hey guys, im trying to flash the miui 1.6.24 rom onto my 2.2 fascinate. ive tried twice now and everytime i i try and flash, it starts the download for about 5 seconds, then just keeps rebooting the phone and says cant mount and does a countdown from 20 then reboots and repeats. i have had to odin back to stock 3 times already from this. any ideas why this is not working? and how can i get it to work? Thanks in advance
Have you read how to flsh to the cm7 & miui thread. Make sure you have the correct kernal, gapps and recovery. I think that is why you maybe getting stuck. Be sure to read how to get back to other roms if you choose to go back.
gotsflat4love said:
Have you read how to flsh to the cm7 & miui thread. Make sure you have the correct kernal, gapps and recovery. I think that is why you maybe getting stuck. Be sure to read how to get back to other roms if you choose to go back.
Click to expand...
Click to collapse
no i cant find that thread. the only one i can find is the how to go from cm7 or miui to another rom. but im trying to do the opposite
it just keeps saying "waiting for SD Card to mount" and counts down. then just keeps repeating
Can anybody help me?
I came from Nameless v4.1 and have a thread in Q and A that answers this but I'll tell ya how, it's basically the same steps since I odined back to stock.
Make sure that you have Andmer's latest miui build on the root of your SD card. Then assuming you already use the latest recovery (I had time's blue recovery) , wipe the big 3 (data, cache, delvik) > install from SD card > choose the miui rom > have a little patience > profit.
For me it did the count down 4 times before it actually mounted and finished the install. I don't know if the size of the SD card effects it in any way, concidering I'm only using a 4g, but it may take awhile. Again these are the steps I took and I haven't had any problems other than the one's already stated.
Sent from my miui fascinate using XDA Premium App
Yeah when it was doing the countdown I let it go before for about a half hour and it still list kept doing it and I had to Odin back to stock again. I didn't have the rom on the root of the SD card, I had it in a folder entitled root that I put all my roms on. I don't know if that would really make a difference
To be honest I'm not entirely sure. I've always put it on the root of the sd card. I guess at this point it wouldn't hurt to try. And again I'm not sure if the size of the card comes into play considering I'm using just a 4g card and not my stock 16g. Maybe someone else with more experience and overall know how can chime in to help. Sorry if I couldn't be of any help.
Sent from my miui fascinate using XDA Premium App
Maybe a bad d/l ?
I just switched to cm7 from miui then back and had no issues
Try redownloading
Sent from my MIUI Fascinate XDA App
Yeah I'm not using the stock card either. I'm using a 2gb Samsung and a 8gb sandisk. And I don't think its a bad download cuz I've tried doing it with all 3 versions of miui and it did it to all of them and the new cm7 and the cm7/miui kernel. I could get the old cm7 but when trying to flash the new one I get the countdown
I just tried again and let it do the countdown for a half hour so it tried about 40 times to mount the card. Any other suggestions?
I'm also needing a bit of advice on how to install MIUI on my Fascinate...
http://forum.xda-developers.com/showthread.php?t=1139400&highlight=AOSP+Gingerbread
Trying to install that. Downloaded the packages, but not sure what to do from there. I was going to load them into ODIN, but realized they aren't regular tar.gz packages...can I just load it with ROM Manager or what? I'm currently on 2.2.1, "Super Clean version 2.9 - EB01/EC16 Froyo leak root+Froyo Clockworkmodwith MALWARE protection".
Not to hijack, but seems we have similar questions.
You need to load in CWM, ROM manager is not compatible with the newer roms
MIUI 1.7.1 error 7
GuitarrassDeAmor said:
I'm also needing a bit of advice on how to install MIUI on my Fascinate...
http://forum.xda-developers.com/showthread.php?t=1139400&highlight=AOSP+Gingerbread
Trying to install that. Downloaded the packages, but not sure what to do from there. I was going to load them into ODIN, but realized they aren't regular tar.gz packages...can I just load it with ROM Manager or what? I'm currently on 2.2.1, "Super Clean version 2.9 - EB01/EC16 Froyo leak root+Froyo Clockworkmodwith MALWARE protection".
Not to hijack, but seems we have similar questions.
Click to expand...
Click to collapse
Yeah trying to load MIUI 1.7.1 also and keep getting the error 7. Do we have to do it through odin?! cleared data, cache and dalvik, still no go. Did putting it in root make a difference? why cant it just work like the other roms lol! Sorry for taking your Thread away kendall316!
Thanks in advance if anyone figures it out! if i do, will post it.
Related
So i rooted my phone and installed clockwork rom manager and downloaded nero v3_voodoo.zip and put it on my phone..boot into recovery mode and now i get
--Installing: SDCARD:/Nero_3_voodoo.zip
Finding update package...
Opening update package...
Installing update...
and it stays like this for hours.
Thank You
Which rom/ version are you coming from? Can you boot up normally, not in recovery?
Sent from my SGH-T959 using XDA App
you rebooted into ClockWorkMod Recovery, right?
@Fearless yes.
@jrod from stock and yes i can boot up phone and it works normally it just doesn't flash the new rom
Weird
I want to say that I had this problem @ one point. I think I downloaded a new copy of the ROM. Sometimes the download get corrupted at one point or another. Have you hit boards.teamwhiskey.com? or head to the IRC chat channel? they have a GREAT support community.
I really hope you ran a titanium backup, or else you will loose all apps. I really suggest springing for the paid version, because the restore is only one click.
ok...try re-downloading the ROM again and see if that works
@led Thank You!
@fearless
Downloaded update.zip to root phone did that blah installed clockwork mod app granted superuser always, clicked flash clockwork did that, copied nerov3 onto sd card opened clockwork selected reboot into clockwork recovery once in recovery i selected the zip i wanted to update to which was nerov3voodo.zip clicked yes and it finds and opens it fine just soon as it hits installing it gets hung up for a long time hours so i just pull out the battery and boot back up to normal android with root
Im not 100% positive if this is required or not but when I flash a rom I always start from stock rom, then use samsung mini kies to update to Ji6, then flash the rom of ur choice. I did nero v3 that way too.
Sent from my SGH-T959 using XDA App
I did the same as jrod after a soft brick recently....
mac
is there kies mini for osx?
Ur gonna have to research a lil cuz it wasn't easy to find, at least for me it wasn't lol and im not sure if there is kies for osx. Again im not sure if this routine will fix ur problem I just know it never fails for me. The one time I did flash straight from stock rom, it was a different rom (not nero) and it worked but it seemed real buggy. I say this cuz I flashed the same rom twice, once from stock JFD and once from JI6. Coming from JI6 seemed much smoother
Sent from my SGH-T959 using XDA App
cgol92 said:
Downloaded update.zip to root phone did that blah installed clockwork mod app granted superuser always, clicked flash clockwork did that, copied nerov3 onto sd card
Click to expand...
Click to collapse
Wait a minute, the way I'm reading this Nerov3 was on the SD card and not the root of the phone?
If that's the case both update.zip and nerov3.zip have to be on the 16g root memory of the phone, not the SD card.
I can't install the ROM. I keep getting an error. It says:
E: Failure at line 12:
copy_dir PACKAGE:data DATA:
Installation aborted.
Any ideas why???
bLaZe412 said:
I can't install the ROM. I keep getting an error. It says:
E: Failure at line 12:
copy_dir PACKAGE:data DATA:
Installation aborted.
Any ideas why???
Click to expand...
Click to collapse
Let's back up blaze. We need the who what where when and why before we can help you.
Sent from my SGH-T959 using XDA App
jrod33084 said:
Let's back up blaze. We need the who what where when and why before we can help you.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Haha aite. Ima fill u in. But it might be a difficult to follow, lol:
1) I began by installing the custom ROM "[ROM] Vibrant AOSP ish JK2 1.1 Official FROYO". I had done the back-ups with Clockwork Mod and whatnot. And I also installed the BusyBox.
2) So I successfully installed the custom ROM. However, I read that there was an issue with SD Card's not working??? So I found the .zip file that fixes it and I put it on my SD Card. I then launch into Clockwork Mod, but it freezes on the Vibrant screen. It just boot loops. So I guessed I bricked it.
3) I try numerous times to ODIN it back to stock. It somewhat worked. However, after the Galaxy S screen, it just turns black and nothing loads. Like the interface doesn't show up.
4) I then restore it to a previous state through Recovery. But now, the SD card issue is still present. Like, I can't update/download any apps.
5) I find NERO v3 and I put it on my SD Card. I boot into recovery, and try to install it through there.
6) As I try to install it I get that,
"E: Failure at line 12:
copy_dir PACKAGE:data DATA:
Installation aborted." message.
IF ANYONE CAN PLEASE HELP ME, IT WOULD BE GREAT!!!! Lol.
Hi guys so i planned to upgrade my samsung galaxy to custom rom 2.2. i will appreciate if someone can please tell me that which is the best and stable custom rom for Tmobile Samsung Galaxy S Vibrant (US) Version. i heard that Nero v3 with voodoo lagfix is the best so far. Please correct me if i am wrong. Thanks
bLaZe412 said:
Haha aite. Ima fill u in. But it might be a difficult to follow, lol:
1) I began by installing the custom ROM "[ROM] Vibrant AOSP ish JK2 1.1 Official FROYO". I had done the back-ups with Clockwork Mod and whatnot. And I also installed the BusyBox.
2) So I successfully installed the custom ROM. However, I read that there was an issue with SD Card's not working??? So I found the .zip file that fixes it and I put it on my SD Card. I then launch into Clockwork Mod, but it freezes on the Vibrant screen. It just boot loops. So I guessed I bricked it.
3) I try numerous times to ODIN it back to stock. It somewhat worked. However, after the Galaxy S screen, it just turns black and nothing loads. Like the interface doesn't show up.
4) I then restore it to a previous state through Recovery. But now, the SD card issue is still present. Like, I can't update/download any apps.
5) I find NERO v3 and I put it on my SD Card. I boot into recovery, and try to install it through there.
6) As I try to install it I get that,
"E: Failure at line 12:
copy_dir PACKAGE:data DATA:
Installation aborted." message.
IF ANYONE CAN PLEASE HELP ME, IT WOULD BE GREAT!!!! Lol.
Click to expand...
Click to collapse
Ok ur right that was alot to follow lol. Ur gonna have to start all over and odin back to stock. Make sure you have both the right ....512.pit file that goes next to the PIT selection in odin , obviously. And the ....jfd.tar file that goes in the pda selection. Check the repartition box also. Let odin and the phone do its thing. It usually will sit on the galaxy s screen for a couple minutes. Did you have any lag fixes installed? If so I hope you disabled them first
Sent from my SGH-T959 using XDA App
adiprince1 said:
Hi guys so i planned to upgrade my samsung galaxy to custom rom 2.2. i will appreciate if someone can please tell me that which is the best and stable custom rom for Tmobile Samsung Galaxy S Vibrant (US) Version. i heard that Nero v3 with voodoo lagfix is the best so far. Please correct me if i am wrong. Thanks
Click to expand...
Click to collapse
Depends what ur looking for. The newest and reputable ones are nero v3 and axura 2.2.5.7. Nero is a lil more stable but not by much. Axura is a lil more snappier/faster but also not by much. Both are themed specifically to the makers choice so its ur call which to go with. Without customizing anything I like neros theme better but after I flashed blackfroyo to axura I loved it. Also it seems that nero is more customizable but that could be cuz axura just came out a few days ago. So its ur call. Try em both out. I did. Give one a couple days then the other so you can really wee the positives and negatives. DONT forget to disable voodoo if you try multiple roms
Sent from my SGH-T959 using XDA App
jrod33084 said:
Ok ur right that was alot to follow lol. Ur gonna have to start all over and odin back to stock. Make sure you have both the right ....512.pit file that goes next to the PIT selection in odin , obviously. And the ....jfd.tar file that goes in the pda selection. Check the repartition box also. Let odin and the phone do its thing. It usually will sit on the galaxy s screen for a couple minutes. Did you have any lag fixes installed? If so I hope you disabled them first
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Yeah, I have the *True Stock* files for ODIN. I can get ODIN to do its job, but it doesn't load anything after the Galaxy S screen. Hmmm....perhaps it is the lag switch. How do I disable it?
bLaZe412 said:
Yeah, I have the *True Stock* files for ODIN. I can get ODIN to do its job, but it doesn't load anything after the Galaxy S screen. Hmmm....perhaps it is the lag switch. How do I disable it?
Click to expand...
Click to collapse
You have to disable the lag fix before you start flashing. Which lag fix do you have?
Sent from my SGH-T959 using XDA App
I've always had horrible timing with things. I finally got the guts to root and get SuperClean 2.8 onto my phone, and the next day 2.9 is out. Awesome. XD
Anyways, for the question. How do I go about flashing 2.9 over my current 2.8? Do I do it through ODIN, or can I put it on my SD card and install updates through recovery? And I know there was an issue with flashing 2.8 straight over 2.7, does anyone know if there's a similar problem with this one? A step-by-step would be great, but if not then pointing me in the right direction would be awesome.
I flashed 2.9 over 2.8 through the recovery, no problem. No wiping or anything...it did get rid of some other things I had flashed but I simply went back into recovery and re-flashed all my stuff like the MIUI music app and Windows Phone notifications, etc.
Everything should be fine.
Just download the zip from the thread, boot into recovery, and choose install zip from SD card.
Oh and be prepared to be freaked out when your phone starts talking to you on its first boot.
I flashed 2.9 over 2.8 through the recovery, no problems to report so far. I didnt wipe data but i did wipe cache 3 times and davlik 3 times before i flashed SC2.9 zip.
Might not have to do that but so far i have followed this rule that i was told a few weeks back and so far no issues.
Will it still say "install update.zip", or should it say the actual name of the SC2.9 zip file? Because mine says update.zip, so I'm assuming something is missing >.>
Also, I'm not seeing where to wipe dalvik cache...
To install SC 2.9 you just need to place it on your sd card. Boot into recovery (wipe cache) and install zip from sd.
To wipe dalvik cache you need to go into the advanced setting in recovery.
Sent from my SCH-I500 using XDA App
First, are you running voodoo or non-voodoo? Will you be flashing voodoo over voodoo, over nv or nv over voodoo? Makes a difference.
im trying to flash in rom manager and its saying that cwm 3.0 is not supported for updating or something like that. anyone else have that problem?? or am i just doing something stupid
cwm 3 does not support what you are trying to do. Need to get the old red for all on there. Let me look for a link.
ETA: Here you go: http://forum.xda-developers.com/showthread.php?t=942021
thank you thank you. worked great. let me tell you how fun it is having to use a 7 year old pc to odin... there needs to be a mac version
dklemp said:
thank you thank you. worked great. let me tell you how fun it is having to use a 7 year old pc to odin... there needs to be a mac version
Click to expand...
Click to collapse
you are a lucky man or smart man
you asked before you jumped
To preface this, I have followed all instructions to a T in all threads related to this, so here goes.
I was running CM7 test 7 and all was well, then I updated to build 8 and still ok but no call audio so I flashed the .13 OTB kernel and the phone began to bootloop. I have since been unable to reinstall CM7 and have ODIN flashed the EB01 official and the Atlas .pit probably 10-12 times through the whole cycle to try and reinstall.
Now that I have given up on that I followed the steps to return to UKB 2.1 and after flashing everything booted fine but my touchscreen would not work...so, back to stock again and I have stayed there........but
Now every time I reboot I have to reinstall all my apps(they are still installed but force clse immediately), none of them save any settings or data when I exit and return to them and my launcher is throwing out "Unknown data error" in notifications every time I boot. It also resets all homescreen and system settings to default at each reboot and has to resync all contacts also.
I am hoping that someone can help we with this and that I have not flashed this thing to its breaking point and am totally screwed. Someone have mercy and know something...and yes, I have searched and have found a few threads on the subject but none with any answers.
thanks I hope
If you have most of your contents from your sd backed up on your pc and you have a spare sd card I would try putting your spare one in, put com rom on it and TiBu on it as well
Odin recovery, wipe data/cache/dalvik.. voltage settings too if your recovery has that option
flash ukb 2.0 reboot completely and do the 2.1 patch
I'm not a dev, nor do I know if this will fix anything but I went to cm7 a while back before deep sleep was fixed and when I went back to com rom to hold me over I noticed even after doing the atlas 2.2 and eb01..i still had a bunch of cm7 files on my sd card and it (ukb) was rather glitchey compared to before I tried cm7...i don't think that these can conflict with anything on the rom but if you have a spare sd what's it gonna hurt you said you've flashed/ repartitioned multiple times..what's once more!
If you can't get it fixed I would just go to the newest cm7 its just about perfect, the bugs in it are minor..imo...good luck!
Sent from my SCH-I500 using XDA App
I've got everything up and running with stock once more and everything seems to be good finally.
Honestly after all this I'm a bit hesitant to flash CM7 lol. I may a suit on it for a couple days and decide. Thanks
Sent from my SCH-I500 using XDA Premium App
In the future, I would try the ext4 format utility from navenedrob right after you've returned to stock & before you flash any custom rom. It formats all partitions & may fix something overlooked by odin.
Sent from my SCH-I500 using XDA App
Allright, so there I was, running a rather stable Comm Rom 2.0 Voodoo Rom with the ED10 Kernel/Radio, and then I saw the thread on the OMFGB GB release, that I, of course, just HAD to have...
So, my first mistake was being impatient and not being able to find any installation notes, and pretending that I knew what I was doing by installing the rom via CWM mod.
Here's the rub, for some reason, whenever I did the 3 finger salute, it would pull a RED CWM that went orange when I applied update.zip ... because if I tried to install rom from sd card with the initial CWM boot, it wouldn't install anything, it would just error out unless I applied update.zip. After selecting apply update from zip, it would boot the orange CWM and allow me to install whatever I wanted...
So after applying the OMFGB rom, it showed the Fascinate/ Cyanogenmod 7 bootscreen, then went to boot loop. I panicked, pulled the battery, then backed up everything to my computer, and formatted the sd card in FAT32 with Windows 7 64 bit...
Shortly thereafter, I was using ODIN and the original "return to stock" files, and ended up getting into the stock OS.
Now I never show 3G or even 1x, and never pull data at all... when I go to place calls, it says that verizon cannot authenticate my phone... when I activate, it reboots and says everything was successful, but was noticeably a faster process than standard activation. Upon reboot, nothing improves... the os is there, everything shows that everything is fine, yet I am still not able to place calls...
Here is where it gets weird... My wife called me today, and the call came through... I received text messages, but still couldn't make calls... My bill is zeroed out, I'm not locked out that I know of, and I just want my phone working again...
Running out of ideas. I have flashed ED01 DL01 and even reapplied the stock .PIT in odin... I am going to try heimdall while I wait for help from here, but any quick help would be GREATLY appreciated...
I believe the issue is you need to convert your system to mtd before flashing omfgb...some one correct me if I'm wrong though as I don't want to spread false info.
but Try installing jt's 0704 cm7 build following his instructions, then install his 0713 build (possible unnecessary step but it worked for me), then flash omfgb. You will most likely have to flash jt's fixed cwm to subsequently flash his cm7 as I had to since I was coming from a stock restore. And now I'm running a blazing fast omfgb...I was able to restore all my apps and data in half the time it took on com rom...good luck let me know how it goes
Sent from my SCH-I500 using XDA App
riceje7 said:
I believe the issue is you need to convert your system to mtd before flashing omfgb...some one correct me if I'm wrong though as I don't want to spread false info.
but Try installing jt's 0704 cm7 build following his instructions, then install his 0713 build (possible unnecessary step but it worked for me), then flash omfgb. You will most likely have to flash jt's fixed cwm to subsequently flash his cm7 as I had to since I was coming from a stock restore. And now I'm running a blazing fast omfgb...I was able to restore all my apps and data in half the time it took on com rom...good luck let me know how it goes
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I will definately take this into consideration, but first i want to confirm that my phone is in full working order...
I appreciate the quick response, and hope to get some more love from the community.
Sent from my Transformer TF101 using XDA Premium App
sounds like your modem may be messed up
this is what i would do:
1) Odin this it is an "Stock" ED01 DB/DO
http://www.multiupload.com/9JSTWA6Y6L
LET IT BOOT FULLY
2) flash the CWM in the OP of CM7
3) Do all Wipes then Flash CM7 0704
let boot fully
USE the Shutdown menu to get to orangeCWM
4) Do all Wipes then flash CM& 0713
let boot fully
USE the Shutdown menu to get to orangeCWM
5)Flash OMFGB
pull battery & 3 finger salute to redCWM
6) Do all Wipes then re-Flash CM7 0704
reboot and bingo you are at OMFGB
xwhofarted said:
sounds like your modem may be messed up
this is what i would do:
1) Odin this it is an "Stock" ED01 DB/DO
http://www.multiupload.com/9JSTWA6Y6L
LET IT BOOT FULLY
2) flash the CWM in the OP of CM7
3) Do all Wipes then Flash CM7 0704
let boot fully
USE the Shutdown menu to get to orangeCWM
4) Do all Wipes then flash CM& 0713
let boot fully
USE the Shutdown menu to get to orangeCWM
5)Flash OMFGB
pull battery & 3 finger salute to redCWM
6) Do all Wipes then re-Flash CM7 0704
reboot and bingo you are at OMFGB
Click to expand...
Click to collapse
Trying this in about 15 minutes, will report asap...
Again, thanks for help...
Sent from my Transformer TF101 using XDA Premium App
when you say OP of CM7 thread, which one, there seem to be many CM7 threads... link please?
martyr2k6 said:
when you say OP of CM7 thread, which one, there seem to be many CM7 threads... link please?
Click to expand...
Click to collapse
also, lets assume I am completely as stock as possible... how should I get CWM on, and which version please link...
Also it miht be worth mentioning, though I think I already did... but when I go to activate my pjone, it says its successful, but then I go to make a call and it say that verizon annot authenticate my phone...
Here's a confusing screenshot...
Sent from my Transformer TF101 using XDA Premium App
Alright the issue is resolved, my main concern was whether or not I could use my phone for phone calls... after finally mustering up the guts to call Verizon, it turned out that the main problem in which I was experiencing was due to some form of typical midnight updates that big red does... apparently, my phone, missed some form of update that ended up de-authorizing my phone, but Verizon was able to help out, even at this late hour.
On the good note, everything went through just fine as far as flashing cm7... I just seem a bit conflicted with which rom is best. I guess its just a matter of personal preference, really. So far I prefer jt's rom just fine, but I might be switching back and forth between jt's and omfgb...
Thanks again for all the help folks, I appreciate it more than you could know.
Sent from my Transformer TF101 using XDA Premium App
xwhofarted said:
sounds like your modem may be messed up
this is what i would do:
1) Odin this it is an "Stock" ED01 DB/DO
http://www.multiupload.com/9JSTWA6Y6L
LET IT BOOT FULLY
2) flash the CWM in the OP of CM7
3) Do all Wipes then Flash CM7 0704
let boot fully
USE the Shutdown menu to get to orangeCWM
4) Do all Wipes then flash CM& 0713
let boot fully
USE the Shutdown menu to get to orangeCWM
5)Flash OMFGB
pull battery & 3 finger salute to redCWM
6) Do all Wipes then re-Flash CM7 0704
reboot and bingo you are at OMFGB
Click to expand...
Click to collapse
Not sure that I totally understand as to why I need to flash cm7 0713, then omfgb, then reflash cm7 0704... seems a bit redundant.
If you could clarify this for me and what improvement this offers, I would appreciate it.
Sent from my Transformer TF101 using XDA Premium App
Because omfgb apparently doesn't convert to mtd but cyan does, so you have to flash cm first
Sent from my SCH-I500 using XDA App
riceje7 said:
I believe the issue is you need to convert your system to mtd before flashing omfgb...some one correct me if I'm wrong though as I don't want to spread false info.
but Try installing jt's 0704 cm7 build following his instructions, then install his 0713 build (possible unnecessary step but it worked for me), then flash omfgb. You will most likely have to flash jt's fixed cwm to subsequently flash his cm7 as I had to since I was coming from a stock restore. And now I'm running a blazing fast omfgb...I was able to restore all my apps and data in half the time it took on com rom...good luck let me know how it goes
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
yup, that was your mistake. prior to flashing omfgb, you need to be on jt's cm7.
I'm too lazy to read all the posts but try flashing cm7 via cwm4. then, Odin back to stock using the right files and configurations. there's a sticky in the development section.
Hey guys. I've been an Android & XDA user for a while now, so this question shouldn't be about a nooby-sitiuation.
My friend bought an AT&T Samsung Galaxy SII (SGH-i777) this week. I've been trying to flash CM7 ever since. I got the rooting done, the properly recovery (with no signature / "abort" problems)
The rom seems to keep bricking the phone. Its simply unflashable. I seen tons of people on XDA who got it to work, with barely any serious problems. I troubleshooted the problem myself, and its simply just the CM7 roms. I would do a full wipe, and then install the rom like I would on my other Android phones, and the installation is successful. When it boots, it gets stuck on the Galaxy SII boot screen (not the splash/boot animation screen) and it would stay on it with a yellow warning triangle on the bottom.
I tried flashing other roms, like Cognition X2, and they worked. Its just CM7 on this phone... which is odd because CM7 is usually stable (nightlies aside.) Especially since the 7.1 stable version was recently released. Anyone can help me get the rom up and going? Would be highly appreciated.
did you try to wipe dalvick cashe as well when you wiped data?
I just flashed it tonight myself and all I did was reboot into CWM and did a Wipe data/factory reset and then Wipe cache partition. After doing that, I simply flashed the cm7 zip file that was loaded on my internal sd. Rebooted and no problems.
I didn't have ANH ISSUES installing it but I know I read that some.people bad to flash it twice initially. So flash it, then when it goes back to the recovery screen flash it a second time. I also remember users on the international SGS2 bad to do the same thing. Most have no issues but I think they found that it depends on what you used to root your phone (on the SGS2 internationals) and I THINK some had to do the same here. Try it and if it works just hit the thanks button.
Sent from My KickAss CM7 Galaxy S2
if you flash it and get stuck in a bootloop, just pull the battery, and 3-finger back into recovery to flash the rom again.
keep doing this until you get it up and running - took me a few times, including a couple of battery pulls.
How do you boot into recovery? I know On the SGH-i777 you have to hold the Vol down+back+power to get to the Download mode, but I tried everything to get to the recovery itself.
Boobie Watcher said:
did you try to wipe dalvick cashe as well when you wiped data?
Click to expand...
Click to collapse
Yes. I've flashed many roms before, this seems to be the only one I had ever seen a problem with.
mfpearson said:
if you flash it and get stuck in a bootloop, just pull the battery, and 3-finger back into recovery to flash the rom again.
keep doing this until you get it up and running - took me a few times, including a couple of battery pulls.
Click to expand...
Click to collapse
Word.
Edit: To boot into recovery vol up+vol down+power
Had the same problem. Read somewhere to install the ROM twice in a row in CWM without rebooting inbetween. Worked like a charm.
Thanks for the feedback guys. I'll try this in the morning once I get my hands on the phone again.
Saw this type of behaviour on occasion with cm7 on my aria. Sometimes caused by a bad download of the rom. Did you verify md5s ?
Sent from my SAMSUNG-SGH-I777 using Tapatalk
Don't forget to do a master data clear /reset before trying to boot the new CM7 rom for the first time - clear out the old stuff. Works perfectly here.
Sent from my SGH-I777 using xda premium
I'm having the same issue. I'm getting signature errors when trying to flashCM7.1 stable. I've downloaded it two times now with the same problem. My question is, I'm trying to flash from on the phone itself, storing the zip in the download dir on the phone as I don't have an sd card. Will this even work? I've tried looking around and all I can find is flashing from an sd card. I can get one, I just haven't yet.
squigge said:
I'm having the same issue. I'm getting signature errors when trying to flashCM7.1 stable. I've downloaded it two times now with the same problem. My question is, I'm trying to flash from on the phone itself, storing the zip in the download dir on the phone as I don't have an sd card. Will this even work? I've tried looking around and all I can find is flashing from an sd card. I can get one, I just haven't yet.
Click to expand...
Click to collapse
That's the way I did it. Put the update in the same folder on the internal SD card. I can't even access my external SD card from CWM.
Sent from my SGH-I777 using xda premium
Hmm, I'm not sure what I'm doing wrong then. I did a factory reset, and wiped the cache and get the same thing. I know it wiped because now I have nothing setup on the phone when I boot normally. Suggestions?
Quit downloading the CM7 builds for the International Galaxy S II. They will NOT work. That is why it fails. Look for the Galaxys2ATT build.
Sent from my SGH-I777 using xda premium
I got the build by going to the cm7 website, looking by device, finding the galaxy s 2 and grabbing the stable one. So perhaps that is the incorrect one and I'll look closer for one that has att in it, whenever the site isn't going up and down. They seem to be having issues today.
Make sure you're installing the version located in this thread...
http://forum.xda-developers.com/showthread.php?t=1297568
Specifically this link
Double flash made it work. Thanks guys. + thanks for telling me how to boot into recovery lol. Great rom.
Sorry for the newb issues, it was the wrong version. I got the att version from the thread previously mentioned and that worked perfectly. Thanks!