Related
I made this to tide myself over until $auron can finish UrukDroid 0.6. This is a combination of the stock Archos 2.1.04 firmware, Ardatdat's Overclocked Kernel, and a manual EXT4 Conversion. It is permanently rooted and includes SuperUser. My main reason for making it was to enable read/write access to the filesystem, which rooting DOES NOT do on the stock Archos firmware, as the squashfs will still be mounted read only by /etc/mountpoints. Also, EXT4 is much faster than the compressed squashfs Archos uses. Quadrant gives ~2200 with the data partition converted to EXT4 as well, ~1800 without conversion. I have already updated Busybox to a fully compiled version, 1.16, another thing Archos decided to "secure" despite the supposed Open Source status. I have NOT edited the .hosts file to block ads, as I believe the app developers deserve to make some money, you'd be amazed how little they make, but you can do it yourself without Archangel scripts now, as the filesystem will be read/write again.
I designed it on an A101it, but it should work on any Gen8 with internal flash storage. A70H users, I can't remember your block allocations, it may work fine, but I'll need someone to post the storage layout of /dev/block/ to be sure.
For the power users, here's a quick install outline: First, make a second partition on your storage/sdcard in EXT4, extract the rootfs.tar.gz to it, and flash the appropriate initramfs and zimage. Pretty easy.
For the rest of you(probably most of you):
There is only one short step in Linux, which is setting up an EXT4 partition on your Internal Storage or your SD Card. You must make it as a second partition, not 1st, 3rd, or anything else. This means you can still use it as a storage device as well as running Android. I find it incredibly simple, and can be done in less than 3 minutes, but I will be relying on you guys to tell me what you don't understand, and I will update the instructions as needed.
This can be run off the SD Card or the Internal Storage, both versions are included in the download. It will use the existing data partition if you already have the SDE installed and 2.1.04 firmware. Otherwise, you will need to flash the SDE, which erases your data, so please use Titanium Backup first if necessary.
Step 1:
Download my files:http://www.multiupload.com/HR6SRRR8P8
And install the SDE from Archos: http://www.archos.com/support/download/firm_dev/firmware_archos_android_gen8.aos.
Step 2: Boot into stock Android and connect to a Linux PC. If you do not have Linux, download Tuxboot and use it to create a GParted Live Disk:http://gparted.sourceforge.net/liveusb.php
Step 3:
Mount your Internal Storage/SD Card from the Archos. It should now show up in GParted on the Linux PC, make sure you have the correct device selected, it should be called Archos A101T(make note of the location, e.g. /dev/sdb). Resize your existing partition with GParted, leaving about 300MB at the end of the Internal Storage/SD Card. Make a new partition in the empty space, and select ext4 as filesystem. Apply Changes. Now open a terminal, elevate yourself to root by typing
Code:
sudo -s
and format the new partition by typing
Code:
mkfs.ext4 -O ^huge_file /dev/sdb2
Substitute "sdb" for whatever your device location was in GParted. The "2" on the end of "sdb" denotes that it is the second partition. Do NOT format "sdb1" or any other "sd"s. Mount the new partition by opening Nautilus or any other file manager and double clicking on the "300MB Filesystem" entry on the left. Untar the rootfs.tar.gz from my files with the Archive Manager, it works just like winzip or winrar, into the root of the new partition. Eject the device from Linux, then reboot into the Developer Menu by holding vol- or vol+ while booting.
Step 4:
Flash the initramfs.cpio.gz and the zimage from my files. Use the files from the "internal" folder if you are running from Internal Storage, or the files from "sdcard" if you are running from the SD Card.
Step 5:
Use the Dev Menu to boot into Developer Edition. Let me know about any bugs. After I removed the Android Boot option from the Dev Menu, I had a few strange loops of the Archos animation while booting, but it did boot, and function, just fine.
Thanks go to Ardatdat for the kernel, Archos for the crappy "securing" of the squashfs, and $auron for motivating me to get back into development.
Hi msticninja ,
I did it It seems so smooth. I used my internal storage. But linux steps were not so simple for me I used a Fedora 14 VMWare image.
I'm at work so I can't play with it but it seems stable and it can awake.
Quadrant (I know it's not accurate) score is about 1900 (internal and ext4).
I think that you should add some descriptions about linux steps (for noobs like me).
Thanks...
PS: Did I move my DATA partition to EXT4? (I did all steps you wrote). If no how can I do?
Nice work! I'll be trying to add more instructions for the Linux section for the next couple of days.
Your data partition is still EXT3, I haven't found a very easy way to convert it yet. Basically, I made another partition on the Internal Storage, copied the data partition there, and flashed a new initramfs to boot off the new data partition. Then you fdisk and format the original partition from a terminal in the Archos or ADB, copy everything back, and flash ANOTHER initramfs to use the original, now EXT4, partition.
So far, I don't think the performance gain for the data partition is worth all that work.
It works and installs well but your guide how to install it is not complete. For example, I had to manually maintain write permissions of the partition and sudo is needed by the mkfs.ext4 -O ^huge_file /dev/sdb2
Hondaracer said:
It works and installs well but your guide how to install it is not complete. For example, I had to manually maintain write permissions of the partition and sudo is needed by the mkfs.ext4 -O ^huge_file /dev/sdb2
Click to expand...
Click to collapse
Sorry, i automatically elevate permissions when I do stuff like this. I've added sudo to the instructions. As far as manually maintaining the partition permission, what did you have to do there?
msticninja said:
Sorry, i automatically elevate permissions when I do stuff like this. I've added sudo to the instructions. As far as manually maintaining the partition permission, what did you have to do there?
Click to expand...
Click to collapse
I had to type this: sudo chown -R username:usergroup /media By the way thanks for the work you've done
Hondaracer said:
I had to type this: sudo chown -R username:usergroup /media By the way thanks for the work you've done
Click to expand...
Click to collapse
If that was before using mkfs.ext4, then that is strange. After mkfs though, the owner should be root. I should point out that the rootfs.tar.gz should be extracted as root, which means you have to open the archive manager from a terminal. I need to find an easy process that will work on all distros, as I don't know how many have nautilus installed.
Thanks for your replies, this is much needed feedback.
msticninja said:
If that was before using mkfs.ext4, then that is strange. After mkfs though, the owner should be root. I should point out that the rootfs.tar.gz should be extracted as root, which means you have to open the archive manager from a terminal. I need to find an easy process that will work on all distros, as I don't know how many have nautilus installed.
Thanks for your replies, this is much needed feedback.
Click to expand...
Click to collapse
I had to do this to be able to write the rootfs to dev/sdb2. But I must say I did a reboot before I copied the files cause Ubuntu started to act very weird. And for the beginner I'd might be good to mention that you have to unmount in GParted.
I've tried it and feels slower than Uruk 0.6RC2 on Scandisk SDHC 8GB Class 4 (without OC).
Thank you for your great work!
chisco said:
I've tried it and feels slower than Uruk 0.6RC2 on Scandisk SDHC 8GB Class 4 (without OC).
Thank you for your great work!
Click to expand...
Click to collapse
I'm not surprised. This is the stock firmware with none of Uruk's enhancements, other than ext4 and a new kernel. As i said, this is to tide people over until the official Uruk thread gets 0.6. You're already on the beta 0.6, so there's not much need for my firmware.
I just wrote an automatic install script. All you have to do is copy a file to your internal storage or sd card, and flash the initramfs/zimage in the Dev Menu. This one will replace the current Archos partition so you won't lose any space on your storage device. Should be uploaded tonight.
I tried this method with last OC Kernel (11 FEB): very good... With this method, we use same data as for stock ROM, so no need to reinstall all apps...
Thanks.
My sdcard(class 4 8gb sandisk) is causing problems with fat32 fs...i use debian all the time and wud like to have a much advanced fs like ext4 for saving my music,videos,pictures etc instead of fat32...how can i achieve taht...Does android use a fstab or something for mounting on boot ???
I'm quite sure android uses fstab for mounting, you just need to set the proper mounting option on your FS to force it to check fstab options. I have one question(since I don't use a linux machine), can you access your ext(2nd) partition(if you have one) when you connect your phone to the PC using debian?
Yep,Android uses fstab to mount all.
anybody interested in setting it up i dont have the requisite knowhow
I have not toyed with fstab myself... but I did find this page which seems to have want your looking for.
http://androidandme.com/2009/08/news/how-to-manually-partition-your-sd-card-for-android-apps2sd/
It isn't exactly what your explaining, BUT seems to go through the commands needed for what you are wanting to try.
Just remember to back up! Good luck!
Sent from my LG-P500 using XDA App
Instructions:
-Suggested at least fat32 partition to be 1gig and the rest to your ext partition. Also, try to use root explorer for everything else. Must have init.d support.
1. On your SD card, make a folder to serve as a door/portal to access your ext partition files.(When testing this, I just used the default "/sdcard/media" folder)
2. Make a blank text file and name it as "11usext"
3. Using root explorer, edit the file and add this line inside it:
Code:
#!/system/bin/sh
busybox mount -t auto /dev/block/mmcblk0p2 /mnt/sdcard/media
change media to the folder that you just made on step 1. Exit and save.
4. Using root explorer move this file to /system/etc/init.d
5. Again using root explorer, change the permission to "rwxrwxrwx"
6. Reboot and play. This would allow you to access your ext partition through the /media or the folder that you have created.
If this does not work, then you should give more details on what setup you are running.
ungaze said:
Instructions:
-Suggested at least fat32 partition to be 1gig and the rest to your ext partition. Also, try to use root explorer for everything else. Must have init.d support.
1. On your SD card, make a folder to serve as a door/portal to access your ext partition files.(When testing this, I just used the default "/sdcard/media" folder)
2. Make a blank text file and name it as "11usext"
3. Using root explorer, edit the file and add this line inside it:
Code:
#!/system/bin/sh
busybox mount -t auto /dev/block/mmcblk0p2 /mnt/sdcard/media
change media to the folder that you just made on step 1. Exit and save.
4. Using root explorer move this file to /system/etc/init.d
5. Again using root explorer, change the permission to "rwxrwxrwx"
6. Reboot and play. This would allow you to access your ext partition through the /media or the folder that you have created.
If this does not work, then you should give more details on what setup you are running.
Click to expand...
Click to collapse
That's a quite dirty implementation. All he want's is an ext4 partition mounted as /sdcard. I want to do the same, but right now I'm messing with the internal fs. I'll look into it.
That's a quite dirty implementation.
Click to expand...
Click to collapse
Dirty it might be(I even tried a dirtier one), but that's all he's got at the moment. If you have a better solution(even just a rough plan), please do share. Maybe we can exchange knowledge on stuff like these.
Using 2 Ext4 partitions on SD instead of one Ext+fat32
Click to expand...
Click to collapse
Would mean that no Fat32 partition exist, and I've never heard of anything like that.
I have one question(since I don't use a linux machine), can you access your ext(2nd) partition(if you have one) when you connect your phone to the PC using debian?
Click to expand...
Click to collapse
And since no one answered this, I have no idea how you could transfer files to your phone without using card readers.
ungaze said:
Dirty it might be(I even tried a dirtier one), but that's all he's got at the moment. If you have a better solution(even just a rough plan), please do share. Maybe we can exchange knowledge on stuff like these.
Click to expand...
Click to collapse
Probably it involves messing with the init.rc (and I think that involves messing with boot and recovery images, but, I'm not sure) or init.d scripts or fstab. Anyway, I'm not sure, but it should be possible.
ungaze said:
Would mean that no Fat32 partition exist, and I've never heard of anything like that.
Click to expand...
Click to collapse
Yes. The /sdcard partition would exist, just not fat32 formatted.
ungaze said:
And since no one answered this, I have no idea how you could transfer files to your phone without using card readers.
Click to expand...
Click to collapse
Linux systems can read and write to ext4 partitions without problems. In fact, it's a linux filesystem. I had problems once when I had a sd_ext partition (for Apps2SD), because both partitions would get mounted when using mass storage mode, while Android only unmounts the /sdcard (fat32) partition, leading to file corruption (because of the same partition being mounted on both systems at once).
We could create the partitions using gparted or cfdisk on a pc. I'm not sure, but maybe simply mounting it with different params (like the filesystem type and other options) at /sdcard would do the trick. Everything else that follows would be easy.
I've been doing some testing and research.
On recovery side:
I've done a little modification in Mik's ClockWork recovery to make it accept ext4 and vfat as valid file systems for the first partition on sdcard. It involves just a little change on /etc/recovery.fstab file, but then you need to rebuild the recovery image.
This is working fine.
On the OS side:
It's not an easy mod. It involves patching the vold (volume manager) and recompiling. There are some proposed patches to Cyanogenmod, but I don't know if it's been accepted and if it made it to Miks CM7 port.
I'll do some tests and post results.
ilarrain said:
I've been doing some testing and research.
On recovery side:
I've done a little modification in Mik's ClockWork recovery to make it accept ext4 and vfat as valid file systems for the first partition on sdcard. It involves just a little change on /etc/recovery.fstab file, but then you need to rebuild the recovery image.
This is working fine.
On the OS side:
It's not an easy mod. It involves patching the vold (volume manager) and recompiling. There are some proposed patches to Cyanogenmod, but I don't know if it's been accepted and if it made it to Miks CM7 port.
I'll do some tests and post results.
Click to expand...
Click to collapse
This got my interest
Mik's CM7 (beta 6.2) recognizes and mounts the ext4 partition just fine.
BUT:
As vfat is a non posix fs, there wasn't any need for the OS to manage permissions, so it's a mess.
Applications on the SD card (I'm not using Apps2SD or Data2SD) don't load, internal applications can't be moved to SD, and many apps can't store data on the SD, even I've set read+write permissions on all files and directories (chmod -R 777 /sdcard/). I have no idea why. I'm stuck.
Just installed link2sd earlier (formatted partition as ext3). Wanted to flash a different rom. Trying to backup my phone, and clockworkmod tells me it can't mount sd-ext. Anyone know a reason and/or work around?
I think CWM works only with ext4 partition AFAIK. So, you can re-partition your sd card to a ext4 partition using CWM, or you can format the ext partition only to ext4 using a computer.
YouArePoop said:
Just installed link2sd earlier (formatted partition as ext3). Wanted to flash a different rom. Trying to backup my phone, and clockworkmod tells me it can't mount sd-ext. Anyone know a reason and/or work around?
Click to expand...
Click to collapse
which version of CWM have you got?
3.0.2.4, which I've used for a while now, always tries to back up my 6GB ext2 debian partition unless I remember to change cards first. no way I leave room in the vfat partition to back up that much data.
I'll put it up on 4shared if you want it.
mihir287 said:
I think CWM works only with ext4 partition AFAIK. So, you can re-partition your sd card to a ext4 partition using CWM, or you can format the ext partition only to ext4 using a computer.
Click to expand...
Click to collapse
Guess when I get home I'll copy the contents to computer, reformat, and copy back. Hopefully link2sd will notice the formatting has changed and reset itself
Sent from my LG-VM670 using XDA App
Doesn't work with extra either. Version 3.2.0.1 I believe it was.
Guess it doesn't really matter, can just use titanium since its all app stuff on there anyways...
Sent from my LG-VM670 using XDA App
i use CWM to back up my 512MB ext2 partition for my data2ext all the time (with the rest of the backup) and it seems to have no problem, and just to check i just mounted the partition in mounts and storage and it mounts fine. I know some recoveries ive used in the past on other phones would have problems with partitions that were not in 64-128-256-512-1024 MB, etc. format because of block size issue errors that i would get (when mounting or trying to set block size to 4096). I also found that when partitoning/formatting to ext2/3/4 some programs do not properly write the drive formatting and certain systems/recoveries/apps could not properly read them on the android. the best most consistent (android friendly) formats that i have gotten to date were in ubuntu (or any other) linux using "gparted". It seemed to always be the best and usually better than the format done by the phone recovery. Hope this helps. Sorry to drone on and on.
Partitioned originally with gparted. Have since resized to be 2048, and set its label to 'sd-ext'. Now instead of getting an error saying sd-ext might not be supported on my device, it just gives me a generic 'error mounting sd-ext'
I've had ext partition mounting problems before, I'm not sure if the cause is something to do with vold or what, but
after unmounting a sd card to exchange it with another one, it changes the device partitions in /dev/block like
/dev/block/mmcblk1p2
for the sd-ext partition instead of the normal
/dev/block/mmcblk0p2
you can see if this has happened by
Code:
ls /dev/block
in adb shell.
to mount it manually, if the numbering is off,
Code:
mount /dev/block/mmcblk1p2 /sd-ext
I've only had this happen with android running, but it might work in recovery too
Switched over to using data2ext. Mounts the 2nd partition as the /data partition instead of /sd-ext. Can manually mount 2nd as /sd-ext from within rom, but it doesn't carry over to recovery.
A possible solution... Create a symbolic link pointing /sd-ext to the 2nd partition? But then again, since /data now points to 2nd partition, is recovery picking up on that unknowingly and backing up the 2nd's contents when it thinks its backing up the normal /data?
I suppose I should investigate.
Edit: Yep it does backup the 2nd partition, thankfully. Just tried to install a theme made in UOT Kitchen, it borked some stuff, and the restore worked.
Hi!
Partitioned my 32GB sdcard, and put CM10.2 on it, but when I check it I have only about 400mb of space or something like that. I had the same amount of space on a 4GB sdcard I used before. Why am I not able to use up the rest of the GB's?! Can someone tell me how to fix it, I don't know if I'm partitioning wrong or doing something wrong, but I want to be able to have lots of extra space for music, apps, etc. Please help! Thanks!!!
I believe you used a low level utility like dd or similar to flash an image onto a partition.
You need to run fsck on that partition, then run resize2fs to expand the ext2/3/4 partition.
Let's say your partition is /dev/block/mmcblk1p1
You would do (in a terminal):
adb reboot recovery
adb shell
# umount /dev/block/mmcblk1p1
# e2fsck /dev/block/mmcblk1p1
# resize2fs /dev/block/mmcblk1p1
After that, your partition will get expanded to whatever size you made it.
It takes a while so be patient. The larger the partition, the longer it will take.
Zenile said:
Hi!
Partitioned my 32GB sdcard, and put CM10.2 on it, but when I check it I have only about 400mb of space or something like that. I had the same amount of space on a 4GB sdcard I used before. Why am I not able to use up the rest of the GB's?! Can someone tell me how to fix it, I don't know if I'm partitioning wrong or doing something wrong, but I want to be able to have lots of extra space for music, apps, etc. Please help! Thanks!!!
Click to expand...
Click to collapse
if you got a prebaked image of a bootable cm card from somewhere, then it usually has 4 partitions on it that were set to the sizes the author of the card specified.
/boot
/system
/data
/sdcard
You would need to put the card in a PC, and use a disk partitioning utility to resize the partitions
some of the images include additional flash files that you install to expand the card's partitions for you. (succulent's), but
you have to do it as you install for the first time.
I prefer to build the card empty first, and load the boot files and zips manually.
linux tools like gparted, Parted Magic , booting from a live USB or CD work pretty well.
Windows based ones like Easus Partition master, or Paragon, not so good.
Mini Tool partition wizard (windows/free) sometimes works
this looks to be a decent write up
http://www.mobileread.com/forums/showthread.php?t=202660
mikeataol said:
...
I prefer to build the card empty first, and load the boot files and zips manually.
linux tools like gparted, Parted Magic , booting from a live USB or CD work pretty well.
Windows based ones like Easus Partition master, or Paragon, not so good.
Mini Tool partition wizard (windows/free) sometimes works
this looks to be a decent write up
http://www.mobileread.com/forums/showthread.php?t=202660
Click to expand...
Click to collapse
The write-up is also posted on XDA at http://forum.xda-developers.com/showthread.php?t=2098419. It was written back in the days of CM10.1, so to use it for CM10.2 or CM11:
Obtain the boot files: MLO, u-boot.bin, and flashing_boot.img -- as well as the files boot.img and recovery.img, from the /boot partition of the pre-made SD CM image. Make sure that MLO is the first file to copy to the freshly made /boot partition.
Substitute in the appropriate ROM and Gapps zip files corresponding to the particular CM build of interest.
Hi!
I wanted to reformat my internal sdcard to ext4 today to enable trimming (it should also help the /data partition, because it is on the same physical flash storage, right?).
To back up my data I thought about packing everything into a TAR archive to also save all permissions (for example of the ./Android/data/ folder). But now I have the following problem:
if I browse through /storage/sdcard0, I see all the permissions and the correct owners, but I dont have access to .android_secure. I am using a adb root shell, how can I not have access to this?!
if I browse through /mnt/media_rw/sdcard0, I have access to .android_secure, but all the file owners are set to "media_rw", which is not what I want to backup, I need the correct owner info to correctly restore the data later.
Could you please help me to answer these questions?:
As I understand, FAT doesnt support permissions, so how does android emulate the permissions in the ./Android/data folder?
How can I see the same folder (my internal sdcard) with different file owners? Is it mounted twice with special options?
How can I backup my whole sdcard (with owner/group info & permissions & file access dates) to restore everything 1:1 after reformating to ext4?
How do I reformat my sdcard to ext4? (which block device comes after "mkfs.ext4"?)
Thank you very much!!
GridLockFour said:
Hi!
I wanted to reformat my internal sdcard to ext4 today to enable trimming (it should also help the /data partition, because it is on the same physical flash storage, right?).
To back up my data I thought about packing everything into a TAR archive to also save all permissions (for example of the ./Android/data/ folder). But now I have the following problem:
if I browse through /storage/sdcard0, I see all the permissions and the correct owners, but I dont have access to .android_secure. I am using a adb root shell, how can I not have access to this?!
if I browse through /mnt/media_rw/sdcard0, I have access to .android_secure, but all the file owners are set to "media_rw", which is not what I want to backup, I need the correct owner info to correctly restore the data later.
Could you please help me to answer these questions?:
As I understand, FAT doesnt support permissions, so how does android emulate the permissions in the ./Android/data folder?
How can I see the same folder (my internal sdcard) with different file owners? Is it mounted twice with special options?
How can I backup my whole sdcard (with owner/group info & permissions & file access dates) to restore everything 1:1 after reformating to ext4?
How do I reformat my sdcard to ext4? (which block device comes after "mkfs.ext4"?)
Thank you very much!!
Click to expand...
Click to collapse
I'm not sure the answer to some of that, but you don't need ext4 for trimming(EDIT: although I don't know whether android enables trim on FAT) and /data is already ext4 by default. The /data partition is separate to /sdcard0
Most if not all gains from trimming would be made from trimming /system, /data, /cache, and /preload(if you use touchwiz based rom or stock)