FreeXperia PROJECT
(Unlocked bootloader only)
We suport following accesorries
LIVEVIEW http://www.sonyericsson.com/cws/products/accessories/overview/liveviewmicrodisplay?cc=gb&lc=en#a
LIVEWATCH http://www.sonyericsson.com/cws/products/accessories/overview/smartwatch?cc=gb&lc=en
If you want to contribute to FreeXperia Project you can access it on git
https://github.com/freexperia
if you want to support our work you can donate
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=THUJZQB2U5PNC
Our team is not responsable of any damage that you or you phone will suffer by using our work
CM7 PROGRESS
FIXED
GSM - voice and data
SENSORS - from source
WIFI - from source
FM - from source (not working for now)
LIGHTS - from source
VIDEO - from source
AUDIO - from source
GPS - from source
Gralloc - from source
HOTSPOT - from source
BT - precompiled
Live View - UGLY but SMART Accesory
Live Watch - usefull, nice, smart
RECOVERY - almost ready
3D - precompiled
CAMERA - precompiled
WORK IN PROGRESS
HDMI - work in progress (for suported devices)
FM - work in progress
ANT+ - precompiled and source
BUGTRAKER
http://code.google.com/p/freexperia/
GSM ONLY
DOWNLOAD
Look in my signature !
from now numbering will indicate week number and if is possible new rom will be out every monday with latest progress
please don't mirror (we want to have download conunt)
HOWTO FLASH ROM
to flash cm7 rom you have to take 3 steps (after unpacking the 7z archive)
step 1 - copy update.zip to sdcard
step 2 - flash new kernel (always use the kernel provided in CM7 / it is incompatible with stock ROM)
ON PC - run fastboot flash boot boot.img (an black window will open and will stay open untill kernel is flashed)
ON PHONE - put phone in fastboot mode (power off then press lower right key and plug usb cable) and phone LED will light BLUE
step 3 - when phone is booting (first 5 seconds) press volume key several times to enter recovery and choose apply update from sdcard
WARNING - if you used another rom (stock or custom) you have to wipe data or device will not boot
CDMA ONLY
DOWNLOAD
Look in my signature !
please don't mirror (we want to have download conunt)
HOWTO
to flash cm7 rom you have to take 3 steps (after unpacking the 7z archive)
step 1 - copy update.zip to sdcard
step 2 - flash new kernel (always use the kernel provided in CM7 / it is incompatible with stock ROM)
ON PC - run fastboot flash boot boot.img (an black window will open and will stay open untill kernel is flashed)
ON PHONE - put phone in fastboot mode (power off then press lower right key and plug usb cable) and phone LED will light BLUE
step 3 - when phone is booting (first 5 seconds) press volume key several times to enter recovery and choose apply update from sdcard
WARNING - if you used another rom (stock or custom) you have to wipe data or device will not boot
Take all you need, we're ready!
Yay.
Sent from my iPad using Tapatalk
Edit: If the developers need this post, they can have it. Just PM a Mod.
Edit 2: I can't believe this post is still here 6 months later.
reserved
EDIT: hm, now i have 2 posts above me, that was not the intention :/
Sent from my LT15i using Tapatalk
Downloading... nice!
There's nothing at all relating to the Play there in the repo yet.
zerojay said:
There's nothing at all relating to the Play there in the repo yet.
Click to expand...
Click to collapse
Easy... it just begun... you can also try new kernel: http://forum.xda-developers.com/showthread.php?t=1128272
while waiting for CM7 development...
zerojay said:
There's nothing at all relating to the Play there in the repo yet.
Click to expand...
Click to collapse
Well, start working on it then
I know, I'm just saying that there are people who are going to see the title of the thread and assume that there's something to try and end up flashing an Arc build or something. When I was helping with the Galaxy S CM7 builds, we saw it all the time.
YAY!
When did the work begin? Any beta's (or alpha's) for us to try?
I'll test, count me in
Nhialor said:
YAY!
When did the work begin? Any beta's (or alpha's) for us to try?
I'll test, count me in
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1128272
Part of FreeXperia project as well
welcome to the play jerpelea
i greatfull for all your input on the xperia x10 when i had one of those
hopefully u and blagus and bin4ry and other devs can do the same for this phone like u did for the x10
thnx for joining us
Bin4ry said:
reserved
EDIT: hm, now i have 2 posts above me, that was not the intention :/
Sent from my LT15i using Tapatalk
Click to expand...
Click to collapse
By all means, contact a mod and ask him to delete our posts. I think yours will be much more meaningful than ours.
hy all
we will release this rom only after we will fix 3d on arc
otherwise this rom will be useless on an play phone
jerpelea said:
hy all
we will release this rom only after we will fix 3d on arc
otherwise this rom will be useless on an play phone
Click to expand...
Click to collapse
Sick guys, can't freaking wait!! but I will ofc ...
What about all of us with locked bootloaders? do we have any hope other than root?
FK1983 said:
What about all of us with locked bootloaders? do we have any hope other than root?
Click to expand...
Click to collapse
Testing in progress... I should be close to the solution for unlock bootloader
Related
Q:What is BlendMIUI Speed-Porting Software For XPERIA 2011
Ans:This is a short program trying to help you guys to build your own BlendMIUI rom for Xperia 2011 devices in just few minutes.
Q:How to use it?
Unlock Bootloader first!
1.Download BMSPS(BlendMIUI Speed-Porting Software) then unpack it to anywhere you like(Windows environment).Btw,you should install JAVA SE JRE first or it won't works because it needs JAVA environment to sign the rom.You can goto oracle.com/java to download the latest Java SE JRE.
2.Download latest MIUI rom for Desire HD from miui.us(or anywhere you want).
3.Rename the rom you just downloaded as MIUI.zip then put it into /MIUI_DHD_ROM directory.(Do not rename it as MIUI.zip.zip!)
4.Run BMSPS_luancher.exe to start.
5.Do as follows then it will automatically create update.zip under the BMSPS directory.
Then you have two choices:
=>Help youself:
6.Put the update.zip rom to your SD-card.
7.Flash BlendMIUI kernel(I have put it into \BlendMIUI-kernel directory) or DooMKernel for MIUI.
8.Use CWM-recovery to flash the update.zip rom.
=>Use Auto-Flash Function
You don't need to do anything on your phone,it will help you to do all works automatically and boot into the new system!
Features:
1.Support Devices: Xperia Arc,Xperia Arc S,Xperia NEO,Xperia NEO V,Xperia Ray,Xperia Play.
2.Latest CM7.2.0 rebuilted sources as base.
3.Automatically port MIUI for your device then create unpdate.zip and sign the rom to let you flash it into your device directly.
4.Your choice Function (addons)
5.Fully working Auto-Flash Function
P.S: CM7 sources and kernel for XPERIA RAY are come from bheremans.
Changelog for Version 02:
1.Add moded Packageinstall to let you chose where you would like to install your apps including SD-card.
2.Fixed function to remind you to install java-jre if update.zip is not created.
3.Small changes.
Changelog for Version 03:
1.Fixed PackageInstaller and Torch FC problem when using the ROM from www.miui.com as base.
2.Automatically recognize MIUI version (Depends on the MIUI rom you use) and change Build version for porting rom.
3.Add "Your Choice" function to help you customize your own BlendMIUI rom(BlendUI,DSPManager,Tweaks,Audios from SE).
4.[For DEVs] Whole-New Source code:More easy to read,more easy to add new language(I mean the BMSPS itself) and new functions.
Changelog for Version 04:
1.Disable echoing information for better display.
2.Fixes and improve performance of BMSPS.
3.Add "Auto-Flash" function to help you flash BlendMIUI automatically
Changelog for Version 04.3:
1.Add Xperia Ray ST18i support(All sources for Xperia Ray are come from bheremans).
2.Fixed Auto-Flash function.
3.Fixed ADB Detective bug which cause the software stuck at entering into Auto-Flash function when you input "yes".
Changelog for Version 04.7:
1.Add Xperia Neo V support.
2.Fully working Auto-Flash function (You don't need to do anything on your phone now until it boots into the new system.BMSPS will help you to do everything automatically.)
3.Some small changes
Changelog for Version 05.0:
1.Add Xperia Play R800i support.
2.Add confirm function to avoid error selection.
WARNING:
1.This is not an update-package and you'd better delete all old files if you have installed early version of BMSPS.
2.Make sure you have unlocked bootloader before using this tool.
3.Baseband 56 is highly recommanded(based on .42 official firmware).
Download links:
BMSPS V05.0: http://www.mediafire.com/?4c5rkkcns4abf3k
Latest Source Code @ github.com/JasonStein
[Credit]
Bheremans,Eamars,FXP,DooMloRd,enzo...
Please report bugs with screenshots!
No way! That was fast thank you so much!
Sent from my R800i using xda premium
Gah! R800x cheated out again!
Sent from my R800x
Feel a little left out in the cold for the r800x :-(
sent from my s.e.x play u jelly?
MAster224 said:
Feel a little left out in the cold for the r800x :-(
sent from my s.e.x play u jelly?
Click to expand...
Click to collapse
also works on r800x , I'm sure but may have bugs since r800x is an CDMA phone.
My friend told me it works fine on Xperia Play and AutoFlash function works correctly.
What should you do before using this tool to port and flash MIUI rom:
1.Install fastboot driver.
2.Flash .42 official firmware(if you are already on baseband 56 you don't need to flash it again)
3.Turn on your phone and connect it to your PC using usb cable with USB-Storage Mode closed.
Then:
Use BMSPS to port MIUI rom from miui.us and use Auto-Flash function to let software help you flash the kernel and rom automatically.
(You'd better chose wipe data and cache when BMSPS ask you or it may not boot correctly)
something is wrong with mediafire...
EDIT: Problem is gone. Maybe just some server issues.
What works/doesn't work
Sent from my R800i using XDA App
Touchpads work?
Sent from my R800i using Tapatalk
can someone try it? what goes wrong it's all automatic.
Then post what works and what does not work
i will test it but my play is in service :'(
i'm going to test it now.
can someone make a list with what i must to test?
sorry for my bad English
This did not work for me, the tool just crashs, but i think it is a promblem of my pc. I have the Beta Build wich JasonStein created and there are the only real bugs bluetooth and touchpads. It should be very similar with this.
IE-coRe said:
This did not work for me, the tool just crashs, but i think it is a promblem of my pc. I have the Beta Build wich JasonStein created and there are the only real bugs bluetooth and touchpads. It should be very similar with this.
Click to expand...
Click to collapse
Looks like I will stick with stock.
The only reason I won't use a custom Rom is because most of them have reported issues with the touchscreens.
Sent from my R800i using Tapatalk
@KeiranFTW: The Touchscreen issues ppl talk about aren't noticeable at all.
It's just like 2-3 pixles that don't register (from all angles, as far as i know)..
Though i wonder why it's not fixed, yet. :O
HearthC0re said:
@KeiranFTW: The Touchscreen issues ppl talk about aren't noticeable at all.
It's just like 2-3 pixles that don't register (from all angles, as far as i know)..
Though i wonder why it's not fixed, yet. :O
Click to expand...
Click to collapse
Was on my phone when I posted that so it autocorrected "touchpads" to "touchscreen" LoL.
Didn't know there was any touchscreen issues but without the touchpad some games I find hard to play.
Just installed on my r800i. Wifi, Camera, Flash and buttons work fine. Bluetooth does not start. I have not tested touchpads yet.
Ciao
Andrea
Hi all,
Please someone can help me how i can add a language pack to BMSPS_LANGUAGE folder????
and where i can find him??
thanks in advance
Main things to test:
1. WIFI
2. Bluetooth
3. Camera
4. Touchpads
5. Data
Dont forget to test Camera in Barcode Scanners
wifi data camera torch working
touchpads and bluetooth not.
The kernel from DooMLoRD is from the fxp 045 (or something) that doesn't have bluetooth and touchpads.
If DooMLoRD have time he will change it and maybe it is working than
I am sorry to announce that I will stop the development for CM9 ,Thanks all for using and sharing your feedback.
NOTE: Its Not My Rom Its Quoted From This Thread & I Edited scripts And Now Its Working On Neo V (Tested In Mine Neo V) : http://forum.xda-developers.com/showthread.php?t=1445844
NOTE: Since i am not allowed to provide the final flashable CM9.zip i wont proved it , & flash this at your own risk
Installation instructions:
1. Download FXP107 from http://uploaded.to/file/30f2pj59/from/ily4bk
2. Download SCRIPTS.ZIP file & extract updater-script & build.prop files.
3. open FXP054 zip file , you will see two folders(META-INF & system) & boot.img (kernel) in it.
4. Replacing Updater-script
a. open the nightly file what you've downloaded 'FXP107' using winrar
b. go to this folder path ' META-INF/com/google/android/'
c. you will see updater-script file now Replace it with the file extracted from
5. Replacing build.prop
a. open the same nightly file which you've edited before 'FXP107' using winrar
b. go to this folder path ' system/'
c. you will see build.prop file at the bottom now Replace it with the file extracted
6. Installing CM9 Kernel
a. extract the boot.img file provided in the zip to the fastboot folder in your PC
b. power off device , plug in phone usb in fastboot mode & use this command in CMD & flash the kernel
fastboot flash boot boot.img
3. power on device & goto CWM Recovery & wipe factory settings , wipe cache & install the zip you've edited
4. reboot & enjoy
5. Flash the ICS GAPPS From
http://www.megaupload.com/?d=NK6PS53P
OR http://www.multiupload.com/HWU4IJO1M5
OR http://www.mediafire.com/?j1qwtsbnaxjb7y4
FXP107 - REQURES BASEBAND 64
- http://uploaded.to/file/3d17uifq/from/yrqfhn
Or https://rapidshare.com/#!download|294tl5|3860663662|.64_baseband_for_FXP106_.ftf|26632|R~6369F50FC576967574A0879304EDD989|0|0
IF U WANT Ready to copy without modifying scripts : S000000N
WORKING
AUDIO - ok
GPS - ok
WIFI - ok - new wl12xx_mac80211
TOUCH SCREEN - ok
CWM RECOVERY 5.5 - ok
BT - ok
GSM - ok
VIDEO DECODER - ok
3D - ok
GRALLOC - ok
HOTSPOT - ok - command line for now
USB MTP - settings->storage->push menu->usb computer connection->media device
NOT WORKING
CAMERA - Red Screen!!!!!
GSM DATA - buggy - for some networks works for some does not work
FXP107
CM9.0 RC0
- latest cm 9.0 fixes
- updated radio to baseband 64
- sim pin fix
- camera for all devices (without light for now)
[Play]
- fixed touchpad and gamepad
[X10]
- removed FPS limit (now we have 35 fps)
[Neo V]
- separate addon for Neo rom
If Any One Have An IDEA TO FIX CAMERA BUG
PM ME
CREDITS
FreeXperia Team
Cyanogenmod Team
& all GR8 dev's on XDA
only 3G data is not working or even 2G data too not working?
And one more thing.. are u facing few here and there random reboots with this ROM?
We want a working camera ......
Still will give a try ..........
Have anybody tried the camerafix from MIUI or tried to changed the camera libraries with the ones published by sony?
palimatix said:
only 3G data is not working or even 2G data too not working?
And one more thing.. are u facing few here and there random reboots with this ROM?
Click to expand...
Click to collapse
No I'am Not Facing This Problem With This ROM
He had one problem with the wake phone (unlocking)? I, unfortunately, for this reason I had to install CM7 back : (
Will give this a try when I go home.. .. Thanks Guys!
Any of u tried the miui cam fix ? it works for cm7 , just try and see if it works for cm9 !
---------- Post added at 03:31 PM ---------- Previous post was at 03:30 PM ----------
HarryBo84 said:
Have anybody tried the camerafix from MIUI or tried to changed the camera libraries with the ones published by sony?
Click to expand...
Click to collapse
will try now and let u know !
who is developing this rom?
kaassaus said:
who is developing this rom?
Click to expand...
Click to collapse
From 1st post / link you can see it's a FreeXperia developed project with few updater scripts being replaced to make ROM work on Neo V. Also, FXP works on CyanogenMod sources..
tried the miui cam fix ! not compatible to cm9 . but the posted rom looks amazing , first boot took surprisingly too long , but it was worth the wait ! but camera is the only drawback . . so i switched back to my old miui rom . . but as soon as the cam fix arrives , this will be the rom running on my phone
the kernel overcloak is not enough to make this rom faster..... is holy crappy ugly f$%&"ng slow!!!!!!. ICS alpha from SE and the "activated versions" runs far away faster than this one.
Need more tunning to be used as a production rom, anyways is good to see cyanogen didn't forget us at all. And the FXP team is working for all 2011 models and not just for the ones they got from SE.
Thanks,gonna try this tomorrow.Btw what are ICS GAPPS ? and can you upload those files to somewhere like hotfile/filesonic/4shared due to megaupload being killed by FBI :/
Thilina said:
Thanks,gonna try this tomorrow.Btw what are ICS GAPPS ? and can you upload those files to somewhere like hotfile/filesonic/4shared due to megaupload being killed by FBI :/
Click to expand...
Click to collapse
Please gapps: http://www.multiupload.com/HWU4IJO1M5
I'd be more than happy to use this ROM from FXP, when camera is fixed (front facing and the back camera) But nice to see CM9 for Xperia Neo V.
mati2228773 said:
Please gapps: http://www.multiupload.com/HWU4IJO1M5
Click to expand...
Click to collapse
Thanks,someone should update 1st post with this link.Btw what are these files anyway? I mean gapps
Thilina said:
Thanks,someone should update 1st post with this link.Btw what are these files anyway? I mean gapps
Click to expand...
Click to collapse
Gapps is the google apps. Due to licensing restrictions these apps cannot come pre-installed with CyanogenMod or other mods and must be installed separately. Contains apps like google market etc.
Thilina said:
Thanks,someone should update 1st post with this link.Btw what are these files anyway? I mean gapps
Click to expand...
Click to collapse
Updated
hi need help.
upon installing update from sd card on CWM it says
CWM-based REcovery v 5.5.0.4
--Installing: /sdcard/update.zip
Finding update package...
Opening update package...
Installing update...
Installation aborted...
the installation stops and i don't know what to do. i really appreicate you help.
thanks in advance...
GPRS working??
UPDATE: With the newest release (05/23), Root is broken, flash superuser 3.0.7 to fix.
UPDATE 2: Working on a flashable zip so GSM users can use Gummy, too.
UPDATE 3: Current release has broken Google Play, I am looking into fixing it.
NOTE: IF YOUR PHONE FORCE-CRASHES ON BOOT, YOU DID NOT FOLLOW THE DIRECTIONS FOR INSTALLATION. READ THEM. UNDERSTAND THEM. THEN INSTALL. IF YOU DO NOT FOLLOW THEM I WILL LAUGH AT YOU.
I did not do ANY of the major work for this ROM. All I did was get the correct build environment so Qcom chips would work. All credit for this rom goes to the Team Gummy Devs below.
Team Gummy:
Kejar31 - Primary Developer and Project lead
Syaoran12 - Developer
Mobile_Sensei -Developer
Atesc - Developer
Sixstringsg - Developer
Stevespear426 - Developer
PoiTEE - Forum support guru
Daank - Wallpapers and artwork
Credits for help getting this to work:
Hashcode - Thanks for the pm help & who I also kanged the intro from
Atarii - Pointers on irc!
Keiran & Doom - For awesome Kernels!
FXP - For device & vendor trees (that I modified) & giving us CM9 in the first place to play around with!
Everybody's whose worked on AOSP/CM9 sources!
Source Code for my tweaks:
vendor/Gummy (adding in zeus)
vendor/semc (changing libs to R800x instead of R800i)
device/semc/msm7x30 (small changes)
device/semc/zeus (small changes to make it work)
frameworks/base (Latest cm9 code integrated into gummy framework)
How To Install:
Code:
1) Download Doomkernel for ICS (download link below)
2) Flash DoomKernel (you’ll need it for install, but nothing else)
3) Boot into recovery (back button when your phone vibrates & led turns on)
4) Wipe Cache/Davlik Cache.
5) Optional: Wipe Data
6) Install Gummy Zip
7) Optional: Instal latest Gapps
8) Open up terminal/command prompt
9) When Install is done, go to mounts & storage and mount both /cache & /data
10) Type into command prompt/terminal adb shell
11) copy/ paste the folowing 2 commands into the shell
If you didn’t wipe data:
mv /data/dalvik-cache /cache/davlik-cache
ln -s /cache/dalvik-cache /data/dalvik-cache
If you did wipe data:
mkdir /cache/dalvik-cache
ln -s /cache/dalvik-cache /data/dalvik-cache
12) The first command takes about a minute.
13) Turn off phone, flash included (DFK-v4 kernel)
14) Turn on & enjoy Gummy
Sources:
Davlik cache fix: (Courtosy of Reukiodo) http://forum.xda-developers.com/showpost.php?p=7562614&postcount=2 (slightly modified to work for us)
Downloads:
Gummy: http://www.mediafire.com/?iz5gnorkpbgfk
Doomlord ICS v2: http://www.mediafire.com/?66mf9jw7c5vuxz6
Current Bugs:
Wifi hotspot tethering does not work
Panoramic Camera
Video Recording
Bluetooth A2DP
Facebook Sync (it's a facebook issue, not a framework issue)
Kernels you can use:
KeiCS KernelSource
DoomLord's ICS Beta -- Source -!- Breaks hardware video
Google Apps: (needs to be flashed separately)
http://goo.im/gapps
Changelog
2012 May 17th -- Beta Release
2012 May 23rd -- Full Release!! Graphical Glitches Fixed!! Note: For this release, I did not include a kernel, either download KeiCS or Doom (links above)
Screenshots
Reserved for more info
Sent from my R800x using Tapatalk 2
Reserved.
Sent from my R800x using Tapatalk 2
I'll update the firmware list. I wont like it because I don't know if the thread number will change. I've been an admin on many forums and haven't noticed it.
Sent from my R800x using XDA
Yay, I just got my Xperia and I'm loving it. I love Gummy on my Nexus, and I bet it will be just as good on the Play.
Release coming very soon, need to work out kernel difficulties. (took down the bad zip)
paxChristos said:
Just a heads up, I'm uploading an unstable version of gummy if anybody wants to tear it apart,
WARNING: THIS VERSION DID NOT BOOT FOR ME, IF SOMEBODY WANTS TO TRY & FIGURE OUT WHATS GOING ON, TRY IT.
Once again: IT DIDN'T BOOT FOR ME, MAKE A NANDROID BEFORE YOU FLASH IT, IT PROBABLY WON'T BOOT FOR YOU EITHER!!!
(link to folder: http://www.mediafire.com/?iz5gnorkpbgfk )
Click to expand...
Click to collapse
I'm going to take a look through and see what, if anything, I can try to figure out. Is it based on CM9 like CNA is, or did you try to do a direct port?
Update: Well, after digging through the zip, I noticed there were a lot of things missing in the /system/framework and the /system/bin folders. In my noobish logic, I figured if the rom is based on CM9 stuff, why not copy/paste the "missing" stuff from CM9? And after trying that, I didn't make it past the kernel splash screen. In my limited experience, I don't know what to do to help.
lightningdude said:
Update: Well, after digging through the zip, I noticed there were a lot of things missing in the /system/framework and the /system/bin folders.
Click to expand...
Click to collapse
Depending on the kernel, /system/bin could be filled out other ways. but thanks for looking in /system/framework, that's where (I think) the problem is!
Pax
paxChristos said:
Depending on the kernel, /system/bin could be filled out other ways. but thanks for looking in /system/framework, that's where (I think) the problem is!
Pax
Click to expand...
Click to collapse
I know it's been less than a day, but have you had any chance to pick at it and figure anything out? I'll most likely be sticking with CNA rather than switching to Gummy, but if there's anything I can help with, let me know.
lightningdude said:
I know it's been less than a day, but have you had any chance to pick at it and figure anything out? I'll most likely be sticking with CNA rather than switching to Gummy, but if there's anything I can help with, let me know.
Click to expand...
Click to collapse
Still working on it
Got it.
Waiting on Team Gummy's Ok to post.
The problem was deeper than the framework? Or did life catch up to you?
Sent from my R800x using XDA
lightningdude said:
The problem was deeper than the framework? Or did life catch up to you?
Sent from my R800x using XDA
Click to expand...
Click to collapse
Nope, needed to take a different tact in building & got it built uploading soon
It may be obvious by the need for step-by-step instructions, but this is not for the faint of heart.
That being said, this rom definitely has great potential, the main thing holding me back is the graphical issues. It sounds like pax already knows where to look, it's just a matter of making it right. The other thing keeping me from Gummy is the fact that I've finally gotten settled into PlayOSP, and I'd kind of like to stay on a rom for more than a few days for once.
I can't believe I'm making a comment about having too many options! Just a month ago, I was stuck with almost two ICS roms, and now we're over four! And two of them are still just for us CDMA users! Life is good. Thanks, paxChristos.
Working on a possible fix for graphics now, will update if it works
Pax
Sweetness
My fix didn't work (i edited one too many files) I'm gonna have to go back & take is slowly (still working on it, it's just gonna take a little while )
Pax
Take your time, man, you've done a lot already.
Sent from my R800x using XDA
Release Candidate Relased for Team Gummy Rom!! Everything that works in CM9 should work with Team Gummy!!
Pax
paxChristos said:
Release Candidate Relased for Team Gummy Rom!! Everything that works in CM9 should work with Team Gummy!!
Pax
Click to expand...
Click to collapse
Great work pax!
hi,
i am posting here the rom which we made with all help from the thinktank thread posted in general
This is a jelly bean rom mostly based upon cm10
SEE SUPERVENOMS POST FOR THE NEWEST BUILD
what is working:
touchscreen
wifi
bluetooth
gamepad
gsm (calls text)
sound
Video
Click to expand...
Click to collapse
what doesn't work:
Camera
Data
wifi hotspot
touchpads
everything else!
Click to expand...
Click to collapse
Credits goes to:
Paxchristos
Cosmicdan
supervenom
smiley76
Chevyowner
fxp
and the biggest thanks to Kamarush!!
Without this guys we won't have JB for our play
DISCLAIMER:
We are not responsible if you brick your device, desktop/notebook crashes, miss your alarm and lose your job or something else.
Don't ask for eta (estimating time of arrival)
If anyone one want to use a fix or some fixes or maybe the rom as base you should pm me.
if i see anyone is using fixis without permissions i will pm a moderator!
Keep this thread ontopic
Downloads:
Rom: JBX Alpha 1
Kernel: Kernel by supervenom!
wifi modules: Wifi modules by supervenom
adreno drivers: New Adreno drivers by supervenom and kamarush
Instructions:
-First flash the kernel with
fastboot flash boot boot.img
Click to expand...
Click to collapse
-Then boot to recovery (when turning device on press volume buttons when the blue light powers up)
-Go to mass storage and copy/paste the rom, wifi modules and adreno drivers to your sd
-Then do a factory reset
-Flash the rom, wifi modules and adreno drivers
-Reboot
-Go to: settings -> developer options -> disable hw overlay
-Enjoy!
Updated 08/22 (CDMA Uploaded, GSM Uploading)
CM10 Alpha
What works:
Sound
Data (CDMA for sure, GSM Don't know)
Video
SMS
Phone
What Doesn't Work:
Camera
(tell me and i'll add to the list)
Download link -- Rom: http://www.mediafire.com/?6ggud46a7c6cq (Zeus for GSM, Zeusc for CDMA) (Use included kernel)
Pax
GSM and CDMA
Youtube review: http://youtu.be/CBrYiBIvs3E
Changelog:
Code:
- Fixed Data
- Latest CM10 changes
- Released CDMA
- Fixed SD problem
Instructions:
- Flash kernel with: fastboot flash boot name_of_kernel.img
- Wipe everything
- Flash ROM.zip in recovery
- Reboot
- Optional: flash GApps in recovery (You have to mod your partitions to have needed space on /system go HERE)
What works:
- Boots
- Root
- Orientation
- Touchscreeen
- USB Debug
- GSM
- GPS
- Gamepad
- Bluetooth
- USB Mass storage
- Touchpads
- Sound
- WiFi
- Video playback
- Data
What doesn't:
- Camera
ROM GSM md5:e2baae10923f71c0296ffcb6f99c7563 Updated 03/08
ROM CDMA md5:02016c1ce8da9c9e3737677de4cd8638 Updated 06/08 (Does not boot, only for testing)
Kernel FLASH IT! md5:c86a4f5100c98df4a70ad7bb004d1e65 Updated 05/08
NewAdrenoDrivers md5:726d5b9c3e780fc7f0cf6cc52427ed60 (Included in Beta)
GApps md5:f62cfe4a827202899919fd932d5246d7
Ugly hacks used:
https://gist.github.com/3194307 This have to be added to kernel
Our sources: https://github.com/JBX/
Nick forgot to thanks FXP and the whole CyanogenMod community.
Google Apps for Jellybean 20120726 "Mini" - Download from Mediafire
Do not flash full gapps, system will be full and the ROM will break if you try to install another ZIP (like the Adreno update). This gapps has Faceunlock and Gmail removed to give us more free space.
JBXbeta.img
JB Modules
This has the same fixes that chevyowner made in the thinktank thread, just compiled by yours truly. I figured I'd post it here to make it easier to find. This is overclocked and have more governors than FXP's kernel base does. Oh, and even though I said my modules wouldn't change, they have. So go ahead and redownload them, or stick with the modules that paxChristos uploaded.
Thanks chevyowner for fixing wifi, and then fixing it again. Fixed to save wifi passwords.
reserved for who i missed
finally =)
Will there be an new signature pic?
yes, it would be nice if we can work as a team (team icx or JBX)
Oops looks like I was way to late to try help sorry, couldn't flash anything/there fore contribute the last week due to job interviews waiting for phone calls ect...
Sent from my Xperia Play
Got it from stable to unstable
Now only boots when on charger before I didn't have it
Sent from my LT22i using xda app-developers app
I'm feeling Project Butter on the one Paxo released with jbtestLD.img kernel or something.
gamepad works, btw.
you have it working without usb plugged in?
I can use the rom pax released with the kernel lightningdude released without usb cable in
nickholtus said:
you have it working without usb plugged in?
Click to expand...
Click to collapse
yes i do.
hmmm, then i did brake something
ok looking for a fix now
edit: going to sleep now.
uploading will be tomorrow
Got it again
Sent from my LT22i using xda app-developers app
nickholtus said:
How did you flash it? And which baseband?
Sent from my LT22i using xda app-developers app
Click to expand...
Click to collapse
Flashed the kernel, then the rom in recovery.
I was using .62 firmware so I think -64 baseband?
Got it
Also Bluetooth works
Can't test data but it should work
Sent from my LT22i using xda app-developers app
Hallo, here is Unoficial MIUI for Sony Xperia Go bassed on CM9 FXP project, compiled by latest patchrom tool. Some things is mising but rom is for daily usage without problem!
Curently fixed things:
- mounts menu and internal mounts
- phone storage is not detected by PC
- external sdcard and everything related to external sdcard
- camera recording, camera photo, camera panorama
- rotation
- lights
- videos frezing
- file manager
- some crashes inside other menus
- youtube HQ videos
- wifi
- mobile data
- galery - crashing
- android aplications menu - crashing
- Smart Dialer
- cal log
- Xperia keyboard
- autostart manager
- personal dictionary
- usb tethering
- wifi tethering
- a2dp
- rotation in games - status full fixed
- If I forgot something please let me know.
Missing things:
- let me know?
Not working:
- FM radio audio routing
- let me know?
Download link:
- http://d-h.st/Y8r
Plan:
- I use this rom daily, MIUI is my favorite rom and my plan is fixining all remaining bugs. If some one is interesting to get this rom full fixed please test it, try to fix something, give your opinions, give your fixes, let me know list of missing things...etc ..etc
My MIUI source code:
- http://github.com/munjeni/miui_sony_xperia
If you want to help you can use my source code and upload to your git, than start patching, but you must open too these source code public and you must give full credits to my hard in your post if you working on these source! Do not forget, I opened source code public and sharing it with you because its my good will !!! So I expecting from you too to open source code if you using my source code as a base! Thanks!
I am surre you will love this rom after first usage!
Full credits:
- FXP (CM9 rom)
- Google, Cyanogenmod team
- Micode team (special credits to yu88my)
- D9ALT for testing and reporting bugs
- xpraken for Xperia keyboard fix
- @nthr@xNine9 for testing and reporting bugs
- akkufix for testings and deutch translation
- vitkutny for czechoslovakia translation
- Rodger_Rulez for rusian translation
- sijav for persian translation
- raypol97 for polish translation
reserved
wow
waiting munjeni : )
Test build 1 is done!
munjeni said:
Test build 1 is done!
Click to expand...
Click to collapse
Are wireless connectivities like wifi, data and bluetooth working?? because i love to use this rom, but i need theese things!!
and are videos like, on youtube working??
Thanks for this rom!! :thumbup:
Sent from my Xperia Go using xda premium
TomNilson said:
Are wireless connectivities like wifi, data and bluetooth working?? because i love to use this rom, but i need theese things!!
and are videos like, on youtube working??
Thanks for this rom!! :thumbup:
Sent from my Xperia Go using xda premium
Click to expand...
Click to collapse
Yes all working of these!
munjeni said:
Yes all working of these!
Click to expand...
Click to collapse
You are my favorite
Sola port will be highly appreciated
Anyways keep your awesome work continue :thumbup:
Sent from my MT27i using xda premium
cant uninstall app
after reboot
Unfortunately, the process android,process.acore has stopped.
bug wifi
when mobile sleep mode wifi auto turn off.
kore44110 said:
cant uninstall app .
Click to expand...
Click to collapse
Did you read OP ? See "Curently missing:"...
sorry
Here is simple tutorial and my script for converting FXP CM9 rom to MIUI. You can use it for making MIUI on Xperia Sola too (download acervenky MIUI Sola rom)!
First of all you need to make some folders:
mkdir cm9miui
cd cm9miui
mkdir GAPPS
mkdir MODULES
Click to expand...
Click to collapse
- Download gapps-ics-20120429-signed.zip and extract it to GAPPS folder.
- Extract boot.img from my MIUI build and put it into root of the cm9miui.
- Extract all .so files from /system/lib/modules from my MIUI build and put it into MODULES folder.
- Download acervenky MIUI build and put it into root of the cm9miui, rename miui zip archive to miui.zip
- Download FXP CM9 buid and put in into root of the cm9miui, rename archive to stockrom.zip
- Download micode tools (its not needed now but you can download if you want to patch framework):
git clone https://github.com/MiCode/patchrom_tools.git TOOLS
Click to expand...
Click to collapse
- Finally, make empty make.sh file and put this -> http://paste.ubuntu.com/1517684/ inside, save it, give 755 permission to it.
If you prepared everything, you can start converting. Run ./make.sh and wait until script convert CM9 to your new MIUI rom! Enjoy!
============================================
Thats an easy part. But we need to modify 3 frameworks! Framework.jar, services.jar and android.policy.jar to get other things fixed! We need to disasemble and compare cm9 framework with these 3 frameworks and add/moodify/merge/patch these 3 frameworks using and comparing with cm9 framework! I will try to get MIUI from real patchrom, if I can not get it booting I will try to fix something in current build. I will be happy if some one start working in curent MIUI build and if some one fix something, curent build is "solid" build but have some things missing, but in any way rom can be used daily without any problem, I using it daily! Enjoy guys with script... waiting something fixed by you!
Quite a tutorial
That's why you are so special
Sola owners who has some geeky capabilities, start something like this.
We are overwhelmed my lord
Sent from my MT27i using xda premium
munjeni said:
Here is simple tutorial and my script for converting FXP CM9 rom to MIUI. You can use it for making MIUI on Xperia Sola too (download acervenky MIUI Sola rom)!
First of all you need to make some folders:
- Download gapps-ics-20120429-signed.zip and extract it to GAPPS folder.
- Extract boot.img from my MIUI build and put it into root of the cm9miui.
- Extract all .so files from /system/lib/modules from my MIUI build and put it into MODULES folder.
- Download acervenky MIUI build and put it into root of the cm9miui, rename miui zip archive to miui.zip
- Download FXP CM9 buid and put in into root of the cm9miui, rename archive to stockrom.zip
- Download micode tools (its not needed now but you can download if you want to patch framework):
- Finally, make empty make.sh file and put this -> http://paste.ubuntu.com/1517684/ inside, save it, give 755 permission to it.
If you prepared everything, you can start converting. Run ./make.sh and wait until script convert CM9 to your new MIUI rom! Enjoy!
============================================
Thats an easy part. But we need to modify 3 frameworks! Framework.jar, services.jar and android.policy.jar to get other things fixed! We need to disasemble and compare cm9 framework with these 3 frameworks and add/moodify/merge/patch these 3 frameworks using and comparing with cm9 framework! I will try to get MIUI from real patchrom, if I can not get it booting I will try to fix something in current build. I will be happy if some one start working in curent MIUI build and if some one fix something, curent build is "solid" build but have some things missing, but in any way rom can be used daily without any problem, I using it daily! Enjoy guys with script... waiting something fixed by you!
Click to expand...
Click to collapse
Munjeni I would like to work on this MIUI for Sola............ need your guidance........... can I PM you for help related to this.????????????
@[email protected] said:
Munjeni I would like to work on this MIUI for Sola............ need your guidance........... can I PM you for help related to this.????????????
Click to expand...
Click to collapse
No by pm, please ask here! I am sure some one will help you if I have no free time to help you!
I can't turn on battery percentage!?! When i click on percentage, it still shows graphical!!
Sent from my Xperia Go using xda premium
how to Install it? do I need to wipe something before install or just install like regular cm update whitout wipe.
kala123 said:
how to Install it? do I need to wipe something before install or just install like regular cm update whitout wipe.
Click to expand...
Click to collapse
You need to wipe everything because its not update
TomNilson said:
I can't turn on battery percentage!?! When i click on percentage, it still shows graphical!!
Sent from my Xperia Go using xda premium
Click to expand...
Click to collapse
I going to stop development for this rom and make new (from begining) by patchrom tool... because curent rom is an repack only (mean - framework is not merged with latest CM9 - frameworks is from old MIUI, so I need to merge it, but I will not do it to current rom, instead of doing that I will start with latest MIUI). I started allready, rom fail to boot, but I will fix it soon
I will wait the next version then
thanks
munjeni said:
I going to stop development for this rom and make new (from begining) by patchrom tool... because curent rom is an repack only (mean - framework is not merged with latest CM9 - frameworks is from old MIUI, so I need to merge it, but I will not do it to current rom, instead of doing that I will start with latest MIUI). I started allready, rom fail to boot, but I will fix it soon
Click to expand...
Click to collapse
...and that happens, after i read the whole "acervenky MIUI Sola thread" and loaded tools...
But you're right. :good:
Its quiet better taking latest MIUI and merging this.