A friend of mine has just purchased the Atrix through Bell. I'm a Galaxy S user, but I've been trying to read up a little on the Atrix to help him out. I have 2 quick questions.
1) What is going on with all the Do-Not-Install-On-Bell-Atrix I'm seeing with all the Development threads? I'm sorry if this has been asked 100 times, but are there any ROM's that are compatible with the Bell Atrix?
2) If there are Bell Atrix ROMs, before flashing I'd like to know if there are any recovery methods for bricked devices or flashing gone wrong? Always good to have a backup plan I've found these 2 from the [REF], any advice on which you prefer?
http://forum.xda-developers.com/showthread.php?t=966405
http://forum.xda-developers.com/showthread.php?t=991072
Any other words of wisdom you'd like to share with a new Atrix user?
Thanks!
Actually..if your friend follows this thread http://forum.xda-developers.com/showthread.php?t=1070076 then he can actually install most of the same pseudo-roms everyone else can (as well as themes). So essentially there hasn't been much need for Bell specific roms (or other international specific) as of yet.
Related
This is my first android phone. Samsung Galaxy S Vibrant. I plan on rooting my phone tomorrow and I was wanting to put 2.2 firmware on the phone. I have been told that there are different roms and such and I was hoping someone here could tell me which is the best way to go about upgrading my phone. I tried reading some threads but I am not sure which is the best way to go. Any help would be appreciated.
If you've never rooted your phone and installed a custom ROM before... Read, read, read these forums and especially the thread for the ROM you are thinking of installing. Know how to get yourself out of a jam before you even get in it.
Q&A Section
You might wish to begin your education here on this phone, Android, etc here:
NOOB GUIDE: HOW TO ROOT/ODIN/FLASH/RECOVER
http://forum.xda-developers.com/showthread.php?t=849028
Vibrant Bible / Directory
http://forum.xda-developers.com/showthread.php?t=771111
After reading this and understanding a few things, you should be able to flash new roms, backup, restore, fix a brick, etc.
epakrat75 said:
NOOB GUIDE: HOW TO ROOT/ODIN/FLASH/RECOVER
http://forum.xda-developers.com/showthread.php?t=849028
Click to expand...
Click to collapse
+1...This is what I followed when I flashed my wifes vibrant awhile back, and followed again just a few days ago when I picked mine up.
As for 2.2 ROMs...you will just have to play with them. I would recommend starting with flashable ROMs as they are a little easier to work with if you do not have a lot of experience with flashing
I might suggest this one if you want a no frills basic 2.2 stable, rooted ROM to work with
http://forum.xda-developers.com/showthread.php?t=857974
Cheers
Aaron
Thread cleaned. Stop the flaming.
Thanks for the replies! I will start off with that nice guide on how to root the phone. I get the phone tomorrow so hopefully I will not be in here crying about how I ruined my phone. The last phone I modded was the first gen iPhone a few years back. There are so many different things to read that this is a little confusing. I mostly created this thread to get pointed to what works best for those on this forum.
Hi there, I am looking for a step by step guide for Bell users who are stock 2.3.4 and looking to root, unlock, change roms etc. The problem is, I'm currently having trouble finding this information. I am coming from a Nexus One, and then a Desire Z, where the process was much easier.
When I search around, I find conflicting ways to do this, with separate instructions for the Bell Atrix vs the other versions. I know we don't have a Bell Atrix section, and I tried searching but couldn't find anything other then this here. Can anyone confirm these are the steps to make this work?
When I figure this out I will write a definitely write a guide for us Bell users. Thanks!
For unlocking, I've seen multiple Bell posts confirming that IHOP (international house of pudding works).
I'm on my phone so I don't have the link handy, but its in the dev section...
Sent from my GT-I9000 using xda premium
guitar_east said:
Hi there, I am looking for a step by step guide for Bell users who are stock 2.3.4 and looking to root, unlock, change roms etc. The problem is, I'm currently having trouble finding this information. I am coming from a Nexus One, and then a Desire Z, where the process was much easier.
When I search around, I find conflicting ways to do this, with separate instructions for the Bell Atrix vs the other versions. I know we don't have a Bell Atrix section, and I tried searching but couldn't find anything other then this here. Can anyone confirm these are the steps to make this work?
When I figure this out I will write a definitely write a guide for us Bell users. Thanks!
Click to expand...
Click to collapse
First of all, welcome to the community of freedom and awesomeness. LOL.
What version of Android did your Bell Atrix come with?
http://forum.xda-developers.com/showthread.php?t=1136261
I don't/can't remember off top of my head if there was anything else I did besides everything explained in Pudding section, but I can confirm that those steps work.
Also, those steps mentioned in the link you provided also looks very similar and should also work.
I think I have those forums bookmarked somewhere on any of my computer, will look it up and see if I can find, I will update this post. Besides, Pudding method works. If you want to try, go ahead.
Cheers!!!
creativedevil said:
What version of Android did your Bell Atrix come with?
Click to expand...
Click to collapse
It came with stock 2.2.2, and updated with the OTA last week to the 2.3.4
I'll try the IHOP steps and put together a guide for Bell users if all goes well, thanks!
I've asked the same question too, but I've posted it on a different website. If mods here allow it since it's related to the topic, i've provided a link below. I asked this question just yesterday on Atrixforums and I put up a general list/steps as to how you can get from stock 2.3.4 Bell Atrix to be able to install custom ROMs. Can other people verify if this list is correct?
Thanks
---
Used this for rooting and confirmed works on my Bell Atrix 2.3.4: briefmobile.com/motorola-atrix-4g-root/
Made a forum thread about the steps to install custom ROMs from stock: atrixforums.com/forum/motorola-atrix-help/5590-q-verifying-steps-installing-custom-rom-onto-my-bell-atrix-2-3-4-rooted.html
---
EDIT:
I've just done this and I can confirm that this works! I now have an unlocked bootloader.
h33t said:
I've asked the same question too, but I've posted it on a different website. If mods here allow it since it's related to the topic, i've provided a link below. I asked this question just yesterday on Atrixforums and I put up a general list/steps as to how you can get from stock 2.3.4 Bell Atrix to be able to install custom ROMs. Can other people verify if this list is correct?
Thanks
---
Used this for rooting and confirmed works on my Bell Atrix 2.3.4: briefmobile.com/motorola-atrix-4g-root/
Made a forum thread about the steps to install custom ROMs from stock: atrixforums.com/forum/motorola-atrix-help/5590-q-verifying-steps-installing-custom-rom-onto-my-bell-atrix-2-3-4-rooted.html
---
EDIT:
I've just done this and I can confirm that this works! I now have an unlocked bootloader.
Click to expand...
Click to collapse
Thank you. I'll give it a shot and post my results
step by step
Hey guy, i'm on bell and this is what i did and i have had no problems.
Pt 1. http://www.youtube.com/watch?v=jPQzZOj0-BA
Pt 2. http://www.youtube.com/user/TheSmokingAndroid#p/u/4/BYM-YeSH22o
Pt 3. http://www.youtube.com/user/TheSmokingAndroid#p/u/3/CwJGetPHlzE
Pt 4. http://www.youtube.com/watch?v=IcgvglaXLyM
Pt 5. http://www.youtube.com/watch?v=CzFhKFeTBuM
Just make sure you use the right kernel for the rom.
Well, managed to get rooted, bootloader unlocked, booted into recovery, and flashed Gobstopper 2.3.4 with the fixes. It worked good. Then I figured I'd try CM7...
Didn't work out
Gave me a build.prop error. So I wiped the cache, dalvik, erased data, and did a restore (glad I did that backup).
Now, I seem to be stuck in a boot loop. Luckily, I can still access fastboot, and the recovery and such. I'll try flashing the original IHOP file again in RSD lite
* edit - that worked!
The YouTube video worked perfectly, with the exception of explianing how to root. A user posted that in this very thread, so I guess theres no need to write a guide since those video's are good.
Thanks to all who helped!
Hi All
I am looking to root the telus Galaxy 4g model T959P. I have read that the T959D can be done by doing Odin to speedmod kernel then flashing the stock telus kernel which is 2.3.3 not the 2.3.4 that I currently have. So I don't think that will work. Has anyone been successful with this and if so please share. I know I am suppose to be in the forum specific to my phone but that isn't going to happen see the link below. If someone could help me out that would be great....
http://forum.xda-developers.com/showthread.php?p=17697678#post17697678
Just as a heads up, Ive tried super 1 click 20 different ways to sunday, another guy tried Z4 Root. I have searched a lot of forums (none that actually refer to this phone since they don't exist). Google searches bring up some information but it is all foyo based nothing for gingerbread. Any developer want to take a crack at this? I'm kind of surprised there isn't even just a Telus forum here........
I sure hope im not the only one that wants to root the telus galaxy 4g
Root Telus Fascinate 4G T959P Success
Gage_Hero said:
I sure hope im not the only one that wants to root the telus galaxy 4g
Click to expand...
Click to collapse
Finally figured it out with some help, this ONLY for the Telus T959P..... follow the link, proceed at your own risk.
http://forum.xda-developers.com/showthread.php?t=1076493&page=7
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Hey everyone! So I'm very familiar with Android (running it, hacking it, etc.) but I don't know much about the Vibrant, and from the research I've done it seems kind of hacky...well really hacky. Anyways I just have a few questions before I start messing around with my girlfriend's phone; I'm just gonna list them below to make it easier. Any help would be appreciated very much of course! Thanks in advance!
1. What is going on with the model numbers/names for this phone?
Okay, so my girlfriend has a T-Mobile Samsung Galaxy S 4G (from what I found out, I believe the model number is T959V). This is still considered a "Vibrant" right? Also, will ROMs, recoveries, etc. labeled for the "T959" also work with her phone? (Since it is technically T959V)
2. Are there any Jelly Bean ROMs without the emergency calling issue?
I've been reading around about the different Jelly Bean ROMs available for the Vibrant, and can't find a general consensus about which, if any, do not have the emergency calling bug. Besides for that bug, it seems like Jelly Bean has been running pretty smoothly on the Vibrant. So is there a ROM without this bug, and what exact problem does the bug cause?
3. What are the basic steps from upgrading from Froyo to Jelly Bean?
I know this question seems more stupid than the rest, but after reading several guides, ROM installation instructions, and wikis, all of the instructions seem to say something different. I just want to know the VITAL things that I have to flash (radios, bootloaders, kernels, etc.) before I can just boot into recovery and flash a Jelly Bean ROM zip and have it boot up.
Like I said before, I hope I don't seem too needy or ignorant by posting this! I truly have done my research on this phone already, but a few things are still very unclear to me. I just want to be safe before I try to do anything to it! Also for the sake of everyone else, I wanted to avoid having to post "PLZ HELP I BROK MY FONE!1!!" in the future. So if anyone can help me out at all, or if anyone has some general tips, I would appreciate it a lot! Thanks!
P.S. I know there are quite a few guides out there, but none of the ones I could find were updated anytime recently. And that's what brings me here!
To answer your first question. T959V and T959 are not the same thing.
Roms are not interchangeable.
The T959V does have its own section here on XDA.
Toast6977 said:
To answer your first question. T959V and T959 are not the same thing.
Roms are not interchangeable.
The T959V does have its own section here on XDA.
Click to expand...
Click to collapse
Thank you very much. A mod can move this to the SGS 4G section so it's not taking up space here.
I know there are a thousand threads on Rooting/Unlocking and Custom ROM's for the Atrix, because I've spent the last 3 days reading every one I could find. However, most of them appear to be very dated and often conflicting. As I'm coming to the game a little late I was hoping for some assistance on how to proceed.
Here's what I have;
AT&T Motorola Atrix 4G (I bought this new under contract, kept it for 2 years, upgraded to another phone and this one has been a paperweight for the past 18 months) AT&T will give me an unlock code if I ask, but I'm a little confused by the conflicting reports on whether to do it this way or not.
It's an MB860
FW Version 4.5.141
OS Version 2.3.6
Baseband N_01.77.37P
Webtop WT-1.2.0-110_OLY-6
Kernel Version 2.6.32.9
Build 4.5.141
I'd like to Unlock it so I can run a Foreign SIM card, I'd like to Root it so I can add non-approved apps, and I'd like to play with some ROM's, Redpill has some very good user reviews so I'm thinking of giving it a try but I'm not stuck on it.
Obviously don't want to brick the phone, so any advice would be appreciated, the more detailed the better
I have Windows 8.1, Mac OS X, and Windows XP-SP3 computers to work with.
Thanks in advance for any assistance.
While certain threads are (or might seem) outdated and/or conflicting, there are also other threads that serve as a kind of index of the most current methods and procedures. That should help you get around. Plus there are threads and guides written especially for noobs...
Yes, the code from AT&T is the safest and simplest way to do SIM unlock. Only important point here is that the device must be running the official Moto/AT&T firmware at the time of unlock. I'm not sure what kind of "conflicting information" you came across, to my knowledge nobody who's used the code as described never had any problems.
As for rooting, regardless of the variant or firmware version of your device, the preinstall method is the one to use. By far the most universal, plus personally and generally I dislike any "automatic", "one-click" or similar methods - for me at least they are usually more trouble than they're worth.
As for playing with ROMs, you first need to unlock your BL, then install a custom recovery, and then you have a shot at ROMs. So quite a wide topic with plenty enough threads created on the subject, so no point in repeating what's already said countless times. By the time you're done with other things mentioned (SIM unlock, rooting) you should be able to find your way around.
Sequence
ravilov said:
While certain threads are (or might seem) outdated and/or conflicting, there are also other threads that serve as a kind of index of the most current methods and procedures. That should help you get around. Plus there are threads and guides written especially for noobs...
Yes, the code from AT&T is the safest and simplest way to do SIM unlock. Only important point here is that the device must be running the official Moto/AT&T firmware at the time of unlock. I'm not sure what kind of "conflicting information" you came across, to my knowledge nobody who's used the code as described never had any problems.
Click to expand...
Click to collapse
Thanks for the quick reply. I've requested an unlock code from AT&T, should be good to go in 48 hours.
In the mean time, is it important that I have it unlocked before I root, or will it matter?
Update
I realize this may seem to be off-topic but I'm not asking for assistance with this newest update, I'm only using the experience to help clarify my concerns about the Atrix.
Waiting for my requisite 24 hours before unlocking the SIM on my Moto Atrix. While I'm waiting i decided to gain a little experience by rooting a Galaxy S5570 and installing a custom Rom.
Like the Atrix there are dozens if not hundreds of threads, videos, tutorials etc for how to accomplish this. I found the most recent one I could that seemed to be a complete tutorial and it was dated from January of this year (much newer than any threads I've found on the Atrix BTW)
Rooting went fine. Confirmed with a Root Test app.
Loaded a CWM 6.0.4.5 recovery package as instructed and ended up bricking the phone. By all accounts this tutorial was for the exact model of phone with the exact same FW and Android version.
This is no big loss as it was a cheap phone that I wasn't using anyway, but it certainly opened my eyes to the risks involved in attempting this procedure on the more costly Atrix.
I'd really appreciate if anyone could point me in the direction of a current procedure for Rooting, Unlocking the Bootloader and installing a custom ROM on the Atrix with the specs from my Original Post. If any of you have the same phone and had success following a particular procedure I would greatly appreciate some links.
I know how forums work, and I know there are always the guys that reply RTFM to every noobs questions, as someone with technical skills in other areas I can generally tell the difference between someone who just doesn't want to bother doing the Due Diligence and someone who is struggling to sort through the myriad solutions to find the one that's right. I really don't want to brick this phone so any pointed advice would be greatly appreciated.
arkansascontrols said:
I realize this may seem to be off-topic but I'm not asking for assistance with this newest update, I'm only using the experience to help clarify my concerns about the Atrix.
Waiting for my requisite 24 hours before unlocking the SIM on my Moto Atrix. While I'm waiting i decided to gain a little experience by rooting a Galaxy S5570 and installing a custom Rom.
Like the Atrix there are dozens if not hundreds of threads, videos, tutorials etc for how to accomplish this. I found the most recent one I could that seemed to be a complete tutorial and it was dated from January of this year (much newer than any threads I've found on the Atrix BTW)
Rooting went fine. Confirmed with a Root Test app.
Loaded a CWM 6.0.4.5 recovery package as instructed and ended up bricking the phone. By all accounts this tutorial was for the exact model of phone with the exact same FW and Android version.
This is no big loss as it was a cheap phone that I wasn't using anyway, but it certainly opened my eyes to the risks involved in attempting this procedure on the more costly Atrix.
I'd really appreciate if anyone could point me in the direction of a current procedure for Rooting, Unlocking the Bootloader and installing a custom ROM on the Atrix with the specs from my Original Post. If any of you have the same phone and had success following a particular procedure I would greatly appreciate some links.
I know how forums work, and I know there are always the guys that reply RTFM to every noobs questions, as someone with technical skills in other areas I can generally tell the difference between someone who just doesn't want to bother doing the Due Diligence and someone who is struggling to sort through the myriad solutions to find the one that's right. I really don't want to brick this phone so any pointed advice would be greatly appreciated.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1302423
I just did it with my old A4G. No issues exist in procedure.
Motorola Atrix KCC-MB860- rom
please anyone send me a link to download rom for this model (Motorola Atrix 4G KCC-MB860- rom)
manoj panay said:
please anyone send me a link to download rom for this model (Motorola Atrix 4G KCC-MB860- rom)
Click to expand...
Click to collapse
Meanwhile you have ROMs all over the place here in the Atrix 4G section of xda that you are not going to go download, rather you are going to request a ROM for the phone instead. Head over to the development section and download a ROM instead of requesting the necessary resources that are already available to you.
Sent from my ATRIX HD using XDA Free mobile app
help me recover my phone
i downloaded and tried to flash with lots of rom.... non of them was working with this model .... please help me. . . . i was rooted and unlocked the boot loader and erased the original rom to flash the downloaded rom . . . know non of the rom in this site is working and in my phone only hardware is remaining, i mean it is not bricked , i can boot it and i can go to fastboot mode, android recovery mode, rsd mode,, atc.... actually i want suitable ram for that model so please......
my phone model: kcc-cmm-mot-w-mb860-0211 ( and all the remaining thing are written in Chinese ) it is a unlocked phone and am using in india . . .