Hey there everyone.
First of all, thanks for taking the time to help me with my minor issue.
Recently i used Check Fus and Odin 3 v1.85 to restore my GT-i9100 to stock.
This worked appart from a minor issue i am having with Samsung Kies 2.0
In my phone, my kernel version returned to [email protected]#2 (what is was before i rooted)
The baseband version is:I9100BOKD1
But the problem is, when i connect to KIES and i look at the firmware tab, it is showing complications.
This is what it says:
This device can not be updated.
Firmware Version: PDA: KE3 PHONE: KD1 CSC: KE3(kor)
Did i do something wrong?
Kies only updates if their is a later version on the server for your product code .
jje
So does that mean that the firmware listed in kies PDA: KE3 PHONE: KD1 CSC: KE3(kor) is the latest?
this is what i entered in Check Fus:
Product Code: GT-I9100HKDTNL
PDA: I9100BOKE3
CSC: I9100TNLKE3
Phone: I9100BOKD1
(Or am i because of my limited experience, seeing a problem where there is none? )
Thanks in advance ^^
KE7 latest for that info .
Not on Kies well probably due to no longer having the firmware the phone came with and codes match nothing on Kies server .
Kies updates original firmware . Stock firmware upgrade from Kies Never happened for me and as far as i am aware its not meant to . But some say it will .
jje
Ganon202 said:
So does that mean that the firmware listed in kies PDA: KE3 PHONE: KD1 CSC: KE3(kor) is the latest?
this is what i entered in Check Fus:
Product Code: GT-I9100HKDTNL
PDA: I9100BOKE3
CSC: I9100TNLKE3
Phone: I9100BOKD1
(Or am i because of my limited experience, seeing a problem where there is none? )
Thanks in advance ^^
Click to expand...
Click to collapse
You used wrong product code. It should be GT-I9100LKATNL and that is the latest firmware for that region.
Related
I was looking for a procedure to backup my italian ROM.
My product code is GT-I9100LKATIM and i would like to debrand my phone to GT-I9100LKAITV, but i'd like to backup it before flashing.
Is there a guide in xda?
Thank you very much
Type in *#1234# on the dial pad and post the details that comes up on the screen exactly as they appear.
Intratech said:
Type in *#1234# on the dial pad and post the details that comes up on the screen exactly as they appear.
Click to expand...
Click to collapse
phone: I9100XXDJ
pda I9100AIKE1
csc: I9100TIMKE1
Same for me. I'd like back up my stock rom:
PDA: XWKE2
Phone: XXKDJ
CSC: BOGKD3
Thanks in advance.
ru5t said:
phone: I9100XXDJ
pda I9100AIKE1
csc: I9100TIMKE1
Click to expand...
Click to collapse
vanessa13006 said:
Same for me. I'd like back up my stock rom:
PDA: XWKE2
Phone: XXKDJ
CSC: BOGKD3
Thanks in advance.
Click to expand...
Click to collapse
Are these carrier firmware? Neither of them are on the firmware server.
EDIT: Vanessa I'm downloading your version now. Will link it in the dev forum.
anyone have a link or instructions on how to backup stock rom? I want to back up my stock rom before i root/update it. This is a precaution if i need to return it back for warranty purposes.
thanks
Hmm,
do mine too
PDA - XWKE2
PHONE - XXKDJ
CSC - PSKE3
hey iam from austria, on 3 ( three, hutchinson)
PDA: XWKE1
PHONE: NEKD5
CSC: DREKD3
i want to have files in some bad case to backup to the stock...
and what heppens when i flash only the insecure kernel.. i get root and insecure kernel.. but then when i flash back KE1 stock kernel... ist stock secure kernel with root? am i right?
all csc settings are still on phone?
when i want to unroot i will need just to flash with odin KE1 one more time?
please help
Maybe this could help:-
Europe Samsung I9100 Firmwares.
http://www.samfirmware.com/WEBPROTECT-i9100.htm
Hi,
It looks like the *#1234# method does not always show the real version of the firmware that is installed.
To get detailed data you have to install Kies_2.0.0.11044_11_3.exe which you can find here:
http://www.samsungapps.com/about/onPc.as
Or directly here:
http://org.downloadcenter.samsung.c...5/20110521192620273/Kies_2.0.0.11044_11_3.exe
After you install it you have to start it up and connect your SG2.
Please wait until Kies connects successfully.
Now you have to open/run regedit (e.g. "Windows-Key" + "R" to open run dialog and then type "regedit").
Go to "HKEY_CURRENT_USER\Software\Samsung\Kies\DeviceDB\1".
Here you will find the "HIDSWVER" key with the original versions.
The "ProductCode" key is also important in order to help Intratech to get the original Brand ROM.
For example this is the information you should send Intratech when asking for ROMs:
Carrier: Entel PCS Chile
*#1234#
PDA: I9100UHKD7
PHONE: I9100UHKD7
CSC: I9100CHEKD7
Build date: May 4 2011
[HKEY_CURRENT_USER\Software\Samsung\Kies\DeviceDB\1]
"HIDSWVER"="I9100UHKE1/I9100CHEKE1/I9100UHKE1/I9100UHKE1"
"ProductCode"="GT-I9100LKLCHE"
Click to expand...
Click to collapse
Do it yourself:
On the other hand you can do it also by yourself using "Check Fus Downloader" from LuffarJoh:
http://forum.xda-developers.com/showthread.php?t=1032437
Here you can find the executable:
http://fus.nanzen.se/
Or directly here:
http://www.nanzen.se/download.php?id=9
You have to copy the FusCipherUtil.dll from your Kies installation (e.g. C:\Program Files (x86)\Samsung\FusCipherUtil.dll ) to the same directory as the "Check Fus Downloader".
Then you have to run "Check Fus Downloader" and set the following in the "Firmware Info" section for the above Entel PCS Chile example:
Product Code: GT-I9100LKLCHE
PDA: I9100UHKE1
CSC: I9100CHEKE1
Phone: I9100UHKE1
In the "Choose a firmware" section you have to select "GT-I9100".
Then click the "Check firmware" button.
In the example test case you will see a successful message in the "Result" section that offers you a "Download this firmware" button.
rudolf895 said:
Maybe this could help:-
Europe Samsung I9100 Firmwares.
http://www.samfirmware.com/WEBPROTECT-i9100.htm
Click to expand...
Click to collapse
zyxeu said:
Hi,
It looks like the *#1234# method does not always show the real version of the firmware that is installed.
To get detailed data you have to install Kies_2.0.0.11044_11_3.exe which you can find here:
http://www.samsungapps.com/about/onPc.as
Or directly here:
http://org.downloadcenter.samsung.c...5/20110521192620273/Kies_2.0.0.11044_11_3.exe
After you install it you have to start it up and connect your SG2.
Please wait until Kies connects successfully.
Now you have to open/run regedit (e.g. "Windows-Key" + "R" to open run dialog and then type "regedit").
Go to "HKEY_CURRENT_USER\Software\Samsung\Kies\DeviceDB\1".
Here you will find the "HIDSWVER" key with the original versions.
The "ProductCode" key is also important in order to help Intratech to get the original Brand ROM.
For example this is the information you should send Intratech when asking for ROMs:
Do it yourself:
On the other hand you can do it also by yourself using "Check Fus Downloader" from LuffarJoh:
http://forum.xda-developers.com/showthread.php?t=1032437
Here you can find the executable:
http://fus.nanzen.se/
Or directly here:
http://www.nanzen.se/download.php?id=9
You have to copy the FusCipherUtil.dll from your Kies installation (e.g. C:\Program Files (x86)\Samsung\FusCipherUtil.dll ) to the same directory as the "Check Fus Downloader".
Then you have to run "Check Fus Downloader" and set the following in the "Firmware Info" section for the above Entel PCS Chile example:
Product Code: GT-I9100LKLCHE
PDA: I9100UHKE1
CSC: I9100CHEKE1
Phone: I9100UHKE1
In the "Choose a firmware" section you have to select "GT-I9100".
Then click the "Check firmware" button.
In the example test case you will see a successful message in the "Result" section that offers you a "Download this firmware" button.
Click to expand...
Click to collapse
thx for reply but i cant find my stock ROM..
but who is Intratech?
my phone info is...
Carrier: 3 Austria (Three,Hutchinson)
PDA: I9100XWKE1
PHONE: I9100NEKD5
CSC: I9100DREKD3
Buid date: May 3 2011
HIDSWVER: I9100XWKE1/I9100DREKD3/I9100NEKD5/I9100XWKE1
ProductCode: GT-I9100LKADRE
can some one give me link where to find stock files...
thx
milance86 said:
thx for reply but i cant find my stock ROM..
but who is Intratech?
my phone info is...
Carrier: 3 Austria (Three,Hutchinson)
PDA: I9100XWKE1
PHONE: I9100NEKD5
CSC: I9100DREKD3
Buid date: May 3 2011
HIDSWVER: I9100XWKE1/I9100DREKD3/I9100NEKD5/I9100XWKE1
ProductCode: GT-I9100LKADRE
can some one give me link where to find stock files...
thx
Click to expand...
Click to collapse
For some reason 3 Austria have not authorised the release of the firmware on FUS so it's now available to download.
Can you tell me if this firmware is anywhere available -/ should be a non-branded EU FW, isnt it?
PDF: I9100XWKE2
PHONE: I9100XXKDJ
CSC: I9100ATOKD1
Build Info: Fri May 6 07:48:55 KST 2011
netrider01 said:
Can you tell me if this firmware is anywhere available -/ should be a non-branded EU FW, isnt it?
PDF: I9100XWKE2
PHONE: I9100XXKDJ
CSC: I9100ATOKD1
Build Info: Fri May 6 07:48:55 KST 2011
Click to expand...
Click to collapse
I'll upload it after I get in later.
Would be great thx in advance!
Could use this to go back to my stock if sth happens to my device.
Yes.
10 char
Ok, getting it uploaded now. Link will be posted in the thread in the dev forum.
edit: Now available under the XWKE2 section for download in the firmware thread.
Great work! THX A LOT!
Have you done mine too?
Carrier: Optus Australia
PDA - XWKE2
PHONE - XXKDJ
CSC - PSKE3
+1 for the optus australia
thanks
Hi,
I'm new to Android and Galaxy S2. My phone was purchased in Spain from Vodafone.
I have just upgraded my ROM as per Intratech's guide (thanks by the way for the nice gude). The upgrade went good but after upgrae Kies shows the old CSC and says it can't update. Is this expected? I thought the CSC was supposed to change to the generic one.
I used ROM XWKE7 from the guide. After upgrade I get the following:
Doing *#1234#, I get:
PDA: I9100XWKE7
PHONE: I9100XXKE4
CSC: I9100XEUKD1
Doing *#272*<your IMEI>#, I get
ATL
In Kies it shows:
PDA: KE7 / PHONE: KE4 / CSC:KD1(ATL)
- Can someone please clarify?
- I'd also like to know if after this I still have to do something else to unlock the phone to use with a different provider.
- I was hoping to leave the phone as unbranded so future updates will be picked up through Kies.
Thanks in advance for your help.
nicolas2011 said:
Hi,
I'm new to Android and Galaxy S2. My phone was purchased in Spain from Vodafone.
I have just upgraded my ROM as per Intratech's guide (thanks by the way for the nice gude). The upgrade went good but after upgrae Kies shows the old CSC and says it can't update. Is this expected? I thought the CSC was supposed to change to the generic one.
Depends upon what CSC flashed their is no generic CSC .
I used ROM XWKE7 from the guide. After upgrade I get the following:
Doing *#1234#, I get:
PDA: I9100XWKE7
PHONE: I9100XXKE4
CSC: I9100XEUKD1
Doing *#272*<your IMEI>#, I get
ATL
In Kies it shows:
PDA: KE7 / PHONE: KE4 / CSC:KD1(ATL)
- Can someone please clarify?
- I'd also like to know if after this I still have to do something else to unlock the phone to use with a different provider.
Debranding is not unlocking .
- I was hoping to leave the phone as unbranded so future updates will be picked up through Kies.
Kies updates branded phones .
CSC
http://forum.xda-developers.com/showthread.php?t=1075278
Spoof FW
http://forum.xda-developers.com/showthread.php?t=1110160
jje
Click to expand...
Click to collapse
Thanks very much for this info. At the end I did a factory reset after updating and now phone shows XEU as expected.
Hello!
I just bought the S2 White, and it's on 2.3.3.
I tried to update the software from phone, but it says, "No new updates".
I connected the phone to KIES (Windows 7 Home Premium x64),
& it says, "GT-I9100 does not support firmware upgrade."
PDA: KE7
PHONE: KE4
CSC: KD1(H3G)
Can someone help me please to update it ???
(I don't understand why KIES says that my phone does not support firmware upgrade :S)
Maybe it has been flashed an unsupported version firmware.
Anyway you can upgrade to any firmware you want throught odin.
Look in the forum for a guide how to flash with odin
Guide
http://forum.xda-developers.com/showthread.php?t=1125282
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
mustafa.millwala said:
"GT-I9100 does not support firmware upgrade."
PDA: KE7
PHONE: KE4
CSC: KD1(H3G)
Click to expand...
Click to collapse
It says it cannot be updated because your firmware is mixed for some reason, latest H3G is:-
PDA: I9100XWKI4
PHONE: I9100NEKI1
CSC: I9100H3GKI1
faill debrand!!flash again!
Inviato dal mio GT-I9100 usando Tapatalk
I had a similar problem. Then updated Kies and it said that it's not possible to update my firmware!
I went to the thread with the stock firmwares. Chose the current UK 2.3.4 firmware and flashed via Odin. Totally painless and very straightforward. Then checked on my phone for software updates, non available and checked via Kies and says my firmware is up to date.
This seems to have corrected the problem.
People still use Kies?
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Odia said:
It says it cannot be updated because your firmware is mixed for some reason, latest H3G is:-
PDA: I9100XWKI4
PHONE: I9100NEKI1
CSC: I9100H3GKI1
Click to expand...
Click to collapse
Just looked through the guides for doing this and I can only seem to see stuff for Vodafone, 3, O2 etc. I've got an unlocked S2 that I think is running out of date software and thought I would try updating manually as Kies is telling me my phone does not support updates lol. Mine is running:
PDA: I9100XWKF3
PHONE: I9100XXKE7
CSC: I9100XEUKD1
So is my software out of date and if so how can I update it please?
chanandler;18142028
PDA: I9100XWKF3
PHONE: I9100XXKE7
CSC: I9100XEUKD1
So is my software out of date and if so how can I update it please?[/QUOTE said:
Guide
http://forum.xda-developers.com/showthread.php?t=1125282
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
Click to expand...
Click to collapse
OK so I have found the custom ROM for my S2 but what is the point of putting the same one back on there that is already running? The question I had was 'what is the latest version and how do I install that?'
The reason for all this by the way is that I am sick of the poor battery life of the phone and have been told that the latest version of the software improves it but unfortunately Kies seems to think that my phone is not able to be upgraded!
Are you on OS X by any chance?
chanandler said:
Just looked through the guides for doing this and I can only seem to see stuff for Vodafone, 3, O2 etc. I've got an unlocked S2 that I think is running out of date software and thought I would try updating manually as Kies is telling me my phone does not support updates lol. Mine is running:
PDA: I9100XWKF3
PHONE: I9100XXKE7
CSC: I9100XEUKD1
So is my software out of date and if so how can I update it please?
Click to expand...
Click to collapse
Your versions are valid XWKF3 XEU, and it should update to:-
PDA: I9100XWKI4
PHONE: I9100XXKI1
CSC: I9100XEUKH2
If Kies says it cannot be updated your product code is probably wrong.
Hello,
Kies give me the same message "GT-I9100 does not support firmware upgrade."
and shows these versions on my S2,
PDA: KF3
PHONE: KE4
CSC: KF3(INU)
It shows the same as the latest firmware versions just below.
Does anyone know when these above versions were released ?
lol I know its possible to update, but whats wrong with kies
scottishlad80 said:
People still use Kies?
Click to expand...
Click to collapse
I always use Odin to flash firmwares, but on one occasion I used Kies
but that takes too long
Won't be doing that again in a rush!
Hey.
I have Galaxy S2 with following versions:
PDA: BUKE5
Phone: BUKE1
CSC: VDCKE1
I want to upgrade to :
XXKI3
Android 2.3.5
This original (unmodified) Wipe Package with new bootloader has: PDA: XXKI3| Modem/phone: XXKI3| CSC: OXAKI3
Click to expand...
Click to collapse
How does this firmware affect me? After i do the upgrade can I downgrade to my original firmware and CSC ?
Thanks.
Cristitamas said:
Hey.
I have Galaxy S2 with following versions:
PDA: BUKE5
Phone: BUKE1
CSC: VDCKE1
I want to upgrade to :
How does this firmware affect me? After i do the upgrade can I downgrade to my original firmware and CSC ?
You can downgrade but why upgrade if you are going to downgrade .
CSC is only Country specific network settings they can be entered manually .
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Click to expand...
Click to collapse
Hello,
I have a Samsung Galaxy S2 i9100 phone and I cannot upgrade to ICS. I tried the official upgrade option in the phone, it says no upgrade available.
I also tried Kies but it says that my phone does not support software upgrades via Kies.
My phone info:
PDA: KF3
Phone: KF1
CSC: KF2 (ARB)
Any help?
Thanks !
JakeFoster said:
Hello,
I have a Samsung Galaxy S2 i9100 phone and I cannot upgrade to ICS. I tried the official upgrade option in the phone, it says no upgrade available.
I also tried Kies but it says that my phone does not support software upgrades via Kies.
My phone info:
PDA: KF3
Phone: KF1
CSC: KF2 (ARB)
Any help?
Thanks !
Click to expand...
Click to collapse
Maybe you have to change the CSC code by typing *#272*Device IMEI#
but be attention it will do factory reset
JakeFoster said:
Hello,
I have a Samsung Galaxy S2 i9100 phone and I cannot upgrade to ICS. I tried the official upgrade option in the phone, it says no upgrade available.
I also tried Kies but it says that my phone does not support software upgrades via Kies.
My phone info:
PDA: KF3
Phone: KF1
CSC: KF2 (ARB)
Any help?
Thanks !
Click to expand...
Click to collapse
Please dial *#1234# and post the exact result. You could also use Check Fus just to see what it suggests your latest firmware should be.