to properly break your esn for a optimus v for boost moble
follow directions found here
http://forum.xda-developers.com/showthread.php?t=991668
skip the prl part you dont care you wanna frag your phone to never work again to make phone calls
<i chose method 2 for getting SPC>
goto security tab
in a drop down menu obvious choice would be to choose LG method
choose read ESN change the esn and press write
this shoulD produce a message saying you suck this failed but you a hacker try the other methods
so try the other methods when you get to the EFS method this should say sucseed --you think yeah im awsome now go back to the lg method and choose read ESN and it should now read 000000
you have now successfully ruined your phone congrats
by the way you can have this esn i dont need it
Any tips and suggestion are welcome
this is a great tool alternative to the tut http://www.cdmatool.com/
register run app log in -it keeps a data base of phone types
i dont like the login part but it works
wethecom said:
to properly break your esn for a optimus v for boost moble
follow directions found here
http://forum.xda-developers.com/showthread.php?t=991668
skip the prl part you dont care you wanna frag your phone to never work again to make phone calls
<i chose method 2 for getting SPC>
goto security tab
in a drop down menu obvious choice would be to choose LG method
choose read ESN change the esn and press write
this shoulD produce a message saying you suck this failed but you a hacker try the other methods
so try the other methods when you get to the EFS method this should say sucseed --you think yeah im awsome now go back to the lg method and choose read ESN and it should now read 000000
you have now successfully ruined your phone congrats
by the way you can have this esn i dont need it
Any tips and suggestion are welcome
this is a great tool alternative to the tut http://www.cdmatool.com/
register run app log in -it keeps a data base of phone types
i dont like the login part but it works
Click to expand...
Click to collapse
IS there a way to recover from a bad esn???
i would say not by any means i have found but this probably works on other models but the optimus v it frags it -let me know if you do find a way
wethecom said:
i would say not by any means i have found but this probably works on other models but the optimus v it frags it -let me know if you do find a way
Click to expand...
Click to collapse
I just tried it with Optimus S and no success. I tried LG METHOD and it gave me the .... Fail cannot change esn error.
Now the esn on the phone shows zeros.
prominator said:
I just tried it with Optimus S and no success. I tried LG METHOD and it gave me the .... Fail cannot change esn error.
Now the esn on the phone shows zeros.
Click to expand...
Click to collapse
wow so i take it you didnt read the title or the message atleast now we know it dosnt work for the optimus s either thank you
omg i used dfs a cmda tool that requires a login and it fixed it
last time it didnt work but now it dose omg
edit-------------------
premature post sorry it can change to 000001 or 000002 or others thats all others fail
WS 3.7 will fix it, and I think 3.5, I've repaired quite a few!
i used a version of cmda workshop but it didnt allow the original to go back in-but it allowed other sen ranges -i will check my version and try again with a newer version if mine was old..if it is built into the software to block ranges i will definitly try to crack it so it will allow any ..but i sorta lost intrest because i solved my esn problem and can now register with google email now that it has a valid esn other than 00000000
You can fix your ESN using the NV items write feature.
NV items 0 and 5597 are both your ESN but written backwards in pairs.
NV items 1943 and 5598 are both your MEID but written backwards in pairs.
By backwards in pairs I mean if your real ESN is 12345678, then NV item 0 and 5597 is:
78 56 34 12
If your MEID is A10000009296F2, then NV item 1943 is:
F2 96 92 00 00 00 A1
Read NV items 0 to 5598 from your phone. The items listed above should all be 0's if you accidentally wiped them out. Fix the values in the way I described above so that they match up with your original ESN and MEID. Then write the entire NV file back to your phone. This should repair your ESN to its original value.
Related
i flashed my p4000 to the new rom, and my pst info cleared, which i have written down, but when i go to enter the new info in, it asks me for a unlock code...
in all the tuts i read it never told me how to check it or anything i dont know what the unlock code would be, i also bought it used, anyone know?
i cant use my phone until i fix this, and i really need my phone tonight.
Unlock code for the SIM or the phone? I presume theres nothing on your device till now, why not hard-reset or upgrade to another ROM?
Regards,
Carty..
htc p4000 have no sim cards.
im doing the ##778 to get into the PST menu, then when i try to edit it, to input my #, it asks me for an unlock code... :S
have you tried all 0s or 123456 or your phone number?
yes i tried a couple.
000000
123456
654321
i havnt changed the code...anyone know how to change it through an app or the default code?
arg!
i need my phone tonight.
Berserk87 said:
yes i tried a couple.
000000
123456
654321
i havnt changed the code...anyone know how to change it through an app or the default code?
arg!
i need my phone tonight.
Click to expand...
Click to collapse
If it's anything like sprint, then a simple call to your carrier should remedy the problem. with sprint it's called an "MSL" and they give it to you when programming your phone. So if you call and tell them that you need to 'reprogram' your phone, they should walk you through the steps along with giving you the code.
if i reflash it with the nueROM v2 build 5022, its a sprint rom...so that would mean i could use the 000000 as the unlock code?
also, after flashing to the new roms, my phone continually reset...would go on for a minute then reset... thats why i went back to my default rom, but now its asking for an unlock code >.>
Unzip this to your phone. Take your battery off and write down your Hex ESN. Run GetSPC.exe. Type your Hex ESN in the first box. The second box will be your unlock code.
*edit - removed file, missing keygen and someone linked to it on the next page.
k ill try that out, thank you.
any reason why my phone would be constantly reseting after installing the new roms?
k.
my EST is
but when i type that in, its saying "could not link to dll"
?
If I were you I would edit that post and remove that ESN # ASAP, people can use that to steal your service.
jjlwork said:
If I were you I would edit that post and remove that ESN # ASAP, people can use that to steal your service.
Click to expand...
Click to collapse
****, i was worried something like that could happen.
it should be the hex of that number though right?
do i include the first 3 letters?
k i converter the esn to hex and its still not working >.>
Berserk87 said:
k i converter the esn to hex and its still not working >.>
Click to expand...
Click to collapse
you might try the program found here:
http://forum.xda-developers.com/showthread.php?p=1541466 (it's the program called GetSPC)
i tried it on my phone and it provided an MSL number. hafta admit, tho - the MSL it gave me didn't work (and it differs from the MSL i have written down for my phone).
i might also suggest that you SEARCH...it's what I did to find the above. you might also try calling your carrier and ask them what the unlock code is.
OH -- use a HEX version of the ESN, and use ALL CAPS for any letters in the HEX version. It still may provide you with an invalid MSL...but worth a shot.
Make sure you are using the correct number for ESN, just converting the number from the back of your phone to hex will not work. Click program settings and device information on the bottom it will say ESN followed by a 8 digit hex number..that is the hex esn, you then put that in GetSPC and it will give you your 6 digit master unlock code. Dial ##6digitcodeSEND and it will open up to a place with 2 settings that can be changed, enter your 10 digit phone number for these two settings.
If you still can't get it, call Telus & tell them you can't make any calls, they will walk you thru the reprogramming process.
jjlwork said:
Make sure you are using the correct number for ESN, just converting the number from the back of your phone to hex will not work. Click program settings and device information on the bottom it will say ESN followed by a 8 digit hex number..that is the hex esn, you then put that in GetSPC and it will give you your 6 digit master unlock code. Dial ##6digitcodeSEND and it will open up to a place with 2 settings that can be changed, enter your 10 digit phone number for these two settings.
If you still can't get it, call Telus & tell them you can't make any calls, they will walk you thru the reprogramming process.
Click to expand...
Click to collapse
ahhhh
thats what i was doing :loollll
k, i entered my hex number and its still saying "cant link to dll"
i got like 15 minutes to figure this out :O
k the "phonetools" the other guy linked too was missing files, so it wouldnt work either way, lets try the real one >.>
WORKED, AWESOME.
now to test it out
Berserk87 said:
k the "phonetools" the other guy linked too was missing files, so it wouldnt work either way, lets try the real one >.>
Click to expand...
Click to collapse
Don't know why it didn't work, it's the exact same program. The only thing I took out was the PPC 2003 version so you wouldn't run that by mistake.
*edit - just downloaded it & it's missing the keygen. I don't know how that happened, sorry. I would've just linked to the original but I couldn't remember where I'd gotten it initially.
Hello all,
Last night, I tried updating my Rom on a sprint mogul to the recent dcd 2.2.6 and 3.27 radio.
I followed the steps of taking down the information, finding my unlock code, unlocking, and updating both roms.
It went with no problems. However my MSID was reset so i had to enter my unlock code that i got from get spc. before i reflashed my device, i checked to see if the code worked by trying to enter and edit epst.
But in windows 6.1 the unlock code didnt work, my msid and mdn were set to all 0.
I called sprint they gave me the same unlock code that didnt work.
So i tried reflashing back to the original sprint official release, that didnt work, i was getting an error 328 from the ruu.
I tried reflashing again dcd 2.2.6 rom, that worked but the radio wouldnt flash due to the same invalid command error 328 from the ruu.
So for a while i was stuck on the htc splash screen with a no radio display. I found a thread with a solution to the same problem. I flashed the leaked sprint rom 3.16, that worked and i was able to get up and running.
However in epst mode my hex and dec esn are all zeros. my original unlock code doesnt work, (the one from sprint), but when i enter in all 0 in getspc it generates the proper unlock code,
but i still can not connect to the sprint network even tho i am able to set my msid and msn to the correct values, my esn is still wrong (displays all zeros)
Can any please tell me if i can fix this, I was on the phone with sprint for 2 hrs with no avail. I need to set my esn on the phone to match my esn in hardware
Thank you,
Kevin
Okay, if I read your post right you do have your MSL number (unlock code) right? If you do, go to your keypad on the phone and dial ##3282# (##DATA#). It should ask you if you want to view or edit. Choose edit and type in your MSL number. On the main screen there should be an option on the left softkey that says "View Info". Choose that and then select "Advanced". At the top I believe you can edit your ESN number.
Hope that helps.
krazieintentz said:
Hello all,
Last night, I tried updating my Rom on a sprint mogul to the recent dcd 2.2.6 and 3.27 radio.
I followed the steps of taking down the information, finding my unlock code, unlocking, and updating both roms.
It went with no problems. However my MSID was reset so i had to enter my unlock code that i got from get spc. before i reflashed my device, i checked to see if the code worked by trying to enter and edit epst.
But in windows 6.1 the unlock code didnt work, my msid and mdn were set to all 0.
I called sprint they gave me the same unlock code that didnt work.
So i tried reflashing back to the original sprint official release, that didnt work, i was getting an error 328 from the ruu.
I tried reflashing again dcd 2.2.6 rom, that worked but the radio wouldnt flash due to the same invalid command error 328 from the ruu.
So for a while i was stuck on the htc splash screen with a no radio display. I found a thread with a solution to the same problem. I flashed the leaked sprint rom 3.16, that worked and i was able to get up and running.
However in epst mode my hex and dec esn are all zeros. my original unlock code doesnt work, (the one from sprint), but when i enter in all 0 in getspc it generates the proper unlock code,
but i still can not connect to the sprint network even tho i am able to set my msid and msn to the correct values, my esn is still wrong (displays all zeros)
Can any please tell me if i can fix this, I was on the phone with sprint for 2 hrs with no avail. I need to set my esn on the phone to match my esn in hardware
Thank you,
Kevin
Click to expand...
Click to collapse
thank you for your reply.
I do have my unlock code. the ##data# shows the esn in advanced settings, but the box is greyed out and will not allow me to edit it.
It still shows 00000000.
Thank you, any other ideas, maybe a registy edit?
It sounds like something happened during the flash process. I talked to a PCS rep and they said you would have to bring it in and get it swapped. I can't think on any other way to get that info updated. Sorry.
no there is another way, you can sniff for the spc, the original thread about getspc had directions @ ppcgeeks
dalvarez7 said:
Okay, if I read your post right you do have your MSL number (unlock code) right? If you do, go to your keypad on the phone and dial ##3282# (##DATA#). It should ask you if you want to view or edit. Choose edit and type in your MSL number. On the main screen there should be an option on the left softkey that says "View Info". Choose that and then select "Advanced". At the top I believe you can edit your ESN number.
Hope that helps.
Click to expand...
Click to collapse
You need ths link
http://forum.ppcgeeks.com/showthread.php?t=17495&highlight=getspc
I went to a sprint tech and they said they i had to replace the phone, and they would order me a new one. but right now i have to wait the warehouse doesnt have any instock.
there is another way however, if it was erased by software, it can be changed by software.
I did not find anything relevant on the link above, i will keep looking through it. If someone could point me in a closer direction.
I do have my unlock code, currently all zeros, so im not looking to get my MSL number, im looking to change my ESN back to what it was, somehow it was set to all 0's during the rom update process.
Thank you,
Kevin
Perhaps you should change the thread title to something more specific to separate yourself from the masses who can't boot because they didn't upgrade their radio.
Perhaps try an RTN reset? This is a hard reset that erases provisioning data. I don't know if it can restore an ESN, but worth a try.
Go to dialer
##786# (##RTN#)
Menu->reset
krazieintentz said:
Hello all,
I followed the steps of taking down the information, finding my unlock code, unlocking, and updating both roms.
Click to expand...
Click to collapse
Is it just me or does something seem wrong with this quote. Read the instructions here: http://forum.ppcgeeks.com/showthread.php?t=17667
The phone needs to have the unlocker program run to install a custom rom. The code from GetSPC allows you to edit the settings not unlock your phone.
hohnan said:
Is it just me or does something seem wrong with this quote. Read the instructions here: http://forum.ppcgeeks.com/showthread.php?t=17667
The phone needs to have the unlocker program run to install a custom rom. The code from GetSPC allows you to edit the settings not unlock your phone.
Click to expand...
Click to collapse
Look i dont need any smart comments.
Well actually for your information, the MSL code is used to unlock your phone. the unlocker program is used to unlock your bootloader to accept a custom rom.
MSL - master subsidy lock, this locks network settings so that a user can not change them, the code given by getspc is stored in nV ram on the phone and is used to gain access to these files, thus "unlocking" the phone. unlocking the bootloader is another story...
anywho, i was able to get my phone working, i reprogrammed my esn, reprogrammed my MSL from all zeros to the proper value, and now my phone is back on the sprint network.
if you guys are interested i will write a tutorial on how i did this, just to respond to the other post, a hard reset does not restore esn data.
Good for you! I'm glad you figured it out. I would be interested on how you got it working again.
krazieintentz said:
Look i dont need any smart comments.
Well actually for your information, the MSL code is used to unlock your phone. the unlocker program is used to unlock your bootloader to accept a custom rom.
MSL - master subsidy lock, this locks network settings so that a user can not change them, the code given by getspc is stored in nV ram on the phone and is used to gain access to these files, thus "unlocking" the phone. unlocking the bootloader is another story...
anywho, i was able to get my phone working, i reprogrammed my esn, reprogrammed my MSL from all zeros to the proper value, and now my phone is back on the sprint network.
if you guys are interested i will write a tutorial on how i did this, just to respond to the other post, a hard reset does not restore esn data.
Click to expand...
Click to collapse
I also would be interested
dalvarez7 said:
Good for you! I'm glad you figured it out. I would be interested on how you got it working again.
Click to expand...
Click to collapse
This would be a handy bit of knowledge as they go thru great lengths to keep it from being done. Ususally the filesystem for that section of the phone is locked and protected, requiring the QXDM (Qualcomm Extensible Diagnostic Monitor) software to get in. I have an older version that I used to use to play with older phones and it worked great, but a newer one would be needed for these phones. Old style glitch corruption will mess up any filesystem and even mess up protected areas, which is likely what happened to yours. I would love to know how you did it without QXDM ;-)Thanks.
krazieintentz said:
Look i dont need any smart comments.
Well actually for your information, the MSL code is used to unlock your phone. the unlocker program is used to unlock your bootloader to accept a custom rom.
MSL - master subsidy lock, this locks network settings so that a user can not change them, the code given by getspc is stored in nV ram on the phone and is used to gain access to these files, thus "unlocking" the phone. unlocking the bootloader is another story...
anywho.........
Click to expand...
Click to collapse
Wow. A pretty harsh response to someone who was trying to help out.
A tutorial will be nice. if you have the time!
krazieintentz said:
Look i dont need any smart comments.
Well actually for your information, the MSL code is used to unlock your phone. the unlocker program is used to unlock your bootloader to accept a custom rom.
MSL - master subsidy lock, this locks network settings so that a user can not change them, the code given by getspc is stored in nV ram on the phone and is used to gain access to these files, thus "unlocking" the phone. unlocking the bootloader is another story...
anywho, i was able to get my phone working, i reprogrammed my esn, reprogrammed my MSL from all zeros to the proper value, and now my phone is back on the sprint network.
if you guys are interested i will write a tutorial on how i did this, just to respond to the other post, a hard reset does not restore esn data.
Click to expand...
Click to collapse
Krazeintentz,
I would be very interested in your final fix for this problem. The exact same thing happened to me a while back and my only way out at the time was a replacement titan under warranty from vzw.
If we had your steps to recovery then we would be a lot closer to having a disaster recovery wiki.
As another poster said, yours was a real rom flashing problem as opposed to the numerous "brick" cases that we see everyday from just half done flashes. So it makes it all the more relevant that we have a wiki for this problem.
Regards
Since he has not said, heres a theory
The filesystem is protected from editing in the address range where the ESN resides. The QXDM software shows the actual file structure of the chipsets flash and the files have actual attributes and the ESN file is read only, so the EPST is not supposed to be able to edit the ESN (as this would be cloneing a phone and not legal). If you follow the steps in a flash memory update, you would see that the contents of these protected files are read, saved, and then the flash is totally erased, then written with the new revision, and finally the protected storage is written and the attribute is set to read only. The QXDM is required to manually unlock these attributes, but there is a key that allows the flash utility to erase the stuff. if the flash was interrupted either by hardware or software error at the point after the erase and writeback but before the write of protected file area, the ESN would be blank and also the EPST in the phone would be able to edit it in edit mode because the attribute is the very last thing written. I bet thats how he fixed it and now has a cloneable phone too and can change his ESN any time he wants, at least until he flashes the radio again which will fix the glitch by process. Thats probably what he did.
Hey guys Im a noob and im having a bit of problems
Im stuck in the bootloader screen
TITA100 MFG
SPL-2.40 Olipro
CPLD-9
My comp has windows vista premium so instead of activesync i have windows device center 6.1 I have unclicked allow USB connections
but i think my comp doesnt recognize that they the phone is connected at all although i do here the sound that lets me know that a usb device is connected
exitbl.exe doesn't work keeps telling me
cannot open USB port
Please make sure that USB connection in Activesync is disabled
Also make sure that your USB cable is properly connected
if it helps im on a bell phone
I upgraded my new 6800 yesterday using the directions Here.
I upgraded to Olipro 2.40, CDMA Radio 3.42.02 , and DCD Titans 3.20 ROM. The upgrade went smooth enough. I was unable to use my 1GB microSD card but I was able to use USB. When I was finished I installed the verizon carrier cab. I called *228 to program my phone. Programming failed and it failed because my ESN was now set to all zeros. I attempted to reset the ESN using CDMA workshop and the instructions in the troubleshooting section of the wiki. It failed and now CDMA workshop is unable to access my ESN at all. See my previous post. When CDMA workshop reads from the phone it pulls all the info except for the ESN and the Number fields . It says ':: Failed ::" in the phone information box on the left for both of those fields. It also gives me an error "Cant read EFS" when I try to pull up the phones setting using ESF. It is like some portions of the phone are now locked (or deleted).
I decided to try to flash back to the original stock ROM and I am unable to do so. I am unable to reflash my bootloader, the radio, or the DCD ROM. I cant do it using the microSD and when I try doing it via USB I get an Error 328, Invalid Command. My phone boots fine but I cant change any of the ROMS. I can also see all my phones programming settings using ##3424, using CDMA workshop, and QPST) but I am unable to change any of them. It is like my phone is partially locked.
My current bootloader says
TITA100 MFG
SPL-2.40.Olipro
CPLD-9
and during startup it says:
M 09
B03
P DCAAXAM-4350H
R 3.42.30
D 3.20
Since I cant access the ESN to change it, my phone is not usable. Can anyone help me reset my esn to the correct value? Any suggestions on what to try myself or do I need to send it to someone with the correct tools? or is my phone beyond repair? If you need additional information, I can provide that as well. Thanks.
I'm looking into it for you. Give me a little.
gc14 said:
I'm looking into it for you. Give me a little.
Click to expand...
Click to collapse
Thank you very much for any assistance you can give me.
Have you tried ##778 enter 000000 for the unlock code. Use edit. Just a thought, we may be talking about 2 different things.
Ga. Medic said:
Have you tried ##778 enter 000000 for the unlock code. Use edit. Just a thought, we may be talking about 2 different things.
Click to expand...
Click to collapse
I did try that but when I had EPST in edit mode, I could only change a few of the values and the ESN was not one of them.
I was able to fix my phone. I tried to re-flash my phone again back to stock but this time I tried it using my laptop. I still could not get the microSD method to work but USB did work this time. When I was finished, my esn was reset again to all zeros (previously it had been a mix of my real esn and zeros like 35782000). I ran CDMA workshop again and this time the change from all zeros to the correct ESN was successful. My phone also activated successfully using *228.
I flashed my evo 3d to pageplus, and I have working 3g. But whenever I try to make a phone I get a error. Welcome to Verizon Wireless, there was an error in processing you call..." Any thoughts on how to fix this one?
Thank you
alexchase678 said:
I flashed my evo 3d to pageplus, and I have working 3g. But whenever I try to make a phone I get a error. Welcome to Verizon Wireless, there was an error in processing you call..." Any thoughts on how to fix this one?
Thank you
Click to expand...
Click to collapse
Same **** happens to mine. idk how to fix it
pimix2009 said:
Same **** happens to mine. idk how to fix it
Click to expand...
Click to collapse
I have tried different radios, prls. Lost count of how many times I have reconfigured the device. Not sure what else to try.
alexchase678 said:
I have tried different radios, prls. Lost count of how many times I have reconfigured the device. Not sure what else to try.
Click to expand...
Click to collapse
I tried diff prl ,Rom and even diff phones
pimix2009 said:
I tried diff prl ,Rom and even diff phones
Click to expand...
Click to collapse
So I got a samsung fascinate and I had the same problem, but I think I found the fix! From your donor get the akeys under cave. Sound be a group of three numbers (AKEY, SSD_A, SSD_B).
alexchase678 said:
So I got a samsung fascinate and I had the same problem, but I think I found the fix! From your donor get the akeys under cave. Sound be a group of three numbers (AKEY, SSD_A, SSD_B).
Click to expand...
Click to collapse
I used DFS for this so I didnt get anything when I tried to read that area from my donor. I got a "Bad PARAM " message
pimix2009 said:
I used DFS for this so I didnt get anything when I tried to read that area from my donor. I got a "Bad PARAM " message
Click to expand...
Click to collapse
What kind of phone is the donor?
In DFS can you read nvitems 25 (Authentication Key), 26 (Authentication Key Checksum), 27 (SSD A), 29 (SSD B)?
alexchase678 said:
In DFS can you read nvitems 25 (Authentication Key), 26 (Authentication Key Checksum), 27 (SSD A), 29 (SSD B)?
Click to expand...
Click to collapse
Lg Dare (LG VX9700) is my donor
pimix2009 said:
Lg Dare (LG VX9700) is my donor
Click to expand...
Click to collapse
I used a lg ally (vs740).
Have you tried opening the phone with LGNPST first?
Here the what I had to do:
1.) Install LGNPST http://forum.xda-developers.com/showthread.php?t=1684394
2.) Register the dll for the phone; this one should work for your phone http://www.mediafire.com/?0n21s6xnx5dvxa9. You should be able to right and select register dll, if not found this guide http://androidforums.com/ally-all-things-root/263674-guide-lgnpst-alternate-v6-restore-method-updated-5-24-11-a.html
3.) Now in LGNPST the phone shouldn't say UNKNOWN if it does there is something wrong with DLL or it isn't registered correctly (Check under File -> Select DLL).
4.) Click phone setting and in the new window click Read. After the read is done the phone shouldn't have service anymore. Close LGNPST.
5.) Then try reading the AKEY settings in DFS. For whatever reason I still couldn't see them in LGNPST but it unlocked the phone and I could see them in DFS and CDMAWS.
alexchase678 said:
I used a lg ally (vs740).
Have you tried opening the phone with LGNPST first?
Here the what I had to do:
1.) Install LGNPST http://forum.xda-developers.com/showthread.php?t=1684394
2.) Register the dll for the phone; this one should work for your phone http://www.mediafire.com/?0n21s6xnx5dvxa9. You should be able to right and select register dll, if not found this guide http://androidforums.com/ally-all-things-root/263674-guide-lgnpst-alternate-v6-restore-method-updated-5-24-11-a.html
3.) Now in LGNPST the phone shouldn't say UNKNOWN if it does there is something wrong with DLL or it isn't registered correctly (Check under File -> Select DLL).
4.) Click phone setting and in the new window click Read. After the read is done the phone shouldn't have service anymore. Close LGNPST.
5.) Then try reading the AKEY settings in DFS. For whatever reason I still couldn't see them in LGNPST but it unlocked the phone and I could see them in DFS and CDMAWS.
Click to expand...
Click to collapse
I had Lg Ally around somewhere and just decided to switch to that and found the DLL file on google. Opened LGNPST, Read then close then DFS....worked like a charm. Thank You So Much
pimix2009 said:
I had Lg Ally around somewhere and just decided to switch to that and found the DLL file on google. Opened LGNPST, Read then close then DFS....worked like a charm. Thank You So Much
Click to expand...
Click to collapse
Good deal, glad it worked out for you!
alexchase678 said:
Good deal, glad it worked out for you!
Click to expand...
Click to collapse
did u get your data to work ? this whole time Ive been on wifi and didnt bother testing my data but the psw copied from the donor is not even 32char long on HEX so I tried to read nv 466 and 1192 but they both have numbers with lot more characters when I open them with my hex editor
pimix2009 said:
did u get your data to work ? this whole time Ive been on wifi and didnt bother testing my data but the psw copied from the donor is not even 32char long on HEX so I tried to read nv 466 and 1192 but they both have numbers with lot more characters when I open them with my hex editor
Click to expand...
Click to collapse
Attached a couple of screen shots of my DFS setup. For nvitem 466 part 1 and part 2; you should see 00 10 after the 10 count 16 sets of digits and that should be part one. The second part starts after the 10 and count 16 sets again, don't include the 10 in the passwords. Write everything in HEX, on my wife's phone I noticed DFS wrote the nvitems in strings gave me errors. You could also try using the NV write in DFS.
Open QPST and Start -> EFS Explorer. Copy 10.key from DMU folder from donor phone and place on target phone in the same folder; create the DMU folder if needed.
If you still have problems in DFS under Mobile IP change DS QcMIP to Simple IP.
Good afternoon XDA, today while trying to flash a buddies phone to US Cellular or rather swapping esn and meid (I know, legal grey area) I lost the esn on the phone and now it is all zeros. I was using CDMA Workshop when it happened. Now I'm just trying to get the esn back to original but I cannot find a way to get it to change. I've tried DFS, CDMA Workshop and QPST but nothing will change it. Actually I can't get QPST to recognize the diag port. Any help would be appreciated. Is there a backup of the EFS like on some other phones that I could restore? Feel free to PM me. Thank You.
Just to add some details. Everything on the phone still works so I do not believe it is a corrupt efs just somehow cdma workshop got something wrong. I wonder if I should have rooted the phone before trying, I do remember seeing a message in DFS saying something like NV item not written, read only.
fyca said:
Just to add some details. Everything on the phone still works so I do not believe it is a corrupt efs just somehow cdma workshop got something wrong. I wonder if I should have rooted the phone before trying, I do remember seeing a message in DFS saying something like NV item not written, read only.
Click to expand...
Click to collapse
Flash the phone with LGUP and it should be back to normal.