Related
Hi there,
Im looking for thin case.
Best I have found is this case on ebay
Design is not bad, but its not covering glass area around the camera.
Questions:
1. Is there any thin case(plastic, rubber) that covers that?
2. Anyone tried skins? Will they remove easily(considering phone is jeans pocket)?
3. Those who are using various rubber, gel, hybrid and so on cases, how much fatter is your phone with them? If its not that much fatter suggestions on good cases then
stifler05 said:
Hi there,
Im looking for thin case.
Best I have found is this case on ebay
Design is not bad, but its not covering glass area around the camera.
Questions:
1. Is there any thin case(plastic, rubber) that covers that?
2. Anyone tried skins? Will they remove easily(considering phone is jeans pocket)?
3. Those who are using various rubber, gel, hybrid and so on cases, how much fatter is your phone with them? If its not that much fatter suggestions on good cases then
Click to expand...
Click to collapse
Try looking into the otterbox defender, or ballistic hc.
b1gsby_02 said:
Try looking into the otterbox defender, or ballistic hc.
Click to expand...
Click to collapse
Thanks mate
I found this one, and I´ll go with that one probably
I have tried them all, best case is either the capdase brand or official HTC TPU case. They both let your phone slide into your pocket easy, don't bulk out your phone, look great and offer good protection.
The Ebay jobs are just cheap rubbish you get fed up with after a week or 2.
Sent from my HTC EVO 3D X515a using XDA
vervester said:
I have tried them all, best case is either the capdase brand or official HTC TPU case.
Click to expand...
Click to collapse
Any link for official HTC TPU case where I can find it
Look up the Kraken AMS. That is a reasonable case.
Alternatively just look for something like this: http://www.ebay.co.uk/itm/BLACK-HAR...sesPouches&hash=item3a6a2fac16#ht_1887wt_1396
Best thing about this type of case is it doesn't add too much bulk, and is easy to get in and out of your pocket (unlike a silicone/rubber case). And it will actually protect your phone in a drop unlike that case you linked to in your original post. As for your screen... only BIG cases include a plastic layer to completely cover the glass.
Are you just looking for something with raised edges, and then use a screen protector perhaps? (Like the ebay one I showed you).
http://www.amazon.com/Acase-Superle...1HVI/ref=sr_1_9?ie=UTF8&qid=1333169597&sr=8-9
this has been the best case for me so far, its very thin, and has a rubber skin with a hard plastic shell..the kraken, and defender are way to big for me. this case is just the right size its about the same size as a tpu case.
stifler05 said:
Any link for official HTC TPU case where I can find it
Click to expand...
Click to collapse
HTC EVO 3D TPU Case TP C630
Loads available in the UK not so sure about else where. Ebay perhaps, Amazon etc.
Well worth the extra few pounds.
Sent from my HTC EVO 3D X515a using XDA
@Scougar- that case looks good. Nit expensive, will order and try it
@jtgarza3- I know about Acase but the problem is I can't get it in my country(amazon ships books and kindle only) and I cant find it elsewhere. I believe it is the best case
@vervester- thanks mate, will try it
Still can't find a case I like better than the acase superleggra.... Look into that, wonder if there's anywhere you buy it that will ship it to you. its cheap and sounds like what your looking for.
Sent from my PG86100 using xda premium
stifler05 said:
Thanks mate
I found this one, and I´ll go with that one probably
Click to expand...
Click to collapse
My case looks exactly the same and it was £3 from amazon.
IMO the thinnest cases are the back cases ones that doesnt really cover the top and bottom bezel...just the sides and back. BUT if you really want to protect your phone and not get it scratched up over time, you are better off using a TPU type case as the are not too thick and are of softer material and will not rub off any of the black anodized paint. Unlike any hard cases, whether its back only or 2 pieces. Also TPU cases are more absorbent during accidental drop on hard surfaces.
I was running seidio 2pc case hard case w/kick stand with my first 3d and although it had felt inside it eventually rubbed off the pain on the top corners of my phone. The felt inside was very thin and the case is not skin tight so it would move some and the slight movement of the case over time eventually sandpapered some of the paint off. TPU or rubber type cases are more skin tight and is not as abrasive as plastic on painted metal and will not damage the paint so long as you also clean it off from time to time. Some dirt can eventually get in between and the dirt will act as sandpaper. So just consider this when you're buying a case as some of you would probably like to sell your phone later down the road or just want to keep it looking new for a long time.
Finally found ultra thin(slim) case
Whole line is here
http://www.obostore.com/index.php?m..._description=1&categories_id=144&keyword=case
stifler05 said:
Finally found ultra thin(slim) case
Whole line is here
http://www.obostore.com/index.php?m..._description=1&categories_id=144&keyword=case
Click to expand...
Click to collapse
Those thin cases are the exact same thing as the case mate barely there cases. Much cheaper. I got the rock brand and like it a lot. You do lose that boot of protection at top and bottom though.
Some people have complained that these type of cases are a bit loose on the sides. Easy fix is to lightly squeeze the sides inwards... tight fit!
Sent from my Transformer Prime TF201 using xda premium
mozman said:
Those thin cases are the exact same thing as the case mate barely there cases. Much cheaper. I got the rock brand and like it a lot. You do lose that boot of protection at top and bottom though.
Some people have complained that these type of cases are a bit loose on the sides. Easy fix is to lightly squeeze the sides inwards... tight fit!
Sent from my Transformer Prime TF201 using xda premium
Click to expand...
Click to collapse
I went tpu so far like how smooth and not bulky it is lol Ditched the kraken and ballistic
Sent from the Reaper
reaper24 said:
I went tpu so far like how smooth and not bulky it is lol Ditched the kraken and ballistic
Sent from the Reaper
Click to expand...
Click to collapse
TPU cases are awesome and super sturdy.
vanessaem said:
TPU cases are awesome and super sturdy.
Click to expand...
Click to collapse
I agree went with a blue one those cheap screen protectors work well if you can put it on without dust .
Sent from the Reaper
yeah but the Evo gets hot sometimes and having those extra layers , scared would mess the phone up because of heat.
tonedinh said:
yeah but the Evo gets hot sometimes and having those extra layers , scared would mess the phone up because of heat.
Click to expand...
Click to collapse
What case you talkin about? Haven't had any heat issues?
gtnote said:
Very thin Case made with TPU and PC comes with a screen protector and about $12 using 10% off coupon code xda,
http://www.kevikev.com/Yoobao-TPU-Silicone-Case-for-Sprint-HTC-EVO-3D-TPUHTCEVO3D.htm
View attachment 1024718
View attachment 1024720
View attachment 1024721
Click to expand...
Click to collapse
I got mine. The case even covers the camera also come with a screen protector which works well if you put it on str8 with no dust.. Tho the one you posted looks like it's for a extended battery.
Cost only 4 dollars 3 shipped
Hi all, I was looking to invest in a rotating case for my 7.7 (when I get one!).
Like this one on eBay here.
Has anyone tried these sorts of cases? What's your verdict? Ultimately I'd prefer something like this but it seems it only comes in sizes for the 7.0 Plus.
I have the rotating case and for me is better than the genuine case. I don't mind the slightly extra bulkiness. Thrown my genuine case into the drawer. Only my experience.
In my opinion I like better the original samsung case, I've seen those rotating cases and they look bulky and I'll never going to get use to that cylinder in the back. In the original case it just fits right, clean and not bulky at all, but again, that's my preference... The bad: it's a lot more expensive.
I also bought one of those plastic body covers and it was just a piece of junk!
I am currently using that case，not bad
quality good，no foul smell，I think 120gram
http://www.ebay.com/itm/360-Rotary-...K_iPad_Tablet_Accessories&hash=item256c68456b
Im also using this case now and its great! I got it from ebay hongkong seller for $14USD only with free shipping, no tax nor duties! Took around 15 business days to arrive here in Canada, case serves good protection, its good for right or left handed users and 360' stand option is really nice.
So overall its a nice case for its good price and its great quality.
Sent from my GT-P6800 using XDA
I've this one in brown and I like it.
It feels a bit cheap at first (I expected it at this price) and I'm still unsure about how long it will last, but I'm using it since about a month and no problems so far.
I'm mostly using it for watching videos in landscape-format and only in rare occasions for portrait, but if I'm holding it in the hand I can turn the folding part of the case, this way it hangs down and doesn't bother me.
My girlfriend is folding it, so it's really thick to grab and does feel more like a book than a thin tablet.
The display-cover-part is rather thick (because of the creasing for the stand) and the rest feels a bit elastic, so I think its a good protection for my tab.
On the other hand: It makes the tab around 2 times thicker and doesn't feel good any more in the pocket of my jacket.
In conclusion: I like it, and I did same some money in comparison to the most thin-cases.
But I'm still not sure if I shouldn't try something thinner too.
i have something similar and the zenus casing. Personally i perfer the zenus. The other casing is thicker and the rotation is too loose.
put a back protector on your tab before using this rotating sleeve/case
I have one and the plastic rotating link is eating its way at the back pannel
ThE_SoUrCe said:
put a back protector on your tab before using this rotating sleeve/case
I have one and the plastic rotating link is eating its way at the back pannel
Click to expand...
Click to collapse
I do not have any problems with this. Neither on the edges where the main connection is, nor on the back where the rotating part is.
ThE_SoUrCe said:
put a back protector on your tab before using this rotating sleeve/case
I have one and the plastic rotating link is eating its way at the back pannel
Click to expand...
Click to collapse
I had this problem did need a screenprotector to save the back of the tab
Skickat från min GT-P6800 via Tapatalk 2
Ok so I decided to get a more heavy duty case because I will be needing it for a couple of weeks.
Decided to grab the Supcase off amazon because it was the highest rated heavy duty case on there.
The case itself feels like it stands to the title "heavy duty." I say that because it does add a bit of weight to the phone, which i personally like.
The cut outs are spot on so there is no obstruction to anything and it have a dust cover for the headphone and usb ports.
The power and volume button is slightly raise which makes it easy to reach and press.
It also feels like it would be able to withstand a fall or 20 without there being any damage to the phone...
other than that there is nothing else that you can say about this case.
Now for the bad.
The rear camera cut out is lazy...by which i mean they expose the Motorola logo. and instead of creating a bright between the camera and logo. they just left a long cut out between them....bad design, because that doesn't really help protect against duty.
The back is a lot slippery which is a disappointment for a heavy duty case.
The included "screen protector" is just a flimsy piece of, well film...although it would be able to protect the screen from scratches it would not do anything if you phone fell at an angle which cause it to hit the screen directly.
Well on that note, because the SP is just a film...it does not lay flat against the screen which creates a giant haloing effect all across the screen....that is a MAJOR deal breaker for me.
**Edit**
Not really a pro or con just preference
Almost forgot...the include belt clip although sturdy, meaning it will stay in place, clips to the face of the phone, so you will not be able to check notification while using the clip...I find this annoying some might like the added protection in case you bang the screen against the edge of a table/desk or whatever else.
Conclusion...
This case its a 2.5/5
Chances are I'll only use this case for the next few weeks, then store it in a box somewhere until I need it again...You are better off with a good TPU case and Temper glass protector for everyday usage.
**Edit**
Turns out that not working out for a few people so I Heavy duty case without a built-in SP with a TGSP, maybe
I think I'm going to buy the ballistic tough jacket maxx
Sent from my Nexus 6 using Tapatalk
msd24200 said:
I think I'm going to buy the ballistic tough jacket maxx
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
That looks very nice....very expensive....but every nice
Gungrave223 said:
That looks very nice....very expensive....but every nice
Click to expand...
Click to collapse
On sale on Amazon.......http://www.amazon.com/Ballistic-Google-Nexus-Tough-Jacket/dp/B00QMGRW8E/ref=sr_1_1?ie=UTF8&qid=1420561409&sr=8-1&keywords=ballistic+nexus+6
mldiroff said:
On sale on Amazon.......http://www.amazon.com/Ballistic-Google-Nexus-Tough-Jacket/dp/B00QMGRW8E/ref=sr_1_1?ie=UTF8&qid=1420561409&sr=8-1&keywords=ballistic+nexus+6
Click to expand...
Click to collapse
Wish I had saw the earlier ?
I bought the supcase unicorn beetle and it's definitely a 4 out of 5.I admit the back is slippery and the camera cutout is lazy but I don't have a haloeffect on my front screen.maybe you got a bad one.I love this case a lot more than the ballitistic.This one alteast has style and fits the phone tight
Sent from my Nexus 6 using Tapatalk
shizkoff777 said:
I bought the supcase unicorn beetle and it's definitely a 4 out of 5.I admit the back is slippery and the camera cutout is lazy but I don't have a haloeffect on my front screen.maybe you got a bad one.I love this case a lot more than the ballitistic.This one alteast has style and fits the phone tight
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Umm I wish i could take a pic to show you... but if you say that your front face is flat against the screen so that you don't have that glaring effect where it looks like you have water trap underneath the screen, then maybe I will try to contact them to get a replacement.
I love the ballistic case on my lg optimus g pro. Figured it would make the n6 to big for my liking. I got the supcase and like it.
i do have the haloing and so does my wifes moto x2013 with her trident case. I can only see it with the screen off and at an angle so no real problem, plus dont have to deal with bubbles. I do agree its slippery and should be more tacky for a hd case but even the ballistic case on my old phone was slick on the back, only the corners were really grippy. I personally like the camera logo cutout. I would of liked it to include the nexus logo as well like the ringke max case I also bought. overall im happy with it, it is a bit big but i feel it is protected. I had the phone for a week and didnt use it until i got the cases for it. I have 2 kids and accidents happen.
88cavalierz24 said:
I love the ballistic case on my lg optimus g pro. Figured it would make the n6 to big for my liking. I got the supcase and like it.
i do have the haloing and so does my wifes moto x2013 with her trident case. I can only see it with the screen off and at an angle so no real problem, plus dont have to deal with bubbles. I do agree its slippery and should be more tacky for a hd case but even the ballistic case on my old phone was slick on the back, only the corners were really grippy. I personally like the camera logo cutout. I would of liked it to include the nexus logo as well like the ringke max case I also bought. overall im happy with it, it is a bit big but i feel it is protected. I had the phone for a week and didnt use it until i got the cases for it. I have 2 kids and accidents happen.
Click to expand...
Click to collapse
lol, I wish I hadn't used my phone the first week I had it without a case..and I would have like the cut a lot better if it was like the Ringke Max. Overall like I said the phone feels and is protected in the case, for instances I drop the phone in the gym last night (due to the slippy back actually, it really just slipped out my hand) and nothing happened happened to the phone. :victory:
The haloing i get with the screen both off and on, and from all viewing angles
Are there any slim but durable cases for the Tab S3 that have a good reputation?
I looked online for some Tab S3 cases. I see many offer a built in screen protector. I dont really care for that. But I did order a poetic revolution case. It came today. I was going to remove the built in screen protector & put a nicer one on. But I dont believe I will even use this case. Its ugly in person. The blue looked more electric blue in the adds. But it's more of a baby blue in person. Bulky and heavy too. It really takes away from the streamline thin elegance of this device.
NitroSS said:
Are there any slim but durable cases for the Tab S3 that have a good reputation?
I looked online for some Tab S3 cases. I see many offer a built in screen protector. I dont really care for that. But I did order a poetic revolution case. It came today. I was going to remove the built in screen protector & put a nicer one on. But I dont believe I will even use this case. Its ugly in person. The blue looked more electric blue in the adds. But it's more of a baby blue in person. Bulky and heavy too. It really takes away from the streamline thin elegance of this device.
Click to expand...
Click to collapse
These are much better than you would think.
Offer pretty good protection, will take the knocks. Makes the tablet easier to hold, adds no weight or bulk and finally does not spoil the natural looks of the tablet. Look great when on.
I use these now on all my devices.
https://m.ebay.co.uk/itm/For-Samsun...hash=item466daa920b:m:mXU9-Z8vWitRfvqYtUCKjzA
https://www.ebay.com/p/kwmobile-Cry...-T825-TPU-Silicone/815540353?iid=123016517922
I decided to get the UAG exoskeleton along with a LK ultra slim tpu case. Nice lightweight, looks neat & Spen holder. Helps keep the tablet cool too for mobile gaming.
NitroSS said:
Are there any slim but durable cases for the Tab S3 that have a good reputation?
I looked online for some Tab S3 cases. I see many offer a built in screen protector. I dont really care for that. But I did order a poetic revolution case. It came today. I was going to remove the built in screen protector & put a nicer one on. But I dont believe I will even use this case. Its ugly in person. The blue looked more electric blue in the adds. But it's more of a baby blue in person. Bulky and heavy too. It really takes away from the streamline thin elegance of this device.
Click to expand...
Click to collapse
I went ahead and got both the original Keyboard case and original Book cover. I did also get 10£ case from amazon, but it was such a low quality that I sent it back.
The original cases are really slick. Nice looking, thin and the magnets are quite good for adult use.
NitroSS said:
Are there any slim but durable cases for the Tab S3 that have a good reputation?
I looked online for some Tab S3 cases. I see many offer a built in screen protector. I dont really care for that. But I did order a poetic revolution case. It came today. I was going to remove the built in screen protector & put a nicer one on. But I dont believe I will even use this case. Its ugly in person. The blue looked more electric blue in the adds. But it's more of a baby blue in person. Bulky and heavy too. It really takes away from the streamline thin elegance of this device.
Click to expand...
Click to collapse
https://smile.amazon.com/gp/product/B0725CL4QV/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
I got the above in addition to the Samsung cover with keyboard. Needless to say I have been traveling with the composition cover above instead of the Samsung as most of the note taking I do is by hand.
I am using this case:
https://www.amazon.de/gp/product/B01N9R439E/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
Does not fit perfect but it is easy to use.
Does it have bigger size
What is ur size?
I have the 7.2 x 158,3 x 79,6 mm. I think the bigger one can be a complete fit
Have you a Screen protector
Have anyone install the free bumper case they give?
No i didn't installed that bumper case. I don't like the idea of glue anything on device. Imagine u got dust with big obstacles inside the bumper....and u can't remove it to clean it !!! Hell no
True that plus I don't want to make it more thicker when folding lol. How you loving it so far? What you use it for?
indrafendy said:
True that plus I don't want to make it more thicker when folding lol. How you loving it so far? What you use it for?
Click to expand...
Click to collapse
I thought im not gonna like this phone that much... because processor and google services...but damn i was wrong...our gpu (Mali-G76 MP16) running games more better than Adreno 640. (Extremely surprised) I guess its all about optimizations. Using all google services via browser like on any PC !!
I store my phone in sun glasses sleeve pouch lol better than nothing !!
I got a hair line scratch on mine, tiny but finding it hard to protect screen
iantaylor27 said:
I got a hair line scratch on mine, tiny but finding it hard to protect screen
Click to expand...
Click to collapse
It is a plastic screen with a screen protector on it, you will see little bumps and other imperfections. I do not like the case it came with, collects so much dust. I am waiting for the Leather Sleeve which should be here in the next few days, will get you an update on that. I keep my phone in my pocket and on my door panel pocket.
I m using this case. Best protection in my opinion. Search for neoprene universal case on amazon.
I am using it with the bumper case and the Huawei leather pouch together.
The case is conceived to be used without the bumper originally, but you can insert the plastic part of the bumper easily and it fits perfectly. (you can do it also as originally foreseen, so you can charge the phone when in the pouch but the rubber part of the bumper case is more difficult to pull our of the pouch. In any case, you get used to easily and you fill as you can use the phone as your daily driver.
Over the time, it gets even better as the leather pouch gets looser.
I hope it helps.
Best, Andreas,
I got this - fits almost perfect and protects every inch of the phone.
https://www.amazon.com/gp/product/B07YLXCNK3/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Case production idea
I am thinking to make my own case.
It will be a slide case with a glass sheet to use the big screen at all times, but you will need to slide the phone out to use the big screen.
I will make use it for a month before the selling point to make sure it really does the job.
I will keep you guys posted once I have made it and share the photos.
tarindersingh100 said:
I am thinking to make my own case.
It will be a slide case with a glass sheet to use the big screen at all times, but you will need to slide the phone out to use the big screen.
I will make use it for a month before the selling point to make sure it really does the job.
I will keep you guys posted once I have made it and share the photos.
Click to expand...
Click to collapse
Have u made the case