[Q] question about mod-rom compability - Galaxy S II Q&A, Help & Troubleshooting

hi
i want to do this mod http://forum.xda-developers.com/showthread.php?t=1132721 with the crt effect and the battery percentage on my sgs2.
i have villain 1.4 and wanted to know if this mod is ok to go with my rom??
and also how to install the mod..
i dont want to mess it up and install everything from scratch..

he mod is available in Clockwork mod(flashable through clockwork mod, dont forget to backup), dont forget, its your responsibility when flashing! shocker..
So you flash via CWM same way as you flashed Villain rom .
The man says its for VR 1.4
It also tells you to back up first .
Tested it works on VR 1.4 .
jje

@JJEgan thx for the quick reply..
actually found the effect i wanted on villain tweaks..crt effect and the circle battery with percentage...simple selct and install

Related

[ROM][SGS2][2.3.4] DarkyROM2 XXKH3 BASE

Alright! Robbie DID IT AGAIN! DarkyROM XXKH3 BASE is HERE​
Wooot?
This Base is in-house developed by me and Robbielicious ! It's all done from scratch I hope you all like it
Extended Power
Overscroll Glow
Transparent Status Dropdown
SIP WiFi+3G
Battery Percentage
Root
Busybox
OpenVPN
Bash
Talk2 (working video)
GingerBread Launcher
System Themed as Usual
CRT-Off
SWAP Enabled (SuperCore 1.6 Required)
New Memory Hacks
WidgetPicker
GPS fix
Huge apn list
DEODEXED and running fast
New DarkyROM2 Bootanimation by Goldie
More things that I could not remember
New SuperCore?
Some init.rc changes required by KH3+
Fixed (hopefully) root issues for all
Added SWAP support
How do I get this?
I am rooted!
Get SuperCore_1.6.tar and put it on your SD-Card
Get DarkyROM2 Tool from market
Open app and use "Flash/Install File from SDCARD" to browse to and install the kernel
If you are on anything prior to KH1 you need to select WIPE in DarkyROM2 Tool
After rebooting upload DarkyROM2_KH3_Base.zip to SD-Card and flash it like you did the kernel
Wait for the phone to reboot and flash the new firmware
I am not rooted
Flash SuperCore_1.6.tar with Odin (put in PDA and do NOT tick repartition)
Get DarkyROM2 Tool and Superuser from market
Upload DarkyROM2_KH3_Base.zip to SD-Card
If you are on anything prior to KH1 you need to select WIPE in DarkyROM2 Tool
Open DarkyROM2 Tool and use "Flash/Install File from SDCARD" to browse to and install DarkyROM2_KH3_Base.zip
Wait for the phone to reboot and flash the new firmware
Changes in R2:
Reverted to deleting user apps when wipe is selected. Keeping them caused FCs. Oh well...
Cool! But where are the files?
SuperCore 1.6 Kernel: SuperCore_1.6.tar
DarkyROM2 KH3 Base: DarkyROM2_KH3_Base_R2.zip
wow, great. downloading now
What is AOS bugs?
Nice, will try this one out!
tdesbien31 said:
What is AOS bugs?
Click to expand...
Click to collapse
Battery drain I think
What the?, still laggy browser?.....nice bro...thanks for sharing
FPRobber said:
The bugs ROMs like the AOSP ROM, MIUI and CM have.
Click to expand...
Click to collapse
Uhm, no! The AOS Bug is the Android OS Battery drain bug, which is on all stock 2.3.3 Roms.
FPRobber said:
The bugs ROMs like the AOSP ROM, MIUI and CM have.
Click to expand...
Click to collapse
Edit: Great thanks to the above post
Great, finally! I'm flashing this
Super.....
Sorry guys but please help me i'm nubbie with s2. I've a custom rom now with CWM 1.80 what i've to do to install this new one???
Can i simply take the rom put in sd card and flash with cwm??
Regards
Great news!!!
Waiting for the custom roms !!!
Woooot finally
Darn my battery was just beeping for being empty need to charge it first
whaaaaaaaaaaaaaaat? when did that firmware leak? downloading now..if true u guys r friggin awesome
Wuuusaaaaaaaaa
Sent from my GT-I9100 using XDA App
Awesum! going to give it a shot and after that wait for any of the other devs to pick it up. Which im pretty sure of it wont take long.
cheers
Nice part about the original version is the option to be able to format/repartition your GS2 for a full clean install if anything is running crappy, or at least that works with all the other user_low_ship 3 file releases.
Can I just update the firmare via ODIN, I dont really wanna root my SGS2 as am happy with the stock rom?
I just flashed the KF3 xeuk firmware.....
If you pic the stock odin that you can flash normal
awesome !!!!!!!!!!!!!!! gonna try it right now !!! thanks !!

[Q] some doubts about cm7.1 by grif_07

I wanted to install cm7.1 by grif_07 but had to clear some doubts before trying it coz my primary reason for trying a custom rom is to enable apps2sd. otherwise I am happy with the samsung stock rom.
1. is every feature in the stock rom working perfecly especially like camera and video recording?
2. is apps2sd included in this rom? (important)
3. will I loose swype keyboard? but I believe I can restore it from my titanium backup. correct me if I am wrong.
and also I wanted to know is there some easy way to enable apps2sd in stock rom? without using a pc coz I dont have my pc working now
1) If you're looking for stock abilities , stick to stock .
2) No , but can be downloaded
Sent from my GT-S5830 using XDA App
Install manager by Alfred Neumayer from market is the perfect solution for app2sd on stock rom.
Swype needs some library files if I'm not wrong.
viktorlj said:
Install manager by Alfred Neumayer from market is the perfect solution for app2sd on stock rom.
Click to expand...
Click to collapse
isnt it just like the link2sd app which I use now but I think that kind of apps dont move all the app data to sd something remains in the phone memory.
consegregate said:
Swype needs some library files if I'm not wrong.
Click to expand...
Click to collapse
so it cant be restired with titanium backup?
You can try that. But if it doesn't work, download the beta. There was a huge update and I don't think you'll like to stick to the old stock version.
For a2sd functions for cm7 try s2e
Just register in the beta.swype.com site and the swype installer will be sent to your email account so you can download it with your phone, just install it and swype will be downloaded.
today I found this thread about cf-root kernel
forum.xda-developers.com/showthread.php?t=1158197
I didnt quite understood the instructions there. what I wanted to know is can I enable dtapps2sd just by flashing the "CF-Root-S5830_ dtapps2sd- v1.2.zip" file there or should I flash the "CF-Root-
S5830-v3.7 -b82.zip" kernel first and then flash the other one?
please guys I am in a big confusion now...
hks911 said:
today I found this thread about cf-root kernel
forum.xda-developers.com/showthread.php?t=1158197
I didnt quite understood the instructions there. what I wanted to know is can I enable dtapps2sd just by flashing the "CF-Root-S5830_ dtapps2sd- v1.2.zip" file there or should I flash the "CF-Root-
S5830-v3.7 -b82.zip" kernel first and then flash the other one?
please guys I am in a big confusion now...
Click to expand...
Click to collapse
Off topic, cfroot not for cyanogenmod.
consegregate said:
Off topic, cfroot not for cyanogenmod.
Click to expand...
Click to collapse
no I mean without cyanogenmod can I do it with the stock?
hks911 said:
no I mean without cyanogenmod can I do it with the stock?
Click to expand...
Click to collapse
Yup you can.
hks911 said:
today I found this thread about cf-root kernel
forum.xda-developers.com/showthread.php?t=1158197
I didnt quite understood the instructions there. what I wanted to know is can I enable dtapps2sd just by flashing the "CF-Root-S5830_ dtapps2sd- v1.2.zip" file there or should I flash the "CF-Root-
S5830-v3.7 -b82.zip" kernel first and then flash the other one?
please guys I am in a big confusion now...
Click to expand...
Click to collapse
is a modified kernel (not a rom).. it should be stated on the first line of the CF-Root thread.
i recommend you to use the app like scoffyburito said
swype beta is working fine in cm7 grif (dont forget it's still beta and RC )
at last I figured out how to correctly use link2sd huh...
dont think I need a custom rom now. next step would be some kind of ram optimization script then it will b a perfect droid...
What i have currently:
1.) Stock ROM
2.) CF Root
3.) CF Root dtapp2sd.zip
4.) V6 Supercharger (Memory optimiser)
Everything working beautifully.
Anywhere to get RAM cleaner ?
Hi, umm,
I flashed my ace to cm 7.1 this morning. It runs quite smooth. Although there's 1 thing from the stock ROM i seriously miss - RAM cleaner. I just can't live without it and no application can replace it. I managed to overclock it successfully to 902 MHz (stable) . I'd say CM 7 is awesome, it just needs the Clean RAM option. And if it is somewhere out there, can please some1 tell me where can I find it.
EDIT: 902 MHz isnt stable, just rebooted

galaxyMOD (for chobitv1 to 1.8)

This is a modified theme from chobitdigitalisrom v1.0 to 1.8
what is modified?
1. Systemui
2. Framework.res
3. 3dGallery
4. 14Status bar
5. DialerTab
6. Phone
7. Music
*new boot screen
*new boot sounds
how to install:
boot into stock recovery
then choose apply update from sd card
choose galaxyMOD
wait to boot., Finish.
Downlod Link:
http://www.mediafire.com/?99jydgctahwd7ob
screenies:
is this for STOCK ROM??
for chobit rom only v1 to v1.8,don't use it on stuck u get bootloop more or less..
Hey bro. I can see that you are using mods from my theme. I have clearly mentioned in my thread not to use my work in other themes. So kindly remove my mods fom your theme or if you want to port my theme to other roms plzz post it in my thread do not make a new thread.
Link to my thread
ok bro,i only copy ur status bar background,and ur stat_signal,and the phone,i post it 2 ur thread,thanks..
does dis work on hybrid rom v4?
hello
hello sir, im a super noob i know nothing but download download download, lol.
anw. i havent doing anything to my SGY im just using a Go launcher but i wanna use your post, what should i do to be able to use it? thaaaanks
well u need to flash a custom rom,(chobit rom or creeds v2.0 recommended) after u flash it u can now flash my mod.. to flash a rom first u need to back up ur stock rom using cwm (for anything goes wrong u can flash back ur stock rom) go to the development section then search for chobit or creeds rom,theres an instruction on how to flash them..

Omega v5.2 ROM (default version) vs stock firmware

Hi,
I read up on the Omega v5.2 ROM and it looks very good. I just want to know from those who are already using it, how much better performance is it using the recommended version whcih I think is called the "Default" vs the stock firmware? It is that much smoother and better battery performance?
NocNoc9595 said:
Hi,
I read up on the Omega v5.2 ROM and it looks very good. I just want to know from those who are already using it, how much better performance is it using the recommended version whcih I think is called the "Default" vs the stock firmware? It is that much smoother and better battery performance?
Click to expand...
Click to collapse
No its far to early to be better by anything but a very small margin .
Battery performance is down to the user not the firmware .
jje
JJEgan said:
No its far to early to be better by anything but a very small margin .
Battery performance is down to the user not the firmware .
jje
Click to expand...
Click to collapse
Would you happen to know what apps are removed in the "Bloated Apps Removed version" of the ROM? I can't find the list of apps the developer removed.
NocNoc9595 said:
Would you happen to know what apps are removed in the "Bloated Apps Removed version" of the ROM? I can't find the list of apps the developer removed.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=26636429&postcount=166
Tried Omega 4.2 and 5.2 briefly. Both times it broke Navigon and the camera hung on me. Don't see any benefit of the Hyperx mod. 5.2 caused my phone to warm up noticably.
So you wouldn't recommend 5.2? Also, if I do decide to flash it, do I need to do a full wipe in CWM before I flash it or can I just flash it from stock in CWM?
NocNoc9595 said:
So you wouldn't recommend 5.2? Also, if I do decide to flash it, do I need to do a full wipe in CWM before I flash it or can I just flash it from stock in CWM?
Click to expand...
Click to collapse
Have you done ANY research in the main thread? I don't think so, as all of this is covered there, including instructions (theres even a video to walk you through it). Don't be lazy.
NocNoc9595 said:
So you wouldn't recommend 5.2? Also, if I do decide to flash it, do I need to do a full wipe in CWM before I flash it or can I just flash it from stock in CWM?
Click to expand...
Click to collapse
A full wipe is the recommend, because then you have a clean installation and you beware of strange failures.
An instruction how you should flash Omega ROM is in the development thread (4th post) --> Installation Guide
I don't know if your phone is rootet yet, if so skip the first step and start with booting in CWM recovery.
Had used Omega on my SGS II, now using Omega on SGS III since 3.0. Works great for me, no errors whatsoever.
Omega 5.2 is flawless ok but hyper x mod is useless. It creates noise in video recording. No need to use 30mbps bit rate but if in future 60fps recording come true it will be a charm!!
n70shan said:
Omega 5.2 is flawless ok but hyper x mod is useless. It creates noise in video recording. No need to use 30mbps bit rate but if in future 60fps recording come true it will be a charm!!
Click to expand...
Click to collapse
Do you know how to install the stock camera apk?
I downloaded the zip file from Omega files, extracted it,but I cannot install it.
saldawop said:
Do you know how to install the stock camera apk?
I downloaded the zip file from Omega files, extracted it,but I cannot install it.
Click to expand...
Click to collapse
You have to install it with CWM:
1. Reboot to Recovery (CWM-Menu)
2. Select the zip-File
3. Enjoy
Looking at the tutorial video where it shows Omega 3 being installed on a stock rom where it says "no wipe necessary"
Does the same apply to version 6 ? as my rom is stock & rooted, will all my apps/widgets be lost or recoverable with Titanium, this will be my first custom rom and its looking great, thanks for your patience
Shug69 said:
Tried Omega 4.2 and 5.2 briefly. Both times it broke Navigon and the camera hung on me. Don't see any benefit of the Hyperx mod. 5.2 caused my phone to warm up noticably.
Click to expand...
Click to collapse
i am running omega 5.2 and i assure you i dont have the problems you mentioned... did you do a full wipe install or you just flashed it without factory reset?
irishbogman said:
Looking at the tutorial video where it shows Omega 3 being installed on a stock rom where it says "no wipe necessary"
Does the same apply to version 6 ? as my rom is stock & rooted, will all my apps/widgets be lost or recoverable with Titanium, this will be my first custom rom and its looking great, thanks for your patience
Click to expand...
Click to collapse
As per all Omega no wipe necessary . Wipe only if you hit problems .
jje

[Q][ROM][C.1.0][AROMA] Xperiance Lite v3.0 - 22/3/2013

iam new in forum, so i cant post, in the development thread, thats why iam posting here....i just install the new rom [ROM][C.1.0][AROMA] Xperiance Lite v3.0, and its just great!!
but i have a question and want to report a bug:
BUG: when i go to settings>CPU control its dont load the aplication and gives a error (settings have stopped)
so i dont like the kernel, and cant change it, because of that bug, so my question is: can i flash the stock C 1.0 kernel ? or anyone know how to fix the CPU control ?
one more question, i hate the led light, on the stock rom, i have a script the shutdown the led, but isnt working in this rom, so how to shutdown the led ??
and i dont like the sket font too, can i flash or change only the font ?
thanks
pedromms86 said:
iam new in forum, so i cant post, in the development thread, thats why iam posting here....i just install the new rom [ROM][C.1.0][AROMA] Xperiance Lite v3.0, and its just great!!
but i have a question and want to report a bug:
BUG: when i go to settings>CPU control its dont load the aplication and gives a error (settings have stopped)
so i dont like the kernel, and cant change it, because of that bug, so my question is: can i flash the stock C 1.0 kernel ? or anyone know how to fix the CPU control ?
one more question, i hate the led light, on the stock rom, i have a script the shutdown the led, but isnt working in this rom, so how to shutdown the led ??
and i dont like the sket font too, can i flash or change only the font ?
thanks
Click to expand...
Click to collapse
what phone u use ..???
sola, P. U ..???
ur asking not complete ..??
thx
pedromms86 said:
iam new in forum, so i cant post, in the development thread, thats why iam posting here....i just install the new rom [ROM][C.1.0][AROMA] Xperiance Lite v3.0, and its just great!!
but i have a question and want to report a bug:
BUG: when i go to settings>CPU control its dont load the aplication and gives a error (settings have stopped)
so i dont like the kernel, and cant change it, because of that bug, so my question is: can i flash the stock C 1.0 kernel ? or anyone know how to fix the CPU control ?
one more question, i hate the led light, on the stock rom, i have a script the shutdown the led, but isnt working in this rom, so how to shutdown the led ??
and i dont like the sket font too, can i flash or change only the font ?
thanks
Click to expand...
Click to collapse
Glad to hear you like the rom mate Regarding that error, I think you are missing the app NoFrills, Just download it from market and no more errors [Use the normal version, not classic]
And Kernel cant be changed with NoFrills, only Governors and Schedulers. You need to use fastboot or cwm to flash a kernel
Can you post the script here ? Ill look into it
And changing the font, go to the data/custom/font folder in my zip file, then copy over the contents of 1 into /system/fonts to get back Stock font. After that, seelct the font you want and replace DroidSans and DroidSans Bold with these to finish the job
Hope it helps
Cheers
thats was a fast reply
Min3r said:
Glad to hear you like the rom mate Regarding that error, I think you are missing the app NoFrills, Just download it from market and no more errors [Use the normal version, not classic]
And Kernel cant be changed with NoFrills, only Governors and Schedulers. You need to use fastboot or cwm to flash a kernel
Can you post the script here ? Ill look into it
And changing the font, go to the data/custom/font folder in my zip file, then copy over the contents of 1 into /system/fonts to get back Stock font. After that, seelct the font you want and replace DroidSans and DroidSans Bold with these to finish the job
Hope it helps
Cheers
Click to expand...
Click to collapse
well i instaled Nofrills, and it works, did the trick with quickpanelsettings.apk, and its works, seems your ROM have no bugs:good: now i think the governators will solve my problem, i'll just trying until i found one i like
i attach the scrip to disabel the LED, if you could look and make it works, i'll be glad (i really dont like the LED, its cool to see videos and photos, but i dont like it turning on when using the phone for others stuffs, and the scrip do exact that, disable it, only enable when see videos e photos) the credits to scrip goes to someone tha post it in the forum and i cant find the post anymore
thanks for the tutorial to change the font, i'll use it!
sorry for english, iam from Brazil
thanks
By any chance, did you have Leds U Ctrl installed when you were using the script previously ?
and glad you like my rom Nothing better than a good feedback Try installing Leds-U-Ctrl and see if that script works after that
Let me know how it goes
Cheers
not working
Min3r said:
By any chance, did you have Leds U Ctrl installed when you were using the script previously ?
and glad you like my rom Nothing better than a good feedback Try installing Leds-U-Ctrl and see if that script works after that
Let me know how it goes
Cheers
Click to expand...
Click to collapse
I found the Ilumination Bar app, that works GREAT for turning off the LED.
..the fonts iam having a noob problem to change it, is there a change of anyone make a zip install for change it to the original one ??
about the kernel...i have to say that i dont like it, i try diferent governators, and all lag the phone (i try the recomended one in the main thread) so a really CANT flahs the original C.1.0 Kernel ?
thanks
Good to know you got 2 problems sorted
I suggest you check out Font Changer in Themes n Apps Section for easy font changing
And Kernel, Stock C.1.0 kernel works fine with my rom Just flash it with Flashtool and enjoy
KERNEL
Min3r said:
Good to know you got 2 problems sorted
I suggest you check out Font Changer in Themes n Apps Section for easy font changing
And Kernel, Stock C.1.0 kernel works fine with my rom Just flash it with Flashtool and enjoy
Click to expand...
Click to collapse
@Min3r
Can you post only the kernel of your rom as a installable zip ? i flash the stock, but now i see that u post a hotfix, and i want try it again..
thanks
My rom doesnt include a kernel so just use the Stock one you have now
delay in whatsapp
Min3r i notice that iam having some delay to receive the whatsapp and facebook notifications or any other app that uses data, is something in configuration( deep sleep is not actived) or its some tweak that you did to preserve battery ??
thanks
I dont think that would be a cause of the rom cause I havent modified anything to create such issues
fixing app in ram
@Min3r
is there a way to fix some apps in RAM, like Zexperience did? like de dial,contacts and some others, to avoid lag when using them ?
thanks
no Exchange account
Just installed Xperiance Lite but I am unable to install my bussiness mail using push / exchange. Beside mail I use this account for synchronizing my telephone contacts
Any option or do I need to switch to another custom rom?
I am using Xperia U - ST25
Thanks for your reply
Found a solution in another thread
http://forum.xda-developers.com/showthread.php?t=2091497
Works great!
Sent from my ST25i using xda app-developers app

Categories

Resources