Is it possible to use the froyobread themes on floyo?
Would it work?
And what is the difference between 0.25 and 0.30 any thing new?
There must have been some errors in Floyo 0.25, and in 0.30, he obviously fixed them, because he says it´s the final Floyo release from him.
For further information you´ll better ask racht himself.
Oh, I forgot to tell you that you can only install themes to this ROM if they are compatible for it, that means they have to be modified to work with it, but here you´ll also have to ask racht
codfreak said:
Oh, I forgot to tell you that you can only install themes to this ROM if they are compatible for it, that means they have to be modified to work with it, but here you´ll also have to ask racht
Click to expand...
Click to collapse
thx just liked one theme tht worked for froyobread and wanted it 2 work for floyo.
Hamzai82 said:
Is it possible to use the froyobread themes on floyo?
Would it work?
And what is the difference between 0.25 and 0.30 any thing new?
Click to expand...
Click to collapse
0.30 doesnt have edge glow effect
Related
This thread will contain my port from FreeX10 for the big x10 by zdzihu.
Status:
Creating vendor setup, man, this takes ages!
Next:
Compile
Fix basic drivers (like my Sense release)
Share
The Work's
Nothing, atm
The Won't 's:
Booting
Camera
Update:
I've made a script to install xrecovery, root and fix busybox after updating to 2.0.2.A.0.24
I have packed it into an exe for your ease. Of course I know you'll want a virusscan so I've added links on the bottom. It's just a extracting sfx archive so if you have knowledge with that you can just extract it and see, if you don't trust me
x10 Mini Pro VirusScan @ virusscan.jotti.org
x10 Mini VirusScan @ virusscan.jotti.org
I'll be more and happy to assist in the port for mini pro. only thing is i have exams until mid of feburary. but i think i'll be able to make some free time and help!
which tool chain do we need? codesourcery?
Mikevhl said:
Hello, I have a minor issue in porting over FreeX10.
Namely the camera, it is really being a pain in the {nasty word goes here}
the compiling process keeps on pooping me out with errors related to libcamera.so.
the libcamera.so is looking for android::CameraParameters::ORIENTATION, android::CameraParameters::ORIENTATION_LANDSCAPE and android::CameraParameters::ORIENTATION_PORTRAIT
which aren't devined in the AOSP source and are something Sony Ericsson has added in.
I tried putting in libcameraservice.so, libfacedetection.so and libfacedetectjnitest.so, but it's still complaining about resources.
Anyone wants to team up and help me port?
Greetings
Click to expand...
Click to collapse
Here's the whole change: https://github.com/xian1243/android_frameworks_base/commit/8e309093776b259a23077feb095aee082f68a2f8
But still, I suggest to compile with USE_CAMERA_STUB := true and worry about it later
Cheers,
z
Can i be like beta tester when ur done?
zdzihu said:
Here's the whole change: https://github.com/xian1243/android_frameworks_base/commit/8e309093776b259a23077feb095aee082f68a2f8
But still, I suggest to compile with USE_CAMERA_STUB := true and worry about it later
Cheers,
z
Click to expand...
Click to collapse
Thanks, I'll take a look at that tomorrow
maxaan said:
Can i be like beta tester when ur done?
i know i only have 2 posts but i know android and know some basic stuff about adb and i have a rooted u20i with xRecovery (Thank you so much Zdzihu!)
Ask if u need to know something more...
Click to expand...
Click to collapse
Sure, I'll put the rom online as soon as I have it booting, in pre-alpha stage that is.
Don't expect too much though, by 'booting' I mean that you get to the launcher.
Camera won't work for sure for the time being, but other than that I don't expect too many issues.
Thanks for your interest!
Mikevhl said:
Sure, I'll put the rom online as soon as I have it booting, in pre-alpha stage that is.
Don't expect too much though, by 'booting' I mean that you get to the launcher.
Camera won't work for sure for the time being, but other than that I don't expect too many issues.
Thanks for your interest!
Click to expand...
Click to collapse
Will you put it up in this thread or somwhere else?
Sounds great but Is this only going to be for the Mini
If you want to - I could just be the alpha and beta tester.
Way to go pal!
maxaan said:
Will you put it up in this thread or somwhere else?
Click to expand...
Click to collapse
I'll post it in the first post, it'll probably be sometime later today.
Manny- said:
Sounds great but Is this only going to be for the Mini
Click to expand...
Click to collapse
Pretty easy to port this over to the Mini once I got this running, but the build I'm working on right now is for the x10 Mini Pro.
zyker said:
Way to go pal!
Click to expand...
Click to collapse
Thank you,
but It'll take a long time before I get this to run smoothly
ok its working .. whats next?
Mikevhl said:
This thread will contain my port from FreeX10 for the big x10 by zdzihu.
Mind testing my port from xRecovery-installer? I've attached it.
Status:
Redownloading the Repo.
Commiting changes released by zdzihu from his Github repo.
Compiling the AOSP using zdzihu's changes.
Next:
Test on device.
Help Needed with:
Nothing at the moment, pre-alpha will probably be up later today.
Click to expand...
Click to collapse
Is there a xRecovery 0.2?
So Nice !
Waiting for this
maxaan said:
Is there a xRecovery 0.2?
Click to expand...
Click to collapse
This is a port of the xRecovery installer by zoz33.
The big x10 which the original installer is from is using xRecovery 0.2 but I replaced the files with our xRecovery 0.1
So this is basically an "easy install mode" for our xRecovery 0.1
Mikevhl said:
This is a port of the xRecovery installer by zoz33.
The big x10 which the original installer is from is using xRecovery 0.2 but I replaced the files with our xRecovery 0.1
So this is basically an "easy install mode" for our xRecovery 0.1
Click to expand...
Click to collapse
Ok. When will you upload the rom? Im so excited!!
Next:
Uploading, any preferences for mirrors?
Mediafire
Please put up some screens ASAP then, + info on whats working and whats not.
Anyone thought of compiling a 2.3 ROM for the X10 mini pro.
Or is it not possible yet? if so, why ? =)
I just installed beta4. And I just knew of cyanogenmod, is it a must, will it make a big difference?
And does installing the theme which include cyanogenmod settings equal the same as cyanogenmod ROM?
gohwh1 said:
I just installed beta4. And I just knew of cyanogenmod, is it a must, will it make a big difference?
And does installing the theme which include cyanogenmod settings equal the same as cyanogenmod ROM?
Click to expand...
Click to collapse
for me yes (more stable) but that`s just my opinion.
is the same as....6.1.1 LOL
http://forum.xda-developers.com/showthread.php?t=936023
http://forum.xda-developers.com/showthread.php?t=941470
Thank you. So meaning I can just install freex10 beta4 and install greenflow theme?
gohwh1 said:
Thank you. So meaning I can just install freex10 beta4 and install greenflow theme?
Click to expand...
Click to collapse
now you make me stupefied
you ask: will it make a big difference (you have installed freex)
and now you ask me if you can install freex?!
decide what you want
Install them paralel, then decide.
Honeycomb theme seems to be very beautiful...
The theme can be installed via xRecovery.
For the theme and screenshots please check the attachments.
Choose the theme from Theme Chooser.
Enjoy!
Warning! This will brick your Android 2.1 Build 2.1.1.A.0.6!
Please click Thanks button if you like it.
Cheers!
Hi!Is this works on Android 2.1 Build 2.1.1.A.0.6?
ummm......it actually does not work on x8....we need to recompile the theme and make it compatible with our phone....
CM7.0 RC1 DEVELOPMENT v003
I've tested and it works for CM7.0 RC1 DEVELOPMENT v003, just download the .apk for Theme Chooser from here.
Thanks to ZduneX25.
2.1.1.A.0.6Test fail
SunShine522 said:
2.1.1.A.0.6Test fail
Click to expand...
Click to collapse
i warned that it will NOT work on 2.1!
Ha ha, but the boot screen but successful installed, it is so strange!!!
man，I love your works for X8
l373872514 said:
man，I love your works for X8
Click to expand...
Click to collapse
thanks man!
then y dont u click the thanks button to show me ur wishes!
Doesn't work, hangs at boot
Will it work on 2.2.1 CM Floyo v0.10 ??
can you made this for 2.1.1.A.0.6 ????
fatexo said:
Will it work on 2.2.1 CM Floyo v0.10 ??
Click to expand...
Click to collapse
no - Floyo is CM6 not CM7
does it work for android 1.6?
Warning! This will brick your Android 2.1 Build 2.1.1.A.0.6!
bad
？
Warning! This will brick your Android 2.1 Build 2.1.1.A.0.6!
bad
？
Does it work on rachts CM7-Legend ROM?
Roland
How long should it take the phone to boot after installing this theme. I've installed it on a freshly Flashed CM7_RC1_X8_005 and it freezes on the Honeycomb boot screen?
Roland
Like me, it's nice
not working on cm7 last version by racht
Disclaimer:
the usual stuff i am not responsible if you brick your device. By any means you do it knowing there still might be a possiblity you might get stuck or brick you device
Click to expand...
Click to collapse
Hey guys,
this is a Port of the recently in released in China.
This ROM can still be rooted by SuperOneClick root. Xrecovery comes preinstalled though. Do not forget that the W8 still comes with Android 2.1 still its nice as some of the stuff was updated. So if you want to update you existing 2.1 this might be a great choice.
You can remove any app you don't want from the zip or copy the ones from 2.1 to the zip you need as well.
Please Backup your build.prop before flashing so you can revert back to original state
Links
W8 Port v1.0 Please read instructions / This is Android Eclair (2.1)
Instructions:
place on sdcard
boot to xrecovery
install as custom zip
if you come from other custom rom (higher than android 2.1) do a factory reset BEFORE flashing the zip file
reboot (like stock SE firmware for pro) takes awfully long
The Works:
Everything
The Not Works
Nothing found so far
Bugs:
Some stuff is not ldpi like the widgets but it works pretty good.
Nice android 2.1 right?
did you change anything from the Original rom?
that was fast :b
Screenshots also pending?
avlopp said:
Screenshots also pending?
Click to expand...
Click to collapse
Done xD
he is finishing the upload :b lets see what comes from this walkman series
PTGamer said:
Done xD
he is finishing the upload :b lets see what comes from this walkman series
Click to expand...
Click to collapse
i only edited to make it work with mini and also deleted chinese input method and changed suquashi framework so otherwise we couldnt really use the hardware keyboard. if somebody need chinese i need the mini pro chinese input method. which i didnt have. now we are at least able to use hardware keyboard and the stock t9 input method from sony mini pro stock rom.
links up and running
Hey Slade, i'm sure this is many people's request as well, can you please post just the W8 Music player to apps and themes section? we dont wanna download the whole rom just for the music player cheers, great port btw
i tried the musicplayer but it has dependencies to framework and other stuff i guess. maybe someone in the mood to port just the app? maybe myth999 ?
slade87 said:
i tried the musicplayer but it has dependencies to framework and other stuff i guess. maybe someone in the mood to port just the app? maybe myth999 ?
Click to expand...
Click to collapse
hehe that would be great its a walkman fone so it has more function than the default one on x10 mp 2.1 rite ?
EDIT: I meant the app has more function rite?
Hi Slade,
Sorry for my ignorance but what is the difference between this ROM and the original SE ROM 2.1 for minipro?
Thanks
After boot up it just stays and nothing hapens and it says (No Service) when sliding Status Bar down.
leminhnguyen0703 said:
hehe that would be great its a walkman fone so it has more function than the default one on x10 mp 2.1 rite ?
EDIT: I meant the app has more function rite?
Click to expand...
Click to collapse
i ve try the walkman music player in that rom that i grab from x8 custom rom,..actually nothing special bout it..its just the same with miui music player..the difference was just the colour..its orange
DanielFran said:
Hi Slade,
Sorry for my ignorance but what is the difference between this ROM and the original SE ROM 2.1 for minipro?
Thanks
Click to expand...
Click to collapse
this is based on the newest 2.1 sources and you have "S.E walkman".
Working here.
Only one question
The W8 has a 3.2 Mpix Hardware camera ! So this ROM allows only 3.2Mpix picture or 5Mpix ?
I'm not going to use this ROM, I prefer your amazing Froyo ROm
EDIT: downloading the ROM now
hmmm.. kinda miss 2.1.... downloading too ^^
Would surely attempt to port the player
Just wait 6 days
Sent from my U20i using XDA Premium App
myth999 said:
Would surely attempt to port the player
Just wait 6 days
Sent from my U20i using XDA Premium App
Click to expand...
Click to collapse
I wait, heheheehe
Plancton.fr said:
Only one question
The W8 has a 3.2 Mpix Hardware camera ! So this ROM allows only 3.2Mpix picture or 5Mpix ?
I'm not going to use this ROM, I prefer your amazing Froyo ROm
Click to expand...
Click to collapse
Camera dont work here, but im trying to fix that, and for taking 5mp photos.
SONYBREAD V1.1
I've cleared dalwik cache,battery stats,,full wipe....and installed a fresh one...but after installation stucked at boot logo screen....ive using CM7 15.0
Flash your phone to latest firmware 2.1.1.C.0.0
paul-xxx said:
Flash your phone to latest firmware 2.1.1.C.0.0
Click to expand...
Click to collapse
thank u paulxxx...u updated ur thread with hot fix......very good rom,,,fast stable.....but incoming or outgoing call number not visible while calling...ya i know u r working on it...but i think it is very important....
anyway good one..loved it after a long time
Stuck in boot loop solution for firmware 2.1.1.A.0.6
Is there any way for installing this rom over 2.1.1.A.0.6 and not get into bootloop...............
I tried over 2.1.1.A.0.6 but got stuck in bootloop.......
nokiasatyam said:
Is there any way for installing this rom over 2.1.1.A.0.6 and not get into bootloop...............
I tried over 2.1.1.A.0.6 but got stuck in bootloop.......
Click to expand...
Click to collapse
ya he provided a hotfix to fix this.....install it through xrecovery after a fresh sonybread install... make sure u clean battery stats,dalwik cache,full wipe....
Hi All!
I have frozen development of the project, because of pummakitto. pummakitto has copied all my resources in the rom, now I am forced to do another.
pummakitto confirms that has made all. And copied nothing from mine rum! But pummakitto never would make my design!
paul-xxx said:
Hi All!
I have frozen development of the project, because of pummakitto. pummakitto has copied all my resources in the rom, now I am forced to do another.
pummakitto confirms that has made all. And copied nothing from mine rum! But pummakitto never would make my design!
Click to expand...
Click to collapse
your rom is very good paulxxx....don't leave ur project...and who is pummakitto..we need SONYBREAD developement from u thats it....
I'm recompiles all resources and begin close beta test.. As beta testing will end, I unfreeze.
i would like a beta tester pls
paul-xxx said:
I'm recompiles all resources and begin close beta test.. As beta testing will end, I unfreeze.
Click to expand...
Click to collapse
usually i install every rom in this XDA for mini pro....and i used to change every rom within two days of usuage but....im using ur rom since 1week and im very much satisfied with this and i like u to solve some bugs before u quit...
and very much thanks to u for this wonderful rom
by B-PAUL (Paul-XXX).
Wait!
9291514329, rename [Q] SONYBREAD V1.1 is stuck in bootlapsing in mini pro to [Q] SonyBread
Hii
Paul-xxx
I saw ur post in andread 2.3.4 ROM that " u installed it and it works"
can you say me how did you get Andread Rom working, can tell me the steps of installation for not getting stuck on SE logo...........
By the way with the Hotfix i successfully installed ur sonybread ROM and its very stable..............keep up the work
nokiasatyam said:
Paul-xxx
I saw ur post in andread 2.3.4 ROM that " u installed it and it works"
can you say me how did you get Andread Rom working, can tell me the steps of installation for not getting stuck on SE logo...........
By the way with the Hotfix i successfully installed ur sonybread ROM and its very stable..............keep up the work
Click to expand...
Click to collapse
did u try the same hotfix for andread rom...just try it once and check it.....
Hi! In next rom: radio to be worked! and not more bugs. Only one bug, camera shoting in VGA (0,3 Mpx)
paul-xxx said:
Hi! In next rom: radio to be worked! and not more bugs. Only one bug, camera shoting in VGA (0,3 Mpx)
Click to expand...
Click to collapse
u mean "except CAMERA everything will work fine in next rom" then it will be great.....and try to apply those in a HOTFIX that will be very helpful
paul-xxx said:
Hi All!
I have frozen development of the project, because of pummakitto. pummakitto has copied all my resources in the rom, now I am forced to do another.
pummakitto confirms that has made all. And copied nothing from mine rum! But pummakitto never would make my design!
Click to expand...
Click to collapse
dude who / what is this pummakitto????
love the idea of your rom... am trying it out now. Will post feedback once I do...
As the moderator will understand, the theme will be continued! I hope for his understanding
Hiii paul i am using your sonybread ROM its really cool............
and i am eagerly waiting for ur update .........try get everything into a blue tinge colour just like stock...........
Thank u for ur great ROM
Updated!
http://forum.xda-developers.com/showthread.php?t=1151499