Hi,
recently i bought a retail dell streak.
it came with android 2.2.2 (stock).
i want to try streakdriod2.0, so i installed it.
i'm not satisfied with the performance, so i want to revert it back to stock(android 2.2.2).
I'm able to flash the dell recovery(351), then i'm downloaded 351 retail rom, from dell website.
After flashing the 351 ROM, it struck at dell boot logo, believe me i waited whole night in that screen.
Then i removed and reinserted the battery, then it shows a message like 'emergency recovery copy' then it will get restarted .
After that it will automatically takes me to the recovery. But the it will shows the recovery version as 347 ( i think it is reverting back to original (stock) recovery).Using the 347 recovery i flashed 351 rom, but the same things are happening again.
i've tried with all recoverys and roms, in xda form. none of them are working.
i've searched for 347 rom(which is the one i'm assuming as stock for me), but i'm not able to find any link for that.
Now i'm installed streakdriod 1.9 .
Is there any way for me to go back to stock os(android 2.2.2 ).
Sorry for my english.
Pls help me to get out of this problem.
This is an update to the post , as im describing the steps ive followed.
My device came with 347 (android 2.2.2) stock rom.(im not sure about this).
Currently i'm running streakDriod 1.9 ROM and StreakMod Recovery.
I'm trying to get back to stock ROM. These are the steps i followed.
1)Entered into fast boot, flashed amss.bin, DSP1.bin, and recovery for 351 official rom. And rebooted the phone.
2)When it reboots by pressing volume up and down at the same time, entered into recovery screen.
3)In recovery screen selected 'install update from SD Card'. It took me into the next screen.
4)Here it asked me to confirm the installation by pressing the camera shutter button. One more thing here is , i can see my recovery version as 351, which is good. Bcz installed 351 recovery via fastboot.
5)It will find the update package(351 official rom ) in SDcard and installs it successfully and reboots. Until now everything is working good as expected.
6)After reboot it will get struck at Dell Logo.
7)I removed the battery and reinserted. Once i turn on the phone, it will show a message 'Emergency recovery copy' and reboots. To stop this happening i tried to enter fast boot and recovery none them wont work.
8)After reboot it will directly takes me to the recovery second screen, where we need to press camera shutter button to confirm installation of update.zip like step 4.
Here i can see recover version as 347.That means device recovery got reverted back to stock 347.
9)if i install update(351 ROM) again here, it will install , reboots ,will struck at dell logo, we need to remove the battery, after inserting the battery it will show' emergency recovery copy' and reboots. Again i will come to the step 4.
It is like a cycle.
10)i tried with all versions of recovery copies and roms, which are shown in multirecovery thread.
11)I'm not able to find stock 347 rom, so i didn't tried with 347 ROM.
I think now i'm clear enough , so that everyone can understand my problem.
So what should i do. Help me.
my procedure is exactly like in this video, but the change is my device wont boot up, after installation.
http://www.youtube.com/watch?v=6Onq3qZaPF0
themaskofwraith said:
Hi,
recently i bought a retail dell streak.
it came with android 2.2.2 (stock).
i want to try streakdriod2.0, so i installed it.
i'm not satisfied with the performance, so i want to revert it back to stock(android 2.2.2).
I'm able to flash the dell recovery(351), then i'm downloaded 351 retail rom, from dell website.
After flashing the 351 ROM, it struck at dell boot logo, believe me i waited whole night in that screen.
Then i removed and reinserted the battery, then it shows a message like 'emergency recovery copy' then it will get restarted .
After that it will automatically takes me to the recovery. But the it will shows the recovery version as 347 ( i think it is reverting back to original (stock) recovery).Using the 347 recovery i flashed 351 rom, but the same things are happening again.
i've tried with all recoverys and roms, in xda form. none of them are working.
i've searched for 347 rom(which is the one i'm assuming as stock for me), but i'm not able to find any link for that.
Now i'm installed streakdriod 1.9 .
Is there any way for me to go back to stock os(android 2.2.2 ).
Sorry for my english.
Pls help me to get out of this problem.
Click to expand...
Click to collapse
Hi Mate,
Seems like you are stuck here. But don't worry the situation is not so bad it can be taken care of!!
I assume you already have the PKG of the 351 ROM which you tried installing.
Download the corresponding amss.mbn, DSP1.mbn and stock recovery.img
Once the download is done
Head to fastboot
Copy update.pkg to the root of SD (Make sure that the downloaded file is not corrupt it can also cause this issue)
Open Command Prompt with elevated permission
Set your phone into fastboot mode (Camera + Power Button) Tap on Fast Boot
Plug the USB cable into the system.
In command prompt go to the Fastboot folder
fastboot -i 0x413c flash amss amss.mbn
fastboot -i 0x413c flash dsp1 dsp1.mbn
fastboot -i 0x413c flash recovery 351recovery.img
fastboot -i 0x413c reboot
When the phone is rebooting immediately hold the Volume Up + Down keys to enter the RECOVERY
Select Software Update option and then at the Update screen press the Shutter Button to Start the Update
If everything is done as it is written, you will be back to stock
CHEERS MATE!!
GZSammy
Don't forget to hit the thanks button that's a lot of writing there!! LOL
@GZSammy Thanks for your reply
i'm gonna try your procedure.
I think flashing amss.bin and dsp1.bin will do the trick.
hi, can please give me any download link for amss.bin and dsp1.bin. im not really sure which version of them , i should flash.
i got the link for 351 file
im just posting them, bcz someone might need them.
http-://-mirror2.streakdroid.com-/manii/351/
remove - symbols
im struck again.
i'm happy that you are trying to help. i followed your procedure, but flashing amss.bin and dsp1.bin changed nothing.
i'm stuck at dell logo again and when i restarted my phone ishows' emergency recovery copy' and it will get restarted.
then it will take me to the emergency recovery tool , but i can i see that recovery version became 347 again.
Any better ideas ?
geo.samuel said:
Hi Mate,
Seems like you are stuck here. But don't worry the situation is not so bad it can be taken care of!!
I assume you already have the PKG of the 351 ROM which you tried installing.
Download the corresponding amss.mbn, DSP1.mbn and stock recovery.img
Once the download is done
Head to fastboot
Copy update.pkg to the root of SD (Make sure that the downloaded file is not corrupt it can also cause this issue)
Open Command Prompt with elevated permission
Set your phone into fastboot mode (Camera + Power Button) Tap on Fast Boot
Plug the USB cable into the system.
In command prompt go to the Fastboot folder
fastboot -i 0x413c flash amss amss.mbn
fastboot -i 0x413c flash dsp1 dsp1.mbn
fastboot -i 0x413c flash recovery 351recovery.img
fastboot -i 0x413c reboot
When the phone is rebooting immediately hold the Volume Up + Down keys to enter the RECOVERY
Select Software Update option and then at the Update screen press the Shutter Button to Start the Update
If everything is done as it is written, you will be back to stock
CHEERS MATE!!
GZSammy
Don't forget to hit the thanks button that's a lot of writing there!! LOL
Click to expand...
Click to collapse
Bruv,
Once you are done with the flashing of the amss and the dsp1 then the recovery, enter recovery and select the pkg to install... then it will state somethjng about the emergency software recovery press the shutter or the power button (dont remember which one) to start the installation.... happened with me in my earlier days i was sitting at that screen for hours and then i thought that it is screwed so attempted emergency recover... and the phone restarted with no changes... next run i was at the same screen and i discovered that after selecting the pkg we need to press power or i guess shutter button to initiate the installation... i guess u r facing the same issue..
If you are not sure which button to press, then press the opposite button stated for emergency recovery.
Eg. If it says press camera button for emergency software recovery then press power
And if power is written then press camera button.
And it will initiate the installation....
Sent from my Dell Streak while I was away from my Alienware
The only thing that I see missing is that when you finally try to reboot, no matter what you have flashed you need to do a Factory Reset, if not the Streak will not want to boot.
Thats also a good point..
Sent from my Dell Streak while away from alienware
steps i followed and making clear that what im facing.
My device came with 347 (android 2.2.2) stock rom.(im not sure about this).
Currently i'm running streakDriod 1.9 ROM and StreakMod Recovery.
I'm trying to get back to stock ROM. These are the steps i followed.
1)Entered into fast boot, flashed amss.bin, DSP1.bin, and recovery for 351 official rom. And rebooted the phone.
2)When it reboots by pressing volume up and down at the same time, entered into recovery screen.
3)In recovery screen selected 'install update from SD Card'. It took me into the next screen.
4)Here it asked me to confirm the installation by pressing the camera shutter button. One more thing here is , i can see my recovery version as 351, which is good. Bcz installed 351 recovery via fastboot.
5)It will find the update package(351 official rom ) in SDcard and installs it successfully and reboots. Until now everything is working good as expected.
6)After reboot it will get struck at Dell Logo.
7)I removed the battery and reinserted. Once i turn on the phone, it will show a message 'Emergency recovery copy' and reboots. To stop this happening i tried to enter fast boot and recovery none them wont work.
8)After reboot it will directly takes me to the recovery second screen, where we need to press camera shutter button to confirm installation of update.zip like step 4.
Here i can see recover version as 347.That means device recovery got reverted back to stock 347.
9)if i install update(351 ROM) again here, it will install , reboots ,will struck at dell logo, we need to remove the battery, after inserting the battery it will show' emergency recovery copy' and reboots. Again i will come to the step 4.
It is like a cycle.
10)i tried with all versions of recovery copies and roms, which are shown in multirecovery thread.
11)I'm not able to find stock 347 rom, so i didn't tried with 347 ROM.
I think now i'm clear enough , so that everyone can understand my problem.
So what should i do. Help me.
hi,
im explained the complete procedure above. can u tell me what im doing wrong .
and i think ur assuming that im not pressing the camera button in recovery screen. im doing it and im able to install the update package, but the problem starts after installation.
themaskofwraith said:
My device came with 347 (android 2.2.2) stock rom.(im not sure about this).
Currently i'm running streakDriod 1.9 ROM and StreakMod Recovery.
I'm trying to get back to stock ROM. These are the steps i followed.
1)Entered into fast boot, flashed amss.bin, DSP1.bin, and recovery for 351 official rom. And rebooted the phone.
2)When it reboots by pressing volume up and down at the same time, entered into recovery screen.
3)In recovery screen selected 'install update from SD Card'. It took me into the next screen.
4)Here it asked me to confirm the installation by pressing the camera shutter button. One more thing here is , i can see my recovery version as 351, which is good. Bcz installed 351 recovery via fastboot.
5)It will find the update package(351 official rom ) in SDcard and installs it successfully and reboots. Until now everything is working good as expected.
6)After reboot it will get struck at Dell Logo.
7)I removed the battery and reinserted. Once i turn on the phone, it will show a message 'Emergency recovery copy' and reboots. To stop this happening i tried to enter fast boot and recovery none them wont work.
8)After reboot it will directly takes me to the recovery second screen, where we need to press camera shutter button to confirm installation of update.zip like step 4.
Here i can see recover version as 347.That means device recovery got reverted back to stock 347.
9)if i install update(351 ROM) again here, it will install , reboots ,will struck at dell logo, we need to remove the battery, after inserting the battery it will show' emergency recovery copy' and reboots. Again i will come to the step 4.
It is like a cycle.
10)i tried with all versions of recovery copies and roms, which are shown in multirecovery thread.
11)I'm not able to find stock 347 rom, so i didn't tried with 347 ROM.
I think now i'm clear enough , so that everyone can understand my problem.
So what should i do. Help me.
Click to expand...
Click to collapse
At step 5, i would recommend once it reboots, press and hold the vol+ and vol- button again to go into recovery mode, then select option 1 to do a Factory Reset. Please do a backup just in case.
Another thing to try is, if you are back to StreakMod Recovery, boot into the recovery, do a wipe dalvik cache and wipe cache partition before flashing the stock recovery and rom. Again, please do a backup in case.
thanks for reply
maximoz said:
At step 5, i would recommend once it reboots, press and hold the vol+ and vol- button again to go into recovery mode, then select option 1 to do a Factory Reset. Please do a backup just in case.
Another thing to try is, if you are back to StreakMod Recovery, boot into the recovery, do a wipe dalvik cache and wipe cache partition before flashing the stock recovery and rom. Again, please do a backup in case.
Click to expand...
Click to collapse
i 've tried doing factory reset after step5, but it didn't help.
Is there anything else. i think i have two solutions.
1)Removing factory recovery (347)completely from the system. it may or may not solve the problem.
2)I need to find stock 347 rom, i think it will work.
I'm searched everywhere, but i couldnt find 347 rom.
is there any thing i can do for this problem.
themaskofwraith said:
i 've tried doing factory reset after step5, but it didn't help.
Is there anything else. i think i have two solutions.
1)Removing factory recovery (347)completely from the system. it may or may not solve the problem.
2)I need to find stock 347 rom, i think it will work.
I'm searched everywhere, but i couldnt find 347 rom.
is there any thing i can do for this problem.
Click to expand...
Click to collapse
finding a stock rom 347 is something which I guess you wont be able to do.
second option we already tried...i dont know why it is not working..
What i think is this that you need a Nandroid backup of a stock 351 0r 354 rom and you can restore the same from the streak mod recovery which i guess is already installed on your device...
Search in the forums I remember a guy asking for a nandroid backup files and someone uploaded it on a share....
Just check
If not then i will try to get you a nandroid image which I have but dont know where to upload...
geo.samuel said:
finding a stock rom 347 is something which I guess you wont be able to do.
second option we already tried...i dont know why it is not working..
What i think is this that you need a Nandroid backup of a stock 351 0r 354 rom and you can restore the same from the streak mod recovery which i guess is already installed on your device...
Search in the forums I remember a guy asking for a nandroid backup files and someone uploaded it on a share....
Just check
If not then i will try to get you a nandroid image which I have but dont know where to upload...
Click to expand...
Click to collapse
What else you an try is this that try any other retail dell rom probably 318 or any other build and if it flashes correctly and phone is able to boot, then try to install the later ones....my point is to get rid of any customization in the recovery......
I agree with geo.samuel, you have to get rid of custom recovery and make sure you are using the stock DELL recovery image so that you can flash an update.PKG instead of an update.ZIP.
It seems you are knowledgeable enough to get into fastboot, so go to the DELL Streak WIKI at this link
http://forum.xda-developers.com/wiki/index.php?title=Fileell_Streak.png
and download the recovery image and PKG of your choice (rename the .PKG file to "update.pkg"), I would suggest 354 or 351.
Flash the recovery image from fastboot (now I have a question, when you are in fastboot, do your commands take or are you just taking for granted that your computer is pushing the command?) I have to ask that, sometimes it won't take. If so, then execute the reboot command from the command terminal also.
As geo and others have said, when you see the DELL logo come up, push both camera buttons to get into recovery mode. Choose option 2 to find the update.PKG file you have placed on the ROOT of your SD card. Now at this point, if it allows you to choose the "update.pkg" file you downloaded. If it's asking for an "update.zip" file, then something in fastboot didn't succeed and you need to check your drivers and start with that process all over again.
Now, once you have gotten it to take the flash of the "update.pkg" file on your SD card it will reboot, now give it a few minutes, even if all was successful, it could take up to 15 minutes for it to get beyond the DELL logo. If it stays stuck there, then do a battery pull at least once more before trying to do a factory reset from the stock recovery.
Why is the OP not using MultiRecovery Flasher to flash his recovery image? He'd have a far easier time using that than manually issuing the fastboot commands. Plus it includes all the recovery images that are on the wiki.
Strephon Alkhalikoi said:
Why is the OP not using MultiRecovery Flasher to flash his recovery image? He'd have a far easier time using that than manually issuing the fastboot commands. Plus it includes all the recovery images that are on the wiki.
Click to expand...
Click to collapse
+1
Sent from my Dell Streak while away from alienware
geo.samuel said:
+1
Sent from my Dell Streak while away from alienware
Click to expand...
Click to collapse
for ur information im already using the multirecovery and im mentioned that. Ive tried using all roms and recoverys which are available in wiki.
themaskofwraith said:
Hi,
recently i bought a retail dell streak.
it came with android 2.2.2 (stock).
i want to try streakdriod2.0, so i installed it.
i'm not satisfied with the performance, so i want to revert it back to stock(android 2.2.2).
I'm able to flash the dell recovery(351), then i'm downloaded 351 retail rom, from dell website.
After flashing the 351 ROM, it struck at dell boot logo, believe me i waited whole night in that screen.
Then i removed and reinserted the battery, then it shows a message like 'emergency recovery copy' then it will get restarted .
After that it will automatically takes me to the recovery. But the it will shows the recovery version as 347 ( i think it is reverting back to original (stock) recovery).Using the 347 recovery i flashed 351 rom, but the same things are happening again.
i've tried with all recoverys and roms, in xda form. none of them are working.
i've searched for 347 rom(which is the one i'm assuming as stock for me), but i'm not able to find any link for that.
Now i'm installed streakdriod 1.9 .
Is there any way for me to go back to stock os(android 2.2.2 ).
Sorry for my english.
Pls help me to get out of this problem.
Click to expand...
Click to collapse
I don't see any mention of MultiRecovery Flasher here. In any event, when you flashed the recovery image did you boot back into StreakDroid, download the ROM, then go back into recovery?
What you should have done, at least according to Radimus' Guide to Flashing the Streak, is to have the update.pkg on the SD Card before flashing the recovery.img. That way, once the image is on the Streak you can simply hold down volume up and volume down while the Streak reboots. From there, you restore the ROM.
Check your drivers. Reinstall the drivers if necessary, and then follow the instructions in the guide.
Related
I have the stock 2.2 on my streak. I have the latest clockwork mod instal. everything about the program works fine except trying to reboot the phone into clockwork recory mode. anyone have the same issue, please help.
Did flash the recovery before u rebooted? You are running stock 2.2. So you will need to do this everytime. Dell set it where the stock recovery overwrites clockwork. Also make sure. U are holding down the volume buttons when you enter the reboot
Command in the command prompt.
Sent from the Iphone Killer
Negative, I have flashed the latest clockwork flash on my phone and even have tried to do so right before I choose to restart. but while holding the volume keys and to get to the recovery screen on the phone ( phone only, no data cable involved ) it tells me to reinstall from update.pkg and if I choose to do so, which is what some people have stated is what gets them into clockwork recovery.... I only get a black screen and have to do a battery pull at that point.
How did you flash the CWM?
Have you tried StreakMod Recovery instead?
http://forum.xda-developers.com/showthread.php?t=840326
c0ugar91 said:
I have the stock 2.2 on my streak. I have the latest clockwork mod instal. everything about the program works fine except trying to reboot the phone into clockwork recory mode. anyone have the same issue, please help.
Click to expand...
Click to collapse
If you have a PROBLEM with Clockwork then can you please post in the Clockwork thread and not in open forum thankyou
Post Closed
I've spent my entire day trying to flash a recovery image on my streak to no avail. I've rooted it using the super one click, have superuser on my device, along with clockworkmod.
I've confirmed my device is rooted using z4root.
I've tried flashing the recovery via clockwork, it says it was successful, yet when I reboot to recovery, I always end up in the regular OS, like all it did was reboot. Furthermore, trying to manually get there, holding down the buttons, tells me that the stanard recovery wasn't actually overwritten. When I go through fastboot and flash it that way, both computer and streak tell me that everything was successful. Yet, the recovery was still not overwritten.
My end goal is to put Steve's ROM on the streak, but I can't even get the recovery overwritten with clockworkmod.
I have a Dell Streak OEM:340. Thats the locked ATT version, which I think might be a part of the problem.
How do I end up with Steve's rom?
Sounds like you are using ROM manager? That does not work well with the Streak. See this article. ROM manager may actually flash your recovery, but does not work to start the phone in that mode.
You can flash the recovery image to your phone in fastboot mode. Here is a tool to help.
You get to fastboot mode by starting the Streak while holding the camera and power buttons at the same time. Then select fastboot from the top right of the screen and plug your phone into your computer. You will need the Dell drivers for this.
Also be aware that you need to rename install-recovery-sh to something else to prevent the stock recovery from being installed when the phone restarts. It's in the folder /etc. You have to use root explorer or an alternate method to do this, but it requires root.
I am using a ROM manger, but if that doesn't work as well, I'll stop.
I've been fastbooting it the majority of the time, flashing the ROM, but it says I've done it correctly, even though I obviously haven't. So far, all I know is that it's been rooted, and the recovery flashed via fastboot.
kyrillos27 said:
I am using a ROM manger, but if that doesn't work as well, I'll stop.
I've been fastbooting it the majority of the time, flashing the ROM, but it says I've done it correctly, even though I obviously haven't. So far, all I know is that it's been rooted, and the recovery flashed via fastboot.
Click to expand...
Click to collapse
Have you renamed the install-recovery.sh file so that the custom recovery won't be replaced by the stock recovery when you reboot? If not - do so.
Make sure that the Streakdroid rom you want is in the root of the SD Card along with the install.txt file.
If you can get into fastboot mode and connect to your computer I suggest using MultiRecoveryFlasher Streakmod recovery. You can reboot the phone from there also.
When you reboot you want to get to recovery mode. Turn your phone off then press the power button tile the leds light up and as soon as they do hold down BOTH volume buttons. See this gallery for what Streammod recovery should look like. Selecting the #2 option will take you to the streakmod recovery options. You use the "apply sdcard:update.zip" to install the ROM.
See the release thread for the ROM you are installing for more info and post any problems or questions you have with the ROM in that thread.
I have not renamed the install-recovery.sh file. in fact, haven't seen one through the process. To be honest, I'm not sure this part has been done at all by me. How do I go about doing that?
Furthermore, choosing the second option in recovery doesn't give methe streakmod options, it just tells me everything will be erased (stock Dell recovery). How do I make sure that this gets corrected?
For the record, marvin02, thank you thus far for the amount of help you've been giving me.
kyrillos27 said:
I have not renamed the install-recovery.sh file. in fact, haven't seen one through the process. To be honest, I'm not sure this part has been done at all by me. How do I go about doing that?
Furthermore, choosing the second option in recovery doesn't give methe streakmod options, it just tells me everything will be erased (stock Dell recovery). How do I make sure that this gets corrected?
For the record, marvin02, thank you thus far for the amount of help you've been giving me.
Click to expand...
Click to collapse
The file install-recovery.sh is a script that runs each time your phone is started. It will replace a custom recovery (streakmod) with the stock recovery when your phone starts, so the next time you enter recovery mode you are back at the stock recovery.
If you are going to dstay with a stock ROM, but want a custom recovery you have to rename the file. The easiest way (IMO) is to use Root Explorer which is an app you have to buy. You just open root explorer and the open the folder named etc and find install-recovery.sh long pres on it to get a menu to pop up and then select rename.
You don't have to do that to get a streakdroid rom installed if you enter recovery without letting the phone restart first.
Put the streakdroid rom file and the install.tx on the root of your SD card
Turn your phone off
Turn phone on in fastboot mode (camera and power buttons at the same time)
Use this tool to to flash the recovery you want
Using the same tool you can reboot the phone
As the phone reboots (wait for the leds to turn on just like they do when you restart the phone) hold down BOTH volume buttons to enter recovery. If you let the phone boot normally and you have not renamed install-recovery.sh the custom recovery will be over written.
Select option 2 and you should be taken to the streakmod options (images here)
Select apply sdcard:update.zip from the recovery menu
There will be two options on the next screen, select the one that lets you navigate to/select a file and then select the ROM file you put on your SD Card.
The ROM should install, be patient when it reboots it can take a few minutes.
Hello, I need some help trying to install the 1.9 ROM. I just purchased a Dell streak coming from an Iphone. Because of a deteriorating eye condition the big screen is a blessing. I bought it used on ebay. It originally had stock 1.6 which i upgraded to stock 2.2 (340) by downloading and running the pkg file. It was very easy to do. Im an att customer this is the relevant information regarding my version of 2.2 .
Version 2.2
Baseband GAUSB1A134031-US
Kernel 2.6.32.9
Build 14844
I have read through these forums extensively particularly the "how to" forums for days. After reading all the various variations for upgrading the rom (my phone lags and i want to see if the rom upgrade will fix this) I developed what I though was the proper procedure for installing 1.9. These are the steps i followed:
1. Install Android Drivers
2. Enter Fastboot mode
3. Installed Clockword Mod Recvery
4. Loaded the install txt file and 1.9 zip file on root of sd card.
5. Flashed the Clockword Mode Recovery IMG using fastboot. Fastboot said recovery was "done"
6. Rebooted.
7. Went into recovery mode by pressing Volume UP and Down and power button
8. Chose option 2 upgrade from SD card.
now its my understanding that doing so was supposed to take me to the clockmod recovery screen which would then give me the option of upgrading from the zip file. Instead I get a message in light blue which says in part
"Android System recovery utility GAUSb1a134031
To perform emergency software recovery you will need to insert SD card"
I then pull the battery and reboot and it boots up fine into the stock 2.2.
Now the question is what am i doing wrong. Im thinking that maybe its the baseband? and that I need to flash a new baseband. If anyone can help it with some guidance it would be much appreciated.
3.
Once you flash Clockwork you cannot let it boot. The OS will over-rite Clockwork. As soon as you flash Clockwork, hold both volume buttons down while it is rebooting. Selet option 2 and you should get the Clockwork menu.
Thank you i will give that a try
Didnt work. I do the fastboot recovery flash which it indicates is done. I then give the flashboot reboot command As soon as it starts rebooting i hit the volume up and down and power buttons but it still reboots into stock 2.2. I don't even get the recovery screen
Fuigured it out i only needed tto hold the volume buttons. Now im there thanks again
Hmm, you should be getting a recovery menu either way. The only thing I can think of is to try and hold both volume and power buttons down at the same time. This is how I normally access the recovery menu when not flashing the reboot comand. If thats not it, may be an issue with the recovery image. Have you considered StreakMod Recovery?
mdb4403 said:
Fuigured it out i only needed tto hold the volume buttons. Now im there thanks again
Click to expand...
Click to collapse
Ok, Cool!
Hello,
I recently tried to install custom firmware for my dell streak, However, my device
is android 2.2.2, and I tried to install superboot ver 2.1 (Cuz a misleading
comment on a web site mentioned its ok to root the system by it), my dell
suddenly rebooted in an infinite loop. I tried to enter the recovery menu by
holding the volume buttons and then choosing recovery. Also, I downloaded
Streak_309_11548_00.pkg and hoped this would work, but a stupid error
had occurred, bad, just bad file at the middle of verification process.
Anyway, I cant install clockworkmod because there is no way to root the
device, besides I dont have any back-up image of the streak.
please forum help me, the phone is almost new ( 2 tweeks of use only)
and I will pay if your solution work.
Regards and dont flame me, Im a new android user.
tried an older update, new error
Status 2???!!!
You do not have to be rooted to install a custom recovery. You do have to 'catch' the phone as it reboots by holding the volume up and volume down buttons as it reboots after the fastboot reboot command. If you let it boot into a stock rom the stock recovery will overwrite the custom ROM.
Use StreakMod Recovery if you want a custom Rom.
You need to slow down and do some reading before you go any further.
Suggestions;
Streak Wiki
Universal instructions for flashing any ROM and FAQ
Making a custom recovery stick
Using StreakMod Recovery
Do you know what baseband is on your phone? If you do DL the rom from the Streak WiKi, rename it update.pkg and put in on your SD Card, do not put it into a folder. Start recovery and select to install the update.pkg. You probably got the error when you attempted to use BB 309 because the recovery and the rom you attempted to flash did not match. They need to match so keep trying until you get the correct rom for the version of the recovery that is on your phone.
You could also use fastboot to install StreakMod Recovery, use the fastboot command to rebot the Streak, As soon as the reboot process starts hold down both volume buttons to get to StreakMod. If you use StreakMod you could install SimpleStreak or StreakDroid 1.9.1.
There are links to useful references in my signature.
Good luck.
PS - your Streak is not bricked as long as you can get into recovery, fastboot or your can connect to your computer and the QDLTool will see it.
Im in recovery menu now and If I click
Software upgrade via Update.pkg
the screen goes blank and then just nothing.
K clockworkmod works now
tell me what to do next.
I tried to install streakdroid 2 and its works WOW, thanx to you.
one last question how to install the latest baseband from the following link.
http://forum.xda-developers.com/showthread.php?t=1091236
sadly the link isnt available.
Don't worry about the latest baseband. If it boots up for you, I would stop there for now. If you were on 2.2.2, then you have either 351-354. Any of those will work for you.
tenorntex said:
Don't worry about the latest baseband. If it boots up for you, I would stop there for now. If you were on 2.2.2, then you have either 351-354. Any of those will work for you.
Click to expand...
Click to collapse
First, I would like to thank you and the forum for your help.
I have experienced a low graphical performance, and Im thinking to roll back
to the latest DJ_steave's custom firmware (2.2.2), However, I can access to
clockworkmod by pressing both volume buttons and then choose the recovery
option, thats weird since almost all tutorials mention that if you want to access
that mod, you have to press the volume up button along the power button.
For now Im waiting for a response whether to downgrade the firmware or
keeping the streakdroid 2.
Regards.
if everything is working then i suggest before trying anything else. do a nandroid backup first, (by going into recovery then advanced and then you see a nandroid backup option)
And i feel streakroid recovery package is preferred for streak as it is designed for streak only and works great.
lesson = homework
HI
I have read many of the Forums and seen Various Videos on how to install new ROMS onto the dell streak.There are dedicated members who contribute to these forums.i THANK THEM FOR THEIR TIME..I have a couple of questions ?
I have updated my streak from PKG 351 to 360 and this was straight forward and I did not need to change the recovery as I am from region 00
1.I followed all instructions and loaded Fastboot with Dell drivers but when I updated the recovery file there was no indication that this was carred out.
2.I know the next step is to update the PKG but I am not sure if the recovery was loaded.I looked at the information on the phone and its still E.U
3.I want to install Latest Olleh rom
Thanks
In recovery mode after you select "update from sd" it will show the version of the recovery.
You may try to flash over existing recovery even if its not 350, it will just fail. But it will no harm to your prone
Hi
I have used this as my guide
http://forum.pocketables.net/showthread.php?t=9694 ( I used XP before and could not get it to work.I am on windows 7 now and I got fastboot to work
Recovery IMG and PKG file is on SD card
1.Recovery file is run as and update Pakage ?
1. Verfy version of recovery - boot in recovery mode and choose "software update via update.pkg on sd card" (I've already flashed to 407 olleh, so I cant say what id got 350 recovery. You may ask someone who still got 350 recovery, or wrote it down)
2. If version is correct - flash.
Again - you may flash on any recovery, but success is guarantied only on 350.
Don't forget - YOU WILL LOSE ALL DATA EXEPT FILES ON SD CARD AFTER UPGRADE
By the way that guide is exhaustive
Hi
My issue was that I downloaded the IMG but did not run it as update.
I am running on 407.I wll see how this ROM functions and it might be time to add some custom Roms ;-)
It was easier using Windows seven when using Fastboot.
Thanks
Sent from my Dell Streak using XDA App
Trouble with update.pkg
I've tried 5 times to flash the 407 rom. I flashed the 350 recovery in fastboot. I put the 407 pkg on the root of my streak sd card,renamed it to update.pkg.Then booted into recovery and opted to apply update.pkg from sd. It says the update is applied, but just stays on Dell screen. The only thing I have done different from the guide is I havent been rebooting through fastboot, just pulling battery after recovery is flashed. Any ideas?
thomascw said:
I've tried 5 times to flash the 407 rom. I flashed the 350 recovery in fastboot. I put the 407 pkg on the root of my streak sd card,renamed it to update.pkg.Then booted into recovery and opted to apply update.pkg from sd. It says the update is applied, but just stays on Dell screen. The only thing I have done different from the guide is I havent been rebooting through fastboot, just pulling battery after recovery is flashed. Any ideas?
Click to expand...
Click to collapse
reboot via fastboot (fastboot reboot) and go directly into recovery by holding the volume up and volume down buttons.
If that doesn't work flash the 407 recovery instead, reboot using fastboot directly into recovery and install the update.pkg from there.
You mean the 407.pkg? I couldnt find the 407 recovery img
Marvin,thanks, apparently that last step(rebooting via fastboot and going directly to update was critical). I'm actually running Longhorn 2.1 v2 now and am liking it so far. I'll run it for a while.
thomascw said:
You mean the 407.pkg? I couldnt find the 407 recovery img
Click to expand...
Click to collapse
Nope - I meant the recovery. You can find it here.
thomascw said:
Marvin,thanks, apparently that last step(rebooting via fastboot and going directly to update was critical). I'm actually running Longhorn 2.1 v2 now and am liking it so far. I'll run it for a while.
Click to expand...
Click to collapse
Glad you got it sorted. FYI - when you want to thank someone for a useful post click on the thanks button for that post.
Trying the 407 recovery now, the 350 didnt work even when rebooting via fastboot. Im sure the proper recovery is being flashed as they ended in 35014 and 40714 just before flashing update.pkg. Still on dell logo, going to wait 5 more minutes. Does my phone being rooted affect anything?
finally got there, probably took 20 attempts. Was going from custom gb rom via streakdroid recovery. flashed streakdroid 1.9.1,then recovery 350 and 407 update.pkg,then factory reset . I do have flashing lights , so going to try reflashing bb
Problems in update
I have downloaded 407 and moved to my sd. I have then reboot to update the pkg. But I might unable to download any recovery both 350 and 407. Says content is not supported by this phone. The I have version 355 version. Pls help
I have got a stock 2.2 ROM, so I decided to update the PKG and recovery using Fastboot. I did the recovery bit fine but it's taking its sweet old time with the update.pkg, is this normal?
Btw, I'm in the UK so I got the latest O2 version 319, build 12792 which matches what it says in the about phone section.
Could be because I'm updating with the same pkg that it's not got anything to update, if that makes sense!?
If so, how do I know I have streakmod installed then? Can I remove the pkg file from the SD Card and try accessing the boot menu then going to option 2?
EDIT- It hasn't updated because when I try and update it again when there is no pkg file on the SD card, I get a blue message from Dell Update Utilty or something.
When I did try to update it, I had left it running for 30 mins but there was simply a black screen. The guide from-
http://forum.pocketables.net/showthread.php?t=9694
says it should take around 10-15 minutes though, so is this normal?