So I wanted to start out this review by saying, that when I originally bought my Evo 3D, I had purchased an Otterbox case which they sell at Sprint for it as well. I am a bit neurotic when it comes to my phones and always have to have them protected. I had the Otterbox on till the day I received my Seidio Active case from the great people of Seidio to try out. To be honest, I was actually going to use the Seidio case for a week and then go back to the Otterbox, but actually I just got back from Sprint, I just returned the Otterbox.
I have to say that in my opinion this Seidio case has the Otterbox beat hands down. The grooves that the Active case has for your fingers and the material they use for the silicone underlay just feel better. I compared the Otterbox to the Active case and when it comes to size, the Otterbox in my views is bigger and bulkier, but it seems that the Seidio case more protection. The silicone on the Otterbox feels like its half the amount used on the Active case, it’s a flimsier feel then Seidio’s. Now you would think because the Seidio case is smaller, it would give you less protection, but I feel that my phone is much more protected.
Another benefit with the size of the Seidio Active case, is that it feels much better in the pocket, however with both phones there is a bit of resistance when taking it from the pocket due to the silicone, but it happens with all silicone based cases. The only real downside I have seen with the Active case when using it for the past couple of days is that the silicone attracts lent from your pocket, but can easily removed with a wipe of a cloth.
The main thing that I am happy about, and have read in other reviews of the case is the protection the case provides to the camera. I had recently bought a TPU case from online and returned it immediately after seeing that the case lined perfectly with the camera casing, leaving it open to scratches and marks.
Another big thing that is a benefit with this case, compared to the Otterbox, is that all the cut outs for the power button and charging ports line up perfectly. I noticed that on the headphone jack on my Otterbox it was cut out incorrectly leaving me to have to jam the headphone jack into place. Not with the Active case, everything lines up perfectly. The silicone is cut to an exact precision. I know that the ports don’t have a cover like the Otterbox, but I actually prefer this, its an easy access and most of the time, I am prepared for those covers to break off in time, giving the phone a cheap look.
I know that some are disappointed that the case doesn’t come with a built in screen protector like the Otterbox but not I. I love that it doesn’t, I feel that the built in protectors have a more rubbery feel to them then other protectors. I would personally recommend the Screen Guards from Seidio; they are smooth like glass and fit to a tee.
In an overall judgment I give the phone a 10/10. There is not one thing I would change about this case, I love it more then anything. It looks great and feels even better. I would highly recommend this case to anyone who is in the market for a new case. Not only are you buying a great case, you are buying it from a great company that is willing to go that extra mile and help you out when it is needed, whether it is a return or replacement, and this type of customer service just gives me that little extra push to buy Seidio then any other company.
Looks just like the Innocase Rugged( minus the inner 2-piece hard shell) that I used on my Evo 4G before going to the Ballistic HC. How much is this case and who all sells it? Hope to be getting my 3D in the next couple weeks and may just get this case to go on it. My Innocase Rugged held up great, just replaced it with the Ballistic HC based on looks....
Still torn though honestly, I like the fact that the Otterbox covers the camera area better
Sent from my PC36100 using XDA Premium App
Matty Mo said:
So I wanted to start out this review by saying, that when I originally bought my Evo 3D, I had purchased an Otterbox case which they sell at Sprint for it as well. I am a bit neurotic when it comes to my phones and always have to have them protected. I had the Otterbox on till the day I received my Seidio Active case from the great people of Seidio to try out. To be honest, I was actually going to use the Seidio case for a week and then go back to the Otterbox, but actually I just got back from Sprint, I just returned the Otterbox.
I have to say that in my opinion this Seidio case has the Otterbox beat hands down. The grooves that the Active case has for your fingers and the material they use for the silicone underlay just feel better. I compared the Otterbox to the Active case and when it comes to size, the Otterbox in my views is bigger and bulkier, but it seems that the Seidio case more protection. The silicone on the Otterbox feels like its half the amount used on the Active case, it’s a flimsier feel then Seidio’s. Now you would think because the Seidio case is smaller, it would give you less protection, but I feel that my phone is much more protected.
Another benefit with the size of the Seidio Active case, is that it feels much better in the pocket, however with both phones there is a bit of resistance when taking it from the pocket due to the silicone, but it happens with all silicone based cases. The only real downside I have seen with the Active case when using it for the past couple of days is that the silicone attracts lent from your pocket, but can easily removed with a wipe of a cloth.
The main thing that I am happy about, and have read in other reviews of the case is the protection the case provides to the camera. I had recently bought a TPU case from online and returned it immediately after seeing that the case lined perfectly with the camera casing, leaving it open to scratches and marks.
Another big thing that is a benefit with this case, compared to the Otterbox, is that all the cut outs for the power button and charging ports line up perfectly. I noticed that on the headphone jack on my Otterbox it was cut out incorrectly leaving me to have to jam the headphone jack into place. Not with the Active case, everything lines up perfectly. The silicone is cut to an exact precision. I know that the ports don’t have a cover like the Otterbox, but I actually prefer this, its an easy access and most of the time, I am prepared for those covers to break off in time, giving the phone a cheap look.
I know that some are disappointed that the case doesn’t come with a built in screen protector like the Otterbox but not I. I love that it doesn’t, I feel that the built in protectors have a more rubbery feel to them then other protectors. I would personally recommend the Screen Guards from Seidio; they are smooth like glass and fit to a tee.
In an overall judgment I give the phone a 10/10. There is not one thing I would change about this case, I love it more then anything. It looks great and feels even better. I would highly recommend this case to anyone who is in the market for a new case. Not only are you buying a great case, you are buying it from a great company that is willing to go that extra mile and help you out when it is needed, whether it is a return or replacement, and this type of customer service just gives me that little extra push to buy Seidio then any other company.
Click to expand...
Click to collapse
Looks nice man love the otter box defender keeps the ports covered . I was thinking about the convert combo looks cool tho heard bad things about the rebrand from breast buy folks said it was cheap feel and broke at times for folks camera flap was kinda gay folks were sayin it had a bad feel .
If u test the convert combo out let me know to me the otter box defender looks way and feels better then what breast buy has out sexy and smooth.
When trident and ballistic come out with the kraken and aegis from trident will be sweet and the tank from ballistic will be sweet .
Yeah, i like the port covers but on the otterbox case i had for less then a week, the port covers already started to rip before returning it which is a downside... thats why i like having no port covers, its in preparation of when it does fall off!
and just so you know, this is the Active Case, made by Seidio.
Agree 100% with OP. Returned Otterbox Defender (too bulky, hard to type) returned Otterbox Commuter (felt thin, cheap, low quality, rubber not tight)
Bought Seido rebranded as Platinum from Bestbuy same as OP (except mine is black rubber with white back.) Rubber is almost TWICE as thick as Otterbox, way tighter on phone and just feels much much better. Better grip, better weight (and +1 on appearance)
it was $37.88 at bestbuy, same price as my Otterbox commuter refund.
Totally satisfied, would recommend 100%, would buy this PT/Seido again tomorrow if I had to.
Edit...and no power slot cover which is a +1 since it eliminates the extra step pain in the a.. and seemed unnecessary anyway. Can of aerosol air blast removes and dust or lint from that port in 2 seconds
...nice upgrade from hero
I'm a Seidio fan.
The only problem I ever saw personally with the active case was the corner pieces breaking easily. I had a couple of them and experienced the same problem. Otherwise...nice case.
Related
Just wanted to see if anyone has any of the Case Mate series cases for the Evo 3d? I was thinking about getting the Tough case, but from a video review on youtube, the case apparently has a random port on the bottom...
http://www.youtube.com/watch?v=mskLfmXEh0Y
Where I have found them online:
http://www.mobilecityonline.com/wireless/store/productdetail.asp?productid=28094#section10
http://www.wirelessground.com/htc-e...3d-case-mate-tough-case-black&channelid=FROOG
Currently have the Defender, but DAMN its bulky
I will never buy another case mate again
Sent from my Nexus S 4G using XDA App
mattfmartin said:
I will never buy another case mate again
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
Please fill me in lol
i have a casemate and i have been using this badboy since sept! i use this on my evo 4g over my seidio rugged! and i am rough on my ph and dropping it and this casemate is tough! also slides in and out of a pant pocket real good!
Sent from my PC36100 using XDA Premium App
HTCRALEIGHFAN said:
i have a casemate and i have been using this badboy since sept! i use this on my evo 4g over my seidio rugged! and i am rough on my ph and dropping it and this casemate is tough! also slides in and out of a pant pocket real good!
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
Maybe I will have to reconsider, I would still like to see some more people weigh in. I have the OB Defender right now, and its excellent protection wise just a bit bulky...
The convert from seidio/BB is pretty awesome two good cases plus a nice clip. This is until I can get the ballistic case
Sent from my PG86100 using Tapatalk
I have the Tough Case, just delivered today. It's similar in design to the Otterbox Commuter -- a thin silicone base layer covers the entire phone, while a hard plastic shell snaps around the back, sides and corners.
Pros: The fit is absolutely perfect. The silicone layer over the buttons is just the right thickness -- the power, volume and camera buttons are all covered, but their function is not impeded in the slightest. I was particularly delighted by how well the camera button works, no interference with function or sensitivity at all.
Around the front edge, the silicone layer rises a few millimeters above the screen, so you can comfortably place the phone face down without worrying about scratching the glass. Similarly, the camera lenses and flash are deeply recessed on the back, with perfectly sized openings around each (which, IMO, is how the lenses should've been on the phone itself). You can drag your phone across concrete with no worries, if that's the kind of thing you're into.
The hard plastic outer layer has a smooth matte coating that makes it feel more like silicone than hard plastic, giving it a very nice feel in the hand. It's also covered with a raised, textured pattern, making the phone very unlikely to slip out of your hand. By contrast, the Otterbox Commuter I briefly had on my Hero had a plastic outer shell that was slick and shiny, and the phone slipped out of my hand twice within the two days I left it on (which is why I used it only briefly).
Cons: My only real complaints are aesthetic. I really like the slim, refined look of this phone, and the grippy, textured, matte black surface of this case, while very protective and easy to hang on to, is a tad inelegant, giving the phone more of an industrial feel. It also adds a bit of bulk, which was immediately noticeable when I pocketed the phone with it on (although I will say it's positively svelte compared to some of the other cases I've seen pictured on this forum). The phone does also feel noticeably heavier with this case on.
In response to the OP, the case does have a couple of mysterious ports at the bottom. One lines up with the slot you use to pry the battery cover off, while a smaller one lines up with a tiny hole just to the left of the other (edit: duh! that's the mike, thanks minieod). I don't know why those are there, but they don't do any harm.
Overall, I'd say thumbs up. If you like the basic design of Otterbox cases but want something slimmer than the Defender and easier to hold than the Commuter, this is probably your best choice.
I have the casemate "barely there" case on my OG Evo. I have been using it since shortly after launch and it has been just the right amount of protection without adding a lot of bulk. I keep my phone in a pocket with nothing else so that case helps with day to day wear and more importantly it makes it so the camera glass doesn't touch the table when the phone is laying on its back.
I am thinking of picking up an Evo 3d for my girlfriend in order to replace her dying palm Pre but she is pretty rough on phones. She drops hers a lot and throws it in her purse with keys and change and stuff. The thought of getting her a "glass slab" style phone frightens me. I will probably pick up a barely-there case for the Evo 3d if I get it for her. It's weird that they don't list them on their site but that mobilecity site seems to have them in a few colors for $15. That's a good price IMO and my last one came with a free screen protector. Hopefully that will be enough to protect her phone.
I guess I can also cancel the insurance on my Evo and move it to her 3d if I get it since my account is due for upgrade and hers won't be for two years if i get her the 3d.
po96od said:
The case does have a couple of mysterious ports at the bottom. One lines up with the slot you use to pry the battery cover off, while a smaller one lines up with a tiny hole just to the left of the other. I don't know why those are there, but they don't do any harm.
Click to expand...
Click to collapse
that "mysterious hole" on the left of the phone you'll want to remain uncovered --- unless you'd rather not talk to anyone ---- thats the microphone
other than that i totally agree with you on the case - i got it at the sprint store and i LOVE it
i had the TPU case from the user who posted on here earlier in june (forgot your username sorry!) and sold them on tpu-cases.com or something like that... it was 8 bucks shipped, and great quality for tpu
but i tried this on when i was waiting at the store picking up my moms evo3d for her bday gift.... and decided to get the case-mate tough, and give her my tpu one
the casemate tough is sleek....i dont agree with po96 on the "inelegant" , because its pretty similar to the style of the battery cover on the 3d....
i like it a lot, and it feels very solid and protected....
i used to use the otterbox commuter on my evo4g and loved it, but i really hated the new design for the 3d....
minieod said:
that "mysterious hole" on the left of the phone you'll want to remain uncovered --- unless you'd rather not talk to anyone ---- thats the microphone
other than that i totally agree with you on the case - i got it at the sprint store and i LOVE it
i had the TPU case from the user who posted on here earlier in june (forgot your username sorry!) and sold them on tpu-cases.com or something like that... it was 8 bucks shipped, and great quality for tpu
but i tried this on when i was waiting at the store picking up my moms evo3d for her bday gift.... and decided to get the case-mate tough, and give her my tpu one
the casemate tough is sleek....i dont agree with po96 on the "inelegant" , because its pretty similar to the style of the battery cover on the 3d....
i like it a lot, and it feels very solid and protected....
i used to use the otterbox commuter on my evo4g and loved it, but i really hated the new design for the 3d....
Click to expand...
Click to collapse
PMed you, guess you might not have noticed. Anyways has anyone else seen these in a Sprint Store? I didn't see one at mine but maybe he was at a non-corporate store?
#Winning# said:
PMed you, guess you might not have noticed. Anyways has anyone else seen these in a Sprint Store? I didn't see one at mine but maybe he was at a non-corporate store?
Click to expand...
Click to collapse
hey sorry, my PM notifications are not working i guess
i am going to take some pics of mine now and post here
(note: these pics were taken on an Evo3D)
http://imgur.com/a/cCdel
neodorian said:
I guess I can also cancel the insurance on my Evo and move it to her 3d if I get it since my account is due for upgrade and hers won't be for two years if i get her the 3d.
Click to expand...
Click to collapse
get the 3d on her plan...swap the 3d to your number, and your evo to hers....at that time you both have two new activated phones...both are now eligible for the TEP
also, now you will have a 3d
minieod, nice pics. I was meaning to post some, but you were way more completist about it than I would've been.
The mystery hole at the bottom is for a lanyard.
i wish it would come with a holster
Phreddo said:
The mystery hole at the bottom is for a lanyard.
Click to expand...
Click to collapse
lol
no...its the microphone...when your mouth makes noise, that noise goes into that hole
po96od said:
I have the Tough Case, just delivered today. It's similar in design to the Otterbox Commuter -- a thin silicone base layer covers the entire phone, while a hard plastic shell snaps around the back, sides and corners.
Pros: The fit is absolutely perfect. The silicone layer over the buttons is just the right thickness -- the power, volume and camera buttons are all covered, but their function is not impeded in the slightest. I was particularly delighted by how well the camera button works, since the TPU case I was initially using basically disabled it.
Around the front edge, the silicone layer rises a few millimeters above the screen, so you can comfortably place the phone face down without worrying about scratching the glass. Similarly, the camera lenses and flash are deeply recessed on the back, with perfectly sized openings around each (which, IMO, is how the lenses should've been on the phone itself). You can drag your phone across concrete with no worries, if that's the kind of thing you're into.
The hard plastic outer layer has a smooth matte coating that makes it feel more like silicone than hard plastic, giving it a very nice feel in the hand. It's also covered with a raised, textured pattern, making the phone very unlikely to slip out of your hand. By contrast, the Otterbox Commuter I briefly had on my Hero had a plastic outer shell that was slick and shiny, and the phone slipped out of my hand twice within the two days I left it on (which is why I used it only briefly).
Cons: My only real complaints are aesthetic. I really like the slim, refined look of this phone, and the grippy, textured, matte black surface of this case, while very protective and easy to hang on to, is a tad inelegant, giving the phone more of an industrial feel. It also adds a bit of bulk, which was immediately noticeable when I pocketed the phone with it on (although I will say it's positively svelte compared to some of the other cases I've seen pictured on this forum). The phone does also feel noticeably heavier with this case on.
In response to the OP, the case does have a couple of mysterious ports at the bottom. One lines up with the slot you use to pry the battery cover off, while a smaller one lines up with a tiny hole just to the left of the other (edit: duh! that's the mike, thanks minieod). I don't know why those are there, but they don't do any harm.
Overall, I'd say thumbs up. If you like the basic design of Otterbox cases but want something slimmer than the Defender and easier to hold than the Commuter, this is probably your best choice.
Click to expand...
Click to collapse
So sounds like you like it better than the Otterbox. I am currently using the Commuter and love the feel of it (didn't feel slippery to me, has a nice texture) but hate the gap at the top. I am getting a new silicone layer from Otterbox to see if that one fits better. I think I might order the Tough Case as well and compare the two. Overall would you say its thinner than the Commuter?
I wish I could find the Tough Case in stores to give it a test before purchasing. I hate having to buy online and pay return costs for shipping if I don't like it but I guess that's what I'll have to do.
*update* Just ordered a Tough Case. There is a 20% off code for their online store: CM06-SP20. The online store has free shipping to US addresses and didn't charge me tax, so $28 total for the tough case (originally $35). Not bad! If I don't like it I can just pay return shipping. I might just keep it for a backup.
mrazzino said:
So sounds like you like it better than the Otterbox. I am currently using the Commuter and love the feel of it (didn't feel slippery to me, has a nice texture) but hate the gap at the top. I am getting a new silicone layer from Otterbox to see if that one fits better. I think I might order the Tough Case as well and compare the two. Overall would you say its thinner than the Commuter?
I wish I could find the Tough Case in stores to give it a test before purchasing. I hate having to buy online and pay return costs for shipping if I don't like it but I guess that's what I'll have to do.
*update* Just ordered a Tough Case. There is a 20% off code for their online store: CM06-SP20. The online store has free shipping to US addresses and didn't charge me tax, so $28 total for the tough case (originally $35). Not bad! If I don't like it I can just pay return shipping. I might just keep it for a backup.
Click to expand...
Click to collapse
eep - its on amazon for $30 + free shipping (which is free returns)
Anyone know if either the tough case or the barely there case will fit into the belt holster for the Seido Surface case(aka the plaitunum case at Best Buy)?
I'm currently using a TPU case in the Platinum holster because I like the added camera area coverage of the TPU case. I just hate the camera button covering of the TPU case.
The Case Mate cases look great but I really need a belt clip with them.
the wifes casemate shipped yesterday and will be here this weekend ill toss up pics
Sent from my PC36100 using XDA Premium App
I just recently got my 3vo and i need a case for it, never been a big fan of the otterboxes (just seem too bulky). I need a case that looks good and gives some protection.. i have a 2 year old that loves to play with my phone.. But im not sure what to get.. I dont work in construction or take my phone on any extreme sports, but i do forget my phone on my lap in the car all the time and go to get out and boom it hits the ground.. so i do need some protection..
So far this is the one im likeing
http://www.seidioonline.com/product-p/csk3hev3d-wh.htm
If you have a Best Buy near you, you can go there an try on some cases. They carry the one you posted too.
I had that case for my Evo 4G and I liked it a lot. Very nice case. The ones at Best Buy are named Pt, but they are made ny Seidio for Best Buy. Same exact case, just a different name stamped on it.
Sent from my PG86100 using XDA Premium App
The casemate tough case is pretty nice. It's not super big like the defender but its not slim either. But it looks nice, fits great and protects well. I got mine off ebay for about 22 bucks new. Well worth it. I also have the seidio active but prefer the tough case and haven't taken it off for the last 2 weeks or so except to clean it.
Sent from my PG86100 using XDA App
I'm still waiting for the Ballistic Case for the Evo 3D to make its appearance on their website; waiting on the HC version.
The CaseMate's look pretty good as well. I've seen good reviews for the Tough Case that they make.
However, SLM is correct. Go try out the Platinum cases at Best Buy before you take the plunge with the Seidio case. It costs $34.99 at Best Buy for the same Seidio one you're interested in.
I'll tell you from experience that I have the Platinum case (a.k.a. a rebranded version of the Seido Active case), and it's pretty sweet! Rumor has it that Best Buy will also be getting the Seidio 1900 mAh batteries as well, but they'll too be rebranded as Platinum. The case I got is excellent and slimmer than the Otterbox cases. It comes in two pieces. You have a silicone sleeve with a felt-like interior that wraps around the phone, and then you have a strong plastic skeleton that wraps around the sleeve. Although the case is great, there are a few things that I don't like about it. For one, if you keep your phone in your pocket like me, you'll start to notice pocket lint collect around the edges of the case. Also, it's sometimes hard to press buttons around the edges of the phone. For example, I use Swype, and when I have to manually type in a word instead of swiping, it can be difficult pressing letters such as P or A. I'll accidentally hit the O or S keys. But it does offer damn good protection. I've gotten so accustomed to the case that it's just weird to hold the phone without it. The case also protects the dual cameras in the back. I have no clue why HTC decided to have the cameras stick out, but this case offers protection for them. As far as my pocket lint issue goes, I think I might invest in a holster for the phone. I'm not sure if Best Buy sells the Platinum branded holster that is compatible with the Active case, but I'll look sometime this week and let you know. I use my phone as my primary music player, whether it's mp3s stored on the phone, FM radio, or Internet radio, and I think that having it on my hip instead of my pocket will be a little bit more convenient for me.
As far as cases go, I've only seen the Platinum case with the black skeleton being sold at Best Buy. Seido sells their Active case with different colored skeletons, but the sleeve still remains black. I'm kinda disappointed Best Buy didn't sell the burgundy skeleton. I think it would've looked nice on this phone (I'm a fan of dark red colors.). If you want something more rugged, Seido sells on their website the Surface case (a hard two piece plastic shell available with or without a kickstand) and the Convert case. If you plan on drunkenly abusing your phone or chunking your phone at the wall after a pissed off conversation, I recommend the Convert case. It's like a combination of the Active and Surface cases. The inner layer is the Surface case, and then it's wrapped with a silicone sleeve and skeleton like the Active case. It also has a detachable cover for the rear cameras. To top it all off, the Convert case comes with a precision-cut screen guard. I don't really need all that thickness and protection, but I would put money down that the Convert case holds up to its name. If you plan on getting an extended battery though, make sure you get an extended case since the regular cases won't fit with the extended battery door.
Anyway, I hope this helps. Good luck shopping for the right case!
I bought a silicon case with the wave. Protects camera, wich had to be protected since it sticks out. Also protects the other buttons and seems to fit well...
Its only 1,50 dollar so thats not a bad deal.
The TPU case is really awesome. It's on ebay and really cheap! Just search ebay for "evo 3d tpu case"
Only one downside, almost every 3vo owner has it
Red Body Glove case
I have the Body Glove case in red, and I like it a lot. It is a nice looking case.
I have no issues with mine unlike some others, but check out the pictures here:
http://forum.xda-developers.com/showthread.php?t=1141005
The available colors are Red, Blue, Gray, Silver, and maybe White too.
Thank for the info guys im going to head to beat buy today and check it out..
butterbuns said:
Thank for the info guys im going to head to beat buy today and check it out..
Click to expand...
Click to collapse
Sounds good, let us know what you decide. Bhambalek said they only have the black skeleton shell at his Best Buy. My local Best Buy only had them in white. Maybe yours will have both so you'll have options. Good luck!
Sent from my PG86100 using XDA Premium App
Just unpacked and put on my Seidio Active with holster, got the saphire blue from Versio Mobile on Amazon, 34.49 shipped.
Very nice case, fits very snug, like the inner skin and outer skeleton, holster is very solid. Only complaint, that the camera glass is not protected; probably order a carbon skin so I can throw some protection on that glass. Had a TPU on her since day one and glad I upgraded to this one.
Delano.888 said:
The TPU case is really awesome. It's on ebay and really cheap! Just search ebay for "evo 3d tpu case"
Click to expand...
Click to collapse
I also like and recommend the TPU Skin Cover Phone Case for HTC Evo 3D http://www.amazon.com/TPU-Cases-Flexible-Sprint-Retail-Packaging/dp/B0053NWDO0
I have the Sedio Surface case and am happy with it. Decent protection and it has a kickstand also.
I posted a review on sprintusers, but dont know the policy here about linking to other forums.
i picked up the PT Cruiser case yesterday, i was able to get the black and white one that i liked.. Now i first off the bat i really like the look and feel of the case, but i dont like how the phone fits in the rubber sleeve, its not a real snug fit. So i can see pocket lint and other things easily able to get inbetween the phone and the rubber side, but other then that i like it so far.. Its still a lil early to make a final decision on the case..
But again thanks for everyones responces, i have to say this site really does rock!!
one word: otterbox defender. Ok so that was 2 words.
I have four requirements:
(1) Decent protection all around except for screen.
(2) Protection for the camera.
(3) Must lie flat and not wobble when typing w/phone on table.
(4) Must not make the phone significantly fatter (otterbox is OUT).
Anyone have any suggestions? I actually like the gel case from Sprint but it doesn't protect the camera.
Mike
i like seidio case the best
i've tried all sorts of cases and I keep coming back to my casemate tough case, can't go wrong with that one. It's not that bulky and offers just the right amount of protection without having your phone inside a vault like the defender.
Seidio Active or Platinum Cruiser. I had the Seidio on my Evo 4G for a year. Get the holster from Seidio to prevent the lint issue and clip it inside of your pocket. Something that nobody mentioned is that the rubber bezel allows you to set the phone face down without the screen contacting. That also makes it slip resistant and prevents an unattended ringing phone from vibrating off of the desk. Not too much bulk either.
Sent from my 3vo using XDA Premium App
Just ordered it tonight and will post pictures when I finally get it. That was my favorite case, with the standard battery, for my s4 when I had it. Slim, rubber inside, hard shell outside, rubber ribs for grip and anti slide on the back. It never interfered with a tempered glass screen protector, as long as you installed it perfectly centered in accordance with the edges of the frame, not the home button. It's on sale, this weekend, and I'm guessing until cyber Monday, for five dollars off and free shipping via USPS. http://www.speckproducts.com/smartphone-cases/samsung/candyshell-grip-for-samsung-galaxy-note-3.html
Nice find. I like Speck. They make quality stuff.
Sent from my SM-N900P using Tapatalk
Never used a speck case before I like the design ..how does it. Compare to a uag or otterbox commuter in terms of size/protection?
Sent from my SM-N900V using Tapatalk
It's similar to a UAG in terms of protection. One layer silicone inside lining, attached to the plastic exterior.
Different then a commuter with a wrap around silicone lining with a separate exterior hard lining
Sent from my SM-N900V using xda app-developers app
It's smaller than the commuter. When you install or remove it, the case is all one piece. The layers don't come off. Easy to put on or take off. Shouldn't need reaming mod for most headphones. Won't slide when placed on a surface back down. Good amount of lip protecting the screen and camera. The rubber layer is slightly harder density than rubber on otterbox.
Def glad to see it out for the Note3. I plan on ordering this when 12am hits for cyber monday from the Speck website. Just wish they had the white and black version like they usually do.
I had a Speck candyshell (non-grip) for the iPhone 5s and loved it. It was hot pink and white but it was only $5. Not digging the Spigen Neo Hybrid because its way to slippery for a phone this big. The issue I see here is that it's $40.
Edit: Speck has a holiday deal knocking the price down to $35.
Edit 2: The case is now $30 after 25% off.
I love my tech 21 for my note 3, but would be interested in the Speck. I like the candyshell over the Candyshell grip though
Looks like black is out of stock.
Sent from my vzw note 3
Glad I ordered mine before making this post. Hopefully I'll get it before Friday. I'll post pics when I get it. Lots of close ups so you all can see the details.
Previous reply was rejected. I'm not going to type out all that again. My pictures and a video turned out crappy and out of focus. Long story short. This case protects better than just tpu but less than otterbox defender. It's slender and fits snug. The same quality you can expect if you've ever owned a speck case before. Grip ribs help with sliding but won't make it an effort to get out of a pocket like a glossy tpu or silicone case. Quality of build and function I give it five out of five. It's not cheap but you get what you pay for. This case will definitely be my daily driver!
gcforreal said:
Never used a speck case before I like the design ..how does it. Compare to a uag or otterbox commuter in terms of size/protection?
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Tight fit!
They are better at excluding dust than any other case in my experience. If they used a plug to cover the USB/earphone jack openings they would be better than anything else out there for this kind of protection.
That's a good thing too as being harder to put on and take off means intrusive dust could potentially grind on the finish, etc.
Bad news for battery swappers though.
Protection is good, you can literally toss it at a brick wall repeatedly and not worry about damage or even the case coming off in between throws. The grip is also far better at not showing wear/scratches from sitting on tables, etc. like the normal version. The high gloss back of the normal version will reveal marring/scuffing of sitting on tables, countertops, etc. in relatively short order.
Bulk-wise they fall in between a minimalistic TPU (Diztronic, Bounce, Tudia, etc.) and UAG with protection on par with UAG.
Its asking price is fair for the quality received.
Just got mine today and fitment, quality, etc. is identical to past Speck products.
The buttons are covered, retain their clicky tactile feel and are no more difficult to depress than the naked phone! Fit is very snug, have not tried to take it off. It feels identical in hand to the candyshell grip that I use on my HTC one. It adds very little thickness, very similar to a TPU with far better drop protection. Even with a TPU I cringe if the phone slips, no worries here. Cutouts are well aligned and very tight. The S-pen cutout is quite tight requiring a fingernail to pull it out.
The camera is recessed sufficiently to prevent issues with setting down/dropping back first on a hard surface. The overall feel is it's well thought out and does not look thrown together like some other cases that were rushed to production. Worth the $$$ and I got another five bucks off ($30 total) by using a CNET coupon code. I always Google for codes when I see it on a website at checkout. Not sure if it's still valid and the black grip is OOS now...
Amazon doesn't even have this case (yet) and to get it for $10 off is a no-brainer!
Its a nice case i love the way the button, might have the best feedback but this case is worthless, within a few hours scratches will start to form and by the 2nd week you already want to replace because of the scratches. The darker the case the faster the scrtches will appear
I didn't notice scratches with my s4 and I had the case for months. Even so, it's better for the case to get scratches than the phone.
oscarthegrouch said:
I didn't notice scratches with my s4 and I had the case for months. Even so, it's better for the case to get scratches than the phone.
Click to expand...
Click to collapse
then you must carry it in a cloth because everyone knows specks cases scratch within like 1 day like they've been in a warzone. they are great cases but they don't keep the look.
$40 for that? Ouch. Looks like it should be $19.99 to me.
Yeah I keep mine in my pocket with nothing else in that pocket.
I never liked the Speck Candyshells. They scratch up like it's no one's business. They do look real good when you take it out of the package though.
Best thing is that they will replace their cases without any questions asked
Sent from my SM-N900T using Tapatalk
Hey guys,
Been using my DNA for the past year without a case and finally cracked the screen. Needless to say, after I repair it I'll be getting a case.
My issue is, most of the cases I see for the DNA are either downright ugly, or add a lot of bulk to the phone. I love how slim it is without a case, but obviously, with my clumsy hands should get one for protection purposes.
So, what cases are you guys using?
I currently have a generic wannabe case. It's got a plastic snap on cover, then a rubber casing around that. It's similar to what I'm getting. I had a Seidio case for my Thunderbolt, and was pleased to find they make the same thing for the DNA. They call it "Dilex" now. But you can get it on Ebay for 10 bucks less than Amazon as the "Active" case. It has a two-piece plastic cover, then a rubber cover, then an exoskeleton. AND it has a kickstand. I loved my Tbolt kickstand. I had my Tbolt for 3 years and it stayed in outstanding condition using the Seidio. I'm definitely a repeat customer.
Here's Seidio's page about the case:
http://www.seidioonline.com/seidio-htc-droid-dna-dilex-s/8532.htm
On Amazon, the price varies from like 28 bucks to 35 depending on color.
http://www.amazon.com/Seidio-CSK3HTDDAK-GR-DILEX-Metal-Kickstand/dp/B00B1N08MA
Here it is on Ebay:
http://www.ebay.com/itm/Seidio-Acti...t=US_Cell_Phone_PDA_Cases&hash=item485093fbbf
If you find a difference between the "Dilex", and "Active", feel free to educate me. I haven't found a difference yet. I just figured Active was the old name.
tstorm004 said:
Hey guys,
Been using my DNA for the past year without a case and finally cracked the screen. Needless to say, after I repair it I'll be getting a case.
My issue is, most of the cases I see for the DNA are either downright ugly, or add a lot of bulk to the phone. I love how slim it is without a case, but obviously, with my clumsy hands should get one for protection purposes.
So, what cases are you guys using?
Click to expand...
Click to collapse
mdphoenix said:
I currently have a generic wannabe case. It's got a plastic snap on cover, then a rubber casing around that. It's similar to what I'm getting. I had a Seidio case for my Thunderbolt, and was pleased to find they make the same thing for the DNA. They call it "Dilex" now. But you can get it on Ebay for 10 bucks less than Amazon as the "Active" case. It has a two-piece plastic cover, then a rubber cover, then an exoskeleton. AND it has a kickstand. I loved my Tbolt kickstand. I had my Tbolt for 3 years and it stayed in outstanding condition using the Seidio. I'm definitely a repeat customer.
Here's Seidio's page about the case:
http://www.seidioonline.com/seidio-htc-droid-dna-dilex-s/8532.htm
On Amazon, the price varies from like 28 bucks to 35 depending on color.
http://www.amazon.com/Seidio-CSK3HTDDAK-GR-DILEX-Metal-Kickstand/dp/B00B1N08MA
Here it is on Ebay:
http://www.ebay.com/itm/Seidio-Acti...t=US_Cell_Phone_PDA_Cases&hash=item485093fbbf
If you find a difference between the "Dilex", and "Active", feel free to educate me. I haven't found a difference yet. I just figured Active was the old name.
Click to expand...
Click to collapse
I have a red Seidio Active (silver kickstand) that I've had since the 3rd day after I got my DNA and it's great. My only complaint is it does feel a little thick and I only use the kickstand as a novelty. It can't reach the wireless charger when propped up and I don't need to charge it other than overnight when I'm sleeping. I had a UAG on my Galaxy S3 and I desperately wish they had a version for the DNA as it offered the same protection but wasn't quite as bulky. The Seidio is top quality though.
Otterbox commuter series, I've been using them for 4 years now and no broken phones or no cracked anythings
Hard thin shell on the outside with a nice durable silicon/rubber on the inside (better IMO that the defender series cases) cost is around 35-40$ however if it breaks (which is extremely unlikely) just take a pic of the broken case and they send you a new one no charge AFAIK
Never needed to get a replacement as these are solid quality cases can't go wrong with otterbox
Sent from my HTC6435LVW using XDA Premium HD app
I have been using the diztronic case for over a year and it doesn't add a lot of bulk its basically a tpu case but has a matte finish. I like it and I tried the otter box defender case but it was so bulky I went back. I think its one of the better cases if you want something without bulk but I would think the screen would crack if the phone took a direct hit on the screen. Though I haven't had any cracks with it after a year and I drop my phone every now and then.
Sent from my Nexus 7 using XDA Premium 4 mobile app
This is not much help, but hopefully you can go another year "naked". I have no case on my phone and love it. My wife has an S4 with a case (I forget the brand, but it has the rubber and then the hard plastic over it), and I think her phone is bulky.
Coming from a Droid 2, 3, and 4, most anything smaller that a 2x4 is small but the DNA has spoiled me.
I have cracked screens with and without a case. Currently naked and love it!
I use an Incipio Dual Pro. I love it.
I use the seido surface. Its raised a little bit above the screen which makes me a little less worried if I drop it, although it's still not as protected as it would be with something like an otterbox. It doesn't add any bulk to the phone, and doesn't ruin the shape of the phone so it looks almost the same as it does with the case off. I would just use the phone naked but it just feels like it's going to slip right out of my hand when I do that.
Sent from my Droid DNA using Tapatalk
I'm using the Seidio Surface too, I love the case, slim, doesn't add bulk, I have drop it a few times and screen still intact, plus the case has a polycarbonate feel, feel great on hand.
I use a otterbox defender and it is kind of bulky; but I am a metal roof salesman and use my phone extensively for work; pictures, pitch guage, ect... If my phone gets dropped on, or off, a roof it's chances of breaking are very high. I like the belt clip as well.
I use the Sedio Dilex with the built in kickstand. I miss my Thunderbolt, hahaha. Seriously solid case. :good:
FYI, you might find better/more info in the Accessories Forum..
Personally I am using the BodyGlove Dropsuit. It is inexpensive, thin, and seems to protect pretty well. I have dropped my DNA a few times, even once right on the corner on hard tile, and I don't have a scratch..
http://forum.xda-developers.com/showthread.php?t=2321473
max protection
I use a otterbox defender and it is kind of bulky; but I am a metal roof salesman and use my phone extensively for work; pictures, pitch guage, ect... If my phone gets dropped on, or off, a roof it's chances of breaking are very high. I like the belt clip as well. My last phone fell two stories to concrete and because of the otterbox defender it suffered no damage. If your job is not so dangerous I recommend the commuter series by otterbox. It is much slimmer and provides protection very well.
I use the imak snap on hard plastic case, open top and bottom.. A phone this sleek and sexy shouldn't be hidden under a huge monster truck tire , otterbox-type case.... Eww
I had the worst for about 8hrs
Skinomi TechSkin
I didn't read the fine print, all it was is a 15$slippery sticker.. I think I'm gonna get the seido a few are mentioning.. just got a warranty replacement, the ear piece was blown, I figure it's someone here's old one
Æaa\../
Got myself a Ballistic from Amazon, it's not bad
I've used seidio surface, and a low cost s-line case. I now use the body glove DropSuit. :good:
I was using seidio surface, now rocking a diztronic and love it
Sent from my HTC6435LVW using xda app-developers app
I use a Otterbox commuter, but now I switched to nothing since I really hate the feel of the bulkiness
Hey fellas!
I am looking for a premium looking case for my nexus 6.
My phone is white if it matters.
I did like a lot the Nilkin slim border, but its out of stock everywhere.
Also i have found this:
https://www.ebay.com/itm/Luxury-Sli...hash=item41939eb983:m:m2afeTHn0qE_nI9hygZ9iVg
Black aluminum borders.
Besides that, im looking for something that will give me a nice grip yet still make the phone look elegant and aesthetic.
Thanks!
I have that. It looks okay, but the quality is crap. I got rid of it right away.
My favorite Nexus 6 case is this one:
Ringke FUSION [Dust Cap/Drop Protection][CLEAR] Shock Absorption Bumper. (Available on Amazon)
It adds minimal bulk and fits like a glove.
I bought this case about 6mo ago, and have been very happy with it: https://www.ebay.com/itm/152687543728 (Not affiliated with the seller, just a happy customer)
Back is a clear, hard plastic (poly-carbonate?) and the "lip" is a firm TPU-type material. I've dropped it dozens of times with zero problems.
I've used the "S-shape" type cases for other phones in the past. A simpler, less "high-end" look, but they have tiny little "nubs" at the edges that give excellent grip. (Zoom in on pics to see):
https://www.ebay.com/sch/Cases-Cove..._from=R40&_nkw=nexus+6+s+tpu+case+-"nexus+6p"
Guyinlaca said:
My favorite Nexus 6 case is this one:
Ringke FUSION [Dust Cap/Drop Protection][CLEAR] Shock Absorption Bumper. (Available on Amazon)
It adds minimal bulk and fits like a glove.
Click to expand...
Click to collapse
I have this Ringke also and it is a good case, but I wouldn't consider it premium. It does provide adequate protection for minor bumps and falls. It has a large enough lip that my tempered glass screen protector doesn't scratch if I place the phone face-down on a table. The clear TPU yellows over time so it looks dingy though. Depending on how frequently you charge or use a headset, the dust caps can be annoying (of course they are easy to snip off the case if you like.)
Overall it is a very good case and the one I use most of the time, but particularly because of the yellowing of the clear plastic, I can't consider it a premium case.
I use a Spigen slim armor. Very nice looking and protects well. I had together it directly from Spigen though. I tried ordering one from a discounter and they send me a fake. It literally didn't even look like the real thing and lacked the kick stand and didn't even fit properly. They just printed Spigen on some random vaguly similar case and tried to pass it off.
Have had a number of cases over the years and I'm none rival the quality, feel, build, and just plain sexiness of the Seidio Dilex Pro. I'm the best kickstand case as the kickstand itself is metal as well as magnetic, it's also very sturdy. I went thru 2 Spigen Slim Armor kickstand cases after the plastic kickstands broke off then I discovered this beauty lol. Also rocking a Dbrand skin and no problems with the fit. Also the feel of the outside lip is great, more than enough to sit it face down, but formed and angled perfectly as to not in any way hinder using the screen. Seidio is also a big name company so the price is higher @ $29.99, over your run of the mill ebay cases, but as the famous saying goes, you get what you pay for lol.
https://www.amazon.com/Seidio-DILEX-Metal-Kickstand-Motorola/dp/B00S6TA3RW
Also might add that the way the metal kickstand is attached the area is flat which means sitting it on a table it will stay put instead of rocking back and forth lol. The butter shell of the 2 pieces is also covered (or made?) out of something that is pretty grippy, no slick plastic or rubbery TPU to deal with, using it for over a year in construction sites, factories, and other outdoor/dirty jobs it doesn't hold dirt or sweaty skin oils compared to others I've used, I wash mine bout once a month in hot water with dish soap and no warping, deforming, or most of all, fading, still black as the day I got it. And one last awesome thing that's soo small to be easily looked over but makes a huge difference when case makers don't do it is the side buttons, each one is individual, precision molded, and have a very satisfying feel when depressing them. It may be a tad bigger compared to bumpers or extremely thin shell cases which are barely a step up over a full Dbrand or (can't remember the other skin company) skin lol, I found myself loving the size, it's not full on OtterBox, but it still is thin enough to let me use it one handed which is whenever I'm doing anything but typing lol.
::Edit:: Oh yea, it comes in Black, Blue, Red, and White. Seidio also makes a Surface case with the metal kickstand as well and I'm sure it's just as high quality of a product I have not tried it myself and cannot attest to it's build, here is an Amazon listing tho if you would like to see it, it is one that includes a belt holster tho there are listings without the holster for cheaper.
https://www.amazon.com/Seidio-SURFACE-Kickstand-Holster-Motorola/dp/B00S6T9YTK