninstall the drivers you have installed and run to toolbox. It has all the correct drivers, pit/tar files and Odin. It is an invaluable tool.
Sidenote: Kies is notorious for hardbricking devices. You should stay away from it altogether.
Woodrube said:
Sidenote: Kies is notorious for hardbricking devices. You should stay away from it altogether.
Click to expand...
Click to collapse
Exactly. And that is how i tried updating my vibrant to froyo and ended up hard bricking it..
Yeah like someone in here said, download aio vibrant toolkit.. its a surefire way to know your drivers are good and right.. once youve ruled them out, try a diff usb port and cable (mentioned above as well). If nothing works, then you may begin to entertain the idea that your phone is in difficult position.
Probably not hardbricked tho, vibrants are very resilient; just keep trying.
Then ttheres jtag and unbrickable mod if youre absolutely sure lifes over
Sent from a cell tower to the XDA server to you.
Thanks guys I ended up recycling my phones cause nothing I did worked. I did try AIO toolbox got the drivers, tried different cables. My SG II is able to be recognized by odin 1.85 with no issues but not my vibrant. I believe it is an issue with the vibrant's usb port. I originally rooted it by doing the update.zip fix from its external sd card, did not use my usb cable at that time. My other vibrant is completely hard bricked since it wont power on with two different fully charged batteries. Anyway thanks again and next time I will research more before modding my phones.
Hey OP,
I did the same exact thing as you and soft bricked it in the same manner. Then when I tried to get Odin to recognize the phone it wouldn't with my Samsung cable. I thought I was out of luck but I went and bought a USB cable made my Belkin from Meijer and Odin recognized it! I looked at the Samsung cable and the Belkin cable and the black plastic inside the microUSB in the Belkin is thicker than the Samsung. I think that helps create a tighter contact between phone microUSB and the cable. I thought I was screwed like you and I fixed the issue with a new cable!! That simple
I used the Samsung Galaxy S II usb cable which looks like it has a very tight connection with the contacts like you said. Thanks anyway I will try that brand of cable, if I ever run into that issue.
People!, I'm about to pull all my hair out on this one
Vibrant is soft bricked in a boot loop after a incomplete flash, I am able to get it into download mode but both my windows machines say USB device isnot recognized, and thus, I cant use ODIN to return to stock. When I try to manually point windows to the samsung drivers I get nothing…
So far I have tried drivers from:
-Bay_wolf's AIO Vibrant Toolbox 2.5
-USB drivers for vibrant from samsung support site
-Drivers from samsung keyes
Side notes that might help: I was perviously using a Hellybean Rom. My device displays "Galaxy S gt-9000" on boot... not sure when that came to be but maybe some rom changed some important recognition stuff??...
I found this thread http://forum.xda-developers.com/showthread.php?t=1008383 but no help...
Any help would be greatly appreciated!!
Try a different USB cable. This happens more than you'd think. Even cables that have worked just fine hundreds of times.
Also.... Locate the drivers in system/device manager and delete them manually and try to install them again. Unplug device and install fresh ones from either aio toolbox or Kies, then plug phone back in.
Best of luck!
Toast6977 said:
Try a different USB cable. This happens more than you'd think. Even cables that have worked just fine hundreds of times.
Also.... Locate the drivers in system/device manager and delete them manually and try to install them again. Unplug device and install fresh ones from either aio toolbox or Kies, then plug phone back in.
Best of luck!
Click to expand...
Click to collapse
Thanks a ton for reply but, sadly, no dice.
Tried connecting the phone, getting the "unrecognized device" prompt, finding "unknown device" in device manager, right clicking to uninstall. rebooting my machine, using various install methods to re-install drivers, re-connecting, and nothing.. same issue...
I lost the original cable a while back, but can't accept that NONE of the other 5 cables used are all broke... specially if the computer recognizes something going on... is it worth buying a new one?
Losing hope here, been like this for 4 days now, think it's time to go get a new phone. :crying:
Even so, it would have been nice to get what was a perfectly working phone back if only to keep it as a mp3 payer.
If anybody in New York, NY has a working odin set up that can do this for me, I have a 6 pack of your favorite beer with your name on it.
It could be a hardbrick such as bootloader getting corrupted that happened to my Sony Xperia Play (now an expensive paper weight).
I assume you boot into download mode by holding the two volume buttons, then connect the cable? Have you tried on a different PC? It can also be the weak powered USB port on the PC. Also when you uninstall the Samsung driver, check the option to also delete USB driver and uninstall any drivers. Also which version of the driver are you using, have you tried version Samsung USB Driver 1.5.3? And the drivers from here: http://www.samsung.com/us/support/owners/product/SGH-T959ZKATMB#
For what its worth, the gt i9000 screen appears after your on a custom GB boot loader and Odin back to stock (or probably Odin flashing any other ROM) you can change it by flashing the GB boot loader again. My phone says its a i9000 too, but I'm just about lazy enough to not bother changing it, lol.
So that's unrelated.
eksasol said:
It could be a hardbrick such as bootloader getting corrupted that happened to my Sony Xperia Play (now an expensive paper weight).
I assume you boot into download mode by holding the two volume buttons, then connect the cable? Have you tried on a different PC? It can also be the weak powered USB port on the PC. Also when you uninstall the Samsung driver, check the option to also delete USB driver and uninstall any drivers. Also which version of the driver are you using, have you tried version Samsung USB Driver 1.5.3? And the drivers from here: http://www.samsung.com/us/support/owners/product/SGH-T959ZKATMB#
Click to expand...
Click to collapse
Ok, faith momentarily restored. But I have questions:
-What do you mean when you say "check the option to also delete USB driver and uninstall any drivers"? I dont get such a prompt from right clicking on "unknown device" and selecting uninstall? Is there another method to uninstalling drivers?
-In the link attached, I can only find "Device(Install),USB Driver (Software) (ver.1.0)" not the 1.5.3 version mentioned. What am i doing wrong here? currently searching google for the 1.5.3 but finding nothing.
I get into download mode by holding volume- up + power. Have 2 PCs ( win xp and win 7) and a mac running mountain lion (but never ever have been able to get Heimdall to work, so devoting time to odin.)
Thank you for the time + help, guys, I really do appreciate it in the time of utter un-nerdness.
If the device is already installed it will have a check box that said "Delete the driver software for this device." If its unknown then obviously not. By "uninstall any driver", I mean uninstall any Android drivers you current have installed and reboot before you reinstall the new driver.
Although I doubt it will make a difference than the one I linked above, you can try the Samsung driver version 1.5.3: http://www.mediafire.com/?r0uc3h413qcy80z
If you did manage to get into download mode and see this: http://images.google.com/search?num=10&hl=en&site=&tbm=isch&source=hp&q=download+mode
Then it mean there is a very good chance you can restore the phone, if you can find a computer to recognize it and Odin to see a COM port.
I definitely think it would be worth the money to go buy an OEM USB cord. I can't tell you how many times I have seen this and a new USB is the fix.
sent from the depths of helly bean
OK guys...
My friend, who also owns a Vibrant, let me borrow the cable that came with the phone for the last 2 days.
Tried to make ODIN work on both PCs at home, gave Heimdall a shot on my mac, even hijacked a computer at work for the better part of the morning and freshly installed USB drivers 1.5.3 before connecting. All for nothing... “Unknown device” across the board....
At first I felt that with being able to get into download and have SOME kind of a reaction from connecting to PC had to be a good sign. Almost completely convinced that there is some unknown, unworkable hardware problem present. Definitely, officially, unremarkably out of ideas here.
Nothing is beautiful and everything hurts.
Last thoughts? Options at this point?
Also, tried One-click Unbrick tool on mac. I got a "is your phone plugged in, is it on download mode?" error, but anyone reading this down the line with a similar problem should check it out.
http://forum.xda-developers.com/showthread.php?p=15330252
Computer wont recognize my device anymore. I have downloaded every set of drivers from this forum, from the samsung website, I even tried downloading kies but it wouldnt recognize it either.
It worked before I did the following and now it doesnt.
First I rooted my phone with route 66 everything was going fine until I made the huge mistake (not knowing) and downloaded rom manager so that I could do a nandroid backup. Well as we all know now, you cant do that. So I got the deadly uellow verizon triangle saying unauthorized software bring it to the store. So I went through the xda forums and found the one that told me how to fix it. I used odin with the alternate restore and got it back up and running. So I wanted to go back and use adams one click unlock and root. I got everything downloaded and ready. I put my phone in developer mode and plugged it in. It starts trying to find the drivers and then it flips from debugger mode to media mode everytime. It starts seeing it as everything but a samsung phone. It says found camera and even cd rom but not the phone. I have read through everything and tried everything I could think of but I am at a loss. PLEASE HELP
Sent from my SCH-I605 using xda app-developers app
brandi1693 said:
Computer wont recognize my device anymore. I have downloaded every set of drivers from this forum, from the samsung website, I even tried downloading kies but it wouldnt recognize it either.
It worked before I did the following and now it doesnt.
First I rooted my phone with route 66 everything was going fine until I made the huge mistake (not knowing) and downloaded rom manager so that I could do a nandroid backup. Well as we all know now, you cant do that. So I got the deadly uellow verizon triangle saying unauthorized software bring it to the store. So I went through the xda forums and found the one that told me how to fix it. I used odin with the alternate restore and got it back up and running. So I wanted to go back and use adams one click unlock and root. I got everything downloaded and ready. I put my phone in developer mode and plugged it in. It starts trying to find the drivers and then it flips from debugger mode to media mode everytime. It starts seeing it as everything but a samsung phone. It says found camera and even cd rom but not the phone. I have read through everything and tried everything I could think of but I am at a loss. PLEASE HELP
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Turn off your phone, connect to your computer with the USB cord and turn back on your phone. It should start the drivers and connect to your device.
smalk said:
Turn off your phone, connect to your computer with the USB cord and turn back on your phone. It should start the drivers and connect to your device.
Click to expand...
Click to collapse
I tried that, it is still not seeing it like it is supposed to. I was able to get Odin to recognize it so that I could flash the rooted stock again but I can't get Casual Jailbreak to work. I'm not sure if it is because the drivers or not but I am guessing it has something to do with it. Every time I plug it in, it starts searching for drivers and then always switches from usb debugging mode to media mode. The checkmark is still in usb debugging but I don't think it actually is. You can watch it go from device as installer to media.
Are you using the driver install app (zadig i think its called) to install the heimdall driver on top of "gadget serial". Looking at your other post it seems like a driver issue. One thing ive noticed is, if odin can see the device then heimdalll cant and vice/versa. So if odin can see it you have the wrong driver, if you are infact installing the heimdall driver my second question is, does windows xp x64 use driver sig enforcement like win7 x64 does? if so you probably need to disable it. Just throwing my $0.02 out there.
Are you using the official USB cable? I had an aftermarket cable that had worked for months, then decided to quit working. It works with other devices just not the Note2. Changed to my original cable and all is well.
nunyazz said:
Are you using the official USB cable?
Click to expand...
Click to collapse
Also try plugging it in to the PC and not through a hub/keyboard/monitor port
Sent from my SCH-I605 using xda app-developers app
If it sees the device in the dumb verizon cd mode thing and ptp than it can see adb. Its not the cable. however i would try setting the usb debugging first than set it to camera mode. adb should still be able to pick it up
Thank you everyone for your help, I finally got the drivers working and the bootloader unlocked
brandi1693 said:
Thank you everyone for your help, I finally got the drivers working and the bootloader unlocked
Click to expand...
Click to collapse
How? Fixing to unlock my spanking new note also. I had the drivers issues late last night. When installing drivers through the Z app I never could get it to install Samsung usb drivers nor did I see serial gadget option. Running Windows Vista 64bit. I know I have Java.
Sent from my SCH-I605 using xda premium
Sorry for posting here as I'm a new comer!
I try to root/recovery my Verizon note2 I605 by following the instruction in post -- "[Jailbreak][Root][Recovery] CASUAL One-Click -- update 17MAR13:Windows/Linux" (http://forum.xda-developers.com/showthread.php?t=2118348).
After that, I can enter recovery menu and install customize rom. However, the Phone just supports two USB options: MTP and PTP and my PC (the same for another PC) does not recognize the phone anymore even I reinstall phone driver from Sumsung. Neither does CASUAL program recognize the phone.
Can anyone give me a hint about how to deal with this situation? Many Thanks in advance!
Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
im looking for the same answer too, my phone is stuck in the unauthorized software screen and i need to use odin to flash stock but i havent been able to do that because my windows 8 computer wont recognize my phone in download mode. I don't get whats going on with my drivers or how to fix it
almo40192 said:
im looking for the same answer too, my phone is stuck in the unauthorized software screen and i need to use odin to flash stock but i havent been able to do that because my windows 8 computer wont recognize my phone in download mode. I don't get whats going on with my drivers or how to fix it
Click to expand...
Click to collapse
Dont use win8, as far as I have heard its not supported.
This has happened to me both times I rooted my Verizon Note 2, what a pain in the ass. What I did to get it to work was to uninstall the samsung drivers then reinstall. This worked the first time but now it is not working on my replacement phone. This has happened before on my girlfriends s3, it pretty much wont recognize any samsung phones. I'm out of ideas, I think the USB installer that casual comes with is screwing up the drivers. I'm on Win7 btw
lzhshen said:
Sorry for posting here as I'm a new comer!
I try to root/recovery my Verizon note2 I605 by following the instruction in post -- "[Jailbreak][Root][Recovery] CASUAL One-Click -- update 17MAR13:Windows/Linux" (http://forum.xda-developers.com/showthread.php?t=2118348).
After that, I can enter recovery menu and install customize rom. However, the Phone just supports two USB options: MTP and PTP and my PC (the same for another PC) does not recognize the phone anymore even I reinstall phone driver from Sumsung. Neither does CASUAL program recognize the phone.
Can anyone give me a hint about how to deal with this situation? Many Thanks in advance!
Click to expand...
Click to collapse
USB debugging on? Also I would uninstall the drivers and then reinstall manually..
Hi guys,
I'm new to this forum. I've got a Samsung i777 on android 2.3.6 kernel 2.6.35.7 build number gingerbread.uckk6
I've recently bought this phone off ebay
My phone does not get detected by windows 7 or Macbook. I've tried changing the USB flex cable with I9100 v2.3 but still no luck.
When I connect USB port it beeps and shows mtp-initialization/mtp-connected on the phone but it is not shown on windows. It says USB cannot recognise the device. I've got a s3 and ideos x3 both of them are detected.
I've installed kies 3 on my laptop.
I had to swtich off the wifi on the phone because it consumes a lot of battery, I think it is because of the android version I'm using!
I want to root the phone and unlock it!!
Any help is appreciated!
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
I'm guessing the problem is the Samsung drivers you have installed for the s3. Try uninstalling those and installing the correct drivers for s2.
Sent from my GT-p511x
you can check this thread for driver
http://forum.xda-developers.com/showthread.php?t=961956
You most likely need a new cable. Happened to me once! Could be the drivers but I HIGHLY recommend just trying a new USB cable.
Thank you guys for all your help really appreciate it!
I have tried all the steps mentioned above tried to uninstall all the previous drivers I had and installed the new driver as mentioned in the above link but no luck
I tried it on a friends computer with a different cable still it shows the USB device is not recognised!!
kshah1606 said:
Thank you guys for all your help really appreciate it!
I have tried all the steps mentioned above tried to uninstall all the previous drivers I had and installed the new driver as mentioned in the above link but no luck
I tried it on a friends computer with a different cable still it shows the USB device is not recognised!!
Click to expand...
Click to collapse
Did you install another ROM? It might help to Wipe system, Data, ETC! it appears to be a software problem. Or at least my guess is the ROM your using.
The Galaxy phones all use the same USB drivers whether it's an S2, S3, S4, etc., so if the installed drivers were working for your S3, it's unlikely to be a driver issue.
Can you boot it into download mode? If you happen to have a USB jig, that's the easiest. Otherwise, power off the phone, unplug the USB cable, hold Vol +/Vol-, then plug in the USB cable. It should go into ODIN download mode. See if Windows detects the phone that way. If so, it very well could be something weird with the OS installed (although it appears to be stock).
If you can get into download mode, you can flash a stock kernel to make sure you are starting fresh. A good file repository is found here. I recommend the stock UCKH7 image I777_UCKH7_OCD_No_BL.7z (you'll also get root).
And yes, the UCKK6 release had a serious bug related to the wifi that could drain your battery. Best to go with UCKH7.
You could also download an app that allows you to enter download mode.
SighIsAnonymous said:
Did you install another ROM? It might help to Wipe system, Data, ETC! it appears to be a software problem. Or at least my guess is the ROM your using.
Click to expand...
Click to collapse
How would I be able to change the ROM if the phone is not detected
jpasher said:
The Galaxy phones all use the same USB drivers whether it's an S2, S3, S4, etc., so if the installed drivers were working for your S3, it's unlikely to be a driver issue.
Can you boot it into download mode? If you happen to have a USB jig, that's the easiest. Otherwise, power off the phone, unplug the USB cable, hold Vol +/Vol-, then plug in the USB cable. It should go into ODIN download mode. See if Windows detects the phone that way. If so, it very well could be something weird with the OS installed (although it appears to be stock).
If you can get into download mode, you can flash a stock kernel to make sure you are starting fresh. A good file repository is found here. I recommend the stock UCKH7 image I777_UCKH7_OCD_No_BL.7z (you'll also get root).
And yes, the UCKK6 release had a serious bug related to the wifi that could drain your battery. Best to go with UCKH7.
Click to expand...
Click to collapse
I was able to boot to download mode by holding the vol +/- key and then plugging in the USB cable but there is no movement from the computer it doesn't make a sound nor does it detect. I tried restarting the phone then I get a notification on windows that USB device not recognised!
Yes I guess this rom is useless, if the wifi is switched on then battery would not even last 6 hrs!
kshah1606 said:
I was able to boot to download mode by holding the vol +/- key and then plugging in the USB cable but there is no movement from the computer it doesn't make a sound nor does it detect. I tried restarting the phone then I get a notification on windows that USB device not recognised!
Click to expand...
Click to collapse
Are you saying to get a balloon notification in the tray that says the USB device is not recognized? A possible reason for that is a faulty USB cable or USB port (funny enough, I actually got that message last night when I was playing around with my Captivate, and switching USB ports made it work). I know you said you've tried other computers an another USB cable, but that's about my only idea. Maybe there's some debris inside the connector that's messing up the connection.
When you say you changed the "USB flex cable", are you talking about the internal connector and board inside the phone? If so, perhaps the I777 connector board is actually a little different than the I9100 board and causing a compatibility issue.
The bug in UCKK6 related to wifi didn't affect everybody, but it definitely affected a lot of people (based upon reports here).
kshah1606 said:
How would I be able to change the ROM if the phone is not detected
Click to expand...
Click to collapse
If you have an SD card, you can download another ROM on that SD card from your computer and then you can install custom recovery (CWM) and then install the ROM from SD card.
kshah1606 said:
How would I be able to change the ROM if the phone is not detected
Click to expand...
Click to collapse
First ill run you through the problem I had. Just for reference did you use Mr. Cooks script before flashing Cyanogenmod 11? One of his scripts for cleaning before flashing, actually deletes a certain file, not to keen on which one. What it results in though is not being able to flash OF ROMS and some certain custom ROMS! So id recommend alliance's ROM! As for the "Getting the ROM on your device, you could put the ROM on your SD though recovery "Mount and storage/Mount mass storage/" or just use a micro sd card adapter and move it on there that way.
Thanks for your reply. Would you mind sending me the link on how to do that step by step as mentioned I'm new to Samsung phones and also this forum.
Your help is appreciated
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
kshah1606 said:
Thanks for your reply. Would you mind sending me the link on how to do that step by step as mentioned I'm new to Samsung phones and also this forum.
Click to expand...
Click to collapse
What state is your phone currently in? Is it still not detected by the computer? You are still on 2.3.6, correct?
If it's still not being detected by your computer, I'm not sure if you can flash anything needed using the stock recovery. I know that when I flashed stock JB, I was able to boot into stock recovery and directly apply the standard CWM update file here. It will give boot into a temporary CWM that should allow you to flash other ZIP files (like a ROM), although I had trouble doing that (so I ended up flashing the AJK_v4.9_NoSwap.zip kernel using the MobileOdin android app, which gave a permanent CWM recovery).
I'm not sure if this same process works with the 2.3.6 recovery. However, in order to get the stock recovery to see the internal SD card, I had to run adb shell commands to mount the partition (meaning I had to have a working connection from the computer).
Solved!!!
HI Guys,
Many many thanks for all your responses!
I have changed the USB flex cable again to an older version v2.2 and my phone is currently being detected by kies! So relieved thanks a lot for all your help..now the rooting begins!!:laugh: