I got clockworkmod working fine, but I am unable to loan ROMs. Whenever I downloand a ROM it opens in muiltiple files and it also happens with TNT, Thi is where Im stuck
Step 3.
Copy whatever ROM you wish to install (it should be a .zip file) to the ROMs folder on your tablet. (Leave it zipped, Clockwork will install it from the .zip file as is). trying to get VEGan 5.1 final
Note: If the ROM you downloaded has multiple files, look for the one named “update.zip” and rename it to whatever you want (something to help you differentiate it from other ROMs), then copy that to the tablet. If an “update.zip” doesn’t exist, and you’re lost…read through that ROM’s thread and see if anybody else asked about it…if not then you probably should (on that ROM’s thread…each one is different).
I cant fiqure how to get the update.zip. When I do open the files i get 3 files
META_INF,boot, and system. I tried to copy and paste all three files in the ROMs, but it never show the update.zip
You don't need an update.zip with clockworkmod recovery... you just need the rom that is zipped and can be named anything.
Stop unzipping the rom you are downloading and just copy it to your device. Install that with clockworkmod recovery.
Sent from my Viewsonic 10" GTab...
novicexda said:
I got clockworkmod working fine, but I am unable to loan ROMs. Whenever I downloand a ROM it opens in muiltiple files and it also happens with TNT, Thi is where Im stuck
Step 3.
Copy whatever ROM you wish to install (it should be a .zip file) to the ROMs folder on your tablet. (Leave it zipped]/B], Clockwork will install it from the .zip file as is). trying to get VEGan 5.1 final
Note: If the ROM you downloaded has multiple files, look for the one named “update.zip” and rename it to whatever you want (something to help you differentiate it from other ROMs), then copy that to the tablet. If an “update.zip” doesn’t exist, and you’re lost…read through that ROM’s thread and see if anybody else asked about it…if not then you probably should (on that ROM’s thread…each one is different).
I cant fiqure how to get the update.zip. When I do open the files i get 3 files
META_INF,boot, and system. I tried to copy and paste all three files in the ROMs, but it never show the update.zip
Click to expand...
Click to collapse
you've answered your own question, the rar or zip file you downloaded might be in diff names, but always leave it in zip format. if in rar, unrar and the zip file should be in it.
in clockwork recovery, you can update by update.zip or choose your own zip
tcrews said:
You don't need an update.zip with clockworkmod recovery... you just need the rom that is zipped and can be named anything.
Stop unzipping the rom you are downloading and just copy it to your device. Install that with clockworkmod recovery.
Sent from my Viewsonic 10" GTab...
Click to expand...
Click to collapse
That is my problem, if automaticly unzips when it downloads. I am not sure if its my windows setting becaue I am unable to download TNT lite because I keep getting " windows can no opem" message. Is there a way i can prevent it from unzipping? Thanks BTW
maybe use a diff browser to download or right click on link and "save as"
You might be hitting open instead of save ...
down load it direct to your Gtab
Download the file directly to your tab. Use ES file explorer to move it to your SD card if necessary. Reboot in to clock work - choose file from SD card-select it and install.
I posted this on the fool proof thread for going from 3588 to 4349. Having troubles and looking for help.
NVFlash confuses me.
I basically just want to install a good 1.2 based ROM and stick with it. Have no intention of going back top 3588.
How do i make it so that if i ever do brick the device or have a need to go back, it just starts as if 4349 is my starting point?
My problems using the foolproof method is that the external SD card i purchased an loaded the necessary files to was not recognized when i followed the choose sdcard/update from sdcard instruction. I am thinking it might be looking for internal SD card as i definitely put the files on it and partioned per intructions...
Anyway, did work or i messed up somehow - looking for alternatives.
Thanks
Okay...I located the file from one of Robeet's threads.
New/additional question to any who view and have know-how/skills:
In his thread he mentions to flash to 4349 DO NOT use CWM. Well, that was teh first thing i did - install CWM.
How do i go about uninstalling?
I also noticed mybe some of my earlier troubles were in that my command file was created in notepad (he warns against file extensions).
Hendge said:
Okay...I located the file from one of Robeet's threads.
New/additional question to any who view and have know-how/skills:
In his thread he mentions to flash to 4349 DO NOT use CWM. Well, that was teh first thing i did - install CWM.
How do i go about uninstalling?
I also noticed mybe some of my earlier troubles were in that my command file was created in notepad (he warns against file extensions).
Click to expand...
Click to collapse
You can still use CWM to flash the stock firmware from teh source he provides. Let me guess, his file is a rar file, when unzipped, you are left with a file called "update.zip" and a folder called "recovery" with a command file in it.
What this is, is the format used to flash something using stock recovery. If you do not have CWM, you'd turn on your tablet, holding +, and it will "see" the recovery file, which will let it know to run the update.zip file.
Since you HAVE CWM, all you need to do is "install zip from SD" and install the update.zip file, just like you would any other rom.
to keep it organized, I suggest you rename it 4349.zip, or stockfirmware.zip, etc.
but yeah, it's completely possible to do it through CWM
as for the "command" file, yes, if it's created in notepad on a windows machine, it will be command.txt. you can't have the .txt part. I use notepad++ to creat files without extensions. You can also do it on the tablet using ES file explorer, root explorer, etc...
Thanks so much for replying!!
Let me ask you or anyone else who knows - When you write "install zip from SD" are you referring to the external or internal?
One more possibly one of the silliest questions that can be asked: How do you move files from one drive to another on this device? I was toying around last night with teh file explorer program and honestlt could not figure it out. I do not use a mouse or anything - normally i would cut/copy and paste teh file to desired location.
Please Help. Thanks again!
SD is generally the internal, MICROSD or SDCARD2 is the external.
Re: The windows notepad. If you want to save a file without the .txt extension or to change the extension simply Save As and put quotes around the name.
I had downloaded a version of this file from a post embedded deep inside one of the threads over here (sorry can't find it right now), but upon examination of its contents, I discovered some issues:
1. The checksums on the files in contained in the the original zip file showed that B&N had at least two versions of 1.3.0 update you can download from them, and the zip I got contained an older version so I put in the latest files in there.
2. There were unnecessary files included inside the original zip file, I deleted those, and only included what was needed.
3. There were errors in the script syntax, which I corrected, so that the proper commands are run during the update, and the proper sed substitutions are made during the editing of the unpacked init.rc inside the ramdisk.
What this zip will do is replace any older version of a B&N ROM on the alternate eMMC partitions of a dual booting configurations to the latest versions. This will prevent B&N from pushing the 1.3.0 update to you OTA, and messing up your dual boot setup. Just put the zip on your sdcard, boot into CWM recovery, and apply the zip. I apologize in advance for not giving credit to the original creators of the scripts here.
Note: There have been two different protocols for a dual booting u-boot.bin, with an older one relying on the files u-boot.altimg, and u-boot.altram to specify the names of the secondary boot ramdisk and kernel, and a newer one assuming that they are named uAltRam, and uAltImg respectively. This update conforms to the new u-boot.bin protocol. If you are still using the old one, you will have to get root access to /boot and edit the two files to point to uAltRam and uAltImg.
So if you want try it out, here it is:
http://www.mediafire.com/?gcrpzzc0kdoxcjx
MD5 Sum: 51e24c1e5eff11ba5ea481a63f7404eb
Update
I have now uploaded files for B&N Update 1.4.1.
The first file (MD5 Sum: 4ff1d9764663278c3f51e2e2c9d841a6) is meant to update a pre 1.4.1 Stock B&N ROM on secondary /system through CWM:
https://rapidshare.com/files/52135913/secondary_update_NC_stock_1_4_1.zip
The second file (MD5 Sum: c1506816fbfb8c419fbbc4afe1b12887) is meant to update a pre 1.4.1 Stock B&N ROM on primary /system through CWM without messing with recovery;
https://rapidshare.com/files/869435270/primary_update_NC_stock_1_4_1_keep_CWM.zip
The third file (MD5 Sum: ab1307c55a2c35c91d339c8037ce9a78) is meant to update a pre 1.4.1 Stock B&N ROM on primary /system through CWM, replacing recovery and all:
https://rapidshare.com/files/2059644016/primary_update_NC_stock_1_4_1.zip
None of these files will wipe user apps and data, so if you wish to do that, boot into recovery and wipe from there. [This will work on primary /data partition only]
Please note: If the B&N Stock ROM is rooted, you will lose root upon updating.
Thanks!
This worked beautifully! I flashed it from my sdcard after booting into CWM on my primary partition on emmc.
I'm betting you got the original from jasoraso in this dual boot thread: http://forum.xda-developers.com/showpost.php?p=17122342&postcount=142
What I would love is a straight CWM-flashable 1.3 ROM, to include in my up-to-date (for now) guide for setting up the dual boot, rather than having to set up and move 1.2, then update to 1.3.
That is possible to do by combining three of the steps. You need commands from the scripts from the prepare dual boot zip to resize /media and create the secondary system and data partitions, then the part of the script from the file that copies the contents of /data from primary to secondary and replaces u-boot.bin , and then my file which formats secondary /system and puts 1.3.0 there, and copies the latest kernel and patched ramdisk onto /boot. I can put such a file together, but I wouldn't be able to test it. The Nook belongs to my wife, and and you get the rest of the drift.
PS - You can use my file as is after running prepare dual boot and copy stock to secondary. It is not necessary to update secondary to 1.2 before going to 1.3.
Sent from my SAMSUNG-SGH-I897 using XDA App
rajendra82 said:
That is possible to do by combining three of the steps. You need commands from the scripts from the prepare dual boot zip to resize /media and create the secondary system and data partitions, then the part of the script from the file that copies the contents of /data from primary to secondary and replaces u-boot.bin , and then my file which formats secondary /system and puts 1.3.0 there, and copies the latest kernel and patched ramdisk onto /boot. I can put such a file together, but I wouldn't be able to test it. The Nook belongs to my wife, and and you get the rest of the drift.
Click to expand...
Click to collapse
Wait...what? What I'm talking about is a 1.3 zip made to work with CWM and in no way doctored to account for dual booting, just like the 1.2 zip one would otherwise use.
rajendra82 said:
PS - You can use my file as is after running prepare dual boot and copy stock to secondary. It is not necessary to update secondary to 1.2 before going to 1.3.
Click to expand...
Click to collapse
Have you tested this theory? I found that when I did not register my B&N install while it was on the primary partition, I was unable to boot into it on the secondary partition.
Taosaur said:
Wait...what? What I'm talking about is a 1.3 zip made to work with CWM and in no way doctored to account for dual booting, just like the 1.2 zip one would otherwise use.
Click to expand...
Click to collapse
Are you talking about updating an already rooted 1.0/1.1/1.2 Nook Color. I am sure the scripting to do that is exactly the same as what is in the 1.2 zip file. Just replace the 1.2 files inside the zip with the equivalent files from the 1.3 update. Make sure the portions which install su and busybox are included, and build.prop spoofig is applied. I am not sure it is worth it building such a zip file though. One is better off just applying the B&N update, and then rerooting with manual nooter. What I created was for people that have already doctored the setup for dual booting. In such a case, the B&N update would either fail, or would replace the primary partition instead.
Taosaur said:
Have you tested this theory? I found that when I did not register my B&N install while it was on the primary partition, I was unable to boot into it on the secondary partition.
Click to expand...
Click to collapse
No way to get around having to register the primary partition image first. Once that is done it could be moved to secondary and then updated straight to 1.3 instead of going 1.2 first.
I have a dual boot eMMC NC. I am not sure which setup I use but the last time I updated the CM7 nightly, I lost the dual boot until I installed the u-Boot again. I suspect I have the setup that looks for altFImg. So this is not going to work for me. I have 1.2 rooted which I use only occasionally. I am not even sure what is in 1.3 but I am curious.
yelloguy said:
I have a dual boot eMMC NC. I am not sure which setup I use but the last time I updated the CM7 nightly, I lost the dual boot until I installed the u-Boot again. I suspect I have the setup that looks for altFImg. So this is not going to work for me. I have 1.2 rooted which I use only occasionally. I am not even sure what is in 1.3 but I am curious.
Click to expand...
Click to collapse
All you need to do is boot into CM7, mount /boot as root, and then rename uFImg to uAltImg, uFRam to uAltRam, and then change the text inside u-boot.altimg and u-boot.altram to point to the new names instead of the old ones. This will keep you dual booting under the old u-boot.bin, and even after a new protocol u-boot.bin (like that installed by CM7) gets pushed to your Nook Color. Once you have done that, you can update the secondary to 1.3 using my zip file if you want.
rajendra82 said:
Are you talking about updating an already rooted 1.0/1.1/1.2 Nook Color. I am sure the scripting to do that is exactly the same as what is in the 1.2 zip file. Just replace the 1.2 files inside the zip with the equivalent files from the 1.3 update. Make sure the portions which install su and busybox are included, and build.prop spoofig is applied. I am not sure it is worth it building such a zip file though. One is better off just applying the B&N update, and then rerooting with manual nooter. What I created was for people that have already doctored the setup for dual booting. In such a case, the B&N update would either fail, or would replace the primary partition instead.
Click to expand...
Click to collapse
I wouldn't know what to change and what to leave alone, myself, but I think you're making this more complicated than it needs to be. I'm talking about installing 1.3 using CWM, regardless of how the device is partitioned or what was on the primary partition previously. Like the files in this thread, but 1.3: http://forum.xda-developers.com/showthread.php?t=1050520.
I understand that you were just cleaning up jaso's update-dualboot-to-1.3 file. I used the original and it worked fine, but it would have saved me a couple steps (and would be more useful in a guide for setting up dualboot) to simply install 1.3 rather than 1.2 to the primary partition when setting up. The reason I started with 1.2 is because it is the most current stock ROM available for CWM. What I would like is to avoid a historical re-enactment of stock OS development altogether. A general-purpose, CWM-flashable 1.3 ROM would be broadly useful, but is so far lacking as far as I've seen.
1. Do you envision this to be an uprooted stock 1.3 update ROM (either as primary or the only boot option) ? I just don't see the need for this to be CWM flashable. It is very easy to get there by resetting the device to stock, and then updating the device to 1.3.0 using the B&N file, and restoring dual boot as need be. If one has any older stock ROM running on primary, the B&N update will get them to 1.3 while losing root. There is no need to apply 1.2 update first.
2. Do you envision this to be for already rooted single or primary booting 1.1/1.2 users? There is once again no need to create any file for this. One can simply apply the B&N update, and then rerun manual nooter, and restore dual booting to the secondary.
3. The only users with no clear upgrade path are those who have already moved the B&N ROM to secondary. That's why I fixed up the zip file, and shared it. I am glad the original file worked for you despite the script errors. I can see other setups where it would have failed though.
I am not trying to make this more complicated than it needs to be. The Nook Color is just capable of being set up in so many ways, there isn't simply going to be a single update method that will work in all scenarios.
Sent from my SAMSUNG-SGH-I897 using XDA App
I'm envisioning it as a one step, starting-point-agnostic means of establishing a 1.3 stock install, whether for setting up a dualboot or for any other purpose. Its usefulness is made evident by the three-page thread devoted to CWM-flashable 1.2 images: http://forum.xda-developers.com/showthread.php?t=1050520
Taosaur said:
I'm envisioning it as a one step, starting-point-agnostic means of establishing a 1.3 stock install, whether for setting up a dualboot or for any other purpose. Its usefulness is made evident by the three-page thread devoted to CWM-flashable 1.2 images: http://forum.xda-developers.com/showthread.php?t=1050520
Click to expand...
Click to collapse
Then the best bet is two step process:
1. Wipe device and restore to factory stock.
2. Download B&N 1.3 update file from website and place it on the root of SD card. Let the device recognize it, and apply it.
Once the 1.3 update gets applied, you are free to reroot, install CWM, set up dual booting, or whatever the next step may be.
It is the only method that will work in all circumstance as it involves starting from scratch regardless of setup. If want to preserve any of your current setup, no one step file will work for all circumstances. Some people have the stock firmware rooted, others do not. Some have the stock as the only internal boot, others have it as primary option of a dual booting configuration, while others have it as a secondary option. Some have stock recovery and run CWM off the sdcard when needed and want to update their recovery to the latest stock version, others want to keep the CWM recovery, and not update the recovery. There simply is no way file to cope with all these options.
rajendra82 said:
All you need to do is boot into CM7, mount /boot as root, and then rename uFImg to uAltImg, uFRam to uAltRam, and then change the text inside u-boot.altimg and u-boot.altram to point to the new names instead of the old ones. This will keep you dual booting under the old u-boot.bin, and even after a new protocol u-boot.bin (like that installed by CM7) gets pushed to your Nook Color. Once you have done that, you can update the secondary to 1.3 using my zip file if you want.
Click to expand...
Click to collapse
You lost me at mount
Seriously, I am trying to see if what I have is compatible with your update before I apply the update. I have a couple of useful apps on my CM7 and I have lost the password. I don't want to be stuck without CM7 or start over again. I can live without the 1.3 update though. So I want to make sure I am up to the task of finding and renaming these files if I have to.
With that said, how do I mount the /boot partition? I go into terminal emulator and give the su command. Then I tried mount /boot but that didn't work.
Thanks for your help.
rajendra82 said:
1. Wipe device and restore to factory stock.
Click to expand...
Click to collapse
...the only means of doing so "that will work in all circumstance" and in any way resembles a single step is flashing a stock zip via CWM. Why not use an up-to-date zip? The usefulness of such files is demonstrated by the fact that:
such files exist for past stock versions
those files are in use
files like yours are used to work around the non-existence of up-to-date stock zips
If you're so comfortable working with update files, you very likely could have produced such a file in less time than you've spent rationalizing away the clearly demonstrated need for them. Tell you what, in all likelihood I can just swap a few files from B&N's 1.3 zip into the existing CWM-flashable 1.2 zips, correct? Which files do I replace?
Anyone?
---------- Post added at 02:15 PM ---------- Previous post was at 01:58 PM ----------
yelloguy said:
You lost me at mount
Seriously, I am trying to see if what I have is compatible with your update before I apply the update. I have a couple of useful apps on my CM7 and I have lost the password. I don't want to be stuck without CM7 or start over again. I can live without the 1.3 update though. So I want to make sure I am up to the task of finding and renaming these files if I have to.
With that said, how do I mount the /boot partition? I go into terminal emulator and give the su command. Then I tried mount /boot but that didn't work.
Thanks for your help.
Click to expand...
Click to collapse
I don't know for sure, but wouldn't rajendra's update create properly-named boot files alongside the old, improperly named ones? Wouldn't the multiboot built in to recent CM7 builds then look for and boot from the more recent, properly named files? I can't confirm that's how it would work, but it's what I would expect.
Taosaur said:
I don't know for sure, but wouldn't rajendra's update create properly-named boot files alongside the old, improperly named ones? Wouldn't the multiboot built in to recent CM7 builds then look for and boot from the more recent, properly named files? I can't confirm that's how it would work, but it's what I would expect.
Click to expand...
Click to collapse
Yes they would create properly named boot files. But I suspect my nook looks for improperly named files since I updated my u-boot after the CM7 nightly update.
The fix is simple: to rename the files. But I need to know how before I take the plunge.
yelloguy said:
Yes they would create properly named boot files. But I suspect my nook looks for improperly named files since I updated my u-boot after the CM7 nightly update.
Click to expand...
Click to collapse
Right, but if you run a CM7 update, it would replace your uboot again. I'm not saying do it, just wondering out loud if it would work.
yelloguy said:
Yes they would create properly named boot files. But I suspect my nook looks for improperly named files since I updated my u-boot after the CM7 nightly update.
The fix is simple: to rename the files. But I need to know how before I take the plunge.
Click to expand...
Click to collapse
In order to rename the files, you can do the following:
1. Boot into CM7 (or any other place where you have command line root access)
2. Create a temporary directory at a location where you have read write access.
3. Type su in a terminal session to gain root access and then mount mmcblk0p1 at the temporary location you created using the command:
mount /dev/block/mmcblk0p1 <full path to the directory you created>
4. Now use Astro to go over to the directory you created and mounted mmcblk0p1 into. You should see:
u-boot.bin which is the bootloader
u-boot.bin.stock which is the backup of the old stock bootloader
uImage and uRamdisk which are your primary kernel and ramdisk
uFImg and uFRam which are your secondary kernel and ramdisk (and whose names are mismatching the CM7 bootloader protocol)
u-boot.altimg and u-boot.altram, which are text files per the old bootloader method containing names of uFImg and uFRam
5. Rename uFImg to uAltImg, uFRam to uAltRam. And edit the contents of u-boot.altimg and u-boot.altram to match the new file names.
6. Reboot as usual into primary or secondary.
Now if an CM7 update ever replaces your u-boot.bin, you will not lose dual boot, as you have it set up as uAltImg and uAltRam per the new protocol.
Sent from my SAMSUNG-SGH-I897 using XDA App
---------- Post added at 03:24 PM ---------- Previous post was at 03:06 PM ----------
Taosaur said:
...the only means of doing so "that will work in all circumstance" and in any way resembles a single step is flashing a stock zip via CWM. Why not use an up-to-date zip? The usefulness of such files is demonstrated by the fact that:
such files exist for past stock versions
those files are in use
files like yours are used to work around the non-existence of up-to-date stock zips
If you're so comfortable working with update files, you very likely could have produced such a file in less time than you've spent rationalizing away the clearly demonstrated need for them. Tell you what, in all likelihood I can just swap a few files from B&N's 1.3 zip into the existing CWM-flashable 1.2 zips, correct? Which files do I replace?
Anyone?
Click to expand...
Click to collapse
I am sorry if you think I am rationalizing, but that was not my intention. I just wanted to point out that the files you linked to do not meet your own criteria.
Take for example the file update-nc-stock-1.2-keepcwm-signed.zip that you point to as missing in an up to date 1.3 version. That file will update a Nook Color to 1.2, but will keep CWM recovery. It however will make someone whose Nook Color 1.1 was rooted using autonooter lose root. A person that has been dualbooting to CM7 on secondary will lose that ability as well after applying that update. So unlike what you think, this is not a file to update stock 1.2 update under all circumstances regardless of what the starting point is. It has a specific use (update fro, a pre 1.2 stock primary eMMC boot, no dualboot, CWM recovery installed). Creation of an all situation stock restore file is impossible IMO, and the best you can do is wipe and apply 1.3 B&N stock update. You or I could technically create another equivalent file with update-nc-stock-1.3-keepcwm.zip /system files, kernel, ramdisk, etc., but this file would be subject to the same side effects as the original.
---------- Post added at 03:30 PM ---------- Previous post was at 03:24 PM ----------
Taosaur said:
Right, but if you run a CM7 update, it would replace your uboot again. I'm not saying do it, just wondering out loud if it would work.
Click to expand...
Click to collapse
It would work. If you apply my zip, there will be a uAltImg and uAltRam in /boot (in addition to uFImg and uFRam). If you apply another update that pushes the CM7 bootloader, it will then look for these files with trying to do an alternate boot, and would boot into a unrooted stock 1.3.
rajendra82 said:
In order to rename the files, you can do the following:
1. Boot into CM7 (or any other place where you have command line root access)
2. Create a temporary directory at a location where you have read write access.
3. Type su in a terminal session to gain root access and then mount mmcblk0 at the temporary location you created using the command:
mount /dev/block/mmcblk0 <full path to the directory you created>
Click to expand...
Click to collapse
I get an error:
mounting <paths> failed: Device or resource busy
Any ideas?
yelloguy said:
I get an error:
mounting <paths> failed: Device or resource busy
Any ideas?
Click to expand...
Click to collapse
I see a typo in my command (stupid Swiftkey X). It should be:
mount /dev/block/mmcblk0p1 <some directory>
Also try typing just mount in terminal to see if /dev/block/mmcblk0p1 is already mounted somewhere else.
rajendra82 said:
Take for example the file update-nc-stock-1.2-keepcwm-signed.zip that you point to as missing in an up to date 1.3 version. That file will update a Nook Color to 1.2, but will keep CWM recovery. It however will make someone whose Nook Color 1.1 was rooted using autonooter will lose root. A person that has been dualbooting to CM7 on secondary will lose that ability as well after applying that update. So unlike what you think, this is not a file to update stock 1.2 update under all circumstances regardless of what the starting point is. It has a specific use (update fro, a pre 1.2 stock primary eMMC boot, no dualboot, CWM recovery installed). Creation of an all situation stock restore file is impossible, and the best you can do is wipe and apply 1.3 B&N stock update. You or I could technically create another equivalent file with update-nc-stock-1.3-keepcwm.zip /system files, kernel, ramdisk, etc., but this file would be subject to the same side effects as the original.
Click to expand...
Click to collapse
Riiiiight... it would install stock 1.3 to the device. That's the intended behavior. The point is to avoid the unnecessary step of updating in any process that includes flashing stock to the sole or primary partition. One example of such a process would be a fresh dual boot setup. That it does not update or otherwise rely upon an existing install is the point.
Granted, such a file would not repartition the device, but it would install up-to-date stock in one step regardless of how a device is partitioned (1/5, 2/5, 5/1 or dual boot).
Dear Admins,
Could we get a forum setup for the Cube U27GT WiFi version? I dug around on the site a bit beforehand but didn't see one, I apologize if I missed it and please direct me there if I did.
I have this tablet and I am doing some initial basic firmware development for it and want a proper place to start putting threads.
Dear Dev Community,
I can't root this bloody thing... At least, not the rom itself. Let me explain...
I can flash the stock rom from Cube and that can be rooted using Kango Root. --Fine...
However, I can't figure out how to replicate this when I make my own rom.
Thus far, here is what I have attempted...
1. Setup dsixda's excellent kitchen on my Ubuntu workstation.
2. Unpack the rom, clean things up, manually put the boot image into the dsixda unpacked working rom folder, run dsixda's root functionality (which add SU binary to xbin and SuperSu apk file to app folder as well as do some things with the boot image file).
3. Rather than using repack with Dsixda (which makes an update.zip image which I can't use because the stock recovery environment on this device can't flash zip update files and I can't for the life of me figure out how to get and or make a working CWM or TWRP recovery image for this unit)...
4. What I do is I run commands in linux to unpack the stock rom to another directory and mount that directory, then clear out a bunch of folders and then manually copy in my files from dsixda's working folder, then repackage up my unpacked stock rom into a new system.img file.
5. Then copy my now modified boot image, system image, and also userdata image (I modify that as well as that is where most all of the chinese bloatware is loaded from) to my SP_Flash_Tool, generate new checksum.ini file and flash normally...
What I get as a result...
1. As long as I am really careful with how I copy files into my new image, the new system flashes okay (if I am not careful, after flash USB storage for some reason has a format error and the system will boot but can't mount USB storage and other odd issues ensue as a result).
2. Assuming everything flashes okay, and no issue with USB storage partition, I have SuperSU installed and when I go to use an app (ES File Explorer or Root Checker) that require's root, I do get the prompt. However none of the root functions actually work and Root Checker tells me I am not rooted.
That is as far as I have got. So as a result, I have a really nice, westernized, cleaned up rom but with no root.
Anyone have any ideas?
This is my first adventure into mod'ing MTK roms so I am sure I am doing all kinds of things wrong . I had a good bit of experience on Rockchip SoC's before this though.
Kind regards and thanks in advance!
Roman
Figured it out!
So I finally did the following rather hackish work-around...
1. Flash stock firmware...
2. Root with Kingo Root
3. Enabled ADB
4. Attach to PC and fire up MTK Droid Tools
5. Take a full backup
6. Modify the system image from the backup and make changes
7. Put that in new firmware flash package
8. Flash new firmware
YAY - Cleaned up rom, modified, with root!
Once I get it all packaged up and uploaded to mtkfirmware.com I will post a link for anyone that wants a cleaned up rom with root!
The only downfall of the above method is that it absolutely requires that the developer have a device on hand because you can't just root the stock image file (at least, I couldn't figure out how... - bleh...
Kind Regards,
Roman
Dear roman,
Thanks for your hard work.
I have a simple question (I think) and if you have the time to reply or -any other android guru- I would be thankful.
My later issue was with a U27GT cube tablet, but I have others, one for each kid, and this is more of general question.
I am reading this and other forums about how to flash tablets from PC. My question is:
Can the flashing process be done from a SD card?
Thanks a lot and regards,
Fernando
SKorea
Quick scenario: I am working on a Nook Simple Touch UK ROM zip (now obsolete), trying to get from it the essentials that make it "UK" and move them into/replace similar files (mostly images and documents, but maybe one or two system apps) to the current US version of the ROM so that everything will function properly, but the ROM will have the look and feel (and localization options) of the obsolete UK ROM. There's not a lot to change.
The zips don't open for inspection properly in anything I've tried except 7zip. I can move/overwrite files from one ROM to the other, but there does seem to be a slight compression going on and I have no idea how to stop this. In WinRAR I could, but I don't see any similar option in 7zip. Then the zip contents go into a CWM flashable zip.
Preparing the CWM zip with no changes to the current US ROM gives an error-free flash and a functioning result. But if I change even one file (like the boot splash screen--same name, same file size--until moved), the flash fails almost immediately.
I asked someone about internal checksums before ROMs would install but they did not think there were any on these ROMs. Now I wonder. I don't see anything that looks like a checksum or even a "to do" list.
Have I missed some fundamental step or am I using my tools incorrectly (or the wrong tools)? One last thought, these are "update" zips, if that makes any difference, so on their own they would not wipe user data,for example.
Edit: I think I've got it!
1. Unzip (not just "open") both zips with WinRAR (7zip would not extract the update zips for me)
2. Drag alternate versions of files from one folder to the other
3. Zip up with 7zip
4. Open CWM update zip (just has META-INF folder) and ROM update zip with 7zip
5. Drag contents of ROM update zip to CWM zip.
6. Copy new CWM zip to CWM card and flash.
7. SMILE!
nmyshkin said:
Quick scenario: I am working on a Nook Simple Touch UK ROM zip (now obsolete), trying to get from it the essentials that make it "UK" and move them into/replace similar files (mostly images and documents, but maybe one or two system apps) to the current US version of the ROM so that everything will function properly, but the ROM will have the look and feel (and localization options) of the obsolete UK ROM. There's not a lot to change.
The zips don't open for inspection properly in anything I've tried except 7zip. I can move/overwrite files from one ROM to the other, but there does seem to be a slight compression going on and I have no idea how to stop this. In WinRAR I could, but I don't see any similar option in 7zip. Then the zip contents go into a CWM flashable zip.
Preparing the CWM zip with no changes to the current US ROM gives an error-free flash and a functioning result. But if I change even one file (like the boot splash screen--same name, same file size--until moved), the flash fails almost immediately.
I asked someone about internal checksums before ROMs would install but they did not think there were any on these ROMs. Now I wonder. I don't see anything that looks like a checksum or even a "to do" list.
Have I missed some fundamental step or am I using my tools incorrectly (or the wrong tools)? One last thought, these are "update" zips, if that makes any difference, so on their own they would not wipe user data,for example.
Edit: I think I've got it!
1. Unzip (not just "open") both zips with WinRAR (7zip would not extract the update zips for me)
2. Drag alternate versions of files from one folder to the other
3. Zip up with 7zip
4. Open CWM update zip (just has META-INF folder) and ROM update zip with 7zip
5. Drag contents of ROM update zip to CWM zip.
6. Copy new CWM zip to CWM card and flash.
7. SMILE!
Click to expand...
Click to collapse
Nice job!