Hello, I started a question in another thread regarding getting OTA updates for the Bell Atrix while on the Rogers network and didn't want to derail it too much.
I was just wondering what the best way to do it would be.
Is it possible to use a friends sim card and change the APN back to bell's and install the OTA that way then revert it back to Rogers?
Can I install the OTA by just removing the sim card and using the phone via WiFi?
Or do I have to manually install?
Basically, I just want to know if I can still recieve OTA updates on the Rogers network without having to ROOT my phone?
Danke!
if it goes similar to the AT&T updates, you won't have to do a thing, OTA updates will still come to you.
the alternative would be to wait until it gets posted and then download and install it using either the guide from motorola or the dev forum.
Either way it shouldn't be a difficult thing. The hard part will be waiting for bell to release said OTA.
Ah, I see. That's very reassuring, thank you.
It seems you went with the Telestra route on your phone. Do you mind at all that you won't be able to go back to the Bell SBF if anything goes wrong or if you need to go back for some reason?
Not at all. mainly because I was patient with waiting for multiple people to try it out before hand and I would assume at some point this year a bell update will be released at which point I will have a restore point. for me the HSUPA update and skype functionality made the upgrade worth it.
Some point this year is going to be a long wait time... I wish we had this phone launched with atleast GingerBread if nothing else...
I have patience but I just can't seem to be able to wait as more I read, more I am pissed off about the fact that Motorola is not flexible, has boot loader locked, newest phone hardware is launched with old android version with multiple problems such as VOIP voice issue, HSPA capped, etc...
Man, I don't just understand why after these many years of struggle when Motorola is finally getting back in the game, they are committing such mistakes?
Oh well... lets hope this frustration will be over soon...
y2whisper said:
Not at all. mainly because I was patient with waiting for multiple people to try it out before hand and I would assume at some point this year a bell update will be released at which point I will have a restore point. for me the HSUPA update and skype functionality made the upgrade worth it.
Click to expand...
Click to collapse
Ah, I think I might end up going that route as well in the future. I think leaving my device in the hands of the developers here at XDA is not a bad option at all. If I want to play it extra safe though, I saw that there's the gingerbread theme that got ported from gingerblur in the theme section. (And for now, I don't necessarily mind not having the extra additions that Gingerblur offers) If I want something like that, do I need to flash my SBF past the point of no return? Or is rooting on the bell SBF enough to allow me to get CWM and not have to make any changes to my Bell SBF?
aimer said:
Ah, I think I might end up going that route as well in the future. I think leaving my device in the hands of the developers here at XDA is not a bad option at all. If I want to play it extra safe though, I saw that there's the gingerbread theme that got ported from gingerblur in the theme section. (And for now, I don't necessarily mind not having the extra additions that Gingerblur offers) If I want something like that, do I need to flash my SBF past the point of no return? Or is rooting on the bell SBF enough to allow me to get CWM and not have to make any changes to my Bell SBF?
Click to expand...
Click to collapse
you can install the themes on the bell FW, but you have to root and deodex. There are scripts to install, but CWM is much easier.
Hi All,
My wife is finally fed up being stuck on 2.1 and is looking for me to update her phone. I'm pretty familiar with the process on my phone (Droid X), but I know absolutely nothing about rooting and installing ROMs on this phone.
The instructions thread sticky'd here looks pretty self explanatory, but I imagine I might have some questions during it... but there is nothing I can do about that just yet.
A couple of questions.
1) Is there anything I should know that's not in that thread. A link to ODIN would be pretty nice since I have no clue what that is (guessing it's something like RDSLite).
2) What's the current favorite GB ROM? I'm thinking about putting her on something TW based, simply because of the amount of changes that could make it a harder transition for her. I figure I can pop Launcher Pro on and let her use the TW Dialer and other menus she's used to.
3) I know I'm going to sound crazy for contradicting myself above, but what's not working in CM7? I haven't put my X on CM7 because there are some things not working entirely, but I'd consider it depending on what's missing.
4) Since the X's bootloader is still locked, I have no experience flashing radios and kernels. I'm assuming these should be outlined pretty closely in whatever ROM I choose to install.
Any other general advice would be appreciated, I'd like to get this done either tonight or tomorrow.
Kind of on a random note, I thought she was supposed to be on at least 2.2 stock. She's still on 2.1 for some reason, and I could swear I read about a 2.2 update a while ago, which gave me a bit of a surprise when I read 2.1-update1 in the Firmware version.
Thanks for your help!
Read this link... It has everything you need to get started
http://forum.xda-developers.com/showthread.php?t=1238070
If you went to settings/about phone/updates? There will be an option to check for system updates. It's been a while since I've looked at that setup, but it's in that general area. I would definitely recommend Vanilla GB for your wife if you're looking for simple but intense performance. I switch between all the MTD GB roms, I love all of em.
Sent telepathically.
Thanks guys.
She's looking for stability more than anything, but I want her to be familiar and not lost.
If she decides she wants TW later, can it be put on later or is it completely ripped? I just don't want to need to flash this multiple times.
I'm leaning towards PowerWash GB now; can't tell if GB is still in dev. Thinking maybe I should just use one of the Froyo ones.
Thoughts?
Check out the "stickies" section in development. There are multiple official restore packages in case you mess up. Look in the "Going from Vanilla GB/etc etc to any other ROM" thread. You can move mountains with that one.
Sent telepathically.
EtherBoo said:
Thanks guys.
She's looking for stability more than anything, but I want her to be familiar and not lost.
If she decides she wants TW later, can it be put on later or is it completely ripped? I just don't want to need to flash this multiple times.
I'm leaning towards PowerWash GB now; can't tell if GB is still in dev. Thinking maybe I should just use one of the Froyo ones.
Thoughts?
Click to expand...
Click to collapse
Until powerwashed gingerbread gets a kernal, the pw 1.2 ed05 is faster since it has the otb-fusion 1.6 kernal. Also if your phone can handle the undervolt, the 0808 pbj kernal works nice to. Again everything you need is in the link I posted. Even includes a going back to stock tutorial, with vzw official 2.2.2 ed05 package from pentafive.
Just got it working on CM7. Woooo.
I had her playing with Vanilla and she seems to not like it.
I tried to get her onto PowerWash and it was not very happy. Odin kept crapping out.
Any suggestions as to how I could get a TW ROM on via CWM? Most of them seem to require Odin, and I don't see too many tutorials around (unless I'm missing something). I'd rather make her use vanilla than put her back on Froyo though...
Leaked OTA update from QA servers, found via project Cheesecake (YUMMM!) -- Thanks to ztotherad for the heads up that he may have found something, that's what started our chase!
Bootloader still locked. Battery bug still exists. If after flashing, it asks you to proceed to another (smaller) update (it shouldn't), don't do it. Consider yourself warned.
Flash over stock 2.3.4. Won't work with custom roms! Do not try!
Nothing really dramatic has changed, really, I'm just posting this for devs and whatnot to get their roms updated and such, but everyone else is welcome to install.
After install, you will need to root with zergRush. Now, I'm not sure if you can flash this in ClockworkMod Recovery, I haven't tried. Your best bet would be to throw this on the sd card, rename it UPDATE.zip and then boot into stock recovery and flash.
Changelog (not my change log)
Code:
1.3.412:
Based on 2.3.5 framework
Lockscreen dramatically optimized
Couple kernel changes (no idea what)
System is overall SLIGHTLY snappier compared to 2.3.4
MD5: 1632F1C83DF81F95BD42699CF80BBDB6
Download Here
--Miss the pulldown toggles? Mastafunk was very generous to post flashable pulldown toggle mods for 2.3.5. CLICK HERE.
Join us in the Droid X2 IRC channel! http://webchat.freenode.net/
Channel is #dx2
Thanks man!
Sent from my DROID X2 using XDA App
Awesome. THX!
Sweet!
Sent from my DROID X2 using XDA App
Still no battery fix.... grrrreeeeat
I wonder if upgrading the kernel will mess things up with existing ROMs.
Will avoid for now until we know exactly what this does.
You posted to a different rooting tool. Does this mean Pete's Motorola Rooting Tools won't work? Sounds like what they did was cover up that exploit then and that's probably what this update is.
I've got to on the "SLIGHTLY" snappier quip in the change log. I'll stay on 2.3.4 with the Liberty ROM.
But thanks for the heads up!
Thanks for the heads up regarding this 2.3.5. I will pass on this for now too since my phone is working well with the Liberty ROM and I see no real reason to go to 2.3.5 if the battery bug is still there.
Maybe if that updated the camera app to the same one that the bionic uses or did some super speed tweaks, but i don't see that as being the case.
I will download it to keep at the ready, just in case.
With a leak ota for 2.3.5 its getting more and more likely that this phone will get ics. The razr which runs 2.3.5 will be getting it so some hope is there. Im hoping that the music issue is cured with this although I doubt it. It just seems to be a bug that will plague the x2 until its dead.
Thanks will be putting this on my phone.
Sent from my DROID X2 using XDA App
0vermind said:
Leaked OTA update from QA servers, found from project Cheesecake (YUMMM!)
Bootloader still locked. Battery bug still exists. If after flashing, it asks you to proceed to another (smaller) update (it shouldn't), don't do it. Consider yourself warned.=QUOTE]
What makes you think the smaller ud is suspect?
Click to expand...
Click to collapse
skwoodwiva said:
0vermind said:
Leaked OTA update from QA servers, found from project Cheesecake (YUMMM!)
Bootloader still locked. Battery bug still exists. If after flashing, it asks you to proceed to another (smaller) update (it shouldn't), don't do it. Consider yourself warned.=QUOTE]
What makes you think the smaller ud is suspect?
Click to expand...
Click to collapse
I think in IRC he mentioned it makes u go.to a lower build number and it ads a couple bloatware apps. So its kinda pointless I guess
Click to expand...
Click to collapse
Just flashed the update via stock recovery, everything seems normal
ashclepdia said:
I think in IRC he mentioned it makes u go.to a lower build number and it ads a couple bloatware apps. So its kinda pointless I guess
Click to expand...
Click to collapse
Yeah, it's a reverse package, that takes you from 1.3.412 to 1.3.409 and adds a couple bloatware apps and binary files.. worthless. One of the added apps is only for moto engineers, so you can't even use it (Bug2Go).
lmao.. seems everytime I go to release an update, we get one of these
Pfilly said:
I wonder if upgrading the kernel will mess things up with existing ROMs.
Click to expand...
Click to collapse
It shouldn't. This is only a very minor update from what we see and the kernel version barely budged.
Thanks for this, but i usually don't update to Android unless a number of ROMs are building off of it so I know it's okay.
A quick question, does this battery bug (I'm assuming the jumping after restarting is the bug) exist on a stock unrooted phone as well? I cannot tell because there's no percentage, but does the reboot/battery jump happen on stock as well on the X2?
Meticode said:
Thanks for this, but i usually don't update to Android unless a number of ROMs are building off of it so I know it's okay.
A quick question, does this battery bug (I'm assuming the jumping after restarting is the bug) exist on a stock unrooted phone as well? I cannot tell because there's no percentage, but does the reboot/battery jump happen on stock as well on the X2?
Click to expand...
Click to collapse
I think it's across the board. Even my buddies ATRIX does it on 2.3.4 stock. He can be in the red and reboot and it will be 50% again.
Sent from my DROID X2 using XDA App
Meticode said:
Thanks for this, but i usually don't update to Android unless a number of ROMs are building off of it so I know it's okay.
A quick question, does this battery bug (I'm assuming the jumping after restarting is the bug) exist on a stock unrooted phone as well? I cannot tell because there's no percentage, but does the reboot/battery jump happen on stock as well on the X2?
Click to expand...
Click to collapse
Yes....its not exclusive to rooted...
Its 2.3.4 bug
Feels allot faster then 2.3.4 .. Flashed in system recovery, acted strange @ end just faded to black when it was done. Waited a bit and pulled battery, Came back up fine.
mastafunk said:
Feels allot faster then 2.3.4 .. Flashed in system recovery, acted strange @ end just faded to black when it was done. Waited a bit and pulled battery, Came back up fine.
Click to expand...
Click to collapse
Hmmm... I'm getting curious.
Sent from Droid X2 running Liberty3
So hey all, I am new here so bear with me. I have been on Android for about a year and am finally ready to root and run a rom. Started out with a Samsung Fascinate which got traded for a Droid X and that got replaced with a Droid X2. Having some small issues with the DX2, and since I need to factory reset I figured I would go ahead and try to root and run a rom...
So my question is being a complete noob would I be better with CM7 or Miui. Originally on the DX I looked into Miui and really liked how it looked and really wanted it and did a lot of research on it, but before I could try it I had to send back my DX and they replaced it with a brand new DX2 in the box. Then looking into it I noticed that Miui was not available for the DX2, so I just gave up and stayed put.
Recently reading thru the forums I see Miui is available now for the DX2, but I also was looking into CM7 which also looks really nice. I was wondering would either of them be easier for a noob? (i.e. install and post install customization) I have read up on both not having functional FM radio and HDMI, which are not big deals because I rarely use either... but are there any other big problems with either of these roms that would make a noobie like myself steer clear from them and is one of them faster than the other? I also looked into eclipse and not sure if that is something I should consider. Are there any major issues with eclipse and is it more stable than the other two? Honestly right now I am just trying to figure out where to start. I want to do something, but also want the easiest route so that I do not brick my phone as my wife would probably kill me, haha.
There is just so much info out there, I really don't know where to start. I know you guys probably get these questions all the time, but I could not find a specific thread that talked about just these two (or three) roms specifically for the DX2. I have been trying for the past month or two to research this stuff, and I have learned a lot, but I need a little help to push me in the right direction...
Oh, and if you couldn't guess I am on stock GB 2.3.4 unrooted...
kalojado said:
So hey all, I am new here so bear with me. I have been on Android for about a year and am finally ready to root and run a rom. Started out with a Samsung Fascinate which got traded for a Droid X and that got replaced with a Droid X2. Having some small issues with the DX2, and since I need to factory reset I figured I would go ahead and try to root and run a rom...
So my question is being a complete noob would I be better with CM7 or Miui. Originally on the DX I looked into Miui and really liked how it looked and really wanted it and did a lot of research on it, but before I could try it I had to send back my DX and they replaced it with a brand new DX2 in the box. Then looking into it I noticed that Miui was not available for the DX2, so I just gave up and stayed put.
Recently reading thru the forums I see Miui is available now for the DX2, but I also was looking into CM7 which also looks really nice. I was wondering would either of them be easier for a noob? (i.e. install and post install customization) I have read up on both not having functional FM radio and HDMI, which are not big deals because I rarely use either... but are there any other big problems with either of these roms that would make a noobie like myself steer clear from them and is one of them faster than the other? I also looked into eclipse and not sure if that is something I should consider. Are there any major issues with eclipse and is it more stable than the other two? Honestly right now I am just trying to figure out where to start. I want to do something, but also want the easiest route so that I do not brick my phone as my wife would probably kill me, haha.
There is just so much info out there, I really don't know where to start. I know you guys probably get these questions all the time, but I could not find a specific thread that talked about just these two (or three) roms specifically for the DX2. I have been trying for the past month or two to research this stuff, and I have learned a lot, but I need a little help to push me in the right direction...
Oh, and if you couldn't guess I am on stock GB 2.3.4 unrooted...
Click to expand...
Click to collapse
Eclipse is the most stable. Cm7 and miui are both betas and not everything works.. Cm7 is good for speed, and miui for crazy customization options.
Sent from my DROID X2 using xda premium
Jubomime said:
Eclipse is the most stable. Cm7 and miui are both betas and not everything works.. Cm7 is good for speed, and miui for crazy customization options.
Sent from my DROID X2 using xda premium
Click to expand...
Click to collapse
Can I ask if you were just starting out and never messed with any roms before, which one would you choose out of the three?
kalojado said:
Can I ask if you were just starting out and never messed with any roms before, which one would you choose out of the three?
Click to expand...
Click to collapse
Eclipse is likely the most stable, with CM7 following closely behind. MIUI is still in alpha. I haven't tried MIUI yet, but I've read people are having problems. For installing, they should all follow the same process.
Woops, accidentally clicked thank on your post. Oh well lol
kalojado said:
Can I ask if you were just starting out and never messed with any roms before, which one would you choose out of the three?
Click to expand...
Click to collapse
Definitely recommend eclipse for starting out.
Sent from my DROID X2 using xda premium
Well Eclipse is currently based on Android 2.3.5, which means if you decided on that ROM, you would have to update to 2.3.5 then flash the ROM. Then if you ever wanted to switch to a different ROM, you would have to go through the process of SBF'ing back to Android 2.3.4 since all other ROMs are 2.3.4 based. However, Eclipse is the most stable as was mentioned already. Now between CM7 and MIUI, both are great ROMs. MIUI has some issues with audio and video in some scenarios but still works well. Flashing ROMs isnt that hard so if you have the time, try them all out. Just have all the files ready to restore your phone back to health in case something goes wrong.
One other thing to think about between Eclipse (which is stable and the upcoming 2.0.4 release is really stable and fast) and CM7/MIUI is HDMI.
Eclipse still can output HDMI since it still has some of the BLUR components in it.
CM7/MIUI are both compiled from AOSP components and have ALL of the BLUR components removed, hence no HDMI.
So, if you use HDMI and it's deal-breaker for you, then Eclipse is definitely the way you want to go. But, stability is also nice thing for Eclipse.
I see the stability of the ROMs as follows with the most stable listed first:
Eclipse 2.0.X
CM7 Beta
MIUI
CM9 (not released yet but it has Ice Cream Sandwich)
I was on Eclipse 2.0.3, then went to CM7 and stayed there for awhile. Then, I got onto the Eclipse beta team and started testing 2.0.4. The latest 2.0.4 is the most stable I've seen Eclipse, after a few minor issues, but that's why were were beta testing it. Definitely, I'm sticking with Eclipse.
One thing I've noticed, no matter how hard you try to leave Eclipse, I'm always noticing that people keep coming back to it. That alone should tell you how great a ROM it really is.
Thanks everyone. Seems like maybe I should try out Eclipse first, which is fine. I do want the most stable rom when it comes to my first time... then if I am feeling adventurous later I can try out the others. I will go do a search and hopefully can find a post that lets me know everything I need to do in one post. Thanks again for all the help, if anyone else wants to chime in, please do, I am open to any and all suggestions!
Go here:
http://www.eclipserom.com/forum/viewtopic.php?f=17&t=46
Motcher has given a step-by-step explanation on how to get Eclipse 2.0.3 up and running. Once you have that, then when Eclipse 2.0.4 goes public, you'll already be set to flash it.
Eclipse 2.0.3 is here -> http://www.eclipserom.com/forum/viewtopic.php?f=17&t=11
Both of these links go to the Eclipse forums where Nitro posts all his releases now.
kalojado said:
Can I ask if you were just starting out and never messed with any roms before, which one would you choose out of the three?
Click to expand...
Click to collapse
kalojado said:
Thanks everyone. Seems like maybe I should try out Eclipse first, which is fine. I do want the most stable rom when it comes to my first time... then if I am feeling adventurous later I can try out the others. I will go do a search and hopefully can find a post that lets me know everything I need to do in one post. Thanks again for all the help, if anyone else wants to chime in, please do, I am open to any and all suggestions!
Click to expand...
Click to collapse
Eclipse is a good choice for your first time. It'll be gentle I promise.
kalojado said:
Thanks everyone. Seems like maybe I should try out Eclipse first, which is fine. I do want the most stable rom when it comes to my first time... then if I am feeling adventurous later I can try out the others. I will go do a search and hopefully can find a post that lets me know everything I need to do in one post. Thanks again for all the help, if anyone else wants to chime in, please do, I am open to any and all suggestions!
Click to expand...
Click to collapse
Lucky for you, motcher created this sticky in the Development forum here,
http://forum.xda-developers.com/showthread.php?t=1391824
[REF]How to go from any 2.3.4 stock/custom rom to any 2.3.5 (412) based custom rom
It has all the instructions you need in one place , it is all very easy also , don't be afraid of bricking your x2
We have this little thing called sbf, as long as you have a computer you will be able to bring you phone back from any "bricked" state if any problems happen.
just stay away from modifying any boot partitions or anything like that. Stick to basics like flashing roms and tweaks/mods/scripts that are found here in the x2 forum and you won't ever hard brick your x2 to the point of no return lol
if you are ever unsure about what exactly a mod/tweak/script/ROM/hack does to your phone then just ask before doing it, trust me tho, sbf is freaking great, so many times I've gotten "bricked" at the Motorola dual core splash screen and a quick sbf flash brings it right back...
And in case you didn't notice, I recommend eclipse enjoy, happy flashing, and welcome
Sent from my DROID X2 using Tapatalk
Thanks so much for the info! I was out searching and wanted to ask if there was a specific link I could get that I could trust, but I didn't want to bother you all as I am sure you get these same questions over and over again. So thank you so much for passing that along... such a huge help and I am gonna attempt it here in a few moments...
Yeah, I have read a lot about sbf'ing and some people still act like I should be worried about bricking my phone, but I have also read other places where people have stated they have yet to see a phone they couldn't get back. So I am gonna try this, and just follow it step by step so I don't screw anything up! Will let you all know how it goes. Again, I can't thank everyone enough for all the great info!!
kalojado said:
Thanks so much for the info! I was out searching and wanted to ask if there was a specific link I could get that I could trust, but I didn't want to bother you all as I am sure you get these same questions over and over again. So thank you so much for passing that along... such a huge help and I am gonna attempt it here in a few moments...
Yeah, I have read a lot about sbf'ing and some people still act like I should be worried about bricking my phone, but I have also read other places where people have stated they have yet to see a phone they couldn't get back. So I am gonna try this, and just follow it step by step so I don't screw anything up! Will let you all know how it goes. Again, I can't thank everyone enough for all the great info!!
Click to expand...
Click to collapse
Yea
I haven't seen anyone truly hard brick an x2
just stay away.from the mounts& storage options in BSR , and I think the only things you should touch in the advanced menu in BSR is wipe dalvik cache and battery stats...don't mess with anything else and you will be just fine brotha
Also, if there is anything you are to "embarrassed" to ask on the forum, then just shoot someone a private message my pm inbox is always open
And yes, when rooted and you are doing hacks and tweaks and such, you always have the risk of something going wrong, but like I said, never seen a truly hard bricked x2 that couldn't be fixed via sbf, ...you really gotta kinda be TRYING to brick for that to happen lol
ashclepdia said:
Yea
I haven't seen anyone truly hard brick an x2
just stay away.from the mounts& storage options in BSR , and I think the only things you should touch in the advanced menu in BSR is wipe dalvik cache and battery stats...don't mess with anything else and you will be just fine brotha
Also, if there is anything you are to "embarrassed" to ask on the forum, then just shoot someone a private message my pm inbox is always open
And yes, when rooted and you are doing hacks and tweaks and such, you always have the risk of something going wrong, but like I said, never seen a truly hard bricked x2 that couldn't be fixed via sbf, ...you really gotta kinda be TRYING to brick for that to happen lol
Click to expand...
Click to collapse
Okay one quick question. On the link you provided the very fist download, RSD lite is not available. When you go to download it you get "Such file does not exist or it has been removed for infringement of copyrights." I went into the eclipse forum and there is mention of it being updated, but that is all I can find. Do you know where else I could get this file?
http://forum.xda-developers.com/showpost.php?p=22117008&postcount=135
Someone else asked same question other day
that link shows my response
Also,
U said you were on stock 2.3.4 right?
you won't need to sbf if you are, just install the 2.3.5 update zip
Then root with zergrush and good to go
Unless you are just getting everything set up for just in case you need to sbf...which is a great idea also
Good luck
ashclepdia said:
http://forum.xda-developers.com/showpost.php?p=22117008&postcount=135
Someone else asked same question other day
that link shows my response
Also,
U said you were on stock 2.3.4 right?
you won't need to sbf if you are, just install the 2.3.5 update zip
Then root with zergrush and good to go
Unless you are just getting everything set up for just in case you need to sbf...which is a great idea also
Good luck
Click to expand...
Click to collapse
Yes, thats exactly what I was doing. I wanted to make sure I had everything just in case something went wrong. Just figured it would be good to have everything all set But thanks again... much appreciation!
Miui is my rom of choice when it's in full release candidate polish, and maybe eventually Ace's Miui4DX2 will get there. In the meantime, there's a battery-eating wakelock issue, app-by-app sound issues (sound sometimes just doesn't work), and some kind of rendering issue that slows Netflix/certain games/MX Video and various other media apps to a 1 frame per minute crawl. There's also an issue where wifi drops out periodically and doesn't reconnect unless you prompt it (or install a service like "Wi Fi Fixer" that toggles it for you).
So until Ace releases a better beta (which could be as soon as tomorrow, or as late as never), I'd count Miui out as a daily driver.
CM7 as a rom is great--not quite as pretty as Miui (and I find Miui eliminates a lot of the sloppiness in pre-ICS Android), but it is rock solid. DZK's build is an almost perfect CM7 build, except it has the same wifi connectivity issue as Ace's Miui. The advantages it offers more than compensate for the annoyance of having to run Wi-fi Fixer and every now and then waiting for wi-fi to reconnect.
I'm running CM7 on my DX2 and am quite happy with it. I'll give Miui another shot if there's another release (and I'm excited to see how DZK's CM9 runs), but CM7 is likely to be the best daily driver for the X2 for at least another month or two
Eclipse is Blur based (so it has the advantage of functional HDMI), but suffers from the slowdowns/choppiness/audio tearing when multitasking we all know Blur brings. Nitro did a good job of cutting Blur's visual crap out, and he built in a few useful scripts.
Eclipse is definitely better than stock, but if you're gonna go through the trouble of rooting and rom-ing, I'd go with CM7. There's also the issue jsgraphicart mentioned about 2.3.5 vs 2.3.4 requiring a couple extra SBFs if you ever want to switch to something else.
DaveRichardson said:
Miui is my rom of choice when it's in full release candidate polish, and maybe eventually Ace's Miui4DX2 will get there. In the meantime, there's a battery-eating wakelock issue, app-by-app sound issues (sound sometimes just doesn't work), and some kind of rendering issue that slows Netflix/certain games/MX Video and various other media apps to a 1 frame per minute crawl. There's also an issue where wifi drops out periodically and doesn't reconnect unless you prompt it (or install a service like "Wi Fi Fixer" that toggles it for you).
So until Ace releases a better beta (which could be as soon as tomorrow, or as late as never), I'd count Miui out as a daily driver.
CM7 as a rom is great--not quite as pretty as Miui (and I find Miui eliminates a lot of the sloppiness in pre-ICS Android), but it is rock solid. DZK's build is an almost perfect CM7 build, except it has the same wifi connectivity issue as Ace's Miui. The advantages it offers more than compensate for the annoyance of having to run Wi-fi Fixer and every now and then waiting for wi-fi to reconnect.
I'm running CM7 on my DX2 and am quite happy with it. I'll give Miui another shot if there's another release (and I'm excited to see how DZK's CM9 runs), but CM7 is likely to be the best daily driver for the X2 for at least another month or two
Eclipse is Blur based (so it has the advantage of functional HDMI), but suffers from the slowdowns/choppiness/audio tearing when multitasking we all know Blur brings. Nitro did a good job of cutting Blur's visual crap out, and he built in a few useful scripts.
Eclipse is definitely better than stock, but if you're gonna go through the trouble of rooting and rom-ing, I'd go with CM7. There's also the issue jsgraphicart mentioned about 2.3.5 vs 2.3.4 requiring a couple extra SBFs if you ever want to switch to something else.
Click to expand...
Click to collapse
Well hrmm, now you got me thinking about CM7 again, lol. I am in the process of downloading the Eclipse files and maybe I will look into CM7 some more before I proceed. Honestly, I am not at all concerned with the HDMI issue, as I rarely use it... but with that being said can you tell me any more issues with CM7 that would turn off a user from making it their daily rom? if no HDMI is the only issue, that is not a deal breaker for me...
kalojado said:
Well hrmm, now you got me thinking about CM7 again, lol. I am in the process of downloading the Eclipse files and maybe I will look into CM7 some more before I proceed. Honestly, I am not at all concerned with the HDMI issue, as I rarely use it... but with that being said can you tell me any more issues with CM7 that would turn off a user from making it their daily rom? if no HDMI is the only issue, that is not a deal breaker for me...
Click to expand...
Click to collapse
I had issues with apps sometimes hanging and having to kill them. Also, Super User would sometimes forget an app already had the permissions to run as root. Sometimes, I'd have to go into the application manager and tell it to stop the application and try again and then it would get the SU permissions.
With Eclipse, I've have never had this problem. Again, it just shows how Eclipse is much more stable.
As it is, I don't know how much farther Dragonzkiller will stick with CM7 since he's working on CM9 right now. He's been so busy trying to get CM9 out that any more development/enhancing of CM7 and curing the SU and hanging process issues seems to have stopped at this point. But, not pointing the blame at DKZ as he's one busy dude with CM9.
However, Nitro is constantly busy working on Eclipse and not just for the X2. He also does it for the Bionic, RAZR, Galaxy Nexus, and Droid Charge. I don't know how he does it!
Great points. Thanks for the info. I tried to thank your post, but being new I did not know I was limited to 8 thanks per day, lol. But I wanted to let you know I appreciated the feedback!