Can't Send / Recieve SMS after 2.1 Update - XPERIA X10 Q&A, Help & Troubleshooting

Hi, After updating to 2.1 i noticed i cannot recieve text messages. I couldn't find on forums how to fix this but i believe it might be something to do with APN. I tried looking but can't find it on forums.
Can someone guide me through this please. Maybe it might not be APN?
Thanks.
Firmware version : 2.1 -update 1
BB version : 2.1.52
Kernel : 2.6.29
I use ATNT in California

Do you have signal at all?

Here's a thread with apn settings and how to update to X10a global generic 2.1.A.0.435
http://forum.xda-developers.com/showthread.php?t=1012380

Everything works fine in my phone beside send/receive text from other callers.
I can call/receive calls, signal, internet, etc.
Another extra thing about text, I am able to receive text if i type a code EX*data# to know how many data u used this month).
I tried the apn settings JBAgent posted already, it doesn't work.

Well i would make a backup of everything you want, then download Sony Ericsson Update Service (SEUS) and run it which will fix your phone but wipe everything on it.

Before you do that, have you gone to settings / Sony Ericsson / Auto search for internet settings? Then call At&t and have them check your connection. It could be your sim card.

Related

[SOLVED] Mobile connection and SMS stopped working after messing with ROMS

Hi guys,
few days ago I've decided to move forward with Fusion Update 7 ROM to Fusion Update 8. Procedure was about normal beside the fact I had also purged SD card. Upgrade went well, but:
I cannot get mobile connection
No SMS can be sent
No matter which ROM/RADIO I had flashed after my previous move everything beside those two is working. So I can get WIFI connection or receive SMS, I can also call and receive calls.
My configuration:
- Hardware: HTC HERO GSM (white)
- Recovery: AmonRa 1.7
- ROM: FROYO_2.2_elelinux_v2.2 (at the moment)
- RADIO: 63.18.55.06OU_6.35.15.01 (at the moment)
Additional info:
- SMSC is set correctly (checked using *#*#4636#*#*)
- APN list is correct
- rollback to vanilla 1.5 ROM from RUU not helped
- other SIM cards from other carriers work the same way
I trying to get some debug information using adb, but only thing I can find is that ppp connection is missing in netcfg.
Do anyone know how to initiate Mobile Connection through adb shell ? or anyone get similar problem before?
Thank in advance,
Problem solved. During messing with ROMS my SIM card must been somehow damaged.
After more tries with other SIM cards my phone started to work finally.
You are missing the correct apn settings for your mobile data and also missing or have the wrong SMS service number, have a search on the forums here, or Google and you should find them. Always worth backing these up or writing them down, as not all rom's have necessarily got all providers son's included.
Sent from my HTC Hero using XDA App
Thank you for fast reply.
I checked those before:
SMSC:
- refreshed with *#*#4636#*#* and those looks correctly for my carrier
APNs:
- there where missing fields in APN config which I've updated according to carrier configuration
Still nothing had changed.
I assume that it must be some kind of config that do not change between ROMS.
(I will update first message with those info.)
Did you checked with an other SIM/carrier?
Yes I did.
Effects where the same.
I've also rolled back to vanilla 1.5 ROM from RUU. Nothing changed.
It must be some kind of external configuration that is not changed via ROM replacement. Can this be true?
Thread moved to Q&A.

Custom ROM MMS Mini Guide (If you don't usea prepaid data plan) By: Blitzkri3g

Blitzkri3g said:
Well I m on Floyo 0.15 and had some issues with MMS sending/receiving.On stock 2.1 SE ROM when you have Mobile Data OFF,our X8s still automatically use GPRS to handle mms messages.On Floyo and other ROMS you need to turn it ON which may result in additional charges from your carrier if you don't use a prepaid internet data plan.
So what do you do in this case you may ask! Well if you only use WIFI for internet and still wanna use MMS you should customize APN Settings.
First google you carrier's APN settings for MMS and set it up manually.Be carefull to not use capital letters on some fields!
Then delete every other APN settings leaving Mobile Data ON all the time and Reboot!
This way you can MMS technology without any fear of additional internet charges. ;-)
APN Settings can be found in WIRELESS ->MOBILE NETWORKS->APN menu in any custom ROM!
Click to expand...
Click to collapse
this may be useful for you too
don't forget to thank any useful post ;-)
Original thread here
big thanks to Blitzkri3g
APNs for x10mini CELCOM [ROM] MiniCM6-1.0.0-RC2
--------------------------------------------------------------------------------
I usually send SET to 20999 to get my setting from my service provider(CELCOM)
They will give me a configuration message that i will save to set my APNs automatically.
But after installing ([ROM] MiniCM6-1.0.0-RC2, Froyo Cyanogen 6.1.3), it seems like i cannot receive the configuration message or in other words maybe the custom rom cannot read the configuration message.
Please Help Me With This
kingmagauk said:
APNs for x10mini CELCOM [ROM] MiniCM6-1.0.0-RC2
--------------------------------------------------------------------------------
I usually send SET to 20999 to get my setting from my service provider(CELCOM)
They will give me a configuration message that i will save to set my APNs automatically.
But after installing ([ROM] MiniCM6-1.0.0-RC2, Froyo Cyanogen 6.1.3), it seems like i cannot receive the configuration message or in other words maybe the custom rom cannot read the configuration message.
Please Help Me With This
Click to expand...
Click to collapse
backup 1st ur apn setting using backup and restore in stock rom..flash custom rom then restore it..after that install quick setting from market..enable data off mms on and 3g data on then reboot..if this solve the problem thanks @hahuhe for his information in this thread http://forum.xda-developers.com/showthread.php?t=1014585
and me..

[Q] MMS problem

Hello
I got a big problem that i can't resolve alone. I configure a new APN on my tab and i can access 3G+ but it seems my MMS profile doesn't work. I can't send or receive any MMS....
I join 2 different configurations for Android , one for HTC and the second for Samsung galaxy tab. Anyone can give me any solution to sent an MMS with that?
Thanks a lot!
Pleaaaaassssse help!
I don't know about samsung tab but if it happen to me I will flash a new rom.
Sent from my ViewPad7 using xda premium
It would be helpful to post a little more details on your Vpad7 basics so that maybe, one of us can help figure it out or test our ROM:
Let's take a simplistic step-by-step approach first -
a. are you using stock/factory ROM or rooted, custom ROM including verison #
b. your mobile carrier for the SIM card, both SMS and MMS enabled & working on another quad-band GSM phone
c. SMS working on the Vpad7 as is - both incoming & outgoing
d. using the default Messaging feature/module installed or using something else,
and if you haven't try it already, download & use Handcent for SMS/MMS
f. if you have already done all or some of the above, do a Master Reset on the Vpad7 first to clear all the existing settings, boot into RECOVERY to wipe dalvik/cache/system, and then flash, as suggested, a different custom ROM.
g. any technical support or help from your mobile phone carrier
Cheers - mastering everything on the V is a challenge !
First , i've tried with standard rom. No succes. Then i flashed my vpad7 , installed TJ's rom and... same problem.
BTW you're true , i'll try my sim on another phone , try MMS. And i'll try to put another sim in my vpad7 too.
But , i just think one little thing is missing , because when i look at the other froyo's config , some little thing are changing between diferent phone model.
So , i think viewpad need a personnal configuration.
I got Gosms and tried to configure MMS on the program settings , but same problem.
I've called the technical support but can't help me and told me : "we have some configuration on website , try these , if it don't work , not our fault"
Thanks for your help
Does anyone can send me any working config for MMS on viewpad 7? Just want to see what's different.
THANKS...
These are mine under Settings > Wireless & networks > Mobile Network > APNs, they're OTA/downloaded automatically & self-configured
AT&T MMS (wap.cingular)
Proxy (Not Set)
Port (Not Set)
Username & Password (Not Set)
Server (Not Set)
MMSC (http://mmsc.cingular.com)
MMS proxy (66.209.11.32)
MMS port (80)
MCC (310)
MNC (410)
Authentication (Not Set)
APN type (mms)
Note - these are nearly identical to AT&T WAP, which is usually configured for web browsing with data enabled.
Ok , i tried all solutions and then:
My sim works on other phone , i can send MMS .
Another Sim on my viewpad ( different operator) , once configured , worked. So it's not a viewpad or sim problem , just a Digicel configuration problem.
Any solution?
MMS Working Alternative
I have a Htc Evo 4G synergy rom,I tried all fixes to no avail...I did happen to get internet working..so 1 day while texting my daughter ,we both use Go sms pro ,i went into the setting where you can doodle,well theres an attachment feature to insert images and add a picture...well it works!! And now my solution is here...works for me.

[Q] Where is my number?

Happy new year to all in XDA! whell now, the question: i use a rom based on V20A (brazil) and when i enter in "About the phone -> Status" i can see my phone number and operator! it only say "Desconocido"(Unknow) in spanish.
I test some rom based in other version and have the same bug, how i can fix this? or how i can add the info of my operator in venezuel "Digitel"?
why i need that? because i can put my photo to the sms system and other thing related to my profile, like sync with facebook, twitter, etc...
thanks in advanced!
35 views and no awnser?
Yes, that because alot of topic here talk about it. Please do search before you post here...
Send from my Calculator
go to setting>call settings>advance settig>my phone number :-D
--------------------------------------------
Rom- Lunar ics
Kernel-Golden leaf
Facebook- [email protected]
not advaced settings in my call menu, and i search but i dont find awser! i'm using 2.3.3 V20A rom!
Exedion said:
not advaced settings in my call menu, and i search but i dont find awser! i'm using 2.3.3 V20A rom!
Click to expand...
Click to collapse
Okey, that because
1. Your cellular provider dont give your phone number on your SIM (hardware)
2. Android dont have 3rd application that have access to change your phone number (as i know, CMIIW).
What can you do for having your phone number on your status?
1. Use another phone like sonyericson or nokia that can give access to give "my number" on SIM card (i dont have specific knowledge about the series of phone)
2. Move your sim from android to another phone.
3. Give your phone number on setting.
4. Move back your sim to android, and check what you have done...
Edit:
This someone that success used another phone to change "my phone number"
http://forum.xda-developers.com/showpost.php?p=20569918&postcount=2
Send from my Calculator

[Q] Roaming not working

Hello there!
I recently installed the UltimaRom V.6.0.2 on my Gti9300.
Everything seems to working grand other than the data connection which does not function, 'mobile network state' is 'disconnected' and 'roaming is 'not roaming' under status in the settings (please see attached screenshot) so cannot choose internet, whatsapp etc.
This has been checked in the mobile network options, but this will not function regardless. I then thought it might be due to the option to install the baseband version and I chose I9300XXDLI8. Is this where the problem lies since I am receiving and still able to make calls and texts.
I am a t-mobile customer in the UK with 'everything everywhere', I believe the APN settings are OK. I can still send and receive MMS, but no data connection...
Please help me out!
The Rom on installation gives me the choice to install the following baseband versions:
XXELJ2
DDDLJ1
NEDLI1
XXDLID
XXDLIB
XXDLI8
Have I installed the wrong one?

Categories

Resources