i installed new original 2.3.3 rom through cwm 3.1.0 from here
forum.xda-developers.com/showthread.php?t=1141490
but when it install on the startup it just shows notification and the force close
so i m not able to use
Please Help!!
Apparently did not work, go reflash it. Wipe cache, dalvik cache and do a factory reset before flashing again.
mastermind247 said:
i installed new original 2.3.3 rom through cwm 3.1.0 from here
forum.xda-developers.com/showthread.php?t=1141490
but when it install on the startup it just shows notification and the force close
so i m not able to use
Please Help!!
Click to expand...
Click to collapse
read carefully..........and do what in this.........and dnt try to flash gb2.3.3 through cwm ....http://forum.xda-developers.com/showthread.php?t=1141490.........
but there's also given how to flash with cwm.
ok if i flash through the other method then cwm then would i be able to go on recovery process or can change the rom
Related
Hi there, I need your help and advice please.
Here’s my problem. My phone is the SGS2 running KI3 rooted with CF-root KI3 flashed the secure kernel and then flashed the zImage so I still have root CWM and to get rid of the yellow triangle. I have downloaded CM nightly 88 to my laptop and transferred it to my S2 via usb cable into the download folder.
Here’s where the problem comes into play when I run CF’s CWM and choose reboot into recovery I do a wipe/factory reset / wipe cache and update via sdcard, I pick the cm88 from the download folder and it starts to update and then stops. I reboot and it’s stuck on the Samsung S2 page (boot loop). I then have to get into the recovery and restore my phone to the previous state. Can someone help me I would like to try the CM’s custom rom but don’t know what I’m doing wrong? Thanks.
i have the exact same problem!
InFa_ReD_1 said:
Hi there, I need your help and advice please.
Here’s my problem. My phone is the SGS2 running KI3 rooted with CF-root KI3 flashed the secure kernel and then flashed the zImage so I still have root CWM and to get rid of the yellow triangle. I have downloaded CM nightly 88 to my laptop and transferred it to my S2 via usb cable into the download folder.
Here’s where the problem comes into play when I run CF’s CWM and choose reboot into recovery I do a wipe/factory reset / wipe cache and update via sdcard, I pick the cm88 from the download folder and it starts to update and then stops. I reboot and it’s stuck on the Samsung S2 page (boot loop). I then have to get into the recovery and restore my phone to the previous state. Can someone help me I would like to try the CM’s custom rom but don’t know what I’m doing wrong? Thanks.
Click to expand...
Click to collapse
try download it again. Sound like a corrupted package
Sent from my GT-I9100 using Tapatalk
rembrandtlnx said:
try download it again. Sound like a corrupted package
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
I tried and got the samething. I also tried a different cm nightly and got the same results.
InFa_ReD_1 said:
I tried and got the samething. I also tried a different cm nightly and got the same results.
Click to expand...
Click to collapse
me2 only stock roms work for me =(
I think there was an issue with the version of CWM used on the CF-roots since it's been modified by CF and because it's an older version.
After you've rooted with CF, try flashing a kernel on there with a newer version of CWM on there (I used codeworkx's kernel from the Cyanogenmod wiki I've attached below with CWM 4.0.1.4).
Once this kernel is on there, then try flashing the CM7 ROM as per this thread. I prefer flashing from recovery myself, but it's your call.
Make sure you flash it twice in a row if you're having issues.
The problem, as stated above is that cf root kernel installs a modified version of CWM that won't work with CM7. Another thing is you have to flash a stock KH3 because KI3 has the new bootloader (unless you flashed KI3 with the old bootloaders). Then, you have to flash the codeworkx kernel so you get a compatible version of CWM. Once in CWM clear data factory reset + clear cache partition + clear dalvik cache (from advanced).
THIS IS IMPORTANT: Flash the ROM from sd card and when finish do not reboot device, just flash it again without wiping anything in between, just 2 consecutives "install from sd card". When this is done you can reboot the system and then enter again to CWM to flash the google apps .zip file that you can download from the CM7 thread.
Hope this helped. When I flashed CM7 i had exactly the same problem and went back to stock cause it was a pain in the ass to flash it fr the first time. But once you get in CM7, everything becomes great and easy, and you can update the nighlies directly from ROM manager without doing any wiping. You just can't use ROM manager when getting to CM7 for the first time.
InFa_ReD_1 said:
Hi there, I need your help and advice please.
Here’s my problem. My phone is the SGS2 running KI3 rooted with CF-root KI3 flashed the secure kernel and then flashed the zImage so I still have root CWM and to get rid of the yellow triangle. I have downloaded CM nightly 88 to my laptop and transferred it to my S2 via usb cable into the download folder.
Here’s where the problem comes into play when I run CF’s CWM and choose reboot into recovery I do a wipe/factory reset / wipe cache and update via sdcard, I pick the cm88 from the download folder and it starts to update and then stops. I reboot and it’s stuck on the Samsung S2 page (boot loop). I then have to get into the recovery and restore my phone to the previous state. Can someone help me I would like to try the CM’s custom rom but don’t know what I’m doing wrong? Thanks.
Click to expand...
Click to collapse
DO NOT use cf-root to install CM7. It's stated by Codeworkx a lot of times in CM Q&A thread. Just flash his kernel to get cwm.
http://forum.xda-developers.com/showthread.php?t=1118693
Now you have the original cwm recovery (from Koush). Boot into recovery, Wipe data, cache, dalvik.
Install CM7 twice in a row without rebooting.
Then flash gapps (without rebooting) http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip.
Now reboot. Wait for a few mins since system has to build dalvik cache. And you're all good to go
Worried about yellow triangle? Get a usb jig.
Siyah kernel 2.0 supports CM7 and miui. So....have fun.....!!
droidphile said:
DO NOT use cf-root to install CM7. It's stated by Codeworkx a lot of times in CM Q&A thread. Just flash his kernel to get cwm.
http://forum.xda-developers.com/showthread.php?t=1118693
Now you have the original cwm recovery (from Koush). Boot into recovery, Wipe data, cache, dalvik.
Install CM7 twice in a row without rebooting.
Then flash gapps (without rebooting) http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip.
Now reboot. Wait for a few mins since system has to build dalvik cache. And you're all good to go
Worried about yellow triangle? Get a usb jig.
Siyah kernel 2.0 supports CM7 and miui. So....have fun.....!!
Click to expand...
Click to collapse
Thanks. Can i flash the orginal CWM over top the CF CWM?
InFa_ReD_1 said:
Thanks. Can i flash the orginal CWM over top the CF CWM?
Click to expand...
Click to collapse
I did it and didn't have any problems, just follow the steps as I posted above.
tomascunill said:
I did it and didn't have any problems, just follow the steps as I posted above.
Click to expand...
Click to collapse
Great thanks for the help it worked I'm now running CM7. One thing though I can make calls but have lost my network connection. Can someone help me with this? Sorry for all the questions I'm new to the whole smartphone business. Thanks.
Ok all fixed up thanks for all your help.
Ok guys i need help badly...im new to all this and i stuck at the rom flashing...im trying to put on my x10 this rom [ICS] MIUI V4 FoR X10![Fast and Super-Fast] V2 with the fxp kernel. First thing with this kernel i get freezed on sonyericson logo...thats one problem...fro mtiem to tiem i manage to enter xrecovery and when i flash the rom i get some error like status 7. i rooted, unlocked and done everything i just miss those 2 stepps :/ pls help
draxx318is said:
Ok guys i need help badly...im new to all this and i stuck at the rom flashing...im trying to put on my x10 this rom [ICS] MIUI V4 FoR X10![Fast and Super-Fast] V2 with the fxp kernel. First thing with this kernel i get freezed on sonyericson logo...thats one problem...fro mtiem to tiem i manage to enter xrecovery and when i flash the rom i get some error like status 7. i rooted, unlocked and done everything i just miss those 2 stepps :/ pls help
Click to expand...
Click to collapse
Reflash your Kernel. Wipe Everything (System, Data, Dalvik, Cache). Then try again. Try another recovery and see if it work...cos CWM sometimes throws an error while parsing some scripts while Xrec simply ignores them. try Xrecovery. When in Root Screen Flash-Tool, Identify your device And install a restart into the default Xrec for that ROM.
kunmii said:
Reflash your Kernel. Wipe Everything (System, Data, Dalvik, Cache). Then try again. Try another recovery and see if it work...cos CWM sometimes throws an error while parsing some scripts while Xrec simply ignores them. try Xrecovery. When in Root Screen Flash-Tool, Identify your device And install a restart into the default Xrec for that ROM.
Click to expand...
Click to collapse
It worked! big thanks!!!
i tried to flash a rom in my SE LWW and it didnt respond after reboot.the sony display is shown and the phone wont boot.
so i flashed it with WT19i_4.0.2.A.0.58_(1254-1868).ftf and then rooted it,installed cwm and then tried another rom.
both will install and after the reboot it freezes at sony display.
i followed the correct steps in cwm.still dont know whats wrong.i wanna see a custom rom installed on my phone
i tried to install beats mod without installing any rom also.it showed installed but after reboot i cant see any apk files of beats or anything.
whats wrong somebody help please.
umesh840 said:
i tried to flash a rom in my SE LWW and it didnt respond after reboot.the sony display is shown and the phone wont boot.
so i flashed it with WT19i_4.0.2.A.0.58_(1254-1868).ftf and then rooted it,installed cwm and then tried another rom.
both will install and after the reboot it freezes at sony display.
i followed the correct steps in cwm.still dont know whats wrong.i wanna see a custom rom installed on my phone
i tried to install beats mod without installing any rom also.it showed installed but after reboot i cant see any apk files of beats or anything.
whats wrong somebody help please.
Click to expand...
Click to collapse
Which rom did you try to flash and on which firmware were you on? Also what wipes did you do in CWM?
i tried pureness,windows droid and x-gamer with rage kernel.
and steps followed in cwm is as follows
1. wipe data
2. wipe cache partition
3. dalvic cache
then i installed the zip and rebooted
i also tried the above steps with wipe battery status too
umesh840 said:
i tried pureness,windows droid and x-gamer with rage kernel.
and steps followed in cwm is as follows
1. wipe data
2. wipe cache partition
3. dalvic cache
then i installed the zip and rebooted
i also tried the above steps with wipe battery status too
Click to expand...
Click to collapse
Did you wipe /system also? Its better to select "factory reset" in recovery.
Also try using a different kernel also.
umesh840 said:
i tried to flash a rom in my SE LWW and it didnt respond after reboot.the sony display is shown and the phone wont boot.
so i flashed it with WT19i_4.0.2.A.0.58_(1254-1868).ftf and then rooted it,installed cwm and then tried another rom.
both will install and after the reboot it freezes at sony display.
i followed the correct steps in cwm.still dont know whats wrong.i wanna see a custom rom installed on my phone
i tried to install beats mod without installing any rom also.it showed installed but after reboot i cant see any apk files of beats or anything.
whats wrong somebody help please.
Click to expand...
Click to collapse
you have unlocked your bootloader as well....right??
1. wipe data
2. wipe cache partition
3. dalvic cache
then i installed the zip and rebooted
---------- Post added at 01:58 PM ---------- Previous post was at 01:52 PM ----------
Did you wipe /system also? Its better to select "factory reset" in recovery.
Also try using a different kernel also.
2
umesh840 said:
i tried to flash a rom in my SE LWW and it didnt respond after reboot.the sony display is shown and the phone wont boot.
so i flashed it with WT19i_4.0.2.A.0.58_(1254-1868).ftf and then rooted it,installed cwm and then tried another rom.
both will install and after the reboot it freezes at sony display.
i followed the correct steps in cwm.still dont know whats wrong.i wanna see a custom rom installed on my phone
i tried to install beats mod without installing any rom also.it showed installed but after reboot i cant see any apk files of beats or anything.
whats wrong somebody help please.
Click to expand...
Click to collapse
2 suggestions
1. try another recovery if u prefer cwm install another version
2.format
/system
/data
/cache
see what happens then
i dont know any other recovery..
can u suggest a post in xda?
i tried another version of cwm too.
umesh840 said:
i dont know any other recovery..
can u suggest a post in xda?
i tried another version of cwm too.
Click to expand...
Click to collapse
I think Everything will work fine..
Just follow these steps...
In CWM Recovery
Go to Mounts & storage > Wipe cache , wipe data & wipe System
Then Go to Advanced > Wipe Dalvik-cache
and now install your Rom from Sd card
I hope this 'll work..:good:
I just rooted my phone yesterday and i tryed to flash a new rom but it keeps on showing the start up screen for all my roms i tried to flash plz help
what to do
Tuyeni-boy said:
I just rooted my phone yesterday and i tryed to flash a new rom but it keeps on showing the start up screen for all my roms i tried to flash plz help
what to do
Click to expand...
Click to collapse
Install via CWM. Instructions can be found in CWM and ur ROM thread.
Sent from my frozen Penguin's Nexus 7 with frozen CM 10.2 using frozen Tapatalk 4.FORGOTTEN Pro
Flash a custom rom with cwm..
wipe your data/system first.
wipe catche
install from sd card (Flashable file must be store in root of your sdcard.)
wipe catche
wipe dalvik catche
Imp:
Make your currunt working rom backup before anything you do with your phone. it will save you.
Tuyeni-boy said:
I just rooted my phone yesterday and i tryed to flash a new rom but it keeps on showing the start up screen for all my roms i tried to flash plz help
what to do
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1552792
go to this post and flash the stock firmware via odin.
for installing custom rom, you will need root and cwm
go to recovery mode
choose install zip from sd card
choose the cwm file
this will install the cwm.
now wipe data and cache
go to advanced menu and wipe dalvik cache
then go to choose zip from sdcaed and select the rom
please make sure that you are using a proper custom rom file meant for your phone.
hit thanks if it helped
Not able to boot into system
Hi,
i was using baidu rom from quite some time. today while rebooting mistakenly instead of selecting the reebot i selected the recovery option and now i am not able to boot into my system every timei switch on my phone the cwm recovery is opening. i have tried to reinstall the same rom and the others as well but nothing is helping. ihave even tried the backup of saved past rom but still nothing is happening.
please help me..
shreyanshbengani92 said:
Hi,
i was using baidu rom from quite some time. today while rebooting mistakenly instead of selecting the reebot i selected the recovery option and now i am not able to boot into my system every timei switch on my phone the cwm recovery is opening. i have tried to reinstall the same rom and the others as well but nothing is helping. ihave even tried the backup of saved past rom but still nothing is happening.
please help me..
Click to expand...
Click to collapse
DO THIS
1. before re flashing the baidu rom do clear cache/ factory reset and wipe partition.
If it still doesn't works then
2. download an official firmware and flash it via odin, then re-root your device and flash baidu rom. It work work 100%
Let me know for any further assistance
akky26 said:
DO THIS
1. before re flashing the baidu rom do clear cache/ factory reset and wipe partition.
If it still doesn't works then
2. download an official firmware and flash it via odin, then re-root your device and flash baidu rom. It work work 100%
Let me know for any further assistance
Click to expand...
Click to collapse
Thanks a lot for your help
Flashing rom didn't helped but i just flashed cwm again and my problem was solved.