[Q] how to install apps, get past security warning?. - Atrix 4G Q&A, Help & Troubleshooting

I've tried to install apps from 4shared onto my Atrix 4G but it doesn't let me.
I need to know if theres a way to get past the security warning?.

You have to enable sideloading.

You need to get the Sideload Wonder Machine from AndroidCentral.com to enable you to install from your computer.

Yep it's called sideloading, two options here:
A. Root your phone (use GingerBreak. You need to buy an external sd-card to make it happen) and find yourself the GladEnable script to enable sideloading. Done.
B. Flash the newest 4.5.91 build (gingerbread, AT&T only). Then you can find the much blessed "install non-market apps" checkbox. check it and you are done. here's a link to save you some time for searching the web: http://forum.xda-developers.com/showthread.php?t=1159950

Sideload Wonder Machine can be used without rooting your phone. It takes up too much time to troubleshoot so I didn't root mine this time. I have rooted my iPhone & another Droid previously & found it too time-consuming to keep up.

pummkin said:
Sideload Wonder Machine can be used without rooting your phone. It takes up too much time to troubleshoot so I didn't root mine this time. I have rooted my iPhone & another Droid previously & found it too time-consuming to keep up.
Click to expand...
Click to collapse
+1 for this. used sideload wonder machine a while ago to get gameloft games onto my atrix, works well.
http://forum.androidcentral.com/and...-central-sideload-wonder-machine-v-1-2-a.html windows version found here. there are mac and linux versions too.

Related

Partially functional Atrix - Need Assistance or SBF File

So I as working on theming the Adeo ROM and must have messed something up. I didn't think it had to do with the framework files I had pushed so I did a factory reset to clear off all the 3rd party apps from the phone.
Well, since that reset, I can't access the phone in ADB, settings FC's, Market FC's, and I can't download/install an APK because of the security restrictions.
The phone is "functional", I can place/receive calls/sms and use the browser. USB to the PC works for everything except getting ADB access. I verified I can get it to recognize for RSDLite and for Fastbook so I figure using one of those methods should (eventually) provide me an avenue to get my phone 100% functional again.
Does anyone happen to have or know where I could find signed files for Fastboot to replace the entire /system partition or an SBF file to flash the phone back to stock? Or possibly any other solutions?
Also, before I get flamed as a n00b who broke a phone, I've worked on over a dozen different Android handsets and I was well aware I was working without a safety net. This is NOT my primary phone so if I need to I can patiently wait for an SBF to leak. I'm just checking to see if anyone knows any solutions already so I can get back to theming.
Sounds to me like a permissions issue. I had that after I fiddled with the contacts database to unrestrict pictures from third party apps. I would double check any files you modified and make sure they got chmod'ed back to what they should be.
You will have to somehow access the Settings to re-enable adb. When you did a factory reset, you disabled USB Development (aka adb).
For now the only known way to recover is through adb. No fastboot or signed update.zip for now.
navalynt said:
So I as working on theming the Adeo ROM and must have messed something up. I didn't think it had to do with the framework files I had pushed so I did a factory reset to clear off all the 3rd party apps from the phone.
Well, since that reset, I can't access the phone in ADB, settings FC's, Market FC's, and I can't download/install an APK because of the security restrictions.
The phone is "functional", I can place/receive calls/sms and use the browser. USB to the PC works for everything except getting ADB access. I verified I can get it to recognize for RSDLite and for Fastbook so I figure using one of those methods should (eventually) provide me an avenue to get my phone 100% functional again.
Does anyone happen to have or know where I could find signed files for Fastboot to replace the entire /system partition or an SBF file to flash the phone back to stock? Or possibly any other solutions?
Also, before I get flamed as a n00b who broke a phone, I've worked on over a dozen different Android handsets and I was well aware I was working without a safety net. This is NOT my primary phone so if I need to I can patiently wait for an SBF to leak. I'm just checking to see if anyone knows any solutions already so I can get back to theming.
Click to expand...
Click to collapse
When I lost ADB access because of a hard reset (I think), this is what I did to fix my issue: http://forum.xda-developers.com/showthread.php?t=974824
I never lost root after a hard reset so I went to the market and bought root explorer and sqlite editor and copied the adbd to the /sbin folder to fix adb. I then bought sqlite editor and followed this: http://forum.xda-developers.com/showthread.php?t=972760 to re-enable side loading of apps. To install apps that I had the apk's for.
I still lose adb after a reset, but I can copy the adbd file to the /sbin folder and adb works again until I reset the phone.
I made a post about losing adb access on the motorola support forums: https://supportforums.motorola.com/message/332307#332307 to see if there were any solutions, but Mark said he would get back to me after trying to reproduce my problem.
I hope this helps.
I think I'm just up **** creek without a paddle for the moment because I can't connect via ADB, the Market force closes, and the security restrictions won't let me side-load any applications via download from the browser. I can't manually add ADB because I have no way to move the files to where they need to be.
Thanks for the replies! airbillion, I'm following your thread at the Motorola Owners' Forum to!
navalynt said:
I think I'm just up **** creek without a paddle for the moment because I can't connect via ADB, the Market force closes, and the security restrictions won't let me side-load any applications via download from the browser. I can't manually add ADB because I have no way to move the files to where they need to be.
Thanks for the replies! airbillion, I'm following your thread at the Motorola Owners' Forum to!
Click to expand...
Click to collapse
No problem. That sucks, I'm not sure what you can do. Hopefully motorola or someone here will get a sbf soon so we can mess with our phones and have a way to fully recover. I hope you get it working again. Good luck!
navalynt said:
I think I'm just up **** creek without a paddle for the moment because I can't connect via ADB, the Market force closes, and the security restrictions won't let me side-load any applications via download from the browser. I can't manually add ADB because I have no way to move the files to where they need to be.
Thanks for the replies! airbillion, I'm following your thread at the Motorola Owners' Forum to!
Click to expand...
Click to collapse
Have u not tried sideload wonder machine love that thing used it alot when my wife had her backflip
Sent from my MB860 using XDA App
shadowscreation said:
Have u not tried sideload wonder machine love that thing used it alot when my wife had her backflip
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Requires USB Debugging to be enabled, but I have no access to enabled it due to Settings force closing and no ADB access in pre-boot.
Could you download Android Terminal Emulator 's apk to your sdcard, then install it using a apk install you may already have that work.
If you can get any terminal access from your phone, do a su, then launch /sbin/adbd. This should hopefully give you adb shell access. Without needing to enable USB debugging.
adlx.xda said:
Could you download Android Terminal Emulator 's apk to your sdcard, then install it using a apk install you may already have that work.
If you can get any terminal access from your phone, do a su, then launch /sbin/adbd. This should hopefully give you adb shell access. Without needing to enable USB debugging.
Click to expand...
Click to collapse
It won't let me install a downloaded APK because of the security restriction.
If you have an SD card, try booting into recovery with an update.zip on the file.
I can get into the recovery, but the update.zip file needs to be signed. I created one that will push the original copies of the framework files I was working with but it won't install because it's signed with test keys. The stock recovery 3e needs update.zip files signed with the manufacturer release-keys which only Motorola has.
https://supportforums.motorola.com/thread/46051?tstart=30
I started a thread on the official Motorola Owner's Forum in hopes I can find a full factory restore method for the OS. It's unfortunate that unlike HTC and other manufacturers who release full wipe RUU files Motorola has chosen to keep their restore files internally.
http://www.4shared.com/file/7YXo_gmO/update.html
That's the link to the update.zip file I was trying to use that fails because it's only signed with test-keys.
Retracteddd

[Q] Easy way to Root Nook Tablet!

Does anyone know a simple way to root a new Nook tablet? I've tried most of the ways on this site and others but I still can'tdo it! Most of the instructions assume that you know about certain files and programs but I can't get pass the first few set of instructon without my Nook saying that it will not give me access. I like my Nook but I would like access to the android applications. Thanks for the help!
Seriously no easier way then below. Watch the video, follow the instructions.
http://forum.xda-developers.com/showthread.php?t=1354487
It sounds like you don't have your drivers installed correctly. Go to This Thread and scroll down to the driver issues area.
If you can get your device to show from 'adb devices', there is no reason you shouldn't be able to achieve root.
or just use the sd cards and dont have to mess with driver. Download file, 2 clicks and makes the sd card, reboot tablet and install zip file. PROFIT!
I've been using Albert's route
http://forum.xda-developers.com/showthread.php?t=1439630
Download the zip, follow the instructions. If you get confused watch the youtube video.
I've rooted and reset my NT 3 times in the last 3 weeks playing with various builds. The one linked above (4.5) is the best I've found yet.
I even get Calendar to sideload without any hanky panky... which didn't work with other builds.
I can confirm, that rooting by SDCARD (i.e. with SD_ROOT_NTV4_5.zip file) is the easiest way.

[Q] Proscan PLT7044k, Rooting, Roms, Any way to make it Suck Less?

A friend of mine picked up a Proscan PLT7044k. Great cheap tablet from BigLots they wanted to gift me as a late birthday present. Sure it's cheap, but cheap can be good right? Especially if it's a backup device or something to tinker with.
Trouble is we're running into some issues. Fine. Great it's a cheap Chinese tablet. We both get that we're not expecting nexus or ipad mini or even kindle fire quality. However GetJar is, apparently, not working correctly, Amazon Marketplace (which it was linked to in the device) will not let you change settings, and My friend isn't wanting to try rooting to get google play working just yet because we're not sure if the Thread found on the matter has all the bugs worked out.
This Thread seems to be closest to what 'we' want but the model number is different (it's supposed t obe the same device save for the one we're working with included a hardware keyboard/case, but one never knows.)
Of Note when queried my friend only saw a one gig internal storage device instead of the four gig advertised and described the external media slot as a SD slot instead of a micro-sd.
So, since I am, for the moment, treating this device as different and not wanting to risk bricking before info can be gained on if it's worht keeping or taken back, trying to figure out the following:
Very minimum how does one get google play on this gizmo.
Is there anything that can be done about the touch screen lag?
Is there a CyanogenMod port that will work or other custom rom that might help with the issues of lag?
Any advice would be welcome/useful. Even 'RTFM' with links to other threads.
Edit: Be Aware my 'primary' computer is running linux (peppermint OS3, ubuntu 12.04 based distro.)
I just got this tablet. You have root accesses out of the box. There are 2 ways I have installed play store. Through root explorer and through adb push. google gapps for jellybean. here is the manual and firmware proscanvideo.com/item.asp?itemnmbr=PLT7044K . I can make a tute anyone needs.
I ended up taking mine back and getting a Nook Touch. Sure I'll still need to root the thing to get much use out of it beyond being an e-reader but even with it not-rooted it's still actually a pretty good experiance.
Sorry Icouldn't be a trailblazer to anyone getting a proscan and wanting to improve on it.
a noob, but I honestly have tried...
Tearran said:
I just got this tablet. You have root accesses out of the box. There are 2 ways I have installed play store. Through root explorer and through adb push. google gapps for jellybean. here is the manual and firmware proscanvideo.com/item.asp?itemnmbr=PLT7044K . I can make a tute anyone needs.
Click to expand...
Click to collapse
ok, I have tried very VERY hard to find out how to root my proscan plt7044k. I've tried following the few links that I have found, and have found them to be broken. Or the items just won't download onto my computer or just flat don't work. It appears that what I have to do is to find a driver for this thing so that my computer can recognize it, and the Curtis website doesn't give any driver information. Yes, I did download their manuals and tech material, and they DON'T WORK. All they provide is a powerpoint thing that says to "find program x, do y, etc", without providing that program. I cannot find a driver for this p.o.s. ANYWHERE, nor any that would work for an earlier model and then also "might" work for mine.
I really want to get rid of the "getjar" crap, as well as all of the bloatware that google puts into these things!
Tearran said:
I just got this tablet. You have root accesses out of the box. There are 2 ways I have installed play store. Through root explorer and through adb push. google gapps for jellybean. here is the manual and firmware proscanvideo.com/item.asp?itemnmbr=PLT7044K . I can make a tute anyone needs.
Click to expand...
Click to collapse
I have checked device for root it is not rooted out of the box. If you have a tutorial to actually get root it would be appreciated.
Sent from my SGH-T889 using xda premium
musicafe said:
I have checked device for root it is not rooted out of the box. If you have a tutorial to actually get root it would be appreciated.
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
The tablet is semi rooted out of the box it only needs supersu (http://forum.xda-developers.com/showthread.php?t=1538053). You need to adb push this file.
[HOW-TO] Install & Use ADB tool (http://forum.xda-developers.com/showthread.php?t=1474956)
How to push files through ADB (http://forum.xda-developers.com/showthread.php?t=642437)
Basic adb/shell commands for noobs (http://forum.xda-developers.com/showthread.php?p=3820215)
Tearran said:
The tablet is semi rooted out of the box it only needs supersu (http://forum.xda-developers.com/showthread.php?t=1538053). You need to adb push this file.
[HOW-TO] Install & Use ADB tool (http://forum.xda-developers.com/showthread.php?t=1474956)
How to push files through ADB (http://forum.xda-developers.com/showthread.php?t=642437)
Basic adb/shell commands for noobs (http://forum.xda-developers.com/showthread.php?p=3820215)
Click to expand...
Click to collapse
I've looked everywhere including the links you provided, and adb don't find this device, oh well, bout to give up on this
side load
Goggles2114 said:
A friend of mine picked up a Proscan PLT7044k. Great cheap tablet from BigLots they wanted to gift me as a late birthday present. Sure it's cheap, but cheap can be good right? Especially if it's a backup device or something to tinker with.
Trouble is we're running into some issues. Fine. Great it's a cheap Chinese tablet. We both get that we're not expecting nexus or ipad mini or even kindle fire quality. However GetJar is, apparently, not working correctly, Amazon Marketplace (which it was linked to in the device) will not let you change settings, and My friend isn't wanting to try rooting to get google play working just yet because we're not sure if the Thread found on the matter has all the bugs worked out.
This Thread seems to be closest to what 'we' want but the model number is different (it's supposed t obe the same device save for the one we're working with included a hardware keyboard/case, but one never knows.)
Of Note when queried my friend only saw a one gig internal storage device instead of the four gig advertised and described the external media slot as a SD slot instead of a micro-sd.
So, since I am, for the moment, treating this device as different and not wanting to risk bricking before info can be gained on if it's worht keeping or taken back, trying to figure out the following:
Very minimum how does one get google play on this gizmo.
Is there anything that can be done about the touch screen lag?
Is there a CyanogenMod port that will work or other custom rom that might help with the issues of lag?
Any advice would be welcome/useful. Even 'RTFM' with links to other threads.
Edit: Be Aware my 'primary' computer is running linux (peppermint OS3, ubuntu 12.04 based distro.)
Click to expand...
Click to collapse
You can side load the Play Store, also, what version of Android is the tablet running?
IRIE4IPIER said:
I've looked everywhere including the links you provided, and adb don't find this device, oh well, bout to give up on this
Click to expand...
Click to collapse
You probably have a driver problem. I use ADB Konnect (wireless ADB) To push over wifi.
Is there any possible way to flash a custom ROM to it the factory ROM has too much crap on it memory wise?
JayMax03 said:
Is there any possible way to flash a custom ROM to it the factory ROM has too much crap on it memory wise?
Click to expand...
Click to collapse
I Titanium backup to uninstall the bloat. You also can use Root explorer or adb to rename the apk extension of the bloat to get rid of the eyesore
Sent from my Nexus 7 using Tapatalk
proscan 7" tablet.
you kngoo root, make sure your using windows...anything past vista.
i used wkindows 7 or 8 from an internet cafe and my proscan is plt7602g and it worked fine...i even reset from the android service menu (green dead dude) and it worked but make sure most of all that you have the verify apps off so you can root it. because it will still be a danger to ur tablet. there is always a bricking chance, one you instakll kingoo root and run the program plug in ur tablet press root and the app takes care of it all. and if you google kingoo app or kingoo root it will show a main website and go from there
i got my proscan PLT1077G and i haven't found a **** yet i want to change my tablet android OS but don't have a developer who can help us with this one i think proscan is not that popular
Tearran said:
The tablet is semi rooted out of the box it only needs supersu (http://forum.xda-developers.com/showthread.php?t=1538053). You need to adb push this file.
[HOW-TO] Install & Use ADB tool (http://forum.xda-developers.com/showthread.php?t=1474956)
How to push files through ADB (http://forum.xda-developers.com/showthread.php?t=642437)
Basic adb/shell commands for noobs (http://forum.xda-developers.com/showthread.php?p=3820215)
Click to expand...
Click to collapse
Going to try this on the PLT7650G
Need firmware file for plt7223g
prepaidguy9081 said:
Going to try this on the PLT7650G
Click to expand...
Click to collapse
so much for this method - I used kingo root for windows, slow but works. just go grab a beer and come back in ten.

[Q] Azpen A701 Tablet

Does anyone have any information on rooting the AZPEN A701 Tablet (ICS OS)?
All my searches keep popping up for the Acer Iconia A701.
drivers
I found the correct address for the drivers for this tablet, and 2 others from Azpen.
www.mediafire.com/azpensupport
The links on their webpage incorrectly spell mediafire and also include .com in the last part of the link.
Note: I recently got an email from Azpen telling me the exact same url that I had already figured out. Their email is about week to a week and a half after I sent them a request for the proper address. Also, as of the time I am posting this update, they have not corrected the address on their website.
Tried methods
I have tried SuperOneClick which reports that the system is rooted, but ADB Wireless says it is not.
I have tried Bin4ry's Root Many Android! (options 1, 3, and G) and briefly got temp root on option 3 but I lose wireless functionality (I get one or the other message from ADB Wireless (no root or no wireless), verified that Wireless connection has been turned off and won't turn back on until reboot which loses me the root again).
Retries
Ok, finally rooted the Azpen A701.
What I did:
First, I went back to SuperOneClick, and choose Unroot to reverse anything it did.
Retried Bin4ry's Root Many Android! v31, option 1 (new standard method), test, failed, unroot, 3 (old method), test, failed, unroot, then G (Google Glass method), test, WORKED this time.
Verified by using a root browser (can see files/folders(subdirectories) in /data after giving permission), a root checker (note: do not turn on SuperUser's Autoanswer, gives false information from some checkers), and ADB Wireless works while in range of a wireless router/source.
I am guessing that somehow the leftovers from SuperOneClick were affecting my results with Bin4ry's collected scripts.
Props to all that developed each of those programs and scripts.
I don't know if anyone will be seeing this but I hope it helps anyone needing the info.
Just curious to know if there is a rom available in case this method bricks the tablet? I bought this tablet a couple of weeks ago because I wanted to mess with one and I didn't have a lot of cash to spend. I use it daily and my kids play games on it. I can't afford to get another anytime soon, however I'd like to have it rooted so that I can remove factory installed apps that I don't want or need.
no idea
BizarreMan said:
Just curious to know if there is a rom available in case this method bricks the tablet? I bought this tablet a couple of weeks ago because I wanted to mess with one and I didn't have a lot of cash to spend. I use it daily and my kids play games on it. I can't afford to get another anytime soon, however I'd like to have it rooted so that I can remove factory installed apps that I don't want or need.
Click to expand...
Click to collapse
I have absolutely no idea. The only additional rom I have seen ANYWHERE is the Jellybean update for it (see driver link above). This seems to not be a very popular tablet to work with, going by the fact I received no help from anyone here. All research on this so far has been done by me. I stumbled on to Bin4ry's rooting method by accident. I'm not a ROMer, I don't know how to build one. Also I don't know which ROM backup method to use on it/will work with it.
Alright
I'll give it a shot during the weekend, I've grabbed the jelly bean update (thanks for the link). Hopefully all goes well. I figured there would be little to no support for this device, however due to a tight budget I chose to get this tablet.
I don't really mind the lack of support, however I'd like to have root because like on my old phone I had a few programs I used that required root.
Thanks again.
*Edit*
I attempted last night as I had free time to do the root method and unfortunately it did not work on my device. Not sure why it did not work. I'll try it again at a later time when I can. I also attempted to upgrade to 4.2 but it seems as though I am having issues with it as well.
Maybe I'm just stuck with the tablet as is
trying again...
BizarreMan said:
I'll give it a shot during the weekend, I've grabbed the jelly bean update (thanks for the link). Hopefully all goes well. I figured there would be little to no support for this device, however due to a tight budget I chose to get this tablet.
I don't really mind the lack of support, however I'd like to have root because like on my old phone I had a few programs I used that required root.
Thanks again.
*Edit*
I attempted last night as I had free time to do the root method and unfortunately it did not work on my device. Not sure why it did not work. I'll try it again at a later time when I can. I also attempted to upgrade to 4.2 but it seems as though I am having issues with it as well.
Maybe I'm just stuck with the tablet as is
Click to expand...
Click to collapse
It may have been the sequence I used. Tried SuperOneClick several times (as above it said tablet was rooted but several apps said it wasn't) which installed su, busybox, and superuser. Then found Bin4ry's method, got temp root (tryied 1, 3, and Glass). Then went back to SuperOneClick and unrooted, returned to Bin4ry's and finally got it with Glass method.
Don't know if that helps
Well
After several attempts via Bin4ry and SuperOneClick I have obtained root on this tablet.
Not quite sure which actually did it though as with super one click it froze on me during both times I used it and each time I tried Bin4ry's method I kept getting messages about connecting my device (which was connected fro the get go).
After several tries with these programs yesterday and finally saying screw it I decided to add some apps that required root. I don't know why I did it I just figured it was worth a shot. I added Super User which told me I was rooted, then I added Titanium Backup and was able to use it as it is intended. For added measure I also installed and ran root checker which as well as super user verified that the tablet had been rooted.
Good to see that your were able to root.
BizarreMan said:
After several attempts via Bin4ry and SuperOneClick I have obtained root on this tablet.
Not quite sure which actually did it though as with super one click it froze on me during both times I used it and each time I tried Bin4ry's method I kept getting messages about connecting my device (which was connected fro the get go).
After several tries with these programs yesterday and finally saying screw it I decided to add some apps that required root. I don't know why I did it I just figured it was worth a shot. I added Super User which told me I was rooted, then I added Titanium Backup and was able to use it as it is intended. For added measure I also installed and ran root checker which as well as super user verified that the tablet had been rooted.
Click to expand...
Click to collapse
So I think we can safely say that using both methods together + patience will root this tablet (don't know why one or the other wouldn't do it).
Not having any luck
CyberSpiderPrime said:
Does anyone have any information on rooting the AZPEN A701 Tablet (ICS OS)?
All my searches keep popping up for the Acer Iconia A701.
Click to expand...
Click to collapse
I have been trying to root AZPEN A701 for the past week, I have tried everything written on this forum. Any help PLEASE!
clean slate
Are you willing to do a full restart on the tablet (factory reset)? I had to do that before my root took, as I found on other systems that I have rooted some programs you load can interfer with rooting. Save any personal data before you do this, programs can be reinstalled from Google Play or (hopefully you saved them if you downloaded them) your computer
Factory reset:
Press and hold up volume button then press and hold power button. The screen will remain black (no backlight)
Wait 4 seconds then release both buttons (backlight will come on). Shortly the android on it's back with the open torso (the sick android) will be displayed.
Press the down volume button. You should see 5 options available- You are now in the System Recovery program.
Using the up or down volume button to highlight an option then press power to select the option.
1) select Wipe Cache Partition
let the unit reboot, then turn it completely off
reenter System Recovery again.
2) select Wipe data/factory reset
let the unit reboot, then turn it completely off
The system is as clean as it is going to get now.
On your pc (don't know for MAC's) download the drivers, Android programs needed (Android Debug Bridge -ADB- is part of the Android Development kit and some Java Development Kits), and both SuperOneClick and Bin4ry's root software. Install all software and drivers as per their instructions. Run SuperOneClick and Bin4ry's root programs. Busybox and SuperUser will be added automatically by these root programs.
While having wifi and internet access (McDonalds anyone?), re-sign up for Google Play (sorry, but the settings got wiped earler). Go to Google Play and let all the programs update. Update Busybox and SuperUser if needed/possible.
Download any root enabled file system browser (FSB) (permission will have to be granted in program to use root functions) - I used Ghost Commander for mine. It may take a bit to find it in the directory structure for the FSB you downloaded but you need to get to the root system folder.
Ghost Commander has a Local Storage option press it and an new list of folders/files will be displayed, move to the previous folder level (double dots at the top) and give permission to move to a system folder, move to the previous folder again to get to root directory, "/mnt" is the directory you just came out of and is highlighted but you will be at the root of the file system.
Enter the "/data" directory. If you can see files listed there, you have root; if not rooting attempt failed.
Once rooted, doing a system cleaning and Factory reset will not remove root but will remove SuperUser and Busybox (re-run one of the root programs to re-install then update the next time you are on the internet/web). Updating/upgrading the rom will remove root if the rom does not have root activated - I don't know of any custom roms for this tablet (there is a Jellybean upgrade in the Azpen website, if they haven't updated to the correct web address then use the one I listed on the front page, mediafire is spelled wrong in the address). Nandroid level system backup is not available yet for this tablet to my knowledge.
For several reasons, do not turn on SuperUser's automatically give permission option (the one that affects all programs), except on a one for one basis: 1) some root testing programs will fail if this option is turned on, 2) security: turning this on will allow ALL programs - including some malicious ones - to have super-user rights, 3) you will get to know which programs are asking for root permissions beforehand not after, you may want some to have automatic access (like DroidWall in my case, a firewall) and not others.
Also other information that can be useful:
/sdcard does not refer to the removeable SDCard but to the internal user data area. All programs that can be moved to a SDCard (like by Apps2SD) will be moved to this directory by default (some may allow re-assignment of the destination location) instead of the removeable SDCard (blame Azpen, it was their decision to use the directory and name that way). On most other systems /sdcard is the removeable SDCard.
/extsd is the removeable SDCard, when installed, maximum size is 32Gb.
/usbhost1 is for any usb flashdrive connected by a USB-OTG cable (OTG means On-The-Go, special usb cable that puts the tablet into host mode, similar to connecting a flashdrive to a computer, the cable is not a standard Data Connect/transfer cable, one USB-OTG comes with this tablet). Note about USB-OTG cables: if one is connected you can connect either a flashdrive, usb keyboard, usb mouse, combo keyboard/mouse unit, or a powered usb 2.0 hub. Only one flashdrive can be connected at a time (anyone know of downloadable software that would allow 2 or more? I know some modified kernels can allow more than one) so with a hub you can connect a flashdrive + keyboard + mouse (I use the RII wireless combo keyboard and mouse with mine). Maximum size appears to be 8GB, format must be FAT32; will be testing with a 16GB key shortly.
Azpen A701 and Jelly Bean
Shortly after I wrote the above I had to re-flash my tablet, but Azpen had deleted the ICS image (after a request it was restored to the site, get it while you can) and had to flash Jelly Bean. I found there were troubles with this image.
First: I could not write to either the external SDCard (called extsd) nor an attached USB flash key; reading was unaffected. I found this out when I attempted to reassign my backup location to the external sdcard and it was unable to create the directories.
Second: I couldn't find a rooting program.
After a little research, I found that the external media had not been given R/W permission in the platform.xml file - I could actually navigate the FS and read the file even without root.
Also I finally found after 2 days of searching a root program, VROOT, http://forum.xda-developers.com/showthread.php?t=2434453, that would work. Be prepared to deal with Chinese for a little bit and follow the instructions on that page (press the buttons to see screenshots). The superuser app needed to fix/replace the Chinese app is SuperSU (Google Play) which supposedly fixes problems found with other superuser apps. Once you have downloaded SuperSU, had it download/update its binaries and have rebooted, you will have to disable the Chinese Superuser app as you are unable to uninstall it using the app manager: I located it by its icon (shield with cog) in /system/app and appened '.old' to the name: "Superuser.apk" => "Superuser.apk.old'. I didn't use Titanium Backup as suggested because I am not a fan of the program .
platform.xml is located in /system/ext/permissions. After you have root, open platform.xml in what ever text processor you want locally or transfer it to your computer and work with it. You will have to add '<group gid="media_rw">' to the 'WRITE_EXTERNAL_STORAGE' group, on the line after '<group gid="sdcard_rw">' (don't type the single quotes but the double quotes are needed) and write the file back to its location (need root for that, adb pull/push may be possible to fix this). Remember on this tablet, sdcard refers to the internal user storage, media_rw will give permissions to the extsd (external sdcard) and USBHost1 (using included USB-OTG cable and a flash drive). I rebooted the tablet and tested the RW state of extsd, and voila, it now is write capable.
I wish there was more aid on this tablet but since it is not mainstream (not made by a big manufacturer like LG, Motorola, Samsung, etc.) I doubt that it is coming (I am not a ROMmer but have been using computers since the 80's, so I know a few tricks and am always learning). I will keep adding info as I find or fix it.
I will probably go back to ICS as some of my programs are not working right, and JB is sluggish.
I just picked up the A700 from Microcenter, and this is the ONLY reference to rooting the device I could find. The Azpen website doesn't even acknowledge the device's existence. I just came across this yesterday: Azpen A700 - Cyanogenmod forums. I used the Kingo method without a hitch.
Hopefully, all the other folks who get that tablet for the pre-Black Friday sale who found this link will benefit.
johncro13 said:
I just picked up the A700 from Microcenter, and this is the ONLY reference to rooting the device I could find. The Azpen website doesn't even acknowledge the device's existence. I just came across this yesterday: Azpen A700 - Cyanogenmod forums. I used the Kingo method without a hitch.
Hopefully, all the other folks who get that tablet for the pre-Black Friday sale who found this link will benefit.
Click to expand...
Click to collapse
I picked up this tablet also. Not bad for $40. I used this method to root http://www.cydiaimpactor.com/ It worked the first time. I just had to do it on an old XP machine. Windows 8 would not load the right android drivers. Now I'm working on getting Titanium backup to see my external SD card.
comstar said:
I picked up this tablet also. Not bad for $40. I used this method to root http://www.cydiaimpactor.com/ It worked the first time. I just had to do it on an old XP machine. Windows 8 would not load the right android drivers. Now I'm working on getting Titanium backup to see my external SD card.
Click to expand...
Click to collapse
I was going to return it as no rooting procedure would work....(I only bought it so I could have a android tab to fool with...i'm windows tablet all the way)...and once I tried out that rooter it worked...thanks alot for the info!
cheeb said:
I was going to return it as no rooting procedure would work....(I only bought it so I could have a android tab to fool with...i'm windows tablet all the way)...and once I tried out that rooter it worked...thanks alot for the info!
Click to expand...
Click to collapse
Glad it worked for you! I started this thread for the A700 http://forum.xda-developers.com/showthread.php?t=2532464 - No activity in it yet. But if you come across anything good post it over there.
Sent from my Transformer TF101 using XDA Premium HD app
Update
I am glad to see that others are taking an interest in this tablet.
I found 2 methods that worked and am glad that others are finding more.
Now if I can get the boot loader cracked I could finally make a nandroid copy and save myself 4+ hours restoring everything when it goes wonky. This has happened twice- OS partition fills up (and don't know why) and the device resets to near factory reset level (even some of the factory apps are missing) and won't install anything but the smallest of apps which are deleted on the next reboot; the only solution is to re-flash the tablet. Note that I have gone back to using ICS as JB has other problems (external media including its own sdcard partition is not rw enabled for one).

Fire TV Stick Downgrade/Firestarter 3.2.2/Root Guide

Hello ive not done any guides before but since i had to search all over to try find out what i was looking for and stumbled across a lot of good information and thought id share it. None of this was my findings but there isn't anything clear on how to actually accomplish this on a Fire stick.
Im going to attempt to share how i have managed.
This guide assumes you already know how to transfer files to your stick.
First off, current Fire stick os is 5.2.1.0 and is rootable with Kingoroot.
https://root-apk.kingoapp.com
1. Download Kingoroot and ADB to your Fire stick, do this whichever way you normally get apk/files onto your Fire stick.
2. Download Kingoroot superuser and ADB to your Fire stick.
3. Run the Kingoroot tool and let it finish, when you have root, install Kingo roots Superuser. (If you install this before rooting it wont make any difference).
Now you should have a rooted Fire stick on 5.2.1.0 with Kingoroots SuperUser.
Now its time to downgrade your Fire stick. This file was provided by AFTVnews over at another thread and cuki3r3k83bln accomplished downgrade on the thread also so please leave thanks for them as before he posted the file and information i had no idea it was possible. Im suggesting to download the 5.0.5 file as i did because this was when firestarter worked with home button detection.
Download Fire Stick os 5.0.5
http://amzdigitaldownloads.edgesuit...te-kindle-montoya-54.5.3.7_user_537174420.bin
Once you have it downloaded rename the downloaded file to update.bin.
Im going to explain how i did it, i know there is many other variations on how to accomplish this and im not too familiar with adb commands but the way i will show is the way it worked for me.
We need to transfer the downloaded and renamed update.bin to the Fire stick so if you would like to transfer it with apps to fire or through command or any other variation thats fine but ill show commands used from windows laptop using adbLink.
Please note, if your using a different method to transfer you will have to slightly modify step 5 on where your update.bin is stored so cd /sdcard/download. if your update.bin is stored in download folder.
Another note is to make sure your file name is correct, mine was named update.bin.bin rather than update.bin this was fine just make sure to name it correctly or you will have to modify step 6 and step 8.
1. Open up adbLink and connect your device.
2. Push the update.bin to the sdcard. (this takes quite alot of time as your pushing 311mb file so be patient)
3. Once pushed you need to open up ADB Shell.
4. Run the command: su
5. Run the command: cd /sdcard
6. Run the command: mv ./update.bin /cache/
If you get an error about no space on device do the following:
Run the command rm -f /cache/*.bin
Run the command rm -f /cache/*.zip
Run the command exit
Run the command exit then reopen ADB Shell in adbLink repeat step 6.
7. Run the command cd /cache/recovery
8. Run the command echo --update_package=/cache/update.bin > command
9. Run the command reboot recovery
Your Fire stick should automatically start the downgrade and take 10 minutes or so.
As soon as its finished go back to your Kingoroot app and re-root your Fire stick. Then block updates (method 1) using AFTVnews guide at:
http://www.aftvnews.com/how-to-block-software-updates-on-the-amazon-fire-tv-or-fire-tv-stick/
You should now be on 5.0.5 rooted and have updates blocked
All your apps should be still intact. Make sure you uninstall appstarter/firestopper and reinstall firestarter 3.2.3 (if you use it)
Then follow AFTVnews guide on how to re-enable it here:
http://www.aftvnews.com/how-to-cont...v-and-fire-tv-stick-software-version-5-0-5-1/
Please give the credit deserved to @AFTVnews.com and @cuki3r3k83bln
Its suggested all over to hold off before doing anything that could brick the device until rbox releases a recovery.
Please do not use any type of Su modifying tool/script/apk eg: SuperSume as these do not work and you will end up with a small brick.
Also its been pointed out to me by @deanr1977 that if your going to use this guide and decide to update Fire Stick os in the future, it maybe safer to unroot it first.
With that out of the way please excuse the bad layout of the guide as im no expert and would like to just share my experience.
Would I be able to go back to 5.2.1.0 once custom recovery and rom is released?
FireTho1 said:
Would I be able to go back to 5.2.1.0 once custom recovery and rom is released?
Click to expand...
Click to collapse
i cant see any reason why not, either grab the 5.2.1.0 .bin file and follow the guide using that or let it automatically update after re-enabling updates.
Are there any reasons for downgrading to 5.0.5? Does it have any advantages?
Bierfreund said:
Are there any reasons for downgrading to 5.0.5? Does it have any advantages?
Click to expand...
Click to collapse
As far as im aware upto now, it seems that Firestarter home button detection works as it should, and firmware after this Firestarter will not work with home button detection.
Which is a big thing for me personally as i only use Firestick for netflix and kodi and its much easier to launch from within Firestarter.
Its good to know that the process of upgrading/downgrading is applicable to Fire stick as you never know what Amazon will try to take from you.
You sir are my hero. Kudos for the tutorial!
sconnyuk said:
i cant see any reason why not, either grab the 5.2.1.0 .bin file and follow the guide using that or let it automatically update after re-enabling updates.
Click to expand...
Click to collapse
Its not recommended to let it auto update from root, unroot first then re-enable the update progress.
Also please can you note in your guide that its not recommended to try to swap the Su for Chainfires Su with the Super Sume or Super Sumepro app because so many people on this forum have bricked with this method & if any new users try your way & after want to unroot/swap method after the first boot they could have a non working device.
Ive not tried this guide myself (i dont need too) but if its working fine this info would be good to have here.
deanr1977 said:
Its not recommended to let it auto update from root, unroot first then re-enable the update progress.
Also please can you note in your guide that its not recommended to try to swap the Su for Chainfires Su with the Super Sume or Super Sumepro app because so many people on this forum have bricked with this method & if any new users try your way & after want to unroot/swap method after the first boot they could have a non working device.
Ive not tried this guide myself (i dont need too) but if its working fine this info would be good to have here.
Click to expand...
Click to collapse
Fair point about pointing out about the brickable and dangerous su swapping methods with supersu me etc.
I will add a mention about it after the line that reads:
'Its suggested all over to hold off before doing anything that could brick the device until rbox releases a recovery.'
As for not recommended to auto update while rooted, ive had 2 sticks and a Fire Tv 2 auto update from 5.0.5 to 5.0.5.1 and then to 5.2.1.0 when my router was reset, (im sure im not the only one from what ive read either).
But since im a helping type of guy ill add this also.
Ok mate, just going by what's been said from the AFTVNews & Amazon Firestick forums. Glad you are including this thanks, Its just some only skim through the threads & read only the parts they want to so if this is included it may cut down on the "I've bricked my Amazon device please help threads" which clog up the forum.
Sent from my SM-G900F using Tapatalk
i'm trying to downgrade to the point where display mirroring worked on windows devices, this is before 5.0.5, can i use this method to downgrade to another bin before 5.0.5?
sins07 said:
i'm trying to downgrade to the point where display mirroring worked on windows devices, this is before 5.0.5, can i use this method to downgrade to another bin before 5.0.5?
Click to expand...
Click to collapse
Id take a stab and say if your stick originally came with a firmware below 5.0.5 but I honestly do not know as ive not tried but I cant see why it wouldnt work. You can go from 5.2.1.0 to 5.0.5.1 or to 5.0.5 so id imagine so.
What features have been removed by 5.0.5? Im interested myself and may try this myself if there is features I could use.
Amazing! I can't believe this was hard to find as all the news out there say you can only root the stick using a hardware mod.
I downgraded and rooted both my Sticks. Installed Firestarter 3.2.3, installed Seeder, removed unneeded processes from running and these things are super quick now. You still have to load the crappy slow Amazon launcher to keep the settings but oh well. Nicely done, now I hope a recovery option comes out and I can mess around further . Heatsink and overclocking anyone? lol
@vulcan4d recovery & prerooted rom is being worked on at the moment by rbox in this forum
Sent from my SM-G900F using Tapatalk
vulcan4d said:
Amazing! I can't believe this was hard to find as all the news out there say you can only root the stick using a hardware mod.
I downgraded and rooted both my Sticks. Installed Firestarter 3.2.3, installed Seeder, removed unneeded processes from running and these things are super quick now. You still have to load the crappy slow Amazon launcher to keep the settings but oh well. Nicely done, now I hope a recovery option comes out and I can mess around further . Heatsink and overclocking anyone? lol
Click to expand...
Click to collapse
Can I ask what processes you removed/stopped and how you accomplished this?
Id like to do the same on 2 of my sticks.
sconnyuk said:
Can I ask what processes you removed/stopped and how you accomplished this?
Id like to do the same on 2 of my sticks.
Click to expand...
Click to collapse
I would like to give credit to this post for removing unneeded services:
http://forum.xda-developers.com/fire-tv/help/root-disabling-apps-services-bloat-t3325333
I only found a few from the list but that list was meant for a Fire TV so I'm sure there is more running. Just launch ADB Shell in ADBFire/Link and type pm disable <service_name>
vulcan4d said:
I would like to give credit to this post for removing unneeded services:
http://forum.xda-developers.com/fire-tv/help/root-disabling-apps-services-bloat-t3325333
I only found a few from the list but that list was meant for a Fire TV so I'm sure there is more running. Just launch ADB Shell in ADBFire/Link and type pm disable <service_name>
Click to expand...
Click to collapse
Thanks ive disabled them as per the guide you linked to. Can I further ask what the program seeder does and whether to have it set to aggressive or not?
Thanks for the info.
@sconnyuk i've downgraded successfully kingo root'ed stick 5.2.1->5.0.5 . But funny thing was under root shell command "wipe data " .It wiped device clean but root still stays on . Got OTA disabled and my other king root 5.0.5 stick will have similar treatment .
nicefile said:
@sconnyuk i've downgraded successfully kingo root'ed stick 5.2.1->5.0.5 . But funny thing was under root shell command "wipe data " .It wiped device clean but root still stays on . Got OTA disabled and my other king root 5.0.5 stick will have similar treatment .
Click to expand...
Click to collapse
You will need to unroot it for root to go.
Kingoroot has the option to do this if its what you want.
You need mouse toggle for fire tv to navigate to the 'in app' menu icon if not plug fire stick into pc and run Windows version of Kingoroot to unroot.
Interesting, I just bought a 3rd Amazon stick to root. After running KingRoot, I've noticed I did not need to install KingUser at all. If you launch KingRoot again it allows you to launch KingoUser which is the same thing. I'm assuming that KingUser is just an updated version of what KingRoot already installs.
Sconnyuk, I checked all the boxes and chose Moderate. This was also mentioned in the XDA forums however sadly I cannot find the post anymore. Seeder is an application that has been around for a while which improves the response time on Android devices. There is a lot of technical details into how it works, but the point is the Amazon stick is not the fastest thing in the world and anything helps. Give it a try and see for yourself.
sconnyuk said:
Id take a stab and say if your stick originally came with a firmware below 5.0.5 but I honestly do not know as ive not tried but I cant see why it wouldnt work. You can go from 5.2.1.0 to 5.0.5.1 or to 5.0.5 so id imagine so.
What features have been removed by 5.0.5? Im interested myself and may try this myself if there is features I could use.
Click to expand...
Click to collapse
Miracast display mirroring became non-compliant with windows systems, it still works fine with android.

Categories

Resources