I have tried for the past 4 hours to install the AOSP MIUI ROM. I have tried a newer recovery, a mtd kernel. No luck. I install the rom in CWM 2.5, but it boot loops at that point and states that the sd card can not be mounted. It then counts down to 20 and resets over and over. Can anyone shed light and provide steps?
Well the first thing I would do for yourself is to Odin back to stock using the 2.2 pit file as well as odining the stock 2.2 ROM. Make sure you repartition as well so that everything is formatted!!! This will solve SO many issues and give prospective forum members a place to start with your problems you are having.
2.2 Pit file - http://download180.mediafire.com/09z...atlas_v2.2.pit
2.2 stock froyo - http://www1279.megaupload.com/files/...EL.tar.md5.tar
I am going to assume you have odin and not link a download simply for the fact that if you have read ANYTHING pertaining to CM7 or MIUI in our forums you should be well aware of how to use it.
After wiping you will need to flash the modem you want via odin. They are located in the sticky in the dev thread.
After this you will need to flash the CWM that is located in the CM7 or MIUI threads themselves.
here is a link : cwm3_fixed_for_cm7-ODIN.tar
Use odin to flash it, then simply flash the AOSP package of your choice from the their respective threads here in the forums.
TedLWJR said:
I have tried for the past 4 hours to install the AOSP MIUI ROM. I have tried a newer recovery, a mtd kernel. No luck. I install the rom in CWM 2.5, but it boot loops at that point and states that the sd card can not be mounted. It then counts down to 20 and resets over and over. Can anyone shed light and provide steps?
Click to expand...
Click to collapse
Also worth noting that I missed in the first post. You mentioned CWM 2.5....sadly this will not work nor will it work with any other CWM floating around. The ONLY way currently to flash it is with the CWM I linked above. These are from JT and fixed to work with the AOSP ROMs.
from JT himself
*** The recoveries attached below are ONLY to be flashed on a BML ROM, ie: touchwiz based ROM or earlier, non-MTD CMx ROM. DO NOT FLASH THEM IF YOU ARE CURRENTLY ON CM7 OR MIUI MTD ROMS! ***
Click to expand...
Click to collapse
Thank you, I tried to use the new recovery provided by JT, alas it did not work for MIUI, I will try again tomorrow when spirits are higher, I usually start from DL09 and OTA my way back to ED04, Do i have to stay on EB01 or can i use ED04, and yes i am familiar with odin. Thanks again my friend.
TedLWJR said:
Thank you, I tried to use the new recovery provided by JT, alas it did not work for MIUI, I will try again tomorrow when spirits are higher, I usually start from DL09 and OTA my way back to ED04, Do i have to stay on EB01 or can i use ED04, and yes i am familiar with odin. Thanks again my friend.
Click to expand...
Click to collapse
Don't quote me.... It shouldn't matter (EB01, ED01, ED04...etc) All that is needed is the updated recovery to run the package install. The package will format your filesystem so your version should not matter. If you are referring to the modem... its your preference. I am on EC01 but last time I was on like ED04 or something...
Might also try flashing CM7 first, booting in, then flashing MIUI since they use the same BML format.
Still no dice, I'm sick of trying this, I have Odined back to 2.2 around 10 times already. A good write-up is definitely necessary.
What kernal are you loading with ED04, etc.. before trying CM7?
Stock as i think i read that the rom includes a kernel, should i try a MTD kernel and then flash CM7/MIUI?
No, I was just making sure you weren't loading any voodoo kernals.
When I had issues loading MIUI, I went all the way back to the DI01 all in one rom (odin) then DL09, then CWM Fix all (3.x), then MIUI. Load the rom before you load the MIUI cwr.
I'm having major problems too. I've tried about every method to get onto CM7, but I either end up with boot loops or get stuck on the GalaxyS/CM7 boot screen for a long time (over 30 minutes).
I've started from almost every platform (stock back to DI01, comrom, evil, ....)
Used JT's cwm and still no go. I've rebuild my partitions in both odin and heimdall, I don't know what else to try myself.
I've gotten to the same place with the Galaxy S and Cyanogen screen, help is appreciated.
Sent from my SCH-I500 using XDA Premium App
im in teh same situation. ive tried doing everything i can find and i NEED miui on my phone.
haha seriously any additional help would be appreciated
Related
Tried to flash a custom ROM for the 15th time or so, with the same result. E: Can't Symlink /system/bin/su
Failure at line 16
Have researched this error, thought I had it figured out. Obviously not. Feel like an idiot. I never had any problems loading custom ROM's on 2.1.
BTW, I am rooted thru S1Click, have backed up thru nandroid and Titanium, have installed 3e custom recovery, everything I have read I could be doing wrong I have changed. I have tried different makers- Bionix, Axura, Eugene, all with hte same errors, so I know it's not just the ROM file.
What am I doing wrong here?
I don't know.. but let's save everyone the trouble of answering this and let you odin back to stock.
It might be something you flashed etc..
tried that too. tried loading these ROM's right after rooting and adding ROM manager. It's just weird that know one can answer a specific problem like "failure at line 16". Surprised there isn't an answer to look up based on the Line 16 error.
I'm not pointing any fingers, because I don't know the answer either. Just know that if you you give me one of the basic replies, like try ODIN to stock, I've probably tried it.
What are you odining to? I've always had success going to back to jfd. Doesn't seem to be any issues with rooting or rom manager.
Trigger + Overstock = Awesomeness
yep. Odining to jfd.
One thing is that I always install 2.2 via mini-kies before attempting to install custom ROM. Reason being that for whatever reason, the super one click just does not want to install on 2.1. Could that be part of the problem?
Here's what I do and it works every time for me.
1. Odin to jfd
2. Root then install rom manager
3. Flash clockwork recovery
4. Download rom of choice to internal sd
5. Flash rom thru clockwork
6. Enjoy
That has never failed me.
Trigger + Overstock = Awesomeness
Check This Out....Tell me If It Helped You
http://forum.xda-developers.com/showthread.php?t=848737
I did it. FINALLY.
Loaded Simply Honey 2.5, and this thing is FAST and awesome. Such a cool ROM. I was so pumped when it actually worked. Thanks for all the help, guys. And all the great developers that put in hte time and work to make our phones what they should be. Good job, guys.
Glad you got it working. The first flash is pretty awesome.
Trigger + Overstock = Awesomeness
I had this happening yesterday, find and Odin Eugene's froyo that doesn't brick, followed by a stock Odin flash with checking repartition the second time to fully clear the problem, or it will happen again probably the next time you go to flash a rom.
Sent from my Loki powered Vibrant via the XDA App
Br1cK'd said:
I had this happening yesterday, find and Odin Eugene's froyo that doesn't brick, followed by a stock Odin flash with checking repartition the second time to fully clear the problem, or it will happen again probably the next time you go to flash a rom.
Sent from my Loki powered Vibrant via the XDA App
Click to expand...
Click to collapse
This is the safest way and the best way.
I have been trying my best for the last 3 hours to flash a rom on this damn phone. I have rooted it and installed a custom Recovery. However ever time I flash any ROM to this phone through clockwork I get an error in clockwork mod stating assert failed and gives a bunch of code and then says status 7. What the heck is going on here ? I have flashed roms for years using this site and I have never had so much trouble. Can someone help me PLEASE ?
If you are getting status 7,you should Odin back to stock..then read the thread for the one you want to flash.
Sent from my SCH-I500 using XDA App
This is NOT development. This belongs in the Questions and Answers, or General Section.
Sent from my Fascinate with MIUI Gingerbread
Shakes is right. Odin back to stock (check md5 first), root, make sure you install the right version of clockwork. There are at least two flavors of CWM 4.0, two of 3.0, and something like four of 2.x. After you've figured the right CWM, DL your chosen ROM and run a checksum to make sure the zip is intact. Then flash away. If you break/brick, Odin back to stock again. Repeat until you get a config you like.
RE:
Okay I am trying to flash this build http://forum.xda-developers.com/showthread.php?t=1168068. I have no idea how to on this device. I have went back to stock 5 or 6 times. And started over. Can you guys please tell me how I would flash this after flashing CWM and rooting ?
cjegan2008 said:
Okay I am trying to flash this build http://forum.xda-developers.com/showthread.php?t=1168068. I have no idea how to on this device. I have went back to stock 5 or 6 times. And started over. Can you guys please tell me how I would flash this after flashing CWM and rooting ?
Click to expand...
Click to collapse
What rom (which stock) were you running before? Even more important what kernal? And which CWR? Before you flashed back to stock were you running a voodoo kernal? and if so did you disable lagfix? I had the same problem and it was that lagfix was still enable.
My apologies if this has been asked before, but I've spent hours searching and think I've done a better job of confusing myself, than answering my question.
I've rooted my wife's Samsung Fascinate, using Super One Click and removed all annoyances such as the Verizon bloat ware and got add blocker installed, etc. The point on doing so, was also to improve battery life, backup the ROM and some of the other associated advantages with rooting. One of my main goals was to also install a custom ROM on her phone, as the factory ROM is very flaky. It receives emails, then doesn't. It sends a text, then can't minutes later. It's been a great phone HW wise, but just junk as far as the OS.
Thus far, all attempts to backup the factory (modified) ROM has failed, which evidently is part of the limitation with the stock ROM. At this point, she's so frustrated (me too) with her phone, that it's time to get serious.
So, my confusion stems from varying reports regarding what the proper steps are to install a new ROM. On my Thunderbolt, I simply used CWM to install and backup/restore my ROMs as needed. This doesn't seem to be the case with the Fascinate and there's varying reports of whether this can even be done if Super One Click was used.
Has anyone had experience with flashing new ROMs after the phone was rooted and if so, by what method?
Her current ROM details are:
Firmware
2.2.2
Baseband
S:i500.04 V.ED05
Kernel
2.6.32.9
Build
SCH-I500.ED05
Thanks in advance.
stock roms,radios, and recoveries are flashed via odin. custom roms are flashed via the appropiate cwm for that specific rom.
example: lets say you want cm7
you would odin cwm4 recovery fixed for cm7(pda function only)
three finger boot into recovery
wipe data,cache,dalvik
install cm7 zip
profit
most stock roms and powewashed gingerbread rom are .tar files and need to be flashed in the pda funtion of odin.
then use odin again to flash the appropiate cwm, such as cwmall.tar, which can be found in the pwgb thread(op).
basically just remember zip files are flashed in recovery, .tar and md5 files are flashed in the pda function of odin and you will be set!
droidstyle said:
stock roms,radios, and recoveries are flashed via odin. custom roms are flashed via the appropiate cwm for that specific rom.
example: lets say you want cm7
you would odin cwm4 recovery fixed for cm7(pda function only)
three finger boot into recovery
wipe data,cache,dalvik
install cwm zip
profit
most stock roms and powewashed gingerbread rom are .tar files and need to be flashed in the pda funtion of odin.
then use odin again to flash the appropiate cwm, such as cwmall.tar, which can be found in the pwgb thread(op).
basically just remember zip files are flashed in recovery, .tar and md5 files are flashed in the pda function of odin and you will be set!
Click to expand...
Click to collapse
Okay, that makes a lot more sense now. Thanks for the quick reply.
correct me if i'm wrong but when flashing the cwm fixed for cm7, the 3 finger method does not work.
ibsk8 said:
correct me if i'm wrong but when flashing the cwm fixed for cm7, the 3 finger method does not work.
Click to expand...
Click to collapse
it does until the rom is flashed, then you have to long press the power button and select reboot recovery...at that point your no long in cwm4 fixed for cm7. once the bml to mtd conversion takes place it's converted to cwm 5.x.x.
droidstyle said:
it does until the rom is flashed, then you have to long press the power button and select reboot recovery...at that point your no long in cwm4 fixed for cm7. once the bml to mtd conversion takes place it's converted to cwm 5.x.x.
Click to expand...
Click to collapse
I never could get to the ROM flashing part. Every time I tried I got the same set of errors as when trying to backup the original ROM. I did manage to get the CWM 4 fix applied through ODIN and it said successful, but nothing really changed and my attempts to flash the new ROM still failed.
I searched around this forum and others and found another file to flash and things went very badly. The flash was moving super slow and I left the phone, so I wouldn't be tempted to do anything stupid and after an hour, it was at the same point. When I rebooted the phone, I got a sad face icon only. No Samsung logo or anything.
Luckily, I was able to re flash the stock rom, but after messing with it for 4 hours and getting nowhere, I decided the stock ROM was good enough for now. I have no idea why this phone is so pesky and read how some folks had to ref lash the stock ROM, before being able to flash a new ROM. I made one final attempt to do so and got the same error as the first time, so that was enough for that day. I don't recall exactly what the error said at this point, but I had blue text, followed by orange, which I think said something to the fact that is was unable to verify the package, followed by red text showing the failures.
Sorry there's no more detail than that for now. I may try this again in the future, but as mentioned this is the wife's phone, so I can't take nearly the liberties with it as I could my own.
If anyone has any ideas on what I may be able to try next, that would be great. If not, I may keep digging on this forum (a very helpful place indeed) and see what the options may be.
Thanks everyone for your help.
refer to section 3 of my guide and follow those steps. for some reason certain fascinates have trouble flashing mtd roms when starting from ed05. I have to start with dl09 eclair then flash cm7. look in page 2 of this section for my guide. all files needed can be found there aswell. good luck!
hi,
I am sorry if this is a dumb question. But i have failed several attempts while shifting to ICS (RC 5 by team-nyx). Every time when i install ROM & kernel via CWM and boot the device (vibrant t959) it freezes on the screen with VIBRANT and SAMSUNG displaying WHITE on BLACK back ground.
i have gone back to JFD and tried several times BUT same result.
I was on froyo 2.2 (build UVKB5) updated via kies and did it but no luck. I followed wiki.cyanogenmod.com/wiki/Samsung_Vibrant:_Full_Update_Guide and did starting from No. 03 --
downloaded Cmenard's Kernel with the ClockworkMod Recovery 2.5
Heimdall Suite 1.3.2 for windows
AND upto No. 9 under Windows ONLY: section
the CWM installs as it says (A blue transfer bar will appear on the phone showing the kernel being transferred. The device will reboot automatically. )
after that i cleared factory, cache and dalvik cache.
then I select install Zip from SD card and chose the ROM (which is from team-nyx.com/index.php/releases).
after 3% it says rebooting and vibrant shuts down and reboots.. when after I clicked the combo (vol+vol-power) to enter the CWM its not there.. so I reinstall using [heimdall flash --kernel zImage] command in PC's cmd. then after i redid the same to select from SD and then ROM installed ok.
then I selected the kerenel which was taken by same source and installation went normal..
after I select reboot from CWM it reboots and hangs on vibrant screen.
I cannot figure OUT WHAT IM doing WRONG..
Please HELP ME..!!!
thank you for your time
I am moving to 2.2 via kies after going back to stock JFD. then i will root my vibrant. after that i will install ROM manager from market. THEN i will try to FLASH to ICS RC 5 + kernel from nyx TEAM.
I dont know what is wrong.. please HELP
From what you told us it sounds right. Have you tried a different ICS rom? Give ICS slim a try. When you Odin back did you checked re-partition?
Sent from my SGH-T959 using Tapatalk 2
You should try flashing the Gingerbread bootloaders using Odin after you flash back to stock. Those bootloaders can run a Froyo ROM as well as ICS so it wouldn't hurt to do either way. After you flash the bootloader then try flashing the ROM.
And try a different ROM like iwillkillyou suggested. Slim is good, but ICZen is very solid if you're tipping your toes into ICS.
iwillkillyou said:
From what you told us it sounds right. Have you tried a different ICS rom? Give ICS slim a try. When you Odin back did you checked re-partition?
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
hi,
thank you for the reply. No i havent tried a different ROM. yes I checked repartiton when ODin Y this is happening.. I have Flashed this ROM once.. but then when someone calls me they cudnt hear me clearly.. when i initiate the call its ok.. so I moved back to JFD..:/
kaiser_bun said:
You should try flashing the Gingerbread bootloaders using Odin after you flash back to stock. Those bootloaders can run a Froyo ROM as well as ICS so it wouldn't hurt to do either way. After you flash the bootloader then try flashing the ROM.
And try a different ROM like iwillkillyou suggested. Slim is good, but ICZen is very solid if you're tipping your toes into ICS.
Click to expand...
Click to collapse
thank you for the reply.. I jz finished Updating to 2.2 via kies..ok I will flash Gingerbread bootloaders using Odin. I will try I think it wont be necessary to ROOT the vibrant..to Flash Bootloaders.. I am going to Flash the ICS ROM via ROM manager (after rooting via SuperOneclick root2.3.3)..
haarsh said:
thank you for the reply.. I jz finished Updating to 2.2 via kies..ok I will flash Gingerbread bootloaders using Odin. I will try I think it wont be necessary to ROOT the vibrant..to Flash Bootloaders.. I am going to Flash the ICS ROM via ROM manager (after rooting via SuperOneclick root2.3.3)..
Click to expand...
Click to collapse
Just so that you know, everytime you are using Kies, you are running the risk of hardbricking your device. It is notorius for that and in fact someone last week got HBricked with it.
I don't use ROM Manager and probably won't as long as I have a Vibrant. All you need to do is go back to JFD and pull the CWR from my signature and put it on your internal_sd and label it as Update.zip. Then boot into recovery and hit Reinstall PAckages (might have to do this twice) and your stock recovery (blue) will go to CWR (green) and you can flash away.
Also for more detailed instructions, se my ICS install giude also in my signature.
Woodrube said:
Just so that you know, everytime you are using Kies, you are running the risk of hardbricking your device. It is notorius for that and in fact someone last week got HBricked with it.
I don't use ROM Manager and probably won't as long as I have a Vibrant. All you need to do is go back to JFD and pull the CWR from my signature and put it on your internal_sd and label it as Update.zip. Then boot into recovery and hit Reinstall PAckages (might have to do this twice) and your stock recovery (blue) will go to CWR (green) and you can flash away.
Also for more detailed instructions, se my ICS install giude also in my signature.
Click to expand...
Click to collapse
Thank you for the links.. I downloaded and place CWR inside SD. Without kies can we install official releases via Odin.. is there any way.. im sorry if that is a stupid question
No stupid questions. That is why we are here. I am pretty sure there is a flashable 2.2 stock floating aroung here. I personally don't have it though. Custom 2.2's are at this point tweaked so completely out, that they will blow the doors off any 2.2 stock ROM out there. I usggest Moped_Ryder's ROMs and Fishman's Bionix-redux ROMs. Quality, fast and stable. Not ICS, but everything works and no fear of the dreaded Encryption Bug.
PM incoming btw.
Woodrube said:
No stupid questions. That is why we are here. I am pretty sure there is a flashable 2.2 stock floating aroung here. I personally don't have it though. Custom 2.2's are at this point tweaked so completely out, that they will blow the doors off any 2.2 stock ROM out there. I usggest Moped_Ryder's ROMs and Fishman's Bionix-redux ROMs. Quality, fast and stable. Not ICS, but everything works and no fear of the dreaded Encryption Bug.
PM incoming btw.
Click to expand...
Click to collapse
thank you. btw can we Flash to 2.2 via CWM .. directly selecting the ROM from SD .. without Odin
If you can find it, you should be able to. Just put on your card and flash away, taking care to wipe accordingly.
A note on flow though:
2.1, 2.2 -can go into and out of any 2.2 there is laterally.
2.3-4.0 -will need to Odin to stock before going back to a 2.2 ROM. Can move laterally from 4.0 to 4.0 though.
(i.e DO NOT try to restore a 2.2 nandroid or flash a 2.2 ROM when you are on an ICS variant. the /system is completely changed and reformatted. You need to Odin to get it back.)
Moped Ryder uploaded a semi tweaked version of the stock 2.2 build. It's a zip that you can just flash using CWR:
http://forum.xda-developers.com/showthread.php?t=1674519
It comes rooted with busybox and some other goodies, but it's the stock kernel and whatnot. I'd highly recommend Fishman's Bionix-V Mod or Moped Ryder's Slim_Ryder ROMs if you're going to be on Froyo though. They're both great, but I went with Fishman's latest Bionix Mod since I couldn't get bluetooth to work on Moped Ryder's ROM. Which is really unfortunate because I loved Moped Ryder's otherwise.
And you don't have to Odin back to stock if you're just bouncing around Froyo or Eclair builds; only if you're coming from Gingerbread or ICS (2.3 or 4.0).
Keep us updated. I'm curious to see what worked. It's probably the gingerbread loaders. But, who knows.
Sent from my SGH-T959 using Tapatalk 2
Is your Samsung Vibrant (T959) Rooted.?
iwillkillyou said:
Keep us updated. I'm curious to see what worked. It's probably the gingerbread loaders. But, who knows.
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
hi.. I tried again with flashing semaphore kernel through Odin installed CWM version higher than 2.5 to install ICS RC5 by nyx --sorry i need that soo badly so didnt checked anything else ..
@that time I was on vibrant 2.2 UVKB5 (stock)
NOT rooted
I didnt had so called
bootloaders
Click to expand...
Click to collapse
(i dunno what it means though--have to search )
BUT it didnt worked for me instead freezes at Vibrant start-up screen. So i Couldnt switch back to CWM. I Odin back to JFD with repartition clicked and my vibrant was locked (network lock). Finally, I got it cleared by application named Galaxy_S Unlock by Helroz from the market.
Now I am at the very beginning again. I am now on 2.1 JFD. I dont know WHY this happening to me .. :crying:
gonna try again with GB bootloaders.. BUT Im sick of failing and going back to 2.1 (my friends who are having captivate had no problem)
Speedy5150 said:
Is your Samsung Vibrant (T959) Rooted.?
Click to expand...
Click to collapse
At the time i was trying it was NOT rooted.. But now i have it rooted because i needed to unlock the network . which happened me for the very first time after flashing back to JFD using Odin..
Thank you guys for the links and thoughts on 2.2 ROMs.. I am not that expert . Thats why i was updating to 2.2 via KIES -- which is not a good idea as it seems with the ability 2 brick the device. I am going to get Bionix-V FishmanMod V4 FULL and install as http://forum.xda-developers.com/showthread.php?t=1441976 says..
It says Boot into clockwork recovery and i think i found something to do that in this thread http://forum.xda-developers.com/showthread.php?t=734164
I have to get ROM manager from market and go through it..
BUT Im damn upset with the RC5 ICS update by nyx being unable to installed into my device.. I will try with GB bootloaders flashed ..
If you are going to go with Fish's ROM, then all you need to do is Odin back to JFD and pull the CWR from my signature and put it on your internal_sd and label it as Update.zip. Then boot into recovery and hit Reinstall Packages (might have to do this twice) and your stock recovery (blue) will go to CWR (green) and you can flash away.
Fish also has a Odin package that you can flash his ROM through Odin and not have to deal with CWR.
ROM Manager is no longer supporting 2.1, so if you do go back to JFD, then it will be hard to get RM. It is out there somewhere but really all you need is the Update.zip from above to do it. I suggest that you stay on Fish's ROM for awhile and read about ICS installs and all the little things that are involved. If you do flash Fish's ROM, you don't need to mess with the bootloaders.
Btw, aside from Kies, messing with Bootloaders is one of the sure fire ways to hardbrick your device. It only takes seconds to flash them, but do it wrong and, well you know.
Good luck and ask if you have any.
Woodrube said:
If you are going to go with Fish's ROM, then all you need to do is Odin back to JFD and pull the CWR from my signature and put it on your internal_sd and label it as Update.zip. Then boot into recovery and hit Reinstall Packages (might have to do this twice) and your stock recovery (blue) will go to CWR (green) and you can flash away.
Fish also has a Odin package that you can flash his ROM through Odin and not have to deal with CWR.
ROM Manager is no longer supporting 2.1, so if you do go back to JFD, then it will be hard to get RM. It is out there somewhere but really all you need is the Update.zip from above to do it. I suggest that you stay on Fish's ROM for awhile and read about ICS installs and all the little things that are involved. If you do flash Fish's ROM, you don't need to mess with the bootloaders.
Btw, aside from Kies, messing with Bootloaders is one of the sure fire ways to hardbrick your device. It only takes seconds to flash them, but do it wrong and, well you know.
Good luck and ask if you have any.
Click to expand...
Click to collapse
thanks alot for the info brother.. some guys told me STUPID.. but YOU guys are awesome.. I am a newbie to this flashing and stuff.. but learned a lot from XDA . Thanks again for the reply. now I have stock 2.1 with ROOT . (rooted cuz i had to unlock the vibrant). I will flash to Fish's 2.2 ROM soon. BTW may i ask you after moving to Fish's ROM and later if i need to move to ICS still can I do it without messing with Bootloaders..
Thank you
That is what we are here for in the Q&A/General sections.
Regaring your question about Gingerbread bootloaders being needed:::Yes and No.
Gingerbread bootloaders were required in the infancy of ICS ROMs bc they prevented what is called "Rainbows" in your clockwork where you couldn't see anything. The options were there but you just couldn't see them. Then as ICS evolved, the need for GB bl's lessened and now you don't need them at all.
But...There's always a but...Gingerbread bl's are recommended by most of the devs for ICS builds because they seem to work better with the custom recoveries that come with some of the kernels. There is more to it but in short, GB bl's are not required but recommended.
If you go to my ICS install guide, in the middle pages and more again at the end, Yosup (highly respected user) and I have a detailed conversation about bootloaders and their installation. Once he got over the fear and did it, he was hooked and flashing ICS ROMs weekly if not more. It is a very informative section of that thread.
Hello, at the start i wanted to install some new ICS rom for my Vibrant..i try to root it with one click and i couldn't do that coz i had froyo(2.2update)..so i read some forums and found solution in odin...i used that to turn back to stock eclair where i rooted the phone ...but the problem is that now i can't install any application on the device(i need ROM manager)..i get to android market and ,click on application but nothing is happening, no download at all...than i try to use android injection with apks that i found on the net , but nothing, i always get INSTALL_FAILED_OLDER_SDK...so now i am stuck i have: fimware version-2.1 update 1,baseband T959UVJFD, kernel 2.6.29 can you tall me should i do?? thx
Read the guide in my signature on how to install ICS ROMs. It has an update.zip that you can use for CWR.
ROM manager no longer supports 2.1 (Eclair), so that is why you can't see it in the market.
Download the clockwork mod recovery file (update.zip) and save it to the internal storage on the phone. Then reboot into recovery and install packages. Might have to do it twice. Then you'll be in CWM recovery. Install from from there.
Sent from my SGH-T959 using XDA
The AIO Vibrant toolbox might be something you need to look at. you can find it here http://forum.xda-developers.com/showthread.php?t=954509
guide
i followed your guide...flashed CM7, than i try to flash Euphoria RM2.1(ICS) and flashing is starting all ok , than after 30 secs i see message 'Random offset 0x302' and it's not going forward with flashing,i pulled out battery and try 2 more times,and there is always the same problem, i'm on CM7 now(and i don't have google play what should i do? can you recoommand me some good and stable gingerbread ROM for Vibrant(if i goona be unable to install ICS Rom) thx
Woodrube said:
Read the guide in my signature on how to install ICS ROMs. It has an update.zip that you can use for CWR.
ROM manager no longer supports 2.1 (Eclair), so that is why you can't see it in the market.
Click to expand...
Click to collapse
FWIW, and this is not a knock on Team Passion (they do excellent work but few updates), but Euphoria is somewhat outdated. There are plenty of ICS ROMs out there that are more up-to-date and when ICS went from 4.0.3 to 4.0.4 there were significant code changes that were done. I suggest ICZen, or Slim or CM9.
But if you want to stay on Euphoria (AOKP based), this is from my guide:
If you get the RANDOM OFFSET error.
Don't freak out. This is an ICS security feature (as posted in Passion's FAQ post). All you have to do is pull your battery and boot back into recovery and reflash ICS over itself (just like you did with the initial CM7 bootloop) and it should push through. You may need to do this multiple times. I have read of people having to do it up to 5x. YMMV though.
Click to expand...
Click to collapse
Edit:
***----> I am having all kinds of trouble with my browser today at work, so if I don't respond right quick, that is why. But I'll get back to you or some others out there can help.
stack
man, now i am completly stack, i try to flash slim ics, found the file for vibrant, but it culdn't flash , in the middle it just stoped..and phone is just rebooting it self when i enter cw mod i can't install any other ROM from internal sd, it says no files found ffs now i can't even use phone, i need help emergently
Woodrube said:
FWIW, and this is not a knock on Team Passion (they do excellent work but few updates), but Euphoria is somewhat outdated. There are plenty of ICS ROMs out there that are more up-to-date and when ICS went from 4.0.3 to 4.0.4 there were significant code changes that were done. I suggest ICZen, or Slim or CM9.
But if you want to stay on Euphoria (AOKP based), this is from my guide:
Edit:
***----> I am having all kinds of trouble with my browser today at work, so if I don't respond right quick, that is why. But I'll get back to you or some others out there can help.
Click to expand...
Click to collapse
I suggest you Odin immediately. I fear that the next screen you will see is the Encryption Unsuccessful screen. Make sure you hit repartition in Odin though since you reformatted your system from RFS/Ext4 to MTD when you went to CM7.
odin
ok i get into odin , marked repartiton but is sais fail ??? what should i do now?
Woodrube said:
I suggest you Odin immediately. I fear that the next screen you will see is the Encryption Unsuccessful screen. Make sure you hit repartition in Odin though since you reformatted your system from RFS/Ext4 to MTD when you went to CM7.
Click to expand...
Click to collapse
If you do get past all of these, but this is unlikely for a normal flash, get either Iczen or chimera.
Sent from my SGH-T959 using xda app-developers app