Finding all types of different info for this phone. Everything seems fairly old. The phone is on 2.2.1 with ED04. I would be very greatful if someone could shoot me a link to a working method.
Lots of threads I'm finding have dead links as well so I kind of stuck.
Edit, sorry if this is in the wrong section my bad.
lightsout said:
Finding all types of different info for this phone. Everything seems fairly old. The phone is on 2.2.1 with ED04. I would be very greatful if someone could shoot me a link to a working method.
Lots of threads I'm finding have dead links as well so I kind of stuck.
Edit, sorry if this is in the wrong section my bad.
Click to expand...
Click to collapse
Click HERE and download superoneclick and unzip it.
When you are done, plug your phone to computer (with Debugging Mode "On") and open up SuperOneClick then click "Root".
Info on rooting this phone is going to be rather old considering just about all the recent roms for the fascinate root the device during the flashing process...if you are just trying to root the phone to obtain super user permission to install certain apps you can use the z4 method or super one click or, what I recommend is to find a rom you would like to flash...comm rom 2.0 for example and see if it contains root access...(comm rom is one example that does just this)..so I guess a question back to you is in order...what are you looking for...root access, custom rom, or both?
Sent from my SCH-I500 using XDA App
efan450 said:
Info on rooting this phone is going to be rather old considering just about all the recent roms for the fascinate root the device during the flashing process...if you are just trying to root the phone to obtain super user permission to install certain apps you can use the z4 method or super one click or, what I recommend is to find a rom you would like to flash...comm rom 2.0 for example and see if it contains root access...(comm rom is one example that does just this)..so I guess a question back to you is in order...what are you looking for...root access, custom rom, or both?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Im pretty sure Z4 root hasnt worked since DL09 update.... SOC is the way to go.
Sorry for not being clear. I want to root and install a custom rom and cwm. I did notice some of the Tom's seemed to be the whole package.
Thanks for the info. I'll go digging into some roms now.
lightsout said:
Sorry for not being clear. I want to root and install a custom rom and cwm. I did notice some of the Tom's seemed to be the whole package.
Thanks for the info. I'll go digging into some roms now.
Click to expand...
Click to collapse
Don't be sorry...this is the q and a section !
All you will have to do is download the rom of choice and put it on the root of your sd card...not in a folder, download odin to your pc install any necessary drivers, make sure your pc will recognize your device at this point, and download your cwm file to your pc and save it in the odin folder..(I use the 3-30 fix all file) connect your phone to pc using stock samsung usb cable, pull battery hold the down volume button...this will put you in download mode, once odin sets up a com port, click the pda button and only the pda never click phone. flash your cwm file, when odin is done install your batt and hold volume up, down, and power until cwm appears, (if you let the phone boot fully you will have to re odin since the stock kernel will over write cmw) at this point you will do a factory reset, wipe cache, and go to advanced and wipe dalvik cache then go to install zip from sd, find the rom you put on your sd card earlier and select install zip, if your rom does not contain a kernel you must flash the kernel also prior to your first boot up or you will have to re odin.
I also suggest backing up your contacts via exporting then to sd v card or backing up via g mail...after all is said and done reboot back to cwm via up, down, power button and do a nandroid back up to save you phone as is...just in case! You can always restore back to that point.
sent from my SCH-I500 using XDA App
efan450 said:
Don't be sorry...this is the q and a section !
All you will have to do is download the rom of choice and put it on the root of your sd card...not in a folder, download odin to your pc install any necessary drivers, make sure your pc will recognize your device at this point, and download your cwm file to your pc and save it in the odin folder..(I use the 3-30 fix all file) connect your phone to pc using stock samsung usb cable, pull battery hold the down volume button...this will put you in download mode, once odin sets up a com port, click the pda button and only the pda never click phone. flash your cwm file, when odin is done install your batt and hold volume up, down, and power until cwm appears, (if you let the phone boot fully you will have to re odin since the stock kernel will over write cmw) at this point you will do a factory reset, wipe cache, and go to advanced and wipe dalvik cache then go to install zip from sd, find the rom you put on your sd card earlier and select install zip, if your rom does not contain a kernel you must flash the kernel also prior to your first boot up or you will have to re odin.
I also suggest backing up your contacts via exporting then to sd v card or backing up via g mail...after all is said and done reboot back to cwm via up, down, power button and do a nandroid back up to save you phone as is...just in case! You can always restore back to that point.
sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Wow thanks a lot for all that man. This would be my 3rd android phone to flash, so I feel pretty confident. But this one just seemed to have a lot more different ways to go about things then previous phones.
So I appreciate you breaking it down for me.
No prob...if you get stuck p.m.me and I'll give more in depth directions but the most important thing is to be patient...it can take 15-20 mins while your phone is loading so don't pull the batt and start over unless you have waited that long..good luck! Once you get the hand if it, its not that hard and our phones are pretty brick proof...I'm sure not completely, but this isn't your first rodeo so if you get into trouble read read read especially the stickies and when in doubt send me a p.m.
Sent from my SCH-I500 using XDA App
efan450 said:
No prob...if you get stuck p.m.me and I'll give more in depth directions but the most important thing is to be patient...it can take 15-20 mins while your phone is loading so don't pull the batt and start over unless you have waited that long..good luck! Once you get the hand if it, its not that hard and our phones are pretty brick proof...I'm sure not completely, but this isn't your first rodeo so if you get into trouble read read read especially the stickies and when in doubt send me a p.m.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Ok cool thanks again and will do. Its actually the wifes phone so I won't be doing it for a couple days probably as shes busy and needs it. I was going to do it last night but kind of got overwhelmed with all the info.
Related
****THIS POST IS NOT FOR BEGINNERS*****READ COMPLETELY BEFORE PROCEEDING*********************************************************************
I had to do this because I had flashed wrong thing in ODIN, and I had NO other choice....I did not do this by choice but this REALLY WORKS and I THINK ITS GREAT I was taking a RISK and I understood the consequences....I Could have ended up with a BRICKED PHONE, but that was not to be. I am VERY VERY happy with the results.
I WANT TO SAY THAT ALOT OF THE MATERIAL IN THIS POST WAS USED FROM LINKS AND POSTS FROM XDA WEBSITE THEY ARE A GREAT FORUM AND ANYONE DOING THIS SHOULD BECOME A MEMBER OF "XDA" AND "MOD A DROID"....THANK YOU XDA AND ALL THE DEV'S FOR ALL YOUR WORK ALL THE MATERIAL IN THIS POST I WILL PUT LINKS TO PAGES AT THE BOTTOM FROM PAGES USED "BUT I HAVE CHANGED SOME OF THE STEPS SO FOLLOW THIS POSTS INSTRUCTIONS ON HOW TO DO THIS PROCEDURE"....TO FASCINATE YOUR MESMERIZE.
******************************READ ENTIRE POST BEFORE YOU DO ANYTHING TO YOUR PHONE********************************************************
******************************READ ENTIRE POST BEFORE YOU DO ANYTHING TO YOUR PHONE********************************************************
******************************READ ENTIRE POST BEFORE YOU DO ANYTHING TO YOUR PHONE********************************************************
First -You NEED to download everything and have it on your PC ready to use !!! DO NOT START WITHOUT DOING THIS.
Second -You NEED to backup your contacts. DO NOT USE MY CONTACTS BACKUP !!! You will not have that app yet so there is no way to restore them. I used an app. called LOOKOUT from the market. You have to install on phone and sign-up on LOOKOUTS web sight and make sure you run a backup of contacts, as well you need to move any apps you want to your PC or SD card. I recommend the PC to leave space on SD Card....Have at least 1GB free on card to be plenty safe.
Ok heres the deal this may or may not be something you will want to do to your phone....DO THIS AT YOUR OWN RISK....This is what I did to turn my phone into a Fascinate even though I was a US Cellular Mesmerize. I WARN THIS WORKS BUT THERE ARE PROS AND CONS TO DOING THIS. To date there is NO, I REPEAT NO WAY to date to go back from this procedure to a MESMERIZE. Someone may have a way but I have not seen or found it yet. I do believe it is only a matter of time before the DEV'S come up with a restore and then you could go back to stock. SUMMARY= THERE IS NO WAY TO DATE TO REVERSE THIS PROCEDURE !!! DO AT OWN RISK !!!
First thing you need to do is download ROM MANAGER from the market and put the App on the SD Card for later install. Next Download this file here>>>>
http://dl.dropbox.com/u/458252/Fascinate Files/update.zip ---- to the ROOT of your SD Card it is a file called "UPDATE.ZIP" "DO NOT RENAME" put that on there and do not remove it you need it do a restore to access Clockwork later. This is where you need to have this located on SD. ---- /sdcard/update.zip.
Second you need to download...DI01 update with root and busybox here>>>>http://www.megaupload.com/?d=S7IFCKX0
Important:"DO NOT RENAME" and DO NOT put this on the root of your sdcard as /sdcard/update.zip. That's where clockwork mod lives. PUT IN FOLDER you name what ever on SD Card. You will need to go here later in the post to install this in step#12
/sdcard/"FOLDER YOU NAME"/update.zip.
Next thing you need the samsung drivers for windows for this to work. Those can be found on this thread: http://forum.xda-developers.com/showthread.php?t=779238 [this page has a good write up on how to down load and install.] or direct link BELOW>>>> Thank you DIRRK XDA member.
Download and Install Samsung Drivers to your WINDOWS PC this whole procedure was done on a WINDOWS 7 PC. WARNING: You need different drivers for mac/Linux and I do not know where to get them as I have only a WINDOWS PC.
64bit:
http://www.wikifilez.com/root files/epic4g/usb_drivers_GalaxyS_x64.zip
32bit:
http://www.wikifilez.com/root files/epic4g/SAMSUNG_USB_Driver_for_Mobile_Phones_x86.exe
*************************AFTER THIS POINT THERE IS NO WAY TO GO BACK PROCEED WITH CAUTION !!! ************************************************
For this next step THANK YOU FALLINGUP SENIOR MEMBER XDA....I have altered his orig. post to give more detail for people, using ODIN please follow my post to do this !!
****************************FROM HERE ON ONLY FOLLOW INSTRUCTIONS IN THIS POST TO DO THIS***************************************************
****************************FROM HERE ON ONLY FOLLOW INSTRUCTIONS IN THIS POST TO DO THIS***************************************************
****************************FROM HERE ON ONLY FOLLOW INSTRUCTIONS IN THIS POST TO DO THIS***************************************************
**************************GET ODIN AND ALL FILES NEEDED BEFORE PROCEEDING DOWNLOAD TO PC FOR USE*********************************************
LINKS ATTACHED TO FILES BELOW.
Next download ODIN and run. Make sure ODIN sees your phone by putting phone in DOWNLOAD MODE by pulling battery LEAVE OUT. Run ODIN. HOLD VOL DOWN AND PLUG INTO PC with cable that came with phone, a yellow rectangle with id# means ODIN sees it----once this is connected DO NOT UNPLUG UNTIL ODIN IS FINISHED. If you do you will see a PC connected to a phone by a triangle this means you prematurely unplugged and you will need to re-flash whichever step failed to flash. It is only OK to unplug once a step is finished and Odin says reset in blue, but you do not need to you can load the next file and go. But I've got steps below so if you are here you didn't read entire post. CAREFUL Now follow step 4.1
ONLY FLASH ONE OF THESE AT A TIME. START WITH THE /SYSTEM ODIN AND WORK YOUR WAY DOWN THE LIST.---You do not just flash the pit file it is used with the other files like system,kernel,and recovery. ****FILES BELOW STEPS****READ ENTIRE POST BEFORE USING ODIN AND KNOW THE RISKS*************************************
************************ONCE YOU FLASH ANYTHING YOU CAN NOT GO BACK YOU WILL BRICK YOUR PHONE**********************************************
************************ONCE YOU FLASH ANYTHING YOU CAN NOT GO BACK YOU WILL BRICK YOUR PHONE**********************************************
Steps:
1. Pull battery from device
2. Open Odin on desktop
3. Hold volume down button and plug device into computer-This will place the device into download mode
4. Verify device shows up in Odin ---This should be a yellow rectangle with id #----As well the phone will also say download mode with a yellow triangle on it
4.1: Select PIT button
4.2: Select PIT file downloaded from this post and load it into Odin. (I Never loaded the pit file when I did this in Odin and worked fine for me but from what I understand it is good practice to do so to Quote a post ---"You need to load the pit file into Odin---Missing these steps usually results in major FC hell issues." Thanks PHOENIXPATH senior member XDA
4.1: To Flash the "Stock-i500-VZW-System.tar.md5" file you,
5. Click "PDA" button in Odin ---MAKE SURE YOU ONLY USE PDA "DO NOT USE PHONE" YOU HAVE BEEN WARNED!!
6. Select "Stock-i500-VZW-System.tar.md5" from where you downloaded it
7. Click "Start" This will reboot your phone when complete. This flashes both the kernel and the recovery partition to enable you to flash update.zips signed with test keys. ---When done ODIN should say reset leave pit alone and load next file of the three needed to be flashed.(YOU MAY NEED TO UNPLUG and REDO STEPS 1-4 AGAIN)and jump/proceed to step#8 and continue on.
8. Flash "Stock-i500-VZW-Kernel.tar.md5" when done says reset move to next step.
8.1 Flash "Stock-i500-VZW-Recovery.tar.md5" when done says reset move to next step.
9. Flash "CWMrecovery.tar" ----THANK YOU JT1134 Senior member XDA
10. Replace the battery and Boot in to Recovery= HOLD VOL UP + VOL DOWN same time and PRESS POWER, all three need to be pushed to enter recovery.
11. In recovery navigate UP=vol. up/ DOWN=vol. down /ENTER=home key----You need to select "apply sdcard:UPDATE.ZIP" on ROOT of SD Card to enter the next recovery screen.
12.In this recovery "CLOCKWORK RECOVERY" navigation is different UP/DOWN=SAME but ENTER=power key---you need to navigate to the "ADVANCED" and then apply "WIPE DALVIK CACHE" when done select "REBOOT RECOVERY" (brings you to stock recovery) navigate to "WIPE DATA/FACTORY RESET" once done go to "APPLY SDCARD UPDATE.ZIP" then "INSTALL ZIP FROM SD CARD" once there select "CHOOSE ZIP FROM SD CARD" navigate to the folder "YOU GAVE A NAME TO" and inside is the 2nd "UPDATE.ZIP" you put there and select it...wait until it is finnished...once done.."GO BACK"and"GO BACK AGAIN" then select "REBOOT SYSTEM NOW"
13. Enjoy your stock Fascinate phone with DI01 update and root and busybox . You still will have phone call ability but a couple of apps like contacts backup and vcast are "Verizon" and we at US Cellular can not use. But once you install custom ROMS in Rom Manager you will be able to get roms with them removed or get apps to shut down/freeze them and sub. them out.
Alot of the ROMS have apps taken from the MESMERIZE so this is not really an issue at least not to me.
INSTALL ROM MANAGER FROM SD CARD OR LOAD TO PHONE FROM PC AND INSTALL ON PHONE......
NOW GO INTO ROM MANAGER AND "BACKUP CURRENT ROM" so any changes made from here you can get back to this point.....once done you can NOW LOAD CUSTOM ROMS,KERNELS AND ENJOY THE HELL OUT OF YOUR "FASCINATED-MESMERIZE"
Buy the latest PRO version of ROM MANAGER and use to upgrade kernels thru clockwork or load roms in rom manager......
These are the files to put in ODIN PDA Flashing one at a time with the PIT file. ONLY USE PIT AND PDA......You have been warned again. PS-NEVER DUMP IN ODIN,and do not check anything but PDA AND PIT...there are things checked in ODIN when it loads leave them alone.
Download: "To PC for use in ODIN before you begin"
Odin: http://dl.dropbox.com/u/458252/Odin Files/Odin3 v1.3.exe -This is program to use to flash.
Odin Restore file for system: http://dl.dropbox.com/u/458252/Odin Files/Stock-i500-VZW-System.tar.md5 -----THIS IS FIRST.
Odin Restore file for kernel: http://dl.dropbox.com/u/458252/Odin Files/Stock-i500-VZW-Kernel.tar.md5 -----THIS IS SECOND.
Odin Restore file for recovery: http://dl.dropbox.com/u/458252/Odin Files/Stock-i500-VZW-Recovery.tar.md5 ----THIS IS THIRD.---this is just to be safe
Odin Clockwork recovery file: http://dl.dropbox.com/u/458252/CWMrecovery.tar ------THIS IS FOURTH ONE I FLASHED.
PIT file for use in Odin Restores: http://dl.dropbox.com/u/458252/Odin Files/Stock-i500-VZW-pit.pit ----THIS IS PIT TO USE "WITH" ABOVE FILES.
*************************THANK YOU TO XDA WITHOUT YOU THIS WOULD NOT BE POSSIBLE**********************************************************
LINKS REFERENCED FROM XDA's WEBSITE THANK YOU AGAIN XDA MEMBERS !!! YOU GUYS ROCK !!!
http://forum.xda-developers.com/forumdisplay.php?f=721
http://forum.xda-developers.com/showthread.php?t=782204
http://forum.xda-developers.com/showthread.php?t=790004
http://forum.xda-developers.com/showthread.php?t=790085
http://forum.xda-developers.com/showthread.php?t=779238
http://forum.xda-developers.com/showthread.php?t=789868
http://forum.xda-developers.com/showthread.php?t=788099
IF YOU LIKE THIS LEAVE ME SOME FEED BACK PLEASE.....................THANKS AND ENJOY........ANDROIDMAN
EXTRA NOTE: DO NOT TRY THIS WITH ANYTHING OTHER THAN THE SCH I-500 MESMERIZE......AS IT HAS ONLY BEEN DONE ON THAT MODEL..........
FLASHING ANY OTHER GALAXY S VARIANTS ODIN FILES WILL BRICK YOUR PHONE !!!!!!!!!
How odd.
Why would you want to make your phone a fascinate? Most of us went the other way in order to debing.
Sent from my SCH-I500
lowkee said:
How odd.
Why would you want to make your phone a fascinate? Most of us went the other way in order to debing.
Sent from my SCH-I500
Click to expand...
Click to collapse
Because There is no way mainstream to use clockwork or rom manager. Hense you can only root, thats it without this.
lowkee said:
How odd.
Why would you want to make your phone a fascinate? Most of us went the other way in order to debing.
Sent from my SCH-I500
Click to expand...
Click to collapse
My thoughts exactly?! I thought people that had a fascinate were wishing it wasn't so fascinatish?
Whatever floats your boat I guess.
JT
danrosinski said:
Because There is no way mainstream to use clockwork or rom manager. Hense you can only root, thats it without this.
Click to expand...
Click to collapse
Correct, No Way of FLashing ROM MANAGER so you can apply the first update.zip
You Can Flash but when you apply the update to a MESMERIZE you get E:signature verify fail -hence No Clockwork, NO Roms. No Way to Customize
jtsharps said:
My thoughts exactly?! I thought people that had a fascinate were wishing it wasn't so fascinatish?
Whatever floats your boat I guess.
JT
Click to expand...
Click to collapse
When I orig. did this I had No Choice, This is something that I had to do...and Thankfully Worked just thought I would Share because now I can Use CLOCKWORKMOD and ROM MANAGER and customize my phone as if it were a Fasinate.
lowkee said:
How odd.
Why would you want to make your phone a fascinate? Most of us went the other way in order to debing.
Sent from my SCH-I500
Click to expand...
Click to collapse
Did you read the entire post I had NO choice as stated in the beginning....Thank You.
Can't link it now but doesn't Koush have a post on compiling Clockwork for new phones?
Sent from my Voodoo-powered Fascinate with XDA
s44 said:
Can't link it now but doesn't Koush have a post on compiling Clockwork for new phones?
Sent from my Voodoo-powered Fascinate with XDA
Click to expand...
Click to collapse
If he dose I havent seen it can you throw that up for everyone?
androidman78 said:
If he dose I havent seen it can you throw that up for everyone?
Click to expand...
Click to collapse
Now I'm home, so here's the post.
Awesome job. Glad you got it working. Now all we need its a way to reverse these steps so us fascinate users can go to 'stock' mesmerize.
(...or better yet, stock android...)
Sent from my stupidfast blackish hole...
What are the other possible applications for this?
PhoenixPath said:
Awesome job. Glad you got it working. Now all we need its a way to reverse these steps so us fascinate users can go to 'stock' mesmerize.
(...or better yet, stock android...)
Sent from my stupidfast blackish hole...
Click to expand...
Click to collapse
Yea, was worried origionally that I was screwed but its a draw/Im happy its only a matter of time before the Fasinate users will be able to go stock mesmerize because this SHOULD?see no reason why not, go both ways.
I know that Sprint is doing an I-500 can we go there too, at least for apps and features. I wonder? And what about the 4G...USC and VZW are 3G would switching/Moding give any advantages I think NOT but still wonder how much of that speed is controled by phone software. I really think its all the network but not 100% sure.
Post above looks interesting the one for Koush's site am checking it out now....Thanks
Sent from my Stupid Fast Blackhole of a Fasinated-Mesmerize
Just need the odin files for the mesmerize.
Sent from my stupidfast blackish hole...
PhoenixPath said:
Just need the odin files for the mesmerize.
Sent from my stupidfast blackish hole...
Click to expand...
Click to collapse
Got any open space to host?
It's called dropbox.
PhoenixPath said:
It's called dropbox.
Click to expand...
Click to collapse
3 hours to upload that small of a file... Dropbox blows for something like that. We'll see.
So i have clockwork working on my mesmerize and running jts super clean but does this allow you to use all facinate roms and kernels on the mesmerize? if so i wanna try this
so if i did this and i used clockwork to perform a backup before i did this could i possibly just restore that backup and have it be a mesmerize again?
and it was said there are pros and cons of doing this? the pros are great but what are the cons besides not being able to go back to stock mesmerize????
tweakymattman said:
and it was said there are pros and cons of doing this? the pros are great but what are the cons besides not being able to go back to stock mesmerize????
Click to expand...
Click to collapse
I can't get mms working....
Sent from my SCH-I500 using Tapatalk
This makes about 100 times more sense.
http://androidforums.com/behold-2-all-things-root/54424-creating-custom-roms-backups-odin.html
I partitioned my SD card using ROM Manager, turned the phone off and got a black screen with lit keys. So, I read around and was told to use ODIN to reflash the stock TMO build, so I did. Now, Im getting the TMO logo and Galaxy S screen, but I get a black screen still.
I cannot get into download mode. I vol - and power and I get the Vibrant logo, then it goes back off. Even when plugged it, I get the batt charging animation, then back to the Vibrant screen.
I tried to push the update.zip to the SD card through ADB, but I get a permission denied message, meaning the root was killed.
So, is this phone pretty much screwed? I cant think of any other way to get it going outside of moving the update.zip to the sd card by a 3rd party measure i.e card reader/another phone
dude that's not even close to a brick as the phone is still responsive somehow..
do this:
1. pull out battery wait 5-10secs
2. connect USB to computer and phone
3. hold down the vol +/- buttons
4. plug in battery
5. you should be in download mode now
6. do what you gotta do with ODIN
good luck
Dont use that method to get to DL mode . Do it this way . First turn off your phone , then plug the usb cable into your computer ONLY . Next hold both volume buttons and plug the micro usb into your phone . Also use odin v1.3 and flash the rom of your preference .
Edit : xtone beat me to the punch
trill12 said:
I partitioned my SD card using ROM Manager, turned the phone off and got a black screen with lit keys. So, I read around and was told to use ODIN to reflash the stock TMO build, so I did. Now, Im getting the TMO logo and Galaxy S screen, but I get a black screen still.
I cannot get into download mode. I vol - and power and I get the Vibrant logo, then it goes back off. Even when plugged it, I get the batt charging animation, then back to the Vibrant screen.
I tried to push the update.zip to the SD card through ADB, but I get a permission denied message, meaning the root was killed.
So, is this phone pretty much screwed? I cant think of any other way to get it going outside of moving the update.zip to the sd card by a 3rd party measure i.e card reader/another phone
Click to expand...
Click to collapse
Yes using ROM Manager to repartition your phone will create the "soft-brick" you are experiencing. But as one person has already noted, this can pretty much be recovered using ODIN.
Definitely follow the advice given in Posts 2 and 3 of this thread to get into Download mode. If you're not getting the desired results using ODIN, what settings are you using? For example, what are the names of the .pit and .tar files you are using? Did you check or leave unchecked the "re-partition" option?
Sorry for the noobery. Im usually good at this.
Well, I was able to get into download mode and get ODIN to run, but im getting a MBD checksum error when I boot into recovery.
And I cannot install CWM through the market because my Application Storage is at 0.00B for some reason.
trill12 said:
Sorry for the noobery. Im usually good at this.
Well, I was able to get into download mode and get ODIN to run, but im getting a MBD checksum error when I boot into recovery.
And I cannot install CWM through the market because my Application Storage is at 0.00B for some reason.
Click to expand...
Click to collapse
What ROM did you flash. You might want to perform a factory reset and then flash the stock JFD ROM and see if that fixes your problem.
Good luck.
Oh this is a nightmare.... exactly what happened to me.
I'll be honest, I tried and tried and tried all sorts of stuff and somehow I got it back reading again.
I would ODIN to Eugenes Froyo that doesn't brick and see where that gets you. Thread is in developers section and I am pretty sure that's what got me back working but follow ALL the instructions. With no application room I couldn't push, unistall, install ect...
blizzard1017 said:
Oh this is a nightmare.... exactly what happened to me.
I'll be honest, I tried and tried and tried all sorts of stuff and somehow I got it back reading again.
I would ODIN to Eugenes Froyo that doesn't brick and see where that gets you. Thread is in developers section and I am pretty sure that's what got me back working but follow ALL the instructions. With no application room I couldn't push, unistall, install ect...
Click to expand...
Click to collapse
That's only needed if he flashed a rom with the wrong kernel or if he flashed a rom without disabling voodoo .
Sent from my SGH-T959 using XDA App
Just get to DL mode as xtone and I stated in post 2 & 3 . Then flashed to JFD with odin v1.3 and click the repartition box in odin and you'll be fine .
Sent from my SGH-T959 using XDA App
I had this problem for the last two days, but I found a way to fix it thanks to a user (whom I don't know the name of)
I did this to go back to stock firmware (JFD), make sure you have that downloaded.
Look for Eugene's Galaxy S Froyo PDA, for the i9000, not the Vibrant. Flash it through Odin with the 512 pit file. It's not going to boot up but take you to recovery mode instead, and it's going to remap your Volume buttons, but you can still get into DL mode (up is now down, and vice versa but whatever)
Now Odin back to stock, using the same 512 pit and there you go! Should boot up with no problem. Now you can redo everything, but remember to never partition through ROM Manager ever again!
Sent from my SGH-T959 using XDA App
Is there a link you could provide him?
AgentFour20 said:
That's only needed if he flashed a rom with the wrong kernel or if he flashed a rom without disabling voodoo .
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
His exact symptoms happened to me when the noob in me decided to repartition in Rom Manager awhile back. I am just suggesting he uses this tool as an option. It's definitely a good tool to use regardless of how he got where he got.
something like this happened to a buddy of mine, i'm trying to fix it, but the guy was completely stock so it makes no sense... I've tried everything, and i cant seem to find eugenes files...
Mr.Duck said:
something like this happened to a buddy of mine, i'm trying to fix it, but the guy was completely stock so it makes no sense... I've tried everything, and i cant seem to find eugenes files...
Click to expand...
Click to collapse
Eugenes rom are on his new site www.eb-production.proboards.com
Sent from my SGH-T959 using XDA App
OK, I got it fixed. Heres how.
I was finally able to get into ODIN and flash Eugenes Froyo.
So, from there, I was getting an MD5 checksum error when Id try to get into recovery, and I couldnt install the ROM Manager from the Market
Well, upon inspection of a the Nero V3 build I had downloaded, there was a ROMManager.apk there. So I pushed it onto my phone, reflashed to CWR (had to do it about 3 times) and reinstalled Nero V3.
After installing the build, I was able to re-enable voodoo and its theres no more MD5 craziness when I access the Recovery
trill12 said:
OK, I got it fixed. Heres how.
I was finally able to get into ODIN and flash Eugenes Froyo.
So, from there, I was getting an MD5 checksum error when Id try to get into recovery, and I couldnt install the ROM Manager from the Market
Well, upon inspection of a the Nero V3 build I had downloaded, there was a ROMManager.apk there. So I pushed it onto my phone, reflashed to CWR (had to do it about 3 times) and reinstalled Nero V3.
After installing the build, I was able to re-enable voodoo and its theres no more MD5 craziness when I access the Recovery
Click to expand...
Click to collapse
So voodoo was the culprit . lmao
I dont remember you ever mentioning that . Any way glad you figured it out and have your phone back .
AgentFour20 said:
So voodoo was the culprit . lmao
I dont remember you ever mentioning that . Any way glad you figured it out and have your phone back .
Click to expand...
Click to collapse
Apparently. Completely forgot I attempted to enable it. I was freaked all the way out trying to repair the damn thing.
Ok So im a noob to all of this . I have root 2 of 3 phones both samsung . I rooted them both using adb cmd lines on my pc. I have also seen one click . and odin methods. I have not yet installed clockworkmod. Not sure what version to install ? my phones are all edo4 froyo 2.2. Not sure what roms are good ? etc... still reading up . Anyway my question is which method is the most up to date and considered the best way to root ? Also what is considered the best way to lagfix ? Still learning about all the roms and kernels . Im like a 3 day old noob to all this. So keep it simple for the stupid guy
screamin4 said:
Ok So im a noob to all of this . I have root 2 of 3 phones both samsung . I rooted them both using adb cmd lines on my pc. I have also seen one click . and odin methods. I have not yet installed clockworkmod. Not sure what version to install ? my phones are all edo4 froyo 2.2. Not sure what roms are good ? etc... still reading up . Anyway my question is which method is the most up to date and considered the best way to root ? Also what is considered the best way to lagfix ? Still learning about all the roms and kernels . Im like a 3 day old noob to all this. So keep it simple for the stupid guy
Click to expand...
Click to collapse
Do you want to root and stay stock or do you want to flash a custom rom as well? And are you familiar with odin and how to use it?
Have never used odin. I would like to flash a nice clean rom of some sort eventually when i figure out what all the diffrences are. Also have not installed Clockworkmod.
Here is a quick guide to rooting if you are still running ED01:
http://forum.xda-developers.com/showthread.php?t=1046855
As for a stable and clean rom, I would suggest the Community rom found here:
http://forum.xda-developers.com/showthread.php?t=1108991
and if you are not on ED01 and don't mind losing installed apps, you can skip the rooting process and install the commmunity rom zip from clockwork mod just by flashing over clockwork recovery. Make a backup in clockwork recovery before you install any rom though, this will save you a very large headache of going back to stock and having to update all over again should anything go wrong.
there is one major thing to always pay attention to:
ONLY use the PDA button in Odin, NEVER use the Phone button (this will brick your phone)
Also not afriad to do the research and learn to use odin . Especially if this is considred to be the best method for rooting and installing roms and kernels. Does the fact that I have used ADB method affect usining odin. Do I need to Unroot my device and start fresh? and anything special I should know about Clockworkmod?
screamin4 said:
Have never used odin. I would like to flash a nice clean rom of some sort eventually when i figure out what all the diffrences are. Also have not installed Clockworkmod.
Click to expand...
Click to collapse
Well, here is Odin: http://www.mediafire.com/download.php?429fcpdtpckkcea download and install on your PC. Once you have done that, download this: http://www.mediafire.com/file/06al8prkgj29gps/cwm-recovery-ALL-3-30-FIX.tar to your PC and remember where you put it.
I suggest community rom for you but you are welcome to choose something else. Download this and put it on the root or base of your SD card. Here is the link: http://www1021.megaupload.com/files/2f6ba494eabf66de4d3888ed8fcd3f20/UKB_2_pbj50_fixed.zip This has a slightly undervolted kernel so it will give you better battery life.
Once you have done all of that, power off your phone and take the battery out. Hold the volume down button and at the same time plug your phone into your PC. This should put you into download mode on the phone. Open odin on the PC and Hit the "PDA" button. ONLY THE PDA BUTTON FOR THIS!!! Then find the cwm 3-30-fix all tar and select it. Then hit start. When it finishes you will see a green "PASS", unplug the phone and put battery in. Hold down the volume up and down buttons and the power buttons ALL at the same time and hold them until you see the samsung symbol. Then navigate to wipe data/factory reset and hit the power button. This will wipe your data. Make sure to save your phone numbers first. Then go to install zip from SD card and then choose zip from SD card and then find community rom and then hit the power button. Let it flash and then hit the menu button and you will go back to the main cwm recovery menu. Select "reboot now". The phone will boot and you will be running rooted community rom with an undervolted kernel. ENJOY
Ok cool . so im still wondering if the method I used should be reversed . Was it a bad method ? Just trying to learn and understand as much about rooting as possible.
to go back to stock is super easy.
Odin the stock rom and reboot DONE!
Link to Stock ROM plus How Too!
http://forum.xda-developers.com/showthread.php?t=908451
I love this phone it is REALLLLLY hard to brick.
Basically as long as you DON'T flash a rom, kernel, or Modem from another phone and you will be good!
Good luck and enjoy the phone
I believe my rom is currently stock . Im not asking how to root or install the roms. just which is the prefered method and should I revert the root method I have used and start over.
Sorry to hijack but this touches on what I'm dealing with now. I had to end up odin back to stock I did the ota back to 2.2. Can use this method to get to ComRom2.2?
bsannes said:
Sorry to hijack but this touches on what I'm dealing with now. I had to end up odin back to stock I did the ota back to 2.2. Can use this method to get to ComRom2.2?
Click to expand...
Click to collapse
If you are stock now you can use the method I posted earlier.
Sent from my SCH-I500 using XDA Premium App
screamin4 said:
Ok cool . so im still wondering if the method I used should be reversed . Was it a bad method ? Just trying to learn and understand as much about rooting as possible.
Click to expand...
Click to collapse
Don't even know what method you used but if you are rooted then no need to unroot. Just Odin cwm recovery and then boot immediately into the recovery and wipe and then flash whatever rom you have already put on your SD card.
Sent from my SCH-I500 using XDA Premium App
I Used ADB application on PC and copy and pasted each command line with the phone hooked up on USB. check this link. http://wiki.cyanogenmod.com/index.php?title=Samsung_Fascinate:_Rooting
Does anyone know the diffrences between this method. Odin and . One click methods ?
screamin4 said:
I Used ADB application on PC and copy and pasted each command line with the phone hooked up on USB. check this link. http://wiki.cyanogenmod.com/index.php?title=Samsung_Fascinate:_Rooting
Does anyone know the diffrences between this method. Odin and . One click methods ?
Click to expand...
Click to collapse
No differences really. Just different methods of pushing the necessary files to your phone to give you root access. If you do in fact have root access, then you don't need to unroot. One method is just as good as another. Start doing some research on custom roms and kernels. You change those via clockworkmod recovery.
Soo....I kinda f*cked up my phone. I had Bi-Winning for a while and got bored of it, so I decided to flash another rom. I had it for about 2 hours and decided, I wanna flash another one! I went back in my history and this is terrible, but I cannot remember for the life of me which rom I used. It was either Simply Honey, Crazy 8, or MIUI. I honestly can't remember. Anyway, after that I used ROM Manager to flash Biffmod from my SD Card and after it did that, it went into a bootloop. So I tried to get back into Download mode, but it just kept going to the Vibrant screen. THEN, I tried to use Odin without being in Download mode and I didn't realize the TAR file wasn't completely downloaded, ran Odin and it made it even worse. Now every time I try to use the various methods of getting into Download mode, I come across the screen in the attached photo. It's a weird version of CWM Recovery, it says. v2.5.1.0 SOK ULFK. I cannot get passed this screen and into Download mode no matter what I do. HELP!
It also can't mount my SD card.
Saved me every time & I down load it to my HD.
http://www.youtube.com/watch?v=9nMCBbdAcHU
Saved me every time & I down load it to my HD.
Keep us posted.
serendipityguy said:
http://www.youtube.com/watch?v=9nMCBbdAcHU
Saved me every time & I down load it to my HD.
Keep us posted.
Click to expand...
Click to collapse
If it doesn't work the first time don't panic, sometimes it takes me a couple of times to get it to work. If you still can't get into download mode I see a JIG in your future...
http://goo.gl/CFnVU
Same thing happened. The battery icon screen flashes and then it goes to this weird CWM. What the eff did I do to my phone?
Why not flash a froyo rom like bionix or project v from the recovery menu.
Another thing - When I try to use CWM to reboot into Download mode, the screen Galaxy S GT I9000 pops up and goes back to CWM. I have the Vibrant, and I'm pretty sure those are two somewhat different phones...Why is mine confused?
mattb3 said:
Why not flash a froyo rom like bionix or project v from the recovery menu.
Click to expand...
Click to collapse
Well I assume I'd need to actually have the rom to be able to flash it. And when I try to install zip from SD it's unable to mount the SD card.
Someone please help me, I am getting extremely desperate here.
Generally the Galaxy S GT I9000 screen comes up if you have the Gingerbread bootloader flashed. GB Bootloaders don't use the 3 button combo for Download Mode, all you have to do is press and hold Volume Up + Power.
If that doesn't work try flashing a GB ROM. Sadly there's really no way to tell what file system the phone is using in CMW at least not in the version I have, if you can find out that would help a lot though. Since we don't know what file system it's using I'd recommend using a non-CM7/MIUI rom first. Download one of the non-CM7/MIUI GB roms. Plug the phone into your computer and in CMW go to Mounts and Storage and Mount USB Storage. You should then be able to copy the ROM onto your phone and flash it.
I had problem getting to download mode after flashing ported gt I9000 rom .hold down or up, power and home " button" (one puts in recovery the other in download can't remember which)
Sent from my SGH-T959 using XDA Premium App
THANK YOU!!!!!!!!
boundless316 said:
Generally the Galaxy S GT I9000 screen comes up if you have the Gingerbread bootloader flashed. GB Bootloaders don't use the 3 button combo for Download Mode, all you have to do is press and hold Volume Up + Power.
If that doesn't work try flashing a GB ROM. Sadly there's really no way to tell what file system the phone is using in CMW at least not in the version I have, if you can find out that would help a lot though. Since we don't know what file system it's using I'd recommend using a non-CM7/MIUI rom first. Download one of the non-CM7/MIUI GB roms. Plug the phone into your computer and in CMW go to Mounts and Storage and Mount USB Storage. You should then be able to copy the ROM onto your phone and flash it.
Click to expand...
Click to collapse
THANK YOUUUU!!! Oh my goodness. I JUST bought a jig with my gf's card and then I came back to this thread and saw this. Tried it, it worked. Now hopefully I can do the rest without a problem. Thank you again for getting me into download mode.
Word. Glad I could help. The important thing to remember is the Vibrant is a pretty robust phone. It's damn near impossible to brick it so bad you can't recover, so there's rarely any reason to panic. And hey, now you have a JIG on the way just in case you get into some real trouble down the line.
boundless316 said:
Word. Glad I could help. The important thing to remember is the Vibrant is a pretty robust phone. It's damn near impossible to brick it so bad you can't recover, so there's rarely any reason to panic. And hey, now you have a JIG on the way just in case you get into some real trouble down the line.
Click to expand...
Click to collapse
Actually I have one little problem, I am unable to get to CWM Recovery it says there is no update.zip/ "No such file or directory". I need to get going so I'll just leave it as stock 2.1 right now.
Also it's still starting up with the GT I9000 thingy and I just want it back to normal! Haha anyway. Thanks again.
Download the AIO Toolbox, use it to Odin back to stock (the appropriate PIT and PDA files are included with the install), root the phone (again using the AIO Toolbox) and then install ROM Manager and use it to flash CWM.
boundless316 said:
Download the AIO Toolbox, use it to Odin back to stock (the appropriate PIT and PDA files are included with the install), root the phone (again using the AIO Toolbox) and then install ROM Manager and use it to flash CWM.
Click to expand...
Click to collapse
You seriously deserve some sort of medal. Thank you so much for taking the time to help me out.
Hey there,
I'm trying to get CyanogenMod on my friend's aging Vibrant. I first rooted, and then I attempted to install ClockworkMod through the stock recovery. At first it just restarted back to the stock recovery, so I installed it again, and boom- CWM. From there, I wiped, went to mount USB storage, and the drive didn't show up on my computer. I figured it needed to be rebooted, so I tried that. This time, it reverted BACK to stock recovery. I figured, okay, all I have to do is flash CWM again. It won't work anymore. I don't know what to do, because I can't flash CWM, a Rom, or even restore the original rom because I can't get into CWM.
Please help!
vindication84 said:
Hey there,
I'm trying to get CyanogenMod on my friend's aging Vibrant. I first rooted, and then I attempted to install ClockworkMod through the stock recovery. At first it just restarted back to the stock recovery, so I installed it again, and boom- CWM. From there, I wiped, went to mount USB storage, and the drive didn't show up on my computer. I figured it needed to be rebooted, so I tried that. This time, it reverted BACK to stock recovery. I figured, okay, all I have to do is flash CWM again. It won't work anymore. I don't know what to do, because I can't flash CWM, a Rom, or even restore the original rom because I can't get into CWM.
Please help!
Click to expand...
Click to collapse
Okay, I've never had this issue personally, nor have I read of anyone else having a similar issue. However, despite the lack of CWR, you can still restore the device back to stock via Odin. There is a guide on the usage of Odin that can be found here. Download links to the program along with the required .pit and .tar files can also be found in said guide. Once you've got the device restored, you can go through the process of installing CyanogenMod... But, keep in mind that the installation process is going to vary slightly depending on what version of CyanogenMod you wish to install. Are you trying to install CyanogenMod 7 (Gingerbread), 9 (Ice Cream Sandwich), 10 (Jellybean 4.1), or 10.1 (Jellybean 4.2)?
I know about Odin, but I'm on a Mac right now. I was really hoping there was a way around this so I didn't have to install Windows via Boot Camp. I'm planning on installing CM10.
vindication84 said:
I know about Odin, but I'm on a Mac right now. I was really hoping there was a way around this so I didn't have to install Windows via Boot Camp. I'm planning on installing CM10.
Click to expand...
Click to collapse
You could use Heimdall, an alternative to Odin that is compatible with OS X. You can download it here.
Now, in regards to the process of installing CM10, you could refer to this video... http://forum.xda-developers.com/showthread.php?t=1812882. Hopefully you won't get that weird CWR issue this time around. Let me know how it goes. :fingers-crossed:
No matter what, I can't get Heimdall to detect the phone. It just says "Failed to detect compatible download-mode device".
vindication84 said:
No matter what, I can't get Heimdall to detect the phone. It just says "Failed to detect compatible download-mode device".
Click to expand...
Click to collapse
Hmm... Perhaps this post might be of some help? Sorry, but I don't own a Mac, nor have I ever personally used Heimdall... So I've never had that issue before. However, a little Google searching uncovered a bunch of threads discussing this exact error. Perhaps a little digging may uncover your answer? Link. Again, best of luck dude.
Can you get back into the stock recovery and transfer files to the internal SD? If so, you need to flash update.zip(attached). It will add a custom recovery. You may need to flash it twice to get it to show up. From there, I would suggest you do the following: 1) wipe user data, cache and davlik(under advanced) 2) reboot recovery, if the stock recovery comes back, just reflash update.zip. 3) Flash whichever ROM you want on the phone, again, may take two flashes.
If you cannot add files to the internal SD, this solution won't work, in which case you'll have to play around a little more. I would suggest, as an alternate method, that you pull the battery and SD card. replace the battery and try to enter download mode. Try using Heimdal One-Click(http://forum.xda-developers.com/showthread.php?t=1278683). It's much easier than using Heimdal or Odin and will flash the Vibrant to stock. View the download mode shortcut below.
Side note: hardware shortcuts help a lot. If you don't know them, they are here:
Hold volume up + volume down + power =
1. When off, boots recovery
2. When on, reboots into recovery
Hold volume up + volume down +plug in computer USB = download mode.
^This is what you use for Odin and/or Heimdal. They won't recognize the device unless it's in download mode.
May also take a few tries.
Let me know how it goes and if you have any questions.
EDIT: You may need to have the phone on the stock ROM to flash that update.zip. I ran into that problem and couldn't figure out why it wasn't working for a long time. Don't update the vibrant to stock 2.2 to use the update.zip.
danvsullivan said:
Can you get back into the stock recovery and transfer files to the internal SD? If so, you need to flash update.zip(attached). It will add a custom recovery. You may need to flash it twice to get it to show up. From there, I would suggest you do the following: 1) wipe user data, cache and davlik(under advanced) 2) reboot recovery, if the stock recovery comes back, just reflash update.zip. 3) Flash whichever ROM you want on the phone, again, may take two flashes.
If you cannot add files to the internal SD, this solution won't work, in which case you'll have to play around a little more. I would suggest, as an alternate method, that you pull the battery and SD card. replace the battery and try to enter download mode. Try using Heimdal One-Click(http://forum.xda-developers.com/showthread.php?t=1278683). It's much easier than using Heimdal or Odin and will flash the Vibrant to stock. View the download mode shortcut below.
Side note: hardware shortcuts help a lot. If you don't know them, they are here:
Hold volume up + volume down + power =
1. When off, boots recovery
2. When on, reboots into recovery
Hold volume up + volume down +plug in computer USB = download mode.
^This is what you use for Odin and/or Heimdal. They won't recognize the device unless it's in download mode.
May also take a few tries.
Let me know how it goes and if you have any questions.
EDIT: You may need to have the phone on the stock ROM to flash that update.zip. I ran into that problem and couldn't figure out why it wasn't working for a long time. Don't update the vibrant to stock 2.2 to use the update.zip.
Click to expand...
Click to collapse
I already have the update.zip on the phone. I can get into the stock recovery and flash it (it says "replacing recovery with Clockwork" and everything), but every time I attempt to flash it, the phone reboots to the stock recovery. I can't add files to the internal SD because the only options are Reboot System Now, Reinstall Packages, Delete All User Data, and Delete Cache Data"
One-Click doesn't see the phone either. I'm starting to get really worried. Is there some sort of driver or something I need to have installed on the system?
SOLVED!
Alright, I finally figured it out. I'm exhausted, haha.
I finally just bit the bullet and installed Windows. I used ODIN, which was such a breeze. I wish I would have just done that in the first place.
Thanks for your help guys!
vindication84 said:
Alright, I finally figured it out. I'm exhausted, haha.
I finally just bit the bullet and installed Windows. I used ODIN, which was such a breeze. I wish I would have just done that in the first place.
Thanks for your help guys!
Click to expand...
Click to collapse
Glad to hear the good news!
Hope this time you'll be able to update the phone seamlessly, and your friend can enjoy a newly updated Vibrant. If you ever have any questions, don't hesitate to PM me. I'll try my best to help you out.
danvsullivan said:
Try using Heimdal One-Click(http://forum.xda-developers.com/showthread.php?t=1278683).
Click to expand...
Click to collapse
Although I had heard of Bay_wolf's AIO Vibrant Toolbox, which is also a one-click software (but only compatible w/Windows), I had never heard of "Heimdal One-Click". This is good to know about, and I've added the program to the The Official XDA Vibrant Bible Thread. I learn something new every day. Thanks!
vindication84 said:
Alright, I finally figured it out. I'm exhausted, haha.
I finally just bit the bullet and installed Windows. I used ODIN, which was such a breeze. I wish I would have just done that in the first place.
Thanks for your help guys!
Click to expand...
Click to collapse
Great news! You can follow the instructions I wrote out to install a custom ROM from stock. Just put all the files on the internal SD, wipe everything and flash update.zip and then the ROM and gapps.
If you have questions, you may PM me as well.
Good luck!