Well, I have had the 3D since launch. After the first couple of days I started seeing phantom touches. After 1 week I started to notice this was getting far worse and that the display/digitizer was registering touches when nothing was near the device.
Called Sprint walked through a full wipe of the OS and reinstall. That was a no go and wasted nearly 2 hours of my time on the phone... However the Level 2 tech agreed that it appeared to be a failure of the device and advised that I return it to the Sprint store.
Got to sprint and showed them the video I had made of what the phone was doing. They also agreed that something was wrong with the phone and replaced it immediately.
Just in case I am not the only one that is having this problem I am uploading the video to youtube... I will share that link with you as soon as it is done uploading.
This is a video showing the issue using the "draw" application:
If you run into similar issues let me know!
I've seen some strange things happen but I figured it was the Otterbox Defender case or humidity here in Florida.
Will watch more closely now. Thanks for the report!
I've also been having strange issues, where touches are appearing out of nowhere. Had to turn off the pattern lock as a result, since I nearly got locked out of my device since it wouldn't register my pattern properly. It seems to 'reset' itself after a couple reboots, but starts acting up again at a later random time. Between the poor GPS performance and this issue, I'm starting to wonder if I upgraded from my Evo 4G a bit too early...
Same thing happens to mine while texting I would click a letter but it would click another one. It just did it once tho
never discount the existence of a true phantom pressing those screens ;p
I have heard of several people with the issue. Kinda makes me nervous. Already swapped 1 due to bad camera.
Sent from my PG86100 using Tapatalk
Same thing happens to my e3d
My touchscreen is having issues lately too. It'll work fine for several hours, then the screen will either be unresponsive or register phantom movements. Sometimes it won't register the lockpattern as I move my fingers, and other times it refuses to swipe left or right between screens. I've been trying to figure out if it's some kind of software or hardware issue, but no luck. I'd hate to return it(since it's my 2nd 3D) but if it continues for the rest of the week, it's going back. I made a video clip of it jumping screens randomly just in case the Sprint store ask any questions.
*update
I installed the paint program like OP did and had similar things happen on mine with the random lines and unresponsive screens. I guess I'll return tonight for 3D #3....
Mine just started doin the same thing lately, any of you have results yet? Did you turn in your phone or did they repair it? I really dont wanna go to the sprint store and turn mine in because i dont want a refurbished unit. 9/10 in the past when ive went through insurance, the phone they send me is broken as well and then it goes round and round. Sometimes my phone will just stop responding to touch, it will have phantom touches and/or on the htc_ime mod keyboard on compact qwerty; the ui, jk, m, . column up and down wont work at all. strange to say the least, never had this happen to any of my phones before.
My launch day EVO 3D is being replaced also due to this issue. She be back up and running with my new phone Wednesday.
Sent from my PG86100 using xda premium
Well mine developed this problem a few days ago.
The top inch or so of the screen and when I get this problem the touch sensitive buttons also dont work sometimes.
My problem and my question is that, I dont have insurance on the phone, I bought it on Amazon from a private party after my EVO 4G was stollen.
If I take it to Sprint can they just replace the digitizer, since this is a defect of the phone and would that even fix this problem?
If you don't have insurance on the phone then you need to go on ebay and search for evo 3d lcd digitizer housing. Yesterday, I paid $50 shipped from usa.
If you cant find a good listing then u can buy the lcd + digitizer (or just the digitizer) without housing. But it's hard work to do these two because those things are glued and painful to disassemble. It will definitely look jacked up after all your hard work. Just get it with the housing (front black plastic)
Here is a usa seller with what i'm talking about but he as no feedback so i didnt buy from him.
http://www.ebay.com/itm/HTC-EVO-3D-...ultDomain_0&hash=item1c20adc044#ht_2172wt_286
There is a hi res disassembly video on youtube.
I've been experiencing this issue lately as well. I've had this phone since the month it was released and it only started acting up as of a couple weeks ago. It started off as the touch screen not registering any touches, not even the capacitive buttons. Then this week it started it started doing the crazy phantom touch thing. In order to get it working, I simply shut off the screen then turn it back on again. It seems to happen less if I'm lighter on the screen. Thank gawd I'm not the only one experiencing this.
Sent from my PG86100 using XDA App
I called a sprint store and they told me that they would either replace the digitizer or the phone for a fee of 35 dollars, since I did not have insurance.
So, I took my phone in and they had another screen that was from another phone that had a different problem.
After they replaced it, he did not charge me
I was happy until I started to drive home and I was checking it some more and realized that the new screen also had the same digitizer problem.
I guess im headed back to Sprint tomorrow hopefully they give me another phone. and I will happily pay the 35 dollars.
Wow thats a real good deal. I never considered taking it for repair. I thought it must be cheaper to do it myself. I hope they can get you a working one. I'm sure they won't try to charge you for it when you go back.
I'm having trouble with my Evo as well, not sure if its the same issue or not.. for about the past week my notification bar will be intermittently unusable, I can't pull it down at all.. then sometimes it'll work. Unfortunately the times I've been near a sprint store it's working fine.. UGH. Also it's been giving me some random letters occasionally when texting, or the most aggravating is when it "clicks" the backspace button and that sticks and it erases whatever text I just wrote. Sounds like a similar issue.. I just wish mine was consistent, sometimes it works perfect.
Call me an idiot but whats the app that you were using!?
Edit:nvm found it haha
Well today i paid the 35 dollars and will be getting another phone
A really good app for testing screen problems is call "touch test"
http://www.appbrain.com/app/touch-test/org.hermit.touchtest
Mine seem to get worse when i had more then one finger on the screen. and it got really bad with just a little bit of preasure on the screen.
I'm having a similar problem but it is only with the capacitative soft keys.
I have problems from time to time. It gets so annoying on Swype because it will leave breaks while I'm Swyping and instead of one word I'll get like four weird words instead. Very cumbersome.
Sent from my PG86100 using Tapatalk
Related
Were you happier with the replacement unit than you were with your original? Were there any additional faults with the replacement unit? Was it worse/better?
I just sent out for a replacement for mine because of under screen dust, dead pixel, the screen tilt, and just to pretty much get a brand spanking new one the day before my 30 days is up. Am just a bit scared I'll get something worse off than what I'm giving up.
There isn't really anything internally wrong with it, besides the dust and the pixel, (the pixel is barely noticeable, but once seen, can't be unseen).
Any input from any of you would be greatly appreciated, and perhaps alleviate and fears I have about it.
My wife had the screen tilt and signal defect.
Her new one we just got yesterday is perfect. No tilt at all.
No dropping every call anymore. No issues with data and WiFi at all.
New one is like my phone. Good to go.
She is now FULLY satisfied.
Sent from my PG86100 using XDA Premium App
I too had to get a replacement. I took mine to the Sprint store for random reboots, keyboard errors, dead pixels (5 to be exact). After testing the phone and them saying it is perfect, I began having problems a week later. Took the phone to Sprint, got a replacement and have had no problems. Speed is faster, the phone does not reboot, the pixels are all there, the screen is perfect. There seems to be no problems that I can report. I think that originally the phone had flaws due to trying to push them out so fast. But after realizing the issues, they corrected and seem to have it down.
johnequickiii said:
Were you happier with the replacement unit than you were with your original? Were there any additional faults with the replacement unit? Was it worse/better?
I just sent out for a replacement for mine because of under screen dust, dead pixel, the screen tilt, and just to pretty much get a brand spanking new one the day before my 30 days is up. Am just a bit scared I'll get something worse off than what I'm giving up.
There isn't really anything internally wrong with it, besides the dust and the pixel, (the pixel is barely noticeable, but once seen, can't be unseen).
Any input from any of you would be greatly appreciated, and perhaps alleviate and fears I have about it.
Click to expand...
Click to collapse
I switched mine out within the 30 days of return, and I have had absolutely no problems whatsoever. Except for green hornet will not play in 3d Can someone PM me on how to fix this? Btw, i returned it because of two dead pixels
mheller91 said:
I switched mine out within the 30 days of return, and I have had absolutely no problems whatsoever. Except for green hornet will not play in 3d Can someone PM me on how to fix this? Btw, i returned it because of two dead pixels
Click to expand...
Click to collapse
I don't know if this will solve your problem, but i read somewhere if you add the watch widget to your homescreen and watch it that way it should work fine.
My first had a lot of problems reboots,fc with basic apps, sometimes would not turn on without a battery pull. My second one works great so smooth but I wish the speaker was louder.
Exchanged for screen tilt: new one is perfect in every way.
BTW, between myself and friends, I have access to 6 3vo's and I've tested them all with the dead pixel test on the market. Not a single dead pixel on any of the six, two of which were launch day units.
Mike
My first one was leaking light at the bottom buttons... and the main defect was the Mobile Network and Wifi would shut off randomly... When turning them back on... they would just sit there saying "Turning on..."
Got the new one... Light doesn't leak and somehow Mobile Network shut off. I'm beginning to wonder if it's me messing with the phone... I am happier with the replacement... and most will still be in the first 30 days... so you can get a brand new one.
Gonna get mine swapped tommoro due to if you shake it slightly it rattles and typing rattle is louder slow net speeds sucks. LOL love the phone.
Damn how I'm not having any of those issues with my phone?; may be I'm blessed lol
Sent from my PG86100 using XDA Premium App
First was perfect except no 3g reception. Second was a total defect in every way... except got great 3g coverage. Third seems to be a keeper. So far its perfect.
Sent from my PG86100 using XDA Premium App
So am I lol
Sent from my PG86100 using XDA Premium App
chrischoi said:
My first one was leaking light at the bottom buttons... and the main defect was the Mobile Network and Wifi would shut off randomly... When turning them back on... they would just sit there saying "Turning on..."
Got the new one... Light doesn't leak and somehow Mobile Network shut off. I'm beginning to wonder if it's me messing with the phone... I am happier with the replacement... and most will still be in the first 30 days... so you can get a brand new one.
Click to expand...
Click to collapse
I do have heavy light leakage on the bottom of my phone. It looks like the screen didn't set correctly.
It's never bothered me. Can't help but love this phone.
Sent from my PG86100 using XDA Premium App
My first one had random reboots and wouldn't sleep... along with a crooked screen, so I exchanged it. The second one still had the crooked screen, but it didn't have random reboots and would sleep properly. However, the speaker was busted. It was extremely low on volume and it would pop every time any audio was played. The third one (that I still currently have) sleeps properly, doesn't randomly reboot, and has a good speaker. It still has the crooked screen though, but it is much less crooked than the first two. I'm tempted to try one more exchange just to get one that has a perfectly straight screen, but I'm scared of getting one that's the same or worse.
Your lucky you got ur unit swapped I'm stuck with mine the lady was a ***** at the store management wouldn't swap mine due to rattle or net hang reportibg the ***** lady that gave me looks when I took my phone in to there main store.
it seems most problems are fixed in later batches. thats good to hear.
reaper24 said:
Your lucky you got ur unit swapped I'm stuck with mine the lady was a ***** at the store management wouldn't swap mine due to rattle or net hang reportibg the ***** lady that gave me looks when I took my phone in to there main store.
Click to expand...
Click to collapse
I think the rattle is the 3D 2D camera switch because mine does that as well but after a quick shake and listen I held the switch and viola no more rattle.
This seems to be more of a software issue than a hardware issue. I'm thinking it might have something to do with the kernel as well but I'm not sure...
Anyway the touchscreen on my rooted Evo 3D with hboot 1.50 is acting up. Sometimes it completely freezes up, and other times when I try and press different parts of the screen, like the the app drawer it just doesn't register. When it freezes up it also affects the soft buttons at the bottom of the phone.
I've tried wiping it several times, and I've also tried this across several different roms, even nandroids, and it is still causing problems.
Any ideas on how to fix this?
Try calibrating your screen threw settings to see if that helps.
Locked & Loaded
""shooter on Deck""
laie1472 said:
Try calibrating your screen threw settings to see if that helps.
Locked & Loaded
""shooter on Deck""
Click to expand...
Click to collapse
I had that thought too but it still didn't work. I should also mention that the only way to "fix" the screen temporarily is to hit the power button and then hit it again to wake it back up. It usually does the trick... for a little bit. Also sometimes it just goes berserk and start pressing things without me even touching the screen
Are you running any kind of lockscreen program such as widgetlocker? I had similar problems when doing so, all issues stopped when I uninstalled.
ifly4vamerica said:
Are you running any kind of lockscreen program such as widgetlocker? I had similar problems when doing so, all issues stopped when I uninstalled.
Click to expand...
Click to collapse
I wish I was so I could fix it but I'm not.
Sorry man, was stabbin in the dark. good luck.
Think it's the Digitizer...
I have the same problem with an Evo3D hboot 1.5 also. It is rooted (ship s-on) I've had the phone for about 4 months, taken good care of it, and thus thought this bug was a software issue as well...
This is what I've tried:
-Factory Data Reset
-Restore Backup partition to original ROM
-Tried different ROMs (sense3.0, olympian xe, sicksense vX)
-Deleted and reformatted SD card
-Leaving SD card unmounted
It seems to be a popular issue, and after searching the CDMA Development forums I have found at least two other threads on the same topic here:
http://forum.xda-developers.com/showthread.php?t=1398048
http://forum.xda-developers.com/showthread.php?t=1383707
I don't have insurance, and rooting hboot1.5 is not reversible, for it is permanently recorded on the bootloader, so I'm assuming that my local Sprint representative will be of little help in the matter. From what I can find it would seem that our options are limited to:
A.) Replacing the Digitizer/LCD assembly. Looks like this runs between $70-$120. Here is a solid video on YouTube demonstrating how to remove and replace the Digitizer/LCD:
http://www.youtube.com/watch?v=suS34kNNuLo
B.) Replace the Digitizer only. From what I've gathered this is a risky maneuver which is best left to professionals with the *right* equipment, however is a much cheaper option, Digitizers are around $20.
I left a message with a local cell repair shop asking if they could replace the digitizer without a new LCD, and expect a response tomorrow probably.
Unless anybody has found an alternate cause/solution to this problem, which I would be eternally grateful for, looks like hardware replacement is the only solution.
2 questions one are you guys using screen protectors some of them will cause issues crazy ones from random clicking to unresponsive screen . Also are you using your phone out in the cold weather or really humid out ? A cold screen and hot hands will also wig it out.
I have a Zagg screen protector, which Radioshack carries for numerous phones; however it was installed when I bought the phone, four months ago, therefore I cannot imagine it would suddenly be the problem.
Also, the screen glitches at room temperature, at the most unfortunate times.
I just flashed Timat Kernels, with no results....
root3dnoob said:
I have a Zagg screen protector, which Radioshack carries for numerous phones; however it was installed when I bought the phone, four months ago, therefore I cannot imagine it would suddenly be the problem.
Also, the screen glitches at room temperature, at the most unfortunate times.
I just flashed Timat Kernels, with no results....
Click to expand...
Click to collapse
I have a zagg on mine I put on no issues for me. How do you carry your phone ? Do you tote it around in your back pocket? Just curious. Some folks have squished there phone sitting on them and messed up the screens. Not sayin you did that . Also folks carry in pocket on hot summer days and sweat gets inside the unit and messes with it.
Also is your phone brand new or a refurbished unit?
The phone is a new unit and I try to be conscious of high-moisture situations, so hopefully that is not to blame. If anything, excessive pressure may have been the cause, from a vacuum-sealed Drycase; but I'm hoping HTC's build quality would withstand such force, which should be minimal compared to being sat on.
Others are experiencing issues with the E3D digitizer, and I'm 90% sure my phone is not misbehaving from physical/moisture damage.
Is there a moisture damage indicator that can confirm/dismiss that theory?
Thanks for the suggestions
root3dnoob said:
The phone is a new unit and I try to be conscious of high-moisture situations, so hopefully that is not to blame. If anything, excessive pressure may have been the cause, from a vacuum-sealed Drycase; but I'm hoping HTC's build quality would withstand such force, which should be minimal compared to being sat on.
Others are experiencing issues with the E3D digitizer, and I'm 90% sure my phone is not misbehaving from physical/moisture damage.
Is there a moisture damage indicator that can confirm/dismiss that theory?
Thanks for the suggestions
Click to expand...
Click to collapse
Check the battery it has a sticker that will turn a solid color if it seen some water or high humidity. Also I think there is one inside the phone.
I have in the pass seen evo's that were refurbs or new units that were sat on the refurbs glass wasn't glued well and moisture got under the glass and screwed the screen up with random issues. New phones can have the same issues I guess if you really put pressure to it tho there sealed pretty well.
If the Digitizer was going bad from pressure your screen would have faint black lines going down it kinda like graph paper.
I have my phone in a trident kraken case it's been doing good so far.
After hours of research, countless nandroid wipes, and even a few ROMs, I have determined this to be a hardware issue! (at least in my case)
Much thanks to Landon4444 for providing a way to test for a lame digitizer
http://forum.xda-developers.com/showpost.php?p=20791773&postcount=40​Here's how to check if this issue is result of a faulty/worn digitizer:
In the phone dial exactly *#*#3424#*#* to access the HTC diagnostic menu.
Choose line test from available options, screen will turn black.
Draw small test squiggle.
Hold phone by corners with fingers/thumbs (landscape).
Gently, twist phone torsional-ly. *GENTLY!*
In my case, certain slight torque creates a false contact in the upper-middle of my screen. Fortunately twisting slightly in the opposite direction HAS RESOLVED THE PROBLEM FOR NOW. (that was easy) However, I would not expect this tactic to work for long, and am looking into getting the digitizer replaced at the cell shop.
Evo 3d help guys!!
Okay so I just got a raise and an Evo 3D part of my boss's incentive package. (I know I have a great boss!!) but anyway its been less than a month and I haven't purchased any of the screen protector stuff or case. It is now 17 degrees in New York and I'll just drop the phone in my pocket while walking but yesterday at the beginning of a date the parking meter wouldn't take my money and upon trying to use my phone it started dialing it's own numbers and wouldn't let me enter any of the numbers for my code (to unlock). *Mind you my date kept telling me all night "Its a sign that you need the iphone" and I totally like the HTC 3D.I tried calibrating **BY THE WAY IT'S NOT ROOTED YETTT* but the only options your given is the GSensor Calibration. I've noticed that after I enter a warm area the phone starts working fine again. I've never had a smartphone and I think,upon finally getting one, that's it's totally ridiculous that the phone stops working because of the weather. At this point I think I have a faulty phone and am gonna return it to only get another 3D,but has anyone heard of this issue and if so how can I fix it. I mean like what if I had a car accident or an emergency and my "smartphone" starts acting up because of the weather???
Hey guys...I put this post up a few days ago and still haven't received a response. my timing to retunr the phone is running short so I NEED SOMEONE TO HELP PLEASE!!...Is this a normal circumstance that my phone is going through? if not I'll return it and get another one.
Its some grounding issue occuring due to maybe screen touching the main board. Its occurs on my phone very frequently and when normal occurs only if i press hard on screen
my phone also freezes up sometimes and goes crazy and it takes it some time for it to start working....
I ended up replacing the unit.it was faulty. Funny thing is I was trying to tell the guy the problem and when he grabbed it he saw it was broken.the problem worsened to the point the the phone was dialing on its own and going haywire.
Sent from my PG86100 using XDA
Like many with the 3d I was having touch screen issues. Ghost touching and inaccurate touches. At first it was infrequent and random but started getting worse and to the point where it became unusable today. I have tep but no stores around here had a digitizer in stock. My phone was useless so in a desperate shot in the dark, I tried putting it in the freezer.
That's right.
I took the battery out, put it inside two ziplock bags and froze it for a few hours. The I took it out. Left it in the bags to return to room temp and then powered it on. I've been using it for a few hours now and haven't had one issue yet.
Please note this might somehow kill your phone and don't try it unless you are desperate.
Sent from my PG86100 using xda premium
My Phone just started acting up bad. I'm looking at replacing the digitizer.
HVAC Wars said:
My Phone just started acting up bad. I'm looking at replacing the digitizer.
Click to expand...
Click to collapse
Mine usually does this when its cold. I have thought about replacing the digitizer but its not frequent enough and locking and unlocking a couple of times fixes it. I would rather deal with it then get the hboot 1.5 crap...
Sent from my PG86100 using xda premium
Mine was fine until last night. Now I can hardly use it. Landscape works somewhat, the only problem is not all apps support it. I found a digitizer+lcd with the full housing for $55 so I jumped on that.
xavier86 said:
Mine usually does this when its cold. I have thought about replacing the digitizer but its not frequent enough and locking and unlocking a couple of times fixes it. I would rather deal with it then get the hboot 1.5 crap...
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Odd, I always have had some sort of problem with my digitizer when I go outside for a cig. I live in WI, so it's about 0 degrees out right now or colder lol (actually tonight it's rather warm outside but meh)
Anyway, About an inch below the top of my phone to about an inch and 1/4 my screen is dead, I could post a screenshot of it if someone wants. I've been thinking about brining it back to sprint but I don't want to risk them updating the hboot to 1.5 lol
It did seem to temporarily fix the device but came back the next day.
They did it to me I hnow have 1.5....they agreed my phone needed to be replaced...then said the 3D is on back order... They asked if i would take a photon...I said yes....that was a week ago....I called today and they said 'oh, the photon is on back order too' that was a 3rd party retailer....
So I called Sprint and there is actually a corporate store close to me....I'm going to get a new phone tomorrow, I hope! Any suggestions on a replacement if they still don't have a 3d!?
I had the same problem. One of the guys at best buy was tryin to say I probably dropped it... I'm like fk u, I got it like this... The other guy checked it out and said,"ive never seen this happen, but looks fine, physically I guess". Checked it for water damage and just replaced it since it hadn't been 30 days. Then I'm seeing more people with the same problem. If u have insurance with sprint, it should be somethin they take in and give u a refurbished one at no charge. At a Sprint repair store
Sent from my PG86100 using XDA App
I got a call today that my replacement 3D was ready to pick up....I was expecting a photon....guess I need to find a tutorial about root w 1.5 and software 2.08
Sent from my PG86100 using XDA App
I am an EVO 3d GSM user for a week.I don't have any problems with ghost touching etc
Is this a problem only for the CDMA users? Some of my friends also got the GSM version and also they don't have any problems.
My digitizer has been acting up lately as well. I may take it into a sprint store and see what they can do with it..... I don't want them to replace my phone with one that has hboot 1.5 or update my hboot to 1.5.
Be careful....when I brought mine in they tried to say "the touch screen is fine, it looks like a software issue..." And despite saying in advance, I left w 1.5 and the promise of a replacement which also came w 1.5
...just my experience....
Sent from my 3VO
I take great care of my phone and this bs started happening to me.
Well, sort of.
My phone will register touches on the screen randomly if I smack the back of the phone (not hard or anything, just a quick smack, like sitting it down on a desk type deal) and it will randomly stop registering touches at all until press the power button to put it in standby, then again to turn it on.
What kind of crap is this? God I can't stand HTC's terrible quality control. I don't have a single mark on my phone. It has NEVER been dropped. It is in flawless condition.
So mad right now.
I feel ya bud.... I am hoping to ride out this replacement till my upgrade in June....
Sent from my 3VO
If I had to take a stab at it, that cold weather means cold fingers, which means no touch screen.... Which means it will appear to be an issue when in fact your fingers r just cold..... Try it out, hold onto a cold drink, let your fingers get nice and cold and touch your screen... No response.... But what do I know... I'm in Florida where its 80 degrees outside
I do know our phones do have issues and I'm not saying the cold is the cause of everyone's issue... Just looking at the big picture... Or trying to. Hope everyone gets it worked out.
Shot from my sharp shooter in 3d
Yeah.....it is a tad colder here in Boston...
Sent from my 3VO
hitman4274 said:
If I had to take a stab at it, that cold weather means cold fingers, which means no touch screen.... Which means it will appear to be an issue when in fact your fingers r just cold..... Try it out, hold onto a cold drink, let your fingers get nice and cold and touch your screen... No response.... But what do I know... I'm in Florida where its 80 degrees outside
I do know our phones do have issues and I'm not saying the cold is the cause of everyone's issue... Just looking at the big picture... Or trying to. Hope everyone gets it worked out.
Shot from my sharp shooter in 3d
Click to expand...
Click to collapse
A friend of mine has the EVO 3D (it's GSM, not CDMA - and I'm seeing a lot of you having the CDMA versions) and I am a Desire HD owner. Both touch screens are great! Also, I can use them with gloves (well, the place where the finger tips are, the material got somewhat rare). In any case, we are not experiencing any problems with his touch screen, and it's -5 to -15 Centigrades outside .
I'd say it's because of the CDMA?! I also heard that some Galaxy S (I9000) users were having troubles with their phones bought from the EU, then brought to US. Screen displaying colours/bars like crazy etc...
I'd say the network pretty much interferes with the internals of the phone. That's just my opinion...
Both the Desire HD and EVO 3D touch screens DO act strange, but that's when it's snowing outside, so the screen gets a bit wet and... you know... it's making it too horny to focus on the touches anymore... he wants more than just a touch... XD
This is an HTC issue, I believe HTC should almost have like a recall for this. Fix it for free. Not by us paying money to get it fixed. I'm dropping HTC phones and going elsewhere for a phone.
sorry wrong thread
FIX~~maybe
Ok so after 24 hours of testing I got ghost touches only 2 times.anyway my phone used to have ghost touches every like 2 min...
Solution: search for "pimp my rom" in the market.(it requires root access btw)
After you install it go to tweaks->touch screen and display and set min. Velocity to 2500 and max velocity to 4500. For your phone the values may differ.so feel free to test other values till you get the best results. Also max events per sec should be at 60. After ur done just apply your settings.top left check Mark.
If this didn't work it could be a hardware issue.but for me it did the trick.I still get some ghost touches so they are not gone forever but its way better now.
Hope this helps peeps.
:laugh:
For the past couple of months, my screen has been detecting too many inputs on the top half of the screen, primarily in the middle of it. One finger seems to produce up to four inputs sometimes, depending on the amount of pressure. I'm not mashing the screen or anything, but I do play the occasional game of pew-pew.
I've tried a keyboard recallibration and a full wipe to no avail. Currently running ViperROM, but I don't think that's the issue. Any suggestions before I try my luck with the repair plan?
I have the same issue. Looks to be hardware related.
Try uninstall third party lock screen...
I'm using sense for that.
I had that issue for a while. I had to completely wipe and change roms. I think I found a lock screen was to blame. as the other poster pointed out.
Using LeeDroid, I got rid of the sense lockscreen and went back to the droid one. Nothing seemed to change.
When this first happened on a previous ViperROM build, I had been using it for a long time. After doing a full wipe and upgrading to the newest version of it, the problem came back immediately. So, I really doubt it's got something to do with that.
Hssarth said:
For the past couple of months, my screen has been detecting too many inputs on the top half of the screen, primarily in the middle of it. One finger seems to produce up to four inputs sometimes, depending on the amount of pressure. I'm not mashing the screen or anything, but I do play the occasional game of pew-pew.
I've tried a keyboard recallibration and a full wipe to no avail. Currently running ViperROM, but I don't think that's the issue. Any suggestions before I try my luck with the repair plan?
Click to expand...
Click to collapse
Download multitouch test free from market.. run it .. set phone on table and watch it.. if u see circles while not touching it.. then you my friend have a bad digitizer (screen)... I've had 3
Sent from my PG86100 using XDA
That's actually how I noticed the extra inputs to begin with. They only show up while touching the screen.
Edit: A little weirdness. I accidentally left it under my laptop for a few hours. Now, I only get one extra input instead of three. It seems to detect up to four just fine, though.
I found my problem related to this was using a screen protector, the anti glare and clear had these phantoms touches, even from breathing on the screen wrong.
Removed since its got gorilla glass anyways, no more issues.
Sent from my HTC EVO 3D X515m using Tapatalk
This is the first phone I've decided to go without one on. So unfortunately, I can't say that's the cause, either. :x
Ive got your answer guys! its the screen digitalizier had the same exact problems for months to the point of throwing it, sometimes i would put a new rom on it and it would fix it for a couple hours and then it would come back I called a cell phone repair place in st louis called. CRP they have local shops and a website you can send it in. It takes about 2 hours if you have a shop around you or send it off. Call around to see if you have any cell phone repair shops near you Ok by now, you guys are dieing too know the price right, $89.99 plus tax for local repair was my price. Beware you can buy this part from amazon with a kit for $25 and theres video guides online too but unless your use to this kind of work ,pay for a shop to do it or buy the whole lcd screen which is over a hundred dollars anyway. I hope my advice helped you guys because im so happy to have my 3vo running like new again.
Sent from my PG86100 using XDA
phreezex said:
Download multitouch test free from market.. run it .. set phone on table and watch it.. if u see circles while not touching it.. then you my friend have a bad digitizer (screen)... I've had 3
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
thanks for that - sonic was doing my head in - when i would run it would freeze and jump as if i wasnt pressing a direction as well - thought it could be a bit dodgy but it looks like the multi touch is working (I guess evo 3d only has 4 point multi touch?)
I've had this issue a good handful of times now. My screen will randomly spazz out where a ton of motions and clicks are happening. Usually turning the screen off and wiping the screen fixes.it, so I've figure the screen was sensitive to oil from our fingers. Today it has happened twice where I couldn't stop it though. Even restarting didn't help once, until going back to the phone 30 minutes later it had calmed down. Anyone else have this problem? I'm thinking about going back to verizon to try another one.
I say take it back. I had a phone do that just not as bad and got a warranty replacement.
Sent from my SCH-I605 using xda app-developers app
Well, took it back. Took about 15 minutes to go in and exchange it for a new one. They did look for superuser, but my phone hadn't been rooted yet so I didn't have that.
Well crap, now this one's speaker doesn't sound right. Everything that is in any way "high pitched" sounds very tinny, like the speaker is blown or something. I started up N64oid to see how bad it was with game music and such and it's extremely noticeable. I'm hoping I can easily exchange this one, but I have a feeling this time it's going to take a lot of arguing...
Lost touch
Well had to take my phone back to bestbuy today due to the screen not working without the s pen. touch would not unlock screen. UGH i knew something was wrong when texting and the l o p and back button would stick or had issues. I am really mad, but best buy hooked me up. I have a new one on order coming Thursday. Let's hope the phone does not have OTA on it.