http://cgi.ebay.com/ws/eBayISAPI.dl...38080&ssPageName=STRK:MEWNX:IT#ht_3651wt_1260
Found this car mount for the G1. As opposed to the universal ones which are significantly bulkier and honestly dont look that good. This one is sleek and will let you open the G1 to keyboard mode without undocking he phone.
I've ordered it. I'll let you know in a few weeks
Any updated?
This thing looks great and cheap!
Nope. Thats the downfall with getting things from HK off Ebay. Takes forever.
I will post a review maybe take some pictures. I really hope it lets me open the screen and use it full out.
this is what i got :
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=110438371574
ordered it on 29th Nov, still no sign, tracking says : Shipped
Thats the downfall with getting things from HK off Ebay. Takes forever.
Click to expand...
Click to collapse
True!!
Both of those are a custom fit for the G1, but notice the design of them. You can't use the car charger while the phone is in the mount. The 'clip' is covering the charger port.
This one is designed to allow you to charge the G1 while it is in the mount:
http://www.g1depot.com/igrip-custom-fit-flexible-mount/3A78A5815.htm
mrhousto
__________________
Phone: T-mobile Black G1, Rooted
SPL: 1.33.2005
Radio: 2.22.19.26I
Recovery: Amon_RA's 1.5.0, w/switchrom
ROM:
1. Motorola Blur v1.1
2. Cyanogen 4.2.9.1
3. JesterBlur v1.2.5
4. MghtyMax 1.9.1
5. KiNgxKxKlair Eclair Hero Version 0.6
Card: 4GB class 6
mrhousto said:
Both of those are a custom fit for the G1, but notice the design of them. You can't use the car charger while the phone is in the mount. The 'clip' is covering the charger port.
This one is designed to allow you to charge the G1 while it is in the mount:
http://www.g1depot.com/igrip-custom-fit-flexible-mount/3A78A5815.htm
mrhousto
__________________
Phone: T-mobile Black G1, Rooted
SPL: 1.33.2005
Radio: 2.22.19.26I
Recovery: Amon_RA's 1.5.0, w/switchrom
ROM:
1. Motorola Blur v1.1
2. Cyanogen 4.2.9.1
3. JesterBlur v1.2.5
4. MghtyMax 1.9.1
5. KiNgxKxKlair Eclair Hero Version 0.6
Card: 4GB class 6
Click to expand...
Click to collapse
Do you own this? I assume you can open the G1 while its in the holder? And is it sturdy/work well? Held in place alright and whatnot?
tehseano said:
Do you own this? I assume you can open the G1 while its in the holder? And is it sturdy/work well? Held in place alright and whatnot?
Click to expand...
Click to collapse
I don't own one 'yet' because the site says it will be available around 12/30. Looking at the pic, it doesn't seem to interfere with the operation of the phone... meaning you can still slide it open as well as charge it.
I've decided to make a 'temporary' dock for my G1 until the one above is available. I used the back portion of a clear cover that I had laying around. I figured I would put it to some use since I had it!
Here are a few pics:
I got this one to use in my car and love it! Charger fits in and it can be rotated in any direction. Plus you can move it from car to car without messy window rings. http://www.amazon.com/gp/product/B001UGMTKC/ref=oss_T15_product
mrhousto said:
I've decided to make a 'temporary' dock for my G1 until the one above is available. I used the back portion of a clear cover that I had laying around. I figured I would put it to some use since I had it!
Here are a few pics:
Click to expand...
Click to collapse
That was a great idea. I got the cheap one off ebay and the cover does block the charge port. I am going to do a little dremel tooling on it to see if I can make it better. If not I will buy a couple of the cheap cases off ebay and try your mod.
The Ebay one also completely blocks the speaker. I will cut a hole for that too.
billquinn1 said:
That was a great idea. I got the cheap one off ebay and the cover does block the charge port. I am going to do a little dremel tooling on it to see if I can make it better. If not I will buy a couple of the cheap cases off ebay and try your mod.
The Ebay one also completely blocks the speaker. I will cut a hole for that too.
Click to expand...
Click to collapse
You can never go wrong with a dremel tool!! I didn't know that those ebay holders cover up the speaker too. It kinda makes the phone useless while its in there. I got the idea for the one I made off the proclip website. Rather than spending $30 bucks for theirs, I just made my own! I popped the trim off from around the heater/radio and used 3M double sided tape to secure the metal bracket that I bent to shape. Then used another piece of 3M to secure the back portion of the clear cover to the bracket. Of course, I put the 'Dual' sticker on there just for kicks!!!
I got myself a ProClip G1 mount.
http://www.proclipusa.com/brodit-de...h-cable-with-3-in-1-adapter-849868-17354.aspx
It is a little pricey but the build quality is great and has a swivel mount. And yes you can open the screen and access the keyboard while mounted. Only downside (besides the price) is that you have to remove the rubber dust cover from the mini-USB charging port on the G1/Dream. I was kind of ticked off when I found this out after ordering it but I have been without it for quite a while now and haven't had any problems. I usually carry this G1 in my pocket and sometimes on my holster (when my work G1 isn't on me).
tekkitan said:
I got myself a ProClip G1 mount.
http://www.proclipusa.com/brodit-de...h-cable-with-3-in-1-adapter-849868-17354.aspx
It is a little pricey but the build quality is great and has a swivel mount. And yes you can open the screen and access the keyboard while mounted. Only downside (besides the price) is that you have to remove the rubber dust cover from the mini-USB charging port on the G1/Dream. I was kind of ticked off when I found this out after ordering it but I have been without it for quite a while now and haven't had any problems. I usually carry this G1 in my pocket and sometimes on my holster (when my work G1 isn't on me).
Click to expand...
Click to collapse
A little pricey..... I guess!
hi all, i got myself one of these and it comes with a car charger. though i found the cord was not long enough from my cigarette lighter to windscreen.
http://www.amazon.co.uk/Dedicated-W...3?ie=UTF8&s=electronics&qid=1262888830&sr=8-3
mrhousto said:
Both of those are a custom fit for the G1, but notice the design of them. You can't use the car charger while the phone is in the mount. The 'clip' is covering the charger port.
This one is designed to allow you to charge the G1 while it is in the mount:
**Unable to post link due to my restrictions I guess. See mrhousto's original post**
mrhousto
Click to expand...
Click to collapse
So I didn't see anyone comment on this yet. But I went ahead and bought this due to the decent price and what appeared to be the ability to open it while mounted.
So the answer is definitely "yes" to everything I wanted from it.
Yes, it does allow you to open the screen while mounted.
Yes, the clip does hold the phone very well and it is pretty easy to put and remove the phone with one hand.
Yes, you can plug in a charger while mounted and you don't have to remove the little charger door to use it.
Yes, there is a hole in the back so the speaker/camera is exposed so I guess you could record video, or take pictures while driving if that is something you wanted to do. Also, the microphone on the bottom is not blocked in case you want to just use speakerphone while mounted.
Yes, it feels very solid and well made. It says it "Made in Germany" on all of the parts which makes me feel good. "The German's make good stuff!"
Yes, The body clip itself does come off the arm so you could in theory use this for a different phone assuming you can get just the body clip online.
No, you cannot use this with anything other then a regular sized battery/door. (hopefully this was obvious)
Overall, for $20-$25 (depending on shipping), this is an awesome mount for your G1. I haven't actually tried mounting it on my window yet but the big suction cup (~3 inches wide) with the pull lever thing look like they will work great.
Boogy
Ather said:
this is what i got :
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=110438371574
ordered it on 29th Nov, still no sign, tracking says : Shipped
True!!
Click to expand...
Click to collapse
I order this one and finally got it.
It doesn't seem to fit in the way the picture is. The picture shows the "big" tab at the bottom. The problem with this is that it covers the hole for the charger. Also for me it doesn't quite fit so the top tab doesn't clip on to anything and doesn't hold the phone.
If I put it in upside down then the small tab doesn't cover the hole for the charger and it seems to fit nice an snug. But when it is in upside down you can no longer slide it open as the bigger tab is clipped onto the front. That is no big deal for me any ways as I don't plan on opening it while it is in the holder in the car.
the perfect mount/ who needs a navigation system
I also went to g1depo.com and got the windshield mount, it arrived four days early and yes to all the major questions. Opening capability, charger connection, speakerphone/camera hole, and it is also sturdy and well made "German" to be exact. and only 25.00 with shipping. Winner!!!!!!!!!!!!!
zodagreat said:
I also went to g1depo.com and got the windshield mount, it arrived four days early and yes to all the major questions. Opening capability, charger connection, speakerphone/camera hole, and it is also sturdy and well made "German" to be exact. and only 25.00 with shipping. Winner!!!!!!!!!!!!!
Click to expand...
Click to collapse
I hate to burst your bubble but.....
http://www.shop4tech.com/item8622.html
$6 shipped and it fits the G1 perfectly (yes I actually have one). It's a universal design so it's plenty adjustable. Even if it's not as pretty as some it does the job for a fraction of the price.
benmyers2941 said:
I hate to burst your bubble but.....
http://www.shop4tech.com/item8622.html
$6 shipped and it fits the G1 perfectly (yes I actually have one). It's a universal design so it's plenty adjustable. Even if it's not as pretty as some it does the job for a fraction of the price.
Click to expand...
Click to collapse
thats nice and everything, wonderful price...but uuhh...its intended purpose are for navigation devices, although it may have no problem holding, I don't think it would allow all of the g1 usage in dock such as rotating landscape/portrait, opening/closing keyboard, charging with dual 3.5 headset jack/usb extention.
Are there any good carmounts that fit a g1 with the extended battery back cover?
I held off getting a car dock for my Captivate since i knew i was getting a new car (mounting would have been much different). now that things are settled with the SGS2, i finally got around to ordering my dock...
http://www.proclipusa.com/brodit-de...d-cigarette-lighter-adapter-512255-18750.aspx
great options from ProClip USA, but since my car's cig lighter is behind my right arm (07 S2000) the only option i had was to get the hard wired one (http://www.proclipusa.com/brodit-de...cord-for-fixed-installation-513255-18750.aspx). when i get this installed and wired up, i'll post pics. i'm going to love the set up, now i'll just need to buy a new BT (A2DP) enabled HU so i can eliminate all visible wires from my cabin...
pics to follow
this car dock is amazing... i just installed it and hard-wired it into my cigarette lighter for power, and it works perfectly. the phone fits in nice and snug, yet pulls out easily (but not too easily that it would ever just fly out on its own).
does the dock accept the phone with a case on .. or is it a pretty snug fit?
buy the adjustable one. have had mine for my last 3 smartphones.
http://www.proclipusa.com/brodit-device-holder/samsung-galaxy-s-ii-(at&t)/adjustable-holder-with-tilt-swivel-875214-18750.aspx
Coreym said:
does the dock accept the phone with a case on .. or is it a pretty snug fit?
Click to expand...
Click to collapse
not at all... it fits as snug as you can get...
pinoyxpryde said:
buy the adjustable one. have had mine for my last 3 smartphones.
http://www.proclipusa.com/brodit-device-holder/samsung-galaxy-s-ii-(at&t)/adjustable-holder-with-tilt-swivel-875214-18750.aspx
Click to expand...
Click to collapse
what he said...
The adjustable one fits great with a thin skin on the GS2. I"m also on my third phone with the same cradle
If you have multiple vehicles, or phones also consider the proclip quick release system.
[I'm new so no links for me. go to proclipusa & search for "move clip"]
makes daily mix & match a 10 second operation.
pinoyxpryde said:
buy the adjustable one. have had mine for my last 3 smartphones.
[
Click to expand...
Click to collapse
Lucke said:
this car dock is amazing... i just installed it and hard-wired it into my cigarette lighter for power, and it works perfectly. the phone fits in nice and snug, yet pulls out easily (but not too easily that it would ever just fly out on its own).
Click to expand...
Click to collapse
Do you keep the phone on it's side like that? Do you have issues during a turn? The website mentions issues with cell/gps signals with the phone horizontal. Do you see that? Are the 'arms' that hold the phone made of metal or plastic?
Same questions to the guy above who said he had the adjustable version. I was thinking, I'd like to do a micro-usb charging/AUX analog audio output cable (instructions are on this forum). I'd like to keep my case though. And this looks like the perfect solution. I might have to fab something up to put the phone on my dash above the stereo (for optimum viewing/GPS angle). Any thoughts on that idea? Thanks!
Jim
CNLiberal said:
Do you keep the phone on it's side like that? Do you have issues during a turn? The website mentions issues with cell/gps signals with the phone horizontal. Do you see that? Are the 'arms' that hold the phone made of metal or plastic?
Same questions to the guy above who said he had the adjustable version. I was thinking, I'd like to do a micro-usb charging/AUX analog audio output cable (instructions are on this forum). I'd like to keep my case though. And this looks like the perfect solution. I might have to fab something up to put the phone on my dash above the stereo (for optimum viewing/GPS angle). Any thoughts on that idea? Thanks!
Jim
Click to expand...
Click to collapse
no problems with GPS while the phone is is landscape mode. no issues while turning either as the phone fits very snugly in there. the sides that hold the phone in are thick plastic and have "channels" for where the phone slides in.
Fellow asteemed geeks,
How snug a fit is the Standard cradle? Will a silicone cover work with one without having to remove it?
If folks do not believe it will work, I'll skip the purchase of the cradle. I want a cover that just stays on 24*7.
regards
BEF
bluntyeyedfool said:
Fellow asteemed geeks,
How snug a fit is the Standard cradle? Will a silicone cover work with one without having to remove it?
If folks do not believe it will work, I'll skip the purchase of the cradle. I want a cover that just stays on 24*7.
regards
BEF
Click to expand...
Click to collapse
Not unless the cover is "wafer-thin" in my experience.
There is an insert that is removable in each of the docks, but it doesn't give you enough room with most covers.
Sorry. I wish they had planned better ... say multiple inserts of differing thicknesses.
You can remove the standard dock insert which will give you room to dock the phone with a case. With the Body Glove Mirage (soft) and Incipio Feather, I can dock the phone without that top plate installed. Downside is that it looks tacky and looks to put a lot of stress on the charging port on the phone since the top plate supports the weight of the phone.
I ended up getting the 'Ruggedized Battery Cover plate' from Motorola. There is a thread around here that details how you can get Motorola to send you one for free, although with the Atrix going EOL, it might not still be available. With this adapter plate you can dock the phone with pretty much any case that is not overly bulky (ie OtterBox Defender). Try searching for the thread on the 'Ruggedized battery cover' to find the exact instructions and part numbers you need.
I recently got the Nillkin hard cover case which is extremely thin. Unfortunately, even with this case, it does not work with my ebay charging dock. Links to both products:
Case:
http://www.amazon.com/gp/product/B00EEAVJ1Q/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
Charging dock:
http://www.ebay.com/itm/221302293102?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
With the largest "attachment" to the dock - 9.5mm, the case will go in and even clip magnetically, but will not charge. If I remove the attachment (ultra wide), it will not stay in, but does charge.
If anyone knows a solution or has a charging dock that will work with this sized case, please post a link!
Well what you can do it tear up the case and the cable out, you will not get the dock functionality but you wont have to remove the cover or open the flap everytime.
If you are creative enough, make your own dock and install the cable (from original dock) into it!
Sent from my C6802 using xda app-developers app
Had that case, and the official dock. Problem is the case side's raises the phone up so a tiny bit but enough so that it'll just sit right above the charger but won't properly connect. Modifying the dock or making one seems a lot more hassle than cutting the case, so I went and cut the case's charger slot so that it's wider, and also make a long rectangular cut along the back (about aslong and wide as my pinky finger) so I can slide it into the dock (small adapter, forgot if i tried the big wider one or not, might have made the back cutout unncessary though).
I don't think any of the cases are designed to be used with the dock. All the back-only cases like this all look the same - all designed it to cover up as much as possible. And all the chinese docks look like the official dock. So i don't think there's any dock/case you can buy as a solution... unless there is one since i last check two months ago.
But anyways, to me a dock is more necessary than a case, so 90% of a case is better than no case.
Can anybody recommend a car dock that won't require removal of the Spigen cover?
I saw the Mumbi dock which appears to be alright, but I'm not sure it'd work with the cover.
(http://www.amazon.de/mumbi-Lüftungs...95452&sr=8-4&keywords=xperia+z2+autohalterung)
omernevo said:
Can anybody recommend a car dock that won't require removal of the Spigen cover?
I saw the Mumbi dock which appears to be alright, but I'm not sure it'd work with the cover.
(http://www.amazon.de/mumbi-Lüftungs...95452&sr=8-4&keywords=xperia+z2+autohalterung)
Click to expand...
Click to collapse
The Arkon Intelligrip. Just got it myself after searching endlessly for something that would hold the phone, without pushing buttons or require an awkward position in the mount (i.e. off-center). Finally found this one that holds the phone by the ends rather than the sides! Perfect. I used an Xacto knife and a Dremmel to create an opening in the Spigen Ultra Clear Hybrid case for the magnetic port and then bought some of the cheap aluminum magnetic cables mentioned in an other post on here. So far, it's working great. The mount comes with long and short arms to accommodate everything from a small to extremely large phone. I used one set of short and one set of long arms and the tension seems perfect. Bonus, there is an NFC sticker built in to the mount so I have my phone set to unlock and launch the Sony Car interface when it goes in the mount! (But I would have done that anyway by just sticking an NFC sticker to whatever mount I ended up getting.) It was also cheap! Like $15!!!